solutions for repairing different kinds of · pdf filesolutions for repairing different kinds...
TRANSCRIPT
SOLUTIONS FOR REPAIRING DIFFERENT KINDS OF BELTS
Rip Repair*
*MADE IN FRA
NC
E
Fasteners and splice
What is it ?RIP REPAIR FASTENERS
Battery, electric or pneumatic operated drill or screwdriver
MLT has developed the SUPER-SCREW®. It is a flexible rubber splice to screw onto the belt.MLT specific screws are self-drilling and self-tapping : they spread the carcass threads without cutting them.The screwing process allows Super-Screw® to be installed regardless of the :- configuration of the conveyor belt,- access conditions,- weather conditions,- temperature (-50 up to 200°C flash).
Repair on ST belt Patch on textile belt
Patch on textile belt
Super-Screw® can be an permanent splice, ask your distributor
PAtCH and repairSuper-Screw®
*
*M A
D E I N F R A N C
E
P A T E N T E D
AdvantagesInstallation without need of physical strength -
Quick installation (saves downtime) - Under any weather conditions -
Using battery or pneumatic operated screw driver - No need of electricity power -
No use/need of expensive equipment -No need of highly skilled operator -
- No drilling preparation, no template- Self tapping screws through the belt- Wear and cut resistant- Suitable for high-heat belt up to 200°C- Compatible with conveyor scraper- Leak proof- Many rubber qualities available
Advantages
SUPER-SCREW® 35 63 65 80 85 100 105 125 127 180 185 200 205
Final belt thickness*, mm 4-11 4-13 4-13 4-15 5-15 6-15 6-15 7-20.5 7-19 7-20.5 7-19 7-19 7-17.5
Thickness top plate (± 1 mm), mm 4.5 5 6.5 6 7.5 7.5 9 6.5 8.5 6.5 8.5 8.5 10
Thickness bottom plate (± 1 mm), mm 3.7 4 4 4.5 4.5 4.5 4.5 6 6 6 6 6 6
* Final belt thickness : Belt thickness once skived or not
Bolt plate fasteners allow for simple and easy fixing, joining or repairing of the conveyor belt.
bolt plate fasteners
Advantages- Easy to install- Fast to install- No costly installation tools necessary
1 140 190 1 1/2 2 2 1/2
Belt thickness, mm 5 - 11 5 - 12 8 - 14 11 - 17 16 - 21 19 - 25
Fastener Carbon steel or wear resistant carbon steel
Packaging Box of 10 or 25 fasteners (depending on type)Bucket of 100 fasteners (depending on type)
Installation tool Manual installation tool
6 points fasteners allow easy fixing onto the conveyor belt. The tips of the fastener are very sharp. It can be used for conveyor belt rip or pulling the belts onto the conveyor.
6 points fasteners
Advantages- Easy to install- Fast to install- No costly installation tools necessary- Perfect for pulling belt
1 2 3 4 5 6 7
Belt thickness, mm 4 - 6 6 - 8 8 - 10 10 - 13 13 - 16 16 - 19 19 - 22
Fastener Coated steel+ stainless steel for N°5
Packaging Box of 100 fasteners
Installation tool Hammer
Multipoint fasteners allow to easily repair convyeor belt rips or tears.It can be used for conveyor belt rips or pulling on belts to the conveyor
multipoints fasteners
110 112 113 114 115 117
Belt thickness, mm 3 - 4 6 - 8 8 - 9.5 9.5 - 11 11 - 14.5 14.5 - 17
Fastener Coated steel
Packaging Box containing 2000 mm splice
Installation tool Hammer
VERYsharp
Advantages- Easy to install- Fast to install- No costly installation tools necessary- Perfect for pulling belt
6 points
Super-Screw® splice
Super-Screw® splice
.
ISC® splice
**MADE IN FRANCE
Quality productsSimplified work
Super-Screw® patchSuper-Screw® splice
New
www.mlt-lacing.com
www.mlt-lacing.com
DISTRIBUTOR
Technical beltsSuper-Screw®
Self-Lock®
MS®
More information ?
Truly endless spliceless belts
Phone: 04 99 99 [email protected]
Bayswater WA 6053
Documentation sur internetFabrication rapideR&D
In stock
Brochures on internet
Training Assistance
Quick supplyEfficientR&D
Standard products availablein stock
Technicaladvice
Distributed By Evolved Mining Solutions
MR
New Clip’N Lock®
Mine fastenerNew
6 points
MLT also produces conveyor belt splicing systems, technical belts, tools, vulcanizing presses...
The technical content of this document is for information purposes only and may be modified without notice.
© M
LT F
R - D
P R
R - 0
7 -1
5 (E
NG
)