salice catalogo generale web - uk
TRANSCRIPT
12
Application with full overlay door
Application with half overlay door
Application with inset door
S = Thickness of the cabinet sideD = Required door overlayT = Door thicknessK = Drilling distanceA = RevealL = Gap between door and carcaseH = Height of the mounting plateG = Hinge constant
Whatever door overlay is required, you can select from ourrange the combination of both the type of hinge arm and thethickness of mounting plate necessary to solve your construc-tion problem and avoid the need to stock too many differentcomponents.
Abbreviations
S = Thickness of the cabinet sideT = Door thicknessK = Drilling distanceA = RevealL = Gap between internal face of door
and internal cabinet elements(e.g. shelves, drawers, etc.)
H = Height of the mounting plateG = Hinge constant
Whatever door overlay is required, you can select from ourrange the combination of both the type of hinge arm and thethickness of mounting plate necessary to solve your construc-tion problem and avoid the need to stock too many differentcomponents.
1-81 inglese 5-09-2006 17:04 Pagina 12
Explanatory notes
13
Simulation of the opening movement of a 110° hinge with full overlay door
Simulation of the opening movement of a 110° hinge with half overlay door
1-81 inglese 5-09-2006 17:04 Pagina 13
Sideways adjustment
14
Sideways adjustment of the door with Series 200, 100, Logica, B, 300, F and 400 hinges
Sideways adjustment of the door is made by using the indicated screw. It is possible to recover the gap behind the door (the initial “L” value of 0.7 mm) simply by using the assembly stop located on the underside of the hinge.
Sideways adjustment of the door with Series 800 hinges
Required sideways adjustment of the door is made by slackening the hinge fixing screw. It is possible to recover the gap behind the door (the initial “L” value 0.7 mm) simply byusing the assembly stop located on the underside of the hinge. Finally the fixing screw must be retightened.
Sideways adjustment of the door with Series 900 and 600 hinges
A specially developed technical solution allows the sideways adjustment of the door whilemantaining the gap behind the door (“L” value of 0.7 mm). The adjustment screw operates in conjunction with the inner leaf of the hinge arm. The door moves in only one direction -parallel to the carcase and without a gap developing between the door and the carcase. No further adjustments are necessary.
-1.5 + 4.5 mm (Series 200, 100, Logica, B)-0,5 + 5.5 mm (Series F and 400)-1.5 + 3 mm (Series 300)
-1.5 + 4 mm (Series 900)+ 5 mm (Series 600)
1-81 inglese 5-09-2006 17:04 Pagina 14
15
Depth adjustment
The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the doorto be adjusted frontally by + 2,8 mm. Finally the fixing screw must be retightened.
Traditional depth adjustment
The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the doorto be adjusted frontally from -1,5 mm to +3 mm. Finally the fixing screw must be retightened.
Traditional depth adjustment with Series 800 hinges
Depth adjustment is made without loosening any screws. The door can be moved frontally from -0,5 mm to +2,8 mm simply by rotating the cam adjuster in this range of mounting plates.
Depth adjustment with DOMI® snap-on mounting plates - Model BAV
1-81 inglese 5-09-2006 17:04 Pagina 15
Depth adjustment
16
Depth adjustment with Domi® snap-on mounting plates - Models BAPXR and BARXR -
Depth adjustment is made without loosening any screws. The door can be moved frontallyfrom -0,5 mm to +2,8 mm simply by rotating the cam adjuster in this range of mounting plates.
1-81 inglese 5-09-2006 17:04 Pagina 16
17
Height adjustment
Height adjustment is made without loosening any screws. The door can be moved vertically by ±2 mm simply by rotating the cam adjuster in this range of mounting plates.
Height adjustment with Domi® snap-on mounting plates - Models BAPXR and BARXR -
By loosening the two fixing screws it is possible to adjust the door vertically by ±2 mm. Theoval holes allow the mounting plate to slide freely in both directions. Finally, the screws mustbe retightened.
Height adjustment with Series 200 and Domi® snap-on mounting plates - Model BAV
Height adjustment is made without loosening any screws. The door can be moved vertically by ±2 mm simply by rotating the cam adjuster in this range of mounting plates.
Height adjustment with Series 200 hinges - Models B2RXE and B2PXE -
1-81 inglese 5-09-2006 17:04 Pagina 17
18
1-81 inglese 5-09-2006 17:04 Pagina 18
Series 200
27
Ser
ies
20
0 h
inge
s
1-81 inglese 5-09-2006 17:04 Pagina 27
28
The Series 200 make up an integrated system of hinges developed to provide a solution toany situation involving concealed hinges.Bright nickel plated steel cup and arm.Dimensions of the Ø 35 mm cup.
Constant «L» value of 0,7 mm (it does not change during sideadjustment).
Approx. number of hinges required according to the doordimension and weight
Adjustments
Mounting plates
Series 200Technical features
Width of the door Weight of the door (N)
Hei
ght
of t
he d
oor
Compensating side adjustment from -1,5 mm to +4,5 mm
Height adjustment ±2 mm
Depth adjustment with Series 200 mounting plates +2,8 mm
Depth adjustment with DOMI® snap-on mounting platesfrom -0,5 mm to +2,8 mm
Anti-sliding safety stop
Symmetrical and asymmetrical bright nickel plated steel ordie-cast Series 200 mounting plates
Snap-on assembly on DOMI® mounting plates
Positioning with pre-determined stop on traditional Series200 mounting plates
N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws
1-81 inglese 5-09-2006 17:04 Pagina 28
29
Series 200Drillings and fixings
Ser
ies
20
0 h
inge
s
Wood screw
Premounted wood screw
Rapido
Dowel
Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C2...7A99
Fill this position with the chosen letter or number.
1-81 inglese 5-09-2006 17:04 Pagina 29
30
For thick doors up to 32 mm, with special profiles
11 mm deep metal cup
94° opening
Possible drilling distance on the door (K): from 3 to 8 mm
Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates
Technical information
Space needed to open the door
The above values are calculated on the assumption that the doors have square edges.They are reduced if the doors have radiussed edges.
Projection of the door
Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.
With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind theabove L-K-T values.
T= 16 18 20 22 24 26 28 30 32
K=3 A= 0,4 0,8 1,2 1,7 2,4 3,2 4,5 6,3 8,1
K=4 A= 0,4 0,7 1,2 1,7 2,3 3,1 4,2 5,6 7,5
K=5 A= 0,4 0,7 1,1 1,6 2,3 3,0 3,9 5,3 7,0
K=6 A= 0,4 0,7 1,1 1,6 2,2 2,9 3,8 5,0 6,5
K=7 A= 0,4 0,7 1,1 1,6 2,1 2,8 3,7 4,7 6,1
K=8 A= 0,4 0,7 1,1 1,5 2,1 2,8 3,6 4,5 5,8
K= 3 4 5 6 7 8
L= 0,0 0,0 0,0 0,0 0,1 1,1
“C” value
C=22,5 + K + A
Series 200 94°
1-81 inglese 5-09-2006 17:04 Pagina 30
31
Arm 0CA C2…7A99CL C2...5A99
H= 15 + K - (D)
Arm 9CA C2...7G99CL C2...5G99
H= 6 + K - (D)
Use these formulas to determine the type ofhinge arm, the drilling distance “K” and the height of the mounting plate “H” which isnecessary to solve each application problem.
Arm 17CA C2...7P99CL C2...5P99
H= -2 + K + A
Arm 5CA C2...7D99CL C2...5D99
H= 10 + K - (D)
CA sprung hingeCL unsprung hinge
PackingBoxes 300 pcs.Pallets 7200 pcs.
Series 200 94°
Ser
ies
20
0 h
inge
s
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
1-81 inglese 5-09-2006 17:04 Pagina 31
32
When a greater opening angle is required.
11 mm deep metal cup
110° opening
Possible drilling distance on the door (K): from 3 to 6 mm
Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates
Technical information
Space needed to open the door
The above values are calculated on the assumption that the doors have square edges.They are reduced if the doors have radiussed edges.
Projection of the door
Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.
With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind theabove L-K-T values.
T= 16 17 18 19 20 21 22 23 24 25 26
K=3 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,4 3,7 5,1 6,5 7,8
K=4 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,1 2,7 4,1 5,5 6,8
K=5 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,1 2,6 3,1 4,1 5,4
K=6 A= 0,5 0,7 0,9 1,2 1,5 1,8 2,1 2,5 3,0 3,5 4,4
T= 16 17 18 19 20 21 22 23 24 25 26
K=3 L= 0,0 0,0 0,0 0,0 0,2 0,5 0,8 1,1 1,4 1,7 1,9
K=4 L= 0,0 0,0 0,3 0,6 0,9 1,2 1,4 1,7 2,0 2,3 2,6
K=5 L= 1,1 1,3 1,6 1,8 2,1 2,3 2,6 2,9 3,1 3,4 3,6
K=6 L= 2,0 2,3 2,5 2,8 3,1 3,3 3,6 3,8 4,1 4,3 4,6
“C” value
C=20 + K+ A
Series 200 110°
1-81 inglese 5-09-2006 17:04 Pagina 32
33
Arm 0CA C2...6A99CL C2...4A99
H= 15 + K - (D)
Arm 5CA C2...6D99CL C2...4D99
H= 10 + K - (D)
Arm 9CA C2...6G99CL C2...4G99
H= 6 + K - (D)
Use these formulas to determine the type ofhinge arm, the drilling distance “K” and the height of the mounting plate “H” which isnecessary to solve each application problem.
Arm 17CA C2...6P99CL C2...4P99
H= -2 + K + A
CA sprung hingeCL unsprung hinge
PackingBoxes 300 pcs.Pallets 7200 pcs.
Series 200 110°
Ser
ies
20
0 h
inge
s
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
1-81 inglese 5-09-2006 17:04 Pagina 33
36
Hinge with greater opening angle and reduced operating profile
11 mm deep die-cast cup
165° opening
Possible drilling distance on the door (K): from 3 to 8 mm
Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates
Technical information
Space needed to open the door
The above values are calculated on the assumption that the doors have square edges.They are reduced if the doors have radiussed edges.
T= 16 18 20 22 24 26 28
K=3 A= 0,0 0,0 0,0 0,7 2,7 4,6 7,9
K=4 A= 0,0 0,0 0,0 0,1 1,8 3,8 6,9
K=5 A= 0,0 0,0 0,0 0,1 1,2 3,0 5,9
K=6 A= 0,0 0,0 0,0 0,1 0,9 2,5 4,9
K=7 A= 0,0 0,0 0,0 0,1 0,7 2,0 3,9
K=8 A= 0,0 0,0 0,0 0,1 0,6 1,7 3,2
“C” value
For spaces with removable components.Opening with lateral door protrusionequal to 5,5 mm with a hinge with straight arm, H=0 mounting plate andK=3 mm.
Series 200 165°
1-81 inglese 5-09-2006 17:04 Pagina 36
37
Arm 0CA C2...FA99CL C2...EA99
H= 15 + K - (D)
Arm 5CA C2...FD99CL C2...ED99
H= 10 + K - (D)
Arm 9CA C2...FG99CL C2...EG99
H= 6 + K - (D)
Use these formulas to determine the type ofhinge arm, the drilling distance “K” and the height of the mounting plate “H” which isnecessary to solve each application problem.
To limit the opening of the hinge, see page203 chapter “Accessories”.
Arm 17CA C2...FP99CL C2...EP99
H= - 2 + K + A
CA sprung hingeCL unsprung hinge
PackingBoxes 100 pcs.Pallets 2400 pcs.
Series 200 165°
Ser
ies
20
0 h
inge
s
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
1-81 inglese 5-09-2006 17:04 Pagina 37
43
Arm -30°CA C2...7W99
-30°
Arm -45°CA C2...7H99
-45°
The solution of assembly problems wheredoors are mounted at a positive or negativeangle requires the verification of drillingdistances by a practical trial. Please do nothesitate to consult our technical supportdepartment for assistance.
11 mm deep metal cup
120° opening
Possible drilling distance on the door (K): from 3 to 6 mm
Compatible with all traditional Series 200 mounting platesand with all Domi® snap-on mounting plates
Technical information
CA sprung hinge
PackingBoxes 150 pcs.Pallets 3600 pcs.
Series 200 complementary hinges
For wooden doors with negative angled assembly
Ser
ies
20
0 h
inge
s
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
1-81 inglese 5-09-2006 17:04 Pagina 43
44
Arm 15°CA C2...7Z99
15°
Arm 24°CA C2...7U99
24°
Arm 30°CA C2...7E99
30°
The solution of assembly problems wheredoors are mounted at a positive or negativeangle requires the verification of drillingdistances by a practical trial. Please do nothesitate to consult our technical supportdepartment for assistance.
11 mm deep metal cup
94° opening
Possible drilling distance on the door (K): from 3 to 8 mm
Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates
Technical information
CA sprung hinge
PackingBoxes 150 pcs.Pallets 3600 pcs.
Series 200 complementary hinges
For wooden doors with positive angled assembly
1-81 inglese 5-09-2006 17:04 Pagina 44
45
Arm 30° CA C2...7T9930°
Arm 37°CA C2...7K99
37°
Arm 45°CA C2...7M99
45°
Arm 45° CA C2...7V9945°
Arm 45°CA C2...7M99AC
45°
Series 200 complementary hinges
For wooden doors with positive angled assembly
Ser
ies
20
0 h
inge
s
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
1-81 inglese 5-09-2006 17:04 Pagina 45
Ser
ies
20
0 h
inge
s
47
H = 0
Heights of mounting plates for every assembly
H = 9 H = 12
CA C2…7N99Crampon
11 mm deep metal cup
94° opening
Possible drilling distance on the door (K): from 3 to 8 mm
Compatible with all traditional Series 200 mounting plates,28x32 mm drilling.
NOT COMPATIBLE with DOMI® snap-on mounting plates
Technical information
CA sprung hinge
PackingBoxes 150 pcs.Pallets 3600 pcs.
Series 200 complementary hinges
Crampon hinges - For smaller spaces with 15x32 mm drilling
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
1-81 inglese 5-09-2006 17:04 Pagina 47
49
CA C2…7F99
H = 13 + K - (D)
11 mm deep metal cup
94° opening
Possible drilling distance on the door (K): from 3 to 8 mm
Compatible with all traditional Series 200 mounting plates.
NOT COMPATIBLE with DOMI® snap-on mounting plates
Technical information
CA sprung hinge
PackingBoxes 150 pcs.Pallets 3600 pcs.
Series 200 complementary hinges
For fridge doors
Ser
ies
20
0 h
inge
s
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
1-81 inglese 5-09-2006 17:04 Pagina 49
50
11 mm deep die-cast cup
35 mm cup diameter
Opening angle of the first door 70°
Possible drilling distance on the door (K) : from 3 to 6 mm
Maximum thickness of the door with square edges: 23 mm.For thicker doors or doors with mouldings or with largeradiussed edges, please refer to our technical assistance.
Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates
Technical information
CA C2...YA99
CA sprung hinge
PackingBoxes 150 pcs.Pallets 3600 pcs.
Use these formulas to determine the height of mounting plate and drilling distance.
H*= 26 - T - KThe mounting plate heights that arenot standard are obtained with themounting plate of lower height + sideways adjustment.
Drilling distance:cruciform mounting plates = 47 – T
Drilling distance:longitudinal mounting plates = (31 – T) + 32
T
20
16
19
18
K
5
6
3
4
H
26 - 20 - 5 = 1 mm
26 - 16 - 6 = 4 mm
26 - 19 - 3 = 3 mm
26 - 18 - 4 = 5 (H = 4+1 mm adjustment)
Examples with doors with square edges
T= Thickness of the door with square edges
Series 200 complementary hinges
For corner cabinets
Use the tables “Drillings and fixings” atpage 29 to complete the code number ofthe desired hinge.
X
47 - 20 = 27 mm
47 - 16 = 31 mm
47 - 19 = 28 mm
47 - 18 = 29 mm
X
31 - 20 = 11 + 32 mm
31 - 16 = 15 + 32 mm
31 - 19 = 12 + 32 mm
31 - 18 = 13 + 32 mm
Inglese pag 50-51 6-09-2006 10:13 Pagina 1
51
C2AYA99 hinge movement and maximum opening width
Space required to accomodate the hinge
With Series 200 mountingplates
The maximum space required to accommodate the hinge is 52 mm with 16 mm thick doors. With thicker doorsthe amount of space required is reduced.
With DOMI® snap-on mounting plates
The maximum space required to accommodate the hinge with 16 mm thick doors is 64 mm with DOMI® mounting plates and 68 mm with mounting plates with back cam.With thicker doors the amount of space required is reduced.
Series 200 complementary hinges
For corner cabinets
Ser
ies
20
0 h
inge
s
Inglese pag 50-51 6-09-2006 10:13 Pagina 2
C2A7H99B2V3B09/15
C2A7W99B2V3B09/15
C2A7W99B2V3BW9R/15
CFA7A99B2V3BW9/15
C2A7A99B2V3BW9R/15
C2A7A99B2V3BW9R/15
C2A7A99B2V3BW9S/15
C2A7Z99B2V3B09/15
C2A7U99B2V3B09/15
C2A7E99B2V3B09/15
C2A7K99B2V3B09/15
C2A7M99B2V3B09/15
C2A7M99B2V3BW9R/15
C2A7M99B2V3BW9/15
C2A7M99B2V3BW9S/15
52
Series 200 complementary hinges
Special angled assemblies
1-81 inglese 5-09-2006 17:04 Pagina 52
11
22
33
44
11
22
33
44
Traditional assembly with Series 200 mounting plates Assembly with DOMI® snap-on mounting plates
Locate the lugs on the mounting plate into the recesses beneath thearm.
Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.
Tighten the fixing screw.
An «L» value of 0,7 mm between door and cabinet side is achieved on final assembly.
«Key hole» safety feature.
Gently rotate the door in the direction shown.
Then press lightly on the end of the arm to secure the catch.
To remove the hinge from the mounting plate, press gently in the places shown by the arrows.
53
Series 200 Assembly instructions
Ser
ies
20
0 h
inge
s
1-81 inglese 5-09-2006 17:04 Pagina 53
54
1-81 inglese 5-09-2006 17:04 Pagina 54
Series 900
95
Ser
ies
90
0 h
inge
s
82-160 inglese 5-09-2006 18:32 Pagina 95
96
Bright nickel plated steel cup and arm.Dimensions of the Ø 35 mm cup.
Approx. number of hinges required according to the doordimension and weight.
Adjustments
Mounting plates
Series 900Technical features
Width of the door Weight of the door (N)
Hei
ght
of t
he d
oor
Side adjustment from -1,5 mm to +4 mm
Height adjustment ±2 mm
Depth adjustment +2,5 mm
Symmetrical and asymmetrical bright nickel plated steel ordie-cast Series 200 mounting plates
NOT COMPATIBLE with Series 200 mounting plates with negative height
N.B. : Use Pozidrive No. 2 screwdrivers for all screws
82-160 inglese 5-09-2006 18:32 Pagina 96
97
Series 900Drillings and fixings
Wood screw
Premounted euroscrew
Premounted wood screw
Premountedrapid euroscrew
Rapido
Dowel
Ser
ies
90
0 h
inge
s
Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C9...7C99
Fill this position with the chosen letter or number.
82-160 inglese 5-09-2006 18:32 Pagina 97
98
C=22,5 + K+ A
For thick doors (up to 32 mm) with special profiles
11 mm deep metal cup
94° opening
Possible drilling distance on the door (K): from 3 to 8 mm
Compatible with all traditional Series 200 mounting plates
NOT COMPATIBLE with DOMI® snap-on mounting plates
Technical information
Space needed to open the door
The above values are calculated on the assumption that the doors have square edges.They are reduced if the doors have radiussed edges.
Projection of the door
Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.
With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind theabove L-K-T values.
T= 16 18 20 22 24 26 28 30 32
K=3 A= 0,4 0,8 1,2 1,7 2,4 3,2 4,5 6,3 8,1
K=4 A= 0,4 0,7 1,2 1,7 2,3 3,1 4,2 5,6 7,5
K=5 A= 0,4 0,7 1,1 1,6 2,3 3,0 3,9 5,3 7,0
K=6 A= 0,4 0,7 1,1 1,6 2,2 2,9 3,8 5,0 6,5
K=7 A= 0,4 0,7 1,1 1,6 2,1 2,8 3,7 4,7 6,1
K=8 A= 0,4 0,7 1,1 1,5 2,1 2,8 3,6 4,5 5,8
K= 3 4 5 6 7 8
L= 0,0 0,0 0,0 0,0 0,0 0,1
“C” value
Series 900 94°
82-160 inglese 5-09-2006 18:32 Pagina 98
99
Arm 0CA C9...7C99CL C9...5C99
H= 15 + K - (D)
Arm 5CA C9...7J99CL C9...5J99
H= 10 + K - (D)
Arm 9 CA C9...7L99CL C9...5L99
H= 6 + K - (D)
Use these formulas to determine the type ofhinge arm, the drilling distance “K” and the height of the mounting plate “H” which isnecessary to solve each application problem.
Arm 17CA C9...7S99CL C9...5S99
H= -2 + K + A
CA sprung hingeCL unsprung hinge
PackingBoxes 300 pcs.Pallets 7200 pcs.
Series 900 94°
Ser
ies
90
0 h
inge
s
Use the tables “Drillings and fixings” atpage 97 to complete the code number ofthe desired hinge.
82-160 inglese 5-09-2006 18:32 Pagina 99
11
22
33
44
Traditional assembly with Series 200 mounting plates
Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.
Tighten the fixing screw.
An «L» value of 0,7 mm between door and cabinet side is achieved on final assembly.
«Key hole» safety feature.
102
Series 900Assembly instructions
82-160 inglese 5-09-2006 18:32 Pagina 102
For metal profiles
103
For
met
al p
rofil
es
82-160 inglese 5-09-2006 18:32 Pagina 103
104
Arm 0CA C2O6A99
Arm 5CA C2O6D99
Arm 9CA C2O6G99
Arm 17CA C2O6P99
Hinges for the Practical system have been developed for usewith special metal profiles. The particular fixing system doesnot require any profile working. The hinge can be thereforeassembled at any point of the frame.
105° opening
Compatible with all traditional Series 200 mounting platesand with all Domi® snap-on mounting plates
Technical information
H= 15 + 6 - (D)
H= 10 + 6 - (D)
H= 6 + 6 - (D)
H= - 2 + 6 + A
PackingBoxes 150 pcs.Pallets 3600 pcs.
CA sprung hinge
105°
Inglese pag 104-105 6-09-2006 10:59 Pagina 1
106
PackingBoxes 150 pcs.Pallets 3600 pcs.
Arm 30°CA C2O6E99
Arm 45°CA C2O6M99
CA Sprung hinge
30°
45°
Fixing moving component
Glass thickness:4 mm with gasket5 mm without gasket
Cover frame profile
complementary hingesFor positive angled assembly
Inglese pag 106-107 6-09-2006 10:17 Pagina 1
Crampon
Crampon hinges – For cabinet sides with 37x32 mm standard drilling
Hinges for the Practical system have been developed for usewith special metal profiles. The particular fixing system doesnot require any profile working. The hinge can be thereforeassembled at any point of the frame.
105° opening
Compatible with all traditional Series 200 mounting platesand with all Domi® snap-on mounting plates
Technical information
PackingBoxes 150 pcs.Pallets 3600 pcs.
CA Sprung hinge
CA Sprung hinge
Hinges for the Practical system have been developed for usewith special metal profiles. The particular fixing system doesnot require any profile working. The hinge can be thereforeassembled at any point of the frame.
105° opening
Compatible with all traditional Series 200 mounting plates, 28x32 mm drilling
NOT COMPATIBLE with Domi® snap-on mounting plates
Technical information
CA C2O6N99AC
PackingBoxes 150 pcs.Pallets 3600 pcs.
CA C2O6N99
107
E min:61 mm for Series 200 mounting plates70 mm for Domi® snap-on mounting plates74 mm for Domi® snap-on mounting plateswith back cam
Crampon
Crampon hinges – For smaller spaces with 15x32 mm drilling
For
met
al p
rofil
es
complementary hinges
complementary hinges
Inglese pag 106-107 6-09-2006 10:17 Pagina 2
109
Internal cover frame profileof moulded plastic
3 m lengths
D206AA3000
Internal cover frame profile offlat plastic
3 m lengths
D206AP3000
Internal cover frame profile ofmoulded plastic
3 m lengths
D206AR3000
Accessories for the frame assembly
D206BS5Corner connector with 2 fixingscrews for the frame assembly
PackingBoxes 600 pcs.
D206BS5LCorner connector with 4 fixingscrews for the frame assembly
PackingBoxes 600 pcs.
D206HS5Additional corner connectorfor the frame assembly
PackingBoxes 600 pcs.
D206LP3000Frame for doors, glass to be inserted
3 m lengths
PackingBoxes 12 pcs.
D206AG3000Gasket for glass
3 m lengths
PackingBoxes 120 pcs.
D206BL5Adapter for single flap doors,drawer frontals and specialapplications
PackingBoxes 150 pcs.
For
met
al p
rofil
es
PackingBoxes 120 pcs.
PackingBoxes 120 pcs.
PackingBoxes 120 pcs.
Inglese pag 108-109 6-09-2006 10:19 Pagina 2
Assembly instructions
1) The profiles which make up the door arecut to length and the ends mitred at 45°.
2) Insert the corner connector into the profile,recess and fix it by means of its premountedscrew/screws. On large doors it is suggested to use theadditional corner connector (small picture).
3) Repeat the same operation on the otherprofiles which make up the door. The glasswill be applied before fixing the fourth andlast profile.
5) The hinge will be therefore at the exact position of the mounting plate on the cabinet side.
4) Fix the hinges to the mounting plates and then assemble them onto theframe. The operation does not require anywork on the door, as the hinge can be inserted at any point of the profile recess.
6) At this point it is sufficient to fix thehinge onto the profile by simply rotating thecams 90°.
110
82-160 inglese 5-09-2006 18:32 Pagina 110
7) Cut to length and mitre the internal framecover profile also.
8) Complete the preparation of the door byinserting the internal frame cover profilewith a simple pressure.
9) Where the hinges are located, cut theinternal frame cover profile at the position of the same hinges.
11) Internal frame cover profile, flat version.10) Internal frame cover profile, moulded version. 12) Hinges for the Practical system representthe most practical, quickest and elegant solution for all types of furniture.
111
For
met
al p
rofil
es
82-160 inglese 5-09-2006 18:32 Pagina 111
118
11
22
33
44
11
22
33
44
Traditional assembly with Series 200 mounting plates Assembly with DOMI® snap-on mounting plates
Locate the lugs on the mounting plate into the recesses beneath the arm.Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.
Tighten the fixing screw.
An «L» value of 0,7 mm between door and cabinet side is achieved on final assembly.
«Key hole» safety feature.
Gently rotate the door in the direction shown.
Then press lightly on the end of the arm to secure the catch.
To remove the hinge from the mounting plate, press gently in the pla-ces shown by the arrows.
For metal profilesAssembly instructions
82-160 inglese 5-09-2006 18:32 Pagina 118
119
Mini hinge Series
Min
i hi
nges
82-160 inglese 5-09-2006 18:32 Pagina 119
126
Series 600: compact, elegant, very strong mini hinge.Bright nickel plated steel cup and arm.Dimensions of the ø 26 mm cup.
Approx. number of hinges required accordingto the door dimension and weight
Adjustments
Mounting plates
Series 600 Mini hinge
Technical features
Side adjustment +5 mm.It is possible to recover the gap behind the door (the initial“L” value of 0,7 mm) simply by using the assembly stoplocated on the underside of the hinge.
Height adjustment ±2 mm
Depth adjustment with Series 200 mounting plates +2,5 mm
Symmetrical and asymmetrical bright nickel plated steel ordie-cast Series 200 mounting plates
Positioning with pre-determined stop on Series 200 traditio-nal mounting plates
NOT COMPATIBLE with Series 200 mounting plates with negative height
N.B. : Use Pozidrive No. 2 screwdrivers for all screws
Width of the door Weight of the door (N)
Hei
ght
of t
he d
oor
82-160 inglese 5-09-2006 18:33 Pagina 126
127
Series 600 Mini hinge
Drillings and fixings
Wood screw
Premounted wood screw
Premounted euroscrew
Dowel
Min
i hi
nges
Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C6...7C99
Fill this position with the chosen letter or number.
82-160 inglese 5-09-2006 18:33 Pagina 127
128
C=16,5 + K+ A
11,5 mm deep metal cup
26 mm cup diameter
94° opening
Possible drilling distance on the door (K): from 3 to 8 mm
Compatible with all traditional Series 200 mounting plates
NOT COMPATIBLE with DOMI® snap-on mounting plates
Technical information
Space needed to open the door
The above values are calculated on the assumption that the doors have square edges.They are reduced if the doors have radiussed edges.
Projection of the door
Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.
With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind theabove L-K-T values.
T= 16 17 18 19 20 21 22 23
K=3 A= 0,4 0,7 0,9 1,3 2,0 2,9 3,8 4,7
K=4 A= 0,4 0,6 0,9 1,1 1,6 2,4 3,3 4,2
K=5 A= 0,4 0,6 0,8 1,1 1,4 2,0 2,8 3,6
K=6 A= 0,4 0,6 0,8 1,0 1,2 1,8 2,4 3,2
K=7 A= 0,4 0,6 0,8 0,9 1,2 1,5 2,2 2,8
K=8 A= 0,4 0,6 0,8 0,9 1,2 1,5 1,9 2,6
K= 3 4 5 6 7 8
L= 0,0 0,0 0,0 0,7 1,7 2,6
“C” value
Series 600 Mini hinge
82-160 inglese 5-09-2006 18:33 Pagina 128
129
Arm 0CA C6...7C99CL C6...5C99
H= 12,5 + K - (D)
Arm 9CA C6...7L99CL C6...5L99
H= 3,5 + K - (D)
Use these formulas to determine the type ofhinge arm, the drilling distance “K” and the height of the mounting plate “H” which isnecessary to solve each application problem.
Use the tables “Drillings and fixings” at page127 to complete the code number of the desired hinge.
Arm 17CA C6...7S99CL C6...5S99
H= - 4,5 + K + A
CA sprung hingeCL unsprung hinge
PackingBoxes 600 pcs.Pallets 14400 pcs.
Series 600 Mini hinge
Min
i hi
nges
82-160 inglese 5-09-2006 18:33 Pagina 129
132
Hole diameter 26 mm
94° opening
For use with glass from 4 mm to 6 mm thickness
Possible drilling distance on the door (K): from 5,5 to 6,5 mm
Compatible with all traditional Series 200 mounting plates
NOT COMPATIBLE with Domi® snap-on mounting plates
Technical information
PackingBoxes 300 pcs.Pallets 7200 pcs.
Arm 0CA C6C7C39
H= 10 + K - (D)
Arm 9CA C6C7L39
H= 1 + K - (D)
Use these formulas to determine the type ofhinge arm, the drilling distance “K” and the height of the mounting plate “H” which isnecessary to solve each application problem.
CA sprung hinge
Arm 17CA C6C7S39
H= - 7 + K + A
Series 600 Mini hinge
For glass-doors
82-160 inglese 5-09-2006 18:33 Pagina 132
133
Hole diameter 26 mm
94° opening
For use with glass from 4 mm to 6 mm thickness
Possible drilling distance on the door (K):from 5,5 to 6,5 mm
Compatible with all traditional Series200 mounting plates
NOT COMPATIBLE with DOMI® snap-on mounting plates
Technical informationPackingBoxes 300 pcs.Pallets 7200 pcs.
Arm 30°
CA C6C7E39
30°
Arm 45°CA C6C7M39
45°
The solution of assembly problems wheredoors are mounted at a positive or negativeangle requires the verification of drillingdistances by a practical trial. Please do nothesitate to consult our technical supportdepartment for assistance.
CA sprung hinge
CramponCA C6C7N39
Crampon
H = 0
Applications with doors set at any angle between –7,5° to +70° are possible by combining the appropriate hinge andmounting plate.
To be use only with Series 200 mountingplates for traditional assembly and drilling28x32 mm.
H = 9 H = 12
Height of the mounting plates for every assembly
Series 600 Mini hinge
For glass doors with angled assembly
Min
i hi
nges
82-160 inglese 5-09-2006 18:33 Pagina 133
11
22
33
44
Traditional assembly with Series 200 mounting plates
Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.
Tighten the fixing screw.
An «L» value of 0,7 mm between door and cabinet side is achieved on final assembly.
«Key hole» safety feature.
134
Series 600 Mini hinge
Assembly instructions
82-160 inglese 5-09-2006 18:33 Pagina 134
135
Series B
Ser
ies
B h
inge
s
82-160 inglese 5-09-2006 18:33 Pagina 135
Series B for wooden doors
Technical features
138
Series B hinges provide a solution to a number of applications that feature mouldededge profiles or half-inlay doors.Dimensions of the 35 mm cup.
Approx. number of hinges required according to the doordimension and weight
Adjustments
Mounting plates
Compensated side adjustment from -1,5 mm to +4,5 mm
Height adjustment ±2 mm
Depth adjustment with Series 200 mounting plates +2,8 mm
Depth adjustment with DOMI® snap-on mounting platesfrom -0,5 mm to +2,8 mm
Anti-sliding safety stop
Symmetrical and asymmetrical bright nickel plated steel ordie-cast Series 200 mounting plates
Snap-on assembly on DOMI® mounting plates
Positioning with pre-determined stop on traditional Series200 mounting plates
N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws
Width of the door Weight of the door (N)
Hei
ght
of t
he d
oor
Inglese pag 138-139 6-09-2006 10:24 Pagina 1
Series B for wooden doors
Drillings and fixings
139
Wood screw
Ser
ies
B h
inge
s
Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: CB...2A99
Fill this position with the chosen letter or number.
Inglese pag 138-139 6-09-2006 10:24 Pagina 2
Series B 110°
9 mm deep metal cup
110° opening
Possible drilling distance on the door (K): from 3 to 18 mm
Compatible with all traditional Series 200 mounting platesand with all Domi® snap-on mounting plates
Technical information
Space needed to open the door
The above values are calculated onthe assumption that the doors havesquare edges.They are reduced if the doors haveradiussed edges.
Projection of the door
Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.
With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind theabove L-K-T values.
T= 16 18 20 22 24 26 28
K=3 A= 0,0 0,0 0,0 0,0 0,3 1,4 20,7
K=4 A= 0,0 0,0 0,0 0,0 0,4 16,9 19,7
K=5 A= 0,0 0,0 0,0 0,0 0,5 15,9 18,7
K=6 A= 0,0 0,0 0,0 0,0 0,7 14,9 17,7
K=7 A= 0,0 0,0 0,0 0,0 11,3 13,9 16,7
K=8 A= 0,0 0,0 0,0 0,0 10,3 12,9 15,7
K=9 A= 0,0 0,0 0,0 0,0 9,3 11,9 14,7
K=10 A= 0,0 0,0 0,0 6,0 8,3 10,9 13,7
K=11 A= 0,0 0,0 0,0 5,1 7,3 9,9 12,7
K=12 A= 0,0 0,0 0,0 4,1 6,3 8,9 11,7
K=13 A= 0,0 0,0 1,4 3,3 5,3 7,9 10,7
K=14 A= 0,0 0,0 0,7 2,6 4,5 6,9 9,7
K=15 A= 0,0 0,0 0,2 2,0 3,8 5,9 8,7
K=16 A= 0,0 0,0 0,0 1,4 3,2 5,0 7,7
K=17 A= 0,0 0,0 0,0 1,0 2,7 4,4 6,7
K=18 A= 0,0 0,0 0,0 0,7 2,2 3,9 5,7
“C” value
C=5,5 + K+ A
140
Inglese pag 140-141 6-09-2006 10:24 Pagina 1
Arm 0
CA CBA2A99
H= 1 + K - (D)
Use these formulas to determine the type ofhinge arm, the drilling distance “K” and theheight of the mounting plate “H” which isnecessary to solve each application problem.
CA sprung hinge
PackingBoxes 150 pcs.Pallets 3600 pcs.
Series B 110°
141
9
Ser
ies
B h
inge
s
Inglese pag 140-141 6-09-2006 10:24 Pagina 2
Series B
142
82-160 inglese 5-09-2006 18:33 Pagina 142
143
11
22
33
44
11
22
33
44
Traditional assembly with Series 200 mounting plates Assembly with DOMI® snap-on mounting plates
Locate the lugs on the mounting plate into the recesses beneath thearm.
Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.
Tighten the fixing screw.
An «L» value of 0,7 mm between door and cabinet side is achieved on final assembly.
«Key hole» safety feature.
Gently rotate the door in the direction shown.
Then press lightly on the end of the arm to secure the catch.
To remove the hinge from the mounting plate, press gently in the placesshown by the arrows.
Series B Assembly instructions
Ser
ies
B h
inge
s
82-160 inglese 5-09-2006 18:33 Pagina 143
144
82-160 inglese 5-09-2006 18:33 Pagina 144
145
Domi® mounting plates
Dom
i®m
ount
ing
plat
es
82-160 inglese 5-09-2006 18:33 Pagina 145
146
● DOMI® snap-on mounting plates. For hinges Series 100, 200, Logica, F, 400 and B.
● Depth and height adjustment by cam
● 21+32 mm drilling
PackingBoxes 300 pcs.Pallets 7200 pcs.
screw-on
Drilling ø5x11
H= 0 1 2 3 4 5 6
BAPGR
BAP7Rknock-in
Drillingø10x11,5
H= 0 1 2 3 4 5 6
BAP3Rscrew-onB 3,5 DIN 7983
H= 0 1 2 3 4 5 6
BAPMRscrew-on
Drillingø10x11,5
H= 0 1 2 3 4 5 6
Die-cast mounting plates Die-cast mounting plates
Domi® mounting plates
Inglese pag 146-147 6-09-2006 10:25 Pagina 1
148
screw-on
Drilling ø5x7,5
H= 0 2 3 4 6
screw-on
Drilling ø5x11
H= 0 2 3 4 6
screw-onB 3,5 DIN 7983
H= 0 2 3 4 6
● Cruciform DOMI® snap-on mounting plates. For hinges Series 100, 200, Logica, F, 400 and B.
● Depth adjustment by cam
● 37x32 mm drilling
PackingBoxes 300 pcs.Pallets 7200 pcs.
BAVGL/F
BAV3L/F
BAV4L/F
BAV7L/Fknock-in
Drilling ø10x10
H= 0 2 3 4 6
BAVML/Fscrew-on
Drilling ø10x11,5
H= 0 2 3 4 6
Steel mounting plates
screw-on
Drilling ø5x7,5
H= 0 2 3 4 6 9 12(c)
screw-on
Drilling ø5x11
H= 0 2 3 4 6 9 12(c)
screw-onB 3,5 DIN 7983
H= 0 2 3 4 6 9 12(c)
BAVGE/F
BAV3E/F
BAV4E/F
BAV7E/Fknock-in
Drilling ø10x10
H= 0 2 3 4 6 9 12(c)
BAVME/Fscrew-on
Drilling ø10x11,5
H= 0 2 3 4 6 9 12(c)
Die-cast mounting plates
Domi® mounting plates
82-160 inglese 5-09-2006 18:34 Pagina 148
149
Traditional mounting plates
Trad
itio
nal m
ount
ing
plat
es
82-160 inglese 5-09-2006 18:34 Pagina 149
PackingBoxes 600 pcs.Pallets 14400 pcs.
knock-in
Drilling ø10x10
H= 0 1 2 3
B2S7H
screw-onB 3,5 DIN 7983
H= 0 1 2 3
B2S3H
screw-on
Drilling ø5x11
H= 0 1 2 3
B2SGH
B2S4Hscrew-on
Drilling ø5x7,5
H= 0 1 2 3
● Asymmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.● For hinges series 800 use steel mounting plates only● 28x32 mm drilling
screw-onB 3,5 DIN 7983
H= 0 3 6 9 12(c)
B2S3B
screw-on
Drilling ø5x11
H= 0 3 6 9 12(c)
B2SGB
Steel mounting plates Die-cast mounting plates
150
Traditional mounting plates
82-160 inglese 5-09-2006 18:34 Pagina 150
B2VLHscrew-on
Drillingø10x7,5
H= 0 2 3 4 6 9
B2VNH (see page 152)screw-on
H= 0 2 3 4 6 9
rapido
Drillingø10x11,5
H= 0 2 3 4 6 9
B2VRH
screw-onB 3,5 DIN 7983
H= -2(s)0 2 3 4 6 9
B2V3H
B2VGH
B2V7Hknock-in
Drilling ø10x10
H= 0 2 3 4 6 9
● Symmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, 800, F, 400, 600, 900 and B.● 37x32 mm drilling
● Height adjustment ± 2 mmATTENTION! Mounting plates with negative value can be used on D-G-P arms only
PackingBoxes 600 pcs.Pallets 14400 pcs.
screw-on
Drilling ø5x7,5
H= 0 2 3 4 6 9
B2V4H
B2VMHscrew-on
Drilling ø10x10
H= 0 2 3 4 6 9
Steel mounting plates Steel mounting plates
B2VKH (see page 153)screw-on
Drillingø5x11,5
H= 0 2 3 4 6 9
screw-on
Drillingø3x3
H= 0 2 3 4 6 9
B2V1H (see page 153)
Drillingø5x11 ø5x7,5
151
Traditional mounting plates
screw-on
Drillingø5x11
H= -2(s)0 2 3 4 6 9
Trad
itio
nal m
ount
ing
plat
es
82-160 inglese 5-09-2006 18:34 Pagina 151
● Symmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.
● 37x32 mm drilling● Height adjustment ±2 mmATTENTION! Mounting plates with negative value can be used on D-G-P arms only
PackingBoxes 600 pcs.Pallets 14400 pcs.
screw-onB 3,5 DIN 7983
H= -1(R) 0 2 3 4 6 9 12(c)18(v)
B2V3B
B2VNH
screw-on
Drilling ø5x11
H= -1(R) 0 2 3 4 6 9 12(c)18(v)
B2VGB B2V7Bknock-in
Drilling ø10x10
H= -1(R) 0 2 3 4 6 9 12(c)
screw-on
Drilling ø5x7,5
H= -1(R) 0 2 3 4 6 9 12(c)18(v)
B2V4BDie-cast mounting plates Die-cast mounting plates
● Symmetrical cruciform mounting plates. For hinges Series 100, 200, Logica, 800, F, 400, 600, 900 and B.
● Easy height adjustment ±2 mm
● One only expandable dowel. It makes easier the centering in the holes on the side of the furniture
● It is available both for single and for twin applications
The mounting plate is supplied with premountedscrews, ready to be fixed to the cabinet side.37x32 mm drilling.
Tighten both screws to fix the mountingplate to the cabinet side.
To adjust the height of the door, loosen only the hex-head screw shown by the arrow. Adjust as required.
After adjustment, re-tighten the same screw.
+2
Assembly
Adjustment
-2
152
Traditional mounting platesTwin applications
Traditional mounting plates
82-160 inglese 5-09-2006 18:34 Pagina 152
B2VKHscrew-on
Drillingø5x11,5
H= 0 2 3 4 6 9
screw-on
Drillingø3x3
H= 0 2 3 4 6 9
B2V1H
● Symmetrical cruciform mounting platesFor hinges Series 100, 200, Logica, 800, F, 400, 600, 900 and B
● 37x32 mm drilling● Easy height adjustment ±2 mm
PackingBoxes 600 pcs.Pallets 14400 pcs.
Steel mounting plates Steel mounting plates
The mounting plate is supplied withpremounted screws, ready to befixed to the cabinet side.37x32 mm drilling.
Tighten both screws to fixthe mounting plate to thecabinet side.
To adjust the height of the door,loosen only the hex-head screwshown by the arrow. Adjust asrequired.
After adjustment, re-tighten the same screw.
+2
Assembly
Adjustment
-2
knock-in
Drilling ø10x11,5
H= 0 2 3
B2P7Escrew-onB 3,5 DIN 7983
H= 0 2 3 4 6 9
B2R3E
screw-on
Drillingø5x11
H= 0 2 3 4 6 9
B2RGE B2R7Eknock-in
Drillingø10x11,5
H= 0 2 3
● Straight and cruciform mounting plates
For hinges Series 100, 200, Logica, F, 400, 600, 900 and B● Height adjustment ±2 mm by cam
Packing heigths 0, 2, 3, 4Boxes 600 pcs.Pallets 14400 pcs.
Packing heigths 6, 9Boxes 300 pcs.Pallets 7200 pcs.
Straight die-cast mounting plates Cruciform die-cast mounting plates
Cruciform die-cast mounting plates
153
Traditional mounting platesEasy height adjustment
Traditional mounting plates
Trad
itio
nal m
ount
ing
plat
es
82-160 inglese 5-09-2006 18:34 Pagina 153
screw-onB 3,5 DIN 7983
B2V3BW9R
screw-on
Drilling ø5x11
B2VGBW9R
● Variable die-cast mounting plates for angled assembly from -7,5° to +7,5° and intermediate degrees,
for special assemblies. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.
● An almost infinite variety of angle door applications is possible using variable-angle mounting plates in conjunction with one of Salice’s range of angled-arm hinges.
PackingBoxes 600 pcs.Pallets 14400 pcs.
The drilling distance of the variable-angle mounting plates differs with the angle to beused. The following are some examples:
154
Traditional mounting plates
82-160 inglese 5-09-2006 18:34 Pagina 154
screw-on
Drillingø 5x11
B2VGBW9
● Die-cast angled mounting plates for assembly at 15°For hinges Series 100, 200, Logica, F, 400, 600, 900 and B
PackingBoxes 600 pcs.Pallets 14400 pcs.
screw-onB3,5 DIN 7983
B2V3BW9
screw-on
Drillingø 5x11
B2VGBW9S
● Variable die-cast mounting plates for angled assembly from +10° to +30° and intermediate degrees, for special assemblies. For hinges Series 100, 200, Logica, F, 400, 600, 900 and B.
● An almost infinite variety of angle door applications is possible using variable-angle mounting plates in conjunction with one of Salice’s range of angled-arm hinges.
PackingBoxes 300 pcs.Pallets 7200 pcs.
screw-onB3,5 DIN 7983
B2V3BW9S
155
Traditional mounting plates
Traditional mounting plates
Trad
itio
nal m
ount
ing
plat
es
82-160 inglese 5-09-2006 18:34 Pagina 155
Angled mounting plates for assembly at 15°
Variable-angle mounting plate for angled assembly from +10° to +30° and intermediate angles by adjusting the set screw indicated
● Die-cast mounting plates for special assemblies
For hinges Series 100, 200, Logica, F, 400, 600, 900 and B● An almost infinite variety of angle door applications is possible using variable-angle mounting plates in
conjunction with one of Salice’s range of angled-arm hinges; from -45° to +70°.
Variable-angle mounting plate for angled assembly from +7,5° to -7,5° and intermediate angles by adjusting the set screw indicated
Assembly example with a 105° angle
Assembly examples from 100° to 120° angles.
Assembly examples from 82,5° to 97,5° angles
T
156
Traditional mounting plates
82-160 inglese 5-09-2006 18:34 Pagina 156
Smove
159
Sm
ove
82-160 inglese 5-09-2006 18:34 Pagina 159
Smove
D005SNG
PackingBoxes 250 pcsCartons 2000 pcs
Smove
D005SNB
Packing Boxes 250 pcsCartons 2000 pcs
Technical information about the installation of SMOVE D005SN to be recessed
Insert Smove D005 into thecabinet side opposite the hinges. For an optimal performance,we suggest that SmoveD005 is positioned at thecentre of the side panel.
It is suggested for doorsfrom 450 mm to 600 mmwidth.
For wood-based and alu-framed doors over 1600 mm height, it may be necessary to use twoSmove, one to be insertedinto the upper part and thesecond into the lower part of the cabinet side opposite the hinges.
Smove D005SN
160
82-160 inglese 5-09-2006 18:34 Pagina 160
Sm
ove
165
Drill a hole Ø 10 mm and min. 50 mm depth in the cabinet.Insert Smove into the hole.
Smove to be recessedInstallation of Smove to be recessed
161-208 Inglese 6-09-2006 9:35 Pagina 165
D064SNXR
D064SNGR = D064SNBR =
D063SNXR
D063SNGR = D063SNBR =
D064SNXN
D064SNGN = D064SNBN =
D060SNXN
D060SNGR = D060SNBR =
Sm
ove
167
D060SNGR = D060SNBR =
D060SNXR
Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew37x32 mm drillingWithout assembly stop device
D065SNGR = grey - To be fixed with euroscrew D065SNBR = beige - To be fixed with euroscrew
PackingCartons 500 pcsPallets 12000 pcs
Longitudinal plastic adapter forSmove D005, D006, D008,D009 e D010To be fixed with dowels Without assembly stop device
PackingCartons 500 pcsPallets 12000 pcs
Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew37x32 mm drillingWith assembly stop device
PackingCartons 500 pcsPallets 12000 pcs
Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew28x32 mm drillingWith assembly stop device
PackingCartons 500 pcsPallets 12000 pcs
Adapters to be screw fixed on the cabinet
Plastic adapter forSmove D005, D006 and D008To be fixed with woodscrew28x32 mm drillingWithout assembly stop device
PackingCartons 500 pcsPallets 12000 pcs
greybeige
greybeige
greybeige
greybeige
greybeige
161-208 Inglese 6-09-2006 9:35 Pagina 167
Sm
ove
169
Adapters to be screw fixedon the cabinetSmove application with adapter to be screw fixed on the cabinet
Adapter with assembly stop deviceInsert Smove into the adapter. Place the adapter in the position in the cabinet appropriate to the version of Smove to be installed, using the assembly stop device for final positioning.
Adapter without assembly stop deviceInsert Smove into the adapter. Place the adapter in the position in the cabinet appropriate to the version of Smove to be installed, based on the dimensions indicated for the type of adapter.
161-208 Inglese 6-09-2006 9:35 Pagina 169
174
161-208 Inglese 6-09-2006 9:36 Pagina 174
175
Sliding system for Concertina doors
Slid
ing
syst
em f
orC
once
rtin
a do
ors
161-208 Inglese 6-09-2006 9:36 Pagina 175
176
The Salice system for Concertina-doors has been designed to open both doors on one side only, giving good access to the interior of the cabinet. Space taken up by the door in the maximum open position is reduced to a minimum (approximately 80 mm).
A nylon strip is available in orderto prevent insertion of objects or fingers between doors. This alsomakes the system dustproof.
To ensure that the door closes fully and securely,particularly when there is some curvature ofthe door, a locating device is available.
Sliding system for Concertina doorsTechnical features
161-208 Inglese 6-09-2006 9:36 Pagina 176
177
Adhesive finger-protection stripF1SBA1 whiteF1SBA3 blackF1SBAY neutral
F1RFAY Locating device for door
F1PVAY Long sliding block
F1PXAY Sliding blockF1C169 Hinge for sliding block
F1CZ69 For aluminium framed doors
F1CXE9screw-on
F1C0E9knock-inDowels Ø 8x11,5
For aluminium framed doors
Central hinge
Sliding system for Concertina doorsElements of the system
F1CO69 D206BK5Hinge for the Practical systemof aluminium framed doors
Central hinge for the Practicalsystem of aluminium frameddoors
Slid
ing
syst
em f
orC
once
rtin
a do
ors
161-208 Inglese 6-09-2006 9:36 Pagina 177
178
+2 mm -2 mm
+2,5 mm
Calibrated height adjustment
Depth adjustment
Height adjustment of hinges assembled with the sliding components is achieved through a cam.Through this alignment a parallel movement of the component in the track is achieved. The result is a smooth movementwithout any binding.Attention! The sliding block does not have a load-bearing function. Therefore it must slide freely inside the track.
Depth adjustment of the hinges mounted on the sliding component is achieved through the fixing screw of the same hinge.Depth adjustment should be made in conjunction with the hinges mounted on the opposite door.This adjustment is useful to keep the “L” value constant all along front of the furniture.
Sliding system for Concertina doorsAdjustments
161-208 Inglese 6-09-2006 9:36 Pagina 178
179
F1GIA1…………
F1GIA3…………
F1GIAG…………
F1GIAP…………
F1GFA1…………
F1GFA3…………
F1GFAG…………
F1GFAP…………
Slid
ing
syst
em f
orC
once
rtin
a do
ors
Colours
white
black
grey
beige
Mount the hinges of the fixed door on tothe mounting plates on the cabinet side.We recommend the use of Salice hingepart number C2A6A99 with BAR3Rmounting plate or similar.
Assembly
Position the sliding block inside thetrack by rotating it 90°.
Lock the sliding block into position by turning the marked in red lever.
barb-fixed screw-on B 3,5 DIN 7982
Standard lengths available: 590 mm, 880 mm, 1180 mm. Non-standard lengths can be supplied subject to a minimum order quantity of 900 pieces. The required length should be expressed in millimetres in the last four digits of the product code occupied by the dashes.
Sliding system for Concertina doors
161-208 Inglese 6-09-2006 9:36 Pagina 179
180
Drilling distances without finger-protection strip
Drilling distances with finger-protection strip
Central assembly:Narrow part to be mounted on the door which is fixed to the cabinet side.Wider part to be mounted on the moving door.
Central assembly:Narrow part to be mounted on the door which is fixed to the cabinet side.Wider part to be mounted on the moving door.
To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
Sliding system for Concertina doorsApplication into the top and doorsSolution with plastic track barb-fixed or screw-fixed
161-208 Inglese 6-09-2006 9:36 Pagina 180
182
Sliding system for Concertina doorsApplication into the top and doorsSolution with barb-fix and screw-fix plastic track
Glass doors with the Practical system of aluminium framed doorsDistance to be used when finger-protection strip and two-screw (D206BS5) or four-screw (D206BS5L) corner joint are used.
Glass doors with the Practical system of aluminium framed doorsDistance to be used when finger-protection strip and four-screw corner joint (D206BS5L) are used.
Central assembly:Narrow part to be mounted on the door which is fixed to the cabinet side.Wider part to be mounted on the moving door.
Central assembly:Narrow part to be mounted on the door which is fixed to the cabinet side.Wider part to be mounted on the moving door.
To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
161-208 Inglese 6-09-2006 9:36 Pagina 182
183
F1C169
F1PXAY
F1CXE9
F1COE9
F1RFAY
F1CZ69
F1CA69
F1PVAY
F1C069
F1C169
F1PXAY
F1CXE9
F1GFA……
.
F1KFX3X880
F1KFX 3 X880X590 = 590 mmX880 = 880 mm1180 = 1180 mm
300
300
600
600
300
300
300
300
300
200
75
150
7200
7200
14400
14400
7200
7200
7200
7200
7200
25
25
75
25
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
m
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
Components of the system Boxes Pallets
Adhesive finger-protection strip
Tracks 880 mm - 1180 mm
Tracks 590 mm
pcs.
pcs.
pcs.
pcs.
Sliding system for Concertina doors
Packaging (standard packaging)
KIT- Packaging
Code number composition (example):
Track colour code number:1 = White3 = BlackG = GreyP = Beige
Part of code number identifying system forConcertina doors
Slid
ing
syst
em f
orC
once
rtin
a do
ors
Available in 3 lengths
and 4 colours
Track length code number:
161-208 Inglese 6-09-2006 9:36 Pagina 183
200
161-208 Inglese 6-09-2006 9:37 Pagina 200
201
Connecting fittings
Con
nect
ing
fitt
ings
161-208 Inglese 6-09-2006 9:37 Pagina 201
202
Simple nylon connecting fittingwith cover cap for lever, knock-in
G98YA15 white colour G98YAG5 grey colour G98YA3V black colour G98YAUV brown colour
Cover cap for lever
S98X83A1Y white colour S98X83AGY grey colour S98X83A3Y black colour S98X83AUY brown colour
Drilling pattern
Flush assembly with internal fitting
Flush assembly with external fitting
PackingBoxes 1200 pcs.Pallets 28800 pcs.
Simple nylon connecting fitting, knock-in
G98XA15 white colour G98XAG5 grey colour G98XA3V black colourG98XAUV brown colour
PackingBoxes 1200 pcs.Pallets 28800 pcs.
Connecting fittings Single fitting
Drilling pattern
161-208 Inglese 6-09-2006 9:37 Pagina 202
203
All versions of the connecting fittings are available in the following standard colours:
Insertion tool for connecting fittings
D98XAX3PEfor fittings G98X-G98Y
Connecting fittings
Con
nect
ing
fitt
ings
161-208 Inglese 6-09-2006 9:37 Pagina 203
204
1231
AssemblyInsert the connecting fitting in one of the two panels to be connected.Introduce the threaded part of the connecting fitting into the hole on the second panel, taking care that thelever is in the raised, open position.
Bring the two panels together and turnthe lever all the way down.
While rotating, the threaded part pullsthe two panels together, joining them in asecure way. The metal thread is drivenfirmly into the inner walls of the 10 mmhole.
DisassemblyReturn the lever to the open position.Separate the two elements. Nothingremains inserted in the 10 mm hole.
Connecting fittingsSingle fitting - Assembly and disassembly instructions
161-208 Inglese 6-09-2006 9:37 Pagina 204
205
Accessories
Acce
ssor
ies
161-208 Inglese 6-09-2006 9:37 Pagina 205
206
S6XX83C1S2XX83A1
S2BX83H9
S8XX83H9
S2MX83H9
S8CX83H9
S9CX83H9S9XX83C1
S9XX83H9
S6XX83C1Plastic screw cover cap withsymmetrical printed logo
For all Series 600 hinges
S6SX83C1 S6DX83C1Plastic screw cover cap withasymmetrical printed logo
For all Series 600 hinges
Symmetrical plastic screw covercap, it can be personalised onrequest
For all Series 100, 200, Logica,F and 400 hinges
Symmetrical steel screw covercap, it can be personalised onrequest
For all Series 100, 200,Logica, F and 400 hinges
Symmetrical steel screw covercap, it can be personalised onrequest
For all Series 800 hinges
Symmetrical steel screw covercap with embossed logo
For all Series 100, 200, Logica,F and 400 hinges
Symmetrical steel screw covercap with embossed logo
For all Series 800 hinges
Symmetrical steel screw covercap with embossed logo
For all Series 900, F hinges andcomplementary hinges Series 200
Symmetrical plastic screw covercap, it can be personalised onrequest
For all Series 900, F hinges andcomplementary hinges Series 200
Steel symmetrical screw covercap, it can be personalised onrequest
For all Series 900, F hinges andcomplementary hinges Series 200
AccessoriesCover caps
161-208 Inglese 6-09-2006 9:37 Pagina 206
208
SFA586XG
S2A786XGS6A786XG
P2CTAX3 P2CBAX3
P2CTA13 P2CBA13
AccessoriesFancy covers for glass-door hinge cup
Spacer for hinges with 26 mmdiameter
To be used to reduce the cupdrilling depth by 1,5 mm.
Spacer for hinges with 40 mmdiameter
To be used to reduce the cupdrilling depth by 1.5 mm.
Spacer for hinges with 35 mmdiameter
To be used to reduce the cupdrilling depth by 1,4 mm.
Plastic, black Plastic, black
AccessoriesSpacers for hinges
Plastic, lacquered black Plastic, lacquered black
161-208 Inglese 6-09-2006 9:37 Pagina 208
209
P2CTAX1 P2CBAX1
P2CTA08 P2CBA08
P2CTAOW P2CBAOW
P2CTA06 P2CBA06
P2CTA09 P2CBA09
Plastic, white Plastic, white
Plastic, bright gold effect Plastic, bright gold effect
Plastic, gold effect Plastic, gold effect
Plastic, bright chrome
Plastic, silver effect
Plastic, bright chrome
Plastic, silver effect
Acce
ssor
ies
161-208 Inglese 6-09-2006 9:37 Pagina 209
Silentia
�
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:17 Pagina 1
Silentia
2
Silentia, the hinge withdecelerating closing action,is technically revolutionary and aesthetically leading-edge. The decelerating system ishidden from view and combined with the hinge components;it does not alter the cabinet design and it confers high perceived value in both functional and aesthetic terms.
Silentia hinges retain the samefeatures as other Salice hingeswithout the deceleration system. They are compatible with alltraditional series 200 mounting plates and with allDomi snap-on mounting plates and have the same adjustment features and functional applications.
Silentia provides real solutions to those furniture producers who need to confer quality on their products by meansof range completeness, functionality with style and the concept of silent and smooth operation.
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:17 Pagina 2
51
Series 700 hinges
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:20 Pagina 51
52
Technical features Silentia - Serie 700
Bright nickel plated steel cup and arm.Dimensions of the Ø 35 mm cup.
Constant «L» value of 0,7 mm (it does not change during side adju-stment).
Approx. number of hinges required according to the door dimension and weight.
Width of the door Weight of the door (N)
Hei
ght
of t
he d
oor
Adjustments.
Compensated side adjustment from -1.5 mm to +4.5 mm.Height adjustment ±2 mm.Depth adjustment with Series 200 mounting plates +2.8 mm.Depth adjustment with DOMI® snap-on mounting platesfrom -0.5 mm to +2.8 mm.Anti-sliding safety stop.
Mounting plates.
Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates. Snap-on assembly on DOMI® mounting plates.Positioning with pre-determined stop on traditional Series 200 mounting plates.
N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws.
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:20 Pagina 52
53
I J Q
7 2
Drillings and fixings
Wood screw
Dowel
Rapido
Attention:It is essential to drill the door as specified for theperfect functioning of the hinge.
110° opening and complementary hinges
Logica
Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letteror the number corresponding to your choice. I.e.: C7...6AD9
Fill this position with the chosen letter or number.
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:20 Pagina 53
54
S
A C
K
L
T
C
S
L
T
K
A
C=22.5 + K + A
T= 16 17 18 19 20 21 22 23 24 25 26
K=3 A= 0.7 0.9 1.1 1.3 1.6 1.9 2.2 2.6 3.2 4.4 5.7
K=4 A= 0.6 0.8 1.1 1.3 1.6 1.8 2.2 2.5 2.9 3.4 4.7
K=5 A= 0.6 0.8 1.0 1.3 1.5 1.8 2.1 2.4 2.8 3.2 3.7
K=6 A= 0.6 0.8 1.0 1.2 1.5 1.8 2.1 2.4 2.7 3.1 3.6
T= 16 17 18 19 20 21 22 23 24 25 26
K=3 L= 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.2 0.4 0.6 0.9
K=4 L= 0.0 0.0 0.0 0.3 0.5 0.7 0.9 1.1 1.4 1.6 1.8
K=5 L= 0.6 0.8 1.0 1.2 1.5 1.7 1.9 2.1 2.4 2.6 2.8
K=6 L= 1.5 1.8 2.0 2.2 2.4 2.7 2.9 3.1 3.3 3.6 3.8
Silentia - Series 700 - 110° opening
Technical information.
Hinges for min. 16 mm thick doors.13.5 mm deep cup.110° opening.Possible drilling distance on the door (K): from 3 to 6 mm.Compatible with all traditional Series 200 mounting platesand with all DOMI® snap-on mounting plates.
Space needed to open the door.
Projection of the door.
Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.
“C” value.
With this formula you can obtain the max. thickness of the moul-ded door that can be opened without touching adjacent carcase sides, doors or walls, whilst bearing in mind the above L-K-T values.
The above values are calculated on the assumption that the doors have square edges.They are reduced if the doors have radiussed edges.
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:20 Pagina 54
55
H= 15 + K - (D)
H= 6 + K - (D)
H= 10 + K - (D)
C7_6AD9
C7_6GD9
C7_6DD9
H= -2 + K + A C7_6PD9
Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H”which is necessary to solve each application problem.
Use the tables “Drillings and fixings” at page 53 to complete thecode number of the desired hinge.
PackingBoxes 300 pcs.Pallets 7200 pcs.
Arm 0
Arm 9
Arm 5
Arm 17
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:20 Pagina 55
60
H = 0 H = 9 H = 12
C7_6ND9
Silentia - Series 700 - Complementary hinges
Technical information.
Crampon hinges - For smaller spaces with 15x32 mm drilling.Hinges for min. 16 mm thick doors.13.5 mm deep cup.110° opening.Possible drilling distance on the door (K): from 3 to 8 mm.Compatible with all traditional Series 200 mounting plates, 28x32mm drilling.NOT COMPATIBLE with DOMI® snap-on mounting plates.
Use the tables “Drillings and fixings” at page 53 to complete thecode number of the desired hinge.
PackingBoxes 150 pcs.Pallets 3600 pcs.
Heights of mounting plates for every assembly.
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:21 Pagina 60
61
S2BX83H9 S2MX83H9
S2XX85H9 S2CX85H9
S2XF86 S2XX86
S2AF37X3 S2BF37XY
D247HSKSM
Stop device For 165° hinges, it limits opening at 120°.For 155° hinges, it limits opening at 125°.
Symmetrical steel screw cover cap, it can be personalised on request.
For all Series 100 and 200 hinges.
Symmetrical steel screw cover cap with embossed logo.
For all Series 100 and 200 hinges.
Steel flange cover cap withembossed logo.
Steel flange cover cap, it can be personalised onrequest.
Cup spacer to reduce the drilling depth for 155° and165° hinges.
S2XF86BT = 0.6 mmS2XF86AT = 1.2 mmS2XF86KT = 1.8 mm
Cup spacer to reduce the drilling depth for 94°, 105° and 110°.
S2XX86BT = 0.6 mmS2XX86AT = 1.2 mmS2XX86KT = 1.8 mm
Stop device For 165° hinges, it limits opening at 110°.For 155° hinges, it limits opening at 115°.
Cap cover for metal profile hinges.
Accessories
Silentia 2007 ediz. 04:SILENTIA 2007 ED 04 23-06-2008 9:21 Pagina 61
Push
�
Push 2007 Versione 6:Layout 1 23-06-2008 10:15 Pagina 1
2
PUSH
The PUSH-System is a self-opening system for the doors of all types of handlelessfurniture.
It consists of a series ofself-opening hinges, releasedevices (the PUSH) that can be fitted to the top, base or side panel of the cabinet, and retaining catches to be fitted to the back of the door.
The PUSH release device is available in a mechanical version that is fitted to the cabinet side using screws or adhesive strip, and a magneticversion that can be surface mounted using a holder or recessed into the edge of thecabinet.
The retaining catches can bepressure-fixed, screw-fixed or fitted with adhesive strip.
For doors over 1600 mm inheight, we suggest that youuse two mechanical releasecatches or a single magneticrelease device together with a supplementary magneticcatch.
Push 2007 Versione 6:Layout 1 23-06-2008 10:15 Pagina 2
3
DP3SNB
DP3SNG
DP3SN3
DP3SNBR
DP3SNGR
DP3SN3R
Mechanical release device to be screw-fixed
With assembly stop device.
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
- beige
- grey
- black
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
- beige
- grey
- black
Without assembly stop device.
Push 2007 Versione 6:Layout 1 23-06-2008 10:15 Pagina 3
4
PUSH
DP1SNB
DP1SNG
DP1SN3
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
- beige
- grey
- black
Installation of PUSH with adhesive system.
For correct application and to ensure optimal endurance, please follow the following procedure:
1) clean and degrease the cabinet sur face where the release device (PUSH) is to be installed using an acetone based cleaner;
2) remove the protective strip from the adhesive;
3) place the release device (PUSH) in position and apply a firm pressure for about oneminute;
4) allow a period of 12 hours to elapse before subjecting the PUSH-System to continuous usage.
- Mechanical release device with adhesive
With assembly stop device.
Push 2007 Versione 6:Layout 1 23-06-2008 10:15 Pagina 4
6
PUSH
DP29SNB DP29SNG DP29SN3
DP29SNBMC DP29SNGMC DP29SN3MC
DP29SNBI DP29SNGI DP29SN3I
DP29SNBR DP29SNGR DP29SN3R
- Retaining catches for wooden doors
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
- beige Retaining catch for woodendoor.Knock-in.
Retaining catch for wooden door and special assemblies.Knock-in.
- grey - black
- beige - grey - black
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
- beige Retaining catch for wooden door.With assembly stop device.Screw-on.
Retaining catch for wooden door.Without assembly stop device.Screw-on.
- grey - black
- beige - grey - black
N.B.: Drilling patterns at page 11.
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 6
7
DP29SNBA DP29SNGA DP29SN3A
DP29SNBB DP29SNGB DP29SN3B
DP29SNBP DP29SNGP DP29SN3P
Retaining catches for aluminium-frame doors
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
- beige Retaining catch for aluminium-frame door width = 35 - 45 mm.
Retaining catch for aluminium-frame door width = 17 - 35 mm.
- grey - black
- grey - black
PackingBoxes 300 pcs.
- beige Retaining catch for aluminium-frame door Practical.
- grey - black
N.B.: Drilling patterns at pages 12 and 13.
- beige
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 7
9
DP44XXBD DP44XXGD DP44XX3D
DP44XXBS DP44XXGS DP44XX3S
DP50SNO
Spacers and insertion tool for retaining catch
PackingBoxes 300 pcs.
PackingBoxes 300 pcs.
- beige Right spacer H = 4.8 mm.
Left spacer H = 4.8 mm.
- grey - black
- beige - grey - black
Orange insertion tool for retaining catch DP29SNX.
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 9
11
P = 14.8 + AP1 = 36.8 + TP2 = P - 1.3P3 = P1 - 16.5
A = X-D+4.5P = X-D+10.8X min = D+8
A = 26-18+4.5 = 12.5P = 26-18+10.8 = 18.8X min = 18+8 = 26
16.5 28
11.5
1.3
Drilling for wooden doors
Full-overlay door.
D = Door overlay on side and top of the cabinet.Drilling distance of retaining catch = D + 8.
Special assemblies.
Inset door.
D = Door overlay on side and top of the cabinet.
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 11
13
16.5 28
11.5 Min. 2.5
S P 1.3
TD
Min. 61
16.5 28
11.5
S P
1.3
T
Min. 2.5
D
Min.77
Profile with corner connector D206BS5.
D = Door overlay on side and top of the cabinet.P = Fixing distance of release device = 61 (min) - D + 1.3.
Profile with corner connector D206BS5L.
D = Door overlay on side and top of the cabinet.P = Fixing distance of PUSH = 77 (min) - D + 1.3.
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 13
14
DPMB289 DPMG289 DPM3289
DPMB2891 DPMG2891 DPM32891
DPAB289 DPAG289 DPA3289
DPAB2891 DPAG2891 DPA32891
Retaining catch to be inserted.ø 11,5 mm.
Retaining catch with adhesive.ø 11,5 mm.
Release device.ø 10 mm, 40 mm length.
PackingBoxes 250 pcs.Cartons 1500 pcs.
PackingBoxes 250 pcs.Cartons 1500 pcs.
Release device.ø 10 mm, 40 mm length.
PUSH - magnetic release device
- beige - grey - black
- beige - grey - black
Retaining catch to be inserted.ø 11,5 mm.
Retaining catch with adhesive.ø 11,5 mm.
Supplementary magneticcatch for doors over 1600mm in height.ø 10 mm, 40 mm length
PackingBoxes 250 pcs.Cartons 1500 pcs.
PackingBoxes 250 pcs.Cartons 1500 pcs.
Supplementary magneticcatch for doors over 1600mm in height.ø 10 mm, 40 mm length
- beige - grey - black
- beige - grey - black
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 14
15
DP80SNBR
DP85SNBR
DP84SNBR
DP82XXBR
DP80SNGR DP80SN3R
DP85SNGR
DP84SNGR
DP82XXGR
DP85SN3R
DP84SN3R
DP82XX3R
DP80SNB DP80SNG DP80SN3
DP83XXBR DP83XXGR DP83XX3R
Plastic adapter for release device.To be fixed with woodscrews.7.5x32 mm drilling.Without assembly stop devices.DP81SNXR = To be fixed with euroscrews.
Adjustable plastic adapter forrelease device. To be fixed with woodscrews.37x32 mm drilling.
PackingBoxes 500 pcs.Pallets 12000 pcs.
PackingBoxes 500 pcs.Pallets 12000 pcs.
Adjustable plastic adapter forrelease device. To be fixed with woodscrews.8x32 mm drilling.
Adjustable longitudinal plastic adapter for releasedevice. To be fixed with woodscrews.8+16 mm drilling.Screw cover to be orderedseparately.
PackingBoxes 500 pcs.Pallets 12000 pcs.
PackingBoxes 500 pcs.Pallets 12000 pcs.
Plastic adapter for release device.To be fixed with woodscrews.7.5x32 mm drilling.With assembly stop devices.DP81SNX = To be fixed with euroscrews.
PackingBoxes 500 pcs.Pallets 12000 pcs.
Adjustable double plasticadapter for release device. To be fixed with woodscrews.8+32 mm drilling.Screw cover to be ordered separately.
PackingBoxes 500 pcs.Pallets 12000 pcs.
- beige - grey - black
- beige - grey - black
- beige - grey - black
- beige - grey - black
- beige - grey - black
- beige - grey - black
Adapters
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 15
16
D
D
D+6
2.5
S
7.5
32
T
T
S
2.5
32
7.5
D
D
D+6
PUSH - Release device application
Release device application with adapter (DP80SN_R) with assembly stop devices.
Insert the release device into the adapter.Place the adapter to the top, the side or the base panel of the cabinet, using the assembly stop devices for final positioning.
Release device application with adapter (DP80SN_) without assembly stop devices.
Insert the release device into the adapter.Place the adapter to the top, the side or the base panel of the cabinet, using the drilling value 7.5x32 mm for final positioning.
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 16
18
2.5
5 26 Min.
10 Min.
8
32
26 Min
2.5
37
5
32 10 Min
Release device application with adapter (DP84SN_R) with assembly stop devices.
Insert the release device into the adapter.Place the adapter to the top, the side or base panel of the cabinet, using the assembly stop devices for final positioning.
Release device application with adapter (DP85SN_R) without assembly stop devices.
Insert the release device into the adapter.Place the adapter to the top, the side or base panel of the cabinet, using the drilling value of 37x32 mm for final positioning.
PUSH - Technical information - Release device application
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 18
19
1 2
T
S
ø 10
2.5
40 min
Retaining catch application.
1 - Retaining catch with adhesive.
Apply the retaining catch to the magnetic release device.Remove the protective strip from the adhesive.Close the door. In this way the retaining catch is positionedon the door.Reopen the door and apply a firm pressure to the retainingcatch to ensure a correct installation.
Attention:For a correct application and to ensure optimal endurance, we suggest these guidelines are followed:
1 - clean and degrease the door sur face where the retainingcatch is to be installed;2 - remove the protective strip from the adhesive;3 - place the retaining catch in position, in a place that is atroom temperature > 10° and apply a firm pressure for 10-15seconds.
After few seconds from the installation the retaining catch issuitable for the use. After 24h the max. hold is attained.
2 - Retaining catch to be inserted.
Apply the retaining catch to the magnetic release device.Close the door. The point of the retaining catch will show where to insert it.Reopen the door and press the retaining catch.
Application of the release device to be recessed.
Drill a hole Ø 10 mm and min. 40 mm depth in the top, the side or the base panel of the cabinet.Insert the release device into the hole.
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 19
21
Hinges Series 200
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 21
22
66
37
20.5
PUSH
The Series 200 make up an integrated systemof hinges developed to provide a solution to anysituation involving concealed hinges.Bright nickel plated steel cup and arm.Dimensions of the ø 35 mm cup.
Constant “L” value of 0.7 mm (it does not change during side adjustment).
Approx. number of hinges required according to the door dimension and weight
Width of the door Weight of the door (N)
Heig
ht o
f th
e d
oor
Adjustments
Compensating side adjustment from - 1.5 to + 4.5 mm.Height adjustment ± 2 mm.Depth adjustment with Series 200 mounting plates + 2.8 mm.Depth adjustment with DOMI® snap-on mounting plates from - 0.5 mm to + 2.8 mm.Anti-sliding safety stop.
Mounting plates
Symmetrical and asymmetrical bright nickel plated steel or die-cast Series 200 mounting plates.Snap-on assembly on DOMI® mounting plates .
Positioning with pre-determined stop on traditional Series 200mounting plates.
N.B. : Use POZIDRIVE No. 2 screwdrivers for all screws.
- Series 200 hinges Technical features
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 22
23
Drillings and fixings
Wood screw
Dowel
Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: C2...PA99
Fill this position with the chosen letter or number.
Rapido
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 23
24
PUSH
7.1 S
A C
K L
T
C
S
L
T
K
A
L min
A min
T= 16 17 18 19 20 21 22 23 24 25 26
K=3 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.4 3.7 5.1 6.5 7.8
K=4 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.1 2.7 4.1 5.5 6.8
K=5 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.1 2.6 3.1 4.1 5.4
K=6 A= 0.5 0.7 0.9 1.2 1.5 1.8 2.1 2.5 3.0 3.5 4.4
T= 16 17 18 19 20 21 22 23 24 25 26
K=3 L= 0.0 0.0 0.0 0.0 0.2 0.5 0.8 1.1 1.4 1.7 1.9
K=4 L= 0.0 0.0 0.3 0.6 0.9 1.2 1.4 1.7 2.0 2.3 2.6
K=5 L= 1.1 1.3 1.6 1.8 2.1 2.3 2.6 2.9 3.1 3.4 3.6
K=6 L= 2.0 2.3 2.5 2.8 3.1 3.3 3.6 3.8 4.1 4.3 4.6
- Series 200 hinges - 110° Opening
Technical information
When a greater opening angle is required.11 mm deep metal cup.110° opening.Possible drilling distance on the door (K): from 3 to 6 mm.Compatible with all traditional Series 200 mounting plates and with all DOMI® snap-on mounting plates.
Space needed to open the door
Projection of the door
Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting plate and K value = 3 mm.
“C” value
With this formula you can obtain the max. thickness of themoulded door that can be opened without touching adjacentcarcase sides, doors or walls, whilst bearing in mind the aboveL-K-T values.
C=20 + K+ A
The above values are calculated on the assumption that the doorshave square edges.They are reduced if the doors have radiussed edges.
Push 2007 Versione 6:Layout 1 23-06-2008 10:16 Pagina 24
25
H= 15 + K - (D)
H= 6 + K - (D)
H= -2 + K + A
H= 10 + K - (D)
C2...PA99
C2...PG99
C2...PP99
C2...PD99
Use these formulas to determine thetype of hinge arm, the drilling distance“K” and the height of the mounting plate“H” which is necessary to solve eachapplication problem.
Use the tables “Drillings and fix ings” at page 23 to complete the code number of the desired hinge.
PackingBoxes 300 pcs.Palletss 7200 pcs.
Arm 0
Arm 9
Arm 17
Arm 5
Push 2007 Versione 6:Layout 1 23-06-2008 10:17 Pagina 25
33
Hinges for metal profiles
Push 2007 Versione 6:Layout 1 23-06-2008 10:17 Pagina 33
34
H= 6 + 6 - (D)
H= -2 + 6 + A
H= 10 + 6 - (D)
C20PA99
C2OPG99
C2OPP99
C20PD99
H= 15 + 6 - (D)
PUSH
Technical information
Hinges for the Practical system have been developed for use with special metal profiles. The particular fix ing systemdoes not require any profile working. The hinge can be therefore assembled at any point of the frame.105° opening.Compatible with all traditional Series 200 mounting plates and with all DOMI® snap-on mounting plates.
PackingBoxes 150 pcs.Pallets 3600 pcs.
Arm 0
Arm 9
Arm 17
Arm 5
- 105° Opening
Push 2007 Versione 6:Layout 1 23-06-2008 10:17 Pagina 34
59
11
22
33
44
11
22
33
44L 0.7
Assembly instructions
Traditional assembly with Series 200 mounting plates.
Assembly with DOMI® snap-on mounting plates.
Place the hinge onto the mounting plate. Push the hinge up tothe pre-determined stop under the hinge arm.
Tighten the fixing screw.
An «L» value of 0.7 mm between door and cabinet side is achieved on final assembly.
«Key hole» safety feature.
Locate the lugs on the mounting plate into the recesses beneath the arm.
Gently rotate the door in the direction shown.
Then press lightly on the end of the arm to secure the catch.
To remove the hinge from the mounting plate, press gently in the places shown by the arrows.
Push 2007 Versione 6:Layout 1 23-06-2008 10:17 Pagina 59