solvent weld sewer fittings sdr 35 p injection … weld sewer fittings sdr 35 injection molded in...

11
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly Plastic Trends) 56400 Mound Road Shelby Twp., MI 48316 Toll Free: 800.232.5690 Fax: 586.781.0888 www.royalbuildingproducts.com Short Specs 3” through 12” injection molded solvent weld SDR 35 sewer fittings shall be manufactured in accordance with ASTM D3034 and CSA B182.2. They shall be molded from virgin PVC compound having a minimum cell classification of 12454 or 13343 in accordance with, and certified by the National Sanitation Foundation (NSF), to meet ASTM D1784. Injection molded solvent weld SDR 35 Sewer fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D3034, and, in applicable configurations by the International Association of Plumbing and Municipal Officials (IAPMO) to meet the requirements of the Uniform Plumbing Code (UPC) as applicable, and by the Canadian Standards Association (CSA) to meet CSA B182.2. ATTENTION: Royal Building Products fittings are not to be used with compressed air or gases. Royal does not recommend that piping systems that include its products be tested with compressed air or gases. Applications Royal Building Products has the broadest product offering of Solvent Weld Sewer fittings in the industry. They conform to all municipal, federal, and military requirements. They are tested for joint tightness, internal stress and dimensional stability. The P Series is engineered for the harsh environment of construction, shipping, handling and installation. Listed below are some of the uses of Solvent Weld Sewer fittings: • Onsite Disposal - Closed loop septic fields - Open system septic fields - Engineered systems • Laterals to Municipal Sewers (sanitary & storm) Certifications Royal Plastic Trends Solvent Weld Sewer fittings are third party tested and listed by NSF, UPC, and CSA to meet specifications defined in ASTM D3034 and CSA B182.2. • Surface Drainage - Foundation Drains - Radon Gas Venting - Yard Drainage ° Downspouts ° Pool Drainage ° Area Drainage ° Landscape Drainage Third Party Tested P

Upload: lamdien

Post on 21-May-2018

221 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

Solvent Weld Sewer Fittings SDR 35Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36”

Royal Building Products (formerly Plastic Trends) 56400 Mound Road Shelby Twp., MI 48316Toll Free: 800.232.5690Fax: 586.781.0888 www.royalbuildingproducts.com

Short Specs3” through 12” injection molded solvent weld SDR 35 sewer fittings shall be manufactured in accordance with ASTM D3034 and CSA B182.2. They shall be molded from virgin PVC compound having a minimum cell classification of 12454 or 13343 in accordance with, and certified by the National Sanitation Foundation (NSF), to meet ASTM D1784. Injection molded solvent weld SDR 35 Sewer fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D3034, and, in applicable configurations by the International Association of Plumbing and Municipal Officials (IAPMO) to meet the requirements of the Uniform Plumbing Code (UPC) as applicable, and by the Canadian Standards Association (CSA) to meet CSA B182.2.

ATTENTION: Royal Building Products fittings are not to be used with compressed air or gases. Royal does not recommend that piping systems that include its products be tested with compressed air or gases.

ApplicationsRoyal Building Products has the broadest product offering of Solvent Weld Sewer fittings in the industry. They conform to all municipal, federal, and military requirements. They are tested for joint tightness, internal stress and dimensional stability. The P Series is engineered for the harsh environment of construction, shipping, handling and installation.

Listed below are some of the uses of Solvent Weld Sewer fittings:

• Onsite Disposal - Closed loop septic fields - Open system septic fields - Engineered systems• Laterals to Municipal Sewers (sanitary & storm)

CertificationsRoyal Plastic Trends Solvent Weld Sewer fittings are third party tested and listed by NSF, UPC, and CSA to meet specifications defined in ASTM D3034 and CSA B182.2.

• Surface Drainage - Foundation Drains - Radon Gas Venting - Yard Drainage ° Downspouts ° Pool Drainage ° Area Drainage ° Landscape Drainage

Third Party Tested

P

Page 2: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

Page P2

1-800-232-5690

*3 x 3*4 x 4*6 x 4*6 x 6*8 x 4*8 x 6*8 x 8*10 x 4*10 x 6*10 x 8*10 x 10*12 x 4*12 x 6*12 x 8*12 x 10*12 x 1215 x 415 x 615 x 815 x 1015 x 1215 x 1518 x 418 x 618 x 818 x 1018 x 1218 x 1518 x 1821 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1821 x 2124 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2124 x 2427 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2427 x 2730 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2730 x 3036 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

*3 x 3*4 x 4*6 x 4*6 x 6*8 x 4*8 x 6*8 x 810 x 410 x 610 x 810 x 1012 x 412 x 612 x 812 x 1012 x 1215 x 415 x 615 x 815 x 1015 x 1215 x 1518 x 418 x 618 x 818 x 1018 x 1218 x 1518 x 1821 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1821 x 2124 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2124 x 2427 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2427 x 2730 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2730 x 3036 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

P102P104P116P106

P108-4P108-6P108

P1010-4P1010-6P1010-8P1010

P1012-4P1012-6P1012-8P1012-10

P1012P1015-4P1015-6P1015-8P1015-10P1015-12

P1015P1018-4P1018-6P1018-8P1018-10P1018-12P1018-15

P1018P1021-4P1021-6P1021-8P1021-10P1021-12P1021-15P1021-18

P1021P1024-4P1024-6P1024-8P1024-10P1024-12P1024-15P1024-18P1024-21

P1024P1027-4P1027-6P1027-8P1027-10P1027-12P1027-15P1027-18P1027-21P1027-24

P1027P1030-4P1030-6P1030-8P1030-10P1030-12P1030-15P1030-18P1030-21P1030-24P1030-27

P1030P1036-4P1036-6P1036-8P1036-10P1036-12P1036-15P1036-18P1036-21P1036-24P1036-27P1036-30

P302P304P316P306

P308-4P308-6P308

P3010-4P3010-6P3010-8P3010

P3012-4P3012-6P3012-8P3012-10

P3012P3015-4P3015-6P3015-8P3015-10P3015-12

P3015P3018-4P3018-6P3018-8P3018-10P3018-12P3018-15

P3018P3021-4P3021-6P3021-8P3021-10P3021-12P3021-15P3021-18

P3021P3024-4P3024-6P3024-8P3024-10P3024-12P3024-15P3024-18P3024-21

P3024P3027-4P3027-6P3027-8P3027-10P3027-12P3027-15P3027-18P3027-21P3027-24

P3027P3030-4P3030-6P3030-8P3030-10P3030-12P3030-15P3030-18P3030-21P3030-24P3030-27

P3030P3036-4P3036-6P3036-8P3036-10P3036-12P3036-15P3036-18P3036-21P3036-24P3036-27P3036-30

7.82 11.90 44.08 46.65 98.57

121.96 183.84 331.48 381.54 477.85 576.70 462.97 499.52 595.16 638.83 864.98 681.21 786.69 855.72 908.16

1,102.62 1,338.29 1,738.32 1,799.38 1,882.37 1,957.15 2,012.20 2,147.26 2,270.65 2,469.78 2,653.70 2,854.97 3,071.82 3,296.93 3,687.09 4,191.81 5,170.59 3,784.76 4,667.58 4,796.67 4,845.11 4,951.64 4,989.51 6,883.41 8,078.77 9,618.19 4,805.32 4,834.12 5,518.42 5,804.08 6,346.66 7,164.71 7,341.70 9,200.83 9,355.67

12,896.32 6,175.11 6,212.13 7,091.35 7,458.46 8,155.74 9,206.93 9,434.44 9,716.92

12,022.57 12,362.45 15,453.12

8,212.88 8,262.13 9,431.49 9,919.74

10,847.15 12,245.23 12,547.77 12,923.52 15,990.02 16,442.07 21,867.95

12.60 15.75 55.48 63.67

119.63 142.37 212.75 355.55 400.62 550.86 629.64 487.42 550.73 705.57 854.74

1,009.64 730.97 847.33

1,039.46 1,209.88 1,358.87 1,792.07 1,825.24 1,889.35 1,976.49 2,055.01 2,112.81 2,254.62 2,648.19 2,625.94 2,819.27 3,187.12 3,600.40 3,898.57 4,524.42 5,338.77 7,004.56 3,973.99 4,900.96 5,036.50 5,087.37 5,199.22 5,238.99 7,227.58 8,482.71

10,099.10 5,045.59 5,075.82 5,917.70 6,094.29 6,664.00 7,522.95 7,938.90 9,660.88

10,952.20 13,541.13 6,483.86 6,522.73 7,604.48 7,831.38 8,563.53 9,667.28 9,906.16

10,846.11 12,623.70 13,165.96 16,457.55 8,623.53 8,675.24 9,903.07

10,415.73 11,389.50 12,857.49 13,175.17 13,569.70 16,789.52 17,280.46 22,961.35

-------

1218101088876--------------------------------------------------------------

----

32-------------------------------------------------------------------------

30204642311111111111111111111111111111111111111111111111111111111111111111111111

25166443211111111111111111111111111111111111111111111111111111111111111111111111

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

Straight Tee HxHxH 45 Degree Wye HxHxH

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 3: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

PSolvent Weld Sewer Fittings SDR 35

Page P3

www.royalbuildingproducts.com

4 x 46 x 46 x 68 x 48 x 68 x 810 x 410 x 610 x 810 x 1012 x 412 x 612 x 812 x 1012 x 1215 x 415 x 615 x 815 x 1015 x 1215 x 1518 x 418 x 618 x 818 x 1018 x 1218 x 1518 x 1821 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1821 x 2124 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2124 x 2427 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2427 x 2730 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2730 x 3036 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

*4 x 46 x 46 x 68 x 48 x 68 x 810 x 410 x 610 x 810 x 1012 x 412 x 612 x 812 x 1012 x 1215 x 415 x 615 x 815 x 1015 x 1215 x 1518 x 418 x 618 x 818 x 1018 x 1218 x 1518 x 1821 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1821 x 2124 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2124 x 2427 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2427 x 2730 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2730 x 3036 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

P124P126-4P126

P128-4P128-6P128

P12710-4P12710-6P12710-8P12710

P12712-4P12712-6P12712-8P12712-10

P12712P12715-4P12715-6P12715-8P12715-10P12715-12

P12715P12718-4P12718-6P12718-8P12718-10P12718-12P12718-15

P12718P12721-4P12721-6P12721-8P12721-10P12721-12P12721-15P12721-18

P12721P12724-4P12724-6P12724-8P12724-10P12724-12P12724-15P12724-18P12724-21

P12724P12727-4P12727-6P12727-8P12727-10P12727-12P12727-15P12727-18P12727-21P12727-24

P12727P12730-4P12730-6P12730-8P12730-10P12730-12P12730-15P12730-18P12730-21P12730-24P12730-27

P12730P12736-4P12736-6P12736-8P12736-10P12736-12P12736-15P12736-18P12736-21P12736-24P12736-27P12736-30

P324P326-4P326

P328-4P328-6P328

P3210-4P3210-6P3210-8P3210

P3212-4P3212-6P3212-8P3212-10

P3212P3215-4P3215-6P3215-8P3215-10P3215-12

P3215P3218-4P3218-6P3218-8P3218-10P3218-12P3218-15

P3218P3221-4P3221-6P3221-8P3221-10P3221-12P3221-15P3221-18

P3221P3224-4P3224-6P3224-8P3224-10P3224-12P3224-15P3224-18P3224-21

P3224P3227-4P3227-6P3227-8P3227-10P3227-12P3227-15P3227-18P3227-21P3227-24

P3227P3230-4P3230-6P3230-8P3230-10P3230-12P3230-15P3230-18P3230-21P3230-24P3230-27

P3230P3236-4P3236-6P3236-8P3236-10P3236-12P3236-15P3236-18P3236-21P3236-24P3236-27P3236-30

21.75 52.94 72.65

137.82 140.25 248.61 381.21 438.78 549.53 663.21 532.41 574.45 684.43 734.66 994.73 783.38 904.70 984.09

1,044.39 1,268.01 1,539.03 1,999.06 2,069.29 2,164.72 2,250.72 2,314.03 2,469.36 2,611.25 2,840.25 3,051.76 3,283.23 3,532.60 3,791.46 4,240.16 4,820.58 5,946.18 4,352.47 5,367.71 5,516.17 5,571.88 5,694.38 5,737.94 7,915.93 9,290.59

11,060.91 5,526.12 5,559.23 6,346.19 6,674.70 7,298.67 8,239.41 8,442.96

10,580.95 10,759.01 14,830.77 7,101.38 7,143.95 8,155.05 8,577.23 9,379.10

10,587.96 10,849.60 11,174.46 13,825.96 14,216.82 17,771.09 9,444.82 9,501.45

10,846.21 11,407.70 12,474.22 14,082.01 14,429.94 14,862.06 18,388.52 18,908.39 25,148.14

21.05 63.80 95.15

137.58 163.73 244.66 408.89 460.72 633.49 724.10 560.53 633.33 811.41 982.96

1,161.08 840.62 974.43

1,195.38 1,391.36 1,562.71 2,060.88 2,099.02 2,172.75 2,272.97 2,363.25 2,429.74 2,592.81 3,045.41 3,019.84 3,242.16 3,665.19 4,140.46 4,483.35 5,203.09 6,139.59 8,055.24 4,570.10 5,636.10 5,791.98 5,850.48 5,979.10 6,024.83 8,311.71 9,755.12

11,613.97 5,802.43 5,837.20 6,805.35 7,008.43 7,663.60 8,651.39 9,129.73

11,110.01 12,595.04 15,572.31 7,456.44 7,501.14 8,745.15 9,006.09 9,848.06

11,117.37 11,392.08 12,473.03 14,517.25 15,140.85 18,926.18 9,917.06 9,976.53

11,388.52 11,978.09 13,097.93 14,786.12 15,151.45 15,605.16 19,307.94 19,872.53 26,405.55

-----------------------------------------------------------------------------

-----------------------------------------------------------------------------

11111111111111111111111111111111111111111111111111111111111111111111111111111

161111111111111111111111111111111111111111111111111111111111111111111111111111

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

Straight Tee SxHxH 45 Degree Wye SxHxH

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 4: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

Page P4

1-800-232-5690

*3 x 3*4 x 4*6 x 4*6 x 6*8 x 4*8 x 6*8 x 810 x 410 x 610 x 812 x 412 x 612 x 815 x 415 x 615 x 818 x 418 x 618 x 821 x 421 x 621 x 824 x 424 x 624 x 827 x 427 x 627 x 830 x 430 x 630 x 836 x 436 x 636 x 8

†3 x 3†4 x 4†6 x 4†6 x 6†8 x 4†8 x 6†8 x 810 x 410 x 610 x 812 x 412 x 612 x 815 x 415 x 615 x 818 x 418 x 618 x 821 x 421 x 621 x 824 x 424 x 624 x 827 x 427 x 627 x 830 x 430 x 630 x 836 x 436 x 636 x 8

4 x 46 x 46 x 68 x 48 x 68 x 810 x 410 x 610 x 812 x 412 x 612 x 815 x 415 x 615 x 818 x 418 x 618 x 821 x 421 x 621 x 824 x 424 x 624 x 827 x 427 x 627 x 830 x 430 x 630 x 836 x 436 x 636 x 8

*4 x 46 x 46 x 68 x 48 x 68 x 810 x 410 x 610 x 810 x 1012 x 412 x 612 x 812 x 1012 x 1215 x 415 x 615 x 815 x 1015 x 1215 x 1518 x 418 x 618 x 818 x 1018 x 1218 x 1518 x 1821 x 421 x 624 x 424 x 627 x 427 x 6

*4 x 4†6 x 6

*4 x 4*6 x 6

P155P156

P157-4P157

P158-4P158-6P158

P1510-4P1510-6P1510-8P1512-4P1512-6P1512-8P1515-4P1515-6P1515-8P1518-4P1518-6P1518-8P1521-4P1521-6P1521-8P1524-4P1524-6P1524-8P1527-4P1527-6P1527-8P1530-4P1530-6P1530-8P1536-4P1536-6P1536-8

P1653P1654

P1656-4P1656

P1658-4P1658-6P1658

P16510-4P16510-6P16510-8P16512-4P16512-6P16512-8P16515-4P16515-6P16515-8P16518-4P16518-6P16518-8P16521-4P16521-6P16521-8P16524-4P16524-6P16524-8P16527-4P16527-6P16527-8P16530-4P16530-6P16530-8P16536-4P16536-6P16536-8

P174P177-4P177

P178-4P178-6P178

P1710-4P1710-6P1710-8P1712-4P1712-6P1712-8P1715-4P1715-6P1715-8P1718-4P1718-6P1718-8P1721-4P1721-6P1721-8P1724-4P1724-6P1724-8P1727-4P1727-6P1727-8P1730-4P1730-6P1730-8P1736-4P1736-6P1736-8

P179P1796-4P1796

P1798-4P1798-6P1798

P17910-4P17910-6P17910-8P17910

P17912-4P17912-6P17912-8P17912-10

P17912P17915-4P17915-6P17915-8P17915-10P17915-12

P17915P17918-4P17918-6P17918-8P17918-10P17918-12P17918-15

P17918P17921-4P17921-6P17924-4P17924-6P17927-4P17927-6

P1104P1106

P1004P1006

16.94 17.36 90.15

119.13 125.61 149.48 280.98 422.26 488.54 758.11 511.79 578.67 935.72 767.53 889.70

1,091.43 1,916.50 1,983.82 2,075.32 2,757.24 2,960.23 3,346.48 4,337.20 5,146.01 5,288.33 5,297.87 5,329.61 6,213.58 6,808.06 6,848.87 7,984.70 9,054.71 9,109.01

10,398.22

33.0236.0576.52

114.99140.67193.69330.84376.60451.95668.95508.46602.05823.65752.01898.65

1,157.541,846.281,940.682,094.582,647.002,870.593,305.213,995.034,952.295,154.595,066.635,127.155,888.256,504.906,574.057,535.798,644.578,726.61

10,021.15

21.70 103.68 137.00 144.46 171.90 323.13 485.60 561.82 871.83 588.57 665.47

1,076.08 882.65

1,023.15 1,255.15 2,203.97 2,281.39 2,386.62 3,170.83 3,404.26 3,848.45 4,987.78 5,917.91 6,081.58 6,092.55 6,129.05 7,145.61 7,829.27 7,876.20 9,182.41

10,412.92 10,475.36 11,957.95

31.83113.18136.91206.76218.08265.85430.94515.09668.99836.22601.86674.36833.23953.47

1,297.481,041.761,202.301,258.611,316.841,653.932,074.352,259.822,429.172,635.322,939.383,106.783,591.334,809.093,210.713,582.494,920.196,301.246,101.636,374.29

28.78 190.64

31.05191.64

----

30-----------------------------

--

28181613101198876---------------------

---------------------------------

----------------------------------

--

--

301854422111111111111111111111111111

1611111111111111111111111111111111

113111111111111111111111111111111

12111111111111111111111111111111111

151

103

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

Sanitary Tee (T-Y) HxHxH Combo Wye & 1/8 Bend HxHxH (2 Piece)

Sanitary Tee (T-Y) SxHxH Tee Cross HxHxHxH

Cleanout Tee HxHxFIPT 2-Way Cleanout HxHxH

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 5: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

PSolvent Weld Sewer Fittings SDR 35

Page P5

www.royalbuildingproducts.com

6 x 46 x 68 x 48 x 68 x 810 x 410 x 610 x 810 x 1012 x 412 x 612 x 812 x 1012 x 1215 x 415 x 615 x 815 x 1015 x 1215 x 1518 x 418 x 618 x 818 x 1018 x 1218 x 1518 x 1821 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1821 x 2124 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2124 x 2427 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2427 x 2730 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2730 x 3036 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 3036 x 36

*6 x 4*6 x 68 x 48 x 68 x 810 x 410 x 610 x 810 x 1012 x 412 x 612 x 812 x 1012 x 1215 x 415 x 615 x 815 x 1015 x 1215 x 1518 x 418 x 618 x 818 x 1018 x 1218 x 1518 x 1821 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1821 x 2124 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2124 x 2427 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2427 x 2730 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2730 x 3036 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 3036 x 36

P1536-4P1536

P1538-4P1538-6P1538

P15310-4P15310-6P15310-8P15310

P15312-4P15312-6P15312-8P15312-10

P15312P15315-4P15315-6P15315-8P15315-10P15315-12

P15315P15318-4P15318-6P15318-8P15318-10P15318-12P15318-15

P15318P15321-4P15321-6P15321-8P15321-10P15321-12P15321-15P15321-18

P15321P15324-4P15324-6P15324-8P15324-10P15324-12P15324-15P15324-18P15324-21

P15324P15327-4P15327-6P15327-8P15327-10P15327-12P15327-15P15327-18P15327-21P15327-24

P15327P15330-4P15330-6P15330-8P15330-10P15330-12P15330-15P15330-18P15330-21P15330-24P15330-27

P15330P15336-4P15336-6P15336-8P15336-10P15336-12P15336-15P15336-18P15336-21P15336-24P15336-27P15336-30

P15336

P366-4P366-6P368-4P368-6P368-8P3610-4P3610-6P3610-8P3610-10P3612-4P3612-6P3612-8P3612-10P3612-12P3615-4P3615-6P3615-8P3615-10P3615-12P3615-15P3618-4P3618-6P3618-8P3618-10P3618-12P3618-15P3618-18P3621-4P3621-6P3621-8P3621-10P3621-12P3621-15P3621-18P3621-21P3624-4P3624-6P3624-8P3624-10P3624-12P3624-15P3624-18P3624-21P3624-24P3627-4P3627-6P3627-8P3627-10P3627-12P3627-15P3627-18P3627-21P3627-24P3627-27P3630-4P3630-6P3630-8P3630-10P3630-12P3630-15P3630-18P3630-21P3630-24P3630-27P3630-30P3636-4P3636-6P3636-8P3636-10P3636-12P3636-15P3636-18P3636-21P3636-24P3636-27P3636-30P3636-36

142.82274.05296.64342.90648.40567.41659.53

1,061.361,335.75

717.64781.21

1,310.021,480.251,800.851,061.191,209.741,528.001,622.321,879.582,509.262,491.462,678.162,905.453,778.053,876.764,137.044,361.383,584.413,996.324,685.065,200.295,751.796,639.587,071.208,280.735,638.376,947.117,403.677,453.447,852.308,434.22

10,861.9413,433.9717,004.966,887.247,194.978,699.02

11,289.3212,330.3213,927.6814,277.6814,699.4718,190.3824,998.788,850.479,245.98

11,178.5814,111.6415,412.8817,409.6017,847.1018,374.3322,737.9728,422.4835,528.1011,771.1212,297.1614,557.5117,639.5620,610.2621,762.0222,308.8722,967.9428,422.4835,528.1044,410.1155,512.65

87.43144.30217.31265.70322.91471.55540.85771.20912.99633.65743.48987.79

1,239.381,514.461,133.011,309.461,455.241,754.322,038.302,777.702,372.802,550.632,767.082,979.763,169.233,494.674,237.103,413.733,806.014,461.975,220.585,847.867,012.858,542.04

11,557.515,166.196,616.307,051.117,375.647,798.848,120.44

11,564.1313,996.4817,168.476,559.276,852.368,284.778,836.729,996.00

11,660.5812,702.2415,940.4518,618.7523,696.988,429.028,805.68

10,646.2711,355.5012,845.3014,984.2815,849.8717,896.0821,460.2923,040.4429,623.5911,210.5911,711.5813,864.3015,102.8217,084.2519,929.1121,080.2722,390.0028,542.1830,240.7941,330.4347,572.65

-----------------------------------------------------------------------------

-----------------------------------------------------------------------------

11111111111111111111111111111111111111111111111111111111111111111111111111111

32111111111111111111111111111111111111111111111111111111111111111111111111111

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

Double Sanitary Tee (T-Y) HxHxHxH Double 45 Degree Wye HxHxHxH

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 6: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

Page P6

1-800-232-5690

*3*4*6*8*10*12

*3*4*6*8*10*12

*3*4*6*8

†10†1215182124273036

*3*4*6*8

†10†1215182124273036

*3*4*6*8*10*1215182124273036

*3*4*6*8*10*1215182124273036

468

468

468101215182124273036

468101215182124273036

*3*4*6*8*10*1215182124273036

*3*4*6*8*10*1215182124273036

468

468

P202P204P206P208P2010P2012

P222P224P226P228P2210P2212

P255P256P257P258P2510P2512P2515P2518P2521P2524P2527P2530P2536

P272P274P277P278P2710P2712P2715P2718P2721P2724P2727P2730P2736

P502P504P506P508P5010P5012P5015P5018P5021P5024P5027P5030P5036

P402P404P406P408P4010P4012P4015P4018P4021P4024P4027P4030P4036

P4804P4806P4808

P4904P4906P4908

P1354.30P1356.30P1358.30P13510.30P13512.30P13515.30P13518.30P13521.30P13524.30P13527.30P13530.30P13536.30

P1344.30P1346.30P1348.30P13410.30P13412.30P13415.30P13418.30P13421.30P13424.30P13427.30P13430.30P13436.30

P1703P1704P1706P1708P17010P17012P17015P17018P17021P17024P17027P17030P17036

P1713P1714P1716P1718P17110P17112P17115P17118P17121P17124P17127P17130P17136

P14904P14906P14908

P14904SP14906SP14908S

7.159.56

35.15124.71437.10644.47

11.4813.0561.43

153.48485.37987.52

8.5012.0554.37

230.45628.65904.13

1,325.821,880.372,894.334,008.445,248.636,340.878,116.69

12.6013.25

102.63273.59628.65889.51

1,152.142,012.622,894.334,008.445,248.637,926.48

10,145.89

5.988.23

32.3488.30

310.06481.52

1,076.131,246.802,304.363,283.814,104.155,515.786,894.73

10.5011.1241.41

108.17298.75434.84846.48

1,246.802,304.363,283.814,104.765,515.786,894.73

178.74268.10828.12

178.74268.10828.12

58.4974.42

103.16320.10465.76

1,024.141,259.272,327.403,316.644,145.195,570.946,963.68

59.9676.28

108.62320.10465.76

1,024.141,259.272,327.403,316.644,145.195,570.946,963.68

8.489.02

39.52102.14316.92461.14

1,014.001,246.802,304.363,283.814,104.155,515.786,894.73

9.6511.1246.10

108.62305.21681.62970.28

1,246.802,304.363,283.814,104.155,515.786,894.73

178.74268.10828.12

178.74268.10828.12

----97

------

----86-------

----86-------

----

129-------

----

129-------

---

---

------------

------------

----

209-------

-------------

---

---

25248411

25248411

202062111111111

202062111111111

6030124111111111

3030124111111111

111

111

111111111111

111111111111

1345104111111111

1322124111111111

111

111

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

1/4 Bend (90) HxH 1/4 Bend (90) SxH

1/4 Bend (90) HxH Long Sweep 1/4 Bend (90) SxH Long Sweep

1/8 Bend (45) HxH 1/8 Bend (45) SxH

1/8 Bend (45) HxH (Extra Long Sweep Radius) 1/8 Bend (45) SxH (Extra Long Sweep Radius)

1/12 Bend (30) HxH 1/12 Bend (30) SxH

1/16 Bend (22.5) HxH 1/16 Bend (22.5) SxH

1/16 Bend (22.5) HxH (Extra Long Sweep Radius) 1/16 Bend (22.5) SxH (Extra Long Sweep Radius)

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 7: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

PSolvent Weld Sewer Fittings SDR 35

Page P7

www.royalbuildingproducts.com

468101215182124273036

468101215182124273036

*3*4*6*8*10*1215182124273036

*3*4*6*8*10*1215182124273036

*4*6*8*10*1215182124273036

*3*4*6*8

6 x 48 x 48 x 610 x 410 x 610 x 812 x 412 x 612 x 812 x 1015 x 415 x 615 x 815 x 1015 x 1218 x 418 x 618 x 818 x 1018 x 1218 x 1521 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1824 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 21

†6 x 48 x 48 x 610 x 410 x 610 x 812 x 412 x 612 x 812 x 1015 x 415 x 615 x 815 x 1015 x 1218 x 418 x 618 x 818 x 1018 x 1218 x 1521 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1824 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 21

P1934P1936P1938P19310P19312P19315P19318P19321P19324P19327P19330P19336

P1834P1836P1838P18310P18312P18315P18318P18321P18324P18327P18330P18336

P1603P1604P1606P1608P16010P16012P16015P16018P16021P16024P16027P16030P16036

P602P604P606P608P6010P6012P6015P6018P6021P6024P6027P6030P6036

G1164G1166G1168G11610G11612L11615L11618L11621L11624L11627L11630L11636

P912P911P916P918

P616-4P618-4P618-6P6110-4P6110-6P6110-8P6112-4P6112-6P6112-8P6112-10P6115-4P6115-6P6115-8P6115-10P6115-12P6118-4P6118-6P6118-8P6118-10P6118-12P6118-15P6121-4P6121-6P6121-8P6121-10P6121-12P6121-15P6121-18P6124-4P6124-6P6124-8P6124-10P6124-12P6124-15P6124-18P6124-21

P1306-4P1308-4P1308-6P13010-4P13010-6P13010-8P13012-4P13012-6P13012-8P13012-10P13015-4P13015-6P13015-8P13015-10P13015-12P13018-4P13018-6P13018-8P13018-10P13018-12P13018-15P13021-4P13021-6P13021-8P13021-10P13021-12P13021-15P13021-18P13024-4P13024-6P13024-8P13024-10P13024-12P13024-15P13024-18P13024-21

59.0875.16

104.19323.30470.41

1,034.381,271.862,350.683,349.814,186.645,626.647,033.32

60.5677.04

111.33323.30470.41

1,034.381,271.862,350.683,349.814,186.645,626.647,033.32

3.614.76

17.4057.01

187.83237.84410.24723.94

1,588.631,813.172,266.533,045.653,807.05

4.765.44

19.8561.88

175.24298.40522.59

1,086.711,896.232,726.943,664.324,580.375,725.47

10.9816.8459.72

198.96237.79467.95658.88

1,303.261,959.712,396.174,284.275,482.75

8.208.95

36.13265.93

42.60108.78111.79224.22360.55441.16379.58399.90521.77681.93460.49578.30764.31842.09893.79721.01760.93791.40928.14963.08

1,064.03941.54957.86982.25

1,014.191,051.001,131.331,253.572,215.322,231.492,255.972,287.822,324.822,405.232,527.423,068.21

42.6085.2086.86

186.78269.68297.69315.28333.14361.39453.93432.84480.08644.44719.24762.87721.01760.93791.40821.17839.95845.28930.25953.21974.31

1,014.191,051.111,120.961,262.922,185.792,211.722,239.472,291.832,321.652,387.892,492.572,930.75

------------

------------

-------------

-------------

------------

----

------------------------------------

------------------------------------

111111111111

111111111111

10020246221111111

4036186211111111

24158221111111

5030153

111111111111111111111111111111111111

111111111111111111111111111111111111

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

1/32 Bend (11.25) HxH 1/32 Bend (11.25) SxH

Cap (H) Stop Coupling HxH

Spigot Plug (S) Drain Grate (S)

Eccentric Reducer Coupling HxH Eccentric Reducer Bushing SxH

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 8: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

Page P8

1-800-232-5690

*3 x 2*4 x 2*4 x 3*6 x 4*8 x 4*8 x 6*10 x 4*10 x 6*10 x 8*12 x 4*12 x 6*12 x 8*12 x 1015 x 415 x 615 x 815 x 1015 x 1218 x 418 x 618 x 818 x 1018 x 1218 x 1521 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1824 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2127 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2430 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2736 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

*3 x 2*4 x 2*4 x 3*6 x 4*8 x 4*8 x 6*10 x 4*10 x 6*10 x 8*12 x 4*12 x 6*12 x 8*12 x 1015 x 415 x 615 x 815 x 1015 x 1218 x 418 x 618 x 818 x 1018 x 1218 x 1521 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1824 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2127 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2430 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2736 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

*4 *4

P653P656P654P661

P608-4P608-6P6010-4P6010-6P6010-8P6012-4P6012-6P6012-8P6012-10P6015-4P6015-6P6015-8P6015-10P6015-12P6018-4P6018-6P6018-8P6018-10P6018-12P6018-15P6021-4P6021-6P6021-8P6021-10P6021-12P6021-15P6021-18P6024-4P6024-6P6024-8P6024-10P6024-12P6024-15P6024-18P6024-21P6027-4P6027-6P6027-8P6027-10P6027-12P6027-15P6027-18P6027-21P6027-24P6030-4P6030-6P6030-8P6030-10P6030-12P6030-15P6030-18P6030-21P6030-24P6030-27P6036-4P6036-6P6036-8P6036-10P6036-12P6036-15P6036-18P6036-21P6036-24P6036-27P6036-30

P1206P1212P1210P1216P1219P1220

P1210-4P1210-6P1210-8P1212-4P1212-6P1212-8P1212-10P1215-4P1215-6P1215-8P1215-10P1215-12P1218-4P1218-6P1218-8P1218-10P1218-12P1218-15P1221-4P1221-6P1221-8P1221-10P1221-12P1221-15P1221-18P1224-4P1224-6P1224-8P1224-10P1224-12P1224-15P1224-18P1224-21P1227-4P1227-6P1227-8P1227-10P1227-12P1227-15P1227-18P1227-21P1227-24P1230-4P1230-6P1230-8P1230-10P1230-12P1230-15P1230-18P1230-21P1230-24P1230-27P1236-4P1236-6P1236-8P1236-10P1236-12P1236-15P1236-18P1236-21P1236-24P1236-27P1236-30

P704 P754

28.2229.2810.2626.42

108.78111.79224.22360.54441.16379.65399.90521.77681.93460.49578.30764.31842.06893.79721.01760.93791.40928.13963.08

1,064.03941.54957.86982.25

1,014.191,051.001,131.331,253.572,215.322,231.492,255.972,287.822,324.822,405.232,527.423,068.212,342.122,352.702,377.922,405.022,528.342,542.032,646.753,567.924,294.902,997.943,011.483,854.724,934.026,315.538,083.90

10,347.3613,244.6416,953.1321,700.02

3,855.553,872.645,108.766,344.918,121.49

10,395.4813,306.2317,031.9721,800.9227,905.2035,718.65

31.8238.4833.6825.8585.2086.86

186.78269.68297.69315.28333.14361.39453.93432.84480.08644.44719.24762.87721.01760.93791.40821.17839.95865.11930.25953.21974.31

1,014.191,051.111,120.961,262.922,185.792,211.722,239.472,291.832,321.652,387.892,492.572,930.752,145.482,161.592,191.322,220.162,223.902,348.152,471.782,881.583,442.562,746.202,766.843,541.564,533.195,802.487,654.609,506.76

12,168.6715,575.9019,937.153,515.133,541.564,533.195,802.487,626.109,761.41

12,494.6116,410.3221,005.2026,886.6634,414.93

36.18 37.65

----

84-

36--------------------------------------------------------------

---------------------------------------------------------------------

- -

25205527810222222211111111111111111111111111111111111111111111111111111111

158

2515810222222211111111111111111111111111111111111111111111111111111111

36 15

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

Concentric Reducer Coupling HxH Concentric Reducer Bushing SxH

Cast Iron Pipe Adapter HxHC.I. Hub x Sewer Hub

Clay Pipe Adapter HxHClay Hub x Sewer Hub

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 9: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

PSolvent Weld Sewer Fittings SDR 35

Page P9

www.royalbuildingproducts.com

*4 x 3*4 x 4*6 x 4*6 x 6†8 x 810 x 810 x 1012 x 12

*3 x 1 1/2*3 x 2

*4 x 1 1/2*4 x 2*4 x 3*4 x 4*6 x 4*6 x 6

*3 x 3*4 x 4*6 x 68 x 8

10 x 1012 x 12

*4 x 4*6 x 4*6 x 6*8 x 8

10 x 1012 x 12

*4 x 4*6 x 4*6 x 6*8 x 8

*4 x 4*6 x 6*8 x 8

*4 x 4*6 x 4*6 x 6

*4 x 4*6 x 4*6 x 6

*4 x 4*6 x 4*6 x 6

*4 x 4*6 x 68 x 8

†4 x 4†6 x 68 x 8

10 x 1012 x 1215 x 15

4 x 46 x 68 x 8

*4 x 4 *4 x 46 x 68 x 8

*2 x 3 x 3*2 x 3 x 4*3 x 4 x 3*3 x 4 x 4

Note: Last dimension is pipe dimensionNote: Last dimension is pipe dimension

Note: Last dimension is pipe dimension

*2 x 3 x 4*3 x 4 x 4*4 x 6 x 6

*2 x 3 x 3*2 x 3 x 4*3 x 4 x 4*4 x 6 x 6

*3*4*6

P655P657P658P659

P6508P6510-8P6510P6512

P1202P1203P1204P1205P1211P1213P1214P1215

P1207P1208P1209

P12008P12010P12012

G944G946-4G946G948L9410L9412

G644G646-4G646 G648

G904G906G908

H657H658H659

H1213H1214H1215

H954H956-4H956

H1208H1209

H12008

P0104P0106P0108P0110P0112P0115

P0204P0206P0208

P674 G964G966G968

P1903P1904P1905P1906

P1944P1946P1948

P1923P1924P1926P1928

P1303P1304P1306

9.6013.8537.2347.49

145.00332.53353.49520.38

20.0118.0518.5818.8541.1726.3745.5160.20

11.4510.3644.63

205.35275.05425.95

26.4260.2075.96

165.48282.79416.31

27.9448.0261.23

141.53

31.2958.67

135.75

72.8897.77

106.99

67.5092.34

101.52

64.9583.2699.02

52.94101.32263.42

198.20517.94

1,775.992,277.352,557.014,529.59

224.96263.01525.77

37.07 41.7651.60

119.46

10.8211.1216.0017.63

10.1616.1163.06

7.848.44

15.0448.55

31.2632.34

151.86

--------

--------

------

------

----

---

---

---

---

---

------

---

- ---

----

---

----

---

451510121211

15158815201512

13620111

854411

6844

644

643

654

644

441

111111

111

24 811

40356560

32246

3622248

40303

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

In-Line Backwater Valve HxH Terminal Backwater Valve (H)

DWV Adapter Coupling HxH Solvent Sewer Hub x Solvent DWV Hub

DWV Adapter Bushing SxHSolvent Sewer Spigot x Solvent DWV Hub

DWV Adapter Sleeve SxHDWV Spigot x Solvent Sewer Hub

DWV Adapter Bushing SxHChamfer (Long) Sewer Spigot x Solvent DWV Hub

Gasketed Sewer Adapter HxG Solvent Sewer Hub x Gasket Sewer Hub

Gasketed Sewer Adapter SxGSolvent Sewer Spigot x Gasket Sewer Hub

Gasketed DWV Adapter Coupling GxDWV GSDR 26 Gasket Sewer Hub x Gasket DWV Hub

Gasketed DWV Adapter Bushing SxDWV GSDR 26 Chamfer Sewer Spigot x Gasket DWV Hub

Gasketed DWV Adapter Coupling HxDWV GSDR 26 Solvent Sewer Hub x Gasket DWV Hub

DWV Adapter Sleeve SxH Solvent DWV Spigot x SDR 26 Gasket Sewer Hub

Corrugated Pipe Adapter SxHCorrugated Spigot x Solvent Sewer Hub

Solvent Sewer Hub Adapter SxHChamfer Sewer Spigot x Solvent Sewer Hub

Downspout Adapter (H) Downspout x Solvent Sewer Hub

Corrugated Flushmount Downspout Adapter (S)Flushmount Downspout x Corrugated Spigot

Flushmount Downspout Adapter (H) Flushmount Downspout x Solvent Sewer Hub

Male AdapterSolvent Sewer Hub x Male Pipe Thread

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 10: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

Page P10

1-800-232-5690

*3*4*6*8*10*12

*4*6*8*10*12

*3 x 3*4 x 4*6 x 6*8 x 8

*10 x 10*12 x 12

*3 x 3*4 x 4*6 x 6*8 x 8

*10 x 10*12 x 12

†4 x 4†6 x 6†8 x 8

†10 x 10†12 x 12

†4 x 4†6 x 6†8 x 8

†10 x 10†12 x 12

†3 x 3†4 x 4†6 x 6†8 x 8

†10 x 10†12 x 12

†3 x 3†4 x 4†6 x 6†8 x 8

†10 x 12†12 x 12

*4*6

*4*6

4” Inlet6” Inlet

4” Inlet6” Inlet

6 x 48 x 48 x 610 x 410 x 612 x 412 x 615 x 415 x 618 x 418 x 621 x 421 x 624 x 424 x 627 x 427 x 630 x 430 x 636 x 436 x 6

6 x 48 x 48 x 610 x 410 x 612 x 412 x 615 x 415 x 618 x 418 x 621 x 421 x 624 x 424 x 627 x 427 x 630 x 430 x 636 x 436 x 6

68-10

6-810-12

Recommended 30 in/lb torque, not to exceed 50 in/lb Not to exceed 100 in/lb torque

P1153P1154P1156P1158P11510P11512

P1144P1146P1148P11410P11412

P1403P1404P1406P1408P14010P14012

P1503P1504P1506P1508P15010P15012

P8404P8406P8408P84010P84012

P8504P8506P8508P85010P85012

P9403P9404P9406P9408P94010P94012

P9503P9504P9506P9508P95010P95012

P1614-SNP1616-SN

P1624-SNP1626-SN

G5004G5006

G5054G5056

P2106-4DP2108-4DP2108-6DP2110-4DP2110-6DP2112-4DP2112-6DP2115-4DP2115-6DP2118-4DP2118-6DP2121-4DP2121-6DP2124-4DP2124-6DP2127-4DP2127-6DP2130-4DP2130-6DP2136-4DP2136-6D

P2306-4DP2308-4DP2308-6DP2310-4DP2310-6DP2312-4DP2312-6DP2315-4DP2315-6DP2318-4DP2318-6DP2321-4DP2321-6DP2324-4DP2324-6DP2327-4DP2327-6DP2330-4DP2330-6DP2336-4DP2336-6D

P5128 P5188

100-140-9100-230-9

6.356.56

33.01119.43194.37290.55

15.1739.03

147.46221.77313.80

12.4310.8251.09

170.05616.97895.11

11.128.48

52.94184.91575.68836.24

35.91100.03327.42858.58

1,228.75

33.57101.89342.29817.29

1,169.90

28.7027.3094.40

299.40831.18

1,205.50

27.3924.9695.87

314.27789.89

1,146.63

91.25114.07

76.0495.06

18.1223.74

20.2327.18

73.5397.87

217.82142.30170.01176.62198.60186.72200.23329.16362.62342.58371.69349.07482.94366.53485.64384.86404.18411.80513.51

78.37102.39117.42159.72175.38181.98206.53192.87206.71334.49370.01351.22382.89368.78402.05387.21422.16406.58443.26435.04474.29

22.1028.05

21.2229.27

------

-----

------

------

-----

-----

------

------

--

--

--

--

---------------------

---------------------

--

--

754035821

2040823

182015822

252020822

104422

104422

1126422

1124422

1410

2010

64

64

111111111111111111111

111111111111111111111

11

11

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

Threaded Plug - Raised Threaded Plug - Countersunk

Female Adapter (Hub x FIPT) Fitting Cleanout (Spigot x FIPT)

Female Adapter with Countersunk Plug (Hub x FIPT) Fitting Cleanout with Countersunk Plug (Spigot x FIPT)

Female Adapter with Raised Plug (Hub x FIPT) Fitting Cleanout with Raised Plug (Spigot x FIPT)

IntelliCap with 3M Marker IntelliDisc with 3M Marker

Skirt Gasket for Saddle Tee Skirt Gasket for Saddle Wye

Stainless Steel Clamp (QuickLock) 1/2” Width Stainless Steel Clamp (Standard) 9/16” Width

Saddle Tee with DWV Inlet and SS ClampsSolvent Skirt x Solvent DWV Inlet

Saddle Wye with DWV Inlet and SS ClampsSolvent Skirt x Solvent DWV Inlet

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable

Page 11: Solvent Weld Sewer Fittings SDR 35 P Injection … Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3” – 12” Fabricated in Sizes 10” – 36” Royal Building Products (formerly

PSolvent Weld Sewer Fittings SDR 35

Page P11

www.royalbuildingproducts.com

-

*6 x 4*8 x 4*8 x 6*10 x 4*10 x 610 x 8*12 x 4*12 x 612 x 812 x 10*15 x 4*15 x 615 x 815 x 1015 x 12*18 x 4*18 x 618 x 818 x 1018 x 1218 x 1521 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1824 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2127 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2430 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2736 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

*6 x 4*8 x 4*8 x 6

*6 x 4*8 x 4*8 x 6*10 x 4*10 x 610 x 8*12 x 4*12 x 612 x 812 x 10*15 x 4*15 x 615 x 815 x 1015 x 1218 x 418 x 618 x 818 x 1018 x 1218 x 1521 x 421 x 621 x 821 x 1021 x 1221 x 1521 x 1824 x 424 x 624 x 824 x 1024 x 1224 x 1524 x 1824 x 2127 x 427 x 627 x 827 x 1027 x 1227 x 1527 x 1827 x 2127 x 2430 x 430 x 630 x 830 x 1030 x 1230 x 1530 x 1830 x 2130 x 2430 x 2736 x 436 x 636 x 836 x 1036 x 1236 x 1536 x 1836 x 2136 x 2436 x 2736 x 30

* 6 x 4* 8 x 4* 8 x 6

P1634

P2106-4P2108-4P2108-6P2110-4P2110-6P2110-8P2112-4P2112-6P2112-8P2112-10P2115-4P2115-6P2115-8P2115-10P2115-12P2118-4P2118-6P2118-8P2118-10P2118-12P2118-15P2121-4P2121-6P2121-8P2121-10P2121-12P2121-15P2121-18P2124-4 P2124-6P2124-8P2124-10P2124-12P2124-15P2124-18P2124-21P2127-4P2127-6P2127-8P2127-10P2127-12P2127-15P2127-18P2127-21P2127-24P2130-4P2130-6P2130-8P2130-10P2130-12P2130-15P2130-18P2130-21P2130-24P2130-27P2136-4P2136-6P2136-8P2136-10P2136-12P2136-15P2136-18P2136-21P2136-24P2136-27P2136-30

P4106-4P4108-4P4108-6

P2306-4P2308-4P2308-6P2310-4P2310-6P2310-8P2312-4P2312-6P2312-8P2312-10P2315-4P2315-6P2315-8P2315-10P2315-12P2318-4P2318-6P2318-8P2318-10P2318-12P2318-15P2321-4P2321-6P2321-8P2321-10P2321-12P2321-15P2321-18P2324-4P2324-6P2324-8P2324-10P2324-12P2324-15P2324-18P2324-21P2327-4P2327-6P2327-8P2327-10P2327-12P2327-15P2327-18P2327-21P2327-24P2330-4P2330-6P2330-8P2330-10P2330-12P2330-15P2330-18P2330-21P2330-24P2330-27P2336-4P2336-6P2336-8P2336-10P2336-12P2336-15P2336-18P2336-21P2336-24P2336-27P2336-30

P4306-4P4308-4P4308-6

POR

55.1676.7685.0990.43

103.31251.0092.95

106.78296.05386.36145.36168.23365.30443.00640.21213.84228.61411.02483.15669.21729.68165.35181.67517.51574.23820.98896.17

1,330.99179.30315.21524.28580.83825.02902.90

1,398.271,574.16

283.08304.66550.49609.86866.28948.03

1,468.191,652.891,899.02

380.39409.39578.01640.35909.58995.43

1,541.611,735.531,993.972,220.36

475.47511.74606.92672.39955.06

1,045.201,618.691,822.332,093.682,643.283,304.12

73.19117.11133.90

57.4678.6983.1792.34

104.13335.9495.30

127.56474.92578.14184.26194.25636.72722.22880.31161.11172.28675.56766.53911.48

1,005.21173.06184.36877.39979.40

1,174.311,261.101,576.38

184.85225.61921.24

1,028.361,233.031,324.171,655.201,779.34

304.32327.52967.30

1,079.781,294.671,390.371,737.951,868.312,008.44

399.41429.87

1,015.651,133.771,359.401,459.891,824.851,961.732,108.862,410.03

511.12550.12

1,066.441,190.451,427.371,532.901,916.102,059.812,410.033,012.523,765.66

79.80129.70142.82

-

------------------------------------------------------------------

---

------------------------------------------------------------------

---

1

664321421133111111111111111122111111111111111111111111111111111111

664

664421321132111111111111111111111111111111111111111111111111111111

661

Item ItemSize InInches

Size InInches

PartNumber

PartNumber

ListPrice

ListPrice

CrateQty

CrateQty

BoxQty

BoxQty

Locator for 3M Marker

Saddle Tee with Stainless Steel ClampsExtended Solvent Skirt x Solvent Sewer Inlet

Saddle Tee with Locator Ring and SS ClampsExtended Solvent Skirt with Locator Ring x Solvent Sewer Inlet

Saddle Wye with Stainless Steel Clamps Extended Solvent Skirt x Solvent Sewer Inlet

Saddle Wye with Locator Ring and SS Clamps Extended Solvent Skirt with Locator Ring x Solvent Sewer Inlet

* Denotes Molded Fitting† Denotes Assembled from Molded Components• Additional Sizes Available Upon Request

• Third party tested and listed by CSA, NSF and UPC • Specifications: ASTM D3034, F679, CSA B182.2• Non-Stock items are non-cancelable, non-returnable