snow & ice system - phtruck.com · for the snow and ice market is an iqan-based...
TRANSCRIPT
Snow & Ice SystemParker ICS-567Integrated Control System for Class 5, 6 & 7 Trucks
Accurate, Uniform & FlexibleThe Parker ICS-567 is designed to fit the needs of your truck while delivering accurate and uniform material application.
Parker Hannifin’s Integrated Spreader Control System for the Snow and Ice Market is an IQAN-based electro-proportional hydraulic system, which offers compact electronic components for improved ergonomics coupled with our wide range of reliable hydraulic components.
The Parker ICS-567 Integrated Control System is designed to provide the operator with “hands free” material application. The operator simply sets the material rate and allows the controller to automatically make the necessary adjustments to maintain accurate, uniform material application, leaving the operator’s hands free to operate the vehicle.
Features & Benefits• Plug and play installation
• Fully electronic
• No calibration needed for J1939 ground speed input
• Zinc-plated Pulsar® Valve
• No valve enclosure necessary
• Automatic flow sharing ensures continuous operation, with manual option
• Ten positions, plus auger reverse
• Diagnostics and valve tuning can be done remotely via cell phone bluetooth
System Components• Integrated & Versatile Master Controller • IQAN XC23 input/output module • IQAN G11 Bluetooth® Technology • IQAN LC6 & LST Joysticks • Pre-programmed IQAN MC2 valve driver module• Complete Wiring Harness • Electro-proportional Pulsar® Hydraulic sectional valve
Zinc-Plated Pulsar® Valve
Total System ReliabilityComplete Parker system designed for quality, simplicity, and efficiency.
IQAN AMP connectorfor IQAN MC2
SPREADERPOWER
BLAST
REVERSEFEED HOIST
FLOAT
down
up
engaged
PTOdisengaged
auto
rightleft
up
down
SPINNER
FEED RATE
02 4 6
810
02 4 6
810
manualGRS PLOW CONTROL
IQAN MC2
Watertight Male/Female bulkhead connector
Pre-labeled Weather Pack solenoid connectors for Pulsar Valve
Holding valve connector
1
2
3
4
5
6 7
8
9
1011
1 Spreader power
2 Blast
3 Reverse feed
4 Spinner speed
5 Feed rate
6 Manual/auto ground speed
7 Proportional plow control
8 Float mode toggle
9 Float mode indicator light
10 PTO engage/disengage
11 Hoist up/down with neutral detent and manual release
Power for real time clock
J1939 ground speed
Analog ground speed(Ford Super Duty®)
Driver and Passenger Safety And In-Cab Control Design Features • Field of vision not compromised• Easy access to center console• Doesn’t block passenger airbag• Camera, USB & 12-volt outlet are accessible
Parker ICS-567: Part# MCE14751There are two mounting options for this system:
PMC-PEDESTAL-FLOOR (Used on all truck cabs with bucket seats and no center console)
HY19-ICS567 February 2018© 2018 Parker Hannifin Corporation, all rights reserved
Parker Hannifin Corporation8801 Wall Street, Suite 800Austin, TX 78754512-490-4560
Bluetooth TechnologyExperience the full advantage of the Parker ICS-567
The IQAN-G11 solution offers on-site, short range or remote diagnostic access to vehicles by wireless communication coupled together with IQAN software tools. Trouble-shooting and updating of application software, real-time measurement, and parameter adjustments can all be done wirelessly.
When connecting from a remote location this can shorten the diagnostics time and reduce travel costs for the initial diagnosis of a machine issue. If a repair is needed, the service technician will be better prepared with preliminary information and can bring all the necessary spare parts and tools needed to get the machine running quickly.
WirelessNetwork
Bluetooth
Parker Canada Division 160 Chisholm DriveMilton, ON CANADA L9T 3G9 +1 905-693-3000
Ordering Information
SPREADERPOWER
BLAST
REVERSEFEED HOIST
FLOAT
down
up
engaged
PTOdisengaged
auto
rightleft
up
down
SPINNER
FEED RATE
02 4 6
810
02 4 6
810
manualGRS PLOW CONTROL
Bluetooth
PMC-PEDESTAL-RAM (mounts on the Rammount #RAM-VB-185 bracket using the passenger seat hardware)
Bracket
Base plate soldseparately