solution paper open cloud infrastructure_en.pdf

Fujitsu, Brocade & NetApp Solution Paper

Technology Verification

Building an Open Dynamic Cloud Infrastructure

Learn how to integrate best-in-class storage and network products when building an

Open Dynamic Cloud Infrastructure for your Data Center

Fujitsu, Brocade and NetApp Solution Paper Technology Verification

Open Cloud Architecture 2 of 25

CONTENTS Contents .............................................................................................................................................................................................................................................. 2

Introduction ........................................................................................................................................................................................................................................ 3

Architecture ....................................................................................................................................................................................................................................... 4

Principle Design ..................................................................................................................................................5

Fujitsu Configuration .........................................................................................................................................6

Traditional FC SAN alternative ........................................................................................................................7

Management infrastructure for both configurations .................................................................................8

Management Software .......................................................................................................................................8

Product Introductions ..................................................................................................................................................................................................................... 9

NetApp FAS System Storage Series ..............................................................................................................9

Brocade 8000 top-of-rack DCB/FCoE switch ............................................................................................ 10

Brocade MLX Series ........................................................................................................................................ 11

Fujitsu PRIMERGY RX Platform ................................................................................................................... 11

Fujitsu PRIMERGY CX Cloud eXtension Platform ................................................................................... 12

Best Practices ................................................................................................................................................................................................................................. 13

Appendix A - Configuration of CNA for Boot over SAN ...................................................................................................................................................... 14

Appendix B - Fabric Discovery of Boot LUN ........................................................................................................................................................................... 19

Appendix C - Switch Zoning Configuration Example ......................................................................................................................................................... 20

Appendix D - Switch Configuration Example ........................................................................................................................................................................ 21



INTRODUCTION This paper discusses a cloud architecture’s capabilities for meeting today’s business demands for IT agility and illustrates the foundation for a highly mobile and dynamic hypervisor-agnostic computing infrastructure built with best-of-breed products from Fujitsu, NetApp, and Brocade. The intended audience is network architects interested in virtualization and cloud architecture. The goal of this paper is to provide the reader insight to considerations that should be made when constructing a cloud infrastructure. The architectural design in this paper should not be construed as a fully tested, qualified and supported configuration. Rather it is simply as an example of what can be built. To implement such an infrastructure, please consult with your local Fujitsu, NetApp and Brocade representatives. Here is a content outline: An introduction to the cloud computing and data center virtualization concepts and design

considerations Overview of the architectures tested

o Technology elements o Designs

Product overviews Best practices Appendices

o Design and configuration notes

Executive Summary Cloud computing developed from the widespread adoption of virtualization, service-oriented architecture, and autonomic and utility computing. It reduces the number of standardized products, technologies, and platforms of the underlying IT infrastructure resources. This standardization promotes consistency and reduces operational complexity. Cloud computing also encourages IT to develop a catalog of standard services on which to build business capabilities. Some cloud computing features are: • Virtual infrastructure to provide resources. Virtualization technology enables the data center itself to become a dynamic pool of resources. Applications and data are not constrained to a specific physical server or a single storage device. Operations ensure that adequate resources are available while service provisioning handles the resources allocated to an application or user.

• Service provisioning. Services must be provisioned with little or no effort on the part of the IT group responsible for maintaining the resource pools. Users are able to use self-service portals to request and obtain computing, storage, and network connectivity within minutes. This is a significant departure from the earlier IT model of project-based application deployment from dedicated hardware.

• Payment at time of use. Cloud computing supports many innovative financial models, such as pay-as-you-go, and even a no-cost model for some public cloud applications in which advertising pays for the infrastructure. To build a platform that enable cloud services, companies need to identify the infrastructure components that can be integrated into a unified platform. This platform must include server, storage, and networking components which support applications and cloud services.



In a virtualized data center, every aspect of a piece of hardware is abstracted from every other piece of hardware. Moving data from one array to another, moving applications from one server to another, moving network services from one switch to another—essentially all add, move, or change operations—could be conducted without disrupting applications or users, It is possible to build an abstraction layer that covers the entire data center itself. Brocade, Fujitsu, and NetApp have packaged this architecture into a basic infrastructure to enable scalability in order to meet growing business needs, instead of building upon a project-by-project basis. Together they have built a family of solutions that showcase a cloud-capable infrastructure that is flexible and scalable. The architecture has been validated to enable:

Convergence (multiple protocols running concurrently)

Hypervisor-agnostic infrastructure o Integration with VMWare o Integration with Microsoft

Multi-tenancy

Virtual Machine mobility Fujitsu, NetApp, and Brocade are continuing to develop solutions and will be looking to support complete integrated bundles for sale in the coming months.

ARCHITECTURE The infrastructure architecture consists of:

Fujitsu PRIMERGY CX1000 and PRIMERGY RX200 for the server platforms in both configurations

o The CX1000 is supported by CX120 mainboard equipped with Brocade 1020 dual port CNAs

Brocade 8000 Switch as top-of-rack 10 Gigabit Ethernet (GbE) DCB switch and as a potential bridge into Fibre Channel (FC) SAN

Brocade MLX and MLX-4 chassis as aggregation level/core switch

NetApp FAS 3140A storage arrays with UTA (Universal Target Adapters)

Other optional equipment available:

Fujitsu ETERNUS FC storage as alternative to the NetApp storage

Brocade 300 FC SAN switch

Brocade FWS 624 IP switch

Brocade FCX-S 648 IP switch

Other Fujitsu, Brocade, and NetApp management products

Key technology elements VMware’s remote hypervisor boot was used for this architecture because it provides excellent virtual switch management and integration into NetApp and Brocade network management. VMware is currently the market leader and has been showcased in other cloud scenarios. This solution also runs Microsoft’s Hyper-V in parallel, as it utilizes the strengths of both industry leaders’ virtualization products.



Principle Design

As seen with the above components, the fundamental structure is defined by the 24-port Brocade 8000 Fibre Channel over Ethernet (FCoE) switch. This leads to basic building blocks of 16 to 20 servers at the minimum, which are connected to two Brocade 8000 switches that provide redundant connection to each server. At the north side of the Brocade 8000, Ethernet and Fibre Channel (FC) traffic are split and forwarded to 10 GbE LAN and 8 GB FC SAN switches. This architecture is extremely scalable as most of these building blocks can be connected to appropriate LAN and SAN switches without adding management complexity. As an alternative, an end-user can utilize NetApp’s storage arrays with their UTA (Universal Target Adapter) allowing direct connection to FCoE. In smaller configurations, this enables the possibility of omitting the entire FC network.

These two architectures were developed and tested, one at Fujitsu and one at Brocade, each with a different focus by using different server nodes and network oversubscription. The architecture built at Fujitsu was focused on efficiency in every respect to optimize the data center density, power consumption, and heat dissipation problems. By using the Fujitsu PRIMERGY CX1000, the design uses a one-step approach to conserve space, energy, and cost. The architecture built at Brocade capitalizes on higher performance and higher throughput through less oversubscription. This



architecture utilizes Fujitsu PRIMERGY RX200 server nodes and is easy to install for new customers or evaluation purposes at existing customers. Flexible with the number of required nodes, it can be less expensive compared to a standard complete PRIMERGY CX1000 configuration.

Fujitsu Configuration This configuration is based on the Fujitsu PRIMEGY CX1000 cloud server hardware. The 38 servers are divided into two groups: the upper 19 servers which are connected to the upper two Brocade 8000 switches and the lower 19 servers which are connected to the lower two Brocade 8000 switches. The following graphic illustrates the customer network and the management network will be illustrated later in this paper. The NetApp FAS3140A is directly connected through FCoE by two ports to each of the four Brocade 8000 switches. With an emphasis on efficiency, there is only a three port LAG connecting the Brocade 8000 switch to the MLX switch. The FAS 3140A array is connected to each Brocade 8000 switch through two ports.

Brocade Configuration This configuration is based on Fujitsu PRIMERGY RX200 rack servers and focuses on IO performance and throughput configured with an oversubscription of 2:1. An additional benefit of this design is oversubscription flexibility to meet an end user’s specific requirements. The following graphic illustrates the customer data network and the management network will be illustrated later in this paper. The NetApp FAS3140A is directly connected through FCoE by two ports to each of the two Brocade 8000 switches through FCoE. A 4-port LAG connects the Brocade 8000 to the MLX-4 switch. The FAS 3140A array is connected to each Brocade 8000 switch through two ports.



Traditional FC SAN alternative An alternative to the NetApp storage connected with FCoE, is the Fujitsu ETERNUS storage system. The Brocade 8000 switch additionally provides eight FC ports which can connect storage to the PRIMERGY CX1000 rack. The ETERNUS FC storage is connected through a Brocade 300 switch to the FC ports on the Brocade 8000 switches.



Management infrastructure for both configurations A separate management LAN was used for testing.

A Brocade FWS switch is the core of the management network. The central management station hosting all the management software is connected to it, as well as the dedicated (out-of-band) management ports of nearly all the other components (except FCX-S). This enables the administrator to manage the infrastructure entirely independently of the customer production network. Each server node’s BMC (Baseboard Management Controller) is connected to the first onboard NIC (LoM) which is connected to a FCX switches working as ToR management switch. This in-rack 1 GbE management network provides both BMC-based out-of-band server HW management (like power-on/off) and OS or hypervisor management (e.g. VMotion).

Management Software The Brocade FWS ran a DHCP server to provide IP configurations (within the management network only) especially to the larger number of server nodes. The Central Management Station (CMS) is a PRIMERGY RX200 with at least 16 GB of memory and a local disc to host the ServerView Deployment and Operations Manager, which installs and operates the servers. The Brocade DCFM network management software administers all switch components. VCenter manages the VMware Hypervisors and VMs on the server nodes. As long as there is only one NetApp FAS Array in the infrastructure, the NetApp Operations Manager is not required. A single array is managed by the FAS-built-in ONTAP management SW. For larger installations, the NetApp OM would also be installed on the CMS.



PRODUCT INTRODUCTIONS

NetApp FAS System Storage Series Unified Storage Architecture Enterprises are looking for cost-effective ways to simplify and unify storage infrastructure across both storage protocols and storage tiers. Their goals include:

Improving service levels

Reducing redundancy costs and minimizing the number of point solutions

Moving toward an end-to-end data protection plan (backup and recovery, data recovery, archiving) with a single management interface

Implementing a recovery-centric approach to storage that minimizes downtime after an outage

Providing a multisite infrastructure that protects as many applications as possible (made possible by cheaper network bandwidth)

Delegating more functions to application and system administrators (This requires a common storage area coupled with policy-based tools)

In addition to being able to run multiple storage protocols on the same system, speed and simplicity are crucial, as well as how broadly those management capabilities can be leveraged.

Single provisioning interface. A single interface is required to effectively pool storage, creating one model for defining data containers that can be allocated and dynamically managed (sized and resized) for use by a wide range of applications, whether they need block (SAN) or file (NAS) access.

Common management framework. A single data model and toolset enables consistency a consistent management framework across many applications and workloads. A set of common management services creates a hierarchy of value, from physical storage management of to application-level integration.

Policy-based automation. Both a single provisioning interface and a common management framework are required in order to enables policy-based automation through which storage administrators may delegate some or all of the responsibility for provisioning and management tasks. This extends a single toolset across the organization, enabling system administrators, application administrators, DBAs, and others to quickly accomplish storage tasks without storage administrator involvement.

Shared data protection at the storage level. A single data protection architecture encompasses everything from a single file to full disaster recovery—all based on the same

foundation. Starting with Snapshot® copy technology, NetApp has built a consistent set of

tools that leverage that underlying capability, extending its use for a wide range of applications both in the data center and in remote offices. The result is near-instant data recovery and the ability to extend a consistent set of data protection tools to files, LUNs, databases, and applications.

Ability to incorporate other third-party storage. Almost every existing data center has substantial investments in storage from a variety of vendors. Using NetApp V-Series can extend many of the advantages of unified storage to existing third-party storage; for example, from Fujitsu, EMC, HP, HDS, IBM and others. It is even possible to set up mixed environments.

All NetApp FAS Systems (as well as NetApp V-Series) run one common operating system: Data ONTAP®. With the NetApp FAS product line, mission-critical data can be consolidated across a company enterprise, regardless of existing size or number of storage platforms. After it is consolidated, it will also be more efficiently protected and recoverable. With NetApp Data



ONTAP® software, an expanded set of applications can be supported through dynamic virtualizing storage throughout the existing Fibre Channel SAN infrastructure. Entire blocks are unified and storage networking paradigms are filed under a common architecture. This solution also includes a complete suite of advanced tools to manage consolidated data. The NetApp FAS systems are scalable and contain many terabytes of managed capacity with industry-leading performance. Systems can be configured for simultaneous active-active access with secure failover across two independent controllers in a storage system. Using a single data management architecture reduces complexity and improves efficiency. Brocade 8000 top-of-rack DCB/FCoE switch The Brocade 8000 enables access to LAN and SAN environments over a common server connection by utilizing Data Center Bridging (DCB) and FCoE protocols. LAN traffic is forwarded to aggregation layer Ethernet switches using conventional 10 GbE connections, and storage traffic is forwarded to FC SANs over 8 Gbps FC connections. Part of a unified DCB/FCoE solution unique to Brocade, the Brocade 8000 helps organizations reduce their capital and operating expenses in enterprise data centers. The Brocade 8000 provides best-in-class performance using a cut-through, non-blocking architecture. The low-profile 1U design features twenty-four 10 Gbps DCB ports for server and LAN connections, and eight 8 Gbps Fibre Channel ports for SAN connectivity.

The advanced ASIC technology of the Brocade 8000 provides unique frame-based trunking of server connections at up to 40 Gbps of combined throughput. The switch also features standards-based Link Aggregation Control Protocol (LACP) for LAN connections, as well as frame-based trunking of SAN connections at up to 64 Gbps of throughput. To meet current and future needs, organizations have the flexibility of activating both the DCB ports and Fibre Channel ports, with full FCoE support enabled. Alternatively, they can initially deploy the Brocade 8000 as a 10 GbE Layer 2 Ethernet switch and activate only the DCB ports. For SAN connectivity in the future, they can add optional licenses to activate the Fibre Channel ports and FCoE capabilities, providing a seamless path to server I/O consolidation. Brocade has also released a new generation of 10 GbE DCB switch, Brocade VDX 6720, which would also be capable of being used in this configuration. At the heart of Brocade VDX 6720 switches is Brocade Virtual Cluster Switching (VCS™), a new Ethernet fabric technology that addresses the unique requirements of evolving data center environments. Customers will be able to seamlessly transition their existing multitier hierarchical networks to a much simpler, virtualized, and converged data center network—moving at their own pace. Brocade VDX 6720 Data Center Switches are specifically designed to improve network utilization, maximize application availability, increase scalability, and dramatically simplify network architecture in virtualized data centers. By leveraging Brocade VCS technology, the Brocade VDX builds data center Ethernet fabrics—revolutionizing the design of Layer 2 networks and providing an intelligent foundation for cloud computing. Brocade dual port CNA (Converged Network Adapter) The CNA supports full Fibre Channel over Ethernet (FCoE) protocol offload and allows Ethernet and storage traffic to run simultaneously over a converged link. Advanced capabilities such as support for Jumbo frames, VLAN tagging, TCP Segmentation Offload (TSO) and Large Send Offload (LSO) is also beneficial in iSCSI

storage environments. By offering a single adapter to replace the dedicated Fibre Channel Host Bus Adapters (HBAs) and Ethernet NICs in a data center server, the Brocade 1010/1020 CNAs reduce both capital and operational expenses—while simplifying management through Brocade Network Advisor.

The Brocade 1010 and 1020 CNAs provide the industry’s highest levels of IOPS per port: up to 500,000

with less than 2usec in latency. In addition to that, these CNAs provide the industry’s highest sustained



FCoE throughput performance, making them ideal for highly demanding storage and transaction-intensive applications. In addition, they draw low amounts of energy, helping to keep servers running efficiently.

Brocade CNAs support open industry standards such as T11 FCoE, FIP, and IEEE Data Center Bridging (DCB) capabilities, including Priority-based Flow Control (PFC 802.1Qbb) and Enhanced Transmission Selection (ETS 802.1Qaz). As a result, they are designed to provide a smooth transition of DCB/FCoE into any existing data center infrastructures. Brocade MLX Series The Brocade MLX Series of advanced routers delivers unprecedented scale and performance, high reliability, and cost-saving operational efficiency for the world’s most demanding service provider and enterprise networks. Brocade MLX Series routers feature industry-leading 100 GbE, 10 GbE, and 1 GbE wire-speed density; rich IPv4, IPv6, Multi-VRF, MPLS, and Carrier Ethernet capabilities without compromising performance; and advanced Layer 2 switching. Designed for non-stop networking, the Brocade MLX Series features Multi-Chassis Trunking (MCT), which provides more than 30 Tbps of dual-chassis bandwidth, full active/active routing links, and uninterrupted traffic flow in the event of node failover. Organizations can achieve high resiliency through fully redundant switch fabrics, management modules, power supplies, and cooling systems.

Fujitsu PRIMERGY RX Platform PRIMERGY RX servers are tried-and-tested data center technology that can cut data center infrastructure costs through greater transparency in structures and administration overhead and maximum leveraging of investments. Extensive remote management with the PRIMERGY ServerView Suite enables flexible, low-cost management anytime, anywhere. Cost-effective scaling, simplified operations, and enhanced IT operation are the primary advantages of a rack infrastructure. For investment protection in data centers, the modular PRIMERGY rack supports seamless integration of PRIMERGY servers, SAN, NAS storage subsystems and infrastructure components such as hubs and KVM switches. Our supply model and build-to-order process ensure that only completely configured and tested solutions are shipped, speeding up implementation. The energy efficiency of the server systems has been configured with a family design concept to meet high standards across all models of the PRIMERGY RX server portfolio. The major elements of the Cool-safe™ design concept include: - Honeycomb design for improved air intake - Cable-less design for uninterrupted airflow through the system - Highly-efficient PSUs with up to 92 percent efficiency - Large fans that run at lower speed for reduced noise levels and higher efficiency - Comprehensive server power management features - Airflow channels which direct the airflow directly to potential hotspots like CPUs or PSUs

The family design concept also promotes the easy handling and maintenance of the PRIMERGY RX rack server systems with:

- Touch points for usability and maintenance - Light path and customer self service elements to simplify maintenance and decrease

maintenance cost



Fujitsu PRIMERGY CX Cloud eXtension Platform The PRIMERGY CX1000 is a new, innovative scale-out cloud server infrastructure platform that is built to support Internet scale-out data centers, managed domains, “as-a-service” providers, hosting industries, cloud computing, and HPC markets. The PRIMERGY CX1000 simultaneously solves the four biggest challenges for large organizations’ cloud, hosting or HPC data center strategies:

It provides large data centers with massive scalability by packaging thirty-eight industry-standard x86 server nodes into a dedicated data center rack unit.

With its ability to simultaneously optimize the data center density, power consumption, and heat dissipation, it is highly advantageous for large enterprises and their cloud, hosting or HPC data center strategies.

With shared cooling architecture and a low environmental footprint, it delivers new economics for density, power, heat and acquisition costs.

There are up to five bays available in the CX1000 chassis for IP network switches. The recommended Ethernet switch is the Brocade FCX648G switch, which fully complies with the CX1000 specifications (1 U switch, max depth <= 650 mm, front-to-back-cooling,).

PRIMERGY CX1000 is a new Product Category within the PRIMERGY server family. Its focus is on providing large data centers with massive scaling x86 server power while at the same time delivering new economics for density, power, heat and acquisition costs. The PRIMERGY CX1000 is a solution to deliver a cloud- enabled server infrastructure platform, targeting Internet scale-out data centers, Managed Domains, “As- a-Service” providers , Hosting industries, Cloud computing and also HPC markets. The CX1000 platform is designed to exactly solve the 4 dimensions problem to deliver new cloud data center economics: PRIMERGY CX1000 is an innovative Scale-Out Cloud server infrastructure platform that simultaneously solves the 4 biggest challenges for large Enterprises and their Cloud, Hosting or HPC datacenter strategies: It enables to SCALE BIG by packaging 38 industry standard x86 server nodes that come without fans into a dedicated datacenter rack unit with shared cooling architecture and low footprint: the PRIMERGY CX1000 System. PRIMERGY CX1000 provides massive scale-out computing power and optimizes the datacenter DENSITY, POWER consumption and HEAT dissipation problems in an one step approach. Its innovative shared cooling solution “Cool-Central™” enables to build new economics into scale-out datacenters by minimizing energy consumption and datacenter space - removing the strong inhibitors for Cloud Datacenter setup. Up to 5 bays are available in the CX1000 chassis for IP Network switches. Recommended Ethernet switch is the Brocade FCV6482 switch, that fully complies with the CX1000 specifications (1 U switch, max depth <= 650 mm, front-to-back-cooling,).



BEST PRACTICES There are a number of best practices that should be implemented in order to successfully configure an open cloud infrastructure. Although cloud computing promises significant ROI, keeping complexity and cost to a minimum, organizations need to strategically assess the existing network architecture and identify specific goals. The architectures described in this report can be used as introductory platforms, for testing or initial deployments, or as higher-efficiency architecture that features performance without complexity. In either case, these architectures can be deployed and connected to existing infrastructure so as not to create isolated environments. Many other solutions feature a “rip and replace” deployment procedure in which the standalone infrastructure which may or may not be able to connect to existing infrastructure. This method typically requires much greater commitment and upfront costs. Network infrastructures are simplified through the greater use of virtualization, which in turn reduces the amount of required hardware. Typically, new skills and management training are required for cloud infrastructures. Without preparation, cloud infrastructures, regardless of size, will face a multitude of problems which can actually increase OpEx thus negating the assumed CapEx savings. By implementing an initial deployment, end users are not only able to validate the architecture against their existing infrastructure, but provide time for their IT resources to learn the management of said infrastructure prior to larger scaled deployments. A Hypervisor agnostic approach to a cloud infrastructure deployment is also recommended. There are currently two primary vendors, VMWare and Microsoft, which comprise two thirds of the market to date. In the solutions tested in this paper, VMWare and Microsoft were used to confirm that the platform is compatible with both in a shared infrastructure. There are a number of other vendors that make up the remaining third and it should be assumed that any given infrastructure would likely require two or more vendor products to meet the business needs of the applications being deployed.



Appendix A - Configuration of CNA for Boot over SAN

Boot from SAN is becoming more popular in data centers. The most important reasons are rapid server provisioning,

rapid recovery from server failure, improved reliability, and reduced power and cooling.. This process was

enabled for the configurations described in this paper and to the following steps were documented for

administrative training purposes.

1. During server booting up, press CTL-B combination keys.

2. From Brocade BIOS Config Menu, select a CNA port.

3. Select Adapter setting.



4. Enable BIOS and Boot LUN = First LUN. The option Boot LUN = Fabric Discovered will require additional configuration (see Appendix).

5. Press ESC key to go back Adapter Configuration screen. Select Boot Device Settingc



6. Remote LUNs will show up. Select a LUN as boot and press Enter.

7. Select the boot target on the next screen.



8. After the Brocade BIOS config, during system reboot, press CTL-B to get in Brocade PXE BIOS menu.

9. Select an Adapter.



10. Enable the BIOS in the PXE menu.

11. Change the boot order under system BIOS menu. If the first LUN is new with no OS installed, it should be inserted first. When the system boots up, it will not boot from it and will instead go down the list to pick Brocade CNA. After an image is installed from the PXE server, the subsequent reboot will be from the remote LUN.



Appendix B - Fabric Discovery of Boot LUN

From a BCU cli, type the following to generate a zone command which is then applied to the sw8000. The new zone

will be add to the active configuration.

-p : Port WWN of the initiator.

-r : Port WWN of the target.

-l : LUN ID

C:\Program Files (x86)\Brocade\Adapter\driver\util>bcu boot --blunZone -c BLUN -

p 10:00:00:05:33:26:58:c4 -r 50:0a:09:84:89:1b:8f:2a -l 00

Please copy the following line and run this command from the switch command line to create the zone.

The zone name created below should be included in an effective cfg.

zonecreate "BFA_10000005332658C4_BLUN", "00:00:00:00:50:0a:09:84; 00:00:00:01:89

:1b:8f:2a; 00:00:00:02:00:00:00:00; 00:00:00:03:00:00:00:00"

C:\Program Files (x86)\Brocade\Adapter\driver\util>



Appendix C - Switch Zoning Configuration Example

swd77:root> cfgshow

Defined configuration:

cfg: A Z1; Z3; BFA_10000005332658C4_BLUN; Z4; Z5; Z6; Z7

zone: BFA_10000005332658C4_BLUN

00:00:00:00:50:0a:09:84; 00:00:00:01:89:1b:8f:2a;

00:00:00:02:00:00:00:00; 00:00:00:03:00:00:00:00

zone: Z1 FAS3140_1; host135

zone: Z2 FAS3140_1; npiv_mgmt1a; mgmt1a

zone: Z3 host136; FAS3140_1





alias: FAS3140_1

50:0a:09:84:89:1b:8f:2a

alias: host135 10:00:00:05:33:26:58:a4

alias: host136 10:00:00:05:33:26:58:c4

alias: host137 10:00:00:05:33:26:59:08; 10:00:00:05:33:26:59:09

alias: host138 10:00:00:05:33:26:59:3c

alias: host139 10:00:00:05:33:26:59:39

alias: host140 10:00:00:05:33:26:59:70

alias: mgmt1a 10:00:00:05:33:26:59:29

alias: npiv_mgmt1a

21:4d:00:0c:29:00:02:3b

Effective configuration:

cfg: A

zone: BFA_10000005332658C4_BLUN

00:00:00:00:50:0a:09:84

00:00:00:01:89:1b:8f:2a

00:00:00:02:00:00:00:00

00:00:00:03:00:00:00:00

zone: Z1 50:0a:09:84:89:1b:8f:2a

10:00:00:05:33:26:58:a4

zone: Z3 10:00:00:05:33:26:58:c4

50:0a:09:84:89:1b:8f:2a

zone: Z4 10:00:00:05:33:26:59:08

10:00:00:05:33:26:59:09

50:0a:09:84:89:1b:8f:2a

zone: Z5 10:00:00:05:33:26:59:3c

50:0a:09:84:89:1b:8f:2a

zone: Z6 10:00:00:05:33:26:59:70

50:0a:09:84:89:1b:8f:2a

zone: Z7 10:00:00:05:33:26:59:39

50:0a:09:84:89:1b:8f:2a

swd77:root>



Appendix D - Switch Configuration Example

swd77:root> cmsh

swd77#show run

!

protocol spanning-tree rstp

bridge-priority 61440

!

vlan classifier rule 1 proto fcoe encap ethv2

vlan classifier rule 2 proto fip encap ethv2

vlan classifier group 1 add rule 1

vlan classifier group 1 add rule 2

!

cee-map default

priority-group-table 1 weight 40 pfc

priority-group-table 2 weight 60

priority-table 2 2 2 1 2 2 2 2

!

interface Vlan 1

!

interface Vlan 5

fcf forward

!

interface Vlan 6

!

interface TenGigabitEthernet 0/0

description host140

switchport

switchport mode converged

switchport converged vlan 6

vlan classifier activate group 1 vlan 5

no shutdown

cee default

!


description host138

switchport




no shutdown

cee default

!


description host136

switchport




no shutdown

cee default



!


description host135

switchport




no shutdown

cee default

!


description host139

switchport




no shutdown

cee default

!


description host137

switchport




no shutdown

cee default

!


description mgmt server

switchport




no shutdown

cee default

!


shutdown

!


channel-group 1 mode on type standard

no shutdown

!



no shutdown

!



no shutdown

!





no shutdown

!


shutdown

!


shutdown

!


shutdown

!


shutdown

!


description fcoe target

switchport




no shutdown

cee default

!


description fcoe target

switchport




no shutdown

cee default

!


shutdown

!


shutdown

!


shutdown

!


shutdown

!


shutdown

!


shutdown

!

interface Port-channel 1

switchport



switchport mode trunk

switchport trunk allowed vlan add 6

no shutdown

!

protocol lldp

advertise dcbx-fcoe-app-tlv

advertise dcbx-fcoe-logical-link-tlv

!

line console 0

login

line vty 0 31

login

!

end

swd77#



© 2011 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, the B-wing symbol, BigIron, DCFM, DCX, Fabric OS, FastIron, IronView, NetIron, SAN Health, ServerIron, TurboIron, and Wingspan are

registered trademarks, and Brocade Assurance, Brocade NET Health, Brocade One, Extraordinary Networks, MyBrocade, VCX, and VDX are

trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names

mentioned are or may be trademarks or service marks of their respective owners. Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any

equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this

document at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may

not be currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the United States government.

© 2011 NetApp, Inc. All rights reserved. Specifications subject to change without notice.

NetApp, the NetApp logo, Go Further Faster, Bycast, ApplianceWatch, ASUP, AutoSupport, Campaign Express, ComplianceClock, Cryptainer,

CryptoShred, DataFabric , DataFort, Data Motion, Data ONTAP, Decru DataFort, FAServer, FilerView, FlexCache, FlexClone, FlexScale,

FlexShare, FlexVol, FPolicy, GetSuccessful, gFiler, Imagine Virtually Anything, Lifetime Key Management, LockVault, Manage ONTAP,

MetroCluster, MultiStore, NearStore, NetApp Data Motion, NetApp DataFort, NetApp Select, NetCache, Network Appliance, Network

Appliance logo, NOW (NetApp on the Web), ONTAPI, OpenKey, RAID-DP, SANscreen, SecureAdmin, SecureShare, Service Builder, Shadow

Tape, Simulate ONTAP, SnapCopy, SnapDirector, SnapDrive, SnapFilter, SnapLock, SnapManager, SnapMigrator, SnapMirror, SnapMover,

SnapRestore, Snapshot, SnapSuite, SnapValidator, SnapVault, StorageGRID, StoreVault, SyncMirror, Tech OnTap, vFiler, VFM, Virtual File

Manager, WAFL, and Web Filerare trademarks or registered trademarks of NetApp, Inc. in the U.S. and/or other countries. All other brands or products are trademarks or registered trademarks of their respective holders and should be treated as such.

© Copyright 2011 Fujitsu. All rights reserved. Fujitsu and the Fujitsu logo are registered trademarks. Statements herein are based on normal

operating conditions and are not intended to create any implied warranty of merchantability or fitness for a particular purpose. Fujitsu Computer

Products of America, Inc. reserves the right to modify at any time without notice these statements, our services, pricing, products, and their warranty

and performance specifications.

About Fujitsu

Fujitsu is a leading provider of ICT-based business solutions for the global marketplace. With approximately 170,000 employees supporting

customers in 70 countries, Fujitsu combines a worldwide corps of systems and services experts with highly reliable computing and communications

products and advanced microelectronics to deliver added value to customers. Headquartered in Tokyo, Fujitsu Limited (TSE:6702) reported

consolidated revenues of 4.6 trillion yen (US$50 billion) for the fiscal year ended March 31, 2010. For more information, please see: www.fujitsu.com

About Fujitsu Technology Solutions

Fujitsu Technology Solutions is the leading European IT infrastructure provider with a presence in all key markets in Europe, the Middle East and

Africa, plus India, serving large-, medium- and small-sized companies as well as consumers. With its Dynamic Infrastructures approach, the company

offers a full portfolio of IT products, solutions and services, ranging from clients to datacenter solutions, Managed Infrastructure and Infrastructure-

as-a-Service. Fujitsu Technology Solutions employs more than 13,000 people and is part of the global Fujitsu Group. For more information, please

see: ts.fujitsu.com/aboutus .

http://www.fujitsu.com/

http://ts.fujitsu.com/aboutus

solution paper open cloud infrastructure_en.pdf

Documents

fujitsu configuration

fujitsu primergy rx

management infrastructure

data center fujitsu

brocade mlx series

contents contents

class storage

configuration of cna