sti™ gasketed sewer fittings sdr 35 injection molded in ... · pdf filesti™...

STI™ Gasketed Sewer Fittings SDR 35Injection Molded in Sizes 4” – 12” Fabricated in Sizes 15” – 36”

STI™ fittings feature a one-piece integral bell and an extended pre-

alignment entrance that aids in proper alignment of pipe and fittings.

In addition to scientifically formulated resins, square pipe stops resist

pipe push-through while extra heavy support is provided under the

pipe stop at branch intersections for added strength. Where available,

reducing branches on injection molded 8”, 10”, and 12” tees, wyes,

and tee-wyes shall be minimum DR18 wall thickness in the reducing

branch body and reducing branch hub area below the gasket race.

Applications

STI™ Gasketed Sewer fittings are intended for non-pressure drainage

of sewage and surface water.

Certification

STI™ Gasketed Sewer fittings are third party tested and listed by NSF,

UPC and CSA to meet specifications defined in ASTM D 3034, ASTM

F 1336 and CSA B182.2, where applicable.

Product Spotlights

Controlled Settlement Joint

The controlled settlement joint (CSJ) inhibits penetration of the riser

through the lateral connection and into the waterway. The new double

gasketed CSJ is a “slip joint” that permits a maximum of 5-1/2” of

axial movement of the riser with forces exceeding 500 lb/feet. Riser

movement typically occurs from settlement forces or concentrated

loads resulting from elevation changes in service connections.

The controlled settlement joint in conjunction with proper backfill

techniques, offers a solution that inhibits damage such as splitting,

cracking, or spearing. As a result, this minimizes costly excavation

and replacement of damaged system components. Plastic Trends’

Controlled Settlement Joint has certification listing through CSA. It is

available in diameters of 4”, 5”, or 6’ and in SDR 26, SDR 28, or SDR

35. Refer to page G8 for pricing and available configurations.

Vertical Riser Adapter (G984, G986, G988)

This simple solution in conjunction with the unique integral flange,

inhibits system failure due to pipe spearing beyond the pipe stop.

Refer to page G10 for pricing and available configurations.

Short Specs

STI™ Gasketed Sewer Fittings

SDR 35 (4”-12”)

4” through 12” injection molded gasketed SDR 35 sewer fittings shall

be manufactured in accordance with ASTM D 3034, ASTM F1336, and

CSA B182.2. They shall be injection molded from virgin PVC compound

having a cell classification of 12454 or 13343 in accordance with, and

certified by the National Sanitation Foundation (NSF), to meet ASTM

D 1784. Gaskets shall be manufactured in accordance with ASTM F

477 or ASTM F 913. Gaskets shall be firmly seated in fitting in order to

ensure proper installation and to prevent dislocation or misalignment

during system assembly. Gasket joints must comply with ASTM D 3212

Internal Pressure Test (exfiltration) and Vacuum Test (infiltration) at 5

degrees of gasket joint deflection and top load deflection.

Where available, reducing branches on injection molded 8”, 10”, and

12” tees, wyes, and tee-wyes shall be minimum DR18 wall thickness

in the reducing branch body and reducing branch hub area below the

gasket race.

Gasketed SDR 35 sewer fittings shall be certified by the National

Sanitation Foundation (NSF) and, in applicable configurations, by the

International Association Of Plumbing And Municipal Officials (IAPMO)

to meet ASTM D 3034, and by the Canadian Standards Association

(CSA) to meet CSA B182.2.

ATTENTION: Plastic Trends fittings are not to be used with compressed

air or gases. Plastic Trends does not recommend that piping systems

that include its products be tested with compressed air or gases.

Third Party Tested

G

Sam Roberts & Associates, Inc. • www.StanRoberts.comSouth Texas3300 CapitolHouston, Texas 77003-3305713-224-9845800-392-6583Fax: 713-224-3611

North Texas1220 Round Table Dr.Dallas, Texas 75247-3504214-637-2816800-462-1195Fax: 214-688-4155

Page G2*Denotes Molded Fitting • Items in Bold feature Heavy Duty Branches (SDR18) †Denotes Assembled from Molded Components • Specifications: ASTM D3034, F1336, CSA B182.2

• Third party tested and listed by CSA, NSF and UPC• Additional Sizes Available Upon Request • Non-Stock items are non-cancelable, non-returnable

Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195Company Logo Gasketed Sewer Fittings SDR35 G

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Straight Tee GxGxG 45 Degree Wye GxGxG *4 x 4 G104 12 - 27.60 *4 x 4 G304 10 - 29.38 *6 x 4 G106-4 4 54 57.87 *6 x 4 G306-4 4 50 59.59 *6 x 6 G106 4 50 59.16 *6 x 6 G306 4 20 67.47 *8 x 4 G108-4 2 30 88.45 *8 x 4 G308-4 3 32 88.91 *8 x 6 G108-6 2 30 92.49 *8 x 6 G308-6 2 28 106.03 *8 x 8 G108 2 13 131.25 *8 x 8 G308 2 12 184.86 *10 x 4 G1010-4 1 12 290.45 *10 x 4 G3010-4 1 24 304.97 *10 x 6 G1010-6 1 11 295.35 *10 x 6 G3010-6 1 20 310.12 *10 x 8 G1010-8 1 10 467.29 *10 x 8 G3010-8 1 - 490.65 *10 x 10 G1010 1 10 479.77 *10 x 10 G3010 1 - 545.87 *12 x 4 G1012-4 1 8 355.12 *12 x 4 G3012-4 1 8 389.41 *12 x 6 G1012-6 1 8 374.28 *12 x 6 G3012-6 1 6 401.55 *12 x 8 G1012-8 1 7 513.65 *12 x 8 G3012-8 1 - 599.86 *12 x 10 G1012-10 1 7 602.30 *12 x 10 G3012-10 1 - 733.21 *12 x 12 G1012 1 6 689.40 *12 x 12 G3012 1 - 763.32 15 x 4 L1015-4 1 - 576.51 15 x 4 L3015-4 1 - 587.42 15 x 6 L1015-6 1 - 620.92 15 x 6 L3015-6 1 - 703.55 15 x 8 L1015-8 1 - 668.50 15 x 8 L3015-8 1 - 784.56 15 x 10 L1015-10 1 - 744.22 15 x 10 L3015-10 1 - 942.87 15 x 12 L1015-12 1 - 878.20 15 x 12 L3015-12 1 - 1,050.33 15 x 15 L1015 1 - 1,140.63 15 x 15 L3015 1 - 1,326.24 18 x 4 L1018-4 1 - 1,454.89 18 x 4 L3018-4 1 - 1,527.64 18 x 6 L1018-6 1 - 1,504.21 18 x 6 L3018-6 1 - 1,579.42 18 x 8 L1018-8 1 - 1,571.57 18 x 8 L3018-8 1 - 1,650.15 18 x 10 L1018-10 1 - 1,632.05 18 x 10 L3018-10 1 - 1,713.65 18 x 12 L1018-12 1 - 1,676.68 18 x 12 L3018-12 1 - 1,760.51 18 x 15 L1018-15 1 - 1,785.62 18 x 15 L3018-15 1 - 1,828.45 18 x 18 L1018 1 - 1,885.62 18 x 18 L3018 1 - 2,375.03 21 x 4 L1021-4 1 - 2,046.68 21 x 4 L3021-4 1 - 2,173.32 21 x 6 L1021-6 1 - 2,195.50 21 x 6 L3021-6 1 - 2,329.59 21 x 8 L1021-8 1 - 2,358.34 21 x 8 L3021-8 1 - 2,627.26 21 x 10 L1021-10 1 - 2,533.99 21 x 10 L3021-10 1 - 2,961.38 21 x 12 L1021-12 1 - 2,716.09 21 x 12 L3021-12 1 - 3,202.73 21 x 15 L1021-15 1 - 3,031.52 21 x 15 L3021-15 1 - 3,709.28 21 x 18 L1021-18 1 - 3,440.00 21 x 18 L3021-18 1 - 4,368.14 21 x 21 L1021 1 - 4,559.72 21 x 21 L3021 1 - 5,715.73 24 x 4 L1024-4 1 - 3,229.42 24 x 4 L3024-4 1 - 3,390.89 24 x 6 L1024-6 1 - 3,915.87 24 x 6 L3024-6 1 - 4,111.66 24 x 8 L1024-8 1 - 3,977.88 24 x 8 L3024-8 1 - 4,406.55 24 x 10 L1024-10 1 - 4,153.65 24 x 10 L3024-10 1 - 4,569.02 24 x 12 L1024-12 1 - 4,229.53 24 x 12 L3024-12 1 - 4,652.48 24 x 15 L1024-15 1 - 4,395.29 24 x 15 L3024-15 1 - 4,834.82 24 x 18 L1024-18 1 - 6,082.45 24 x 18 L3024-18 1 - 6,690.70 24 x 21 L1024-21 1 - 6,580.31 24 x 21 L3024-21 1 - 7,238.34 24 x 24 L1024 1 - 8,085.52 24 x 24 L3024 1 - 8,894.07 27 x 4 L1027-4 1 - 4,225.07 27 x 4 L3027-4 1 - 4,436.32 27 x 6 L1027-6 1 - 4,250.35 27 x 6 L3027-6 1 - 4,462.87 27 x 8 L1027-8 1 - 4,852.01 27 x 8 L3027-8 1 - 5,203.06 27 x 10 L1027-10 1 - 5,103.16 27 x 10 L3027-10 1 - 5,358.32 27 x 12 L1027-12 1 - 5,580.19 27 x 12 L3027-12 1 - 6,138.21 27 x 15 L1027-15 1 - 6,299.47 27 x 15 L3027-15 1 - 6,929.42 27 x 18 L1027-18 1 - 6,455.02 27 x 18 L3027-18 1 - 7,100.52 27 x 21 L1027-21 1 - 6,648.35 27 x 21 L3027-21 1 - 7,420.97 27 x 24 L1027-24 1 - 8,225.86 27 x 24 L3027-24 1 - 8,637.15 27 x 27 L1027 1 - 8,458.53 27 x 27 L3027 1 - 9,008.24 30 x 4 L1030-4 1 - 5,429.38 30 x 4 L3030-4 1 - 5,700.85 30 x 6 L1030-6 1 - 5,461.93 30 x 6 L3030-6 1 - 5,735.03 30 x 8 L1030-8 1 - 6,234.97 30 x 8 L3030-8 1 - 6,686.12 30 x 10 L1030-10 1 - 6,557.75 30 x 10 L3030-10 1 - 6,885.64 30 x 12 L1030-12 1 - 7,170.83 30 x 12 L3030-12 1 - 7,887.91 30 x 15 L1030-15 1 - 8,095.08 30 x 15 L3030-15 1 - 8,904.59 30 x 18 L1030-18 1 - 8,295.09 30 x 18 L3030-18 1 - 9,124.60 30 x 21 L1030-21 1 - 8,543.49 30 x 21 L3030-21 1 - 9,536.31 30 x 24 L1030-24 1 - 10,570.67 30 x 24 L3030-24 1 - 11,099.20 30 x 27 L1030-27 1 - 10,869.52 30 x 27 L3030-27 1 - 11,576.08 30 x 30 L1030 1 - 13,586.95 30 x 30 L3030 1 - 14,470.08 36 x 4 L1036-4 1 - 7,221.07 36 x 4 L3036-4 1 - 7,582.12 36 x 6 L1036-6 1 - 7,264.37 36 x 6 L3036-6 1 - 7,627.59 36 x 8 L1036-8 1 - 8,349.00 36 x 8 L3036-8 1 - 8,766.45 36 x 10 L1036-10 1 - 8,721.81 36 x 10 L3036-10 1 - 9,157.90 36 x 12 L1036-12 1 - 9,537.19 36 x 12 L3036-12 1 - 10,014.05 36 x 15 L1036-15 1 - 10,766.45 36 x 15 L3036-15 1 - 11,304.77 36 x 18 L1036-18 1 - 11,032.47 36 x 18 L3036-18 1 - 11,584.09 36 x 21 L1036-21 1 - 11,919.75 36 x 21 L3036-21 1 - 12,515.74 36 x 24 L1036-24 1 - 14,059.00 36 x 24 L3036-24 1 - 14,761.95 36 x 27 L1036-27 1 - 14,469.30 36 x 27 L3036-27 1 - 15,192.77 36 x 30 L1036-30 1 - 19,227.09 36 x 30 L3036-30 1 - 20,188.44 36 x 36 L1036 1 - 25,572.04 36 x 36 L3036 1 - 26,850.64 *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC

Page G1 †Denotes Assembled from Molded Components Specifications: ASTM D3034, F1336, CSA B182.2 Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable

Gasketed Sewer Fittings SDR35



Gwww.StanRoberts.com Company Logo Gasketed Sewer Fittings SDR35 G

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Straight Tee SxGxG 45 Degree Wye SxGxG *4 x 4 G124 15 - 36.27 *4 x 4 G324 8 - 43.32 *6 x 4 G126-4 4 28 74.67 *6 x 4 G326-4 4 50 97.75 *6 x 6 G126 4 - 82.88 *6 x 6 G326 4 20 105.80 *8 x 4 G128-4 2 - 101.72 *8 x 4 G328-4 3 32 113.34 *8 x 6 G128-6 2 18 106.36 *8 x 6 G328-6 2 28 121.94 *8 x 8 G128 2 - 150.94 *8 x 8 G328 2 12 212.59 10 x 4 G12710-4 1 - 334.16 10 x 4 L3210-4 - - 350.41 10 x 6 G12710-6 1 - 354.68 10 x 6 L3210-6 - - 356.64 10 x 8 G12710-8 1 - 537.46 10 x 8 L3210-8 - - 564.25 10 x 10 G12710 1 - 551.74 10 x 10 L3210 - - 627.75 12 x 4 G12712-4 1 - 408.39 12 x 4 L3212-4 - - 447.82 12 x 6 G12712-6 1 - 430.42 12 x 6 L3212-6 - - 461.78 12 x 8 G12712-8 1 - 590.71 12 x 8 L3212-8 - - 689.84 12 x 10 G12712-10 1 - 692.61 12 x 10 L3212-10 - - 843.19 12 x 12 G12712 1 - 792.80 12 x 12 L3212 - - 877.82 15 x 4 L12715-4 1 - 662.99 15 x 4 L3215-4 - - 675.53 15 x 6 L12715-6 1 - 714.06 15 x 6 L3215-6 - - 809.08 15 x 8 L12715-8 1 - 768.78 15 x 8 L3215-8 - - 902.24 15 x 10 L12715-10 1 - 855.85 15 x 10 L3215-10 - - 1,084.30 15 x 12 L12715-12 1 - 1,009.93 15 x 12 L3215-12 - - 1,207.88 15 x 15 L12715 1 - 1,311.69 15 x 15 L3215 - - 1,525.18 18 x 4 L12718-4 1 - 1,673.14 18 x 4 L3218-4 - - 1,756.79 18 x 6 L12718-6 1 - 1,729.84 18 x 6 L3218-6 - - 1,816.33 18 x 8 L12718-8 1 - 1,807.31 18 x 8 L3218-8 - - 1,897.67 18 x 10 L12718-10 1 - 1,876.86 18 x 10 L3218-10 - - 1,970.70 18 x 12 L12718-12 1 - 1,928.17 18 x 12 L3218-12 - - 2,024.59 18 x 15 L12718-15 1 - 2,053.46 18 x 15 L3218-15 - - 2,102.70 18 x 18 L12718 1 - 2,168.49 18 x 18 L3218 - - 2,732.29 21 x 4 L12721-4 1 - 2,353.68 21 x 4 L3221-4 - - 2,499.32 21 x 6 L12721-6 1 - 2,524.83 21 x 6 L3221-6 - - 2,679.03 21 x 8 L12721-8 1 - 2,712.09 21 x 8 L3221-8 - - 3,021.35 21 x 10 L12721-10 1 - 2,914.09 21 x 10 L3221-10 - - 3,405.59 21 x 12 L12721-12 1 - 3,123.50 21 x 12 L3221-12 - - 3,683.13 21 x 15 L12721-15 1 - 3,486.25 21 x 15 L3221-15 - - 4,265.71 21 x 18 L12721-18 1 - 3,956.00 21 x 18 L3221-18 - - 5,023.27 21 x 21 L12721 1 - 5,243.63 21 x 21 L3221 - - 6,573.11 24 x 4 L12724-4 1 - 3,713.83 24 x 4 L3224-4 - - 3,899.52 24 x 6 L12724-6 1 - 4,503.25 24 x 6 L3224-6 - - 4,953.58 24 x 8 L12724-8 1 - 4,574.56 24 x 8 L3224-8 - - 5,067.53 24 x 10 L12724-10 1 - 4,776.72 24 x 10 L3224-10 - - 5,254.37 24 x 12 L12724-12 1 - 4,863.96 24 x 12 L3224-12 - - 5,350.35 24 x 15 L12724-15 1 - 5,054.58 24 x 15 L3224-15 - - 5,560.04 24 x 18 L12724-18 1 - 6,994.80 24 x 18 L3224-18 - - 7,694.31 24 x 21 L12724-21 1 - 7,567.36 24 x 21 L3224-21 - - 8,324.09 24 x 24 L12724 1 - 9,298.35 24 x 24 L3224 - - 10,228.18 27 x 4 L12727-4 1 - 4,858.83 27 x 4 L3227-4 - - 5,344.71 27 x 6 L12727-6 1 - 4,887.90 27 x 6 L3227-6 - - 5,376.69 27 x 8 L12727-8 1 - 5,579.81 27 x 8 L3227-8 - - 6,137.79 27 x 10 L12727-10 1 - 5,868.63 27 x 10 L3227-10 - - 6,455.49 27 x 12 L12727-12 1 - 6,417.22 27 x 12 L3227-12 - - 7,058.94 27 x 15 L12727-15 1 - 7,244.39 27 x 15 L3227-15 - - 7,968.83 27 x 18 L12727-18 1 - 7,423.27 27 x 18 L3227-18 - - 8,165.60 27 x 21 L12727-21 1 - 7,645.60 27 x 21 L3227-21 - - 8,534.12 27 x 24 L12727-24 1 - 9,459.74 27 x 24 L3227-24 - - 10,405.71 27 x 27 L12727 1 - 9,727.31 27 x 27 L3227 - - 10,700.04 30 x 4 L12730-4 1 - 6,243.79 30 x 4 L3230-4 - - 6,868.17 30 x 6 L12730-6 1 - 6,281.22 30 x 6 L3230-6 - - 6,909.34 30 x 8 L12730-8 1 - 7,170.22 30 x 8 L3230-8 - - 7,887.24 30 x 10 L12730-10 1 - 7,541.41 30 x 10 L3230-10 - - 8,295.55 30 x 12 L12730-12 1 - 8,246.46 30 x 12 L3230-12 - - 9,071.10 30 x 15 L12730-15 1 - 9,309.34 30 x 15 L3230-15 - - 10,240.28 30 x 18 L12730-18 1 - 9,539.35 30 x 18 L3230-18 - - 10,493.29 30 x 21 L12730-21 1 - 9,825.01 30 x 21 L3230-21 - - 10,966.76 30 x 24 L12730-24 1 - 12,156.27 30 x 24 L3230-24 - - 13,371.90 30 x 27 L12730-27 1 - 12,499.95 30 x 27 L3230-27 - - 13,749.95 30 x 30 L12730 1 - 15,624.99 30 x 30 L3230 - - 17,187.49 36 x 4 L12736-4 1 - 7,815.98 36 x 4 L3236-4 - - 8,719.44 36 x 6 L12736-6 1 - 8,166.44 36 x 6 L3236-6 - - 8,983.08 36 x 8 L12736-8 1 - 9,601.35 36 x 8 L3236-8 - - 10,561.49 36 x 10 L12736-10 1 - 9,723.02 36 x 10 L3236-10 - - 10,695.32 36 x 12 L12736-12 1 - 10,273.18 36 x 12 L3236-12 - - 11,516.16 36 x 15 L12736-15 1 - 11,198.93 36 x 15 L3236-15 - - 13,000.49 36 x 18 L12736-18 1 - 12,059.88 36 x 18 L3236-18 - - 13,321.70 36 x 21 L12736-21 1 - 13,707.71 36 x 21 L3236-21 - - 15,078.48 36 x 24 L12736-24 1 - 15,341.00 36 x 24 L3236-24 - - 17,642.15 36 x 27 L12736-27 1 - 16,639.70 36 x 27 L3236-27 - - 18,303.67 36 x 30 L12736-30 1 - 20,800.28 36 x 30 L3236-30 - - 23,216.71 36 x 36 L12736 1 - 26,000.35 36 x 36 L3236 - - 30,878.24 *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC





Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Straight Tee with DWV Branch GxGxDWV G 45 Degree Wye with DWV Branch GxGxDWV G *8 x 4 H118-4 2 28 147.21 *8 x 4 H318-4 2 14 150.14 *8 x 6 H118-6 2 26 163.97 *8 x 6 H318-6 2 12 172.34 †10 x 4 G1110-4 1 - 348.99 †10 x 4 L3110-4 1 - 363.51 †10 x 6 G1110-6 1 - 379.61 †10 x 6 L3110-6 1 - 394.38 †12 x 4 G1112-4 1 - 413.66 †12 x 4 L3112-4 1 - 447.95 †12 x 6 G1112-6 1 - 458.54 †12 x 6 L3112-6 1 - 485.81 15 x 4 L1115-4 1 - 665.87 15 x 4 L3115-4 1 - 678.47 15 x 6 L1115-6 1 - 717.16 15 x 6 L3115-6 1 - 812.60 18 x 4 L1118-4 1 - 1,680.40 18 x 4 L3118-4 1 - 1,764.42 18 x 6 L1118-6 1 - 1,737.36 18 x 6 L3118-6 1 - 1,824.23 21 x 4 L1121-4 1 - 2,363.92 21 x 4 L3121-4 1 - 2,510.19 21 x 6 L1121-6 1 - 2,535.80 21 x 6 L3121-6 1 - 2,690.68 24 x 4 L1124-4 1 - 3,729.98 24 x 4 L3124-4 1 - 3,916.48 24 x 6 L1124-6 1 - 4,522.83 24 x 6 L3124-6 1 - 4,975.12 27 x 4 L1127-4 1 - 4,879.96 27 x 4 L3127-4 1 - 5,123.95 27 x 6 L1127-6 1 - 4,909.15 27 x 6 L3127-6 1 - 5,618.45 For fabricated Tees – use “L” Prefix For fabricated Wyes – use “L” Prefix

Straight Tee with DWV Branch GxGxDWV H 45 Degree Wye with DWV Branch GxGxDWV H *8 x 4 G138-4 2 16 92.87 *8 x 4 G338-4 3 32 98.53 *8 x 6 H138-6 2 28 156.16 *8 x 6 H338-6 2 12 164.16 †10 x 4 G1310-4 1 - 317.93 †10 x 4 L3310-4 1 - 332.45 †10 x 6 G1310-6 1 - 360.29 †10 x 6 L3310-6 1 - 375.06 †12 x 4 G1312-4 1 - 382.60 †12 x 4 L3312-4 1 - 416.89 †12 x 6 G1312-6 1 - 439.22 †12 x 6 L3312-6 1 - 466.49 15 x 4 L1315-4 1 - 634.16 15 x 4 L3315-4 1 - 646.16 15 x 6 L1315-6 1 - 683.01 15 x 6 L3315-6 1 - 773.91 18 x 4 L1318-4 1 - 1,600.38 18 x 4 L3318-4 1 - 1,680.40 18 x 6 L1318-6 1 - 1,654.63 18 x 6 L3318-6 1 - 1,737.36 21 x 4 L1321-4 1 - 2,251.35 21 x 4 L3321-4 1 - 2,390.65 21 x 6 L1321-6 1 - 2,415.05 21 x 6 L3321-6 1 - 2,562.55 24 x 4 L1324-4 1 - 3,552.36 24 x 4 L3324-4 1 - 3,729.98 24 x 6 L1324-6 1 - 4,307.46 24 x 6 L3324-6 1 - 4,738.21 27 x 4 L1327-4 1 - 4,647.58 27 x 4 L3327-4 1 - 4,879.95 27 x 6 L1327-6 1 - 4,675.39 27 x 6 L3327-6 1 - 5,350.90 For fabricated Tees – use “L” Prefix For fabricated Wyes – use “L” Prefix

Combo Wye & 1/8 Bend GxGxG (2 Piece) Double 45 Degree Wye GxGxGxG †4 x 4 G1654 1 - 52.21 4 x 4 L364-4 1 - 120.36 †6 x 4 G1656-4 1 20 82.42 *6 x 4 G366-4 3 15 83.72 †6 x 6 G1656 1 16 105.62 *6 x 6 G366-6 2 15 160.63 †8 x 4 G1658-4 1 14 111.74 8 x 4 L368-4 1 12 173.87 †8 x 6 G1658-6 1 10 144.18 8 x 6 L368-6 1 10 200.93 †8 x 8 G1658 1 8 285.07 8 x 8 L368-8 1 - 380.03 †10 x 4 G16510-4 1 10 338.43 10 x 4 L3610-4 1 - 498.95 †10 x 6 G16510-6 1 8 387.79 10 x 6 L3610-6 1 - 516.65 †10 x 8 G16510-8 1 8 595.21 10 x 8 L3610-8 1 - 741.62 †10 x 10 G16510 1 4 808.44 10 x 10 L3610 1 - 810.88 †12 x 4 G16512-4 1 8 417.01 12 x 4 L3612-4 1 - 631.12 †12 x 6 G16512-6 1 6 444.42 12 x 6 L3612-6 1 - 663.10 †12 x 8 G16512-8 1 5 699.86 12 x 8 L3612-8 1 - 906.53 †12 x 10 G16512-10 1 4 995.78 12 x 10 L3612-10 1 - 1,063.16 †12 x 12 G16512 1 - 1,132.12 12 x 12 L3612 1 - 1,144.98 15 x 4 L16515-4 1 4 672.85 15 x 4 L3615-4 1 - 933.21 15 x 6 L16515-6 1 4 744.22 15 x 6 L3615-6 1 - 1,063.80 15 x 8 L16515-8 1 4 884.55 15 x 8 L3615-8 1 - 1,115.85 15 x 10 L16515-10 1 - 1,205.44 15 x 10 L3615-10 1 - 1,367.16 15 x 12 L16515-12 1 - 1,419.13 15 x 12 L3615-12 1 - 1,575.50 15 x 15 L16515 1 - 2,158.22 15 x 15 L3615 1 - 2,055.67 18 x 4 L16518-4 1 3 1,550.47 18 x 4 L3618-4 1 - 1,985.93 18 x 6 L16518-6 1 2 1,617.57 18 x 6 L3618-6 1 - 2,132.22 18 x 8 L16518-8 1 2 1,750.14 18 x 8 L3618-8 1 - 2,310.21 21 x 4 L16521-4 1 - 2,196.15 21 x 4 L3621-4 1 - 2,825.32 21 x 6 L16521-6 1 - 2,367.74 21 x 6 L3621-6 1 - 3,144.95 21 x 8 L16521-8 1 - 2,874.84 21 x 8 L3621-8 1 - 3,678.16 24 x 4 L16524-4 1 - 3,618.08 24 x 4 L3624-4 1 - 4,408.16 24 x 6 L16524-6 1 - 4,345.61 24 x 6 L3624-6 1 - 5,815.07 24 x 8 L16524-8 1 - 4,506.54 24 x 8 L3624-8 1 - 6,169.17 27 x 4 L16527-4 1 - 4,460.99 27 x 4 L3627-4 1 - 5,767.22 27 x 6 L16527-6 1 - 4,577.18 27 x 6 L3627-6 1 - 6,024.88 27 x 8 L16527-8 1 - 5,303.05 27 x 8 L3627-8 1 - 7,284.28 30 x 4 L16530-4 1 - 5,732.52 30 x 4 L3630-4 1 - 7,411.11 30 x 6 L16530-6 1 - 5,881.93 30 x 6 L3630-6 1 - 7,742.29 30 x 8 L16530-8 1 - 6,786.11 30 x 8 L3630-8 1 - 9,360.57 36 x 4 L16536-4 1 - 7,604.95 36 x 4 L3636-4 1 - 9,856.76 36 x 6 L16536-6 1 - 7,665.74 36 x 6 L3636-6 1 - 10,297.25 36 x 8 L16536-8 1 - 8,866.44 36 x 8 L3636-8 1 - 12,273.03 *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC






Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Sanitary Tee (T-Y) GxGxG Sanitary Tee (T-Y) with DWV Branch GxGxDWV G *4 x 4 G156 10 32.80 †8 x 4 H188-4 2 14 199.49 *6 x 4 G157-4 5 56 70.99 †8 x 6 H188-6 2 10 246.05 *6 x 6 G157 2 24 82.78 10 x 4 L1810-4 1 - 406.06 *8 x 4 G158-4 3 30 93.80 10 x 6 L1810-6 1 - 465.34 *8 x 6 G158-6 2 30 111.86 12 x 4 L1812-4 1 - 500.41 *8 x 8 G158 2 12 254.52 12 x 6 L1812-6 1 - 533.30 10 x 4 L1510-4 1 - 338.38 15 x 4 L1815-4 1 - 807.42 10 x 6 L1510-6 1 - 387.78 15 x 6 L1815-6 1 - 1,027.34 10 x 8 L1510-8 1 - 595.21 18 x 4 L1818-4 1 - 1,839.80 10 x 10 L1510 1 - 789.27 18 x 6 L1818-6 1 - 1,999.55 12 x 4 L1512-4 1 - 417.01 21 x 4 L1821-4 1 - 2,751.42 12 x 6 L1512-6 1 - 444.42 21 x 6 L1821-6 1 - 2,949.26 12 x 8 L1512-8 1 - 658.62 24 x 4 L1824-4 1 - 4,341.70 12 x 10 L1512-10 1 - 975.57 24 x 6 L1824-6 1 - 5,453.24 12 x 12 L1512 1 - 1,102.68 27 x 4 L1827-4 1 - 5,883.83 15 x 4 L1515-4 1 - 672.85 27 x 6 L1827-6 1 - 5,919.36 15 x 6 L1515-6 1 - 744.45 15 x 8 L1515-8 1 - 827.71 18 x 4 L1518-4 1 - 1,611.66 Sanitary Tee (T-Y) with DWV Branch GxGxDWV H 18 x 6 L1518-6 1 - 1,666.29 *8 x 4 H198-4 2 15 148.00 18 x 8 L1518-8 1 - 1,740.91 *8 x 6 H198-6 2 14 169.88 21 x 4 L1521-4 1 - 2,292.85 10 x 4 L1910-4 1 - 372.22 21 x 6 L1521-6 1 - 2,457.72 10 x 6 L1910-6 1 - 426.56 21 x 8 L1521-8 1 - 2,874.84 12 x 4 L1912-4 1 - 458.71 24 x 4 L1524-4 1 - 3,618.08 12 x 6 L1912-6 1 - 488.86 24 x 6 L1524-6 1 - 4,544.37 15 x 4 L1915-4 1 - 740.14 24 x 8 L1524-8 1 - 4,648.91 15 x 6 L1915-6 1 - 818.90 27 x 4 L1527-4 1 - 4,903.19 18 x 4 L1918-4 1 - 1,772.83 27 x 6 L1527-6 1 - 4,932.80 18 x 6 L1918-6 1 - 1,832.92 27 x 8 L1527-8 1 - 5,489.23 21 x 4 L1921-4 1 - 2,522.14 30 x 4 L1530-4 1 - 6,014.40 21 x 6 L1921-6 1 - 2,703.49 30 x 6 L1530-6 1 - 6,050.46 24 x 4 L1924-4 1 - 3,979.89 30 x 8 L1530-8 1 - 7,999.14 24 x 6 L1924-6 1 - 4,998.81 36 x 4 L1536-4 1 - 8,047.11 27 x 4 L1927-4 1 - 5,393.51 36 x 6 L1536-6 1 - 9,248.61 27 x 6 L1927-6 1 - 5,426.08 36 x 8 L1536-8 1 - Sanitary Tee (T-Y) SxGxG Tee Cross GxGxGxG *4 x 4 G174 10 - 37.72 4 x 4 L1794 1 - 105.49 *6 x 4 G177-4 5 - 81.64 6 x 4 L1796-4 1 - 113.98 *6 x 6 G177 2 - 95.20 6 x 6 L1796 1 - 145.80 *8 x 4 G178-4 3 30 107.87 8 x 4 L1798-4 1 - 186.75 *8 x 6 G178-6 2 30 128.64 8 x 6 L1798-6 1 - 235.01 *8 x 8 G178 2 - 292.70 8 x 8 L1798 1 - 350.00 10 x 4 L1710-4 1 - 389.14 10 x 4 L17910-4 1 - 473.15 10 x 6 L1710-6 1 - 445.95 10 x 6 L17910-6 1 - 491.38 10 x 8 L1710-8 1 - 684.49 10 x 8 L17910-8 1 - 676.52 10 x 10 L1710 1 - 907.66 10 x 10 L17910 1 - 805.22 12 x 4 L1712-4 1 - 479.56 12 x 4 L17912-4 1 - 514.50 12 x 6 L1712-6 1 - 511.08 12 x 6 L17912-6 1 - 604.31 12 x 8 L1712-8 1 - 818.89 12 x 8 L17912-8 1 - 719.11 12 x 10 L1712-10 1 - 1,121.91 12 x 10 L17912-10 1 - 873.34 12 x 12 L1712 1 - 1,268.08 12 x 12 L17912 1 - 1,034.11 15 x 4 L1715-4 1 - 773.78 15 x 4 L17915-4 1 - 884.52 15 x 6 L1715-6 1 - 856.12 15 x 6 L17915-6 1 - 1,022.00 15 x 8 L1715-8 1 - 951.87 15 x 8 L17915-8 1 - 1,074.28 18 x 4 L1718-4 1 - 1,853.91 15 x 10 L17915-10 1 - 1,103.07 18 x 6 L1718-6 1 - 1,916.23 15 x 12 L17915-12 1 - 1,317.30 18 x 8 L1718-8 1 - 2,002.05 15 x 15 L17915 1 - 1,767.98 21 x 4 L1721-4 1 - 2,636.78 18 x 4 L17918-4 1 - 1,891.36 21 x 6 L1721-6 1 - 2,826.38 18 x 6 L17918-6 1 - 2,030.68 21 x 8 L1721-8 1 - 3,306.07 18 x 8 L17918-8 1 - 2,200.20 24 x 4 L1724-4 1 - 4,160.79 18 x 10 L17918-10 1 - 2,575.61 24 x 6 L1724-6 1 - 5,226.03 18 x 12 L17918-12 1 - 2,821.59 24 x 8 L1724-8 1 - 5,346.25 18 x 15 L17918-15 1 - 3,213.31 27 x 4 L1727-4 1 - 5,638.67 18 x 18 L17918 1 - 4,361.42 27 x 6 L1727-6 1 - 5,672.72 21 x 4 L17921-4 1 - 2,660.68 27 x 8 L1727-8 1 - 6,312.62 21 x 6 L17921-6 1 - 2,963.93 21 x 8 L17921-8 1 - 3,301.68 2-Way Cleanout GxGxG 24 x 4 L17924-4 1 - 4,198.25 *4 x 4 G1004 6 - 65.65 24 x 6 L17924-6 1 - 5,286.43 *6 x 6 G1006 3 21 372.77 24 x 8 L17924-8 1 - 5,569.03 27 x 4 L17927-4 1 - 5,492.59 27 x 6 L17927-6 1 - 5,737.97 27 x 8 L17927-8 1 - 6,792.81 *Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC





Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

1/4 Bend (90) GxG 1/4 Bend (90) SxG *4 G204 10 - 21.45 *4 G224 12 - 19.72 *6 G206 4 48 39.45 *6 G226 4 50 41.70 *8 G208 2 14 109.11 *8 G228 2 14 112.60 *10 G2010 1 4 366.98 *10 G2210 1 10 385.33 *12 G2012 1 6 474.88 *12 G2212 1 6 498.62 1/4 Bend (90) GxG Long Sweep 1/4 Bend (90) SxG Long Sweep *4 G256 6 - 31.13 *4 G274 6 - 28.01 *6 G257 4 24 92.35 *6 G277 4 24 102.89 *8 G258 2 12 208.31 *8 G278 2 12 228.82 †10 G2510 1 8 510.14 †10 G2710 1 8 488.46 †12 G2512 1 6 722.61 †12 G2712 1 6 697.61 15 L18015 1 - 1,002.51 15 L18215 1 - 1,002.51 18 L18018 1 - 1,695.81 18 L18218 1 - 1,695.81 21 L18021 1 - 2,912.69 21 L18221 1 - 2,912.69 24 L18024 1 - 3,894.52 24 L18224 1 - 3,894.48 27 L18027 1 - 4,517.37 27 L18227 1 - 4,517.37 30 L18030 1 - 5,575.38 30 L18230 1 - 5,575.38 36 L18036 1 - 7,826.90 36 L18236 1 - 7,826.90 Deep Socket 1/4 Bend (90) GxG (2 Piece Assembly) Deep Socket 1/4 Bend (90) SxG (2 Piece Assembly) †4 H2566 1 - 222.65 †4 H2744 1 - 222.65 †6 H2577 1 18 247.95 †6 H2777 1 18 247.95 †8 H2588 1 - 425.97 †8 H2788 1 - 425.97 1/8 Bend (45) GxG 1/8 Bend (45) SxG *4 G504 8 168 17.04 *4 G404 12 168 15.33 *6 G506 6 50 34.59 *6 G406 6 60 30.65 *8 G508 4 32 96.82 *8 G408 4 16 92.49 *10 G5010 1 12 251.26 *10 G4010 1 12 247.57 *12 G5012 1 7 364.85 *12 G4012 1 8 353.80 15 L5015 1 - 816.98 15 L4015 1 - 816.98 18 L5018 1 - 1,307.62 18 L4018 1 - 1,307.62 21 L5021 1 - 2,214.57 21 L4021 1 - 2,214.57 24 L5024 1 - 3,023.40 24 L4024 1 - 3,023.40 27 L5027 1 - 3,285.25 27 L4027 1 - 3,285.25 30 L5030 1 - 4,221.67 30 L4030 1 - 4,221.67 36 L5036 1 - 5,402.70 36 L4036 1 - 5,402.70 Deep Socket 1/8 Bend (45) GxG Deep Socket 1/8 Bend (45) SxG †4 H5044 1 - 110.80 †4 H4044 1 - 110.80 *6 H5066 5 25 125.70 *6 H4066 5 25 125.70 †8 H5088 1 - 245.18 †8 H4088 1 - 245.18 1/8 Bend (45) GxG (Extra Long Sweep Radius) 1/8 Bend (45) SxG (Extra Long Sweep Radius) 4 L4804 1 - 158.63 4 L4904 1 - 158.63 6 L4806 1 - 225.17 6 L4906 1 - 225.17 8 L4808 1 - 701.53 8 L4908 1 - 701.53 10 L48010 1 - 1,122.47 10 L49010 1 - 1,122.47 12 L48012 1 - 2,104.61 12 L49012 1 - 2,104.61 15 L48015 1 - 2,630.79 15 L49015 1 - 2,630.79 1/12 Bend (30) GxG 1/12 Bend (30) SxG 4 L1354.30 1 - 43.94 4 L1344.30 1 - 43.94 6 L1356.30 1 - 60.65 6 L1346.30 1 - 60.65 8 L1358.30 1 - 97.75 8 L1348.30 1 - 97.75 10 L13510.30 1 - 267.39 10 L13410.30 1 - 267.39 12 L13512.30 1 - 348.69 12 L13412.30 1 - 348.69 15 L13515.30 1 - 922.24 15 L13415.30 1 - 922.24 18 L13518.30 1 - 1,347.89 18 L13418.30 1 - 1,347.89 21 L13521.30 1 - 1,912.70 21 L13421.30 1 - 1,912.70 24 L13524.30 1 - 2,754.09 24 L13424.30 1 - 2,754.09 27 L13527.30 1 - 3,285.38 27 L13427.30 1 - 3,285.38 30 L13530.30 1 - 4,221.67 30 L13430.30 1 - 4,221.67 36 L13536.30 1 - 5,402.70 36 L13436.30 1 - 5,402.70 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC






Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

1/16 Bend (22.5) GxG 1/16 Bend (22.5) SxG *4 G1704 12 - 17.02 *4 G1714 15 - 16.19 *6 G1706 6 60 33.53 *6 G1716 6 60 31.83 *8 G1708 3 38 97.67 *8 G1718 4 38 102.07 *10 G17010 1 24 267.39 *10 G17110 1 24 260.08 *12 G17012 1 8 348.69 *12 G17112 1 8 341.32 15 L17015 1 - 922.24 15 L17115 1 - 922.24 18 L17018 1 - 1,347.89 18 L17118 1 - 1,347.89 21 L17021 1 - 1,912.75 21 L17121 1 - 1,912.75 24 L17024 1 - 2,754.09 24 L17124 1 - 2,754.05 27 L17027 1 - 3,285.38 27 L17127 1 - 3,285.38 30 L17030 1 - 4,221.82 30 L17130 1 - 4,221.82 36 L17036 1 - 5,402.70 36 L17136 1 - 5,402.70 Deep Socket 1/16 Bend (22.5) GxG Deep Socket 1/16 Bend (22.5) SxG †4 H17044 1 - 110.80 †4 H17144 1 - 110.80 *6 H17066 4 30 125.70 *6 H17166 5 30 125.70 †8 H17088 1 - 245.18 †8 H17188 1 - 245.18 1/16 Bend (22.5) GxG (Extra Long Sweep Radius) 1/16 Bend (22.5) SxG (Extra Long Sweep Radius) 4 L14904 1 - 158.63 4 L14904S 1 - 158.63 6 L14906 1 - 225.17 6 L14906S 1 - 225.17 8 L14908 1 - 701.53 8 L14908S 1 - 701.53 10 L14910 1 - 1,122.47 10 L14910S 1 - 1,122.47 12 L14912 1 - 2,104.61 12 L14912S 1 - 2,104.61 15 L14915 1 - 2,630.79 15 L14915S 1 - 2,630.79 1/32 Bend (11.25) GxG 1/32 Bend (11.25) SxG 4 L1934 1 - 43.94 4 L1834 1 - 43.94 6 L1936 1 - 60.65 6 L1836 1 - 60.65 8 L1938 1 - 97.75 8 L1838 1 - 97.75 10 L19310 1 - 267.39 10 L18310 1 - 267.39 12 L19312 1 - 348.69 12 L18312 1 - 348.69 15 L19315 1 - 922.24 15 L18315 1 - 922.24 18 L19318 1 - 1,347.89 18 L18318 1 - 1,347.89 21 L19321 1 - 1,912.70 21 L18321 1 - 1,912.70 24 L19324 1 - 2,754.09 24 L18324 1 - 2,754.09 27 L19327 1 - 3,285.38 27 L18327 1 - 3,285.38 30 L19330 1 - 4,221.67 30 L18330 1 - 4,221.67 36 L19336 1 - 5,402.70 36 L18336 1 - 5,402.70 Cap (G) Spigot Plug(S) *4 G1604 27 - 11.01 *4 G1164 24 - 8.30 *6 G1606 8 140 20.62 *6 G1166 15 168 12.73 *8 G1608 8 80 55.66 *8 G1168 8 - 45.16 *10 G16010 2 36 174.10 *10 G11610 2 - 150.44 *12 G16012 2 27 261.56 *12 G11612 2 - 179.80 15 L16015 1 - 423.00 15 L11615 1 - 353.84 18 L16018 1 - 614.95 18 L11618 1 - 498.21 21 L16021 1 - 1,333.90 21 L11621 1 - 985.45 24 L16024 1 - 1,540.46 24 L11624 1 - 1,481.82 27 L16027 1 - 1,942.90 27 L11627 1 - 1,811.85 30 L16030 1 - 2,496.70 30 L11630 1 - 3,239.52 36 L16036 1 - 4,271.10 36 L11636 1 - 4,145.75 Stop Coupling GxG Repair Coupling GxG *4 G604 16 - 21.06 *4 G624 16 - 21.06 *6 G606 4 60 42.05 *6 G626 4 60 42.05 *8 G608 4 38 71.42 *8 G628 4 38 71.42 *10 G6010 2 24 158.50 *10 G6210 2 24 158.50 *12 G6012 1 16 230.31 *12 G6212 1 16 230.31 15 L6015 1 - 476.50 15 L6215 1 - 476.50 18 L6018 1 - 927.57 18 L6218 1 - 927.57 21 L6021 1 - 1,580.80 21 L6221 1 - 1,580.80 24 L6024 1 - 2,302.88 24 L6224 1 - 2,302.88 27 L6027 1 - 2,596.95 27 L6227 1 - 2,596.95 30 L6030 1 - 3,337.20 30 L6230 1 - 3,337.20 36 L6036 1 - 4,271.60 36 L6236 1 - 4,271.60 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC





Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Concentric Increaser Coupling GxG Concentric Increaser Bushing SxG *6 x 4 G606-4 8 - 60.44 *6 x 4 G1216 10 - 30.65 *8 x 4 G608-4 8 - 95.96 *8 x 4 G1219 5 - 83.72 *8 x 6 G608-6 4 - 100.76 *8 x 6 G1220 5 - 93.78 *10 x 4 G6010-4 2 36 221.15 *10 x 4 G1210-4 2 36 219.43 *10 x 6 G6010-6 2 36 261.97 *10 x 6 G1210-6 2 36 227.96 *10 x 8 G6010-8 2 36 304.01 *10 x 8 G1210-8 2 36 271.10 *12 x 4 G6012-4 2 27 321.99 *12 x 4 G1212-4 2 18 292.79 *12 x 6 G6012-6 2 27 340.56 *12 x 6 G1212-6 2 18 299.15 *12 x 8 G6012-8 2 27 394.51 *12 x 8 G1212-8 2 18 342.98 *12 x 10 G6012-10 2 18 455.50 *12 x 10 G1212-10 2 18 380.32 15 x 4 L6015-4 1 - 507.29 15 x 4 L1215-4 1 - 487.70 15 x 6 L6015-6 1 - 532.90 15 x 6 L1215-6 1 - 505.83 15 x 8 L6015-8 1 - 577.93 15 x 8 L1215-8 1 - 572.56 15 x 10 L6015-10 1 - 636.74 15 x 10 L1215-10 1 - 577.05 15 x 12 L6015-12 1 - 692.33 15 x 12 L1215-12 1 - 661.86 18 x 4 L6018-4 1 - 667.24 18 x 4 L1218-4 1 - 690.45 18 x 6 L6018-6 1 - 678.74 18 x 6 L1218-6 1 - 699.78 18 x 8 L6018-8 1 - 688.77 18 x 8 L1218-8 1 - 707.19 18 x 10 L6018-10 1 - 713.02 18 x 10 L1218-10 1 - 718.00 18 x 12 L6018-12 1 - 728.20 18 x 12 L1218-12 1 - 727.32 18 x 15 L6018-15 1 - 758.47 18 x 15 L1218-15 1 - 733.25 21 x 4 L6021-4 1 - 962.44 21 x 4 L1221-4 1 - 799.14 21 x 6 L6021-6 1 - 972.42 21 x 6 L1221-6 1 - 874.62 21 x 8 L6021-8 1 - 986.22 21 x 8 L1221-8 1 - 879.84 21 x 10 L6021-10 1 - 999.25 21 x 10 L1221-10 1 - 890.33 21 x 12 L6021-12 1 - 1,051.10 21 x 12 L1221-12 1 - 911.63 21 x 15 L6021-15 1 - 1,214.08 21 x 15 L1221-15 1 - 946.76 21 x 18 L6021-18 1 - 1,308.21 21 x 18 L1221-18 1 - 1,026.61 24 x 4 L6024-4 1 - 2,006.04 24 x 4 L1224-4 1 - 1,773.31 24 x 6 L6024-6 1 - 2,025.60 24 x 6 L1224-6 1 - 1,794.38 24 x 8 L6024-8 1 - 2,048.90 24 x 8 L1224-8 1 - 1,816.72 24 x 10 L6024-10 1 - 2,059.39 24 x 10 L1224-10 1 - 1,859.15 24 x 12 L6024-12 1 - 2,123.40 24 x 12 L1224-12 1 - 1,883.30 24 x 15 L6024-15 1 - 2,176.30 24 x 15 L1224-15 1 - 1,936.95 24 x 18 L6024-18 1 - 2,293.10 24 x 18 L1224-18 1 - 2,021.50 24 x 21 L6024-21 1 - 2,487.25 24 x 21 L1224-21 1 - 2,376.05 27 x 4 L6027-4 1 - 2,059.30 27 x 4 L1227-4 1 - 1,810.59 27 x 6 L6027-6 1 - 2,068.60 27 x 6 L1227-6 1 - 1,824.19 27 x 8 L6027-8 1 - 2,090.75 27 x 8 L1227-8 1 - 1,849.28 27 x 10 L6027-10 1 - 2,114.60 27 x 10 L1227-10 1 - 1,873.60 27 x 12 L6027-12 1 - 2,223.05 27 x 12 L1227-12 1 - 1,876.78 27 x 15 L6027-15 1 - 2,235.05 27 x 15 L1227-15 1 - 1,981.61 27 x 18 L6027-18 1 - 2,327.15 27 x 18 L1227-18 1 - 2,085.95 27 x 21 L6027-21 1 - 2,681.85 27 x 21 L1227-21 1 - 2,431.80 27 x 24 L6027-24 1 - 2,905.20 27 x 24 L1227-24 1 - 2,905.21 30 x 4 L6030-4 1 - 2,636.55 30 x 4 L1230-4 1 - 2,318.40 30 x 6 L6030-6 1 - 2,737.00 30 x 6 L1230-6 1 - 2,334.50 30 x 8 L6030-8 1 - 3,389.05 30 x 8 L1230-8 1 - 2,987.70 30 x 10 L6030-10 1 - 4,337.80 30 x 10 L1230-10 1 - 3,824.90 30 x 12 L6030-12 1 - 5,552.20 30 x 12 L1230-12 1 - 4,896.70 30 x 15 L6030-15 1 - 6,267.50 30 x 15 L1230-15 1 - 6,267.50 30 x 18 L6030-18 1 - 8,022.40 30 x 18 L1230-18 1 - 8,022.40 30 x 21 L6030-21 1 - 8,395.00 30 x 21 L1230-21 1 - 8,395.30 30 x 24 L6030-24 1 - 9,430.00 30 x 24 L1230-24 1 - 9,430.00 30 x 27 L6030-27 1 - 9,660.00 30 x 27 L1230-27 1 - 9,660.05 36 x 4 L6036-4 1 - 3,372.95 36 x 4 L1236-4 1 - 2,965.85 36 x 6 L6036-6 1 - 3,389.05 36 x 6 L1236-6 1 - 2,987.70 36 x 8 L6036-8 1 - 4,337.80 36 x 8 L1236-8 1 - 3,824.90 36 x 10 L6036-10 1 - 5,552.20 36 x 10 L1236-10 1 - 4,896.75 36 x 12 L6036-12 1 - 7,107.00 36 x 12 L1236-12 1 - 6,267.50 36 x 15 L6036-15 1 - 8,012.05 36 x 15 L1236-15 1 - 8,012.05 36 x 18 L6036-18 1 - 8,395.00 36 x 18 L1236-18 1 - 8,395.00 36 x 21 L6036-21 1 - 8,855.00 36 x 21 L1236-21 1 - 8,855.05 36 x 24 L6036-24 1 - 9,775.00 36 x 24 L1236-24 1 - 9,775.10 36 x 27 L6036-27 1 - 10,235.00 36 x 27 L1236-27 1 - 10,235.05 36 x 30 L6036-30 1 - 11,753.00 36 x 30 L1236-30 1 - 11,755.05 Controlled Settlement Joint GxG Controlled Settlement Joint SxG 4 x 4 H6004 1 15 125.04 4 x 4 H6304 1 20 121.29 6 x 6 H6006 1 16 169.82 6 x 6 H6306 1 7 164.76 8 x 8 H6008 1 - 290.85 8 x 8 H6308 1 - 282.13 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC






Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Eccentric Increaser Coupling GxG Eccentric Increaser Bushing SxG *6 x 4 G616-4 12 - 63.46 *6 x 4 G1306-4 10 - 32.18 8 x 4 L618-4 5 - 100.76 *8 x 4 G1308-4 5 - 87.91 *8 x 6 G618-6 8 - 105.80 *8 x 6 G1308-6 8 - 98.47 10 x 4 L6110-4 1 - 232.21 10 x 4 L13010-4 1 - 230.40 10 x 6 L6110-6 1 - 275.07 10 x 6 L13010-6 1 - 239.36 10 x 8 L6110-8 1 - 319.21 10 x 8 L13010-8 1 - 284.66 12 x 4 L6112-4 1 - 338.02 12 x 4 L13012-4 1 - 307.43 12 x 6 L6112-6 1 - 357.59 12 x 6 L13012-6 1 - 314.11 12 x 8 L6112-8 1 - 414.24 12 x 8 L13012-8 1 - 360.13 12 x 10 L6112-10 1 - 478.28 12 x 10 L13012-10 1 - 399.34 15 x 4 L6115-4 1 - 532.65 15 x 4 L13015-4 1 - 512.09 15 x 6 L6115-6 1 - 559.55 15 x 6 L13015-6 1 - 531.12 15 x 8 L6115-8 1 - 606.85 15 x 8 L13015-8 1 - 601.19 15 x 10 L6115-10 1 - 668.55 15 x 10 L13015-10 1 - 605.90 15 x 12 L6115-12 1 - 726.95 15 x 12 L13015-12 1 - 694.95 18 x 4 L6118-4 1 - 700.60 18 x 4 L13018-4 1 - 724.97 18 x 6 L6118-6 1 - 712.65 18 x 6 L13018-6 1 - 734.77 18 x 8 L6118-8 1 - 723.20 18 x 8 L13018-8 1 - 742.55 18 x 10 L6118-10 1 - 748.70 18 x 10 L13018-10 1 - 753.06 18 x 12 L6118-12 1 - 764.65 18 x 12 L13018-12 1 - 763.69 18 x 15 L6118-15 1 - 796.40 18 x 15 L13018-15 1 - 769.91 21 x 4 L6121-4 1 - 1,010.55 21 x 4 L13021-4 1 - 839.10 21 x 6 L6121-6 1 - 1,021.05 21 x 6 L13021-6 1 - 918.35 21 x 8 L6121-8 1 - 1,035.55 21 x 8 L13021-8 1 - 923.83 21 x 10 L6121-10 1 - 1,049.25 21 x 10 L13021-10 1 - 934.85 21 x 12 L6121-12 1 - 1,103.65 21 x 12 L13021-12 1 - 957.21 21 x 15 L6121-15 1 - 1,274.80 21 x 15 L13021-15 1 - 994.10 21 x 18 L6121-18 1 - 1,373.60 21 x 18 L13021-18 1 - 1,077.94 24 x 4 L6124-4 1 - 2,106.35 24 x 4 L13024-4 1 - 1,861.98 24 x 6 L6124-6 1 - 2,126.85 24 x 6 L13024-6 1 - 1,884.10 24 x 8 L6124-8 1 - 2,151.35 24 x 8 L13024-8 1 - 1,907.56 24 x 10 L6124-10 1 - 2,162.35 24 x 10 L13024-10 1 - 1,952.11 24 x 12 L6124-12 1 - 2,229.55 24 x 12 L13024-12 1 - 1,977.47 24 x 15 L6124-15 1 - 2,285.10 24 x 15 L13024-15 1 - 2,033.78 24 x 18 L6124-18 1 - 2,407.75 24 x 18 L13024-18 1 - 2,122.57 24 x 21 L6124-21 1 - 2,611.65 24 x 21 L13024-21 1 - 2,494.82 27 x 4 L6127-4 1 - 2,162.25 27 x 4 L13027-4 1 - 1,901.12 27 x 6 L6127-6 1 - 2,172.05 27 x 6 L13027-6 1 - 1,915.40 27 x 8 L6127-8 1 - 2,195.30 27 x 8 L13027-8 1 - 1,941.74 27 x 10 L6127-10 1 - 2,220.35 27 x 10 L13027-10 1 - 1,967.28 27 x 12 L6127-12 1 - 2,334.15 27 x 12 L13027-12 1 - 1,970.62 27 x 15 L6127-15 1 - 2,346.80 27 x 15 L13027-15 1 - 2,080.69 27 x 18 L6127-18 1 - 2,443.45 27 x 18 L13027-18 1 - 2,190.25 27 x 21 L6127-21 1 - 2,815.95 27 x 21 L13027-21 1 - 2,553.40 27 x 24 L6127-24 1 - 3,050.45 27 x 24 L13027-24 1 - 3,050.47

Gasketed C900 Adapter Coupling GxG Manhole Adapter without Pipe Stop SxG Gasket SDR26 Sewer Hub x Gasket C900 Hub Sand Finish 4 x 4 H7204 1 - 100.01 4 x 4 L8904 1 - 33.87 6 x 6 H7206 1 - 120.37 6 x 6 L8906 1 - 63.85 8 x 8 H7208 1 - 387.20 8 x 8 L8908 1 - 71.27 10 x 10 H7210 1 - 474.35 10 x 10 L89010 1 - 129.58 12 x 12 H7212 1 - 568.23 12 x 12 L89012 1 - 190.00 15 x 15 H7215 1 - 1,515.92 15 x 15 L89015 1 - 243.21 18 x 18 H7218 1 - 1,812.60 18 x 18 L89018 1 - 489.16 21 x 21 H7221 1 - 2,401.15 21 x 21 L89021 1 - 691.60 24 x 24 H7224 1 - 2,566.79 24 x 24 L89024 1 - 1,151.73 27 x 27 L89027 1 - 1,337.57 30 x 30 L89030 1 - 1,898.88 36 x 36 L89036 1 - 2,614.67

Gasketed C900 Adapter Bushing SxG Gasketed C900 Adapter Bushing SxG Chamfer SDR26 Sewer Spigot x Gasket C900 Hub C900 DR25 Spigot x Gasket SDR26 Sewer Hub 4 x 4 H7404 1 - 98.56 4 x 4 H9004 1 - 96.16 6 x 6 H7406 1 - 118.63 6 x 6 H9006 1 - 115.74 8 x 8 H7408 1 - 381.62 8 x 8 H9008 1 - 372.31 10 x 10 H7410 1 - 467.51 10 x 10 H90010 1 - 456.11 12 x 12 H7412 1 - 560.03 12 x 12 H90012 1 - 546.37 15 x 15 H7415 1 - 1,493.18 15 x 15 H90015 1 - 1,456.82 18 x 18 H7418 1 - 1,786.45 18 x 18 H90018 1 - 1,742.88 21 x 21 H7421 1 - 2,365.13 21 x 21 H90021 1 - 2,307.54 24 x 24 H7424 1 - 2,529.77 24 x 24 H90024 1 - 2,468.07

*Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC Page G8 †Denotes Assembled from Molded Components Specifications: ASTM D3034, F1336, CSA B182.2

Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable




Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Gasketed Sewer Adapter HxG Gasketed Sewer Adapter SxG Solvent Sewer Hub x Gasket Sewer Hub Solvent Sewer Spigot x Gasket Sewer Hub *4 x 4 G644 6 - 21.13 *4 x 4 G904 6 - 23.66 *6 x 4 G646-4 8 - 36.31 *6 x 6 G906 4 - 44.36 *6 x 6 G646 4 - 46.30 *8 x 8 G908 4 - 102.65 *8 x 8 G648 4 - 107.02 10 x 10 L9010 1 - 106.25 12 x 12 L9012 1 - 161.65 15 x 15 L9015 1 - 244.45 18 x 18 L9018 1 - 537.15 21 x 21 L9021 1 - 590.95 24 x 24 L9024 1 - 1,068.20 27 x 27 L9027 1 - 1,244.85 Gasketed DWV Adapter Coupling GxDWV G Gasketed DWV Adapter Bushing SxDWV G Gasket Sewer Hub x Gasket DWV Hub Chamfer Sewer Spigot x Gasket DWV Hub *4 x 4 H657 6 - 55.11 *4 x 4 H1213 6 - 51.04 *6 x 4 H658 4 - 73.93 *6 x 4 H1214 5 - 69.82 *6 x 6 H659 3 - 80.90 *6 x 6 H1215 4 - 76.76 8 x 8 H6508 1 - 193.14 8 x 8 H9208 1 - 188.31 10 x 10 H6510 1 - 267.29 10 x 10 H9210 1 - 260.62 12 x 12 H6512 1 - 393.49 12 x 12 H9212 1 - 383.65 Solvent Sewer to DWV Adapter Coupling HxDWV G Solvent Weld Sewer Adapter SxH Solvent Sewer Hub x Gasket DWV Hub Chamfer Sewer Spigot x Solvent Sewer Hub *4 x 4 H954 6 - 49.11 *4 x 4 G964 8 - 31.58 *6 x 4 H956-4 4 - 62.96 6 x 6 G966 1 - 39.02 *6 x 6 H956 4 - 74.87 8 x 8 G968 1 - 90.33 8 x 8 H958 1 - 180.19 10 x 10 H9510 1 - 306.74 12 x 12 H9512 1 - 448.87

Solvent DWV Adapter Bushing SxDWV H DWV Adapter Sleeve DWV SxSewer G Chamfer Sewer Spigot x Solvent DWV Hub DWV Spigot x Gasket Sewer Hub *4 x 4 G944 8 - 19.98 *4 x 4 G1208 16 - 38.12 *6 x 4 G946-4 5 - 45.52 *6 x 6 G1209 8 - 65.17 *6 x 6 G946 4 - 57.44 8 x 8 L12008 1 - 159.34 *8 x 8 G948 4 - 125.13 10 x 10 L12010 1 - 264.52 10 x 10 L9410 1 - 213.83 12 x 12 L12012 1 - 374.06 12 x 12 L9412 1 - 314.79 Temporary Plug Polyethylene (S) Vertical Riser Adapter SxS *4 G1184 36 - 7.26 *4 x 4 G984 9 - 36.31 *6 G1186 40 - 10.76 *6 x 6 G986 4 - 64.27 *8 G1188 8 - 25.54 *8 x 8 G988 4 - 140.89 In-Line Backwater Valve GxG Terminal Backwater Valve (G) †4 L0104 1 - 210.45 4 L0204 1 - 179.85 †6 L0106 1 - 454.48 6 L0206 1 - 271.40 8 L0108 1 - 1,492.54 8 L0208 1 - 429.01 10 L0110 1 - 1,879.96 10 L0210 1 - 496.26 12 L0112 1 - 2,512.34 12 L0212 1 - 537.95 IntelliCap with 3M Marker IntelliDisc with 3M Marker *4 P1614-SN 14 - 69.00 *4 P1624-SN 20 - 57.50 *6 P1616-SN 10 - 86.25 *6 P1626-SN 10 - 71.88 Stainless Steel Clamp (QuickLock) Locator for 3M Marker 6 P5128 1 - 13.95 - P1634 1 - POR 8 P5188 1 - 19.21 Skirt Gasket for Saddle Tee Skirt Gasket for Saddle Wye 4” Inlet G5004 6 - 13.70 4” Inlet G5054 6 - 15.30 6” Inlet G5006 4 - 17.95 6” Inlet G5056 4 - 20.55 *Denotes Molded Fitting Third party tested and listed by CSA, NSF and UPC






Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Item Size in Inches

Part Number

Box Qty

Crate Qty

List Price

Saddle Tee with Stainless Steel Clamps Saddle Wye with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet Short Gasket Skirt x Gasket Inlet *6 x 4 G2106-4 5 - 60.59 *6 x 4 G2306-4 6 - 54.17 *8 x 4 G2108-4 6 - 76.18 *8 x 4 G2308-4 6 - 76.18 *8 x 6 G2108-6 3 - 87.18 *8 x 6 G2308-6 4 - 78.74 *10 x 4 G2110-4 5 - 134.62 *10 x 4 G2310-4 6 - 151.01 *10 x 6 G2110-6 6 - 160.67 *10 x 6 G2310-6 4 - 162.02 *12 x 4 G2112-4 5 - 166.98 *12 x 4 G2312-4 5 - 168.22 *12 x 6 G2112-6 4 - 187.71 *12 x 6 G2312-6 4 - 188.99 *15 x 4 G2115-4 5 - 176.49 *15 x 4 G2315-4 5 - 177.28 *15 x 6 G2115-6 4 - 189.31 *15 x 6 G2315-6 4 - 195.39 *18 x 4 G2118-4 5 - 311.11 *18 x 4 G2318-4 6 - 316.16 *18 x 6 G2118-6 3 - 342.76 *18 x 6 G2318-6 2 - 344.70 Saddle Tee with Stainless Steel Clamps Saddle Wye with Stainless Steel Clamps Extended Solvent Skirt x Gasket Inlet Extended Solvent Skirt x Gasket Inlet 6 x 4 L2106-4 1 - 48.48 6 x 4 L2306-4 1 - 43.53 8 x 4 L2108-4 4 - 60.90 8 x 4 L2308-4 1 - 60.90 8 x 6 L2108-6 3 - 69.75 8 x 6 L2308-6 2 - 63.01 10 x 4 L2110-4 1 - 107.66 10 x 4 L2310-4 3 - 120.77 10 x 6 L2110-6 4 - 128.55 10 x 6 L2310-6 1 - 129.61 10 x 8 L2110-8 1 - 215.67 10 x 8 L2310-8 1 - 281.67 12 x 4 L2112-4 3 - 133.55 12 x 4 L2312-4 1 - 134.60 12 x 6 L2112-6 2 - 150.17 12 x 6 L2312-6 4 - 151.17 12 x 8 L2112-8 1 - 248.89 12 x 8 L2312-8 1 - 396.67 12 x 10 L2112-10 1 - 313.32 12 x 10 L2312-10 1 - 476.45 15 x 4 L2115-4 1 - 141.19 15 x 4 L2315-4 1 - 141.84 15 x 6 L2115-6 1 - 151.40 15 x 6 L2315-6 1 - 156.30 15 x 8 L2115-8 1 - 297.37 15 x 8 L2315-8 1 - 483.97 15 x 10 L2115-10 1 - 336.25 15 x 10 L2315-10 1 - 546.69 15 x 12 L2115-12 1 - 503.36 15 x 12 L2315-12 1 - 667.07 18 x 4 L2118-4 1 - 248.89 18 x 4 L2318-4 1 - 252.92 18 x 6 L2118-6 1 - 274.19 18 x 6 L2318-6 1 - 275.78 18 x 8 L2118-8 1 - 354.87 18 x 8 L2318-8 1 - 541.45 18 x 10 L2118-10 1 - 393.75 18 x 10 L2318-10 1 - 604.18 18 x 12 L2118-12 1 - 562.89 18 x 12 L2318-12 1 - 724.66 18 x 15 L2118-15 1 - 614.50 18 x 15 L2318-15 1 - 778.23 21 x 4 L2121-4 1 - 259.04 21 x 4 L2321-4 1 - 262.64 21 x 6 L2121-6 1 - 285.17 21 x 6 L2321-6 1 - 286.81 21 x 8 L2121-8 1 - 369.06 21 x 8 L2321-8 1 - 563.11 21 x 10 L2121-10 1 - 409.50 21 x 10 L2321-10 1 - 628.35 21 x 12 L2121-12 1 - 585.41 21 x 12 L2321-12 1 - 753.65 21 x 15 L2121-15 1 - 639.08 21 x 15 L2321-15 1 - 809.36 21 x 18 L2121-18 1 - 912.56 21 x 18 L2321-18 1 - 976.44 24 x 4 L2124-4 1 - 269.40 24 x 4 L2324-4 1 - 273.15 24 x 6 L2124-6 1 - 296.57 24 x 6 L2324-6 1 - 298.28 24 x 8 L2124-8 1 - 383.82 24 x 8 L2324-8 1 - 585.63 24 x 10 L2124-10 1 - 425.88 24 x 10 L2324-10 1 - 653.48 24 x 12 L2124-12 1 - 608.82 24 x 12 L2324-12 1 - 783.80 24 x 15 L2124-15 1 - 664.64 24 x 15 L2324-15 1 - 841.73 24 x 18 L2124-18 1 - 958.79 24 x 18 L2324-18 1 - 1,015.50 24 x 21 L2124-21 1 - 1,079.34 24 x 21 L2324-21 1 - 1,154.89 27 x 4 L2127-4 1 - 282.87 27 x 4 L2327-4 1 - 286.81 27 x 6 L2127-6 1 - 311.41 27 x 6 L2327-6 1 - 313.19 27 x 8 L2127-8 1 - 403.02 27 x 8 L2327-8 1 - 614.91 27 x 10 L2127-10 1 - 447.17 27 x 10 L2327-10 1 - 686.15 27 x 12 L2127-12 1 - 639.26 27 x 12 L2327-12 1 - 822.99 27 x 15 L2127-15 1 - 697.88 27 x 15 L2327-15 1 - 883.82 27 x 18 L2127-18 1 - 1,006.73 27 x 18 L2327-18 1 - 1,066.28 27 x 21 L2127-21 1 - 1,133.31 27 x 21 L2327-21 1 - 1,201.09 27 x 24 L2127-24 1 - 1,332.92 27 x 24 L2327-24 1 - 1,381.25 30 x 4 L2130-4 1 - 351.16 30 x 4 L2330-4 1 - 359.94 30 x 6 L2130-6 1 - 377.95 30 x 6 L2330-6 1 - 387.99 Skirt Gasket included with 4” and 6” inlets Skirt Gasket included with 4” and 6” inlets

Reducing Tee and Reducing T-Y Vertical Riser Kits Reducing 45 Degree Wye Vertical Riser Kit Reducing Tee Kits Reducing 45 Degree Wye Kits 8 x 4 HDB108-4 - - 478.10 8 x 4 HDB308-4 - - 510.99 8 x 6 HDB108-6 - - 618.51 8 x 6 HDB308-6 - - 670.51 Reducing T-Y Kits 8 x 4 HDB158-4 - - 485.53 8 x 6 HDB158-6 - - 631.58 Complete job-site ready Vertical Riser Kits include every Complete job-site ready Vertical Riser Kits include every fitting needed from sewer main to lateral connection, all fitting needed from sewer main to lateral connection, all conveniently packaged and ready for installation. conveniently packaged and ready for installation.

*Denotes Molded Fitting Items in Bold feature Heavy Duty Branches (SDR18) Third party tested and listed by CSA, NSF and UPC Page G10 †Denotes Assembled from Molded Components Specifications: ASTM D3034, F1336, CSA B182.2

Additional Sizes Available Upon Request Non-Stock items are non-cancelable, non-returnable



Stan Roberts & Associates, Inc Houston - 800-392-6583 • Dallas - 800-462-1195

sti™ gasketed sewer fittings sdr 35 injection molded in ... · pdf filesti™...

Documents