SHADOWS COLLECTION

GLOSSY

12

MAT

TE

SHADOWSGLAZED WALL DECOR

COMBINATIONS

14

10

3

TONAL HUES FORM A DYNAMIC BACKDROP

SHADOWS Ash Grey Matte 4” x 12” / Deep Grey Matte 4” x 12” / Smoke Matte 4” x 12”

SHAD

OW

S W

hite

Mat

te 4

” x

12”

/ B

lack

Mat

te 4

” x

12”

54

SHAD

OW

S B

row

n G

loss

y 4

” x

12”

76

SHAD

OW

S T

aupe

Mat

te 4

” x

12”

/ A

lmon

d M

atte

4”

x 12

”

SHAD

OW

S W

hite

Glo

ssy

4”

x 12

” /

Ash

Gre

y G

loss

y 4

” x

12”

98

34

34

34

34 34

34

34

34

12

12

12

12

12

12

12

12

All sizes are nominalFor technical information refer to our website www.stonepeakceramics.com

Sizes

WALL DECOR MATTE

SHADOWS

Trim System

4" x 12" BULLNOSE754784 SHADOWS WHITE matte

4" x 12" BULLNOSE754788 SHADOWS DEEP GREY matte

4" x 12" BULLNOSE754786 SHADOWS ASH GREY matte

4" x 12" BULLNOSE754787 SHADOWS SMOKE matte

Sizes Trim System

4" x 12" BULLNOSE754789 SHADOWS ALMOND matte

4" x 12" BULLNOSE754790 SHADOWS BROWN matte

4" x 12" BULLNOSE754791 SHADOWS TAUPE matte

4" x 12" BULLNOSE754785 SHADOWS BLACK matte

4" x 12"754878 SHADOWS WHITE matte

4" x 12"754882 SHADOWS DEEPGREY matte

4" x 12"754880 SHADOWS ASH GREY matte

4" x 12"754881 SHADOWS SMOKE matte

4" x 12"754879 SHADOWS BLACK matte

4" x 12"754883 SHADOWS ALMOND matte

4" x 12"754884 SHADOWS BROWN matte

4" x 12"754885 SHADOWS TAUPE matte

1110

34

34

34

34 34

34

34

34

12

12

12

12

12

12

12

12

All sizes are nominalFor technical information refer to our website www.stonepeakceramics.com

WALL DECOR GLOSSY

SHADOWS

4" x 12"754870 SHADOWS WHITE glossy

4" x 12"754872 SHADOWS ASH GREY glossy

4" x 12"754873 SHADOWS SMOKE glossy

4" x 12"754871 SHADOWS BLACK glossy

4" x 12"754875 SHADOWS ALMOND glossy

4" x 12"754876 SHADOWS BROWN glossy

4" x 12"754877 SHADOWS TAUPE glossy

4" x 12" BULLNOSE754792 SHADOWS WHITE glossy

4" x 12" BULLNOSE754796 SHADOWS DEEP GREY glossy

4" x 12" BULLNOSE754794 SHADOWS ASH GREY glossy

4" x 12" BULLNOSE754795 SHADOWS SMOKE glossy

4" x 12" BULLNOSE754797 SHADOWS ALMOND glossy

4" x 12" BULLNOSE754798 SHADOWS BROWN glossy

4" x 12" BULLNOSE754799 SHADOWS TAUPE glossy

4" x 12" BULLNOSE754793 SHADOWS BLACK glossy

Sizes Trim System Sizes Trim System

4" x 12"754874 SHADOWS DEEPGREY glossy

1312

SIZES SHADOWS SIMPLY MODERN PARKLAND PALAZZO SKY HIGHLAND CLASSIC 2.0

4" x 12"

WhiteMatte & Glossy

Simply Creme

All Colors All Colors All Colors

White Calacatta Oro

BlackMatte & Glossy

Simply Black

Acadia CastleGraphite

Black

Ash GreyMatte & Glossy

Arctic CloudskyWhiteGreigeBlack

Bianco CarraraTravertino Grigio

Smoke Matte & Glossy

Vintage Grey

Nightsky

Deep Grey Matte & Glossy

Simply Grey

Greensky

Almond Matte & Glossy

Shenandoah Moonsky

Brown Matte & Glossy

Simply Coffee

Antique Cotto

Taupe Matte & Glossy

Simply Tan

BeigeCocoaGreige

Travertino Beige

SHADOWS COMBINATIONS

SHAD

OW

S S

mok

e G

loss

y 4

” x

12”

/ S

mok

e M

atte

4”

x 12

”

1514

PHYSICAL PROPERTIES ASTM TEST INDUSTRY STANDARDS STONEPEAK RESULTS

Water Absorption C373 P4 P4

Thickness Dimension C499 Range ± 0.04 Inc.Max ≤ ± 0.04 Inc.

Facial Dimension C499 ± 0.25% ≤ ± 0.25%

Warpage Average Diagonal C485 Range - 0.30% / + 0.40% ≤ - 0.30% / + 0.40%

Warpage Average Edge C485 Range - 0.30% / + 0.40% ≤ - 0.30% / + 0.40%

Wedging Average C502 ± 0.25% ≤ ± 0.25%

Bond Strength C482 ≥ 50 psi ≥ 200 psi

Breaking Strength C648 ≥ 250 lb. ≥ 250 lb.

Visual Abrasions Resistance for Glaze Tiles C1027 No Requirement

Range 0 – 5 Class 3

Chemical Resistance C650 No RequirementRange E – A Unaffected / Class A

Stain Resistance C1378 No RequirementRange E – A Class A*

Aesthetic Class/Shade Rating Visual EvaluationShade &Texture

No RequirementRange V0 – V4 V2

SHADOWS GENERAL TECHNICAL SPECIFICATIONS

INITIAL CLEANING DURING INSTALLATION As with any flooring material, the most important step in the care and maintenance of your porcelain floor is the initial cleaning.

The single most important step in caring for your StonePeak Ceramics’ floor is the complete removal of setting material, grout residue, and/or any construction residue from the surface of the tiles before they have a chance to dry. In most cases, StonePeak Ceramics’ porcelain tiles can be cleaned successfully by scrubbing the installation with a

“neutral detergent cleaner” followed by a thorough rinsing.

If a grout residue still remains, rinse further, cleaning the tile several times with clean water, to be certain you have removed traces of grout residue from the surface of the tiles.

Grout manufacturers have printed detailed instructions for the proper cleaning of grout residues available. The grout manufacturer’s directions should be followed if a grout film is present on the surface of the porcelain tiles.

Once the initial cleaning process has been completed, StonePeak Ceramics’ porcelain tiles just need to be swept or vacuumed and damp mopped with a “neutral detergent cleaner” followed by a thorough rinsing.

SPECIAL GROUTING PRECAUTIONSIt is recommended that a test patch be done prior to grouting the installation to determine if contaminations of grout pigment will occur on the tile — especially when using light colored tiles or polished tiles that are to be grouted with a dark contras ting colored grout, or when dark colored tiles are to be grouted with a light colored grout. If discoloration does not occur on the surface of the tile, then proceed with grouting. If discoloration does occur, it is recommended to request from the grout manufacturer a proper procedure for the protection of this surface.

PROPER CARE DURING CONSTRUCTION PHASELike any other finished material, StonePeak Ceramics’ porcelain tiles are viewed as a finish flooring material. We strongly recommend that a protective cover such as cardboard, construction paper, plywood, and/or other covering which will protect the porcelain tile during the initial construction phase be used. The use of plastic as a cover is not recommended, since plastic becomes slippery when construction residue comes in contact with the plastic. In addition, plastic has a tendency to delay the natural curing process of the thin-set and/or grout.

GLAZED, MATTE, HONED & TEXTURED TILESStonePeak Ceramics’ porcelain tile products do not require the use of sealers, surface coating or waxes on the Glazed, Matte, Honed and Textured porcelain tiles. In fact, the surface of the matte series is so smooth, and non-absorbing, that Stain Test results show that StonePeak Ceramics’ porcelain tiles are virtually stain resistant. Applying a sealer or surface coating to matte finish porcelain tiles will only add unneces-sary steps to the overall maintenance program — without enhancing the overall appearance of the tile. The use of sealers on impervious porcelain paver tiles will turn a low-maintenance tile into labor intensive high-maintenance tile, and in most cases, these applied surface sealers on matte porcelain tiles change and/or diminish the slip resistance of the porcelain tile.

POLISHED TILESIn the event a polished finish is used in an area prone to excessive spills or dirt, it may be advisable to treat the tile with a penetrating-type sealer.

During the polishing process, microscopic pores are sometimes exposed. Although the pores are shallow, spills can fill them making standard cleaning procedures inadequate. By using a penetrating-type sealer, these microscopic pores are filled preventing stains from setting in. A penetrating-type sealer is designed only to fill pores, not to coat the tile surface.

You will not alter the polished tile’s appearance, provided a recommended sealer is used and applied according to manufacturer’s instructions.

– Actual test data are available upon request.

– Please ask for individual test reports, as results vary depending on finish.

– Specific technical information is available on our website: www.stonepeakceramics.com

– StonePeak collections are materials subject to variations in color and/or vein, as they are created using natural products.

– DCOF: all values given are for matte or honed material. No values are given for “polished” materials. StonePeak does not recommend polished surfaces in areas subject to exposure from grease, oil, or water.

– Water (especially standing water), oil, grease, etc., create slippery conditions. Floor applications with exposure to these elements require extra maintenance and caution in product selection.

– TCNA Handbook for Ceramic Tile Installation

1716

CARE & MAINTENANCE

RECOMMENDATIONS GUIDE

– StonePeak highly recommends the use of low voc, non-hazardous, and non-polluting products for the cleaning and maintenance of tile and grout products.

– Acid washing is rarely recommended. Acid or acid based cleaners should not be used to clean a grout residue. Some acids can burn non-epoxy or cementitious grouts and leave a white film that is almost impossible to remove. Also, the use of certain acid solutions can structurally weaken the grout in the joint of the tile. If in the event a mild solution of sulfamic or phosphoric acid base cleaner is needed, carefully read the manufacturer’s instructions.

DAILY MAINTENANCEAs with any flooring material, general maintenance and cleaning varies depending on the surface, texture of the tile and surface contaminate. Generally, neutral cleaners are more than sufficient to clean and maintain StonePeak Ceramics’ porcelain tiles. It’s important that the cleaner used is a non-oil, non-soap, and non-animal fat based product. These cleaners have a tendency to act like a magnet and attract dirt and dust, due to the residue build-up left behind during the clean up. Generally water and a soft sponge will remove most contaminants from your porcelain tile. If a cleaning product other than water is used for general cleaning only a neutral Ph cleaner (with the characteristics described above) should be used. These neutral Ph cleaners are available from most sealer manufacturers and can be found at a local hardware store or tile distributor. Cleaners such as Formula 409, Fantastic, or Windex can sometimes be used on unsealed tiles, but most are alkaline in nature and could attack the surface finish. If using a cleaner such as this always test a small area first. If you are not able to remedy the situation using the materials above refer to the Heavy Duty Maintenance section of the Recommendations Guide.

HEAVY DUTY MAINTENANCEIf contaminants occur due to more than daily routine activities, then the use of a stronger cleaner may be needed. Use caution in selecting the product for heavy duty cleaning as many chemicals can damage items of the installation or near the installation as well as discolor and/or stain certain types of tiles. Porcelain tiles are the most durable tiles available, however, we do not test every chemical made, and therefore a test area is needed to confirm that the product selected is suitable for the removal of the contaminant in question. Please refer to the Stain Removal Guide for information about particular stains and manufacturer information. The information listed is only a guide. For more specific information please contact one of the manufacturers listed. Always follow the directions from the manufacturer of the cleaning product you intend to use.

18

StonePeak Ceramics, Inc.Corporate Headquarters314 West Superior StreetChicago, Illinois 60654 (312) 506-2800 (312) 335-0533 info@stonepeakceramics.com www.stonepeakceramics.com

Sample Express1-866-STPEAK11-866-787-3251

Production Facility238 Porcelain Tile DriveCrossville, Tennessee 38555