samsung np-nc10-ka02us fan replacement · samsung np-nc10-ka02us fan replacement replacing the fan...

7
Samsung NP-NC10-KA02US Fan Replacement Replacing the fan of Samsung NP-NC10-KA02US for improvement on overheating malfunction Written By: JHOAN USECHE Samsung NP-NC10-KA02US Fan Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 7

Upload: lamtu

Post on 17-Apr-2018

216 views

Category:

Documents


1 download

TRANSCRIPT

Samsung NP-NC10-KA02US Fan ReplacementReplacing the fan of Samsung NP-NC10-KA02US for improvement on overheating malfunction

Written By: JHOAN USECHE

Samsung NP-NC10-KA02US Fan Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 7

INTRODUCTION

Fan will be replaced in order to improve and control overheating that could create malfunctions on thecomputer system.

TOOLS:iFixit Opening Tools (1)

Phillips #1 Screwdriver (1)

Samsung NP-NC10-KA02US Fan Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 7

Step 1 — Battery

Locate the external battery on the bottom side of the device.

Locate the tab on the right side of the battery.

Shift the tab to the left.

Step 2

Locate the tab on the left side of thedevice's battery.

Push the left tab to the right.

Samsung NP-NC10-KA02US Fan Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 7

Step 3

Pull the battery up from the device.

Step 4 — Back Plate

Locate the 14, 3.93 mm, screws thatneed to be removed on the base ofthe computer.

Samsung NP-NC10-KA02US Fan Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 7

Step 5

Remove all 14 of the 3.93 mmscrews using a PH1 screw bit.

Step 6

Using two plastic opening tools remove the back plate.

These plastic opening tools have a flat-head that extends as a wedge which are utilized to separatepressure fit plastic components without causing any damage to them.

The back plate is now removed exposing all of the hardware components.

Samsung NP-NC10-KA02US Fan Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 7

Step 7 — Fan

Remove the three screws holding the fan using a 3.9mm screwdriver.

All three screws need to be removed in order to continue on to next step.

Step 8

Unplug the wires connected to thefan using a plastic opening tool.

Samsung NP-NC10-KA02US Fan Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 7

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-06-23 09:59:33 AM.

Step 9

You are now able to carefully detachthe fan from the base.

Samsung NP-NC10-KA02US Fan Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 7