sargas line direct fired heaters - fse energy direct-fired heater line the following products are...
TRANSCRIPT
Air-Gas Heater
Turn-key Delivery
Phone: +1.985.867.9150Fax: +1.985.867.9155www.fseenergy.com
Corporate Headquarters: 74378 Highway 25 Covington, LA 70435
Process Heater Division: 407 East Maple St., Ste. 306 Cumming, GA 30040
Fabrication Division: 2990 Highway 20 Vacherie, LA 70090
SARGAS LINE DIRECT FIRED HEATERS
01 PROVEN SUCCESS
FSE Energy offers the Sargas Line of turnkey direct-fired heaters with accompanying auxiliary equipment, which are all highly customizable depending on the site-specific customer requirements. These can be used in a variety of industrial applications within the heat output range of 0.5-100 MMbtu/hr, depending on site-specific requirements.
The FSE Energy product line incorporates a unique secondary combustion chamber section to control the uneven temperature distribution as it pertains to heating coil surface areas. This avoids high temperature swings linked to radiant heat transfers, as is important on temperature sensitive processes.
The additional FGR allows for uniform distribution of heat energy to the process wile maintaining appropriate heat flux densities, film temperatures, and precise control throughout the chamber safely via forced convection.
02 SYSTEM FEATURES
PROCESS COIL - Design is based on viscosity and flow arrangements of fluid or gas. FSE capabilities include managing process streams that have particulate matter or suspended solids.
CONFIGURATION - Bare and finned-tube coil configurations are designed in-house, row-by-row, to predictable film temperatures on each individual tube row with floating baffle plates for thermal expansion.
CONTROL SYSTEMS - Turnkey control systems are engineered to enhance heating performance and safety. PLC based or relay logic devices located in an approved rated enclosure ensure combustion control over system.
FUEL SOURCE - From low BTU land-fill gas to waste oil, FSE can engineer and design the combustion burner system to accommodate even the most unusual fuel sources.
EFFICIENCY - up to 90+%(LHV Basis) depending on process inlet temperature
EMISSIONS - Utilizing latest combustion BACT technology, The Sargas heaters are designed to meet the most stringent NOx, SOx, and CO requirements.
Within the FSE Energy
Sargas direct-fired heater
line the following products
are offered.
• Convection Heaters
• Radiant Heaters
• Propane Vaporizers
• Mol Sieve
Regenerators
• Air / Gas Heaters
• Crude Oil Heaters
FSE Energy has over
60 years of combined
engineering experience
to meet our customers
process requirements.
PRODUCTS
Phone: +1.985.867.9150Fax: +1.985.867.9155www.fseenergy.com
Corporate Headquarters: 74378 Highway 25 Covington, LA 70435
Process Heater Division: 407 East Maple St., Ste. 306 Cumming, GA 30040
Fabrication Division: 2990 Highway 20 Vacherie, LA 70090
Ferae cus res sandus ipsuntias id quunt doluptat. Ditati idis magnam repudigentus poribus veliqui dit aciendi debis et, sae aonsect emporem oluptae comnimp erovit alisci arumquunt ad et haribus inimus et aliqui.
ABOUT FSE ENERGY
ABOUT FSE ENERGY
FSE Energy enables our global utility and industrial customers to succeed through the delivery of the highest quality heat and energy equipment, services, and solutions, using advanced, proven and environmentally sound technology. Since 1935, we have built strong relationships by providing unwavering dedication and support to our customers around the world.
APPLICATIONS
The FSE Energy customiz-
able line of Sargas direct-
fired heaters have a rante
up to 100 MM/Btu of heat
and are available for a vari-
ety of options including:
• Steam Superheater
• Reactions Heaters
• Cryogenic: LNG, NH3,
LPG
• Asphalt
• Fuel Oil
• Emulsions
• Edible Oils
• Water
• Glycol / Water
FSE Energy equipment has
the quality & durability that
is required in the rigorous
and utility marketplaces.
Turnkey solutions or an
equipment only package
is available upon customer
request.
04 THE FSE ENERGY RETURN ON INVESTMENT
At FSE Energy our mission is to make our customers more successful. We accomplish this through generating a better return on investment on equipment purchased from us than that of our competition. Benefits include the following:
• Most precise control of heating distribution process available in the industry• Increased ROI through greater system efficiency• Entire project lifecycle managed by FSE Energy employees• Long product life (Average 20+ years)• Significantly reduced maintenance & downtime costsv
05 THE FSE ADVANTAGE
Within the entire FSE Energy product line, we offer a completely customized product delivered turnkey from project inception to start-up and aftermarket services, including a full range of services to guarantee the seamless integration of our turnkey equipment into your specific process or need.
• Engineering & Design• Complete piping designs, foundations and electrical upon request• Stress Analysis• Fabrication• Construction beyond the integration points• Aftermarket Services• Safety Audits• Maintenance & Service Plans