sheet floors water-based urethane fortified sealer finish€¦ · flooring, resilient tile,...
TRANSCRIPT
Product code ForMAt2421332001 1 x 18.93 L (1 X 5 US Gallon)
SF303 Water Based-Urethane Fortified Sealer Finish is a unique, black pigmented, urethane fortified, metal free, acrylic sealer/finish. SF303 is designed to provide a durable high gloss coating to a variety of surfaces including arena skate flooring, resilient tile, mineral, stone, and asphalt anti-fatigue floor surfaces. SF303 can be used alone as a sealer and finish for arena skate flooring, or top coated with an Avmor floor finish and maintained by high speed burnishing to provide a “wet-look” gloss on other flooring surfaces.
SHEET FLOORS
• Specially formulated with highly enriched black pigments
• Can be used on all rubber floor types
• Minimal coats for coverage
FEATURES
Ensures full uniform color appearance
Wide array of use on sports and non-sports flooring
Saves on labour and material cost
avmor.com TRAINING PROGRAMS AVAILABLE
AVMOR Ltd.950 Michelin, Laval, Québec Canada H7L 5C1 Tel.: (450) 629-3800 Fax: (450) 629-43551 800 387-8074 [email protected]
FOR A MORE COMPLETE CLEAN, CONTACT US!
BENEFITS
This is where the rubber meets the road.Saves on labour and material cost.
Water-Based Urethane Fortified Sealer Finish
SHEET FLOORS
avmor.com TRAINING PROGRAMS AVAILABLE
AVMOR Ltd.950 Michelin, Laval, Québec Canada H7L 5C1 Tel.: (450) 629-3800 Fax: (450) 629-43551 800 387-8074 [email protected]
FOR A MORE COMPLETE CLEAN, CONTACT US!
• Always wear safety equipment when preparing and cleaning - eye protection, gloves and proper footwear.
• Always put out wet floor signs whenever wet work is being done.
• Ensure areas not being coated are safe and protected when exiting the coating zone as to not compromise adjacent flooring or carpeting, adjacent walls especially.
WhAT yoU NEEd To kNoW• SF303 Water Based-Urethane Fortified Sealer Finish applies seamlessly and levels quite well.
• Dry time in normal conditions will be approximately 60 minutes per coat.
• 1st coat coverage is approximately 1,200 - 1,500 ft2 ( 111.5 – 139.3 m2) per gallon (3.78 L) and subsequent coats will approximate 1,500 -2,000 ft2 (139.3 – 185.8 m2) per gallon (3.78 L)
• Foot/Skate traffic can be re-introduced after the last coat has dried.
• Machine maintenance (buffing, burnishing, auto scrubbing) may resume after 24 hours.
ProTip: Use walk off matting directly outside the floor being processed as a safe exit zone.
ProTip: If a mop bucket was used, ensure wheels are wiped clean before introducing it to other areas of the facility.
ProTip: When finishing out a door, return your final mop stroke to the wall, adjacent to the door to avoid swirling of finish, for professional results.
• Fine String Floor Finish Mop (smooth floors)
• Microfiber Floor Finish Applicator (smooth floors)
• Mop and Bucket or Finish Application Bucket (with garbage bag as a liner)
• ¼” Nap Roller with Extendable Pole (skate and porous floors)
• Scotch Blue Pre-Taped Painters Plastic (24”X30 yard roll)
• Fas-Trak’s Micro Trak (small areas) or Ultra-Trak for Large areas (Optional)
TooLS
Professional Results
SAFETy
• Floor is flawless, shiny and pristine. • Floor is protected and ready for
daily use.• Aesthetics are visually appealing.• Any areas taped off should be
removed and disposed.
Pro Tips
Water-Based Urethane Fortified Sealer Finish
Water-Based Urethane Fortified Sealer Finish