specifications/price list cma cnc controlled gantry …smdmachinery.com/pdfs/specs cma grd gantry...

Price List January 2015

Specifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD 25 - 42 CNC and GRD 60Z CNCZ

This newly concepted drilling machine is designed for the fully automatic execution of drilling work in products with rather big outer dimensions. The X- (longitudinal), Y- (perpendicular) and Z-(vertical) movement (RPM, feed-rate and drill depth) are programmable on the centrally placed touch-screen control. The spindle delivers a wide range of variable speeds by means of an 8.9 kW A-synchronic motor. All axes are equipped with double, over-dimensioned, top quality (INA - THK), hardened and precision ground linear guides. The drilling-head movement is executed by an a-synchronic motor through an over dimensioned ball-screw system (The full head moved in Z-direction, not the spindle) with a stroke of 500 mm (19.685"). The drill head's feed-rate is variably adjustable. Because of this, short cycle times go hand in hand with long tool-life (for optimal cutting -conditions). Beside a standard drilling cycle, other sequences can be programmed like: jump-feed drilling for tube & profiles, deep-hole drilling with chip-breaking, counter sinking, tapping and flow-drilling (low feed-rate during warming up and subsequently a high feed-rate). GRD CNCZ 60 4530 (X/Y 4,5 x 3 m)

of 17 Price List January 2015

Machines are available in different work-dimensions (X-Y) from 3000 mm x 1200 mm (10' x 47.2") up to 20.000 mm x 4.000 mm (65' - 13.5')

GRD 60 CNCZ 3012 (X-Y 3000 x 1200 mm)

GRD 60 CNCZ 3030 (X-Y 3000 x 3000 mm)

GRD 60 CNCZ 13030 (X-Y 13000 x 3000 mm)

GRD 60 CNCZ 6412 (X-Y 6400 x 1800 mm) With Stepped Down Bed & Vertical T-Slotted Table. Upper

Table Height 680 mm (58")

Optional Indexing station (4th axis)

GRD with 4th axis for working tubes 8 meter x 400 mm


THK or INA Linear Guides

Automatic Tool Changer with 12 Stations

Chip Removal & Conveyor System


1. Spindle BT 40 (BT 50 with GRD CNCZ 60 models)

- 5-bearings diameter 110/60 mm (3x angular contact type 7212, 2x standard type 6212)

- Suitable for high axial and radial loads = drilling and milling

2. Guidance system X-axis

- 45 mm linear guide with 2 bearing blocks with circulating balls

3. Driving system X-axis

- Helical precision rack and pinion, stroke 3-20 m

4. Guidance system Y-Axis

- 2x 45 mm linear guides, each with 2 bearing blocks with circulating balls

5. Driving system Y-axis

- helical precision rack and pinion, stroke 1,2 / 1,7 / 2,4 or 3 m (larger on request)

6. Guidance system Z-axis

- 2x 45 mm linear guides, each with 2 bearing blocks with circulating balls

7. Driving system Z-axis

- 32 mm ball-screw, stroke 500 mm

8. LAPP cables and IGUS energy chains (Germany)


OMRON TOUCH SCREEN CONTROL Dialogue & DIN/ISO Programming, the best of both worlds ! The control, in multiple aspects, is the heart of the machine. Because of that, it has to offer a combination of ease of working, precise and reliable.

Programming:

Easy to program means several things: All applications have to be completely programmed in a simple fashion. During the programming, the operator should not be burdened by hundreds of possibilities to choose from and that he doesn't need for the job or that he needs to enter as routines that are superfluous because they don't play a roll. The control should only show the required functions that are needed and ask for the data needed to perform that function. In short: Just the required data, no more no less. To realize that, the software that lies behind the "interface" has to be open. This means that CMA, the manufacturer of these NC drilling machines, has the possibility to configure the software to a make a great fit for the operator. Based on specific operator suggestions, the software can be optimized. (Example: to add a function symbol, or a routine for a particular product run) The OMRON Control offers you these possibilities. Therefore, OMRON is not only CMA's preferred system, but also the end-user's preferred system.

The OMRON control offers these possibilities. Therefore, OMRON is not only the right system for CMA, but also for you the optimal choice. Dialog programming for coordinate and standard work-cycles Simply enter the required data and save it under a logical name. The complete work cycle of the part (or different parts that are clamped on the machine simultaneously) are entered in a sequence list and stored. The programmed parts can be worked in a serie of parts at once or, for instance, be worked in a “pendle-mode”. Load-unload on one side while working the other side.


Dialogue programming of coordinates and standard working cycles Simply enter the data in the macro and save under a (logical) name. The complete job (even several different work pieces clamped simultaneously) can be programmed in a sequence. The operator can choose to produce all parts in 1 run or work in 2 areas (loading new parts while machine is producing in the other area).


Control OMRON 12” colour touch-Screen PC and PLC Acurax NJ301. Drillwin NJ 13: Write programs on an external PC / Laptop

Coordinate systems

Depth-programs

Sequences Windows XP operating system. PC memory; 3GB. Programming of coordinates through 3 dialog-menu’s

single-hole (random pattern)

grid of holes (single or multiple lines)

flange 50 programmable zero-points. 3 axes controlled (X,Y,Z) – Depth (Z): Is possible to program Different speed for any part of column descend. (One speed some m/m, faster/slower other part,….)

Plate drilling cycles.

Profile drilling cycles.

Thermal drilling cycle.

Tapping cycles.

Light milling cycles.

Counter sinking cycles.

Chip breaking cycles.

Deep drilling cycles. Programmable JOB table for easy setup of several programs/products which are executed automatically (each line of the JOB consists of zero-point, coordinate, Depth (Z), Tool,….) The machine can be connected to your network thru an Ethernet cable RJ45. USB plug to load programs with a memory stick. The machine is connected to your network through an Ethernet cable, with the laptop that is provided with the machine.


Free programming in ISO (G-codes) at the machine: Standard cycles like drilling, tapping, countersinking, flowdrilling, circular and oblong milling are programmable through macros. Cycles which are not included in the macros can be programmed in ISO (G-codes). In ISO it’s possible to program complex shapes with interpolated X/Y-movements. The system offers 3-axis (X/Y/Z) interpolation for helical milling and Thread-milling.


External Programming:

Drillcam Package from Vandenbussche The Drillcam Package is an ideal solution for programming more complex parts. Besides converting DXF, DWG, DSTV data, the CAM3000 software offers a drawing packages A special feature of the software is the possibility to increased automation and optimisation by means of smart macro‘s. - Programmed items like material, thickness and hole diameter are automatically recognized

at future, similar jobs. This means that in those cases no additional programming is required - Surface heights of claming systems are already known. Just enter where you want to place

the part: on the table, at the base of the vice of at the recessed pockets of the top of the vice. Enter the approach feed-rate an work feed-rate and the Z-axis movement is automatically set.

- A variation of holes: blck hole, through hole, tapped hole, countersunk hole, through and through hole are automaticall recognized by their specific color and the right tooling is automatically being programmed as well (one tool or a combination of tools) plus the positions as well as the Z-axis values are automatically being programmed.

- Multiple (different or identical) parts can simply be allocated to already defined zero-points or clampingsystems. The whole cycle is then automatically being programmed

See here how the Drillcam software works: Also see here the same software but with ISO correction option:

https://www.youtube.com/watch?v=s-tRl6Deezw

https://www.youtube.com/watch?v=s-tRl6Deezw


Drive system, RPM range, Torque and Drilling capacities: The machines are available with 2 different spindle drive systems. This to offer you an optimal RPM and torque range for every job you want it to do.


Executions: The GRD 25, 28, 32, 38 and 42 respectively drill a max hole diameter of 25, 28, 32, 38 or 42 mm and have a max RPM of resp. 5000, 4000, 3000, 2400 or 2000 RPM. (or a custom speed range). This speed range has to be decided upon at moment of order. The GRD 60 CNCZ comes with a ZF gear box with 2 automatically shifting speed ranges. 50-1000 / 1000 - 4000. GRD 25 CNC. (one speed range) Driven by an 8.9 kW Motor, RPM Range 50 - 5000 RPM. Drilling Capacity in Mild Steel 25 mm and tapping capability up to M16 GRD 28 CNC. (one speed range) Driven by an 8.9 kW Motor, RPM Range 50 - 4000 RPM. Drilling Capacity in Mild Steel 28 mm and tapping capability up to M16 GRD 32 CNC. (one speed range) Driven by an 8.9 kW Motor, RPM Range 50 - 3000 RPM. Drilling Capacity in Mild Steel 32 mm and tapping capability up to M20 GRD 38 CNC. (one speed range) Driven by an 8.9 kW Motor, RPM Range 50 - 2400 RPM. Drilling Capacity in Mild Steel 38 mm and tapping capability up to M24 GRD 42 CNC. (one speed range) Driven by an 8.9 kW Motor, RPM Range 50 - 2000 RPM. Drilling Capacity in Mild Steel 42 mm and tapping capability up to M27 GRD 60Z CNCZ Driven by a 13.1 kW Motor and BT50 Spindle in combination with an automatically shifting ZF Gear Box for low RPM's with more torque). RPM Range from 50 to 4000. Drilling Capacity in Mild Steel up 60 mm and tapping up to M36 Data based on 44W Mild Steel: HSS-Co Tooling with at least TiCN-Coating and a Cutting Speed of 45 m/min.


Standard execution & components - Controlled 2 axis interpolation + s axis interpolation (X-Y-Z) for helical milling - Automatic Tool Changer 12 station (GRD CNC 25 – 42) and 10 stations GRD CNCZ 60 mm - Spindle driven by a-synchronic 8.9 kW motor (GRD CNC 25 – 42) and 13. 1 kw GRD CNCZ 60 mm - Low pressure coolant system (emulsion) - Coolant splash screens on both sides of the gantry - Column movement controlled Z Axis incl.1 fast approach and 2 progr. feed rates in drilling mode - Open table carrying beams in X-direction, executed with t-slots - Tool ejector - Automatic tool calibrator (touch-off) - Maintenance free auto-lubricating guide-elements on all axes - Automatic tapping system included - Chip removal by means of a screw conveyor - Spindle BT-40 with automatic clamping BT-50 at GRD CNCZ 60 mm machine - Fixed screen for coolant splash protection - Built on control panel with possibility to program drilling jobs and light milling cycles. - Additional pedestal for start / stop and emergency stop button - Safety area on the back of the machine by means of light curtains.

(Additional safety measures on the sides and front may be necessary) - THK or INA linear guides and ball screw-spindle for 20.000 km maintenance free travel - LAPP electrical cables - SMC (Japan) or Festo Pneumatic components - Omron (Japan) PLC Sysmac CJ2M CPU14 and Yaskawa controls, PLC's, Servo controls / motors for X-Y-Z

axes movement - 400V Main connection (Step down transformer 575 V or other voltage to 400 V come in addition) Electrical components according to CSA standard Remote access capabilities to the machine through the internet Before installation, the customer establishes the Ethernet network connection 3 x IP addresses: 1 IP for included laptop, 1 IP for machine’s PLC and 1 IP for machine’s Control PC) The customer arranges: An Ethernet connection (RJ45) from the machine to his network.

This to provide remote access to the machine for our service technicians:

The tying in of the machine to the customer's network is not a part of the installation.

Without this Ethernet connection and IP Addresses arranged, we will also charge travel time during the warranty time, in case of trouble shooting. Operator Safety: At all times the operator needs to be safe when operating this machine. Therefore we offer light curtains and are open for other CSA approved means of protecting the operators, such as area sensors. Specifications:


Technical Data GRD 3012 3017 4512 4517 6012 6017 7512 7517 9012 9017

Length work area in mm / inches

3000 118.1

3000 / 118.1"

4500 / 177.1"

4500 / 177.1

6000 / 236.2

6000 / 236.2

7500 / 295.2

7500 / 295.2

9000 / 354.3

9000 / 354.3

Width work area in mm / inches

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

Head travel in X in mm / inches

3000 118.1

3000 / 118.1"

4500 / 177.1"

4500 / 177.1

6000 / 236.2

6000 / 236.2

7500 / 295.2

7500 / 295.2

9000 / 354.3

9000 / 354.3

Head travel in Y in mm / inches

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

1200 / 47.2

1750 / 68.8

Head travel in Z in mm 500 mm

Distance under the spindle (optionally to be modified) 135 – 635 mm

Spindle adaption BT 40 MAS 403 BT (or optionally CAT-40) BT-50 at GRD CNCZ 60 or optionally CAT 50)

Main motor 8,9 kW GRD 25 - 42 GRD CNCZ 60 13.1 kW incl. ZF-Gearbox)

Drill feed rates (variable) 2 – 4.800 mm/min.

Gantry traverse speed in X Gantry traverse speed in Y

30 meter/min. 30 meter/min.

Table height 870 mm (34.2") (optionally higher or lower)

Weight in kg 5900 6900 7100 8400 8300 9900 9500 11400 10700 12900

Technical Data GRD Wide models

3024 3030 4524 4530 6024 6030 7524 7530 9024 9030

Length work area in mm / inches

3000 118.1

3000 / 118.1

4500 / 177.1

4500 / 177.1

6000 / 236.2

6000 / 236.2

7500 / 295.2

7500 / 295.2

9000 / 354.3

9000 / 354.3

Width work area in mm / inches

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

Head travel in X in mm / inches

3000 118.1

3000 / 118.1"

4500 / 177.1"

4500 / 177.1

6000 / 236.2

6000 / 236.2

7500 / 295.2

7500 / 295.2

9000 / 354.3

9000 / 354.3

Head travel in Y in mm / inches

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

2400 / 94.4

3000 / 118.1

Head travel in Z in mm / inches 500

Distance under the spindle (optionally to be modified)

135 – 635 mm (optionally more)

Spindle adaption BT 40 MAS 403 BT (or optionally CAT-40) BT-50 at GRD CNCZ 60 or optionally CAT 50)

Main motor 8,9 kW GRD 25 - 42 (GRD CNCZ 60 13.1 kW incl. ZF-Gearbox)

Drill feed rates (variable) 2 – 4.800 mm/min.

Gantry traverse speed in X Gantry traverse speed in Y

30 meter/min 30 meter/min

Table height 870 mm (optionally higher or lower)

Weight in kg 7700 8500 9350 10550 10600 12200 11900 13900 13200 15600

Machine colours Blue & Grey combination


0 Machine model CAD funds FOB Port of Entry Canada

1

Automatic tool calibrator

2

External Coolant System (low Pressure emulsion)

3

Through the spindle coolant system pressure 58 PSI (4 bar) incl. splash- protection area around the drilling position

Through the spindle coolant system pressure 101 PSI (7 bar) incl. splash- protection area around the drilling position

4

Automatic Micro-spray lubrication system for drilling in profiles (max wall thickness app 6 mm for this to function well)

5

Unist Paste dispenser for flow drill application (Metal lance)

Unist Oil dispenser for thread-forming applications (Metal Lance)

6

Renishaw automatic zero-point detector: Renishaw model OMP 60 Optical transmission probe Renishaw model RMP 40 Radio transmission probe

Renishaw detecting samples


7

Adjustable pneumatic vice for plates.(75 lbs)

8

Adjustable mechanical vice for tubes. Beams (132 lbs)

9

Drillcam - 2D designer software. - Read any kind of 2D or 3D drawing and convert easily in CMA files; X,Y Coordinates programs, Depth programs (Z), Tools, Zero points and Program cycle (Floe sequence). Easy for working with several surfaces.

- Send and download programs.

10

11

4th axis electronic dividing head DCN-250. Universal 3-jaw-chuck 200 mm head-stock with 175 mm height (Y-Axis sliding table with digital read out and positioning wheel are extra)

12

Y-Axis sliding table incl. positioning wheel and digital read out for faster aligning tubes (clamped in the rotating dividing head) against fixed table vice's back-supports during job change-over's

13 Clamps for round tubes / pipes available


14

15

Work and Safety Area Detectors on both sides along the gantry

in Y-axis. (additional / alternative safety measures

may be required.

Machine Length

3000

4500

6000

7500

9000

16

CAT-40 taper spindle adaption instead of

BT-40


17

BT-50 taper spindle adaption instead of

BT-40

18

ATC Automatic Tool Change system for 12

tool stations BT-40

19

ATC Automatic Tool Change system for 10

tool stations BT-50

Automatic fixed toolchanger 7stations BT50 Rack positioned

on bed

20

12" touch screen and programming console on sliding rail moving along the X-axis.

Machine Length

3000 mm

4500 mm

6000 mm

7500 mm

9000 mm

21

12" touch screen on console (optionally on linear guide price on request, depending on length machine)

22 Transformer 575 V - 400 V Local specs to be detailed

23

Z-Reader Depth Sensor to determine the exact part height

specifications/price list cma cnc controlled gantry …smdmachinery.com/pdfs/specs cma grd gantry...

Documents