specification sheet - fc lighting · series voltage temperature cri led lumens finish optics...

SERIES VOLTAGE TEMPERATURE CRI LED LUMENS FINISH OPTICS OPTIONS UNV 3K CR83 5L 500 Lm (5W) BK Black 15 Spot-15° LD LED Dimming ( 0–10V ) 4K 10L 1000 Lm (10W) WH White 25 Narrow Flood-25° LED Dimming Standard 15L 1500 Lm (15W) BZ Bronze 40 Flood-40° 20L 2000 Lm (20W) SL SIlver 60 Wide Flood-60° 25L 2500 Lm (26W) 30L 3000 Lm (33W) FCC600 - 10" - SF 75 pcs or Less / ships in 2 weeks * 6" Round Surface Mounted Die-Cast Aluminum Cylinder with Down Light. QUICK SHIP ORDERING * Terms & Conditions for our quick ship program are located on our website: fclighting.com FCC600 - 10" - W 50 pcs or Less / ships in 2 weeks * 6" Round Wall Mounted Die-Cast Aluminum Cylinder with Down Light. FCC600 - 10" - P 25 pcs or Less / ships in 2 weeks * 6" Round Pendant Mounted Die-Cast Aluminum Cylinder with Down Light. FCC600-10-SF FCC600-10-P FCC600-10-W Date: Approved: Type: Fixture: Project: SPECIFICATION PHYSICAL housing marine grade, corrosion resistant, heavy walled, high pressure, die-cast aluminum; captive stainless steel tamper resistant hex socket screws lens lens is 1/4" thick clear, tempered glass with precision formed semi-specular aluminum for maximum reflectance mounting mounts directly to standard recessed gem box; additional mounting holes allow unit to be attached directly to mounting surface pendant (18 inch standard) with swivel canopy ingress protection continuous silicone gasket to seal out contaminants, IP65 rated for dry, damp or wet locations finish UV stable polyester powder coat PERFORMANCE lifetime > 70,000 hours / L70 or better color consistency 3-step MacAdam Ellipse / CRI typical 85 temperature operating: -13°F to 104°F (-25°C to 40°C) | start up: -13°F to 104°F (-25°C to 40°C) | storage: -40°F to 176°F (-40°C to 80°C) junction temperature 73°C @ TA 25°C warranty 5 year limited warranty (refer to website for details) ELECTRICAL input voltage 120V or 277V AC power supply integral Class II, electronic high-power factor > 94% @120V standards ETL / cETL / LM-80 power consumption 33W @ 3000 Lm 120V-277V Max | 5W @ 500 Lm 120V-277V Min interface 0-10V Dimming Quick Ship Specification Sheet JS Rev. 0319 a US Commercial Lighting Manufacturer Since 1982 Expanded Disclaimer: Due to continuous development and improvements, specifications are subject to change without notice. FC Lighting and Solid State Luminaires reserves the right to change lab test details or specifications without notice. Product use certifies agreement to Solid State Luminaires terms and conditions. FCC Series Cylinder Lights are engineered and produced in our Illinois manufacturing facility.

Upload: others

Post on 18-Jan-2021

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

SERIES VOLTAGE TEMPERATURE CRI LED LUMENS FINISH OPTICS OPTIONS

UNV 3K CR83 5L 500 Lm (5W) BK Black 15 Spot-15° LD LED Dimming (0–10V)

4K 10L 1000 Lm (10W) WH White 25 Narrow Flood-25° LED Dimming Standard

15L 1500 Lm (15W) BZ Bronze 40 Flood-40°

20L 2000 Lm (20W) SL SIlver 60 Wide Flood-60°

25L 2500 Lm (26W)

30L 3000 Lm (33W)

FCC600 - 10" - SF75 pcs or Less / ships in 2 weeks*

6" Round Surface Mounted Die-CastAluminum Cylinder with Down Light.

QUICK SHIP ORDERING

* Terms & Conditions for our quick ship program are located on our website: fclighting.com

FCC600 - 10" - W50 pcs or Less / ships in 2 weeks*

6" Round Wall Mounted Die-CastAluminum Cylinder with Down Light.

FCC600 - 10" - P25 pcs or Less / ships in 2 weeks*

6" Round Pendant Mounted Die-CastAluminum Cylinder with Down Light.

FCC600-10-SF FCC600-10-P FCC600-10-W

Date: Approved:

Type:

Fixture:

Project:

SPECIFICATION

PHYSICAL

housing marine grade, corrosion resistant, heavy walled, high pressure, die-cast aluminum; captive stainless steel tamper resistant hex socket screws

lens lens is 1/4" thick clear, tempered glass with precision formed semi-specular aluminum for maximum reflectance

mounting mounts directly to standard recessed gem box; additional mounting holes allow unit to be attached directly to mounting surface pendant (18 inch standard) with swivel canopy

ingress protection continuous silicone gasket to seal out contaminants, IP65 rated for dry, damp or wet locations

finish UV stable polyester powder coat

PERFORMANCElifetime > 70,000 hours / L70 or better

color consistency 3-step MacAdam Ellipse / CRI typical 85

temperature operating: -13°F to 104°F (-25°C to 40°C) | start up: -13°F to 104°F (-25°C to 40°C) | storage: -40°F to 176°F (-40°C to 80°C)

junction temperature 73°C @ TA 25°C

warranty 5 year limited warranty (refer to website for details)

ELECTRICALinput voltage 120V or 277V AC

power supply integral Class II, electronic high-power factor > 94% @120V

standards ETL / cETL / LM-80

power consumption 33W @ 3000 Lm 120V-277V Max | 5W @ 500 Lm 120V-277V Min

interface 0-10V Dimming

Quick Ship Specification Sheet JS Rev. 0319a US Commercial Lighting Manufacturer Since 1982

Expanded Disclaimer: Due to continuous development and improvements, specifications are subject to change without notice. FC Lighting and Solid State Luminaires reserves the right to change lab test details or specifica-tions without notice. Product use certifies agreement to Solid State Luminaires terms and conditions. FCC Series Cylinder Lights are engineered and produced in our Illinois manufacturing facility.