safr led series - lumitron lightinglumitronlighting.com/file_product/product1339.pdf · 2013. 2....

SAFR LED SERIESHazardous Location LED Luminaire

• Class I, Division 2, Groups A, B, C & D

• Class II, Division 1 & 2, Groups E, F & G

• Class III

• Class I, Zone 2, Groups IIA, IIB & IIC

• UL 8750 LED Safety

• UL 844 Hazadardous Locations

• UL 1598 Wet Locations

• UL 1598A Marine Outside Type

• NEMA 3R & 4X

• IP66

• CUL

• ABS Type Approved

• Restricted Breathing

• AEx nR II

• Tested to LM 79 & LM 80

• Enclosed & Gasketed

• US Patent # D637,339S

S A FR LE D

177

LED

178

SAFR LED SERIESHazardous Location LED Luminaire

Large hinge permits fixture to open for “hands free” wiring. Also allows better heat dissipation of internal components.

All external hardware is stainless steel. Stainless steel inserts are available as an option.

All exterior surfaces are covered with corrosion and chemical resistant baked epoxy.

Housing and outlet boxes are high strength, corrosion resistant copper-free cast aluminum alloy.

Superior heat resistant silicone o-ring gasket makes fixture suit-able for installation indooors or outdoors. Other materials available.

Available with deep prismatic, clear low profile or frosted low profile globes.

Suitable for installation on marine environments where equipment is subject to salt water spray, either indoor or outdoor.

• UL 844 Hazardous Locations • UL 8750 LED Safety• UL 1598A Marine Outdoor

• Enclosed and Gasketed• Suitable for wet locations• Suitable for hose down applications

RIG-A-LITE

GLOBE & GUARD LC = Low Profile Clear Globe Only LCG = Low Profile Clear Globe & Guard LF = Low Profile Frosted Globe OnlyLFG = Low Profile Frosted Globe & Guard T5 = Type V (Symmetric) Closed Bottom Glass RefractorT5G = Type V (Symmetric) Closed Bottom Glass Refractor & Guard

Catalog Number Logic

1 BASIC SERIES SAFR Hazardous Location LEDClass I, Division 2, Groups A, B, C & DClass II, Division 1 & 2, Groups E, F & GClass III Simultaneous PresenceClass I, Zone 2, Groups IIA, IIB & IICEnclosed and GasketedWet LocationsNEMA 3R, 4X; IP66 UL 1598, UL1598A, UL844 & UL8750 CUL ABS Type ApprovedRestricted Breathing (Annual Testing Not Required) AEx nR II

LAMP CURRENT/LAMP WATTAGE 09 = 75 Watt 11 = 98 Watt

LAMP TYPE L = LED DRIVER VOLTAGE U = 120 to 277V 50/60 HZ N = 347/480V 60 HZ

2

3

5

4

SAFR-1 2 3 4 5 6 7

6 MOUNTING STYLEP = 3/4" Pendant Mount P1 = 1" Pendant MountC = 3/4" Ceiling Mount C1 = 1" Ceiling MountW = 3/4" Wall MountW1 = 1" Wall MountS = 1-1/4" 25° Stanchion MountS1 = 1-1/2" 25° Stanchion Mount L = 1-1/4” 90° Stanchion Mount L1 = 1-1/2” 90° Stanchion Mount K = 3/4" Cone Top K1 = 1" Cone Top

OPTIONS1

SS = Stainless Steel Inserts (304) FB1 = Single Fuse Block2,3

FB2 = Double Fuse Block2,3

TB = Terminal Block SC = Safety Cable

7

Refer to Certification Guide to determine suitability of individual fixture.

Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts.

1 Consult factory for pricing 2 Not available unless incoming voltage is specified.

When installed, one fuse block is provided for 120, 277V and two fuse blocks are provided for 208, 220, 240V. Fuse not included. Not available on 347V or 480V

3 Fuse option not available for marine listed fixtures.Certification Guide

MODELAMBIENT

°C

Class I, Div.2 CLASS Il & lllSimultaneous

PresenceUL 1598A OUTDOOR

Class I, Zone 2

AEx nR II CUL

SUPPLY WIRE

SUITABLE TEMP °C

Groups A,B,C & D GROUPS

SAFR09L 40 T4A E,F,G T6 T3C YES T4 YES 90SAFR09L 55 T4A E,F,G T6 T3C YES T4 YES 105SAFR11L 40 T3A E,F,G T6 T3A YES T3 YES 90SAFR11L 55 T3A E,F,G T6 T3A YES T3 YES 105

w w w . r i g a l i t e . c o m

Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL

SAFR SeriesLED

179


Mounting StyleConduit

Size(in.)

Catalog Number120/208/240/277V

Shipping Weight(lbs.)

CONSISTS OF

BallastHousing

OutletBox Refractor Guard

RIGID PENDANT 3/4 SAFR09-L-U-T5-G-P 21.2 SAFR09LU SMP SRT25GL SXP25WG 1 SAFR09-L-U-T5-G-P1 21.2 SAFR09LU SMP1 SRT25GL SXP25WG

CEILING MOUNT

3/4 SAFR09-L-U-T5-G-C 22.0 SAFR09LU SMC SRT25GL SXP25WG

3/4 SAFR09-L-U-T5-G-C1 22.0 SAFR09LU SMC1 SRT25GL SXP25WG

75 Watt Threaded Refractor and Guard

WALL MOUNT 3/4 SAFR09-L-U-T5-G-W 21.2 SAFR09LU SMW SRT25GL SXP25WG1 SAFR09-L-U-T5-G-W1 21.2 SAFR09LU SMW1 SRT25GL SXP25WG

25° STANCHION MOUNT 1-1/4 SAFR09-L-U-T5-G-S 21.2 SAFR09LU SMS SRT25GL SXP25WG1-1/2 SAFR09-L-U-T5-G-S1 21.2 SAFR09LU SMS1 SRT25GL SXP25WG

90° STANCHION MOUNT 1-1/4 SAFR09-L-U-T5-G-L 22.0 SAFR09LU SML SRT25GL SXP25WG1-1/2 SAFR09-L-U-T5-G-L1 22.0 SAFR09LU SML1 SRT25GL SXP25WG

LEDLED

SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CUL

180 RIG-A-LITE

75 Watt Low Profile Clear Globe and Guard


Size(in.)



CONSISTS OF

BallastHousing

OutletBox Globe Guard

RIGID PENDANT 3/4 SAFR09-L-U-LCG-P 17.2 SAFR09LU SMP SGL10T SXP10WG1 SAFR09-L-U-LCG-P1 17.2 SAFR09LU SMP1 SGL10T SXP10WG

CEILING MOUNT 3/4 SAFR09-L-U-LCG-C 18.0 SAFR09LU SMC SGL10T SXP10WG1 SAFR09-L-U-LCG-C1 18.0 SAFR09LU SMC1 SGL10T SXP10WG

WALL MOUNT 3/4 SAFR09-L-U-LCG-W 17.2 SAFR09LU SMW SGL10T SXP10WG1 SAFR09-L-U-LCG-W1 17.2 SAFR09LU SMW1 SGL10T SXP10WG

25° STANCHION MOUNT 1-1/4 SAFR09-L-U-LCG-S 17.2 SAFR09LU SMS SGL10T SXP10WG1-1/2 SAFR09-L-U-LCG-S1 17.2 SAFR09LU SMS1 SGL10T SXP10WG

90° STANCHION MOUNT 1-1/4 SAFR09-L-U-LCG-L 18.0 SAFR09LU SML SGL10T SXP10WG1-1/2 SAFR09-L-U-LCG-L1 18.0 SAFR09LU SML1 SGL10T SXP10WG




SAFR SeriesLED

181

LED



Size(in.)

Catalog Number

120/208/240/277V


CONSISTS OF

BallastHousing


RIGID PENDANT 3/4 SAFR09-L-U-LFG-P 17.2 SAFR09LU SMP SFGL10T SXP10WG1 SAFR09-L-U-LFG-P1 17.2 SAFR09LU SMP1 SFGL10T SXP10WG

CEILING MOUNT 3/4 SAFR09-L-U-LFG-C 18.0 SAFR09LU SMC SFGL10T SXP10WG1 SAFR09-L-U-LFG-C1 18.0 SAFR09LU SMC1 SFGL10T SXP10WG

WALL MOUNT 3/4 SAFR09-L-U-LFG-W 17.2 SAFR09LU SMW SFGL10T SXP10WG1 SAFR09-L-U-LFG-W1 17.2 SAFR09LU SMW1 SFGL10T SXP10WG

25° STANCHION MOUNT 1-1/4 SAFR09-L-U-LFG-S 17.2 SAFR09LU SMS SFGL10T SXP10WG1-1/2 SAFR09-L-U-LFG-S1 17.2 SAFR09LU SMS1 SFGL10T SXP10WG

90° STANCHION MOUNT 1-1/4 SAFR09-L-U-LFG-L 18.0 SAFR09LU SML SFGL10T SXP10WG1-1/2 SAFR09-L-U-LFG-L1 18.0 SAFR09LU SML1 SFGL10T SXP10WG

75 Watt Low Profile Frosted Globe and Guard


LEDLED


182 RIG-A-LITE



SAFR SeriesLED

183

LED


Candlepower Distribution Deg Parl. 22.5 45 67.5 Norm 0 1515 1515 1515 1515 1515 15 1659 1629 1683 1645 1608 25 1549 1478 1527 1580 1609 35 1099 1193 1223 1229 1100 45 858 851 858 865 863 55 642 666 709 680 663 65 340 328 340 348 307 75 181 178 179 173 171 85 69 73 72 71 68 90 37 39 39 37 36

SAFR09LULCGXX


SAFR09LULFGXX


Total Lumens 2489Input Power

(watts)75.1

Efficacy (Lumens/Watt)

33.1

CRI 73CCT 5658


(watts)74.9


52.8

CRI 73CCT 5769


(watts)74.9


47.6

CRI 72CCT 5658

SAFR09LUT5GXX

WALL MOUNT 3/4 SAFR11-L-U-T5-G-W 21.2 SAFR11LU SMW SRT25GL SXP25WG1 SAFR11-L-U-T5-G-W1 21.2 SAFR11LU SMW1 SRT25GL SXP25WG

25° STANCHION MOUNT 1-1/4 SAFR11-L-U-T5-G-S 21.2 SAFR11LU SMS SRT25GL SXP25WG1-1/2 SAFR11-L-U-T5-G-S1 21.2 SAFR11LU SMS1 SRT25GL SXP25WG

90° STANCHION MOUNT 1-1/4 SAFR11-L-U-T5-G-L 22.0 SAFR11LU SML SRT25GL SXP25WG1-1/2 SAFR11-L-U-T5-G-L1 22.0 SAFR11LU SML1 SRT25GL SXP25WG


Size(in.)

Catalog Number*120/208/240/277V


CONSISTS OF

BallastHousing

OutletBox Refractor Guard

RIGID PENDANT 3/4 SAFR11-L-U-T5-G-P 21.7 SAFR11LU SMP SRT25GL SXP25WG 1 SAFR11-L-U-T5-G-P1 21.7 SAFR11LU SMP1 SRT25GL SXP25WG

CEILING MOUNT

3/4 SAFR11-L-U-T5-G-C 22.5 SAFR11LU SMC SRT25GL SXP25WG

3/4 SAFR11-L-U-T5-G-C1 22.5 SAFR11LU SMC1 SRT25GL SXP25WG

98 Watt Threaded Refractor and Guard

Refer to Certification Guide to determine suitability of individual fixture. * Catalog Nos. shown are for fixtures with IES Type V closed bottom glass refractors, for other type refractors, refer to Catalog Number Logic.

LEDLED


184 RIG-A-LITE


Size(in.)



CONSISTS OF

BallastHousing


RIGID PENDANT 3/4 SAFR11-L-U-LCG-P 17.2 SAFR11LU SMP SGL10T SXP10WG1 SAFR11-L-U-LCG-P1 17.2 SAFR11LU SMP1 SGL10T SXP10WG

CEILING MOUNT 3/4 SAFR11-L-U-LCG-C 18.0 SAFR11LU SMC SGL10T SXP10WG1 SAFR11-L-U-LCG-C1 18.0 SAFR11LU SMC1 SGL10T SXP10WG

WALL MOUNT 3/4 SAFR11-L-U-LCG-W 17.2 SAFR11LU SMW SGL10T SXP10WG1 SAFR11-L-U-LCG-W1 17.2 SAFR11LU SMW1 SGL10T SXP10WG

25° STANCHION MOUNT 1-1/4 SAFR11-L-U-LCG-S 17.2 SAFR11LU SMS SGL10T SXP10WG1-1/2 SAFR11-L-U-LCG-S1 17.2 SAFR11LU SMS1 SGL10T SXP10WG

90° STANCHION MOUNT 1-1/4 SAFR11-L-U-LCG-L 18.0 SAFR11LU SML SGL10T SXP10WG1-1/2 SAFR11-L-U-LCG-L1 18.0 SAFR11LU SML1 SGL10T SXP10WG


98 Watt Low Profile Clear Globe and Guard



SAFR SeriesLED

185

LED


WALL MOUNT 3/4 SAFR11-L-U-LFG-W 17.2 SAFR11LU SMW SGL10T SXP10WG1 SAFR11-L-U-LFG-W1 17.2 SAFR11LU SMW1 SGL10T SXP10WG

25° STANCHION MOUNT 1-1/4 SAFR11-L-U-LFG-S 17.2 SAFR11LU SMS SGL10T SXP10WG1-1/2 SAFR11-L-U-LFG-S1 17.2 SAFR11LU SMS1 SGL10T SXP10WG

90° STANCHION MOUNT 1-1/4 SAFR11-L-U-LFG-L 18.0 SAFR11LU SML SGL10T SXP10WG1-1/2 SAFR11-L-U-LFG-L1 18.0 SAFR11LU SML1 SGL10T SXP10WG


98 Watt Low Profile Frosted Globe and Guard


Size(in.)



CONSISTS OF

BallastHousing


RIGID PENDANT 3/4 SAFR11-L-U-LFG-P 17.2 SAFR11LU SMP SGL10T SXP10WG1 SAFR11-L-U-LFG-P1 17.2 SAFR11LU SMP1 SGL10T SXP10WG

CEILING MOUNT 3/4 SAFR11-L-U-LFG-C 18.0 SAFR11LU SMC SGL10T SXP10WG1 SAFR11-L-U-LFG-C1 18.0 SAFR11LU SMC1 SGL10T SXP10WG

LEDLED


186 RIG-A-LITE




SAFR11LUT5GXX

SAFR11LULCGXX

SAFR11LULFGXX



SAFR SeriesLED

187

LED



(watts)98.5


59.7

CRI 69CCT 5944


(watts)98.4


73.1

CRI 71CCT 6212


(watts)98.3


65.9

CRI 71CCT 6084


LEDLED


188 RIG-A-LITE




SAFR SeriesLED

189

LED


Accessories


Conduit Shipping Catalog Hub Weight Outlet Boxes No. Size (In.) (Lbs.)

Rigid Pendant

Ceiling Mount

Wall Mount

Stanchion Mount (25°)


Cone Mount

SMP 3/4 3.3

SMP1 1 3.3

SMC 3/4 4.1

SMC1 3/4 4.1

SMK 3/4 14.5

SMK1 1 14.5

SMW 3/4 7.8

SMW1 1 7.8

SMS 3/4 5.9

SMS1 1 5.9

SML 3/4 5.9

SML1 1 5.9

LEDLED


190

.19

Shipping Catalog Weight Photo Cell Kit* No. Description (Lbs.)

SPH25-120

Automatic on-offswitch atpredeterminedlight levels.120 volt only.

REQUIRESFIELDINSTALLATION.

* Not Suitable for hazardous locations.

HLP-120

HLP-208-277

Hazardous Shipping Location Catalog Weight Photo Cell Kit* No. Description (Lbs.)

.25

.25

Automatic on-offswitch atpredeterminedlight levels.(120 volt only)


RIG-A-LITE


Hazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CSA Certified

SAFR SeriesLED

103

LED



1.50

1.00

Stainless Steel Wire Guard for Type 1, 3 & 5 refractors

Stainless Steel Wire Guard for Low Profile Clear and Frosted Globes

.06

Open fuse block kit- 600 volt AC maximum.

HLP-120

HLP-208-277

Hazardous Shipping Location Catalog Weight Photo Cell Kit* No. Description (Lbs.)

.25

.25

Automatic on-offswitch atpredeterminedlight levels.(120 volt only)


.19

Shipping Catalog Weight Photo Cell Kit* No. Description (Lbs.)

SPH25-120

Automatic on-offswitch atpredeterminedlight levels.120 volt only.


* Not Suitable for hazardous locations.

Fixtures ordered with refractors are not suitable to be ordered with reflectors.

Accessories Shipping Catalog Weight Guards No. Description (Lbs.)

SXP25WG

SXP10WG

Shipping Catalog Weight Fuse Kit No. Description (Lbs.)

SBF600

Shipping Catalog Weight Glass Globe No. Description (Lbs.)

SRT25GL

SGL10T

SFGL10T

6.6

4.2

4.2

IES Type V light distribution (asymmetrical)

Low Profile Clear Globe Low Profile Frosted Globe

Accessories Shipping Catalog Weight Reflectors No. Description (Lbs.)

SR40D➀

SR40DD➀

SR40A➀

SR40HB➀

Standard Dome ReflectorFiberglassReinforcedPolyester for use with 7 3/4 in. dia. Globe

Deep Dome ReflectorClear Prismatic Acrylic for use with 7-3/4 in. dia. Globe

30° AngleReflectorFiberglassReinforcedPolyester for use with 7-3/4 in. dia. Globe

High BayAluminumReflector withbaked onwhite enamelfor use with 7-3/4 in. dia. Globe

3.0

7.0

4.5

5.0

➀ Not suitable for wall mount applications.


Conduit Shipping Catalog Hub Weight Outlet Boxes No. Size (In.) (Lbs.)

Rigid Pendant

Ceiling Mount

Wall Mount



Cone Mount

SMP 3/4 3.3

SMP1 1 3.3

SMC 3/4 4.1

SMC1 3/4 4.1

SMK 3/4 14.5

SMK1 1 14.5

SMW 3/4 7.8

SMW1 1 7.8

SMS 3/4 5.9

SMS1 1 5.9

SML 3/4 5.9

SML1 1 5.9

LEDLED

RIG-A-LITE

SAFR SeriesHazardous Locations • Class I, Division 2 • Class II • Class III • UL 1598, 1598A, 844 & 8750 • Wet Locations • CSA Certified

102

INSTALLATION DATA SHEET

SAFR LED SERIES LED LUMINAIRE FOR USE IN Class I Division 2 Groups A, B, C, D; Class II

Groups E, F, G; Class III WARNING!

1. To reduce risk of fire or explosion, do not install where the marked operating temperature

exceeds the ignition temperature of the hazardous atmosphere(s). 2. These Luminaire Fittings should be installed by qualified technicians using suitable

hazardous locations wiring methods in strict accordance with the National Electrical Code, NFPA 70 and any local requirements.

3. To prevent risk of electrical shock deactivate/ disconnect power supply before opening.

Keep tightly closed when in operation.

SAFR LED SERIES FIXTURE WHEN COMPLETELY ASSEMBLED WITH (1) GLOBE AND (1) OUTLET BOX (MOUNTING COVER). GUARD AND REFLECTORS ARE OPTIONAL. SEE TABLE BELOW. OUTLET BOXES (MOUNTING COVERS) (ONE REQUIRED) SMP, SMP1, SMC, SMC1, SMW, SMW1, SMS, SMS1, SML, SML1 OPTICS (ONE REQUIRED) GLOBE - SGL10T, SFGL10T, SRT25GL OPTIONS GUARD - SXP10WG EXTERNAL RELFECTORS – SR25A, SR25D

INSTALLATION:

1. Before installing, check the carton label and luminaire ballast housing label to insure that you have the correct luminaire fittings.

2. BEFORE INSTALLING, MAKE SURE THAT THE CIRCUIT IS DEACTIVATED.

3. Using Fig. 1 as your guide, install the outlet box (mounting cover) securely. Refer to the outlet box (mounting cover) installation

instructions provided with the outlet box (mounting cover) for details.

4. Hang the luminaire housing Fig.1 on the outlet box (mounting cover) hinge.

FIGURE 1

5. Install the luminaire housing green (ground) lead on the outlet box (mounting cover) using the provided green screw to secure it in place.

6. Power leads are clearly marked. Select the correct voltage leads as determined by the supply voltage to the luminaire and install the incoming black and white leads to the respective driver leads using the wire nuts provided.

Rig-A-Lite Tel: (713)943-0340 Visit us at: 8500 Hansen Rd Fax: (713)943-8354 http://www.rigalite.com Houston, TX 77075 Email: [email protected] SAFR May 2011 Rev.0

INSTALLATION DATA SHEET

SAFR LED SERIES

7. Close the luminaire housing against the outlet box (mounting cover) securely by tightening the screw provided with the ballast housing.

8. Install the globe, reflector and guard if

needed.

OPERATION: 1. Operate the complete assembled luminaire at its rated voltage and frequency. See the luminaire housing

label for this data. MAINTENANCE DATA: CAUTION: DISCONNECT THE SUPPLY CIRCUIT BEFORE OPENING THE LUMINAIRE

1. Although no routine maintenance is required to keep this luminaire functional, it is recommended that the globe be kept clean for optimum performance.

2. When parts wear out or become defective due to adverse environment or due to normal aging process contact Rig-A-Lite for replacement information.

Rig-A-Lite Tel: (713)943-0340 Visit us at: 8500 Hansen Rd Fax: (713)943-8354 http://www.rigalite.com Houston, TX 77075 Email: [email protected] SAFR May 2011 Rev.0

SAFR Series 75 Watt LED Hazardous Location/Marine Outside Rated Fixture

US Patent Number D637,339S

Listings and Approvals •Class I, Division 2 Groups A, B, C & D

•Class II, Division 1 & 2 Groups E, F & G •Zone 2, Groups IIA, IIB & IIC

•Class III •CUL •Enclosed & Gasketed •Wet Locations

•Simultaneous Presence •AExnR II •NEMA 3R, 4X •IP66

•UL 8750 LED Safety •Tested to LM79 & LM 80 standards •UL 1598A Marine Outside Type •UL 844 Hazardous Locations

The SAFR luminaries are UL listed for hazardous & severe environments and constructed of copper

free (less than 0.4%) cast aluminum. The finish is chemical and corrosion resistant baked-on powder epoxy. It also features external stainless steel hardware. Electro-polished stainless steel wire guards are also available. They are also available with your choice of a traditional type five refractor, a patented clear, low profile globe that maximizes light output or a frosted, low profile globe designed with both performance and safety in mind.

Product Features • 60,000 or more rated lamp life • 5,000 CCT (K) • 4,004 delivered lumens (clear globe) • 3,607 delivered lumens (frosted globe) • 2,489 delivered lumens (T5 Optics)

• 40 LEDs

• 75 Input Watts • 120-277V 50/60 Hz • 52.8 Lm/W (clear globe) • 47.6 Lm/W (frosted globe) • 33.1 Lm/W (T5 Optics)

• 347/480V 60HZ

• -30° C to 55° C • CRI: > 75 • T6 temperature rated • Five Year Warranty against manufacturers

defect or light loss

Catalog Number Logic

1 BASIC SERIES SAFR Hazardous Location LEDClass I, Division 2, Groups A, B, C & DClass II, Division 1 & 2, Groups E, F & GClass III Simultaneous PresenceZone 2, Groups IIA, IIB & IICEnclosed and GasketedWet LocationsNEMA 3R, 4X; IP66 UL 1598, 1598A, 844 & 8750 CULRestricted Breathing (Annual Testing Not Required) AEx nR II

LAMP CURRENT/LAMP WATTAGE 09 = 75 Watt 11 = 98 Watt

LAMP TYPE L = LED DRIVER VOLTAGE U = 120 to 277V 50/60HZ N = 347/480V 60HZ

2

3

5

4

GLOBE & GUARD LC = Low Profile Clear Globe Only LCG = Low Profile Clear Globe & Guard LF = Low Profile Frosted Globe Only LFG = Low Profile Frosted Globe & Guard T5 = Type V (Symmetric) Closed Bottom Glass Refractor T5G = Type V (Symmetric) Closed Bottom Glass Refractor & Guard

SAFR-09-L-U-LFG-C-1 2 3 4 5 6 7

6 MOUNTING STYLE P = 3/4" Pendant Mount P1 = 1" Pendant Mount C = 3/4" Ceiling Mount C1 = 1" Ceiling Mount W = 3/4" Wall Mount W1 = 1" Wall Mount S = 1-1/4" 25° Stanchion MountS1 = 1-1/2" 25° Stanchion Mount L = 1-1/4” 90° Stanchion Mount L1 = 1-1/2” 90° Stanchion Mount K = 3/4" Cone Top K1 = 1" Cone Top

OPTIONS1

SS = Stainless Steel Inserts (304) FB = Fuse Block2,3

TB = Terminal Block

7

HRefer to Certification Guide on page to determine suitability of individual fixture.

Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts.

1 Consult factory for pricing 2 Not available with multi-tap ballast unless

incoming voltage is specified. When installed, one fuse block is provided for 120, 277V and two fuse blocks are provided for 208, 240 and 480V. Fuse not included.

3 Fuse option not available for marine listed fixtures.



SAF SeriesLED



SAFR SeriesLED

191

LED



1.5

1.0

Stainless Steel Wire Guard for Type 1, 3 & 5 refractors

Stainless Steel Wire Guard for Low Profile Clear and Frosted Globes

.5Open fuse block kit- 600 volt AC maximum.

Fixtures ordered with refractors are not suitable to be ordered with reflectors.

Accessories Shipping Catalog Weight Guards/Fuse Kit No. Description (Lbs.)

SXP25WG

SXP10WG

SBF600

Shipping Catalog Weight Glass Globe No. Description (Lbs.)

SRT25GL

SGL10T

SFGL10T

6.6

4.2

4.2

IES Type V light distribution (asymmetrical)

Low Profile Clear Globe Low Profile Frosted Globe

safr led series - lumitron lightinglumitronlighting.com/file_product/product1339.pdf · 2013. 2....

Documents