series 176 — toolmaker's microscopes · 2019-10-12 · j-16 refer to the tm-505/510 leaflet...

J-16

Refer to the TM-505/510 leaflet (E4158) for more details.

J

TM-500SERIES 176 — Toolmaker's Microscopes

TM-505

TM-510

Angle reading

The Mitutoyo TM Series is a toolmaker's microscope well suited for measuring dimensions and angles of workpiece features. It can also be used to check the shape of screws and gears by attaching an optional reticle. The compact body makes it ideal for use on shop-floors with limited

space for measuring instruments.FEATURES•Anglemeasurementisperformedeasilyby

turning the angle scale to align the cross-hair reticle with the workpiece image.

•Illuminationintensitycanbeadjusted.

Technical DataObservation image: Erect imageOpticaltube: Monocular(diopteradjustable)

Depression angle: 30˚ Reticle: 90˚ broken cross-hair (176-126)

Anglereading: Range:360˚ Minimum reading: 6' (by vernier)

Eyepiece: 15X (176-116), View field dia.: 13mm Optional: 10X, 20X

Objective: 2X(176-138), Working distance: 67mm Optional: 5X, 10X

Total magnification: 30XTransmitted illumination •Lightsource: Tungstenbulb(24V,2W) •Functions: Withgreenfilter,Lightintensity

adjustableSurface illumination: •Lightsource: Tungstenbulb(24V,2W) •Functions: LightintensityadjustablePowersupply: 100/110/120/220/240VAC,50/60HzMass: 13.5g (14.5kg: TM-510)

J-17

J

210

391

333

391

333 210

152

207.5

240

321.5

152

207.5

152

207.5

SPECIFICATIONSModel No. TM-505 TM-510Order No. 176-811* 176-812*XY stage travel range 50 x 50mm 100 x 50mmMeasurement method Micrometer head (optional) Micrometer head (optional)Floatingfunction — —XYstagetabletopsize 152 x 152mm 240 x 152mmEffective area of table 96 x 96mm 154 x 96mmMax. workpiece height 115mm 107mmMax. stage loading 5kg 5kgRemarks — —

*TodenoteyourACpowercableaddthefollowingsuffixestotheorderNo:AforUL/CSA,CEDforCEE,CEE for BS,DforCEE,DCforCCC,E for BS, K for EK, No suffix is required for JIS/100V Note) D and EarenotcompatiblewithCE

DIMENSIONS

Optional Accessories176-115: 10X eyepiece (view field dia.: 13mm)176-116: 15Xprojectionlensset*176-117: 20X eyepiece (view field dia.: 10mm)176-139: Objective,5X(W.D.:33mm,N.A.:0.10)176-137: Objective,10X(W.D.:14mm,N.A.:0.14)164-161: Digimatic micrometer head

(range: 50mm, reading: 0.001mm)164-162: Digimatic micrometer head (range: 2”/50mm,

reading: .00005”/0.001mm)152-390: Micrometer head for X-axis

(range: 50mm, reading: 0.005mm)152-389: Micrometer head for Y-axis

(range: 50mm, reading: 0.005mm)152-391: Micrometer head for X-axis

(range: 2”, reading: .0001")152-392: Micrometer head for Y-axis

(range: 2”, reading: .0001")611635-041: Rectangular gauge block (25mm)611675-041: Rectangular gauge block (50mm)611201-241: Rectangular gauge block (1")611202-241: Rectangular gauge block (2")383038: Halogenbulb(24V,2W)176-204: Dial indicator attachment for Z-axis

measurement965013: SPCcable(2m)forDigimaticmicrometerhead

FixtureandStageaccessories990561: Workpiece clip (2pcs./set)176-106: Rotary table for TM-505 (effective dia.: 66mm)172-196: Rotary table for TM-510 (effective dia.:

100mm)176-105: Swivel center support for TM-505

(max. workpiece dia.: 70mm)172-197: Swivel center support for TM-510

(max. workpiece dia.: 80mm)172-378: V-block with clamp

(max. workpiece dia.: 25mm)176-107: Holderwithclamp

Illumination units176-366: Fiber-opticringlight176-203: Twin-bulb reflected illumination unit176-344: Bifurcated fiber illuminator

Reticles176-111: Concentriccircles (up to ø4mm, 0.05mm increment)176-135: Concentriccircle(uptoø.2",.01"increment)176-113: 55˚ angle176-114: 60˚ angle176-109: Metric screw threads (pitch = 0.25 - 1mm)176-110: Metric screw threads (pitch = 1.25 - 2mm)176-140: ISO metric screw threads

(pitch = 0.075 - 0.7mm)176-141: ISO metric screw threads (pitch = 0.75 - 2mm)176-142: ISO unified screw threads (80 - 28TPI)176-143: ISO unified screw threads (24 - 14TPI)176-144: ISO unified screw threads (13 - 10TPI)176-123: Unified screw threads (80 - 28TPI)176-124: Unified screw threads (24 - 14TPI)176-125: Unified screw threads (13 - 10TPI)176-120: Whitworth screw threads (60 - 26TPI)176-121: Whitworth screw threads (24 - 18TPI)176-122: Whitworth screw threads (16 - 11TPI)176-127: NFscrewthreads(80-28TPI)176-128: NFscrewthreads(24-14TPI)176-129: NFscrewthreads(13-10TPI))176-130: 14.5˚ involute gear teeth (normal rack type)176-112: 20˚ involute gear teeth (normal rack type)

Unit: mm

J-18

RefertotheMF/MF-Uleaflet(E4153)formoredetails.

J

Technical DataObservation image: Erect imageOptical tube (optional): Monocular or binocular tube

(depression:25˚),Reticleprojectionmethod, with TV mount, Optical path ratio (eyepiece/TV mount: 50/50)

Eyepiece lens (optional): 10X, 15X, 20XObjective: 3X(375-037), W.D.: 72.5mm

Optional: 1X, 5X 10X, 20X, 50X, 100XTransmitted illumination •Lightsource: Halogenbulb(12V,50W) •Opticalsystem: Telecentricilluminationwithadjustable

aperture diaphragms •Functions: Lightintensityadjustable,Non-

steppedbrightnessadjustmentSurfaceillumination

•Lightsource: Halogenbulb(12V,150W) •Opticalsystem: Koehlerilluminationwithadjustable

aperture diaphragms •Functions: Lightintensityadjustable,Non-stepped

brightnessadjustmentDisplayunit: •No.ofaxis: 2axes(MF-Atype)or3axes(MF-Btype) •Resolution: 0.001mm/0.0005mm/0.0001mm/

.0001" / .00005" / .00001" •Functions: Zero-setting,Directionswitching,Data

output(viaRS-232Cinterface)Powersupply: 100/110/120/220/240VAC,50/60HzMass: 65.5kg(505C,1010C)/69.5kg(2010C)/

130kg(2017C)/138kg(3017C)/ 144kg(4020C)

MF-B2017CXY stage travel range: 200 x 170mm(with optional binocular tube)

Using optional slide type nosepiece with 2-lens mount (factory set option)

Optional Reticles for 3X Eyepiece12AAG838 (12AAG878): Cross-hair(7µmwidth)12AAG836 (12AAG877): Cross-hair(5µmwidth)12AAG873 (12AAG876): Cross-hair(3µmwidth)12AAG839 (12AAG879): Cross-hairand45˚ angle12AAG840 (12AAG880): Broken cross-hair and 60˚ angle12AAG841 (12AAG881): Zeiss type chart12AAG842*: 20mm scale (0.1mm reading)12AAG843*: Concentriccircle(ø1.2-ø18mm)12AAG844*: 10mm scale (0.1mm reading)12AAG845*: 5mm scale (0.05mm reading)12AAG846*: 10x10mm section (1mm min.)12AAG847*: Metric screw thread (P = 0.25-1.0)12AAG848*: Metric screw thread (P = 1.25-2.0)12AAG849*: Involute gear tooth (14.5˚), module = 0.1 - 1.012AAG850*: Involute gear tooth (20˚), module = 0.1 - 1.012AAG851*: Unified screw thread (80 - 28TPI)12AAG852*: Unified screw thread (24 - 14TPI)12AAG853*: Unified screw thread (13 - 10TPI)12AAG854*: Concentriccircle(ø.01"-ø.2")():forMF-Umodels,*:MF/MF-Ucompatible

Reticle mount(standard accessory)

90˚ chain lineLinewidth:5µm(standard accessory)

505C: 50 x 50mm 1010C: 100 x 100mm 2010B: 200 x 100mm

Selection of XY stage by travel range

3017C: 300 x 170mm 4020C: 400 x 200mm

TheMFmeasuringmicroscopes'expandability, such as when used in combination with Mitutoyo's vision unit to boost its performance or data management onaPC,promisesfurtherimprovedmeasuring efficiency.

FEATURES•Observation with a clear and flare-less erect

image and a wide field of view•Measuring accuracy that is the highest in its

class (and conforms to JIS B 7153)•MLseries,high-NAobjectivesthatare

speciallydesignedfortheMFseries(longworking distance type)

•Illumination unit (reflected/transmitted) selectablefromahigh-intensityLEDorhalogen bulb (required)

•Variable aperture diaphragm (reflected/transmitted) allows observation measurement while suppressing light diffraction

•Varietyofstandardizedstagesinsizesupto400×200mm

•Quick-release mechanism useful for moving the stage quickly when measuring workpieces thatarelargeinsizeorquantity

•Coarse/finefeedhandlesequippedasstandard on both sides allow precise focus and observation measurement regardless of handedness

•High-magnificationeyepieceobservationupto 2000×

•Standard measuring microscope that has a wide variety of optional accessories including aVisionUnitandvariousdigitalCCDcameras

MFSERIES 176 — Measuring Microscopes

forMF-Umodels

forMFmodels

J-19

SPECIFICATIONSModelNo.(XYstagesize) 505C 1010C 2010C 2017C 3017C 4020COrder No.* MF-A 176-661* 176-662* 176-663* 176-664* 176-665* 176-666*

MF-B 176-681* 176-682* 176-683* 176-684* 176-685* 176-686*XY stage travel range 50 x 50mm 100 x 100mm 200 x 100mm 200 x 170mm 300 x 170mm 400 x 200mmZ-axis travel range 150mm 150mm 150mm 220mm 220mm 220mmFocusingmethod Manual focusing (coarse focusing: 30mm/rev., fine focusing: 0.2mm/rev.)Measurement method Linearencoder(2-axismodel:X/Y-axis,3-axismodel:X/Y/Z-axis)Resolution (switchable) 0.001mm / 0.0005mm / 0.0001mm / .0001" / .00005" / .00001"Measuringaccuracy(at20˚C) XY-aixs:(2.2+0.02L)µm,L=Measuringlength(mm)whennotloaded,JISB7153Indicationaccuracy(at20˚C) Z-axis:(5+0.04L)µm,L=Measuringlength(mm)Floatingfunction X and Y axes with Quick-release mechanismXYstagetopsize 280 x 280mm 280 x 280mm 350 x 280mm 410 x 342mm 510 x 342mm 610 x 342mmEffectiveglasssize 180 x 180mm 180 x 180mm 250 x 150mm 270 x 240mm 370 x 240mm 440 x 240mmSwiveling function — — — ±5˚ (left) ±5˚ (left) ±3˚ (left)Max. stage loading 10kg 10kg 10kg 20kg 20kg 15kgMax. workpiece height 150mm 150mm 150mm 220mm 220mm 220mm

* The following suffixes to the order No. (e.g.: 176-661-10): -10 for English User’s Manual 11forChineseuser’smanual,NosuffixisJapaneseuser’smanual

Optional Accessories176-392: Monocular tube with 10X eyepiece176-393: Binocular tube with 10X eyepiece set378-856: 10X eyepiece set (view field dia.: 24mm)378-857: 15X eyepiece set (view field dia.: 16mm)378-858: 20X eyepiece set (view field dia.: 12mm)375-043: Protractor eyepiece (10X)176-313: Digital protractor eyepiece (10X)375-036-2: 1Xobjective(W.D.:61mm,N.A.:0.03)375-037-1: 3Xobjective(W.D.:77mm,N.A.:0.09)375-034-1: 5Xobjective(W.D.:61mm,N.A.:0.13)375-039: 10Xobjective(W.D.:51mm,N.A.:0.21)375-051: 20Xobjective (W.D.:20mm,N.A.:0.42)375-052: 50Xobjective(W.D.:13mm,N.A.:0.55)375-053: 100Xobjective(W.D.:6mm,N.A.:0.7)176-314-1: Slide type nosepiece (2-mount, parfocal)176-314-2: Slidetypenosepiece(2-mount,mag.adjusted)12AAA643: ND2 color filter (transmitted / surface)12AAA644: ND8 color filter (transmitted / surface)12AAA645: GIFfilter(transmitted/surface)12AAA646: LB80colorfilter(transmitted/surface)375-054: 0.5Xcameraadapter(withC-mountadapter)970441: C-mountadapter513667: Halogenbulb(24V,50W)12BAB345:Halogenbulb(longlifetype,24V,50W)176-308: Vibration damping stand176-309: Mounting stand375-056: Stage micrometer12AAA165: Lenscleaningkit12AAA846: Footswitch

Illumination units (Refer to page J-25.)176-351-6: Oblique surface illumination unit176-367-2: LEDringilluminator176-343: Twin fiber-optics illuminator176-366: Ring fiber-optics illuminator12AAG806: GIFcolorfilter(forfiber-opticsilluminator)12AAG807: LB80colorfilter(forfiber-opticsilluminator)

FixtureandStageaccessories(RefertopageJ-15.)176-107: Holderwithclamp*172-378: V-block with clamp*

(max. workpiece dia.: 25mm)172-197: Swivel center support*

(max. workpiece dia.: 80mm)176-305: Rotary stage with fine feed knob for

505C/1010C/2010Cmodels176-306: Rotary stage with fine feed knob for

2017C/3017C/4020Cmodels*Fixturemountadapter(176-310) is required for 2010B models.Fixturemountadapter(176-304) is required for 2017B/3017B/4020B models.

QM-Data2002-D data processing unit (Refer to page J-14 for more details.)12AAA807: Connectingcableset

Focus pilot FP-05Focusassistingsystem (Refer to page J-24 for more details.)

DIMENSIONS

Unit: mm

Machine type MF-A MF-BMeasurement system X and Y-axis (2-aixs type) X, Y and Z-axis (3-axis type)

Applicable Illumination Unit

LED Halogen

Order No. 176-345* 176-347**TodenoteyourACpowercableaddthefollowingsuffixestotheorderNo.:AforUL/CSA,C for Taiwan, DforCEE, DCforCCC,E for BS, K for EK, No suffix is required for JIS/100V

Selection of machine type

Illumination Unit

Vision UnitPC-basedvisionmeasuringsystem (Refer to page J-28 for more details.)

J

79

78327

249

200

234+50 300+50

261

667

551360 120.3726.3+50

413

330

90.5

114114

249

360

261

782

305+200 452+200

247.

5

621 120.3903.3 +100

78

79

327

457.

5

330

90.5

114

J-20

J

MF-USERIES 176 — High-power Multi-function Measuring Microscopes

Polarized light observation: Observing only the filtered light that vibrates in one direction. Used for observing materials with special optical characteristics, such as mineral and liquid crystal.

Differential interference contrast (DIC) observation: Effective in detecting fine scratches and steps on the surface of metal, liquid crystal, and semiconductors.

Dark field (DF) observation:Observing only the scattered light by shutting down the directlighttotheobjectives.Thescratchesanddustthatcannot be viewed in the bright view field can be observed by this method in high-contrast.

Bright field (BF) observation:Most common method of observation. Observing directly the light reflected from the surface of the workpiece.

FEATURES•Observation with a clear and flare-less erect

image and a wide field of view•Measuring accuracy that is the highest in its

class (and conforms to JIS B 7153)•Provenhigh-NAobjectivesfromtheFSoptical

system (long working distance type)

•Integration of metallurgical and measurement microscope functions provides high-resolution observation and high-accuracy measurement solution

•Illumination unit (reflected/transmitted) selectablefromahigh-intensityLEDorhalogen bulb (required)

•Variable aperture diaphragm (reflected/transmitted) allows observation measurement while suppressing light diffraction

•Varietyofstandardizedstagesinsizesupto400 × 200 mm

•Quick-release mechanism useful for moving the stage quickly when measuring workpieces thatarelargeinsizeorquantity

•High-magnificationeyepieceobservationupto 4000X

•Low-noisedesign

Technical DataObservation image: Erect imageOptical tube: Siedentoph type (pupil distance

adjustment:51-76mm),1Xtubelens, Binocular tube (depression: 30˚), Reticleprojectionmethod,withTVmount, Optical path ratio (eyepiece/TV mount: 50/50)

Eyepiece lens: 10X (field No.: 24mm), Optional: 15X, 20X

Turret (optional): Manual or powerObjective(optional): M/BDPlanApoobjectivefrom1Xto

100X (Refer to page J-36 for more details.) Transmitted illumination •Lightsource: Halogenbulb(12V,50W) •Opticalsystem: Telecentricilluminationwith

adjustableaperturediaphragms •Functions: Lightintensityadjustable,Non-

steppedbrightnessadjustmentSurface illumination •Lightsource: Optionalhalogenilluminationunit

(fiber-optic cold light illumination) •Opticalsystem: Koehlerilluminationwithadjustable

aperture diaphragms •Functions: Lightintensityadjustable,Non-

steppedbrightnessadjustmentDisplay unit: •No.ofaxis: 2axesor3axes •Resolution: 0.001mm/0.0005mm/0.0001mm/

.0001" / .00005" / .00001" •Functions: Zero-setting,Directionswitching,

Dataoutput(viaRS-232Cinterface)Powersupply: 100/110/120/220/240VAC,50/60HzMass: 65.5kg(505C,1010C)/69.5kg(2010C)

/130kg(2017C)/138kg(3017C)/144kg(4020C)

505C: 50 x 50mm

Selection of XY stage by travel range

1010C: 100 x 100mm

2010C: 200 x 100mm

2017C: 200 x 170mm

4020C: 400 x 200mm

MF-UB3017CXY stage travel range: 300 x 170mm(withoptionalturret,objectiveandfiberillumination)

J-21

Optional Accessories378-857: 15X eyepiece set (view field dia.: 16mm)378-858: 20X eyepiece set (view field dia.: 12mm)––––––: Objective(SeepageJ-36.)378-018: Adjustable manualBFturret378-116: Adjustable powerBFturret176-211: Adjustable manualBF/DFturret378-210: Adjustable powerBF/DFturret––––––: Reticles (See page J-18.)178-092: Polarizationunit378-076: DICunitfor100X,SL80X,SL50Xobjective378-078: DICunitfor50X,SL20Xobjective378-079: DICunitfor20Xobjective378-080: DICunitfor10X,5Xobjective12AAA643: ND2 color filter12AAA644: ND8 color filter12AAA645: GIFfilter12AAA646: LB80colorfilter375-054: 0.5X camera adapter

(withC-mountadapter)970441: C-mountadapter513667: Halogenbulb(24V,50W)12BAB345: Halogenbulb(longlifetype,24V,50W)517181: Halogenbulb(24V,100W)12BAD602:Highintensityhalogenbulb(24V,100W)176-308: Vibration damping stand176-309: Mounting stand375-056: Stage micrometer12AAA165: Lenscleaningkit12AAA846: Footswitch

Illumination units (Refer to page J-25.)176-315: Halogen illumination unit (12V, 100W)176-316: Halogen illumination unit (12V, 150W)176-343: Twin fiber-optics illuminator12AAG806: GIFcolorfilter(for176-315)12AAG807: LB80colorfilter(for176-315)

FixtureandStageaccessories(RefertopageJ-15.)176-107: Holderwithclamp*172-378: V-block with clamp* (max. workpiece dia.: 25mm)172-197: Swivel center support* (max. workpiece dia.: 80mm)176-305: Rotary stage with fine feed knob for

505C/1010C/2010Cmodels176-306: Rotary stage with fine feed knob for

2017C/3017Cmodels*Fixturemountadapter(176-310) is required for 1020B models.Fixturemountadapter(176-304) is required for 1720B/1730B models.

Selection of machine type

RefertotheMF/MF-Uleaflet(E4153)formoredetails.

Applicable Illumination Unit LED Halogen Order No. 176-346* 176-348*

Note:Becausethe"GenerationCtype"doesnothaveequippedtheilluminationunit,itisnecessarytoselecttheeitherLED illuminationunitorHalogenilluminationunit.*TodenoteyourACpowercableaddthefollowingsuffixestotheorderNo.:AforUL/CSA,C for Taiwan, DforCEE,DCforCCC, E for BS, K for EK, No suffix is required for JIS/100V

Illumination Unit

J

300+50234+50

551

562

120.3

125231

356

171

726.3+50

261

199.

566

7

360

330

90.5

114114

452+200305+200621

604.

5

903.3+100120.3

247.

5

782

125

261

231356

171

360

330

90.5

114

Unit: mm

DIMENSIONS

SPECIFICATIONSModelNo.(XYstagesize) 505C 1010C 2010C 2017C 3017C 4020COrder No. MF-UA 176-667* 176-668* 176-669* 176-670* 176-671* 176-672*

MF-UB 176-687* 176-688* 176-689* 176-690* 176-691* 176-692*MF-UC 176-673* 176-674* 176-675* 176-676* 176-677* 176-678*MF-UD 176-693* 176-694* 176-695* 176-696* 176-697* 176-698*

XY stage travel range 50 x 50mm 100 x 100mm 200 x 100mm 200 x 170mm 300 x 170mm 400 x 200mmZ-axis travel range 150mm 150mm 150mm 220mm 220mm 220mmFocusingmethod Manual focusing (coarse focusing: 10mm/rev., fine focusing: 0.1mm/rev.)Measurement method Linearencoder(2-axismodel:X/Y-axis,3-axismodel:X/Y/Z-axis)Resolution (switchable) 0.001mm / 0.0005mm / 0.0001mm / .0001" / .00005" / .00001"Measuringaccuracy(at20˚C) XY-aixs:(2.2+0.02L)µm,L=Measuringlength(mm)whennotloaded,JISB7153Indicationaccuracy(at20˚C) Z-axis:(5+0.04L)µm,L=Measuringlength(mm)Floatingfunction X and Y axes with Quick-release mechanismXYstagetopsize 280 x 280mm 280 x 280mm 350 x 280mm 410 x 342mm 510 x 342mm 610 x 342mmEffectiveglasssize 180 x 180mm 180 x 180mm 250 x 150mm 270 x 240mm 370 x 240mm 440 x 240mmSwiveling function — — — ±5˚ (left) ±5˚ (left) ±3˚ (left)Max. stage loading 10kg 10kg 10kg 20kg 20kg 15kgMax. workpiece height 150mm 150mm 150mm 220mm 220mm 220mm

* The following suffixes to the order No. (e.g.: 176-667-10): -10 for English User’s Manual 11forChineseuser’smanual,NosuffixisJapaneseuser’smanual

Machine type MF-UA MF-UB MF-UC MF-UDObservation type Brightfield(BF) Brightfield(BF) Bright / Dark field

(BF/DF)Bright / Dark field (BF/DF)

Measurement system X and Y-axis (2 axes) X, Y and Z-axis (3 axes) X and Y-axis (2 axes) X, Y and Z-axis (3 axes)

J-22

RefertotheHyperMF/MF-Uleaflet(E4267)formore details.

J

Hyper MF/MF-USERIES 176 — High-Accuracy Measuring Microscopes

Hyper MF-Uwith optional optical tube, turretandobjectives

FEATURES•TheworldhighestaccuracyXYmeasuring

accuracyof(0.9+3L/1000)µm•SelectableLAF(LaserAutoFocus)function

•Highoperabilityandrepeatability•Three-axismotorizedcontrol•Power-driveautofocusunitisastandard

feature.

Technical Data: Hyper MF-UObservation image: Erect imageOptical tube: Siedentoph type (pupil distance

adjustment:51-76mm),1Xtubelens, Binocular tube (depression: 25˚), Reticleprojectionmethod,withTVmount, Optical path ratio (eyepiece/TV mount: 50/50)

Eyepiece lens: 10X (field No.: 24mm), Optional: 15X, 20X

Turret (optional): Power Objective(optional):M/BDPlanApoobjectivefrom1Xto100X(Refer to page J-36 for more details.)

Transmitted illumination •Lightsource: Halogenbulb(12V,100W) •Opticalsystem: Telecentricilluminationwithadjustable

aperture diaphragms •Functions: Lightintensityadjustable,100steps

brightnessadjustmentSurface illumination •Lightsource: Halogenbulb(12V,50W) •Opticalsystem: Koehlerilluminationwithadjustable


brightnessadjustmentDataoutput: ViaRS-232CinterfacePowersupply: 100/110/120/220/240VAC,50/60HzDimensions: 880x913x770mm (main unit)

160x476x381 (power unit)Mass: 255kg (main unit), 14kg (power unit)

Technical Data: Hyper MFObservation image: Erect imageOptical tube: Monocular or binocular tube (optional,

depression:25˚),Reticleprojectionmethod, with TV mount, Optical path ratio (eyepiece/TV mount: 50/50)

Eyepiece lens (optional): 10X, 15X, 20XObjective: 3X(375-037-1), W.D.: 77.0mm

Optional: 1X, 5X 10X, 20X, 50X, 100X

Transmitted illumination •Lightsource: Halogenbulb(12V,100W) (fiber-optic cold light illumination) •Opticalsystem: Telecentricilluminationwithadjustable


brightnessadjustmentSurface illumination •Lightsource: Halogenbulb(12V,50W) •Opticalsystem: Koehlerilluminationwithadjustable


brightnessadjustmentDataoutput: ViaRS-232CinterfacePowersupply: 100/110/120/220/240VAC,50/60HzDimensions: 880x913x730mm (main unit)

160x476x381 (power unit)Mass: 250kg (main unit), 14kg (power unit)

SPECIFICATIONSModel No. HyperMF-B2515B HyperMF-UB2515B HyperMF-UD2515B HyperMF-UE2515B HyperMF-UF2515BOrder No. (mm) 176-430* 176-431* 176-432* 176-433* 176-434*Observation type BF BF BForBF/BD BF BForBF/BDDigital counter — — — — —Laserautofocusfunction — — — Available AvailableXY stage travel range 250 x 150mm 250 x 150mm 250 x 150mm 250 x 150mm 250 x 150mmMeasuring unit Linearencoder Linearencoder Linearencoder Linearencoder LinearencoderResolution 0.01µm 0.01µm 0.01µm 0.01µm 0.01µmMeasuringaccuracy(at20˚C) (0.9+3L/1000)µm,L=XYaxismeasuringlength(mm)whennotloadedDrive system (X, Y, Z-axis) Motor-drivercontrolwiththejoystickXYstagetopsize 460 x 350mm 460 x 350mm 460 x 350mm 460 x 350mm 460 x 350mmEffectiveglasssize 300 x 200mm 300 x 200mm 300 x 200mm 300 x 200mm 300 x 200mmSwiveling function ±3˚ ±3˚ ±3˚ ±3˚ ±3˚Max. stage loading 30kg 30kg 30kg 30kg 30kgMax. workpiece height 150mm 150mm 150mm 150mm 150mm

*TodenoteyourACpowercableaddthefollowingsuffixestotheorderNo.:AforUL/CSA,C for Taiwan, DforCEE,DCforCCC,E for BS, K for EK, No suffix is required for JIS/100V

J-23

Large, Highly Accurate XY StageThe XY stage is a massive, highly stable design created using mechanical techniques developed over Mitutoyo’s long years of experience in manufacturing precision measuring microscopes. Maximum stage loading is 30kg and a range of useful fixtures is available that includes a wafer holder and swivel-center support.

LAF Optical TubeTheLAF(LaserAutoFocus)opticaltubecanbeselected.TheLAFsystemachieveshighrepeatabilitywhen measuring minute steps, etc., enabling difficult measurements with minimum fatigue.

*AvailableformodelMF-Uonly

ImagegraphicofAFoptical path

TheLAFusesalow-powerlaser that corresponds to Class2 (visible radiation)ofJISC6802/1997,SafetyofLaserProducts.

Three-axis Motor-driven JoystickThe X, Y, and Z axes are driven and controlled withonejoystickthatservesasthenervecenterofoperation. Speed control is possible from high-speed traverse of the stage to ultra low-speed, precise positioning of a workpiece.

250mm

150m

m

150mm

Highly Accurate Digital ScalesThese microscopes are equipped with highly accurate digital glass scales on all three axes. Mitutoyo produces glass scales in an underground laboratory where the temperature and humidity are constant throughout the year. The XY (stage) and Z (optical tube) displacements are displayed digitally.

J

880 913

880

Hyper MF

Hyper MF-U

913

770

730

470

262

676

262

QM-Data2002-D data processing unit (Refer to page J-26 for more details.)

Optional AccessoriesSeepageJ-19forHyperMFmodels.SeepageJ-21forHyperMF-Umodels.

Vision UnitPC-basedvisionmeasuringsystem (Refer to page J-28 for more details.)

DIMENSIONSUnit: mm

J-24

Order No. 176-211 378-018 176-210* 378-016* 378-116*Observation type BD BF BD BF BF

No. of objectivemounts

4-mount 4-mount 4-mount 4-mount 5-mount

Driving method Manual Motor

Power supply — — AC100V-240V

Dimensions (WxDxH) — —

Turret: 164x65x137ControlBox:108x72x193

*TodenoteyourAClinevoltageaddthefollowingsuffixestotheorderNo.(e.g.:176-210A): AforUL/CSA,DforCEE,E for BS, DCforChina,K for EK, C for Taiwan, No suffix is required for JIS/100V

J

Accessory for Measuring Microscope

SPECIFICATIONSOrder No. 375-056Range 1mmGraduations 0.01mmAccuracy(at20˚C) (1+L)µm,L=Measuringlength(mm)Dimensions (WxD) 76 x 26mmMass 16g

Focus Pilot FP-05FEATURES•Byinstallingthissystemonthecamera

mountofanMFseriesmeasuringmicroscopeandprojectingthefocusingchart onto the workpiece surface, the focal point can be detected with high-accuracy and high-repeatability.

•Thebrightnessofthechartcanbeadjusted.

•Awideviewfieldobservationonthemonitor is made possible with the use ofaCCDcamera(C-mountadapterisincluded.)

SPECIFICATIONSOrder No. 375-057* 375-058* 375-067* 375-068*Applicable microscopes MFCmodels MF-UCmodels

Lightsource GreenLED RedLED GreenLED RedLEDMagnification 0.5X,Accuracy:0.1%**Cameraadapter C-mount(provided)

ApplicableCCDcamera Up to 2/3-inch

Mass 1.8kg 1.8kg* TodenoteyourACpowercableaddthefollowingsuffixestotheorderNo.: AforUL/CSA,C for Taiwan, DforCEE,DCforCCC,E for BS, K for EK, No suffix is required for JIS/100V** Within 2/3 area from the center of view field

Stage Micrometer

Concentriccircle

•Fourtypesofchartpatternsareavailable.The pattern should be selected in accordance with the type of workpiece surface texture.

Power Focus Unit

SPECIFICATIONS

SPECIFICATIONSOrder No. Please contact usApplicablemicroscopes MF-Cmodels,MF-UCmodelsResolution 0.4µmDrive speed 3.2mm/sPower supply 100-240VAC,50/60HzDimensions(WxDxH) Controlbox:108x72x193mm

Manual and Power Turrets

Slit

J-25

J

A

B

C

D

Twin fiber-optics illuminator Ring fiber-optics illuminator

SPECIFICATIONSOrder No. 176-366*Applicablemicroscopes MFmodelsLengthoffibercable 1000mmLightsource Halogenbulb(12V,100W)

(517181: halogen bulb)Dimensions(WxDxH) Lightunit:235x76x120mm

* TodenoteyourACpowercableaddthefollowingsuffixestotheorderNo.:A forUL/CSA,C for Taiwan, DforCEE,DCforCCC,E for BS, K for EK, No suffix is required for JIS/100V

LED Ring Illuminator LED Ring Light (for FS Objectives)

SPECIFICATIONSOrder No. 176-367-2*Applicablemicroscopes MFmodelswith1X/3X/5X/10X

objectiveLightsource WhiteLEDLengthofLEDcable 1500mm


SPECIFICATIONSOrder No. Please contact usApplicablemicroscopes MFmodelswith1X/3X/5X

objectiveLightsource Supplied from microscope

(surface illumination)

D: Twin fiber-optics illumination

C: LED Ring Illumination

B: Ring fiber-optics illumination

A: Vertical surface illumination (Halogen)

SPECIFICATIONSOrder No. 176-343*Applicablemicroscopes MF,MF-UmodelsLengthoffibercable 700mmLightsource Halogenbulb(12V,100W)

(517181: halogen bulb)Dimensions(WxDxH) Lightunit:235x76x120mm


PCB

ICpackage Garnet

Black resin molded parts

HDDsuspension PCB

Electric parts

FlexiblePCB PCB

ICcircuit

PCB HDDsuspension

J-26

J

QM-Data200SERIES 264 — 2-D Data Processing Unit

Technical DataResolution: 0.0001mmProgram functions: Part program creation, execution,

editingStatisical processing: Number of data, maximum value,

minimum value, mean value, standard deviation, range, histogram

Element memory: Maximum of 1000 elementsElement recall: Point, line, circle, distance, ellipse,

rectangular hole, slotted hole, intersection and intersecting angle

Element key-in: Point, line, circleDisplaysystem: MonographicLCD(320x240dots,

withLEDbacklight)Measurementresultfileoutput:RS-232Coutput(CSV

format,MUX-10Fformat)Displaylanguage: Japanese/English/German/French/

Italian/Spanish/Portuguese/Cheskey/Chinese(simplified/traditional),Korean

Datainput: RS-232C,X/Y/Z-axissignal,Footswitch

Dataoutput: RS-232C,Printer,Floppydiskdriveunit

Powersupply: 100VACto240VACMass: 2.9kg (stand-mount type)

2.8kg (arm-mount type)

QM-Data200Stand-mount type

• Graphic displayMeasurement information and data are visualizedontheback-litLCDdisplaywithgraphical interfaces. The geometric feature that you selected is displayed with the probing navigator. The measurements map and blink indication show you the probing points and sequences. Simply probe points and click by following the blink indicator. Measurements can be easily completed even by a beginner. This improves operation accuracy and reduces errors and time.

• Intuitive panel designThe QM-Data200 employs “Geometry Keys” to accelerate the measurement process. The probing routine of standard geometric features and combinations are designed with Geometry Keys on the front panel. Simply clicking a key and then capturing the feature coordinates means you can complete the measurement quickly and accurately. This improves operator productivity, reduces errors and save operation time and cost.

The QM-Data200 is a geometric readout/analysis unit for optical instruments such asaprofileprojectors.Thisunitfeaturespowerful 2-D coordinate measurement capabilities with easy-to-use key operation. The QM-Data200 improves operator productivity,minimizeserrorsandsavestotalmeasurement time and production cost.FEATURES•Informativegraphicdisplaysonthelarge

LCDscreenmakeforeasymeasurementoperations.

•One-keyoperationforcombinedmeasurements that are often used (circle-circle distance, etc.)

•TheAImeasurementfunction(automaticidentification of measuring item) eliminates switching between the measurement command keys.

•Equippedwithameasurementprocedureteaching function and measuring position navigation in Repeat mode.

•Theusermenufunctionallowstheusertoregister measurement commands or part programs to create custom menus.

•Tolerancezonemeasurementofdataprocessing results and various statistical processing routines for each item are available.

•Measurementresultoutputto“MS-Excel”*inspreadsheet(CSV)format.

•Themeasurementprocedureandmeasurement result can be saved, using the optional floppy disk drive unit.

•Twomodelsareavailable:astand-alonetype with tilt system and a flexible arm type that can be mounted on a Profile Projector.

QM-Data200No.: 264-145* (stand-mount type)No.: 264-146* (arm-mount type)No.: 264-149* (for Hyper MF / MF-U)

*TodenoteyourACpowercableaddthefollowingsuffixes to the order No.: AforUL/CSA,C for Taiwan, DforCEE,E for BS, No suffix is required for JIS/100V

* MicrosoftExcelisaregisteredtrademarkofMicrosoftCorporation.

Refer to the QM Data200 and Vision Unit leaflet (E4232) for more details.

J-27

J

91.5

1950

44.5 94

For FDD unit connection (USB)

Power switch

For footswitch input

For printer connection

For RS-232C output (Connected to PC)

SPC cable 936937 (1m) x2pcs.

Connecting cable D 12AAD195

Connecting cable B 12AAD193

Connecting cable C 12AAD194

MUX-10F 264-002

DMX-2 12AAD538

RS-232C cable (2m) 12AAA807

Main unit with SPC output

Main unit with RS-2322C output

KA Counter

Hyper MF/MF-U

PJ-A3000D/F, PJ-H30, MF/MF-U

PJ-A3000, PH-3515F (172-847),

PV-5110 PH-3515F

Direct connection

All profile projectors with the linear scale XY stage can be connected directly.

For stick memory connection (USB)

QM-Data200: Rear panel

Optional Accessories12AAH035: Floppydiskdriveunit(USBtype)12AAD033: Receipt printer (for 230V)12AAD034: Receipt printer (for 120V)908353: Printer paper for receipt printer12AAA804: Printer cable (2m)937179T: Footswitch172-270: Adjustablestand12AAD193: ConnectioncableB12AAD194: ConnectioncableC12AAD195: ConnectioncableD12AAD196: ConnectioncableE12AAA807: RS-232Ccable(2m)12AAG920: RS-232Ccable(3m)

SYSTEM DIAGRAM

DIMENSIONS

Optional Accessories12AAE671: DetectorattachmentA (forø250toø350mmscreenofPJ-A3000, PJ-H30,PH-3515,series)12AAE672: Detector attachment B (for ø500 to ø600mm screen of PV-5110, PV-600Aseries) Detector attachment

(optional)

OPTOEYE-200: No. 332-151The OPTOEYE-200 Image Edge Sensor eliminates human errors which may be involved in visual alignment, ensuring speedy, accurate, and consistent measurements, regardless of operator's skill.

FEATURES•OPTOEYE-200adoptsathinfiber-optic

cable for detector connection to offer easy set-up and smart operation without obstructing your vision.

•Brightanddarkbuttonsalloweasycalibration.

•OPTOEYEcanbepoweredbyQM-Data200via the connecting cable. It means that no ACadapterisrequired.

Technical DataImage detection •Directivity: Non-direction •Min. diameter: ø2mm on the screen •Min. width: 1mm on the screen •Max. moving speed: 1000mm/sApplicableillumination •Type: Surface/Contourillumination •Range: 30Luxto1500Luxonthescreen

Bright-Darkfielddifference:20LxRepeatability: 1µmincontourilluminationFunction: Creating,performing,andediting

measuring procedures

OPTOEYE-200

unit: mm

J-28

J

FEATURES•Theautomaticedge-detectiontoolsand

variousmacroiconsallowmeasurementinoneeasystep.

•Thegraphicsandmeasurementnavigationfunctionsfacilitateoperation.

•Imagedatainput/storagefunction.•MeasurementresultsareoutputtoMS-

Excel®.Thisletstheusergenerateaninspectiontableonthesamecomputer.

•Allowsthetolerancezonemeasurementofmeasurementresultsandvarioustypesofstatisticalprocessingforeachitem.

Vision UnitSERIES 359 — Vision System Retrofit for Microscopes

ThePCsystem,QSPAKsoftwareandmicroscopeareoptional.

QSPAK Measurement Window QSPAK, optional softwareFor observation/comparison of form•Templatematchingfunction•Manualpatternmatchingfunction

For simple measurement•One-clickedgedetectiontoolfunction•Smarttoolfunction•Usermacrofunction

For repeated measurement/auto- measurement•Quicknavigationfunction•Playbackfunction•Graphicfunction•Externaldataoutputfunction•Statisticalcalculationfunction

Technical DataProjectedimage: InvertedimageCameraunit •Imagesensor: 1/2"colorCMOScamera •Resolution: 0.0001mm •Dimensions: 100x58x89mm(WxDxH) •Mass: 0.4kgAdapterunit •Operatingsoftware:QSPAKVUE(optional) •Dimensions: 45x123mm •Magnification: 0.5X •Mass: 0.3kgMagnifications: 21X-210Xon19"monitorStandardaccessory: Footswitch(12AAJ088)

Vision UnitNo.: 359-737 (for MF C)No.: 359-739 (for MF-UC)

•Combinedusewiththefocuspilotprovideshigh-accuracyinheightmeasurements.(Patentpending)

•Aseriesofmeasuringoperationscanbeperformedusingjustonescreendisplay.

•Theauto-brightnesscontrolfunctionfaithfullyreproducesthetypeanddegreeofilluminationused.(ThisfunctionislimitedtotheMF/MF-Useries.)

J-29

Fiber-optic ring illuminator

CMOS camera unit QSPAK

Vision Unit

10X objective

5X objective

3X objective

1X objective

Measuring microscope (w/ XY or XYZ counter)

Calibration glass chart No. 958448

Laser printer

Foot switchNo. 12AAJ088

Adapter unit

: Optional accessory

PC(Pentium4 WindowsXP)

19" color display

Connecting cable

Multi I/O card

Focus Pilot No. 375-057*: for MF modelsNo. 375-067*: for MF-U models

*A for UL/CSA, D for CEE, E for BS, DC for China, K for EK, C for Taiwan, No suffix is required for JIS/100V

J

One-click Edge DetectionJustbyclickingthemouseneartheedgeofaworkpiece,QSPAKautomaticallyscanstheedgeanddetectsit,showingitscoordinates.Thisfunctionalsoworkswiththepointtool,boxtool,circletoolandauto-focustool.

Graphic WindowThemeasurementresultsandmeasuredelementsareplottedinthegraphicwindowinreal-time.Byusingthisfunctiontheusercancheckthecurrentmeasuringpositionataglance.Thegraphicwindowcanbeusedforgeometricalcalculation.

J-30

RefertotheFS300leaflet(E4197)formoredetails.

J

FS-300SERIES 378 — High Power Inspection Microscope

FEATURES•ThecompleteFS-300systemcanbe

composedofavarietyofcomponentsformeetingdiverseapplications.

•Availablewithorwithoutatransmitted-lightilluminator.

•Ultra-longworkingdistanceobjectivesprovideeasymanipulationofworkpieces.

•Easyswitchingbetweenbright-fieldilluminationanddark-fieldillumination.

•Optionalaccessorieswidentherangeofapplications.

FS-300withoptionalaccessories

TheFS-300isdesignedforinspectingmicro-componentssuchasICchipsandvideoheadparts.Theopticalsystemfeaturesultra-longworkingdistanceobjectives,wideviewfieldeyepieces,andindependentcorrectionforlateralchromaticaberration.

SPECIFICATIONSMainunit Observationsystem Brightfield(BF):378-320, 378-322, 378-324, 378-326

Bright/darkfield(BF/DF):378-321, 378-323, 378-325, 378-327Reflectedillumination Koehlerilluminationwithaperturediaphragm(centeringmechanism)andfieldstop

12V/100Whalogenlamp(non-steppedbrightnessadjustment)Withfiltermountingslot(2-slot)withBF/DFswitchingslide(378-321, 378-323, 378-325, 378-327only)

Transmittedillumination 12V/100Wfiberillumination(non-steppedbrightnessadjustment)withaperturediaphragm(378-323, 378-324, 378-326, 378-327only)

Focusadjustment Withconcentriccoarseandfinefocusingwheels(rightandleft)Fineadjustment:0.1mm/rev.for32mmtravelrangeCoarseadjustment:3.8mm/rev.for32mmtravelrange

Powerturret Inwardtypewith4lensmountsWorkstage Travelstroke:356x306mmwithX-/Y-axisfinefeedknobsandcoarsetravelhandleOpticaltube Type Trinoculartube(erectimage)

Fieldnumber 24Depressionangle Fixed20º:378-320, 378-321, 378-322, 378-323

Adjustable0ºto20º:378-324, 378-325, 378-326, 378-327Intermediateimagemag. 1XOpticalpassratio Siedentopftype,adjustmentrange:51-76mmPupildistance Siedentopftype,adjustmentrange:51-76mm

Eyepiece Fieldofview 10X/ø30:378-320, 378-321, 378-322, 378-32310X/ø24:378-324, 378-325, 378-326, 378-327

Applicableobjective(optional) MPlanApo,MPlanApoSL,GPlanApo:378-320, 378-322, 378-324, 378-326BDPlanApo,BDPlanApoSL:378-321, 378-323, 378-325, 378-327

Dimensions Mainunit 360x803x568.5mmWorkstage 700x400mm

Powersupply 100to240VAC,50/60HzPowerconsumption Approx.150W:378-320, 378-321, 378-324, 378-325

Approx.300W:378-322, 378-323, 378-326, 378-327Mass Approx.50kgincludingworkstage

Polarized light observation:Observingonlythefilteredlightthatvibratesinonedirection.Usedforobservingmaterialswithspecialopticalcharacteristics,suchasmineralandliquidcrystal.

Differential interference observation:Effectiveindetectingfinescratchesandstepsonthesurfaceofmetal,liquidcrystal,andsemiconductors.

Dark field observation:Observingonlythescatteredlightbyshuttingdownthedirectlighttotheobjectives.Thescratchesanddustthatcannotbeviewedinthebrightviewfieldcanbeobservedbythismethodinhigh-contrast.

Bright field observation:Mostcommonmethodofobservation.Observingdirectlythelightreflectedfromthesurfaceoftheworkpiece..

Optional Accessory378-856: 10Xeyepiece(Fieldnumber:24),2pcs./set378-857: 15Xeyepiece(Fieldnumber:16),2pcs./set378-858: 20Xeyepiece(Fieldnumber:12),2pcs./set378-851: Extra-wide10Xeyepiece(Fieldnumber:30)*378-003: Trinoculartube,1X(Erectimage)378-004: Trinoculartube,1X(Invertedimage)378-001: Trinoculartube,1X/2Xswitchable

(Erectimage)12AAA646:Colorfilter(LB80)12AAA643:Colorfilter(ND2)12AAA644:Colorfilter(ND8)12AAA645:Colorfilter(Green)378-031: Reflectedilluminationunit(Bright/darkfield)378-032: Reflectedilluminationunit(Brightfield)378-085: Lightsourceunit**378-013: Turretw/4lensmounts(B/Dfield)378-014: Turretw/4lensmounts(Brightfield)378-015: Turretw/5lensmounts(Brightfield)378-074: Polarizingunit378-075: Bright/darkfieldswitchingunit378-021: Workstage(6”x6”),Right-handedtype378-023: Workstage(8”x8”),Right-handedtype514024: Stageglassfor6”x6”workstage514025: Stageglassfor8”x8”workstage378-051: Waferholder(3”DIA.-6”DIA.)378-055: Maskholder(3”x3”)378-056: Maskholder(4”x4”)378-058: Maskholder(6”x6”)378-076: Differentialinterferencecontrastunit

(100X,SL80,SL50X)378-078: Differentialinterferencecontrastunit

(50X,SL20X)378-079: Differentialinterferencecontrastunit

(20X)378-080: Differentialinterferencecontrastunit (10X,5X)378-041: CCDcameramountadapter––––––: Objectives(SeepageJ-36)*Canbeusedwiththespecialtrinoculartube(378-001).**Lightsource:Halogenbulb(12V,50W)

J-31

J

FS-70SERIES 378 — Microscope Unit for Semiconductor Inspection

ShortbasemodelNo. FS70-S FS70-THS FS70Z-S FS70Z-THS FS70L-S FS70L-THS FS70L4-S FS70L4-THSOrder No. 378-184-2 378-184-4 378-185-2 378-185-4 378-186-2 378-186-4 378-187-2 378-187-4Focusadjustment 50mmtravelrangewithconcentriccoarse(3.8mm/rev)andfine(0.1mm/rev)focusingwheels(right/left)Image ErectimagePupildistance Siedentopftype,adjustmentrange:51-76mmFieldnumber 24Tiltangle — 0°-20° — 0°-20° — 0°-20° — 0°-20°Opticalpassratio 50/50 100/0or

0/10050/50 100/0or

0/100100/0or0/100 100/0or0/100

Protectivefilter — — Built-inlaserbeamfilter Built-inlaserbeamfilterTubelens 1X 1X-2Xzoom 1X 1XApplicablelaser — — 1064/532/355nm 532/266nmCameramount C-mount(usingoptionaladapterB) UsealaserwithTVport. C-mountreceptacle

(withgreenfilterswitch)Illuminationsystem,optional

Reflectiveilluminationforbrightfield(Koehlerillumination,withaperturediaphragm)12V100Wfiber-optics,non-steppedadjustment,lightguidelength:1.5m,powerconsumption150W

Objective,optional(forobservation)

MPlanApo,MPlanApoSL,GPlanApo

Objective,optional(forlaser-cutting)

— M/LCDPlanNIR,M/LCDPlanNUV

MPlanUV

Loading* 14.5kg 13.6kg 14.1kg 13.2kg 14.2kg 13.5kg 13.9kg 13.1kgMass(mainunit) 6.1kg 7.1kg 6.6kg 7.5kg 6.4kg 7.2kg 6.7kg 7.5kg

*Loadingonopticaltubeexcludingweightofobjectivelensesandeyepieces

SPECIFICATIONSModelNo. FS70 FS70-TH FS70Z FS70Z-TH FS70L FS70L-TH FS70L4 FS70L4-THOrder No. 378-184-1 378-184-3 378-185-1 378-185-3 378-186-1 378-186-3 378-187-1 378-187-3

FEATURES•Theopticalsystemthatwasoriginally

developedforthebest-sellingFS60modelswasfurtherenhancedfortheFS70models.Itisidealasthemicroscopeunitofaproberstationforsemiconductors.(AllmodelsCEmarked.)

•TheFS70LsupportsthreetypesofYAGlaserwavelengthranges(1064nm,532nmand355nm),whiletheFS70L4supportstwotypesofwavelengthranges(532nmand266nm),thusexpandingthescopeoflaserapplications,allowinglaser-cuttingofthin-filmsusedinsemiconductorsandliquidcrystalsubstrates.However,Mitutoyoassumesnoresponsibilitywhateverfortheperformanceand/orsafetyofthelasersystemusedwithMitutoyomicroscopes.Acarefulexaminationisrecommendedinselectingalaser-emissionunit.

•Brightfield,DifferentialInterferenceContrast(DIC)andpolarizedobservationsarestandardwiththeFS70Z.TheFS70LandFS70L4donotsupporttheDICmethod.

•Byemployinganinwardturret,thelongworkingdistanceobjectivesprovideexcellentoperability.

•Anergonomicdesignwithsuperboperability:theFS70employstheerect-imageopticalsystem(theimageinthefieldofviewhasthesameorientationasthespecimen)andenlargedfinefocusadjustmentwheelwithrubbergripcoarse-adjustmentknob.

FS70Z FS70L FS70L4

Technical DataFocusadjustment •Method: Withconcentriccoarseandfine

focusingwheels(rightandleft) •Range: 50mmtravelrange

0.1mm/rev.forfineadjustment,3.8mm/rev.forcoarseadjustment

TrinoculartubeImage: ErectimagePupildistance: Siedentopftype,

adjustmentrange:51-76mmFieldnumber: 24Tiltangle: 0º-20º(only-TH,-THSmodels)Illuminationsystem: Reflectiveilluminationforbrightfield

(Koehlerillumination,withaperturediaphragm)

Lightsource: 12V100Wfiber-optics,non-steppedadjustment,lightguidelength1.5m,powerconsumption150W

Objectives(optional): MPlanApo,MPlanApoSL,GPlanApo

RefertotheMicroscopeUnitsleaflet(E4191)formoredetails.

J-32

J

VMU-V

VMUSERIES 378 — Video Microscope Unit

Selection Guide to System ConfigurationOrder No.(Dependsoneachsystemconfiguration)

378-505378-506378-513378-514

VerticalCCDcameramount l l l

HorizontalCCDcameramount l

YAGlasermount l l

Fiber-opticilluminationunit l l

MPlanApo,MPlanApoSL,GPlanApoobjectivesforbrightfieldobservation s s s s

MPlanApoNIR,LCDPlanApoNIR,MPlanApoNUVandLCDPlanApoNUVobjectivesforlasercutting

s

MPlanUVobjectivesforlasermachining s

l:Provided,s:Availableasoptionalaccessory

TheVMUisacompact,lightweight,andeasy-to-installmicroscopeunitforCCDcameramonitoringinsemiconductorfabricationfacilities.

SPECIFICATIONSMaginificationoftube 1XApplicablewavelength

378-505,378-506

Near-infraredandvisibleradiation

378-513 Near-infrared—visible—near-ultravioletradiation

378-514 VisibleandultravioletradiationObjective (Optional)Reflectedillumination •Telecentricsystemwithaperture

stopsystem•Fiber-opticilluminator(optional)

isrequired.Lightsource Halogenbulb(21V,150W)

(optional)Mass 378-505:570g

378-506:590g378-513:1270g378-514:1300g

FEATURES•Theopticalsystemfeaturesultra-

longworkingdistanceobjectivesandcorrectionforthewiderangeofradiationwavelengthsinuse.

•Thefiber-opticreflectedilluminationkeepstheworkpiecefreefromthermalexpansion.Thefiber-opticilluminatorisrequiredforthelightsource.

•Alsoavailablewithalasermountorturret(objectivemount).

VMU-H

VMU-LB VMU-L4B


J-33

J


EyepiecesSERIES 378

FEATURES•Thefieldofviewisextrawide.•Optionalreticlesareavailable.

ObjectivesSERIES 378

TheMitutoyo378Seriesobjectiveshavetheworld'slongestworkingdistanceandaninfinitycorrectionopticalsystem.Theseob-jectivesprovideflexibleobservationathighmagnificationsandindependentcorrectionofchromaticaberration.

FEATURES•Thelongworkingdistancetypeobjectives

provideexcellentclearancebetweenthelenssurfaceandtheworkpiecesurfaceinfocus,makingitpossibletoobserveworkpieceswhichareusuallyhard-to-focusbecauseofawkwardprojections.

378-858378-857378-856

M Plan Apo and M Plan Apo SL objectives for bright field observation

BD Plan Apo and BD Plan Apo SL objectives for bright/dark field observation

Near-infrared radiation corrected M Plan Apo NIR objectives

Near-ultraviolet radiation corrected M Plan Apo NUV objectives

Ultraviolet radiation corrected M Plan UV objectives

Reticles (optional)516848: Cross-hair516576: Brokencrosshair(90ºand60º)516578: Concentriccircle (Diametricincrement:1.2mm)516577: 20mmscale (Minimumreading:0.1mm)withcrosshair516849: 10mmscale(Minimumreading:0.1mm)516850: 5mmscale(Minimumreading:0.05mm)516851: 10x10mmsection (Minimumsection:1x1mm)

SPECIFICATIONSOrder No.(2pcs.set)

Magnifi-cation

Fieldnumber

Mass IndividualorderNo.

378-856 10X 24 85g 378-856-5378-857 15X 16 40g 378-857-5378-858 20X 12 55g 378-858-8


•Themetallurgicalplanapochromatic(MPlanApo)objectiveisanexcellentopticalsystem.Thisobjectiveprovidesaflat,chromaticaberration-freeimagethroughoutthefieldofview,makingitissuitableforanytypeofmicroscope.

•Speciallydesignedobjectivesarealsoavailablewithcorrectionfornear-infraredradiation,near-ultravioletradiation,andultravioletradiation,orvariousthicknessesofLCDscreenglasses.

•ThemountingscrewthreadsofobjectivesaredesignedtoconformtoJISB-7141-1988.

J-34

33.5 (W.D.)

ø34

ø24

ø25

61.595

(Parfocal distance)5

2.2

ø32.

2

378-803-3

11 (W.D.) 1/4 wavelength filter

ø34

ø38

ø41

8495

(Parfocal distance)5 378-800-3

20 (W.D.)ø3

4

ø23.

8ø2

5.2

7595


4.4

ø32.

2

378-804-3

34 (W.D.)

ø34

ø24.

5ø2

7.5

6195


1.6

ø32.

2

378-801-6

13 (W.D.)

ø34

ø21.

5ø2

5.2

8295


4.6

ø32.

2

378-805-3

34 (W.D.)

ø34

ø22

ø25

6195


1.6

ø32.

2

378-802-6

378-807-3

6 (W.D.)

ø34

ø17

ø25.

2

8995


4.5

ø32.

2

378-806-6

35 (W.D.)

95(Parfocal distance)

ø34

ø22

ø25

605

1.6

ø32.

2

30.5 (W.D.)

ø34

ø23.

47

ø25.

2

64.5 95

(Parfocal distance) 5

1.2

ø32.

2

20.5 (W.D.)

ø34

ø24.

2 ø2

5.2

74.5 95


3.9

ø32.

2

15 (W.D.)

ø34

ø21.

6 ø2

5.2

80 95


2.5

ø32.

2

ø39

82 95


13 (W.D.) 0.5

ø27.

3

ø37

ø29.

4

13 (W.D.)

ø34

ø22

ø25.

2

82 95


4.4

ø32.

2

378-812-3378-810-3

378-813-3 378-816-3378-811-3

80

(W.D)15

5 95(Parfocal distance)

ø39

ø37

ø26

5.2

ø34

ø19

89.895


1

ø32.

2

(W.D)1.3

ø34

ø10.4

93.795


1.2

ø32.

2

(W.D)

378-788-4 378-814-4 378-815-4

J

M Plan Apo for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-800-3 1X 0.025 11.0mm 200mm 11.0µm 440µm ø24mm 4.8x6.4mm 300g378-801-6 2X 0.055 34.0mm 100mm 5.0µm 91µm ø12mm 2.4x3.2mm 220g378-802-6 5X 0.14 34.0mm 40mm 2.0µm 14.0µm ø4.8mm 0.96x1.28mm 240g378-807-3 7.5X 0.21 35.0mm 26.67mm 1.3µm 6.2µm ø3.6mm 0.64x0.85mm 240g378-803-3 10X 0.28 33.5mm 20mm 1.0µm 3.5µm ø2.4mm 0.48x0.64mm 230g378-804-3 20X 0.42 20.0mm 10mm 0.7µm 1.6µm ø1.2mm 0.24x0.32mm 270g378-805-3 50X 0.55 13.0mm 4mm 0.5µm 0.9µm ø0.48mm 0.10x0.13mm 290g378-806-3 100X 0.70 6.0mm 2mm 0.4µm 0.6µm ø0.24mm 0.05x0.06mm 320g

M Plan Apo SL for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-810-3 20X 0.28 30.5mm 10mm 1.0µm 3.5µm ø1.2mm 0.24x0.32mm 240g378-811-3 50X 0.42 20.5mm 4mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 280g378-812-3 80X 0.50 15.0mm 2.5mm 0.6µm 1.1µm ø0.3mm 0.06x0.08mm 280g378-813-3 100X 0.55 13.0mm 2mm 0.5µm 0.9µm ø0.24mm 0.05x0.06mm 290g378-816-3 200X 0.62 13.0mm 1mm 0.4µm 0.7µm ø0.12mm 0.025x0.03mm 490g

Note:Polarizingunit(378-074)isrequiredwhenusing1Xobjective.

Note:Theseobjectivesofferextra-longworkingdistance.

M Plan Apo HR for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-788-4 10X 0.42 15mm 20mm 0.7µm 1.6µm ø2.4mm 0.48x0.64mm 460g378-814-4 50X 0.75 5.2mm 4mm 0.4µm 0.49µm ø0.48mm 0.10x0.13mm 400g378-815-4 100X 0.90 1.3mm 2mm 0.3µm 0.34µm ø0.24mm 0.05x0.06mm 410g

Note:Theseobjectivesofferextra-highresolvingpower.

DIMENSIONSUnit:mm

DIMENSIONS

Unit:mm

DIMENSIONS

Unit:mm

Mag.: MagnificationN.A.: NumericalapertureW.D.: Workingdistancef: FocaldistanceR: ResolvingpowerD.F.: FocaldepthViewfield1: Fieldofviewwhenusingø24mmeyepieceViewfield2: Fieldofviewwhenusing1/2”CCDcamera

J-35

378-847

15.08 (W.D.)

ø34

ø23

ø25

80 96.19 5

1.6 Glass

ø32.

2

378-848-3

30.6 (W.D.)

ø34

ø23

ø25

65.59 96.19 5

1.58 Glass

ø32.

2

378-833-7

34(W.D)

ø44

ø37

ø40

6195


4

ø42

378-831-7

34(W.D)

ø44

ø37

ø40

6195


4

ø42

378-832-7

34(W.D)

ø44

ø37

ø40

6195


4

ø42

378-830-7

34(W.D)

ø44

ø37

ø40

6195


4

ø42

378-834-7

20(W.D)

ø44

ø32

ø40

7595


7

ø42

378-835-7

13(W.D)

ø44

ø32

ø40

8295


7

ø42

378-836-7

6(W.D)

ø44

ø31.

5ø4

0

8995


8.5

ø42

378-841-5 378-843-5

378-840-5 378-842-5

30.5(W.D.)

ø44

ø31

ø40

64.595


7.5

ø42

20(W.D.)

ø44

ø32

ø40

7595


8

ø42

13(W.D.)

ø44

ø32

ø40

8295


8.5

ø42

13(W.D.)

ø44

ø32

ø40

8295


8.5

ø42

J

Glass Thickness (t = 3.5mm) Corrected G Plan Apo for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-847 20X 0.28 29.42mm* 10mm 1.0µm 3.5µm ø1.2mm 0.24x0.32mm 270g378-848-3 50X 0.50 13.89mm* 4mm 0.6µm 1.1µm ø0.48mm 0.10x0.13mm 320g

*Inair

BD Plan Apo for Bright/Dark Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-831-7 2X 0.055 34.0mm 100mm 5.0µm 91µm ø12mm 2.4x3.2mm 340g378-832-7 5X 0.14 34.0mm 40mm 2.0µm 14.0µm ø4.8mm 0.96x1.28mm 350g378-830-7 7.5X 0.21 34.0mm 26.67mm 1.3µm 6.2µm ø3.6mm 0.64x0.85mm 350g378-833-7 10X 0.28 34.0mm 20mm 1.0µm 3.5µm ø2.4mm 0.48x0.64mm 350g378-834-7 20X 0.42 20.0mm 10mm 0.7µm 1.6µm ø1.2mm 0.24x0.32mm 400g378-835-7 50X 0.55 13.0mm 4mm 0.5µm 0.9µm ø0.48mm 0.10x0.13mm 440g378-836-7 100X 0.70 6.0mm 2mm 0.4µm 0.6µm ø0.24mm 0.05x0.06mm 460g

BD Plan Apo SL for Bright/Dark Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-840-7 20X 0.28 30.5mm 10mm 1.0µm 3.5µm ø1.2mm 0.24x0.32mm 350g378-841-7 50X 0.42 20.0mm 4mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 410g378-842-7 80X 0.50 13.0mm 2.5mm 0.6µm 1.1µm ø0.3mm 0.06x0.08mm 430g378-843-7 100X 0.55 13.0mm 2mm 0.5µm 0.9µm ø0.24mm 0.05x0.06mm 440g

Note:TheGPlanApoSeriesaredesignedforobservingaworkpiecethroughglass(thickness=3.5mm).

Note:Theseobjectivesofferextra-longworkingdistance.

DIMENSIONSUnit:mm

DIMENSIONS

Unit:mm

DIMENSIONS

Unit:mm


J-36

378-845 378-846

5.2(W.D.)

ø44

ø32

ø40

89.995


4.8ø4

21.3(W.D.)

ø44

ø32

ø40

93.795


4.7

ø42

37.5 (W.D.)

ø34

ø24.

6

ø25

57.5 95


0.4

ø32.

2

30.5 (W.D.)

ø34

ø24.

6

ø25.

2

64.5 95


1

ø32.

2

20 (W.D.)

ø34

ø24.

4

ø24.

8

75 95


0.6

ø32.

2

17 (W.D.)

ø34

ø24.

4

ø25

78 95


0.4

ø32.

2

12 (W.D.)

ø34

ø24.

6

ø25

83 95


0.5

ø32.

2

378-822-5 378-824-5

378-823-5 378-825-5

378-826-5

378-817-4

378-809-5 378-818-4

378-819-4

15(W.D.)

ø34

ø24.

4

ø25

8095


2.6

ø32.

2

17(W.D.)ø34

ø24

ø25

7895


1.6

ø32.

2

11(W.D.)

ø34

ø23.

4

ø24.

4

8495


1.7

ø32.

2

ø34

64.595


30.5(W.D.)0.5

ø25.

2ø3

2.2

J

BD Plan Apo HR for Bright/Dark Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-845-7 50X 0.75 5.2mm 4mm 0.4µm 0.49µm ø0.48mm 0.10x0.13mm 530g378-846-7 100X 0.90 1.3mm 2mm 0.3µm 0.34µm ø0.24mm 0.05x0.06mm 545g

Note:Theseobjectivesofferextra-highresolvingpower.

Near-infrared Radiation Corrected M Plan Apo NIR for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-822-5 5X 0.14 37.5mm 40mm 2.0µm 14.0µm ø4.8mm 0.96x1.28mm 220g378-823-5 10X 0.26 30.5mm 20mm 1.1µm 4.1µm ø2.4mm 0.48x0.64mm 250g378-824-5 20X 0.40 20.0mm 10mm 0.7µm 1.7µm ø1.2mm 0.24x0.32mm 300g378-825-5 50X 0.42 17.0mm 4mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 315g378-826-5 100X 0.50 12.0mm 2mm 0.6µm 1.1µm ø0.24mm 0.05x0.06mm 335g378-863-5 50X 0.65 10mm 4mm 0.42µm 0.65µm ø0.48mm 0.10x0.13mm 450g378-864-5 100X 0.70 10mm 2mm 0.39µm 0.56µm ø0.24mm 0.05x0.06mm 450g

Note:Theseobjectivesaredesignedsothataworkpiece'simagecanbefocusedwithinthefocaldepthevenwhenthewavelengthusedischangedanywherefromthevisiblerange(l=480nm)uptonear-infraredrange(l=1800nm).ThereforetheMPlanNIRSeriesaresuitableforlaserrepair.However,whenthewavelengthusedexceeds1100nm,thefocussingpositionmayslightlydeviatefromthatinthevisiblerangeduetochangesinglassdispersionandrefractiveindex.

Near-ultraviolet Radiation Corrected M Plan Apo NUV for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 -378-809-5 10X 0.28 30.5mm 20mm 1µm 3.5µm ø2.4mm 0.48x0.64mm 255g378-817-4 20X 0.40 17.0mm 10mm 0.7µm 1.7µm ø1.2mm 0.24x0.32mm 340g378-818-4 50X 0.42 15.0mm 4mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 350g378-819-4 100X 0.50 11.0mm 2mm 0.6µm 1.1µm ø0.24mm 0.05x0.06mm 380g378-888-4 50X 0.65 10.00mm 4mm 0.42µm 0.65µm ø0.48mm 0.10x0.13mm 500g

Note:Theseobjectivesaredesignedsothataworkpiece'simagecanbefocusedwithinthefocaldepthevenwhenthewavelengthusedischangedanywherefromthevisiblerange(l=620nm)tothenear-ultravioletrange(l=355nm).ThereforeTheMPlanNUVSeriesaresuitableforlaserrepairusingahighfrequencylaserbeam.

DIMENSIONS Unit:mm

DIMENSIONS

Unit:mm

DIMENSIONSUnit:mm


J-37

15 (W.D.)

ø34

ø24.

4 ø2

5

80.24 95.24


2.6

ø32.

2

378-820-4

11.4(W.D.)

ø34

ø23.

4ø2

4.4

83.9795.37


1.5

ø32.

2378-751-4

12 (W.D.)

ø34

8395


ø32.

2

378-838-5

10 (W.D.)

ø34

8595


ø32.

2

378-839-5

15 (W.D.)

ø34

8095


ø32.

2

378-837-5

15 (W.D.)

ø34

7595


ø32.

2

378-844-5

20.35 (W.D.)

ø34

ø24.

6

ø25

74.94 95.37


0.6

ø32.

2

17.5 (W.D.) 17.5 (W.D.)

ø34

ø24.

4

ø25

77.87 95.37


0.5

ø32.

2

ø34

ø24.

4

ø25

77.74 95.24


0.5

ø32.

2

378-827-4 378-828-5 378-829-5

JNear-ultraviolet Radiation and LCD Glass Thickness (t = 0.7mm) Corrected LCD Plan Apo NUV for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-820-4 50X 0.42 14.76mm* 4mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 310g378-753-4 50X 0.42 14.53mm 4mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 310g378-751-4 100X 0.50 11.03mm 2mm 0.6µm 1.1µm ø0.24mm 0.05x0.06mm 380g

*Inair

Ultraviolet Radiation Corrected M Plan UV for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-844-5 10X 0.25 20mm 20mm 1.1µm 4.4µm ø2.4mm 0.48x0.64mm 310g378-837-5 20X 0.36 15.0mm 10mm 0.8µm 2.1µm ø1.2mm 0.24x0.32mm 330g378-838-5 50X 0.40 12.0mm 4mm 0.7µm 1.7µm ø0.48mm 0.10x0.13mm 400g378-839-5 80X 0.55 10.0mm 2.5mm 0.5µm 0.9µm ø0.3mm 0.06x0.08mm 380g

Near-Infrared Radiation and LCD Glass Thickness (t = 1.1mm or 0.7mm) Corrected LCD Plan Apo NIR for Bright Field ObservationOrder No. Mag. N.A. W.D. f R D.F. Viewfield1 Viewfield2 Mass378-827-5 20X 0.40 19.98mm* 10mm 0.7µm 1.7µm ø1.2mm 0.24x0.32mm 305g378-828-5 50X 0.42 17.13mm* 3.9mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 320g378-829-5 50X 0.42 17.26mm* 3.9mm 0.7µm 1.6µm ø0.48mm 0.10x0.13mm 320g378-752-5 100X 0.50 12.13mm* 2mm 0.6µm 1.1µm ø0.24mm 0.05x0.06mm 335g378-754-5 100X 0.50 11.76mm* 2mm 0.6µm 1.1µm ø0.24mm 0.05x0.06mm 335g

*Inair

Note:Thesenear-infrared(l=1800nm)correctedobjectivesaredesignedforobservingaworkpiecethroughLCDglass(thickness=1.1mm(378-827-4,378-828-5)or0.7mm(378-829-5,378-754-5))andforlaserrepair.

Note:Thesenear-infrared(l=1800nm)correctedobjectivesaredesignedforobservingaworkpiecethroughLCDglass(thickness=1.1mm(378-827-4,378-828-5)or0.7mm(378-829-5,378-754-5))andforlaserrepair.

Note:Theseultravioletcorrectedobjectivesaredesignedsothataworkpiece'simagecanbefocusedwithinthefocaldepthevenwhenthewavelengthusedischangedanywherefromthevisiblerange(l=550nm)totheultravioletrange(l=266nm).ThereforetheMPlanUVSeriesaresuitableforlaserrepairusingahighfrequencylaserbeam.

DIMENSIONS Unit:mm

DIMENSIONS

Unit:mm

DIMENSIONS

Unit:mm


J-38

MSM-Z475T

J

MSM-412

ModelNo. MSM-412 MSM-Z414 MSM-Z475 MSM-Z475T MSM-465Order No. 377-925 377-945* 377-975* 377-985* 377-965*Opticalsystem Greenough'stype GalileantypeTotalmagnification 10X,20X 10Xto40X 7.5Xto50X 6X,12X,25X,50XOpticaltub Binocular Binocular Binocular Trinocular BinocularPupildistance(adjustable) 54-76mm 54-76mm 52-79mm 54-76mm

Eyepiece(optional)WF5X/22,WF10X/20(standard),WF15X/13,WF20X/10

WF5X/22,WF10X/20(standard),WF15X/13,WF20X/10

WF10X/23(standard),WF5X/23,WF6.25X/23,WF15X/17,WF20X/13,WF32X/8

WF6.25X/23,WF10X/23(standard),WF15X/17.6,F20X/13.4,WF32X/10

Objective 1X,2X(turret) 1Xto4X(zoom) 0.75Xto5X(zoom) 1.2X,2.5X,5X(turret)Auxiliaryobjective(optional) — 0.5X,0.75X,1.5X 0.5X,0.63X,1.5X,2X 0.6X,1.2X,2.5X,5X

Totalmagnification 2.5Xto60X 2.5Xto120X 1.87Xto320X 3.75Xto320XWorkingdistanceofobjective 95mm 80mm 113mm 89mm

Focusingtravel 44mm 44mm 50mm 50mmMaximumworkpieceheight 93mm 95mm 130mm 95mm*

Workstagesize ø95mm ø95mm ø95mm ø95mmDimensions 151x285x343mm 151x285x343mm 151x285x343mm 151x285x343mm

Mass 4.9kg(377-925B)4.7kg

5.3kg(377-945B)5.1kg 5.3kg 5.4kg 4.8kg(377-965B)

6.3kg*TodenoteyourACpowercableaddthefollowingsuffixestotheorderNo.:AforUL/CSA,CforTaiwan,DforCEE,DCforCCC,EforBS,KforEK,No suffixis requiredforJIS/100V

MSM-400SERIES 377 — Stereo Microscopes

FEATURES•Bright,sharpimageswithrealdepth

areproducedwithhighresolutionandexcellentfaithfulnesstocolor,thusminimizingeyefatiguewhileincreasinginspectionefficiencyandproductivity.

•TheMSMseriesprovidesafullrangeofadvancedfunctionsatanaffordableprice.

•User-friendlyturrettypes(MSM-412,MSM-465)andazoomtype(MSM-Z414)areavailable.

•Continuouszooming,astandardfeature,allowsyoutoenlargetheobjectby10to40timesintotalmagnification.

MSM-Z414

MSM-465

•MSMseriescanbeconnectedtoadigitalcameraorCCDcameratosavecapturedimagesoftheobjectorforsimultaneousobservationthroughdifferentmedia.

•Theextendeddepthoffocus,longworkingdistanceandwidefieldofviewincreaseworkefficiency.Thesystemisidealforinspectingvariousobjectssuchaselectroniccomponents,metalcomponents,plants,mineralcompositionsandbiologicalcells.

•Variousattachmentsexpandapplicationsanduse.ExtendedMSMunitscanbeusedforappearanceinspections,onprocessinglines,insideinspectionsystemsorinteachingenvironments.

SPECIFICATIONS

J-39

MSM-412

10545°

291/

252.

5*

238.

589

55.5

17

383/

344.

5*

50

160190

280

100

ø32

ø58

330

170

MSM-Z414

MSM-465 MSM-Z475

140

239

149

79 25

9525

308

131

181

280

ø45

220

101

ø25

ø69

ø74ø9545°

239

2530

8

131

181

280

130

220

101

141

200

75

25

80

ø60

ø25

ø72

ø7445°

35° ø41

1793

32

322

330

113

351

174

160189

168 ø32

280

ø66

ø75

ø76

J

DIMENSIONS

MSM-465 MSM-Z414

Optional LensesFor MSM-412, Z414

6.25X/23eyepiece:377-066

15X/13eyepiece:377-028


For MSM-465

0.5XAuxiliaryobjective377-045



15X/17.6eyepiece:377-067

20X/13.4eyepiece:377-068




2XAuxiliaryobjective377-078


Unit:mm

J-40

SPECIFICATIONSMagnification Order No. Remarks25X 183-201 Pentype

183-202 Withstand50X 183-203 Withstand

J

Pocket MagnifiersSERIES 183

FEATURES•Suitableforinspectingmetalsurfaces.

Zoom loupeSERIES 183

FEATURES•Allowstheuser8X-16Xzoom

observation.•Magnificationindicatorisprovidedfor8X,

10X,12X,14X,and16Xobservation.•Metricandinchscalesareprovidedfor

measuring.•Comeswithacarryingcase.

Pocket ComparatorsSERIES 183

183-304 Reticle provided

FEATURES•Byreplacingoptionalreticles,dimensional,

angle,andothertypesofmeasurementcanbeperformed.

•Anoptionalilluminator(950757)isavailable.

Clear LoupeSERIES 183

SPECIFICATIONSMagnification Order No. Remarks8X 183-304 Withreticles(Scale

graduation:0.1mm,.005")

Optional illuminator(950757)

183-101

SPECIFICATIONSMagnification Order No. Remarks8X 183-101 Optionalreticlesavailable9X 183-121 Optionalreticlesavailable10X 183-131 Optionalreticlesavailable

183-301 183-302 183-303

SPECIFICATIONSMagnification Order No. Remarks7X 183-301 Drawtuberemovable10X 183-302 Drawtuberemovable15X 183-303 Drawtuberemovable

Optional Reticles for pocket comparators

183-102 183-103 183-104

183-201

183-202

183-203

183-105 183-106 183-107

183-108 183-109 183-110

183-111 183-112 183-113

183-114 183-115

series 176 — toolmaker's microscopes · 2019-10-12 · j-16 refer to the tm-505/510 leaflet...

Documents