school of mechanical engineering machine shop
TRANSCRIPT
School of Mechanical Engineering
Department of Manufacturing Engineering
MACHINE SHOP
Machine Shop is a place where students acquire knowledge on the operation of various processes involved in manufacturing and production. The Manufacturing Processes and Machining Process and Metrology courses makes students competent in handling practical work in engineering environment. Mechanical Engineering Workshop is also involved in different maintenance/repair works
for University.
Central fabrication facility is a place where students acquire knowledge on the operation of
various processes involved in manufacturing and production. The Manufacturing Processes
and Machining Process and Metrology courses makes students competent in handling
practical work in engineering environment.
Mechanical Engineering Workshop is also involved in different maintenance/repair works
for University
Lab In-Charge : Prof. RAJYALAKSHMI.G
Faculty associated with the lab
Name of the Faculty Photo Area of Expertise
Prof. Anthony Xavior. M
Manufacturing Process, Metal cutting, Powder Metallurgy
Prof. Kuppan. P
Advanced Machining Process, Laser processing of materials
Dr.Jeevanantham A.K.
Workability, Densification and Strain-hardening behavior of sintered Powder Metallurgy compacts. Two-dimensional and Three-dimensional tolerance analysis models for high precision assemblies.
Prof. Pandivelan.C
Metal forming , Incremental forming
Prof. Venkateswarlu. B
Engineering Metrology and Precision Engineering, Advanced Manufacturing, Non-Conventional Machining
Prof. Ramanujam.R
Machining Process, Additive Manufacturing
Prof. Sampath Kumar.T
Metal Cutting, Micro machining, Composite machining, Additive manufacturing
Prof. Muralidharan.B
Advanced Machining, Micro and nano Machining
Dr.Chinmaya Prasad Mohanty
Cryogenic Machining,Optimization Techniques, Composite materials, solar energy
Prof. Anoj Giri
Residual stress measurement, FEM analysis, Material joining, Arc
welding
Prof. Jeyapandiarajan
Welding, Metallurgy, Corrosion Engineering
Prof. Joel.J
Manufacturing, Metallurgy, Foundry
Prof. Sri Nagalakshmi Nammi
Laser Machining
Staff In-Charge: Mr. Mohan. S
EQUIPMENT
Lathe Machine Milling Machine Surface Grinding Machine Drilling Machine Radial Drilling Machine Tool and Cutter Grinder Bench Grinder Shaper Slotting Machine Angle Cutter
School of Mechanical Engineering Department of Manufacturing Engineering
MACHINE SHOP
MAJOR FACILITIES AVAILABLE
List of Equipment / Instrument /Software Tools (Whichever applicable)
Name of the Equipment Number Make and Model Cost (Lakhs Rs.)
M.K.make All Geared Lathe –Enterprise 1330
1 No Batliboi & Co, Madras
1.3585638
Batliboi-Shaping Machine Model: BSH 63
2 No Batliboi & Co, Madras
1.62510
M.K.make Power Hacksaw Machine Model: Cobra 9
1 No Batliboi & Co, Madras
0.227026
Batlibio FA3U Universal Milling M/c
1 No Batliboi & Co, Madras
2.73120
HMC/SURAJ Geared Head Universal Milling Machine
1 No HMC- Bangalore SM-2
1.21100
AVRO- Surface Grinder
1 No Shenoy &Co. Madras
0.334522
SAGAR-Heavy duty Belt driven Planning Machine
1 No Shenoy &Co. Madras
1.43488
Batliboi – Pedestal Grinder Model – DD16
1 No Batliboi & Co, Madras
1.131350
EIFCO-Bench Grinder 1 No Batliboi & Co, 0.02208.00
Turnmaster-35 All Geared Head Lathe
7 No.’s MKL-Hubli Karnataka
1.2021350
Turnmaster-40 All Geared Head Lathe
1 No MKL-Hubli Karnataka
1.9989420
EIFCO make Gear Hobber
1 No United Engg. Works Chennai
8.76720
Eifco – Slotting Machine
1 No Eifco Sales agencies-Coimbatore
0.99648
Eifco – Slotting Machine
1 No Eifco Sales agencies-Coimbatore
1.54380
EIFCO Radial Drilling Machine Model: RDH 325
1 No Eifco Sales agencies-Coimbatore
0.51503
Tool and Cutter Grinder
1 No HMC-Banglore 0.61145
Tool and Cutter Grinder (SG3)
1 No Batliboi & Co, Madras
3.37760
Lathe tool Dynamometer (6210)
2 No IEI-Bangalore 0.95413
Hydraulic Surface Grinding Machine
1 No PRAGA Tools LTD Secandrabad
4.64306
Vertical Ram Turret Milling machine
1 No S&T Engg. Coimbatore
4.32037
Batliboi make Radial Drilling Machine (BR-515)
1 No Batliboi & Co, Surat 5.92310
Syscon Lathe Tool Dynamometer
1 No Syscon Bangalore
1.41411
Banka Lathe
2 No S&T Engg. Coimbatore
3.81000
Geede Lathe 2 No GEDEE WEILER 11.09010
Small Angle Grinder 1 No HMS-vellore 0.04870
CNC Advanced Micro Machining Station
1 No INTERFACE, PUNE 1506750
CNC Milling machine
1 No INTERFACE, PUNE 737500
SHAPER MACHINE
School of Mechanical Engineering Department of Manufacturing Engineering
MACHINE SHOP
MAJOR FACILITIES AVAILABLE
SLOTTING MACHINE
School of Mechanical Engineering Department of Manufacturing Engineering
MACHINE SHOP
List of Publications - AY 2012-2020 YEAR: 2012
Kuppan, P., Narayanan, S., & Rajadurai, A. (2012). Experimental investigations into electrical
discharge deep hole drilling of Inconel 718 using copper-tungsten electrode. International
Journal of Mechatronics and Manufacturing Systems, 5(5-6), 399-418.
Baskar, A., & Xavior, M. A. (2012). A new Heuristic algorithm using Pascal’s triangle to determine
more than one sequence having optimal/near optimal make span in flow shop scheduling
problems. International Journal of Computer Application, 39(5), 9-15.
Xavior, A. M., & Anouncia, M. S. (2012). Case-based reasoning (CBR) model for hard machining
process. The International Journal of Advanced Manufacturing Technology, 1-7.
Baskar, A., & Anthony Xavior, M. (2012). Effects of dummy machines on make span in a few
classical heuristics using Taillard bench mark problems. International Journal of Materials and
Product Technology, 45(1-4), 145-162.
Vinayagamoorthy, R., & Xavior, M. A. (2012). Surface integrity of Ti-6Al-4V precision machining
using coated carbide tools under dry cutting condition. In Emerging Trends in Science,
Engineering and Technology (pp. 317-324). Springer, India.
Pugazhenthi, R., & Xavior, M. A. (2012). A Heuristic toward Minimizing Waiting Time of Critical
Jobs in a Flow Shop. In Emerging Trends in Science, Engineering and Technology (pp. 343-350).
Springer, India.
YEAR: 2013
Murickan, R. T., Jakkamputi, L. P., & Kuppan, P. (2013). Experimental investigation of dry
electrical discharge machining on SS 316L. Int. J. Latest Trends in Eng. and Tech, 2(3).
Syed, K. H., & Kuppan, P. (2013). Studies on recast-layer in EDM using aluminium powder mixed
distilled water dielectric fluid. International Journal of Engineering and Technology, 5, 1775-
1780.
Rajyalakshmi G, PVRamaiah, Document Optimization of process parameters of wire electrical
discharge machining on Inconel825 using grey relational analysis coupled with principle
component analysis", ISSN:09734562, International Journal of Applied Engineering Research,
2013, Paper No: , Vol: 8, Issue No:11, Pg No:1293-1313
Rajyalakshi G, PVRamaiah, Multiple process parameter optimization of wire electrical discharge
machining on Inconel 825 using Taguchi grey relational analysis", ISSN:02683768, International
Journal of Advanced Manufacturing Technology, 2013, Paper No: 1249, Vol: 69, Issue No:5, Pg
No:1249-1262, DOI No:10.1007/s00170-013-5081
Vinayagamoorthy, R., & Xavior, M. A. (2013). Evaluation of Surface Roughness and Cutting Forces
During Precision Turning. In Advanced Materials Research (Vol. 622, pp. 390-393). Trans Tech
Publications.
Baskar, A., & Anthony, X. M. (2013). Optimization of total material processing time in a
manufacturing flow shop environment. In Advanced Materials Research (Vol. 622, pp. 136-141).
Trans Tech Publications.
Baskar, A., & Xavior, A. M. (2013). Solving Permutation Flow Shop Scheduling Problems with Job
Idle Time in between Two Machines. In Key Engineering Materials (Vol. 531, pp. 699-702). Trans
Tech Publications.
George, T. T., Venugopal, J., Xavior, M. A., & Vinayagamoorthy, R. (2013). Investigation on
Precision Turning of Titanium Alloys. In Advanced Materials Research (Vol. 622, pp. 399-403).
Trans Tech Publications.
Umasankar, V., Karthikeyan, S., & Xavior, M. A. (2013). Enhancing The Interphase Strength Of
Aluminium Composite By Autocatalytic Process. International Journal of ChemTech
Research, 5(5), 2165-2172.
YEAR: 2014
Pandivelan, C., and A. K. Jeevanantham. "Formability Evaluation of AA 6061 Alloy Sheets on
Single Point Incremental Forming using CNC Vertical Milling Machine." 2028-2508(2014)
Venkatesan, K., Ramanujam, R., & Kuppan, P. (2014). Analysis of cutting forces and temperature
in laser assisted machining of Inconel 718 using Taguchi method. Procedia Engineering, 97,
1637-1646.
Venkatesan, K., Ramanujam, R., & Kuppan, P. (2014). Laser assisted machining of difficult to cut
materials: research opportunities and future directions-a comprehensive review. Procedia
Engineering, 97, 1626-1636.
Kannan, M. V., Kuppan, P., Kumar, A. S., Kumar, K. R., & Jegaraj, J. J. R. (2014). Effect of laser scan
speed on surface temperature, cutting forces and tool wear during laser assisted machining of
alumina. Procedia Engineering, 97, 1647-1656.
Kanish, T. C., Kuppan, P., Narayanan, S., & Ashok, S. D. (2014). A Fuzzy Logic based Model to
predict the improvement in surface roughness in Magnetic Field Assisted Abrasive
Finishing. Procedia Engineering, 97, 1948-1956.
Joshi, A., Kansara, N., Das, S., Kuppan, P., & Venkatesan, K. (2014). A study of temperature
distribution for laser assisted machining of Ti-6Al-4V alloy. Procedia Engineering, 97, 1466-
1473.
Xavierarockiaraj, S., & Kuppan, P. (2014). Investigation of cutting forces, surface roughness and
tool wear during laser assisted machining of SKD11Tool steel. Procedia Engineering, 97, 1657-
1666.
Kanish, T. C., Kuppan, P., & Narayanan, S. (2014). Investigation of Surface Texture Generated by
Magnetic Field Assisted Abrasive Finishing. Int J ChemTech Res, 6(3), 1725-1728.
James, S. J., Venkatesan, K., Kuppan, P., & Ramanujam, R. (2014). Comparative study of
composites reinforced with SiC and TiB2. Procedia Engineering, 97, 1012-1017.
Kumar, H. P., & Xavior, M. A. (2014). Graphene reinforced metal matrix composite (GRMMC): a
review. Procedia Engineering, 97, 1033-1040.
Umasankar, V., Xavior, M. A., & Karthikeyan, S. (2014). Experimental evaluation of the influence
of processing parameters on the mechanical properties of SiC particle reinforced AA6061
aluminium alloy matrix composite by powder processing. Journal of Alloys and Compounds, 582,
380-386.
Ashwath, P., & Xavior, M. A. (2014). The effect of ball milling & reinforcement percentage on
sintered samples of aluminium alloy metal matrix composites. Procedia Engineering, 97, 1027-
1032.
Ramkumar, K. D., Patel, S. D., Praveen, S. S., Choudhury, D. J., Prabaharan, P., Arivazhagan, N., &
Xavior, M. A. (2014). Influence of filler metals and welding techniques on the structure–property
relationships of Inconel 718 and AISI 316L dissimilar weldments. Materials & Design (1980-
2015), 62, 175-188.
Vinayagamoorthy, R., & Xavior, M. A. (2014). Parametric optimization on multi-objective
precision turning using grey relational analysis. Procedia Engineering, 97, 299-307.
Abhik, R., Umasankar, V., & Xavior, M. A. (2014). Evaluation of properties for Al-SiC reinforced
metal matrix composite for brake pads. Procedia Engineering, 97, 941-950.
Umasankar, V., Karthikeyan, S., & Xavior, M. A. (2014). The influence of electroless nickel coated
SiC on the interface strength and microhardness of aluminium composites. Journal Material
Environment Science, 5(1), 153-8.
Venkatesan, S., & Xavior, M. A. (2014). A Study On Aluminum Matrix And Various Reinforcements
Of Composites Processed By Stir Casting Method. International Journal of Scientific Research and
Engineering Studies (IJSRES) Volume, 1.
Srivani, A., & Xavior, M. A. (2014). Investigation of surface texture using image processing
techniques. Procedia Engineering, 97, 1943-1947.
Pugazhenthi, R., & Xavior, M. A. (2014). A characteristic study of exponential distribution
technique in a flowshop using taillard benchmark problems. Pak Acad Sci, 51, 187-192.
Xavior, M. A., & Vinayagamoorthy, R. (2014). Fuzzy Inference System for Prediction During
Precision Turning Of Ti-6al-4v. Procedia Engineering, 97, 308-319.
Umasankar, V., & Xavior, M. A. (2014). Fracture toughness evaluation technique for metal matrix
composites using ball indentation method. International Journal of Computer Aided Engineering
and Technology, 7(1), 132-141.
Lakshmanan, S., & Xavior, M. A. (2014). Performance of Coated and Uncoated Inserts during
Intermittent Cut Milling of AISI 1030 Steel. Procedia Engineering, 97, 372-380.
Pugazhenthi, R., & Xavior, M. A. (2014). A Survey on Occurrence of Critical Machines in a
Manufacturing Environment. Procedia Engineering, 97, 105-114.
Pugazhenthi, R., & Xavior, M. A. (2014). Computation of Makespan Using Genetic Algorithm in a
Flowshop. American-Eurasian Journal of Scientific Research, 9(4), 105-113.
Baskar, A., & Xavior, M. A. (2014). Optimization of Makespan in Job and Machine Priority
Environment. Procedia Engineering, 97, 22-28.
YEAR: 2015
Baskar, A., & Xavior, M. A. (2015). Analysis of job insertion technique for different initial
sequences in permutation flow shop scheduling problems. International Journal of Enterprise
Network Management, 6(3), 153-174.
Mahajan, G., Karve, N., Patil, U., Kuppan, P., & Venkatesan, K. (2015). Analysis of Microstructure,
Hardness and Wear of Al-SiC-TiB 2 Hybrid Metal Matrix Composite. Indian journal of science and
technology, 8(S2), 101-105.
Kuppan, P., Narayanan, S., Rajadurai, A., & Adithan, M. (2015). Effect of EDM parameters on hole
quality characteristics in deep hole drilling of Inconel 718 superalloy. International Journal of
Manufacturing Research, 10(1), 45-63.
Saha, M., Tambe, P., Pal, S., Kubade, P., Manivasagam, G., Anthony Xavior, M., & Umashankar, V.
(2015). Effect of non-ionic surfactant assisted modification of hexagonal boron nitride
nanoplatelets on the mechanical and thermal properties of epoxy nanocomposites. Composite
Interfaces, 22(7), 611-627
Karthikeyan, S., Xavior, M. A., Jeeva, P. A., & Raja, K. (2015). A green approach on the corrosion
studiesof Al-SiCcomposites in Sea water. International Journal of ChemTech Research, 8(3),
1109-1113.
Pugazhenthi, R., & Xavior, M. A. (2015). A heuristic to minimise the idle time of the rental/critical
machine in a flowshop. International Journal of Services and Operations Management, 22(4),
395-412.
Karthik C, Rajyalakshmi G, Duraisamy R, Document Optimization of WEDM process for
machining aluminium metal matrix composites", ISSN:09734562, International Journal of
Applied Engineering Research, 2015, Paper No: , Vol: 10, Issue No:55, Pg No:3757-3762,
Rajyalakshmi G, PVRamaiah, Application of Taguchi Fuzzy-Grey Relational Analysis for Process
Parameters Optimization of WEDM on Inconel-825", ISSN:09746846, Indian Journal of Science
and Technology, 2015, Paper No: , Vol: 8, Issue No:35, Pg No:-, DOI
No:0.17485/ijst/2015/v8i35/50946
YEAR: 2016 Oyyaravelu, R., Kuppan, P., & Arivazhagan, N. (2016). Metallurgical and mechanical properties of
laser welded high strength low alloy steel. Journal of advanced research, 7(3), 463-472.
Venkatesan, K., Ramanujam, R., & Kuppan, P. (2016). Parametric modeling and optimization of
laser scanning parameters during laser assisted machining of Inconel 718. Optics & Laser
Technology, 78, 10-18.
Pugazhenthi, R., Xavior, M. A., & Saravanan, R. (2016). A case study on effect of grouping
technique in a multi-stage hybrid flow shop. International Journal of Computing Science and
Mathematics, 7(1), 42-53.
Kumar, H. P., & Xavior, M. A. (2016). Fatigue and wear behavior of Al6061–graphene composites
synthesized by powder metallurgy. Transactions of the Indian Institute of Metals, 69(2), 415-
419.
Ashwath, P., & Xavior, M. A. (2016). Effect of ceramic reinforcements on microwave sintered
metal matrix composites. Materials and Manufacturing Processes, 1-6.
Ashwath, P., & Xavior, M. A. (2016). Processing methods and property evaluation of Al2O3 and
SiC reinforced metal matrix composites based on aluminium 2xxx alloys. Journal of Materials
Research, 31(9), 1201-1219.
Bhargav Bal Reddy, Vishnu Vardhan Reddy, Sajja Varun, Rajyalakshmi G, Modelling and multi
objective optimization of WEDM of commercially Monel super alloy using evolutionary
algorithms", ISSN:17578981, IOP ConfSeries Materials Science and Engineering, 2016, Paper No:
, Vol: 149, Issue No:, Pg No:-, DOI No:doi:10.1088/1757-899X/149/1/012134
Sai Nishanth Reddy A, Srinath Rao P, Rajyalakshmi G, Document Productivity improvement using
time study analysis in a small scale solar appliances industry- A case study", ISSN:18196608,
Source of the Document ARPN Journal of Engineering and Applied Sciences, 2016, Paper No: ,
Vol: 11, Issue No:1, Pg No:666-674
Rajyalakshmi G, Rajyalakshmi G, Modeling and multi-objective optimization of WEDM of
commercially monel super alloy considering multiple users preferences", ISSN:09751459, Source
of the Document Journal of Pharmaceutical Sciences and Research, 2016, Paper No: , Vol: 8, Issue
No:8, Pg No:902-908
YEAR: 2017 Baruah, A., Pandivelan, C., Jeevanantham, A. K., & Das, S. (2017). Optimisation and formability
study of AA5052 through incremental sheet forming. International Journal of Computer Aided
Engineering and Technology, 9(2), 124-144.
Baruah, A., Pandivelan, C., & Jeevanantham, A. K. (2017). Optimization of AA5052 in incremental
sheet forming using grey relational analysis. Measurement, 106, 95-100.
Sreekar Reddy, Rajyalakshmi G, VK MANUPATI, Document An effective hybrid multi objective
evolutionary algorithm for solving real time event in flexible job shop scheduling problem",
ISSN:02632241, Measurement Journal of the International Measurement Confederation, 2018,
Paper No: , Vol: 114, Issue No:, Pg No:78-90, DOI No:10.1016/j.measurement.2017.09.022
Tejas Ajay, Rajyalakshmi G, Mayur Patil, WEDM machining on Aerospace Materials for improving
Material Properties", ISSN:22147853, Materials Today Proceedings, 2017, Paper No: , Vol: 4,
Issue No:8, Pg No:9107-9116, DOI No:10.1016/j.matpr.2017.07.266
Ranjith Kumar g, Rajyalakshmi G, V KManupati, Document Surface micro patterning of
aluminium reinforced composite through laser peening", ISSN:21561680, Source of the
Document International Journal of Manufacturing Materials and Mechanical Engineering, 2017,
Paper No: , Vol: 7, Issue No:4, Pg No:15-27, DOI No:10.4018/IJMMME.2017100102
Manupati V K, Manupati V K, Rajyalakshmi G, A hybrid multi-objective evolutionary algorithm
approach for handling sequence- and machine dependent set up times in unrelated parallel
machine scheduling problem", ISSN:02562499, Source of the Document Sadhana Academy
Proceedings in Engineering Sciences, 2017, Paper No: , Vol: 42, Issue No:3, Pg No:391-403, DOI
No:10.1007/s12046-017-0611-2
Rajyalakshmi G, Lalith Chaithanya, Mahesh Senapathi, Sasikanth T, Analysis of mechanical
properties of AMMC during WEDM process", ISSN:1849544, Journal Applied sciences and
Research, 2015, Paper No: , Vol: 11, Issue No:14, Pg No:121-126
Hari Prasad N, Rajyalakshmi G, Srinivasula reddy A, Document A typical manufacturing plant
layout design using CRAFT algorithm", ISSN:18777058, Procedia Engineering, 2014, Paper No: ,
Vol: 97, Issue No:, Pg No:1808-1814, DOI No:10.1016/j.proeng.2014.12.334
Rajyalakshmi G, Yeswanth kumar A, Adithya Kumar, Optimization of friction stir welding
process", ISSN:22774106, International journal of current engineering technology, 2014, Paper
No: , Vol: 4, Issue No:, Pg No:4144-4152
YEAR: 2018 Pandivelan, C., Jeevanantham, A. K., & Sathiyanarayanan, C. (2018). Optimization study on
incremental forming of sheet metal AA5052 for variable wall angle using CNC milling
machine. Materials Today: Proceedings, 5(5), 12832-12836.
Sivakiran, G., Gangwal, Y., Venkatachalam, G., Pandivelan, C., & Ayyappan, S. (2018).
Investigations on machining of banana fibre reinforced hybrid polymer matrix composite
materials. Materials Today: Proceedings, 5(2), 7908-7914.
Subramani, K., Alagarsamy, S. K., Chinnaiyan, P., & Chinnaiyan, S. N. (2018). Studies on testing
and modelling of formability in aluminium alloy sheet forming. Transactions of FAMENA, 42(2),
67-82.
Bolleddu, V., Racherla, V., & Bandyopadhyay, P. P. (2018). Microstructural and Tribological
Characteristics of Air Plasma Sprayed Alumina-Titania Coatings. In Production, Properties, and
Applications of High Temperature Coatings (pp. 268-298). IGI Global.
Mehta, A., Hemakumar, S., Patil, A., Khandke, S. P., Kuppan, P., Oyyaravelu, R., & Balan, A. S. S.
(2018). Influence of sustainable cutting environments on cutting forces, surface roughness and
tool wear in turning of Inconel 718. Mater Today Proc, 5(2), 6746-6754.
Jose, B., Nikita, K., Patil, T., Hemakumar, S., & Kuppan, P. (2018). Online monitoring of tool wear
and surface roughness by using acoustic and force sensors. Materials Today: Proceedings, 5(2),
8299-8306.
Rohit, J. N., Kumar, K. S., Reddy, N. S., Kuppan, P., & Balan, A. S. S. (2018). Computational fluid
dynamics analysis of MQL spray parameters and its influence on MQL milling of SS304.
In Simulations for Design and Manufacturing (pp. 45-78). Springer, Singapore.
Mageshkumar, K., Kuppan, P., & Arivazhagan, N. (2018). Characterization of microstructure and
mechanical properties of nickel based superalloy 617 by pulsed current gas tungsten arc welding
technique. Materials Research Express, 5(6), 066541.
Aranke, O., Gandhi, C., Dixit, N., & Kuppan, P. (2018). Influence of Multiwall Carbon Nanotubes
(MWCNT) on Wear and Coefficient of Friction of Aluminium (Al 7075) Metal Matrix
Composite. Materials Today: Proceedings, 5(2), 7748-7757.
Babu, P. A., Saraf, M. R., Vora, K. C., & Kuppan, P. (2018). Forgeability Study of Al 6061 Alloy
During Warm Forging of Cylindrical Billets. Materials Today: Proceedings, 5(5), 11950-11961.
Oyyaravelu, R., Kuppan, P., & Arivazhagan, N. (2018). Comparative study on metallurgical and
mechanical properties of laser and laser-arc-hybrid welding of HSLA steel. Materials Today:
Proceedings, 5(5), 12693-12705.
Indumathi, S., Rajyalakshmi, G., & Rajasekhar, K. (2018). Experimental Investigations On Friction
Stir Spot Welding Process Of Dissimilar Metals. Materials Today: Proceedings, 5(5), 12056-
12061.
Singla, A. M., Sharma, S., Kaul, A., & Rajyalakshmi, G. (2018). Optimization of WEDM process
during machining of Al-Al2O3 composite using Taguchi based Grey Relational Analysis.
In MATEC Web of Conferences (Vol. 172, p. 04008). EDP Sciences.
YEAR 2019
Vignesh, G., Pandivelan, C., & Narayanan, C. S. (2019). Study on formability and dislocation
density in forming of hemispherical cup. Materials Today: Proceedings.
Muralidharan, B., Chelladurai, H., & Kanmani Subbu, S. (2019). Investigation of magnetic field and
shielding gas in electro-discharge deposition process. Proceedings of the Institution of
Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(11), 3701-3716.
Kanish, T. C., Narayanan, S., & Kuppan, P. (2019). Experimental Investigations on Magnetic Field
Assisted Abrasive Finishing of SS 316L. Procedia Manufacturing, 30, 276-283.
Panchagnula, K. K., & Kuppan, P. (2019). Improvement in the mechanical properties of neat
GFRPs with multi-walled CNTs. Journal of Materials Research and Technology, 8(1), 366-376.
Yelamasetti, B., & Rajyalakshmi, G. (2019). Effect of TIG, pulsed TIG and Interpulse TIG welding
techniques on weld strength of dissimilar joints between Monel 400 and AISI 316. Materials
Today: Proceedings.
Kumar, G. R., & Rajyalakshmi, G. (2019). Role of nano second laser wavelength embedded recast
layer and residual stress on electrochemical corrosion of titanium alloy. Materials Research
Express, 6(8), 086583.
YEAR 2020 Yelamasetti, B., Rajyalakshmi, G., & Vemanaboina, H. (2020). Comparison of metallurgical and
mechanical properties of dissimilar joint of AISI 316 and Monel 400 developed by pulsed and
constant current gas tungsten arc welding processes. The International Journal of Advanced
Manufacturing Technology, 1-12.
Kiran B., Rajyalakshmi G. (2020). Experimental study on structural parameters of wire arc
additive manufacturing on nickel based alloy using argon arc welding, UPB Scientific Bulletin,
Series D: Mechanical Engineering, 82(3):1454-2358.
Rajamurugan, G., Sanjay, A. P., Krishnasamy, P., Muralidharan, B., & Jain, S. (2020). Drilling and
mechanical performance analysis on flax-sisal hybrid composite embedded with perforated
aluminum foil. Journal of Reinforced Plastics and Composites, 39(23-24), 902-917.
Periane, S., Duchosal, A., Vaudreuil, S., Chibane, H., Morandeau, A., Xavior, M. A., & Leroy, R.
(2020). Selection of machining condition on surface integrity of additive and conventional
Inconel 718. Procedia CIRP, 87, 333-338.
Kannan, C., Ramanujam, R., & Balan, A. S. S. (2020). Mathematical modeling and optimization of
tribological behaviour of Al 7075 based hybrid nanocomposites. Proceedings of the Institution of
Mechanical Engineers, Part J: Journal of Engineering Tribology, 1350650120965781.
School of Mechanical Engineering Department of Manufacturing Engineering
CENTRAL WORKSHOP- MACHINE SHOP
GENERAL INSTRUCTIONS TO THE STUDENTS
Uniform and Shoes are compulsory during the lab sessions
Use of Mobile phone inside the lab is strictly prohibited, Defaulters will be viewed seriously.
Do not run in the Machine shop
Do not throw things
Report any accident, however small, immediately
Ensure hammer heads are not loose
Wear uniform and shoes in the laboratory
Do’s
Ensure you know how to start and stop your machine
Ensure that all guards are in position before starting the machine
Ensure the feed mechanism is in neutral position
Check the direction of chuck rotation before starting the operation
Don’ts
Do not wear rings, watches, ties etc.
Do not interface with electrical equipment.
Do not touch evolving chuck or work piece.
Ensure all guards are in position before starting the machine.
Remove the chuck key immediately after use.
Check direction of check rotation before starting the operation.
Wear safety goggles and shoes.
Keep hair short or wear a lap
School of Mechanical Engineering
Department of Manufacturing Engineering
MACHINE SHOP
CHALLENGING EXPERIMENTS
Study the influence of machining (turning/milling/grinding) parameters on surface finish
Tool life study for a given process (turning/milling/drilling) for a given combination of process
parameters.
Lathe operations (Turning, grooving, chamfer, taper cutting and knurling)
Making of suitable thread for a mat part (bolt or nut)
Key way slot cutting using shaper or slotting or milling
Drilling, Reaming and tapping
Making a mating pinion or gear for the selected gear ratio.
Gear Hobbing
Grinding of single point cutting tool
Machining of profiles using special purpose machine tools
Measurement through Tool makers microscope
Measurement of geometrical surfaces through CMM