staad.pro v8 - filelecture 04 20 m top view front view create the transmission tower whose front...
TRANSCRIPT
STAAD.Pro V8i
www.Machenlink.com
Lecture 04 – Unit 2 (Specifications)
3.5 x 3.0
2.4 x 1.8
3.5 x 3.0
3.9 x 4
3.9 x 2.5
3.9 x 3.18
2 x 2
4
3.5 x1.7
Lecture 04
Plan View
Create a 4 floor building using the plan and define properties for it. All units in meter.
Specifications :1.Height of G.F = 3.5 m
2.Height of floors = 3m
3.Column Size = 0.3 x 0.3 m
4.Beam Size = 0.23 x 0.23 m
1.
Lecture 04
50
2 x 2
Plan view
2. Create a 3 floor model using Radial Grid. All units are in feet.
Specifications :1.Height of G.F = 4 m2.Height of floors = 3.5 m3.Column Size = 0.35m dia4.Beam Size = 0.23 x 0.23 m
Lecture 04
20 m
Top View
Front View
Create the transmission tower whose front view and top view is given and also define the section for it. All units are in meter.
3.
10'
18'
9'
4'
Lecture 04
Front View
Create the transmission tower whose front view is given and define the section for it. All units are in feet.
4.
Lecture 04
5.
72’
18’16’10’
Create the following truss model. (Units are in feet).
Front view
Lecture 04
6m
4m 4m 4m 4m 4m 4m
6. Create the following truss model and define section for it. (Units are in meter)
4m Front view