STEP 2
HARDWARE LIST :
STEP 1
MADE IN MALAYSIAPAGE 1 OF 3
ASSEMBLY :
TBS-15468 PNM,GR
Allen Key1 pc
(Small)Flat Washer
8 pcsJCBC Bolt
8 pcsWrench1 pc
(Large)Flat Washer
12 pcs
(Small)Lock Washer
8 pcsHex Nut12 pcs
(Large) Lock Washer
12 pcs
Thread Head Thread Head(long) (short)
4 pcs 4 pcs
Turn the pedestal upside down. Attach legs by inserting hanger bolts through pre-drilled holes on pedestal, insert Flat Washer,Lock Washer and Nut onto the Hanger Bolt then tighten with the Wrench provided.
Bolt Bolt
To build a Gather Height Table use Hardware (A) Thread Head Bolt (long).2.1 Turn the base right side up. Insert the Thread Head Bolt (long) onto the column as shown in the below Figure 2.1. To build a Dining Height Table use Hardware (B) Thread Head Bolt (short).2.2 Turn the base right side up. Insert the Thread Head Bolt (short) as shown in the below Figure 2.2.
(A) For Gather Height Table only
(B) For Dining Height Table only
Lock Washer (Large)Flat Washer (Large)
WrenchHex Nut
Pedestal
Leg
Level Glide
Lock Washer(Small)
Lock Washer�(Small)
Allen Key
Allen Key
JCBC Bolt
Flat Washer(Small)
Side Panel
Thread Head Bolt (long)
(Fig 2.1)
column
Counter height table
Thread Head Bolt (short)
(Fig 2.2)
Dining table
SOLID BOATSHAPE BUTTERFLY EXT, DINNING TABLE
Unscrew the side panel
STEP 3Position the table top upside down on a smooth, protective�surface such as carpet.Unscrew the side panel with screw driver thenInstall the side panel and secure with Flat Washer(Small), LockWasher(Small) and JCBC Bolt. Attach mounting plate as shown.Secure with Flat Washer(Small), Lock Washer(Small) and JCBC Bolt,then tighten all the bolts with Allen Key provided.
SH2T425712CT / SH2B425712CT/SH2BXCT
STEP 4
Lift both leaves from the compartment and flip up the apron then unfold Table Leaf and place the leaf on the top surface carefully.
Unlock the hooks underneath the table and pull the table top wide open equally from bolt ends. Align and attach the table top to the pedestal. Insert a Flat Washer,Lock Washer and Nut onto the Thread Head Bolt.Tighten all Nuts with the Wrench provided.
STEP 5
MADE IN MALAYSIAPAGE 2 OF 3TBS-15468 PNM,GR
Lock Washer (Large)Flat Washer (Large)
WrenchHex Nut
Unlock Hook
Flip up apron
SOLID BOATSHAPE BUTTERFLY EXT, DINNING TABLESH2T425712CT / SH2B425712CT/SH2BXCT
TO STORE THE CENTRE LEAF WHEN NOT IN USE
STEP 6Push Table Top from both ends to close gap and lock the hooks underneath table. Adjust the level glides until thetable sits firmly.
Unlock the hooks underneath the table and pull the table top wide open equally from both ends. Flip down the apron and fold the centre leaf to store within the compartment. Push table top from both ends to close. Lock the hooks underneath the table.
MADE IN MALAYSIAPAGE 3 OF 3TBSR-15468 PNM,GR
Level Glide
Lock Hook
Flip down apron
Lock HookUnlock Hook
SOLID BOATSHAPE BUTTERFLY EXT, DINNING TABLESH2T425712CT / SH2B425712CT/SH2BXCT
