sales catalog of hnk telecommunication products

Sales Catalog of HNK Telecommunication Products

Fiber Accessories

HNK OPTIC EQUIPMENT CO.,LIMITED


Fiber Connector

Fiber Connector Specification

FEATURES

Quick, easy installation；

High quality Zirconia PC ferrule；

900 micron, 2mm, 3mm cable applications；

Telcordia-style strain and relief boot.

STANDARDS COMPLIANCE

UL-V0 flammability rating

TIA/EIA-568-C.3 (Optical Fiber Cabling Components Standard)

ANSI/TIA/EIA-455B (Standard Test Procedure for Standard Fiber Optic Fibers, Cables, Connecting &

Terminating Devices, and Other Components)

IPC-8497-1 (Cleaning Methods & Contamination Assessment for Optical Assembly)

DESIGN & MATERIALS

Connector Ferrule Zirconia Ceramic

Alignment Sleeve Zirconia or Phosphor Bronze

Connector Body UL 94V-0 rated Thermoplastic to meet standard

flammability ratings

Crimp Insert/Crimp Tube Nickel-Plated Brass/Thermoplastic Elastomer Polymer

Dust Cap Nylon or PVC

Strain Relief Boot Flame retardant (UL-Rated 94-V0) polymer

Connector Style SC, FC, ST, LC, MTRJ, E2000

Polish PC, UPC, APC

Capillary Diameter Tolerance(Single Mode) 126 ± 0.5μm

Capillary Diameter Tolerance(Multimode) 127 ± 0.5μm

Ferrule Diameter 2.5 ± 0.001mm

ENVIRONMENTAL & MECHANICAL DATA

Operating Temperature -40 to +85º C

Storage Temperature -40 to +85º C

Temperature Cycling (61300-2-18) -40 to +75º C, 40 cycles=0.2dB change

High Temperature (61300-2-18) 70˚c for 96Hrs, <0.4dB change

Damp Heat(61300-2-19) 40º C at 93%RH for 96 Hrs, <0.4dB change

Vibration-Mated Pair (61300-2-1) 10-55Hz, 1.5mm P to P <0.2dB change

Mating Durability (61300-2-2) 500 Mating Cycles, clean every 25, <0.2dB change

OPTICAL PERFORMANCE DATA

Item Single mode Multimode

PC UPC APC 62.5/125 50/125 50/125 10G

Insert Loss/connector (single Fiber) 0.2dB Max. (0.15dB typ.) 0.3dB Max. (0.25dB typ.)

Return Loss ≥45 dB ≥50 dB ≥60 dB N.A

Insert Loss/MTRJ Connector 0.5dB Max. (0.45dB typ.) 0.5dB Max. (0.45dB typ.)

Pull Strength ≥98N ≥98N


Fiber Connector

SC CONNECTOR

SC connector is a push pull type, gives an audible click when

mates into its adaptor and can be tuned in 4 positions to provide

the lowest insertion loss. It comprises of a body with ceramic

ferrule/spring/crimp barrel assembly plus a crimp over sleeve

and rubber boot. These connectors are suitable for, 900μm and

2-3mm cables. The connector is precision made to demanding

specifications. The combination of a ceramic ferrule with

precision polymer housing pro-vides consistent long-term

mechanical and optical performance.

COMPLIANCE (Standard)

Compliant with IEC 61754-4.

APPLICATIONS

Intra-building Backbone, LAN cross connects, Local and Wide Area

Networks, Data transmission.

CATV, MAN, WAN, Test & Measurement, Industry, Medical and Sensors.

SPECIFICATIONS

Ferrule Diameter 2.5mm

Coupling Type Snap, Push Pull type

Shell Color Blue (SM/PC), Green(SM/APC), Beige (MM)

2mm or 3mm Boot Color Blue (SM/PC), Green(SM/APC), Beige (MM)

900μm Boot Color Blue (SM/PC), Green(SM/APC), Beige (MM)

Shell Connector versions available for 2mm, 3mm Cable, 900μm Buffered Fiber, Simplex & Duplex

Shell Tensile Strength Cable retention >50N for 2mm boot versions

>98N for 3mm & 0.9mm

ORDERING INFORMATION

PART NUMBER DESCRIPTION

CN-MSC1 SC/PC Multimode Connector

CN-SSC1 SC/PC Single mode Connector

CN-SSC2 SC/UPC Single mode Connector

CN-SSC3 SC/APC Single mode Connector

CN-SSC4 SC/APC 8º Single mode Connector


Fiber Connector

ST CONNECTOR

ST connector features a bayonet locking mechanism to reduce

the risks of accidental disconnection of fiber connections. This

connector is comprised of a Nickel plated Brass body and a

Ceramic ferrule/spring/crimp barrel assembly plus a crimp over

sleeve with rubber boot. These connectors are suitable for,

900μm and 2-3mm cables.

The connector is precision made and manufactured to

demanding specifications. The combination of a Ceramic ferrule

with precision metal housing provides consistent long-term


COMPLIANCE

Compliant with IEC 61754-2

APPLICATIONS

Data Communication Networks (Multimode, rarely single-mode; APC not possible).

SPECIFICATIONS


Coupling Type Bayonet fitting

2mm or 3mm Boot Color Red/Black/Yellow

900μm Boot Color Red/Black/Yellow

Shell Connector versions available for 2mm, 3mm Cable, 900μm Buffered Fiber

Shell Tensile Strength Cable retention >50N for 2 mm boot versions




CN-MST1 ST/PC Multimode Connector

CN-SST1 ST/PC Single mode Connector

CN-SST2 ST/UPC Single mode Connector


Fiber Connector

FC CONNECTOR

FC connector is comprised of a Nickel plated Brass body and a

Ceramic ferrule/spring/crimp barrel assembly plus a crimp over

sleeve and rubber boot. This connector has a screw thread

fitting into the adaptor to provide a secure connection and is

suitable for 900μm, 2-3mm cable. The connector is precision

made and manufactured to demanding specifications. The

combination of a Ceramic ferrule with precision Nickel plated

Brass housing provides consistent long-term mechanical and

optical performance. The FC connector is available in single

mode UPC and APC versions as well as multimode.

COMPLIANCE

Compliant with IEC 61754-13 & CECC 86 115-801 standards.

APPLICATIONS

Telecommunications market, where long single mode optical fiber cables can run upwards of 50km. In these

extreme situations the connector needs to have extremely low losses and accurate geometry.

CATV, LAN, MAN, WAN, Test & Measurement, Industry, Medical and Sensors.

SPECIFICATIONS


Coupling Type Screw thread fitting

2mm or 3mm Boot Color Black/Green

900μm Boot Color Black/Green

Shell Connector versions available for 2mm, 3mm Cable, 900μm Buffered Fiber





CN-MFC1 FC/PC Multimode Connector

CN-SFC1 FC/PC Single mode Connector

CN-SFC2 FC/UPC Single mode Connector

CN-SFC3 FC/APC Single mode Connector

CN-SFC4 FC/APC 8º Single mode Connector


Fiber Connector

LC CONNECTOR

LC connector was the first small form factor connector on the

market. The use of a high performance 1.25mm ferrule gives the

connector extremely high performance characteristics.

LC connector is comprised of a Polymer body and a Ceramic

ferrule/spring/crimp barrel assembly plus a crimp over sleeve

and rubber boot. This connector is suitable for 900μm, 2 and

3mm cable. The connector is precision made and manufactured

to demanding specifications. The combination of a Ceramic

ferrule with polymer housing provides consistent long-term


The LC has been designed to meet the need for a small optical

fiber connector that uses half the space of the SC connector. It

features a latched lever mechanism to provide secure ma-ting

into the adaptor. The duplex version which is two simplex

connectors with a clip, plugs into an adaptor with the same

footprint as the SC connector.

COMPLIANCE


APPLICATIONS

It can be seen in extensively in the local area network closet as a standard fit to many market leading hubs and

switches. High-density connections, SFP transceivers, XFP transceivers.

SPECIFICATIONS


Shell Color Blue (SM/PC), Green(SM/APC), Beige (MM)

2mm or 3mm Boot Color White/Green

900μm Boot Color White/Green

Shell Connector versions available for 2mm Cable, 900μm Buffered Fiber, Simplex & Duplex



Coupling Type Snap



CN-MLC1 LC/PC Multimode Connector

CN-SLC1 LC/PC Single mode Connector

CN-SLC2 LC/UPC Single mode Connector

CN-SLC3 LC/APC Single mode Connector

CN-SLC4 LC/APC 8º Single mode Connector


Fiber Connector

MTRJ CONNECTOR

MTRJ connector is capable of terminating any 125μm fiber,

designed to terminate two fibers within a single connector,

reduces the risk of operator error when inter-connecting

equipment and distribution panels. The MT ferrule in its various

designs has the ability to connect anything from 2 fibers in the

MTRJ to 72 fibers in the latest versions of the MPO connector.

The flexibility of the connector allows it to be used in short run

local area networks as well as longer haul cabling using single

mode fiber. The high density MT-RJ connector allows the

termination of high fiber count backbone cables to be terminated

in smaller distribution panels.

COMPLIANCE


APPLICATIONS

Telecoms, intra-building backbone LAN cross connects. (Duplex multimode connections).

SPECIFICATIONS

Fiber Type 9/125 SM, 62.5/125 MM, 50/125 MM

Polishing PC, UPC, APC

Ferrule Diameter 2.45×4.4 mm

Coupling Type Snap

Dimension (HxWxL) 10x9.2x56 mm (with Boot)



CN-MMT1 MTRJ/PC Multimode Connector

CN-SMT1 MTRJ/PC Single mode Connector

CN-SMT2 MTRJ/UPC Single mode Connector

CN-SMT3 MTRJ/APC Single mode Connector

CN-SMT4 MTRJ/APC 8º Single mode Connector


Fiber Connector

E2000 CONNECTOR

E2000 features a latch lever locking mechanism to prevent

accidental disconnection. It is designed to work in today’s

telecommunications markets where use of high power lasers

require a high level of safety and performance. The E2000 With

the power of today’s laser transmitters reaching levels that are a

danger to an unprotected user, the E2000 offers a level of

protection no other connector can match. Each E2000 connector

and adaptor has its own shutter that automatically opens and

closes as the connector slides into its adaptor. Designed to be

easy to terminate, the once piece ferrule assembly saves time

and gives trouble free operation.

COMPLIANCE


APPLICATIONS

Telecommunications markets where use of high power lasers require a high level of safety and performance.

DWDM systems.

SPECIFICATIONS

Tuning In 60° Steps

Mechanical Resistance 100N tensile load

Color Blue (SM), Green (SM APC), Beige (MM)

Coupling Type Snap, with light and dust-cap



CN-ME21 E2000/PC Multimode Connector

CN-SE21 E2000/PC Single mode Connector

CN-SE22 E2000/UPC Single mode Connector

CN-SE23 E2000/APC Single mode Connector

CN-SE24 E2000/APC 8º Single mode Connector


Fiber Adaptor

Fiber Adaptor Specification

Fiber adaptors are available for all standard connector types in both single mode and multimode including Simplex

and duplex versions. Single mode adaptors are available with either Zirconia or phosphor bronze sleeves. Zirconia

sleeves provide tighter tolerances, generally required for angled physical contact (APC) connectors. Multimode

adaptors are available with phosphor Bronze sleeves, which provide good performance for spherical polished

connectors. The adaptor sleeve aligns the ferrules and holds them in place. The adaptors are color coded allowing

easy identification of the adaptor type.

Hybrid fiber optic adaptors are also available which are used to link different kinds of fiber optic connectors. Hybrid

Adaptor specifications and functions are same as standard fiber optic adaptors.

ENVIRONMENTAL & MECHANICAL DATA


Storage Temperature: -40 to +85º C

Temperature Cycling (61300-2-18) -40 to +75º C, 40 cycles=0.2dB change

High temperature (61300-2-18) 70˚c for 96Hrs, <0.4dB change

Damp Heat (61300-2-19) 40º C at 93%RH for 96 Hrs, <0.4dB change

Vibration-Mated Pair (61300-2-1) 10-55Hz, 1.5mm P to P <0.2dB change

Mating Durability (61300-2-2) 500 Mating Cycles, clean every 25, <0.2dB change


Item

Single mode Multimode

PC UPC APC 62.5/125 50/125 50/125

10G

Insert Loss/connector (single Fiber) 0.2dB Max. (0.15dB typ.) 0.3dB Max. (0.25dB typ.)





Fiber Adaptor

SC FIBER OPTIC ADAPTOR

SC Fiber Optic Adaptors are various types including single mode

and multimode, Zirconia sleeve and Bronze sleeve, Simplex and

Duplex versions. Standard female to female SC Fiber optic

adaptor and hybrid SC Fiber optic adaptors are available.

STANDARD COMPLIANCE

TIA/EIA-568-C.3, TIA/EIA-604 FOCIS-3

APPLICATIONS

Telecommunication networks, Local Area Networks (LANs)

Metro networks, Data processing networks

Industrial, military and medical, CATV

DESIGN & MATERIALS

Adaptor material High Impart flame retardant thermo plastic UL94-V0

Split Sleeve Material Phosphor Bronze or Zirconia ceramic (for Single mode

applications)

Spring Plate Stainless steel

Capillary diameter tolerance (Single Mode) 126 ± 0.5μm

Capillary diameter tolerance (Multimode) 127± 0.5μm



Mating durability >500 Mating Cycles



AD-SSCSC SC Single mode Simplex Adaptor

AD-MSCSC SC Multimode Simplex Adaptor

AD-SSCSC SC Single mode Duplex Adaptor

AD-MSCSC SC Multimode Duplex Adaptor

SC – ST HYBRID FIBER OPTIC ADAPTOR

SC to ST hybrid fiber optic adaptors are with plastic or metal

(Zinc alloy nickel plated) housing, flange type, with Zirconia

sleeve for single mode and bronze sleeve for multimode. Blue

for single mode PC and beige for multimode PC.



AD-SSCST SC - ST Single mode Simplex Adaptor

AD-MSCST SC - ST Multimode Simplex Adaptor


Fiber Adaptor

ST FIBER OPTIC ADAPTOR

ST fiber optic adaptors are all threaded type, with metal housing,

single mode ones are with Zirconia sleeve and multimode ones

are with Bronze sleeve. ST fiber optic adaptors are simplex

adaptors.

APPLICATIONS

Telecommunication

CATV

LAN & WAN

Network

Broadband FTTP

DESIGN & MATERIALS

Adaptor material Zinc Alloy with nickel plating


applications)








AD-SSTST ST Single mode Simplex Adaptor

AD-MSTST ST Multimode Simplex Adaptor

ST - FC HYBRID FIBER OPTIC ADAPTOR

ST to FC hybrid fiber optic adaptors are also flange type with

Zinc alloy Nickel plated housing, colors and sleeves same as SC

to ST adaptors.

APPLICATIONS

Telecommunication

CATV

LAN & WAN



AD-SSTFC ST - FC Single mode Simplex Adaptor

AD-MSTFC ST - FC Multimode Simplex Adaptor


Fiber Adaptor

FC FIBER OPTIC ADAPTOR

There are three kinds of FC fiber optic adaptors, square type,

single D type and double D type, all FC fiber optic adaptors are

with metal housing, single mode FC Fiber optic adaptors are

with Zirconia sleeves, multi mode FC fiber optic adaptors are

with Bronze sleeves. All FC fiber optic adaptors are simplex.

APPLICATIONS

Telecommunication

CATV

LAN & WAN

Network

Broadband

FTTP

DESIGN & MATERIALS

Adaptor material Zinc Alloy with nickel plating


applications)








AD-SFCFC FC Single mode Simplex Adaptor

AD-MFCFC FC Multimode Simplex Adaptor

FC – SC HYBRID FIBER OPTIC ADAPTOR

FC to SC hybrid fiber optic adaptors are available with both

plastic housing type and metal housing type (Zinc alloy with

Nickel plating), plastic body adaptors are flange type and metal

housing adaptors are square type.



AD-SSCFC SC - FC Single mode Simplex Adaptor

AD-MSCFC SC - FC Multimode Simplex Adaptor


Fiber Adaptor

LC FIBER OPTIC ADAPTOR

LC fiber optic adaptors are all plastic housing; there are simplex

LC adaptors and duplex LC adaptors, usually duplex LC fiber

adaptors are with SC footprint. The LC fiber adaptors colors are

same as SC fiber optic adaptors: blue for single mode PC, beige

for multi mode PC and green for single mode APC. LC fiber optic

adaptors are with bronze sleeve for multimode and Zirconia

sleeve for single mode.

APPLICATIONS

CATV

Active device/Transceiver, Telecommunication networks

Multimedia Data processing networks

Test equipment, Premise installations

Gigabit Ethernet

DESIGN & MATERIALS

Adaptor material High Impart flame retardant thermoplastic UL94-V0


applications)








AD-SLCLC LC Single mode Simplex Adaptor

AD-MLCLC LC Multimode Simplex Adaptor

AD-SLCLC LC Single mode Duplex Adaptor

AD-MLCLC LC Multimode Duplex Adaptor

LC - SC HYBRID FIBER OPTIC ADAPTOR

LC to SC hybrid fiber optic adaptors are flanged type with metal

housing, both single mode and multi mode adaptors are with

Zirconia sleeves.



AD-SSCLC SC - LC Single mode Simplex Adaptor

AD-MSCLC SC - LC Multimode Simplex Adaptor


Fiber Adaptor

LC - ST HYBRID FIBER OPTIC ADAPTOR

LC to ST hybrid fiber optic adaptors are flanged type with metal


Zirconia sleeves.



AD-SSTLC ST - LC Single mode Simplex Adaptor

AD-MSTLC ST - LC Multimode Simplex Adaptor

LC - FC HYBRID FIBER OPTIC ADAPTOR

LC to FC hybrid fiber optic adaptors are flanged type with metal


Zirconia sleeves.



AD-SFCLC FC - LC Single mode Simplex Adaptor

AD-MFCLC FC - LC Multimode Simplex Adaptor

MTRJ FIBER OPTIC ADAPTOR

MTRJ fiber optic adaptors are with polymer housing,

there are two types available, one is flange type;

another is SC footprint type, both Simplex. MT-RJ fiber

optic adaptors are black color.

APPLICATIONS

Telecommunication , CATV

Subscriber loop , FTTH

LAN , Test equipment

DESIGN & MATERIALS







AD-SMMT MTRJ Single mode Simplex Adaptor

AD-MMMT MTRJ Multimode Simplex Adaptor


Fiber Adaptor

E2000 FIBER OPTIC ADAPTOR

Typical E2000 fiber optic adaptors are available by

single mode PC and single mode APC, they are

simplex fiber optic adaptors, SC patch panel mount

type.

APPLICATIONS

Telecommunication

CATV

Subscriber loop

FTTH

LAN

Test equipment

DESIGN & MATERIALS



applications)

Polish PC,UPC,APC




Storage Temperature -40 to +85º C




AD-SE2E2 E2000 Single mode Simplex Adaptor

AD-ME2E2 E2000 Multimode Simplex Adaptor


Fiber Attenuator

Fiber Optic Attenuator Specification Fiber Optic Attenuator is a passive device used to reduce the amplitude of a light signal without significantly

changing the wave form itself. This is often a requirement in Dense Wave Division Multiplexing(DWDM) and Erbium

Doped Fiber Amplifier(EDFA) applications where the receiver cannot accept the signal generated from a high-power

light source.

Attenuator feature a proprietary type of metal-ion doped fiber which reduces the light signal as it passes through.

This method of attenuation allows for higher performance than fiber splices or fiber offsets or fiber clearance, which

function by misdirecting rather than absorbing the light signal. HNK attenuator are capable of performing in the

1310nm and 1550nm.

HNK attenuator are capable of withstanding over 1W of high power light exposure for extended periods of time,

making them well-suited to EDFA and other high-power applications. Low Polarization Dependent Loss(PDL) and a

stable and independent wavelength distribution makes them ideal for DWDM.

Complied with or exceeds Standard

Telcorida GR-326-CORE（ferrule end face quality compliant）

Telecordia GR-910-CORE

EC 60874-7, F01(JIS C5970) TIA/EIA-604-4A

TIA/EIA-568B-B.3 Fiber Optic Cabling Components Standard

EEE802.3z Standards for Fiber Optic Cabling

RoHS Approved for European Market Requirements

Features

Precise attenuation level（with 1dB,2dB,3dB... to 30dB, typical 5dB, 10dB 15dB）

Inline design is easy to use (plugs between existing fiber jumper & equipment)

Portable, Easy installation, Readily panel mountable

High Quality Return loss 60db or Greater

Custom designed specifications

Dual wavelength (1310nm/1550nm)

Attenuators marked with attenuation level

Applications

Fiber optic sensors

Testing instruments

Fiber to the home

Multi-Channel subscriber loop

Optical transmission system

Telecommunication Network

CATV Network

Data communication

Instrumentation

Local Area Network


Fiber Attenuator

Specifications

Characteristics Unit Conditions Values

Attenuation dB UPC 1 ~ 30

APC 1 ~ 20

Return Loss dB UPC ≥50

APC ≥60

Operating Wavelength nm - 1310 and 1550, 1240 -

1600

Attenuation Accuracy - 1 ~ 4dB <0.5dB

5 ~ 30dB <10%

Operating Temperature °C - -40 ~ +75

Storage Temperature °C - -40 ~ +85

Polarization Dependent Loss dB - <0.2

Relative Humidity % 75°C 95

Vibration dB 10 ~ 55, 2Hrs ∆IL<0.2

Impact dB 1.5m, 5 drops ∆IL<0.2

SC Fiber Optic Attenuator

Female to male SC fiber optic attenuator and bulkhead

SC fiber optic attenuator are available. They fit typical

1310nm and 1550nm single mode fiber applications.

Attenuation range is from 1dB to 20dB. We supply both

SC UPC fiber optic attenuator and SC APC fiber optic

attenuator. The SC fiber attenuators are with SC

connector interface. They are with premium ceramic

sleeves. Plug type SC fiber attenuator is a female to

male type, while bulkhead SC fiber attenuator is a

female to female type. The SC fiber optic attenuators

operation wavelength range is 1240nm to 1620nm.

FC Fiber Optic Attenuator

FC APC single mode fiber optic attenuator and FC UPC

single mode fiber optic attenuator are available, both of

them are with ceramic sleeves and accurate FC

connection interface. The attenuation range is from

1dB to 30dB available. The FC fiber attenuator features

high power endurance and low back reflection. They

are used to reduce the optical power in the fiber optic

links.


Fiber Attenuator

LC fiber optic Attenuator

Single mode LC fiber optic attenuators including the

bulkhead LC attenuator and female to male LC fiber

attenuator are available. They are with high quality

ceramic sleeves and UPC polishes. Attenuation range

available is from 1dB to 30dB. Working range of the LC

fiber attenuator is 1240nm to 1620nm, including the

typical 1310nm and 1550nm single mode applications.

ST fiber optic Attenuator

The ST fiber optic attenuators are metallic body and

ceramic sleeves. ST Female to Female Bulkhead

Adapter Attenuators utilize a wavelength sensitive

neutral density filter to achieve attenuation. Bulkhead

type attenuators can be inserted easily between

jumpers or permanently mounted in a fiber distribution

cabinet. They can be used for either MM or SM. The

attenuators use a filter to induce attenuation and are

wavelength dependent.

MU Fiber Optic Attenuator

Both UPC MU fiber optic attenuator and APC MU fiber

optic attenuators for single mode applications are

available. Their attenuation level ranges from 1dB to

30dB. This MU fiber attenuator can work at 1240nm to

1620nm range, including the typical SMF 1310nm and

SMF1550nm. Our MU fiber optic attenuators feature

the high return loss, high power light source durability

and wavelength independence.


Fiber Patch Cord

Fiber Patch Cord Specification They comprise two tight buffer fibers housed within a common outer

jacket in OM1, OM2, OM3, OM4, G652D ，G657A multi-mode and

single mode variants. Both ends are terminated with a high

performance hybrid or single type connector comprising of a SC, ST,

FC, LC, MTRJ, E2000 connector in simplex and duplex. These are

typically not ruggedized, depending on the application and a spring

loaded electrical contact housed within LSHF plastic shell possible,

making them suitable for internal use.

COMPLIANCE

Telcordia (formerly Bellcore) GR-326-CORE Generic requirements for Single

mode optical connectors and Jumper assemblies.

IEC 874-1 Generic specification for fiber optic connectors and cables

ANSI/TIA-568-C.3, ISO/IEC 11801 2nd Ed., CENELEC EN 50173, UL94V-0

Cable flame resistant rate: OFNR or IEC60332-3 standard

KEY FEATURES

ST, SC, FC, LC, MT-RJ, E2000 connectors

Duplex and Simplex versions, uniform and hybrid cord versions

Position A/Position B markings

100% factory transmission tested per ANSI/TIA-568-C.3

Slim-profile boots with durable flexible cable strain relief

Available in 0.9mm, 1.6mm, 2.0mm, 3.0mm sizes

MECHANICAL, ENVIRONMENTAL & MATERIAL DATA

Range of Mode Single or Multimode

Cable Type Simplex or Duplex Zipcord

Connector Style SC, FC, ST, LC, MTRJ, E2000

Polish or Ferrule Interface Type PC, UPC, APC

Cable Diameter 0.9mm, 1.6mm, 2.0mm, 3.0mm

Lengths Standard & Custom Lengths

Strength Member Aramid Yarn

Outer Jacket PVC or LSZH

Cable Assembly Length (<15 meter Tolerance) -0/+100mm

Cable Assembly Length (>15 meter Tolerance) -0/+10%

Jacket Color (Multimode: OM1 & OM2) Orange

Jacket Color (Multimode: OM3 & OM4) Aqua

Jacket Color (Single Mode: G652D & Gb57A) Yellow

Durability 500 cycles(0.2 dB max increase), 1000

mate/demate cycles

Operating Temp. -20 ˚C to +70˚C/+85˚C (armoured)

Storage Temp. -40 ˚C to +85˚C

Ferrule Concentricity < 1μm, Other Ferrule Concentricity < 1μm

Humidity (FOTP-5) 90-95% at 40°C

Strength of Coupling Mechanism (FOTP-185) 33 N at 0° for 5 sec

Cable Retention (FOTP-6) 50 N at 0° for 5 sec.

Twist (FOTP-36) 15 N at 0° 5 turns, 10 cycles

Flex (FOTP-1) 0.5 Kg at 25 cm, +90° to -90°, 100 cycles


Fiber Patch Cord

OPTICAL CHARACTERISTICS

Fiber Type Max. Attenuation(dB/km)

Min.Overfill Launch Bandwidth (Mhz.km)

Min.Gigabit Ethernet Link Distance (m) Gigabit 10Gigabit

850nm 1300n

m 1310n

m 1550n

m 850nm 1300nm

850nm

1300nm

850nnm

OM1 62.5/125µm

≤2.7 ≤0.6 - - ≥200 ≥600 275 550 -

OM2 50/125µm ≤2.3 ≤0.6 - - ≥700 ≥500 750 600 150

OM3 50/125µm ≤2.3 ≤0.6 - - ≥1500 ≥500 100

0 600 300

OM4 50/125µm ≤2.3 ≤0.6 - - ≥3500 ≥500 1100 600 550

G652D 9/125µm

- - ≤0.32 ≤0.18 - - - - -

G657A 9/125µm

- - ≤0.35 ≤0.21 - - - - -


Item Single mode Multimode

PC UPC APC 62.5/125 50/125 50/125 10G

Insert Loss/connector (single

Fiber) 0.2dB Max. (0.15dB typ.) 0.3dB Max. (0.25dB typ.)




TERMINATION SPECIFICATIONS

GEOMETRIC SPECIFICATIONS

Radius of Curvature 7-25 mm

Apex Offset 0-50 um

Radial Fiber Height -50 to +50 nm

Angular Offset <0.3 degrees

Fiber Roughness 0-25 nm

Ferrule Roughness 0-50 nm

END FACE DEFECTS

Fiber Core 0 nm²

Mode field diameter 0 nm²

Ferrule contact zone 0 nm²

Testing & Inspection 100%

EPOXY

Temperature Coeff.Tg 120

Curing Method Out Gassed

Residual Epoxy No Visible Epoxy Ring

CONFIGURATION CONTROL

Serialization Each Cable is Serialized


Fiber Patch Cord

Armoured Fiber Patch Cord Specification

Armoured patch Cord provides flexible interconnection to active

equipment, passive optical devices and cross connects. These

patch cords are manufactured so as to withstand side pressure

and repeated bending and are used in outdoor applications in

customer premises, central offices and in harsh environments.

Armoured patch cords are constructed with a stainless steel tube

over a standard patch Cord surrounded by a stainless steel mesh

with and outer jacket. The flexible metal tube limits the bending

radius, preventing the optical fiber from breaking. This ensures a

safe and durable optical fiber network system.

FEATURES

Conform to IEC,EIA-TIA, and Telecordia performance

requirements

Together with custom connectors, the cable can be both water

proof and gas proof and can withstand high temperatures.

Layouts can be wired much the same way as ordinary electric

cable installations.

Anti rodent, save space, low cost construction

Improve stability ＆ security

Easy installation, Maintenance

Available in different fiber types

Available in standard and custom lengths

RoHS, REACH ＆ SvHC Compliant

APPLICATIONS

Military, Telecommunication Networks

Factory LAN systems

Intelligent optical fiber network in buildings, underground network systems

Transportation control systems

High technology medical applications

CCTV security systems. Broadcasting and cable TV network systems.

ITEM SIMPLEX DUPLEX DESCRIPTION

Fiber count 1 2

Tight Buffer OD 0.6mm ± 0.05mm OD 0.6mm ±0.05mm Blue/Yellow

Kevlar 2 * 1110 dtex * 2 2 * 1110 dtex * 2 Yellow

Outer Jacket OD 3.0 +/- 0.2 mm OD 3.3 +/- 0.1 mm PVC, LSZH

ARMOURED FLEXIBLE TUBE

Tube Material Stainless

Inner Diameter 1.5mm ± 0.2mm

Tensile Strength ≤ 147N

Min. Bend Radius ≥ 40 ± 5mm

Pressure Resistance ≤ 2450/50mm


Fiber Patch Cord

Drop Cable Patch Cord With the increasing popularity and promotion of FTTH

construction, Using g. 657 fiber core as the drop cable began

widely used in corridor, households environment.

Drop cable is a new type of entering fiber optic cable, for such

situation indoor and terminal installation, which will need cable

bending. Wiring can be cut according to the distance.

Drop cable patch cord, according to the way of indoor cable

processing connector. In one end or both end of drop cable

process connectors, compared to fast connector, with higher

optical stability and service life. In the present situation, fast

connector technology standard is differ, each manufacturer are of

variable quality, drop cable can satisfy FTTH engineer

requirement of line quality.


ITU-T G657A2 (B6)

ITU-T G. 650

YD/T 1113

GB 6995. 2

GB/T 8815

GR-326-CORE

TIA/EIA-568-C.3

ANSI/TIA/EIA-455B

RoHS Compliant Directive 2011/65/EU

Features

Special low-bend-sensitivity G657 fiber provides high

bandwidth and excellent communication transmission property.

Two parallel strength members ensure good performance of

crush resistance to protect the fibers.

Simple structure, light weight and high practicability.

Novel flute design, easily strip and splice, simplify the

installation and maintenance.

The strong steel passenger provided good tensile load during

aerial application.

Single steel wire or FRP as additional strength member

ensuring good performance of tensile strength.

Drop cable patch cord will be produced to different kind of

connectors and different length according to the construction

need.


Fiber Patch Cord

Fiber Parameters

ITEM Value

Fiber type G657A

Cladding Diameter 125±0.7 (µm)

Cladding non-circularity ≤0.7(%)

Core-cladding concentricity error ≤0.5 (µm)

Mode field Diameter @1310 8.4~9.2(µm)

Cladding -coating concentricity error ≤12.0up

Coating Diameter 245±0.5 (µm)

Attenuation(max.) 1310nm ≤0.4(dB/km)

1550nm ≤0.3(dB/km)

Bend Loss (dB)

Bend Radius 10 15

Bend Turns 1 10

1550nm ≤0.75 ≤0.25

1625nm ≤1.5 ≤1.0

Cable Parameters

ITEM SPECIFICATIONS

Fiber Type SM

Fiber count 1~2

Jacket

Diameter 2.0±0.1mm × 5.1±0.1mm

Material Standard: LSZH Option: PE or other

Color Black or White

Strength Member FRP or Single steel wire

Fiber Connector Parameter

Item Single mode

PC UPC APC

Insert Loss/connector (single Fiber) 0.3dB Max. (0.2dB typ.)

Return Loss ≥45 dB ≥50 dB ≥60 dB

Insert Loss/MTRJ Connector 0.5dB Max. (0.45dB typ.)

Allow inserted number > 2000 times

Operating temperature ≤0.2dB / -40˚C to +75˚C,

Mechanical and Environmental Characteristics

ITEMS UNITE

SPECIFICATIONS

GJYXCH/ GJYXFCH GJXFH/ GJXH

Tension Term(Long Term) N 300 40

Tension Term(Short Term) N 600 80

Crush Term(Long Term) N/100mm 1000 500

Crush Term(Short Term) N/100mm 2200 1000

Min. Bend Radius(Dynamic) mm 30D 20D

Min. Bend Radius(Static) mm 15D 10D


Fiber Patch Cord

HNK Fiber Optic Loopback patch cord Fiber Loopbacks is designed to provide a media of return patch for a fiber

optic signal; typically it is used for fiber optic testing applications or network

restorations. For the testing applications, the loopback signal is used for

diagnosing a problem. Sending a loopback test to network equipment, one at

a time, is a technique for isolating a problem.

Similar as fiber optic patch cords, fiber loopback can be with various jacket

types and cable diameters, and they can be with different terminations and

length. HNK makes the fiber optic loopbacks strictly according to industry

standard, each of the cable is functionally tested before shipping, and we

offer custom assemblies for fiber optic loopbacks such as custom connector

configurations and special polished.

Our fiber optic loopback products are two styles, one is the common type

which is with visible cable parts on the body, and the other is a loopback

module. The loopback plug is more compact and it has most of its parts

inside the shield body for protection. Both of these 2 types’ fiber optic

loopbacks are good optical performance and competitive prices. Optical fiber

used on the loopback can be 9/125 SMF, 50/125 MMF or 62.5/125 MMF.

Fiber optic loopbacks are with compact design, and they are compliant with

fast Ethernet, fiber channel, ATM and Gigabit Ethernet. we also offer custom

assemblies for fiber optic loopback. The common fiber optic loopbacks types

are: SC fiber optic loopback, LC fiber optic loopback, MT-RJ fiber optic

loopback.


GR-326-CORE UL-V0 flammability rating

RoHS Compliant Directive 2002/95/EC TIA/EIA-568-C.3

ANSI/TIA/EIA-455B IPC-8497-1

Features

Compact design

Compatible with Fast Ethernet, Fiber Channel, ATM and Gigabit Ethernet

Short wavelength devices

Custom assemblies available

Applications

Equipment interconnection Device pig-tailing

Premise networks Patch panel applications

Communications connections

Specification

ITEM Value

Insertion Loss ≤0.2dB (MTRJ:≤0.5dB, MPO/APC:≤0.7dB, MPO/PC:≤0.5dB)

Return Loss Singlemode UPC≥50dB, Singlemode APC≥60dB, Multimode PC≥35dB

Optical Fiber G652D,G657A,OM1,OM2,OM3,OM4 Available.

Cable Jacket OFNR, LSZH

Exchangeability ≤ 0.2 (500 cycle passed)

Temperature Range - 40 to + 80℃

Tensile Strength 10kgf


Fiber Pigtail

Fiber Pigtail Specification

Fiber pigtails are used in permanent connections between patch

panels and incoming cables / single blown fibers.

Pigtails are pre-constructed with connectors. Connector options

include small form factors such as LC, E2000 and MT-RJ as well as

SC, FC and ST. These are based on 900μm tight buffer cores (600μm

MT-RJ) and suitable for internal use only inside suitable Fiber

Management Systems.

COMPLIANCE

ISO/IEC 11801

EN50173 -1,ANSI TIA/EIA 568B

MECHANICAL DATA

Crush (N) 800

Impact (Nm) 0.2

Operating Temperature -10°c to +70°c

Installation temperature 0°c to +70°c

Temp - Installation 0°c to +70°c

Bend Radius 50mm (min)

OPTICAL CHARACTERISTICS (FIBER)

Fiber Type

Max. Attenuation(dB/km) Min.Overfill Launch Bandwidth(Mhz.km)

Min.Gigabit Ethernet Link Distance(m)

Gigabit 10Gigabit

850nm 1300n

m 1310n

m 1550n

m 850nm 1300nm

850nm

1300nm

850nnm

OM1 62.5/125µm

≤2.7 ≤0.6 - - ≥200 ≥600 275

550 -

OM2 50/125µm ≤2.3 ≤0.6 - - ≥700 ≥500 750

600 150

OM3 50/125µm ≤2.3 ≤0.6 - - ≥1500 ≥500 1000

600 300

OM4 50/125µm ≤2.3 ≤0.6 - - ≥3500 ≥500 1100

600 550

G652D 9/125µm

- - ≤0.32 ≤0.18 - - - - -

G657A 9/125µm

- - ≤0.35 ≤0.21 - - - - -

OPTICAL PERFORMANCE DATA (CONNECTOR)

ST

PC/UPC/APC

SC

PC/UPC/APC

FC

PC/UPC/APC MT RJ

LC

(MM/SM)

Insertion Loss (dB)

Max. ≤0.3 ≤0.3 ≤0.3 ≤0.6 ≤0.3/0.2

Insertion Loss (dB)

Typical. ≤0.2 ≤0.2 ≤0.2 ≤0.3 ≤0.2/0.1

Return Loss SM(dB) 20.0 20.0 20.0 20.0 20.0

Return Loss MM(dB) ≥45/≥50/≥60 ≥45/≥50/≥60 ≥45/≥50/≥60 ≥45 ≥45


Fiber Pigtail

Fiber Optic Waterproof Pigtail Waterproof Fiber Optic Pigtail, which uses single-core cable as the

basic component, is a special indoor cable. Optical waterproof cable

pigtail is twisted around the non-metallic central strength member in

clockwise direction, water-block yarns outside, steel or aluminum tape

used as armored layer, and proper material jacket. The waterproof

fiber optic cables are with strong PE jacket and armored structure,

they can resist high temperature and suit to use in harsh environment.

This kind of cable is usually used as pigtails in interconnect line of

equipment, and used as interconnect lines in different buildings.

We produce the fiber optic waterproof pigtails strictly according to IEC

and EIA/TIA standards, the products feature low insertion loss, high

return loss, good interchangeability and repeat push-pull performance,

which make them easy to use.

Features:

2, 4, 6, 8 and 12 cores are available.

Single mode or Multimode optional.

Various kinds of connect interfaces optional such as LC, SC, FC, ST, MTRJ, MU, E2000, etc.

Good mechanical and environmental characteristics.

Waterproof wrapped excellent performance suit for outdoor and harsh environment.

Flame retardant, meet the requirement of relevant standards.

Easy to splice and convenient laying.

Low insertion loss, high return loss, excellent exchangeability, high stability.

Application:

Optic-fiber CATV LAN access net

Data & Communication System Connection for main fiber and optical receiver

Specifications:

Item Description

Fiber Type SM Fiber : G652D,G657A.

MM fiber : OM1,OM2,OM3 and OM4. or another types of fiber

Jacket Material PE (Polyethyene), or other contracted material

Fiber Count (core) 2 4 6 8 10 12

Outer Diameter (mm) 8.7 8.7 10 11.7 13.3 15

Cable Weight (kg.km) 54 60 81 108 134 183

Fiber Color 12 different colors according to the chromatogram

Max. Tension (N) Short Term 400 400 600 800 1000 1200

Long Term 200 200 300 400 500 600

Max. Crushing

Resistance (N/100)

Short Term 1000

Long Term 500

Min. Bend Radius

(mm)

Dynamic 20D (D is the outer diameter of the cable)

Static 10D

Temperature (°C) Storage -20 ~ 60

Temperature -20 ~ 60

Note:

1. The cable dimensions and weight are in accordance with the tight buffer fiber of 2.0mm outer diameter

2. The Min. Bend radius (static) is 5D when G.657 fiber is used

3. Fiber Cable customize available


Fiber Pigtail

Ribbon fan-out pigtails Ribbon fan-out pigtails are made of ribbon fiber optic cables. It is

generally installed in closet area or horizontal patch extension from

consolidation point to the workstation outlets. Ribbonized fibers are

primary coated fibers placed next to each other in one plane. An

acrylate coating or polyester tape keeps the fibers together. The fiber

is flat type. Most common are 4-, 8- and 12-fiber ribbon cable. Ribbon

pigtails use a special device to protect the separated optic fibers(for

example 12 cores),through connectors to accomplish links with other

cables.

Ribbon fan-out pigtails generally have two types：jacket ribbon fan-out

pigtails and bare ribbon fan-out pigtails. Jacket ribbon fan-out pigtails

have outer jacket on fiber ribbon. Bare ribbon fan-out pigtails have no

outer jacket and generally protected by transparent tube.


ITU-T G652.D

ITU-T G657.A

ITU-T G651.1 OM1 OM2 OM3 OM4

IEC60793-2-10 type A1a.1/A1b OM1/OM2

IEC60793-2-10 type A1a.2 OM3

IEC60793-2-10 type A1a.3 OM4

ISO/IEC 11801 , ISO/IEC 24702

IEEE 802.3z Gigabit Ethernet

ANSI/TIA/EIA 568C.3

ANSI/TIA/EIA-455B

ROHS Compliant Directive 2011/65/EU(ROHS2.0)

Features

Top quality ceramic ferrule

Top quality fiber cable

Low insertion loss and high return loss

UPC, APC or PC polish

With a fan out kit at the junction of fibers

The fiber is flat type.

Good exchangeability

Good durability

GR-326-Core, UL94V-O, TIA/EIA-568-B.3, RoHS

Cable structure

The ribbon cable is flat.

The jacket ribbon fiber cable includes: fiber ribbon, aramid yarn and outer jacket.

Bare ribbon fiber cable has no outer jacket.

Drawing:


Fiber Pigtail

Fan-out kit type

According to fiber counts and fan-out tubing, there are several different types of fan-out kit.

Fan-out tubing diameter can be 0.9mm or 2.0mm.

Specification

ITEM Value

Fiber Type OS2, OM1, OM2, OM3, OM4

Fiber Count 2,4,6,8,12

Cable Type Bare ribbon, Jacket ribbon

Fanout tubing diameter 0.9mm,2.0mm

Connector SC, LC, ST, FC, MU, MTRJ, E2000, DIN, D4, SMA905

Jacket Type OFNR (Normal), OFNP, LSZH

Insertion Loss <=0.2dB

Return Loss* UPC>=50dB, APC>=60dB, PC>=35dB

Repeatability (dB) <=0.2 (1000 times)

Exchangeability (dB) <=0.2

Operating temperature -40 ° C ~ 85 ° C

Storage temperature -40 ° C ~ 85 ° C

*UPC≥55dB, APC≥65dB on request.

All connectors are inspected visually at 400X


Fiber Pigtail

Bundle fan-out pigtail (distribution fiber optic cable) Bundle fan-out pigtails are made of multi core round bundle fiber optic

cable, which is also called distribution fiber optic cable. It is generally

installed in closet area like rack mount or wall mount splice boxes or

patch panels.

Bundle fan-out pigtail is an amount (2 -12 fibers) of 900 μm pigtails

bundled in an outer jacket with kevlar and can be pre-connectorized or

non pre-connectorized. Bundle fan-out Pigtail has the great advantage

of giving less congestion than 12 individual pigtails with outer jacket and

kevlar. Interfacility cable is routed on the splice unit, whether it is

pre-connectorized or not. In case one connector fails or a fiber breaks,

the complete Bundle Pigtail should not be replaced since the splice

holder can be used to splice a new pigtail to the broken fiber.

Fiber optic distribution patch cord contains individual 900 μm fibers with

kevlar and outer jacket (up to 2.0 mm) and a strength member which

are bundled in an outer jacket. These cables are constructed very high

fiber count up to 144 fibers.

Bundle fan out pigtails are a custom design product; cable length,

jacket types and connectors are with many options. To easily identify

the multiple fiber cables, 0.9mm cable itself are made with different

colors, if 2mm cable it will be put number label to identify.

HNK provides a wide range of high quality high fiber count Bundle fan

out patch cord assemblies with various types of Fiber Connectors

including ST, FC, SC, LC, MU, E2000 ...etc.,. , and are available in

multimode and single-mode fibers with a variety of Fiber Patch

cords. All of the Bundle fan out patch cord assemblies are composed of

our top quality Ceramic Ferrules and Fiber Connector Housings

ensuring a stable performance at a high quality level.


ITU-T G652.D

ITU-T G657.A

ITU-T G651.1 OM1 OM2 OM3 OM4

IEC60793-2-10 type A1a.1/A1b OM1/OM2

IEC60793-2-10 type A1a.2 OM3

IEC60793-2-10 type A1a.3 OM4

ISO/IEC 11801 , ISO/IEC 24702

IEEE 802.3z Gigabit Ethernet

ANSI/TIA/EIA 568C.3

ROHS Compliant Directive 2011/65/EU(ROHS2.0)

Features

Top quality ceramic ferrule

Top quality fiber cable

Low insertion loss and high return loss

UPC, APC or PC polish

Good exchangeability

Good durability

GR-326-Core, UL94V-O, TIA/EIA-568-B.3, RoHS


Fiber Pigtail

Cable structure

The bunch cable, also called distribution cable, is round.

It includes: tight buffer fiber, aramid yarn and outer jacket.

A heat shrink tube is generally used.

The bunch fan-out pigtails include: bunch cable, heat shrink tube, fan-out tubing and connectors.

Fan-out tubing diameter can be 0.9mm or 2.0mm.

Specification

ITEM Value

Fiber Type OS2, OM1, OM2, OM3, OM4

Fiber Count 2,4,6,8,12,24,48,72,144

Cable Type Bundle cable(or distribution cable)

Fan-out tubing diameter 0.9mm,2.0mm

Connector SC, LC, ST, FC, MU, MTRJ, E2000, DIN, D4, SMA905

Jacket Type OFNR (Normal), OFNP, LSZH

Insertion Loss <=0.2dB

Return Loss* UPC>=50dB, APC>=60dB, PC>=35dB

Repeatability (dB) <=0.2 (1000 times)

Exchangeability (dB) <=0.2

Operating temperature -40 ° C ~ 85 ° C

Storage temperature -40 ° C ~ 85 ° C

*UPC≥55dB, APC≥65dB on request.

All connectors are inspected visually at 400X


Fiber Patch Cord

MPO Patch Cord Cable Assemblies

Features

High Performance in Insertion Loss & Return Loss

4,8,12 and 24 fiber connector terminations and assemblies

Designed for low loss and standard loss SM and MM

applications

Economical solution for mass-termination of fiber

Suitable for MPO/MTP application

Ruggedized round cable, oval cable and bare ribbon options

available

Color coded housings available to differentiate fiber type,

polish type and/or connector grade

COMPLIANCE

IEC 61754-7& JIS C5982

Structured cabling per TIA-568-C

Parallel Optics

- Optical Internetworking Forum (OIF) Compliant

- Infiniband Compliant

Infiniband

- 10G Fiber Channel Compliant

- 40G and 100G IEEE 802.3

- QSFP

Applications：

Optical switching inter-frame connections

High fiber density card edge access

Array trunk cables

Datacenter cabling

Specifications

Fiber Type Single mode (APC Polish) Multimode (PC/ Flat Polish)

Parameter Standard Low Loss Standard Low Loss

Insertion Loss Maximum <0.7dB <0.35dB <0.7dB <0.35dB

Return Loss >60dB None

Durability >500 Mating Cycles

Operating Temperature -40°C to 80 °C

Test Wavelength 1310nm 850nm


Fiber Patch Cord

Assembly Structure Illustration


Fiber Patch Cord

MPO Harness & Fan out Cable Assemblies

Features


Available in 8,12 and 24 fiber

Precise dimension

100% in-house tested

Customized furcation length to cater for different installation

situations

Single-fiber connector interface available in SC, ST, LC,

E2000, MTRJ, in forms of Simplex or Duplex

The choice of the supports higher speed Ethernet and Fiber

Channel applications (OM3, OM4 and OS1/OS2 fibers), and

applications with legacy multimode fiber (OM1 or OM2)

Applications：

Data Centre Infrastructure

Storage Area Network-Fiber Channel

Emerging 40 & 100Gps Protocols

Specifications

MPO CONNECTOR








GENERIC CONNECTOR

Fiber Type Single mode Multimode

Parameter UPC APC PC

Insertion Loss Maximum <0.30dB

Return Loss >55dB >60dB >25dB





Fiber Patch Cord



Fiber Patch Cord

MPO Hydra Cable Assemblies

Features


Available in 8,12 fiber

Precise dimension

100% in-house tested

Customized furcation length to cater for different installation

situations

The choice of the supports higher speed Ethernet and Fiber

Channel applications (OM3, OM4 and OS1/OS2 fibers), and

applications with legacy multimode fiber (OM1 or OM2)

MPO Male (with guide pins) assembled with 0.9mm cable to

single-fiber connectors

All types of single-fiber connector interface available for

choices (SC, LC, E2000, MTRJ, etc.)

Applications：

For installing inside MPO fiber cassette module

Specifications

MPO CONNECTOR








GENERIC CONNECTOR

Fiber Type Single mode Multimode

Parameter UPC APC PC

Insertion Loss Maximum <0.30dB

Return Loss >55dB >60dB >25dB





Fiber Patch Cord



Fiber Optic Splitter


Optical splitter is suitable for a fiber optic signal to be

decomposed into multi-channel optical signal output. There are

two types optical splitters. One is fused biconic taper splitter

(FBT Splitter) made by the traditional optical passive device

manufacturers using the traditional biconic taper coupler

technology. The other one is planar optical waveguide splitter

(PLC Splitter) based on optical integration technology. Both

devices have their own advantages. Depending on the

occasion and demand, users can choose different Optical

splitter types.

Comparison of PLC Splitter & FBT Splitter

Parameters PLC Splitter FBT Coupler

Splitting Ratio 1:64 (1:128) 1:08

Wavelength Range (nm) 1260 ~ 1650nm 1310, 1490 or 1550 Single/dual/triple window

Splitting Ratio Equal division Equal or non-equal division

Dimensions Small Large size for multi channel

Wavelength Sensitivity Low High

Cost Low splitting channel, high price Price is lower for small channel splitter

Uniformity High Relatively Low(need monitoring)

TDL ±0.15dB ±0.45dB

1×8 PLC and FBT Testing Temperature -5 ~ +75 °C

Comparison of Single Mode Fiber & Multimode Fiber

Characteristic Single Mode Multi Mode

Bandwidth Virtually Unlimited Less than Virtually Unlimited

Signal Quality Excellent Over Long Distance Excellent over short Distance

Primary Attenuation Chromatic Dispersion Modal Dispersion

Fiber Types Step Index & Dispersion shifted Step & Graded Index

Typical Application Almost anything (including Ethernet) Analog Video; Ethernet; Short Range

Communications



PLC Splitters

Introduction

Planar Light wave Circuits (PLC) splitters are manufactured using silica glass waveguide circuits and extremely

precise alignment of optic fibers in very small package. They split or combine light from one or two incoming fibers to

multiple numbers of outgoing fibers.

They perform uniformly over a wide spectral range, with ultra-low losses. splitters are highly compact, reliable and

available in very wide range of fiber and connector types. All PLC splitters are fully compliant with the Telcordia

GR-1209 & GR-1221 standard.

Splitters contain no electronics and use no power. They are the network elements that put the passive in Passive

Optical Network and are available in a variety of split ratios, including 1:8, 1:16, 1:32,1:64,2:8, 2:16, 2:32 & 2:64.

Standard Compliance

• Telcordia GR-1221-CORE-1999 & GR-1209-CORE-2001

• TIA/EIA-568B.3 Fiber Optic Cabling Components Standard

• IEE802.3z Standards for Fiber Optic Cabling

• RoHS Certified for European Market Requirements

Features & Benefits

• Low insertion losses, High Uniformity, High Reliability, High directivity.

• Ultra-broadband performance (1250-1650nm)

• Low Polarization Dependant Loses (PDL) and Polarization Mode Dispersion (PMD)

• 1 or 2 input channels and up to 64 output channels

• Ultra small, easy installation, suitable for all applications

• Available with all type of packages and connectors

• Ready for use in uncontrolled environment

Applications:

• FTTx networks

• Optical CATV networks

• CWDM and DWDM systems

• Key element of all PON networks

• LAN and Telecom networks

Specifications:

Telcordia 1209 & 1221 Test results: Name of the test Condition Duration

Temperature- Humidity aging 85°C and 85% RH 7 days

Vibration 10 - 55Hz, 1.52mm double amplitude, in three axes 1 hour

Component Impact Test Impact of 500g (mass<=0.125kg), 1ms , half sine pulse 2 impacts

Temperature Cycling Test -40°C to + 70°C , Ramp rate: 1°C /min, Dwell time >15min 10 cycles

Temperature- Humidity

cycling

-40°C to + 85°C , between 10°C and 23°C - 85% RH, at 85°C -20%RH,

between 23°C and 85°C - maintain a linear change in RH,

below 10°C - uncontrolled RH

14 days

Water Immersion 43 ± 2°C , PH 5.5 ± 0.5 7 days

Fiber Side Pull test 0.23 kg load, 90° angle , 2 directions 5 seconds

Fiber Side Pull test 0.45 Kg load for Single Input Fiber , 1.5 Kg load for

8 Fiber Ribbon Outputs

5 seconds



1 x N

Parameter Unit 1 x 2 1 x 4 1 x 8 1 x 16 1 x 32 1 x 64

Insertion Loss Max. dB 3.8 7.0 10.4 13.9 17.2 22.0

Channel Uniformity Max. dB 0.6 0.5 0.5 1.4 1.6 2.5

Polarization Dependent Loss Max. dB 0.2 0.3 0.3 0.3 0.3 0.3

Wavelength Dependent Loss Max. dB 0.3 0.3 0.3 0.3 0.3 0.3

Temperature Dependent Loss Max. dB 0.5 0.5 0.5 0.5 0.5 0.5

Connector Dependent Loss Max. dB 0.2 0.2 0.2 0.2 0.2 0.2

Operating Wavelength Min.-

Max.

nm 1250 ~ 1650

Return Loss Min. dB 55

Directivity Min. dB 55

Operating Temperature °C -40 ~ + 85

Storage Temperature °C -40 ~ + 85

Maximum Input Power Max. mW 500

Fiber Type - ITU G.652D or G.657A

Fiber Length Met

er

1.0 meter or customized

Connector Type - Customized (SC, SC/APC, LC, LC/APC)

Package Dimension

(L x W x H)

Bare Fiber

(250 μm)

mm 40x4x4 40x4x4 40x4x4 40x4x4 55x7x4 55x12x4

Integrated Package (900μm) mm 55x7x4 55x7x4 55x7x4 60x12x4 80x23x4.5 120x43x4.5

Cassette

mm

100x80x10 100x80x10 100x80x10 100x80x10 100x80x10 100x80x20

2 x N

Parameter Unit 2 x 2 2 x 4 2 x 8 2 x 16 2 x 32 2 x 64

Insertion Loss Max. dB 4.0 7.3 10.7 14 17.5 22.5

Channel Uniformity Max. dB 0.8 1.0 1.0 1.5 1.8 3.0

Polarization Dependent Loss Max. dB 0.2 0.3 0.3 0.3 0.3 0.4

Wavelength Dependent Loss Max. dB 0.3 0.3 0.3 0.3 0.3 0.3

Temperature Dependent Loss Max. dB 0.5 0.5 0.5 0.5 0.5 0.5

Connector Dependent Loss Max. dB 0.2 0.2 0.2 0.2 0.2 0.2

Operating Wavelength Min.-

Max.

nm 1250 ~ 1650

Return Loss Min. dB 55

Directivity Min. dB 55

Operating Temperature °C -40 ~ + 85

Storage Temperature °C -40 ~ + 85

Maximum Input Power Max. mW 500

Fiber Type - ITU G.652D or G.657A

Fiber Length Mete

r

1.0 meter or customized

Connector Type - Customized (SC, SC/APC, LC, LC/APC)

Package Dimension

(L x W x H)

Bare Fiber

(250 μm)

mm 50x4x4 50x4x4 50x4x4 55x7x4 55x7x4 65x12x4

Integrated

Package (900μm)

mm 65x7x4 65x7x4 65x7x4 75x12x4 80x23x4.5 120x43x4.5

Cassette mm 100x80x10 100x80x10 100x80x10 100x80x10 100x80x10 100x80x20



FBT Splitter At its most basic, the FBT splitter, short for fused biconic taper splitter, is a passive device that divides an input

optical signal into unequal portions, and then send out the divided signals to separate users. FBT technology has

become mature after developing for about 20 years. Cost effective and high quality splitter devices that enable high

performance solutions for Point to Multipoint networks. The FBT splitter is now much cheaper to manufacture, and

has been widely used in FTTx systems, MANs, WANs, CATV, and active devices.

Our FBT devices are highly stable for multiport optical signal splitting with low insertion loss. All devices are tested

according to industry standard test procedures. It is available in 1×2, 1×3, 1×4, and 2×2 types. This fiber optic splitter

can be customized to suit different applications. To meet our customers’ needs, we are able to offer all types of

pre-connectorized solutions (SC/APC ,SC/UPC ...)

Features and Benefits

• This type of FBT splitter is built to the Telcordia GR-1209-CORE and Telcordia GR-1221-CORE standards. It is

interchangeable with many other optical fiber.

• Compact package, Convenient for small application areas.

• Compact management in closures and/or splice trays, Usable in various type and size applications anywhere in the

network.

• High reliability, Stable optical character, Consistent functional transmission.

• Low insertion loss, Low polarization dependent loss, High return loss, Wide operating temperature and wavelength.

• Meet the IEC and RoHS requirements.

Applications

• CATV

• Active devices

• Optical fiber communication system

• LANs, WANs

• Telecommunication network

• EPON/GPON

• FTTx

Specifications:

Specifications of the Single Mode FBT Splitter

Parameter P grade A grade Unit

Port Type 1x2 or 2x2 /

Operating Wavelength 1310 ± 40 & 1550 ± 40 nm

Maximum Insertion Loss 3.5 3.7 dB

Return Loss ≥55 dB

Additional Loss ≤0.15 ≤0.20 dB

Return Loss Uniformity 0.4 0.7 dB

Polarization Dependent Loss ≤0.10 ≤0.15 dB

Directivity ≥55 dB

Fiber Type Corning SMF-28e /

Operating Temperature -40~+85 °C

Storage Temperature -40~+85 °C

Fiber Type Bare fiber 0.9mm loose tube 2.0 or 3.0mm loose tube mm

Package Type Type one Type two /


Fiber Optic Splitter Single Mode Double Window Splitter (1310/1550nm)

Split Ratio Insertion loss (dB) P grade Insertion loss (dB) A grade Unit

50/50 3.5 3.7 dB

45/55 3.9/2.9 4.2/3.1 dB

40/60 4.7/2.7 5.0/2.9 dB

30/70 6.0/1.9 6.4/2.2 dB

20/80 7.9/1.2 8.5/1.4 dB

10/90 11.3/0.6 12.7/0.8 dB

5/95 15.0/0.4 16.0/0.5 dB

1/99 23.5/0.3 24.0/0.4 dB

Single Mode Single Window Splitter

Split Ratio Insertion loss (dB) P grade Insertion loss (dB) A grade Unit

50/50 3.6 3.7 dB

45/55 3.8/2.8 4.0/3.0 dB

40/60 4.4/2.5 4.8/2.8 dB

30/70 5.6/1.8 6.1/2.0 dB

20/80 7.6/1.2 8.0/1.3 dB

10/90 10.8/0.6 12.0/0.8 dB

5/95 14.0/0.4 14.5/0.5 dB

1/99 21.0/0.2 21.5/0.3 dB

( Note: All parameters are for FBT splitters without connectors.)

Specifications of the Multimode FBT Splitter (with a split ratio at 50/50)

Parameter Specifications Unit

Optional Center Wavelength 630, 850, 980, 1060, 1300 /

Split Ratio Type Equally Splitted

Port Type 1X2, 2X2 1X3 1X4 1X8 1X16 nm

Insertion Loss(50/125um) ≤4.9 ≤6.7 ≤7.8 ≤11.5 ≤15.0 dB

Insertion Loss (62.5/125um) ≤4.6 ≤6.4 ≤7.5 ≤11.0 ≤ dB

Additional Loss ≤0.15 dB

Polarization Dependent Loss ≤0.20 dB

Directivity ≥40 dB

Operating Temperature -40~+85 ℃

Storage Temperature -40~+85 ℃

Bare Fiber Package Dimension ∮3X60 ∮3X60 ∮3X60 ∮3X60 ∮5X60 mm

0.9mm Loose Tube Package

Dimension

∮3X60 100*12*8 100*12*8 100*12*8 135*100*10 mm

2.0 Or 3.0mm Loose Tube

Package Dimension

100*12*8 95*75*6 95*75*6 130*100*6 130*100*8.5 mm

Multimode (1X2) Splitter

Split Ratio Insertion Loss (dB) 50/125um Insertion Loss (dB) 62.5/125um Unit

40/60 6.5/4.5 5.8/3.6 dB

30/70 8.0/3.9 7.0/2.9 dB

20/80 9.8/3.2 9.0/2.4 dB

10/90 13.5/2.7 12.5/1.9 dB

5/95 17.0/2.4 16.5/1.5 dB

1/99 22.1/1.4 22.0/1.1 dB

Note: All parameters above are for FBT splitters without connectors.

HNK Optic Equipment Co., Limited.

5F, B Block, Babai Industrial Park,

Guangming New District

Shenzhen 518107

People's Republic of China

Tel: +86 755 86330199

Fax: +86 755 86314869

www.hnkoptic.com

sales catalog of hnk telecommunication products

Documents