sinopec international edition 2011.1

1DOWNSTREAM PRODUCTS
SINOPEC International
Go back
Downstream Products
Go back
Standard: ASME/ API530/API560
900kt/a Ethylene Cracking unit in Thailand
Go back
HYCO Reformer: 700,000.00T/Y
Standard: ASME/ API530/API560
Go back
Type:
Gasoline Hydro treating Heater
Hydro cracking Heater
Catalytic cracking Heater
Standard: ASME/ API560,API530
Certificate: ASME, PED
2.8MT/Y Diesel oil Hydro treating Heater in SINOPEC-FUJIAN
Go back
Type:
Gasoline Hydro treating Heater
Hydro cracking Heater
Catalytic cracking Heater
Standard: ASME/ API560,API530
Certificate: ASME, PED
Go back
2. Tower
General Description:
The overall delivery, logistics advantages
Petrochemical plants and chemical installations units
Go back
– Features:
Go back
– Features:
DimensionsDiameter- 9.6m
Number: 6
Go back
– Features:
Go back
– Features:
Go back
Go back
Number: 2
Go back
End
Design as per specific customer requirements, and international codes and standards.
Quality assurance: U ,U2 stamps by ASME.
The quality systems are covered under ISO 9001 ,ISO 14000…
The quality systems are backed by the latest facilities for radiography, including 12 MeV linear accelerator ,ultrasonic (including TOFD ), maganetic particle & liquid penetrant examination.
The reactors cover the guarantee against defects of mechanical design, fabrication, inspection and testing.
Supply these materials as per ASME/ASTM.
In case of oversized of reactors, we can also complete at Site.
Go back
Go back
3.2 Reactor-Forging
Go back
3.3 Reactor-Plate
– Features:
– Features:
– Features:
Go back
Newly Process Technology of Basell Spherizone 450KTA PP Plant
Go back
3.7 PP Reactor
Key Reactor for 300 KTA PP Plant with DOW Process Technology
Go back
– Features:
Go back
Diameter: 6760 mm
Licensor: SD, DOW, SHELL
Go back
– Features:
– Features:
Diameter: 9300 mm
Length: 36.2 m
Weight: 355 ton
Process Capacity: 1500 KTA
Pressure: 4.86 MPa
End
U bundle: AKU,BKU
Type:
Screw Lock Ring Heat Exchanger;
Various Enhanced Tube Heat Exchanger
Codes & Standards: ASME Section VIII Div.1 PED; AS1210; API; RINA; NR-13
MaterialsCS / SS / Duplex / Ni / Cu / Ti / Zr / Ta
DimensionsD-6m/ L-22m /s= 20000m2
*
– Features:
Any case when two media cannot be mixed.
*
– Features:
Bearing higher pressure
*
– Features:
Compact design with large heat transfer area
Anti-fouling with self-cleaning
*
– Features:
Pressure drop reduced by 20%
Dead zone eliminated and fouling is reduced
Flow-induced vibration is prevented
Gas-gas heat exchangers, gas-liquid heat exchangers, compressor aftercoolers, reboilers and condensers, etc.
*
– Features:
Main Technical Advantages: mainly applied in PP/HDPE/LDPE/LLDPE plants; utilizing the annealed stainless steel tubes and with the fluidized tube end of heat exchangers that are specially designed and machined to ensure the powder medium not to be accumulated or scaled or deposited on the inner wall during the transmission and reaction process.
Single Line Processing Capacity: 450 KTPY
Main Materials: LTCS, SS
Maximum Operation Temperature: -46
Maximum Operation Pressure: 6.4Mpa
Main Licenser: SEI, BASELL, DOW, TECHNIP, JBB
*
– Features:
Pressure: up to 20MPa
– Features:
Corrugation can compensate temperature difference stress
Intensified turbulent flow reduces fouling remarkably
Application Fields:
Liquid-liquid HE,
Liquid-gas HE,
Gas-gas HE,
– Features:
Intensified turbulent flow reduces fouling remarkably
Shallower and wider grooves on the external walls are better for draining of condensate and make liquid films thinner
Application Fields:
Liquid-liquid HE,
Liquid-gas HE,
Gas-gas HE,
Go back
– Features:
Boiling heat transfer coefficient 2-4.8 times more than smooth tubes
The wall superheat is remarkably lower
Self-cleaning reduces fouling
Lower operation cost
– Features:
End
Max. size: (Length) 15m x (Width) 6m
Max. weight : 28 ton
Standard: ASME/ API661
Max. design temperatures: 650oC.
Go back
A. Induced Draft Unit
The induced draft unit gives a steady and endurable thermal performance due to the protection of the finned surface against wind, rain and snow by the plenum chamber. The induced draft also ensures better air distribution, less hot air recirculation, less fouling and lower noise levels at grade.
4.11 Heat Exchanger - Air Cooler
Go back
B. Forced Draft Unit
The forced draft unit allows an easy access for maintenance to the bundles. Furthermore, the fans remain in the cold ambient air temperature and allow high process inlet temperature as
well as with a long life.
Go back
C. Humidified Air Cooler
The combination of air cooler and humidification section is a good solution in some dry areas and hot climates. The ambient air is cooled by direct contact with water in the humidification section, which further reduces the temperature of process streams and improves the heat exchange for a fixed set of process temperature.
Go back
D. Recirculation Unit
In very cold climates (RUSSIA, CANADA and ALASKA of USA) and also for special process, it is necessary to provide hot air recirculation to prevent freezing or congealing. Different types
of hot air recirculation are possible thanks to various combination of louvers, steam coils, auto variable fans and / or variable speed.
Go back
E. Air Cooled Vacuum Steam Condenser
This anti-freeze steam condenser is supported on an A-frame steel structure equipped with a vacuum package system including tanks, pumps and control devices.
End
Codes & Standards
ASME PEDSAMSUNGS&WTECHNIPTEMAUHDEUOPBASF
BAYERBPCTCIFOSTERWEELERHITACHIKTI
*
– Features:
Dimension: 4100*30000mm
*
– Features:
– Features:
– Features:
– Features:
– Features:
– Features:
– Features:
*
– Features:
Application Field: PTA
– Features:
*
5.11 Non-ferrous Equipment - Preliminary Cleaning Column
*
– Features:
*
5.15 Non-ferrous Equipment - Fluidized Bed Reactor
*
– Features:
Application Field: Chemical Project
Application Field: Chemical Project
Go back
Flow range: 20-8500m3/min
Material: Carbon steel/stainless steel
Certificate: API
Go back
Material: stainless steel forging
Certificate: API
Go back
Material: stainless steel(forging)
Certificate: API
Go back
Flow range: 3500-165000m3/h
Material: carbon steel
Certificate: API
Go back
catalytic crack gas compression in large oil refinery etc.
Certificate: API
Go back
catalytic crack gas blower etc.
Go back
Type: GM25-GM75
Go back
Intelligent Instruments
Go back
7.1 Distributed Control System (DCS)
Brings powerful operational functions that are highly reliable for process control, friendly openness for third-party integration, and maximum efficiency in project commissioning whether it is small, medium, large, even extra-large. Has been applied in Petrochemical, Chemical, Oil & Gas, Power, Cement, Metal, Pulp & Paper and Food & Beverage industries.
CE certified
Support on-line upgrading
7.2 Advanced Process Control (APC)
Gives full consideration of the complex nature of the real process control. APC-Suite helps realize optimal production and enhance the bottom line of your plant.
Software Package
APC-PCalc: On-line process calculation
APC-PFC: Predictive fction control
ESP-iSYS-A: Core real-time database
7.3 Ethernet for Plant Automation (EPA)
Developed the world's first EPA protocol chip accepted as IEC/PAS 62409. EPA is an advanced real-time Ethernet-based field-bus for communication among field equipments.
Advanced real-time Ethernet-based field-bus
7.4 Intelligent Instruments
Developed the world’s first paperless recorder. Pioneers in this sector and brings the latest technologies to intelligent instruments for industrial use
End
R5000 Paperless Recorder
RS-232C/RS-485 interface
Ramping and stepping the output
Storage and recall of 10 setups
Auto flash terminals
Go back
- Capacity120,000 (m3/h)
- Head~ 3,500 (m)
- Pressure 35 (MPa)
Product Summarize:
Design and manufacture in accordance with API610 standard with high reliability and performance, wide application of petrochemical industry, various structural transformations vary form different working conditions, as EAP9 typical structure, EAPK open-impeller structure, EPAD lightweight structure, EPAG high-pressure structure, EAPX low flow rate structure.
Design Parameter:
Go back
Product Summarize:
Double suction impeller for one-stage structure; double suction impeller for the first stage and single suction impeller for second stage of dual-stage structure, hydraulic utilize advanced design means such as 3D modeling, DFD flow field analysis, etc based on excellent hydraulic model at home and abroad, wide scale of flow and head, high efficiency, good performance concerned anti-cavitation, is new generation energy-efficient product.
Design Parameter:
Go back
Product Summarize:
Apply to rigorous and heavy industry working conditions with advantages such as safe and reliable structure, stable operation, convenient maintenance, long service lift, etc.
Design Parameter:
Go back
Product Summarize:
Casing of this serial is volute structure, centerline supporting, symmetrical arrangement of impellers, self balance of axial loads without complex balancing device such as balancing plate or balance drum; suction and discharge are arranged under the casing, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high-pressure conditions.
Design Parameter:
Go back
Product Summarize:
SCSG is single-casing ring-section horizontal multistage pump, the external pressure parts use forgoing or casting, balance axial loads by combined effect with drum-plate-drum, effective control of “flash evaporation” when operation, realize axial force dynamic balance, bearings bear few axial loads.
DCSG is double-casing ring-section horizontal multistage pump, the external pressure parts use forgoing or casting, the core is ring-section which can be pulled out entire, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high-pressure conditions.
Design Parameter:
SCSG DCSG
Applicable codes and standardsAPI610 10th Edition
Go back
Product Summarize:
SCSZ is single-casing ring-section horizontal multistage pump, the external pressure parts use forgoing or casting, symmetrical arrangement of impellers, self balance of axial loads without complex balancing device, is applicable to transporting medium containing certain particles.
DCSZ is double-casing ring-section horizontal multistage pump, he external pressure parts use forgoing or casting, the core is ring-section which can be pulled out entire, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high-pressure conditions:
Design Parameter:
SCSZ DCSZ
Applicable codes and standards: API610 10th Edition
Go back
Product Summarize:
DCSK is double-casing structure, the external pressure parts use forgoing; the core is axially split, symmetrical arrangement of impellers, can be pulled out entire, dismounting or installation without dismantling inlet/outlet pipelines, is applicable to high-temperature and high-pressure conditions:
Design Parameter:
Go back
Product Summarize:
Design and manufacture in accordance with API610 0th Edition, thorough consideration and design concerned structure as supporting, cooling, maintenance, etc, can be equipped with kinds of auxiliary and monitoring system to achieve higher safety and reliability. Various structural transformations vary form different working conditions, as LDB-A multistage radial diffuser structure, LDB-B multistage blower structure, LDB-C one- and dual-stage large flow mixed-flow structure.
Design Parameter:
Head~1000m

sinopec international edition 2011.1

Documents