STEP 2

HARDWARE LIST :

STEP 1

MADE IN MALAYSIAPAGE 1 OF 3

ASSEMBLY :

TBS-15468 PNM,GR

Allen Key1 pc

(Small)Flat Washer

8 pcsJCBC Bolt

8 pcsWrench1 pc

(Large)Flat Washer

12 pcs

(Small)Lock Washer

8 pcsHex Nut12 pcs

(Large) Lock Washer

12 pcs

Thread Head Thread Head(long) (short)

4 pcs 4 pcs

Turn the pedestal upside down. Attach legs by inserting hanger bolts through pre-drilled holes on pedestal, insert Flat Washer,Lock Washer and Nut onto the Hanger Bolt then tighten with the Wrench provided.

Bolt Bolt

To build a Gather Height Table use Hardware (A) Thread Head Bolt (long).2.1 Turn the base right side up. Insert the Thread Head Bolt (long) onto the column as shown in the below Figure 2.1. To build a Dining Height Table use Hardware (B) Thread Head Bolt (short).2.2 Turn the base right side up. Insert the Thread Head Bolt (short) as shown in the below Figure 2.2.

(A) For Gather Height Table only

(B) For Dining Height Table only

Lock Washer (Large)Flat Washer (Large)

WrenchHex Nut

Pedestal

Leg

Level Glide

Lock Washer(Small)

Lock Washer�(Small)

Allen Key

Allen Key

JCBC Bolt

Flat Washer(Small)

Side Panel

Thread Head Bolt (long)

(Fig 2.1)

column

Counter height table

Thread Head Bolt (short)

(Fig 2.2)

Dining table

SOLID BOATSHAPE BUTTERFLY EXT, DINNING TABLE

Unscrew the side panel

STEP 3Position the table top upside down on a smooth, protective�surface such as carpet.Unscrew the side panel with screw driver thenInstall the side panel and secure with Flat Washer(Small), LockWasher(Small) and JCBC Bolt. Attach mounting plate as shown.Secure with Flat Washer(Small), Lock Washer(Small) and JCBC Bolt,then tighten all the bolts with Allen Key provided.

SH2T425712CT / SH2B425712CT/SH2BXCT

STEP 4

Lift both leaves from the compartment and flip up the apron then unfold Table Leaf and place the leaf on the top surface carefully.

Unlock the hooks underneath the table and pull the table top wide open equally from bolt ends. Align and attach the table top to the pedestal. Insert a Flat Washer,Lock Washer and Nut onto the Thread Head Bolt.Tighten all Nuts with the Wrench provided.

STEP 5

MADE IN MALAYSIAPAGE 2 OF 3TBS-15468 PNM,GR

Lock Washer (Large)Flat Washer (Large)

WrenchHex Nut

Unlock Hook

Flip up apron

SOLID BOATSHAPE BUTTERFLY EXT, DINNING TABLESH2T425712CT / SH2B425712CT/SH2BXCT

TO STORE THE CENTRE LEAF WHEN NOT IN USE

STEP 6Push Table Top from both ends to close gap and lock the hooks underneath table. Adjust the level glides until thetable sits firmly.

Unlock the hooks underneath the table and pull the table top wide open equally from both ends. Flip down the apron and fold the centre leaf to store within the compartment. Push table top from both ends to close. Lock the hooks underneath the table.

MADE IN MALAYSIAPAGE 3 OF 3TBSR-15468 PNM,GR

Level Glide

Lock Hook

Flip down apron

Lock HookUnlock Hook

SOLID BOATSHAPE BUTTERFLY EXT, DINNING TABLESH2T425712CT / SH2B425712CT/SH2BXCT