sse10-wâ„¢ water management systems - polyflon handelsgesellschaft
TRANSCRIPT
FLOW INDICATOR •
FEATURES304 SS VESSEL CONSTRUCTION •
BENEFITSSUITABLE FOR A RANGE OF CHALLENGINGENVIRONMENTS
VISUALLY ALERTS THE USER OF AN INBOARDSEAL FAILURE
NON-RETURN VALVE • PROTECTS PLANT WATER SUPPLY FROMCONTAMINATION, AND MAINTAINS VESSELPRESSURE IN THE EVENT OF SUPPLY INTERRUPTION
SSE10-W™ WATER MANAGEMENT SYSTEMS
WATER REGULATOR • MAINTAINS VESSEL WATER LEVEL AND PRESSURE
BARRIER & BUFFER FLUID SYSTEMS FOR USE WITH DOUBLE MECHANICAL SEALSAESSEAL® supplies an extensive range of barrier and buffer fluid systems for use with double mechanical seals. Wherever possible AESSEAL® prefers to supply both the seal and the
system. In addition the company will suggest suitable barrier or buffer fluids for most applications, based on extensive field experience.
AESSEAL® accepts no responsibility for any problems associated with system design, installation, operation, or the use of an unsuitable barrier or buffer fluid, where the fluid, seal or anypart of the system have not been specified and/or supplied by AESSEAL®
AESSEAL® - Water Management Systems
UK Sales & Technical advice:AESSEAL plcMill CloseTempleboroughRotherhamS60 1BZUnited Kingdom
Telephone: +44 (0) 1709 369966Fax: +44 (0) 1709 720788E-mail: [email protected]: http://www.aesseal.com
USA Sales & Technical advice:AESSEAL Inc.10231 Cogdill RoadSuite 105Knoxville, TN 37932USA
Telephone: +1 865 531 0192Fax: +1 865 531 0571E-mail: [email protected]
Systems Sales & Technical advice:AESSEAL (MCK) Ltd.139A Hillsborough Old RoadLisburnN.IrelandBT27 5QE
Telephone: +44 (0) 28 9266 9966Fax: +44 (0) 28 9266 9977Tel/Fax Hotline: +44 (0) 28 9266 9988E-mail: [email protected]
AESSEAL plc recognise all trademarks and trademark names as the property of their owners.DMSF™, CDSA™, SSE10-W™, SSE10-25™ & SWFF-TF™ are Trademarks of AESSEAL plcRegistered Trademarks: AESSEAL® - AESSEAL plcViton®, Kalrez® - DuPont Dow Elastomers, Aflas® - Asahi Glass Co.
Reference Issue • L - UK/US -SSE10-W - 01AES / DOC / IN 5057 05/2006
Copyright © 2006 AESSEAL plc
THIS DOCUMENT IS DESIGNED TO PROVIDE DIMENSIONAL INFORMATION AND AN INDICATION OF AVAILABILITY.FOR FURTHER INFORMATION AND SAFE OPERATING LIMITS CONTACT OUR TECHNICAL SPECIALISTS AT THE LOCATIONS BELOW.
ALL SIZES ARE SUBJECT TO MANUFACTURING TOLERANCES.WE RESERVE THE RIGHT TO MODIFY SPECIFICATIONS AT ANY TIME.
Distributed by:
USE DOUBLE MECHANICAL SEALSWITH HAZARDOUS PRODUCTS.ALWAYS TAKE SAFETY PRECAUTIONS:
• GUARD YOUR EQUIPMENT
• WEAR PROTECTIVECLOTHING
WARNING
Water enters theW2 Systemthrough the waterregulator (pleasenote that the W2System can onlyregulate thewater pressureavailable in theplant water line)
The barrier fluidis pressurizedto 1 Bar abovethe sealchamberpressure
Barrier fluid iscirculated from theVessel through theMechanical Seal andback to the Vessel bythe thermosyphoneffect.
1
2
3
S P E C I F I C AT I O N S
W2 Operating Principle
The AESSEAL® SSE10-W™ and SSE25-W™ vessels are used as the core of a modular Water Management System range (W1-W4). The environmentally friendly W Systems range have significantly contributed to the global drive for water conservation,saving industry over 3 billion gallons of water per year. This Systems range starts with the W1, which is a non-pressurizedAPI plan 52 Buffer System used to provide cooling to mechanical seal faces. The W1-W4 are all piped as API plan 53 WaterManagement Systems. The W2 and W3 are the most commonly used Systems. The W2 is the standard offering while the W3is designed for high heat dump requirements. The W4 is a highly instrumented package for more challenging applications.All vessels are designed and manufactured in accordance with PED and ASME VIII Div.1 requirements.
Standard Offering:
Vessel:
- Construction: 304 Stainless Steel - Pressure Limit: 16 Bar (230 psi)- Temperature Limit: 100 ºC (212 ºF)- Capacity: 10 litres (2.64 US Gallons), (25 litres (6.60 US gallons) option)- Connections: 1/2” NPT for seal feed and return hoses*- Finish: Satin bead blast- Designed to ASME VIII Div.1 and compliant with European PED- Finish: White Powder Coat
System (W2):
- Flow Indicator: SS- Air Vent Valve: Brass- 12mm (1/2") Hose Kit- Ball Valve (Drain): Nickel Plated Brass- Water Supply Regulator: Brass (SS
option available)- Pressure Gauge: Brass (SS option
available)- 3-way valve: Brass (SS option
available)
Optional Extras:
- Pressure Gauge: Brass/SS options - Cooling Coil- Finned Tubing- Pressure Switch: Explosion Proof and
Intrinsically Safe options- Level Switch: Explosion Proof and
Intrinsically Safe options- SS Braided flexible hose- In line water filter
* all finished W Systems come complete with Brass Fittings.
DMSF™ CDSA™
The Pressure Systems aremost commonly used withthese seals:
SWFF-TF™(Incorporatesthe Flow Fuseand Thermal
Fuse)