sanitary ware specification sheet photo/files/roughin_dl...mr. eric wong/ mr. wilson hung model no.:...
TRANSCRIPT
PROJECT REF REV ITEMCODE
LOCATION DATE PAGE
Mr. Eric Wong/ Mr. Wilson Hung
Model No.: 38771000
for dual flush or start & stop actuationØ 48 mmin combination with bath furniturefor material thickness from 18 -24 mmwith 600 mm air hoseGROHE StarLight chrome finish
Model No.: 38422000
Flushing cistern for WC 3/6 or 6/9 l Adjustableconcealed installation, 0.82 m installation height, dual flush discharge valve, pneumatic, front or topactuation, water supply from left/right or topinsulated against condensation, 415 x 410 x 360 mm, ½" water supply connectionfixing brackets, flush pipe, shortable inspection shaft incl. protectionduring construction phase, without wall plate/actuation
Note:
Website www.acmesanitary.com.hk
Contact Tel/Fax (852) 2388-7171 / (852) [email protected]
SANITARY WARE SPECIFICATION SHEET
Illustration/ DrawingItem Descriptions GROHE (Germany) WC concealed flushingcistern 0.82 m installation height, 3/6 Lpneumatic dual push button actuation Ø48mm
38422000 (Cistern)37102SH0 (Inset set)
Model
Dimensions
38771000 (Air button)
L415 x W140 x H455 mm
Chome Plated
Supplier
Finish
Acme Sanitary Ware Co. Ltd
Manufacturer GROHE Limited
PROJECT REF REV ITEMCODE
LOCATION DATE PAGE
* All information of the above is for the reference only. No prior notice is made if any changes.
SANITARY WARE SPECIFICATION SHEET
PROJECT REF REV ITEMCODE
LOCATION DATE PAGE
* All information of the above is for the reference only. No prior notice is made if any changes.
Item Descriptions GROHE (Germany) plastic inlet valve Illustration/ Drawing
Model 37095000
Material Plastic
Manufacturer GROHE (Germany)
Source Acme Sanitary Ware Co. LtdMr. Eric Wong/ Mr. Wilson Hung
Contact Tel/Fax (852) 2388-7171 / (852) 2710-8012E-mail [email protected] www.acmesanitary.com.hk
Note:
SANITARY WARE SPECIFICATION SHEET
PROJECT REF REV ITEMCODE
LOCATION DATE PAGE
* All information of the above is for the reference only. No prior notice is made if any changes.
SANITARY WARE SPECIFICATION SHEET
Item Descriptions GROHE (Germany) plastic flush device Illustration/ Drawing
Model 42314000
Material Plastic
Manufacturer GROHE (Germany)
Source Acme Sanitary Ware Co. LtdMr. Eric Wong/ Mr. Wilson Hung
Contact Tel/Fax (852) 2388-7171 / (852) 2710-8012E-mail [email protected] www.acmesanitary.com.hk
Note: