sl order form jiffy drills - jean · pdf filejiffy® 2500 series legend lightning xt™...
TRANSCRIPT
Contacts Ext 221Ext 224Ext 244
Date:
Bill to: Ship to:
Tel: Tel:Fax: Fax:
Contact: Contact:E-mail:
Quantity
Equipped with Stealth STX™ Cutting Technology - Five Serrated Cutting Surfaces Performing a Smoother, Faster cutting surface. Black D-Ice'r ARMOR™ -
Prevents power-robbing ice build up for fast, clean performance form start to finish.
Description
Equipped with Stealth STX™ Cutting Technology - has the longest lasting blade life in the industry. Features
that professional fishermen demand!
Mitten Grip Recoil HandleIdeal for Initial Drilling and Redrilling of Ice Holes
See-through Fuel Tank.
New HTT Transmission - (High Torque Transmission), Heavy-duty clutch for fast, solid engagement and a
transfer of engine energy for additional torque.
Non-flood PrimerAvailable in 8", 9", and NOW 10" Drill Assemblies
Jiffy® 3500 Series Engine - The Ultimate in Power & Torque. This engine exceeds the performance of the
3HP of the 2008-2009 season.New E-Z Connect™
Dominick AsselinErin HoernerLouise Narbonne
Sealift Order Form - Jiffy Ice Drills
3075 Ste-Catherine eastMontreal, Qc, H1W 3X61-800-265-4845
Jiffy® 3500 Series STX PRO II™
Page 1
Quantity
Jiffy® 2500 Series Stealth STX™ powers your choice of 6", 8", or 9" Stealth STX™ drill assembly.
Jiffy® 2500 Series Stealth STX™
Black D-Ice'r ARMOR - Prevents power-robbing ice build up for fast, clean cutting performance from start to
finish.
Mitten Grip Recoil Handle
See-through Fuel Tank
HTT TRANSMISSION™ allows 30% more holes on a single battery charge.
NEW E-Z CONNECT™ Connection Collar - NO TOOLS REQUIRED to remove the drill assembly. Just slide the E-Z CONNECT™ down, pull the pin out, remove the drill
assembly.The LECTRIC™ STX PRO™ powers your choice of 6"
or 8" ice drill.Five Serrated Cutting Surfaces - Makes this the fastest
and smoothest cutting drill ever built
Lighter, Faster and More Powerful.Equipped with Stealth STX™ Cutting Technology - has the longest lasting blade life in the industry. Features
that professional fishermen demand.NEW HTT TRANSMISSION™ (High Torque
Transmission) with a heavy duty clutch for fast, solid engagements that transfers engine energy for additional
torque.Connects to any 12 volt wet cell battery, with deep cycle
batteries offering the best performance.
Description
Jiffy® LECTRIC™ STX PRO™
Jiffy® 2500 Series Engine - The Ultimate in Power. This engine exceeds the performance of the 2 HP from the
2008-2009 season.HST High Speed Transmission - This transmission is a
High Speed Drilling Performance only Jiffy can provide.NEW E-Z CONNECT™ Connection Collar - NO TOOLS
REQUIRED to remove Drill AssemblySTEALTH STX™ Cutting Technology - Serrated Ripper
Blade and Power Point Blades - last 2-3 times longer than any blade on the market, which give the owner 2-3
times more fishing time. Ideal for initial drilling and redrilling of ice holes.
Black D-Ice'r ARMOR™ - prevents power-robbing ice build-up for fast clean cutting performance.
Five Cutting Surfaces - makes this the fastest and smoothest cutting Jiffy drill ever built.
Non-flood Primer
Page 2
QuantityDescription
Jiffy® 3500 Series LEGEND XT™
Non-flood PrimerSee-through Fuel Tank
Available in 6", 8" and 9" XT Drill Assemblies.
Ripper Blade - Increase cutting performance by 15%. And last longer than Razor Style blades.
Ideal for Initial Drilling and Redrilling of Ice Holes.
Mitten Grip Recoil Handle
New Style Black Engine is without compromise, the ultimate in power and speed. Model 31 LEGEND XT™
features:Jiffy® 3500 Series Engine - The Ultimate in Power & Torque. This engine exceeds the performance of the
3HP of the 2008-2009 season.New E-Z Connect™
New HTT Transmission - (High Torque Transmission), Heavy-duty clutch for fast, solid engagement and a
transfer of engine energy for additional torque.Black D-Ice'r ARMOR™ - Prevents ice build up for faster, cleaner cutting and a powerful performance.Black Powder Coated Paint - Harder finish, more
durable and a Rich Black Finish.
NEW E-Z CONNECT™ Connection Collar - NO TOOLS REQUIRED to remove Drill Assembly
Ripper Blade - Increase cutting performance by 15%. And last longer than Razor Style blades.
Ideal for Initial Drilling and Redrilling of Ice Holes.Mitten Grip Recoil Handle
Non-flood PrimerSee-through Fuel Tank
Available in 6", 8", 9" and 10" XT Drill Assemblies.
Jiffy® 2500 Series LEGEND LIGHTning XT™New Style Black Engine provides powerful, lightweight
ice drilling performance.Model 77 LEGEND LIGHTning XT™ features:
Jiffy® 2500 Series Engine - The Ultimate in Power. This engine exceeds the performance of the 2 HP from the
2008-2009 season.HST High Speed Transmission - This transmission is a
High Speed Drilling Performance only Jiffy can provide.
Black D-Ice'r ARMOR - Prevents ice build-up for faster, cleaner cutting and a powerful performance.
Black Powder Coated Paint - Harder finish, more durable and a Rich Black Finish.
Page 3
Quantity
The standard by which all ice drills are judged, the Jiffy®
Model 30™ is owned by more ice fishermen than all
other ice drills combined. Model 30™ features:Jiffy® 3500 Series Engine - The Ultimate in Power & Torque. This engine exceeds the performance of the
3HP of the 2008-2009 season.New E-Z Connect™
New HTT Transmission - (High Torque Transmission), Heavy-duty clutch for fast, solid engagement and a
transfer of engine energy for additional torque.
Jiffy 2500 Series Model SD60i
Jiffy 2500 Series Engine - The Ultimate in Power. This engine exceeds the performance of the 2 HP from the
2008-2009 season.HST High Speed Transmission - This transmission is a
High Speed Drilling Performance only Jiffy can provide.
Available with standard 8", 9", and 10" standard or D-Ice'r ARMOR™ drill assemblies.
DescriptionJiffy® 3500 Series Model 30
Enlarged Power Point - Grabs the ice for a positive guide to smooth easy cutting.
Ideal for Initial Drilling and Redrilling of Ice Holes.See-through Fuel Tank
Non-flood Primer
NEW E-Z CONNECT™ Connection Collar - NO TOOLS REQUIRED to remove Drill Assembly
Enlarged Power Point - Which grabs the ice for a positive guide to smooth easy cutting.
Ideal for Initial Drilling and Redrilling of Ice HolesAvailable in 8" and 9" Standard Drill Assemblies
Non-flood PrimerSee-through Fuel Tank
Page 4
Quantity
The new Ripper™ serrated blade features baked on, E-friendly, zinc clear coat to protect the blade, while the
serrations provide a faster, smoother cut. When combined with D-Ice'r ARMOR™ on the bottom end of
the drill assembly, the Ripper™ provides the best in super-fast cutting and resistance to ice-up.
Jiffy® Universal XT D-Ice'r ARMOR™ with RIPPER™ Blades Drill Assembly
Fits All LHR Jiffy® Ice Drills (Includes Blade Teeth & Blade Protector)
Fits All LHR Jiffy® Ice Drills (Includes Blade Teeth & Blade Protector)
Jiffy® Standard Universal Drill Assembly
Fits All LHR Jiffy® Ice Drills (Includes Blade Teeth & Blade Protector)
Jiffy® drills have been improved with the Jiffy® blade, a bright plated chipper tooth blade as standard
equipment! These blades deliver a 20% increase in cutting performance right out of the box! The blades are
also available as replacement blades.
Use your Jiffy® Ice Drill Powerhead for another jobLH or CCW Rotation Earth Auger for use with Jiffy
Powerhead, for those small yard jobsEarth Auger will fit the following Models:
Models 30, 31, 34, 60, 75, 76, 77, 79
Description
Jiffy® Earth Auger Left Hand Rotation
Page 5
QuantityJiffy® STEALTH STX™ Replacement Blade Kit
The STEALTH STX™ Serrated Ripper Blade and Power Point Blades - lasts 2-3 times longer than any blade on the market, which give the owner 2-3 times
more fishing time.Jiffy® Replacement Stealth STX™ Blade Kit Includes the Yellow Ripper™ Blade and the two small Stealth
STX™ Blades
Jiffy® JET™ Hand Ice Drill Turbine-Blade Sets, for Jiffy® JET™ Hand Ice Drills Only
Jiffy® Hand Ice Drill Replacement Blades give you like-new drilling performance. All Jiffy hand ice drill blades
have induction-hardened edges that are precision ground to razor sharpness. The replacement blade sets
include all the hardware needed to install them.
Jiffy® Replacement RIPPER™ Ice Blade Teeth
ALL 30 and 70 Series POWER Ice Drill Assemblies w/ Counter-Clockwise Rotation
The Ripper™ serrated replacement blade features baked on, E-friendly, zinc clear coat to protect the blade,
while the serrations provide a faster, smoother cut. When combined with D-Ice'r ARMOR™ on the bottom
end of the drill assembly, the Ripper™ provides the best in super-fast cutting and resistance to ice-up.
Description
Page 6
Quantity
The blade protector for the Six Inch power ice drill is one piece, made of tough, high visibility yellow vinyl. The
vinyl stays flexible in even the coldest weather for easy-on, easy-off blade protection.
Jiffy® Jiffy® POWER Ice Drill Blade Protector (includes Blade Protector Strap)
The Jiffy® Blade Protectors are the same as those provided as standard equipment on Jiffy® ice drill
assemblies. The Power Ice Drill blade protectors are made of tough and durable polyethylene to protect the
blade and the critical pilot point from dulling and performance loss. They fit all Jiffy® power ice drills, 6", 8", 9", and 10" drill sizes and include the flexible-when-
cold vinyl strap to attach the protector to the drill.
Jiffy® Easy Snap Blade Protector
Easiest blade cover to install - just set your Jiffy® Drill into the Easy Snap Cover and the cover will snap tight
to drill assembly.
Easy Snap™ Cover is available in 8", 9" and 10" sizes.
Jiffy® JET™ Hand Ice Drill Turbine-Blade Sets, for Jiffy® JET™ Hand Ice Drills Only
The Jiffy® Hand Ice Drill vinyl blade protectors are available for all 6" and 8" Jiffy® Hand Ice Drills.
Description
Page 7
Quantity
Jiffy® Mille Lacs™ Ice Chisels were inspired by a handmade ice chisel used on the legendary Minnesota fishing lake, Mille Lacs. They use the same technology as all Jiffy ice blades and enable the user to do things
no spud bar can match, such as:Rapidly chisel a hole, even in three feet of ice
Jiffy® Deluxe Mille Lacs™ Ice Chisel, with Vinyl Chisel Shield and Handle Strap
Jiffy® Standard Mille Lacs™ Ice Chisel, with Vinyl Chisel Shield
Jiffy® Mille Lacs™ Ice Chisels were inspired by a handmade ice chisel used on the legendary Minnesota fishing lake, Mille Lacs. They use the same technology as all Jiffy® ice blades and enable the user to do things
no spud bar can match, such as:
Flare out the bottom a drilled holes to make it easier to land the larger fish species
Shave and shape ice to suit your needs.Deluxe model features adjustable lengths: 63.5" long
when connected and 69.5" long when extended.Includes Handle Strap.
Jiffy® Mini Mille Lacs™ Ice Chisel, with Vinyl Chisel Shield and Handle Strap
The Jiffy Mille Lacs™ Ice Chisel was inspired by a handmade ice chisel use on the legendary Minnesota
fishing lake, Mille Lacs. It uses the same technology as all Jiffy® ice blades and enables the user to do things
no spud bar can match, such as:
Rapidly chisel a hole, even in three feet of iceFlare out the bottom a drilled holes to make it easier to
land the larger fish speciesShave and shape ice to suit your needs.
Standard model one-piece chisel measures 52" long.
Rapidly chisel a hole, even in three feet of iceFlare out the bottom a drilled holes to make it easier to
land the larger fish speciesShave and shape ice to suit your needs.
The Mini model chisel measures 30" long.
Description
Page 8
Quantity
Jiffy® Chipper-Dipper™ with 4.75" D-Ice'r ARMOR™ Ladle
The Jiffy® Chipper-Dipper™ is THE favorite tool of serious ice fishing enthusiasts. All models feature plated
steel construction, engraved fish measure on the handle, rugged "dipper" strainer to clear ice chips, and
an ice chipping end (with edge guard) to keep hole open.
The 4.75" dipper is just the right size for smaller drilled
holes. When combined with the D-Ice'r ARMOR™, ice
can form, but it won't stick to the slick "dipper" strainer.
Jiffy® J500 Series™ Chipper-Dipper™
The Jiffy® Chipper-Dipper™ is THE favorite tool of serious ice fishing enthusiasts. All models feature plated
steel construction, engraved fish measure on the handle, rugged "dipper" strainer to clear ice chips, and
an ice chipping end (with edge guard) to keep hole open.
The J500 Series™ Chipper-Dipper™ is curved and lightweight and has a 5" ladle with larger drain holes.
Rugged construction with black powder coating.
The 6" dipper empties ice chips in a big hurry from the largest, deepest holes. When combined with the D-Ice'r
ARMOR™, ice can form, but it won't stick to the slick "dipper" strainer.
Jiffy® Chipper-Dipper™ with 6" D-Ice'r ARMOR™ Ladle
The Jiffy® Chipper-Dipper™ is THE favorite tool of serious ice fishing enthusiasts. All models feature plated
steel construction, engraved fish measure on the handle, rugged "dipper" strainer to clear ice chips, and
an ice chipping end (with edge guard) to keep hole open.
Description
Page 9
QuantityJiffy® Ice Drill Power Head Cover - Fits All Jiffy® Augers
Tough and durable 600D PVC fabric constructionProtects power head from snow, freezing rain, slush, dirt
and grit for dependable fast starts.Perfect for augers transported via ATV, snowmobiles,
on top of sleds, or in trucks.
Jiffy® Full Length Power Ice Drill Case - Fits All Jiffy® Augers
Tough and durable 600D PVC fabric constructionProtects power head from snow, freezing rain, slush, dirt
and grit for dependable fast starts.Adjustable shoulder strap for balanced carrying of auger
Organize tools and accessoriesDual zipper pulls for easy access
Zippered accessory storage pouch holds extension, tools, spark plugs, and replacement blades.
Description
Page 10
Quantity
Jiffy® Premium 40:1 Two-Cycle Oil
NEW Premium 40:1 Two-Cycle Smokeless Synthetic Blend Engine Oil with Fuel Stabilizer for use with all
brands of 2-Cycle Ice Drills. New reformulated 40:1 gas mixture reduces emissions. JIFFY® has taken the next
step for a cleaner environment!
Description
Jiffy® Tune Up Kit for ALL Tecumseh™ 2 H.P. & 3 H.P. Engines
NEW Premium 40:1 Two-Cycle Smokeless Synthetic Blend Engine Oil with Fuel Stabilizer for use with all
brands of 2-Cycle Ice Drills. New reformulated 40:1 gas mixture reduces emissions. JIFFY® has taken the next
step for a cleaner environment!2 H.P. or 3 H.P. Spark Plug for all Tecumseh™ or Jiffy®
2500/3500 engines and wrench
Jiffy® Tune Up Kit Includes:
Jiffy® Spark Plugs
Spark Plug for Tecumseh 2 HP or Jiffy® 2500/3500 Series Engines
Jiffy® Blade Sharpener - For All Jiffy® Blades
Page 11
QuantityDescription
Jiffy® Replacement Fuel Tank Cap for Tecumseh Engines
Jiffy® Power Ice Drill Replacement Fuel Tank Cap for All Tecumseh Engines.
Jiffy® E-Z Connect Adaptor
Convert your Jiffy® to the NEW E-Z Connect Collar system. Connect your drill assembly with the metal
collar on the bottom end of the E-Z Connect Adaptor and use the E-Z Connect Collar to attach to your Jiffy® Power Head. Also gives you 3 extra inches of drilling
length!
When the ice gets really thick, use a Jiffy® Power Ice Drill Extension. They are made to withstand the high-
speed power of a Jiffy Power Ice Drill. For added versatility, the #2845 Adjustable Length Extension has
both a 6" and 12" position to meet changing needs.
NEW Jiffy® Mitten Grip Handle - Fits All Jiffy® Ice Drills
Jiffy's NEW Large Professional Grip Recoil Handle for easier starting. Fits all recoil start engines.
Jiffy® POWER Ice Drill Extension for Jiffy® Power Ice Drill Assemblies
Page 12
Quantity
Jiffy® LECTRIC™ 10 Foot Extension Cord
Jiffy® LECTRIC™ 10 Foot Wiring Harness for ATV, Snowmobile, Truck or Car
Jiffy® WALL-it!™ Wall Storage Stand
Convenient power ice drill storage is easy with a WALL-it!™
Put one:
Description
In your garageIn your ice fishing shack
In your storage shedIn your basement
Protects your Power Ice Drill from damage, needs NO floor space, folds up when not in use, install in minutes, securely bolts into wall studs, reduces clutter-organize!
Everything included in the kit.
Jiffy® Connection Kit
The Jiffy® Connection Kit includes:Hex Wrench
Sockethead CapscrewHex Nut
Key Keeper
Page 13