setting up the printer station...setting up the printer station préparation du poste d’impression...
TRANSCRIPT
-
■
Setting Up the Printer Station
■
Préparation du poste d’impression
■
Installazione della stazione di stampa
■
Einrichten der Druckerstation
■
Instalación del carrito de la impresora
Turn off the printer before moving it.Fo
r printers using ColorStix solid ink:
turn the printer off and wait 30 minutes for the ink to solidify. Failure to do so will result in internal ink spills that can damage the printer.
Always move the printer and its lower tray assembly (if installed) separately.
Lock the printer station’s wheels.Place the printer on the cart: if your printer has a lower tray assembly, place it on the cart
first
, then place the printer on the assembly.
Store printer supplies in the cabinet and drawer.
Mettez l’imprimante hors tension avant de la déplacer.
Pour les imprimantes utilisant de l’encre solide ColorStix :
mettez l’imprimante hors tension et attendez 30 minutes que l’encre se solidifie, pour éviter de causer une fuite interne de l’encre et une détérioration de l’imprimante.
Déplacez toujours séparément l’imprimante et le bac d’alimentation inférieur (le cas échéant).
Verrouillez les roues du poste d’impression.Placez l’imprimante sur le chariot : si vous avez installé le bac d’alimentation inférieur, placez d’abord celui-ci sur le chariot, puis placez l’imprimante sur le bac.
Rangez les consommables de l’imprimante dans l’armoire et dans le tiroir.
Spegnere la stampante prima di spostarla.
Per le stampanti che utilizzano inchiostro solido ColorStix:
spegnere la stampante e attendere 30 minuti per consentire all’inchiostro di solidificarsi. In caso contrario, è possibile che si verifichino versamenti di inchiostro che potrebbero provocare danni alla stampante.
Spostare la stampante e l’unità cassetto inferiore (se installata) sempre separatamente.
Bloccare le ruote della stazione di stampa.Posizionare la stampante sul carrello: se la stampante dispone di un’unità cassetto inferiore, collocarla sul carrello
per prima
, quindi posizionare la stampante sull’unità.
Conservare i materiali di consumo della stampante nel cassetto e nell’armadio.
Schalten Sie den Drucker aus, bevor Sie ihn transportieren.
Bei Druckern mit ColorStix-Festtinte:
Schalten Sie den Drucker aus, und warten Sie 30 Minuten, bis sich die Tinte verfestigt hat. Wenn Sie dies nicht tun, treten im Inneren des Druckers Verschüttungen von Tinte auf, durch die der Drucker beschädigt werden kann.
Transportieren Sie den Drucker und die untere Papierfacheinheit (falls installiert) immer getrennnt voneinander.
Sperren Sie die Räder der Druckerstation.Setzen Sie den Drucker auf den Druckerwagen. Wenn der Drucker über eine untere Papierfacheinheit verfügt, setzen Sie diese
zuerst
auf den Wagen, und setzen Sie dann den Drucker auf die Einheit auf.
Bewahren Sie die Verbrauchsmaterialien im Schrank und im Schubfach auf.
Apague la impresora antes de moverla.
En las impresoras que utilicen tinta sólida ColorStix:
apague la impresora y espere 30 minutos hasta que se solidifique la tinta. Si no lo hace, se producirán derrames de tinta en el interior que pueden dañar la impresora.
Mueva siempre la impresora y el conjunto inferior para bandejas (si está instalado) por separado.
Bloquee las ruedas del carrito de la impresora.Coloque la impresora en el carrito: si la impresora tiene un conjunto inferior para bandejas, colóquelo
primero
sobre el carrito y, a continuación, coloque la impresora sobre el conjunto.
Guarde los suministros de la impresora en el gabinete y en el cajón.
1
0383-01
®
®
P H A S E R ® 8 4 0 P R I N T E R SC O L O R S T I X ® I N K
B L A C K
30Min.
0383-02
2 3
A/Lette
r
Transp
arency
A/Lette
r
Paper
0383-03 0383-04
R
aser
® 380
ansp
aren
cy Fi
lm
50 Sh
eets
TEKTR
ONIX
PRINT
ERS &
TEKT
RONIX
SUPP
LIES
For be
st res
ults us
e only
Tektr
onix b
rand s
upplies
in yo
ur Ph
aser
printe
r. Te
ktroni
x ass
umes
no
respon
sibility
for p
rinter
dama
ge or
malfu
nction
cause
d by t
he use
of to
ners o
r othe
r supp
lies no
t
manuf
acture
d or m
arkete
d by T
ektron
ix.
Store
in a c
ool,
dry l
ocati
on.
Keep
in cl
osed
box.
RColorS
tix® Ink
Phaser® 380
Printers
Black: 016-
1540-00
TEKTRONIX P
RINTERS & TE
KTRONIX SUP
PLIES
FORPANT
ONE
CALIBRATE
D¤
PRINTERS
RColorS
tix® Ink
Phaser® 380
Printers
Black: 016-
1540-00
TEKTRONIX P
RINTERS & TE
KTRONIX SUP
PLIES
FORPANT
ONE
CALIBRATE
D¤
PRINTERS
R
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
R
ColorStix® Ink
Phaser® 380Black: 016
R
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
R
ColorStix® Ink
Phaser® 380 P
Black: 016-154
Copyright
©
1999 by Tektronix, Inc. All rights reserved. 075-0383-AB
4
-
■
Setting Up the Printer Station
■
■
4
Turn off the printer before moving it.
For printers using ColorStix solid ink:
turn the printer off and wait 30 minutes for the ink to solidify. Failure to do so will result in internal ink spills that can damage the printer.
Always move the printer and its lower tray (if installed) assembly separately.
Lock the printer station’s wheels.Place the printer on the cart: if your printer has a lower tray assembly, place it on the cart
first
, then place the printer on the assembly.
Store printer supplies in the cabinet and drawer.
■
1
0383-01
®
®
P H A S E R ® 8 4 0 P R I N T E R SC O L O R S T I X ® I N K
B L A C K
30Min.
0383-02
2 3
A/Lette
r
Transp
arency
A/Lette
r
Paper
0383-03 0383-04
R
aser
® 380
ansp
aren
cy Fi
lm
50 Sh
eets
TEKTR
ONIX
PRINT
ERS &
TEKT
RONIX
SUPP
LIES
For be
st res
ults us
e only
Tektr
onix b
rand s
upplies
in yo
ur Ph
aser
printe
r. Te
ktroni
x ass
umes
no
respon
sibility
for p
rinter
dama
ge or
malfu
nction
cause
d by t
he use
of to
ners o
r othe
r supp
lies no
t
manuf
acture
d or m
arkete
d by T
ektron
ix.
Store
in a c
ool,
dry l
ocati
on.
Keep
in cl
osed
box.
RColorS
tix® Ink
Phaser® 380
Printers
Black: 016-
1540-00
TEKTRONIX P
RINTERS & TE
KTRONIX SUP
PLIES
FORPANT
ONE
CALIBRATE
D¤
PRINTERS
RColorS
tix® Ink
Phaser® 380
Printers
Black: 016-
1540-00
TEKTRONIX P
RINTERS & TE
KTRONIX SUP
PLIES
FORPANT
ONE
CALIBRATE
D¤
PRINTERS
R
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
R
ColorStix® Ink
Phaser® 380Black: 016
R
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
ColorStix® Ink
Phaser® 380 Printers
Black: 016-1540-00
R
ColorStix® Ink
Phaser® 380 P
Black: 016-154
ColorStix 30
ColorStix