space valve catalog ecr

K C Y M K C Y M

The Space Valve brand is the recognized leaderin the marine valve industry. We've earned thisreputation since 1968 through our commitmentto provide customers with a high quality, reliableproduct designed specifically to stand up to therigorous conditions of the marine industry.

SPACE valves are highly used throughout theworld on barges, container ships, tankers,offshore rigs, ferries and fishing boats. Thequality, workmanship and integrity of SPACEvalves allow you to feel confident that ourproduct will meet your valve needs.

SPACE has a proprietary design that preventscommon problems of galling. In the commonsize non-rising stem valves; we've upgraded thestem packing with high quality packing thatprovides higher lubricity and better protectionfor the valve stem. W&O tests and certifieseach valve. Once tested and inspected, thevalves are documented, tagged and distributedto our branches located throughout the UnitedStates and Internationally.

SPACE valves are available from stock asOS&Y and NRS Gates, Swing Checks, Globes,Angles and Stop Checks in sizes 2” through24”. They can also be produced in sizes up to54”. The SPACE line is available in hard-to-getmarine sizes such as 3 1/2 and 5 inch. SPACEcast steel valves are also available in marinebronze, CR-13, 316 stainless, Monel and fullstellite trims. Our valve shop can alsocustomize and modify SPACE cast steel valveswith indicators, by-passes, reach rod systems,actuators and many other options.

SPACE valves are an ABS Type ApprovedProduct as well as API 6D Certified. We canalso furnish certification to Det Norske Veritas,Lloyds, and Germanischer Lloyds with in-housetesting at our facility in Jacksonville, Florida.

SPACE valves have a proven track record ofreliability and performance. This reputation, plusour commitment to provide an excellent productthat meets the strict requirements of the marineindustry, makes SPACE the logical choice formeeting your sea water, fresh water, steam oroil system requirements.

Table of Contents

SPACE Figure Numbers 3

Gate Valves 4-8

Globe Valves 9-11

Angle Valves 12-14

Stop Check Globe 15

Swing Check Valves 16-18

Lift, Angle &Tilt Disc Check 19

Bellow Seal Gate 20

Double Disc Gate 21

Spectacle Type 22

Special Options 23

Engineering Data 24-27

Product Warranty 28

800.962.9696 © 2007, W&O Supply, Inc. All Rights Reserved

QUALITY COMMITMENT

APPLICABLE STANDARDSSteel Valves, ANSI B16.34-1977, Standard ClassFace-to-face, End-to-end, ANSI B16.10End Flanges, ANSI B16.5Weld Ends, ANSI B16.25

PART MATERIALS ASTM SPEC.

Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBStuffing box Carbon steel A216 Gr. WCBWedge Carbon steel A216 Gr. WCBWedge facing Bronze ASTM B150/C62400Seat ring Bronze ASTM B150/C62400Stem Bronze ASTM B505/C95400Wedge nut Ductile Iron A439 TY D2Back-seat bushing Bronze ASTM B505/C95400Gland Carbon steel ASTM A276-420Gland flange Carbon steel A216 Gr. WCBGland eyebolt Carbon steel A193-B7Gland eyebolt nut Carbon steel A194-2HBonnet stud bolt Carbon steel A193-B7Bonnet stud bolt nut Carbon steel A194-2HBonnet gasket Non Asbestos CommercialStem packing Graphite CommercialHandwheel Ductile Iron A395Handwheel nut Carbon steel A194-2H

DIMENSIONS IN INCHES:

SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 7 7.5 8 8.5 9 9.5 10.5 11.5 13 14 15 16 17 18 20H Height (Open) 12.9 15 15.5 17.6 18.6 22 23.2 27.6 31.35 34.5 37.6 43.75 47.3 54.4 64W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 17.75 19.75 21.65 23.65 27 30Weight (lbs) 49 68 87 108 119 199 243 354 534 778 1043 1310 1600 1950 2250

NRS GATE VALVE150 LBBRONZE TRIM

800.962.9696 © 2007, W&O Supply, Inc. All Rights Reserved4


Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBStuffing box Carbon steel A216 Gr. WCBWedge Carbon steel A216 Gr. WCBWedge facing CR13 A216 TY 410Seat ring CR13 A105/HF OverlayStem CR13 A276 TY410Wedge nut Ductile Iron A439 TY D2Back-seat bushing CR13 A276 TY 410Gland CR13 A276 TY 410Gland flange Carbon steel A216 Gr. WCBGland eyebolt Carbon steel A193-B7Gland eyebolt nut Carbon steel A194-2HBonnet stud bolt Carbon steel A193-B7Bonnet stud bolt nut Carbon steel A194-2HBonnet gasket Reinforced Graphite Commercial*Stem packing JC1065 CommercialHandwheel Ductile Iron A395Handwheel nut Carbon steel A194-2H

* All 15021C Valves provided with John Crane 1065 Stem Packing Rings


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 7 7.5 8 8.5 9 9.5 10.5 11.5 13 14 15 16 17 18 20H Height (Open) 12.9 15 15.5 17.6 18.6 22 23.2 27.6 31.35 34.5 37.6 43.75 47.3 54.4 64W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 17.75 19.75 21.65 23.65 27 30Weight (lbs) 49 68 87 108 119 199 243 354 534 778 1043 1310 1600 1950 2250


NRS GATE VALVE150 LBCR13/HF TRIM

© 2007, W&O Supply, Inc. All Rights Reserved www.wosupply.com 5



Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBYoke Carbon steel A216 Gr. WCBWedge Carbon steel A216 Gr. WCBWedge facing Bronze ASTM B150/C62400Seat ring Bronze ASTM B150/C62400Stem Brass ASTM B505/C95400Yoke nut Ductile Iron A439 TY D2Yoke nut retainer Carbon steel A216 Gr. WCBBack-seat bushing Bronze ASTM B505/C95400Gland Carbon steel ASTM A276-420Gland flange Carbon steel A105Gland eyebolt Steel A193-B7Gland eyebolt nut Steel A194-2HBonnet stud bolt Steel A193-B7Bonnet stud bolt nut Steel A194-2HBonnet gasket Reinforced Garphite CommercialStem packing Graphite CommercialHandwheel Ductile Iron A395Handwheel nut Carbon steel A194-2H


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 7 7.5 8 8.5 9 9.5 10.5 11.5 13 14 15 16 17 18 20H Height (Open) 15.375 17.25 19 21 23 25.5 30.125 37.65 45.25 53.25 59.4 67 74.5 83.5 98.5H Height (Closed) 13 15 15.5 17.6 18.6 22 23.75 29 34.6 40.5 45.3 51 26.3 63.25 74W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 18 19.75 21.65 23.62 26.75 30Weight (lbs) 44 62 79 98 108 181 221 322 485 706 948 1191 1502 1940 3109

OS&Y GATE VALVE150 LBBRONZE TRIM



Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBYoke Carbon steel A216 Gr. WCBWedge Carbon steel A216 Gr. WCBWedge facing CR13 A276 TY 410Seat ring CR13 A105/HF OverlayStem CR13 A276 TY 410Yoke nut Ductile Iron A439 TY D2Yoke nut retainer Carbon steel A216 Gr. WCBBack-seat bushing CR13 A276 TY 410Gland CR13 A276 TY 410Gland flange Carbon steel ASTM A216-WCBGland eyebolt Steel A193-B7Gland eyebolt nut Steel A194-2HBonnet stud bolt Steel A193-B7Bonnet stud bolt nut Steel A194-2HBonnet gasket Reinforced Garphite CommercialStem packing JC1065 CommercialHandwheel Ductile Iron A395Handwheel nut Steel A194-2H

* Wedge - 2-10” ASTM A217-CA15, CR13 Overlay* All 15011C Valves provided with John Crane 1065 Stem Packing Rings

APPLICABLE STANDARDSSteel Gate Valves API 600Steel Valves, ANSI B16.34-1977, Standard ClassFace-to-face, End-to-end, ANSI B16.10End Flanges, ANSI B16.5Weld Ends, ANSI B16.25


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 7 7.5 8 8.5 9 9.5 10.5 11.5 13 14 15 16 17 18 20H Height (Open) 15.375 17.25 19 21 23 25.5 30.125 37.65 45.25 53.25 59.4 67 74.5 83.5 98.5H Height (Closed) 13 15 15.5 17.6 18.6 22 23.75 29 34.6 40.5 45.3 51 26.3 63.25 74W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 18 19.75 21.65 23.62 26.75 30Weight (lbs) 44 62 79 98 108 181 221 322 485 706 948 1191 1502 1940 3109

OS&Y GATE VALVE150 LBCR13/HF TRIM



OS&Y GATE VALVE300-600-900-1500 LBCR13/HF TRIM

300 LB DIMENSIONS IN INCHES:

SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 8.5 9.5 11.125 11.875 12 15 15.875 16.5 18 19.75 30 33 36 39 45H Height (Open) 16.125 18 20 24 24 27.75 31.75 39.5 47.5 55.75 62.25 68 75.5 91 105H Height (Closed) 13.75 15 16.5 19.5 19.5 22.2 25.2 30.75 37 43 48.25 52 58 70.5 80.25W Handwheel Diam. 8 8 10 10 10 12 12 15.75 17.75 20 22 24 27 30 35.5Weight (lbs) 65 78 110 149 172 231 335 541 794 1125 1720 2390 3100 4045 6150


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14”* 16”* 18”* 20”* 24”*L Face to Face RF 11.5 13 14 15 17 20 22 26 31 33 35 39 43 47 55H Height (Open) 16.5 18.75 20.5 25.5 25.5 30.25 33 40.25 48.5 57 61.75 70.75 75.5 87 101.5H Height (Closed) 14 15.75 17 21 21 24.75 26.5 32 38 44.5 61.75 70.75 75.5 87 101.5W Handwheel Diam. 8 10 10 12 12 16 18 20 24 27 24 24 24 24 24Weight (lbs) 90 128 195 290 290 400 560 910 1370 1960 2740 3365 4330 5390 7965*Sizes are provided with gear operator, as seen on page 23. Dimension is valve height from center of waterway bore including operator.


SIZE 2” 2-1/2” 3” 4” 6” 8” 10”* 12”*L Face to Face RF 14.5 16.5 15 18 24 29 33 38H Height (Open) 19.25 22.75 23 26.75 35.50 43.5 53 60H Height (Closed) 13.75 15 16.6 19.5 25.2 30.75 53 60W Handwheel Diam. 10 12 12 14 20 24 24 24Weight (lbs) 165 290 222 380 740 1410 2420 3520*Sizes are provided with gear operator, as seen on page 23. Dimension is valve height from center of waterway bore including operator.


SIZE 2” 2-1/2” 3” 4” 6” 8”* 10”* 12”*L Face to Face RF 14.5 16.5 18.5 21.5 27.75 32.75 39 44.5H Height (Open) 19.25 22.75 23.75 27.5 38.75 45.75 54 64.5H Height (Closed) 13.75 15 16.6 19.5 25.2 45.75 54 64.5W Handwheel Diam. 10 12 14 16 20 24 24 24Weight (lbs) 165 290 365 545 1285 2025 4200 6920*Sizes are provided with gear operator, as seen on page 23. Dimension is valve height from center of waterway bore including operator.




Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBYoke Carbon steel A216 Gr. WCBDisc Carbon steel ASTM A105/BRZ OverlayDisc facing Bronze ASTM B150/C62400Disc nut Bronze ASTM B505/C95400Seat ring Bronze ASTM B150/C62400Stem Bronze ASTM B505/C95400Yoke nut Ductile Iron A439 TY D2Back-seat bushing Bronze ASTM B505/C95400Gland Carbon steel ASTM A276-420Gland flange Carbon steel A216 Gr. WCBGland bolt Steel A193-B7Gland bolt nut Steel A194-2HBonnet stud bolt Steel A193-B7Bonnet stud bolt nut Steel A194-2HBonnet gasket 304SS Spiral Wound CommercialStem packing Graphite CommericalHandwheel Dustile Iron A395Handwheel nut Carbon steel ASTM A194-2H


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16”L Face to Face RF 8 8.5 9.5 10.5 11.5 14 16 19.5 24.5 27.5 31 34H Height (Open) 13.375 14.75 15.75 16.5 18.5 19.5 20.5 23.25 45.25 53.25 57.5 61.5H Height (Closed) 12.5 13.75 14.5 15 17 18 18.75 20.75 34.5 40.5 43.5 47.25W Handwheel Diam. 8 10 10 10 11.75 13.75 13.75 15.75 19.75 22 23.75 25.5Weight (lbs) 51 64 90 115 141 197 254 373 631 893 1000 1400

GLOBE VALVE150 LBBRONZE TRIM



Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBYoke Carbon steel A216 Gr. WCBDisc CR13 A276 TY 410Disc nut CR13 A276 TY 410Seat ring CR13 A105/HF OverlayStem CR13 A276 TY 410Yoke nut Ductile Iron A439 D2Back-seat bushing CR13 A276 TY 420Gland CR13 A276 TY 420Gland flange Carbon steel A216 Gr. WCBGland bolt Steel A193-B7Gland bolt nut Steel A194-2HBonnet stud bolt Steel A193-B7Bonnet stud bolt nut Steel A194-2HBonnet gasket 304SS Spiral wound CommercialStem packing Graphite CommercialHandwheel Ductile Iron A395Handwheel nut Carbon steel ASTM A194-2H



SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16”L Face to Face RF 8 8.5 9.5 10.5 11.5 14 16 19.5 24.5 27.5 31 34H Height (Open) 13.375 14.75 15.75 16.5 18.5 19.5 20.5 23.25 45.25 53.25 57.5 61.5H Height (Closed) 12.5 13.75 14.5 15 17 18 18.75 20.75 34.5 40.5 43.5 47.25W Handwheel Diam. 8 10 10 10 11.75 13.75 13.75 15.75 19.75 22 23.75 25.5Weight (lbs) 51 64 90 115 141 197 254 373 631 893 1000 1400

GLOBE VALVE150 LBCR13/HF TRIM



GLOBE VALVE300-600-900-1500 LBCR13/HF TRIM


SIZE 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” 14” 16”L Face to Face RF 10.5 11.5 12.5 14 15.75 17.5 22 24.5 28 33 34H Height (Open) 14 15.375 16.5 19.5 22.75 26.5 36 37.375 40.75 50 57.75H Height (Closed) 13 14.25 15.5 18 21 24.5 33.25 34.375 37.125 45.625 53W Handwheel Diam. 8 10 10 13.75 17.75 19.75 22 23.75 25.5 27.5 31.5Weight (lbs) 82 110 136 220 284 390 741 1015 1496 2240 3050


SIZE 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” 14”* 16”*L Face to Face RF 11.5 13 14 17 20 22 26 31 33 35 39H Height (Open) 15.75 19.75 19.5 23.5 27.5 31 40 46.5 51.25 57.75 60.75H Height (Closed) 14.75 18.75 18.5 22.25 25.75 29.25 37.25 43.5 47.75 57.75 60.75W Handwheel Diam. 10 12 14 18 20 22 23.75 27.5 31.5 32 39.5Weight (lbs) 80 110 172 264 412 625 847 1295 1685 2325 3120*Sizes are provided with gear operator, as seen on page 23. Dimension is valve height from center of waterway bore including operator.


SIZE 2” 3” 4” 6” 8” 10”L Face to Face RF 14.5 15 18 24 29 33H Height (Open) 19.75 21.5 27 38.75 47 63.25H Height (Closed) 18.75 20.5 25.5 36.75 44.5 60W Handwheel Diam. 14 18 19.75 23.75 27.5 31.5Weight (lbs) 190 255 480 1150 1820 3100


SIZE 2” 3” 4” 6”* 8”* 10”*L Face to Face RF 14.5 18.5 21.5 27.75 32.75 39.375H Height (Open) 19.75 25.25 31.125 50.25 63 75.25H Height (Closed) 18.75 24 29.75 50.25 63 75.25W Handwheel Diam. 14 19.75 22 24 24 39.375Weight (lbs) 210 410 670 1740 2080 3480*Sizes are provided with gear operator, as seen on page 23. Dimension is valve height from center of waterway bore including operator.




Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBYoke Carbon steel A216 Gr. WCBDisc Carbon steel ASTM A105/Bronze OverlayDisc facing Bronze ASTM B150/C62400Disc nut Bronze ASTM B505/C95400Seat ring Bronze ASTM B150/C62400Stem Bronze ASTM B505/C95400Yoke nut Ductile Iron A439 D2Back-seat bushing Bronze ASTM B505/C95400Gland Carbon steel ASTM A276-420Gland flange Carbon steel A216 Gr. WCBGland bolt Steel A193-B7Gland bolt nut Steel A194-2HBonnet stud bolt Steel A193-B7Bonnet stud bolt nut Steel A194-2HBonnet gasket 304SS Spiral Wound CommercialStem packing Graphite CommericalHandwheel Dustile Iron A395Handwheel nut Carbon steel ASTM A194-2H


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16”L Face to Face RF 4 4.25 4.75 5.25 5.75 7 8 9.75 12.25 13.75 15.5 18H Height (Open) 13.250 14.75 15.5 16.5 18.5 19.5 20.75 23.25 45.25 53.25 57.5 61.375W Handwheel Diam. 8 10 10 10 11.75 13.75 13.75 15.75 19.75 22 23.75 25.5Weight (lbs) 51 64 90 111 141 197 254 373 631 893 1100 1400

ANGLE VALVE150 LBBRONZE TRIM



Body Carbon steel A216 Gr. WCBBonnet Carbon steel A216 Gr. WCBYoke Carbon steel A216 Gr. WCBDisc CR13 A276 TY 410Disc nut CR13 A276 TY 410Seat ring CR13 A105/HF OverlayStem CR13 A276 TY 410Yoke nut Ductile Iron A439 D2Back-seat bushing CR13 A276 TY 420Gland CR13 A276 TY 420Gland flange Carbon steel A216 Gr. WCBGland bolt Steel A193-B7Gland bolt nut Steel A194-2HBonnet stud bolt Steel A193-B7Bonnet stud bolt nut Steel A194-2HBonnet gasket 304SS Spiral wound CommercialStem packing Graphite CommercialHandwheel Ductile Iron A395Handwheel nut Carbon steel ASTM A194-2H



SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16”L Face to Face RF 4 4.25 4.75 5.25 5.75 7 8 9.75 12.25 13.75 15.5 18H Height (Open) 13.25 14.75 15.5 16.5 18.5 19.5 20.75 23.25 45.25 53.25 57.5 61.375W Handwheel Diam. 8 10 10 10 11.75 13.75 13.75 15.75 19.75 22 23.75 25.5Weight (lbs) 51 64 90 111 141 197 254 373 631 893 1100 1400

ANGLE VALVE150 LBCR13/HF TRIM



ANGLE VALVE300-600-900-1500 LBCR13/HF TRIM


SIZE 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” 14” 16”L Face to Face RF 5.25 5.75 6.25 7 7.875 8.75 11 12.25 14 16.5 17H Height (Open) 17 19.5 20.5 25.5 27 31 32.5 35 44.5 53 62W Handwheel Diam. 8 10 10 14 14 20 20 24 27 30 30Weight (lbs) 82 110 136 220 284 390 741 1015 1682 2240 3100


SIZE 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” 14” 16”L Face to Face RF 5.75 6.5 7 8.5 10 11 13 15.5 16.5 17.5 19.5H Height (Open) 20 22 25.5 29.5 35 41 55 57 59 61.5 64W Handwheel Diam. 10 10 12 16 20 24 24 30 30 36 36Weight (lbs) 92 144 176 315 492 705 1310 1900 2450 3100 3900


SIZE 3” 4” 5” 6” 8” 10”L Face to Face RF 7.5 9 11 12 14.5 16.5H Height (Open) 30 31 35 48 55 64W Handwheel Diam. 16 20 20 24 30 30Weight (lbs) 255 480 785 1150 1820 3100


SIZE 2” 2-1/2” 3” 4” 5” 6” 8”L Face to Face RF 7.25 8.25 9.25 10.75 13.25 13.875 19.5H Height (Open) 27.5 28.5 30 38 45 53.5 64W Handwheel Diam. 14 16 20 24 28 30 36Weight (lbs) 210 315 410 670 1010 1240 2100



9, 10, 11

12, 13, 14



Body Carbon steel A216 Gr. WCBCap Carbon steel A216 Gr. WCBDisc Bronze ASTM B150/C62400Disc nut Bronze ASTM B505/C95400Seat ring Bronze ASTM B150/C62400Hinge Carbon steel A216 Gr. WCBHinge pin Bronze ASTM B505/C95400Side plug Carbon steel ASTM A194-2HCap stud bolt Carbon steel A193-B7Cap stud bolt nut Carbon steel A194-2HGasket Reinforced Graphite Commercial


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 8 8.5 9.500 10.500 11.5 13 14.000 19.5 24.5 27.5 31 34 38.5 38.5 51H Height 6.000 6.5 7.5 8.5 9 9.5 10.500 13.000 14 15 17.5 19 23 24 29Weight (lbs) 41 53 72 92 98 138 174 305 460 620 860 990 1380 1710 2620

SWING CHECK VALVE150 LBBRONZE TRIM



Body Carbon steel A216 Gr. WCBCap Carbon steel A216 Gr. WCBDisc CR13 ASTM A217-CA15Disc nut CR13 A276 TY 420Seat ring CR13 ASTM A105/HF OverlayHinge Carbon steel A216 Gr. WCBHinge pin CR13 A276 TY 420Side plug CR13 A276 TY 420Cap stud bolt Carbon steel A193-B7Cap stud bolt nut Carbon steel A194-2HGasket Non Asbestos Commercial



SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 8 8.5 9.500 10.500 11.5 13 14.000 19.5 24.5 27.5 31 34 38.5 38.5 51H Height 6.000 6.5 7.5 8.5 9 9.5 10.500 13.000 14 15 17.5 19 23 24 29Weight (lbs) 41 53 72 92 98 138 174 305 460 620 860 990 1380 1710 2620

SWING CHECK VALVE150 LBCR13/HF TRIM



SWING CHECK VALVE300-600-900-1500 LBCR13/HF TRIM


SIZE 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 10.5 11.5 12.500 14 15.75 17.500 21 24.5 28 33 34 38.5 40 53H Height 7.000 7.25 8.5 10.25 12 12.500 15.000 17.125 20.125 33 34 38.5 40 53Weight (lbs) 35 55 70 115 140 200 390 470 635 900 1250 1555 1910 2715


SIZE 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”L Face to Face RF 11.5 13 14.000 17 20 22.000 26 31 33 35 39 43 47 55H Height 7.250 7.5 9.125 10.375 14 14.750 16.750 20.375 22.500 23.75 24.5 29.75 29.375 37.75Weight (lbs) 62 95 123 205 355 444 746 1146 1925 1947 2684 3564 4664 6510


SIZE 2” 2-1/2” 3” 4” 6” 8” 10” 12” 14” 16” 18”L Face to Face RF 14.5 16.5 15.000 18 24.000 29 33 38 40.5 44.5 48H Height 11.500 9.75 9.75 10.75 17.500 20.750 25.000 25.500 27.5 28.5 33.75Weight (lbs) 154 220 200 330 506 851 1390 1982 2506 3548 4355


SIZE 2” 2-1/2” 3” 4” 6” 8” 10” 12” 14” 16”L Face to Face RF 14.5 16.5 18.500 21.5 27.750 32.75 39 44.5 49.5 54.5H Height 11.500 13.25 13.25 16 20.500 24.125 30.000 32.000 34 38Weight (lbs) 154 220 330 539 1210 2222 3410 5016 6732 9900



16, 17, 18

12, 13, 14

16, 17, 18

BELLOW MATERIALS - SS316 or Inconel



Body Cast steel A216 Gr. WCBBonnet Cast steel A216 Gr. WCBYoke Cast steel A216 Gr. WCBWedge Cast steel A216 Gr. WCBWedge facing CR13 A276 TY 410Seat ring CR13 A105/HF OverlayStem CR13 A276 TY 410Yoke nut Ductile iron A439 TY D2Yoke nut Retainer Carbon steel A216 Gr. WCBGland CR13 A276 TY 410Gland flange Cast steel A216 Gr. WCBGland eyebolt Steel A193-B7Gland eyebolt nut Steel A194-2HBonnet stud bolt Steel A193-B7Bonnet stud bolt nut Steel A194-2HBonnet gasket Reinforced graphite CommercialStem packing Graphite CommercialBellows Stainless steel or Inconel Gr. 316 or InconelHandwheel Ductile iron A395Handwheel nut Steel A194-2H


SIZE 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8” 10” 12”L Face to Face RF 7 7.5 8 8.5 9 9.5 10.5 11.5 13 14H Height (Open) 23.250 27.75 30.125 36 39 47.25 53.750 66.375 77.25 88.5H Height (Closed) 21 24.75 26.75 31.5 34.375 41.75 47.25 57.75 66.5 75.75W Handwheel Diam. 8 8 10 10 10 12 12 14 15.75 18Weight (lbs) 52 75 95 115 128 215 260 385 560 805

BELLOW SEAL GATE150 LBCR13/HF TRIM

FIGURE 15011C-BS


PRODUCT WARRANTY

W & O Supply, Inc. (W&O) warranties all SPACE Valve Products for a period of 12 months from theinvoice date. Warranty provides for the repair or replacement of material, if deemed defective. Thiswarranty applies to only SPACE valves sold directly by W&O to original purchaser, this warranty doesnot apply to resellers of used or rebuilt SPACE Valves.

W&O warrants against defects and/or workmanship each product sold by them under the followingterms and conditions:

• The product is of SPACE Valve Product manufacture.

• Product was under normal use and service at all times. The product was not at any timemisused, operated beyond design capabilities or used for any purpose other than that for which itwas intended.

• There has been no modifications or changes in design or function after leaving W&O facility(ies).

• Warranty claim must be made within the one (1) year period from date of shipment from W&O toPurchaser.

• Claimant is original Purchaser and there has been no other owner(s).

• Purchaser assumes all risk in selection of the product. It is the responsibility of the Purchaser tohave received knowledgeable advice when selecting product type, material construction, etc.

• Purchaser is obligated to notify W&O promptly of any claimed defect, and shall be responsiblefor the return to W&O of all claimed defective product or parts. W&O shall have the right toinspect the product to determine obligation, prior to any settlement of provisions herein.

• Providing that the foregoing Warranty conditions have been met, W&O’s obligation shall belimited to either the repair of the product, f.o.b. W&O, Jacksonville, Florida or the replacement ofany part(s) with proven defective workmanship or materials.

• W&O shall not be held responsible for any consequential loss or incidental damages, personalinjury, damages for loss of use, lost profit, work, production or any other damages in connectionwith this Warranty.

• If the valve has failed due to conditions other than those identified in this warranty agreement,the cost to re-supply the new valve will then be billed to the account of original purchaser.


K C Y M K C Y M

space valve catalog ecr

Documents

space valves

spacecast steel valves

wcbwedge carbon steel

wcbbonnet carbon steel

body carbon steel a216

gate valves

angle valves

globe valves