PVC SOLUTIONSPVC SOLUTIONS

Specified FittingsN

W E

S

Specified Fittings

N

W E

S

Bellingham, WA164 West Smith Rd.

Bellingham, WA 98226(360) 398-7700

Stevensville, MT483 Stevensville Airport Road

Stevensville, MT 59870(406) 777-3466

Early Branch, SC320 Commerce ParkwayEarly Branch, SC 29916

Three Convenient Manufacturing Facilities Located In:

Visit us at: specifiedfittings.com

A Full Line of Fabricated Fittings 60” and Smaller

Huge Inventory of Molded and Fittings

Competitively Priced Solutions

In-House CAD Design

Ship Anywhere in North America

We Make You Look Good!

Contact our friendly customer service sta� for helpful information on sizes and

availability along with useful technical information.

What We Do... 99% on-time shipments

One of the only HDPE & PVC manufacturers in North America

Customer service that has a small business feel and is 2nd to none

Over 30 years of well-established manufacturing cababilities

We have three factories producing parts 24 hours a day, located

in Bellingham, Washington; Stevensville, Montana; and Early

Branch, South Carolina.

CSA Approved

Visit us at www.speci�ed�ttings.com.

Added Bene�ts of Choosing Speci�ed Fittings

We are available Monday through Friday:PVC - (360) 398-7700 from 6AM - 5PM PST

HDPE - (406) 777-3466 from 6AM - 5PM MST PVC from 6AM - 5PM PSTHDPE from 6AM - 5PM MST

PVC FABRICATED FITTINGS

PVC MOLDED FITTINGS

PVC SPECIFICATIONSPVC FABRICATED FITTINGS (CONT’D) MACHINE SHOP & OTHER SERVICES

ALSO WORTH NOTING

TeesLine tees up to 54”.Reducing tees through 60”.

We fabricate PVC �ttings in our Bellingham, Washington facility. These �ttings are available in sizes 1/8” through 60” in all con�gurations and ends where applicable.

Speci�ed Fittings certi�es the referenced materials’ conformance to the following Standards and Speci�cations:

We stock a wide variety of molded PVC �ttings in our Bellingham, Washington facility as well as our Preston, Idaho; Kearney, Nebraska; and Lubbock, Texas warehouses.

Our inventory of molded �ttings include:

Hydro TestingThis service is available in both Bellingham, WA and Stevensville, MT. Contact hdpesales@specfit.com for HDPE and pvcsales@specfit.com for PVC testing.

FM TestingThe world’s most-trusted leader in third party certi�cation.

HDPE FittingsWe o�er a full line of fabricated and molded PVC �ttings. In fact, we are the largest PVC fabricated manufacturer in the US!

Data-Logging ServicesWe proudly offer Data Logging Services for our fabricated and fused HDPE products. Please contact our HDPE Sales Department (hdpesales@specfit.com) for more information.

Speci�ed Fittings has two complete machine shops (Bellingham, Stevensville) that can do a myriad of functions:

* Fittings can be manufactured and tested in conformance to CSA requirements—limited to: 4” - 48” Solvent Weld/Gasketed SDR35 Sewer and SDR26 Heavy Wall Sewer. Any of these options must be noted at time of quote submittal and order submission.

Elbows90° (3pc & 5pc), 60° (3pc), 45° (3pc & 2pc), 30° (2pc), 22-1/2° (2pc), 11-1/4° (2pc), and custom angles and piece count available upon request.

ValvesAvailable in 6” through 12” in Surface, PIP, or Sewer pipe. Terminal backwater and Inline valves available in 4” through 24”.

PVC StructuresManholes, Tanks, Spools, Headers, Manifolds. 2” through 48”. If you can dream it, we can build it!

Vanstone FlangesAvailable from 2” through 48”.

WyesAvailable from 4” through 54” in both 45° wyes and in true wyes.

CrossesAvailable in 4” through 54”.

“Sanded” Manhole AdaptersAvailable in 4” through 60” and in single or double gasket style.

Spec-Loc FittingsAvailable in 4” through 24” in C-900 and IPS. Made in White, Blue, or Purple colors.

High De�ection CouplingsAvailable from 14” through 30” in C-900 in Purple, Blue, or Green colors.

Sweep BendsAvailable through 21”.

Bolted Repair CouplingsAvailable from 4” through 15” in IPS with Stainless Steel or Zinc bolts in lengths of 12” or 18”.

ElbowsStandard sizes and angles 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.

TeesStandard sizes 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.

ReducersStandard sizes 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.WyesStandard sizes 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.Saddle Tees and WyesStandard sizes 4” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.

CapsStandard sizes 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.AdaptersStandard sizes 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.CouplersStandard sizes 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.CrossesStandard sizes 1/2” through 8” in IPS, PIP, Schedule 40, Schedule 80, SDR35 SWR, SDR26 HWS.

CNCCapabilities up to 24”.

Drilling / BoringWe can o�er specialty perforated piping as well as custom made parts.

MachiningWe have large machine shops capable of turning up to 20 ft. in diameter parts to whatever speci�cation or special application you may need.

ThreadingAvailable in sizes 2” through 18” in various applications. Can be to NPT or custom speci�cation.

Looking for steel, stainless, or other metal components for PVC or HDPE bids? We are open to bidding projects including: Fish Hatcheries WWTP WTP

Desalinization Plants Pump Rooms and many more!

Drains and BasinsAvailable in 6” through 48” in a myriad of custom speci�cations. Call us today!

CapsAvailable in 6” through 48”.

ASTM D1784 Standard Speci�cation for Rigid Poly(Vinyl Chloride) (PVC)

Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

ASTM F441 ASTM F441/F441M-15 Standard Speci�cation for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

ASTM D3139 ASTM D3139-98(2011) Standard Speci�cation for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

ASTM D3034ASTM D3034-16 Standard Speci�cation for Type PSM

Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

ASTM F679 ASTM F679-16 Standard Speci�cation for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

ASTM D3212ASTM D3212-07(2013) Standard Speci�cation for Joints for

Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

ASTM F477ASTM F477-14 Standard Speci�cation for Elastomeric Seals

(Gaskets) for Joining Plastic Pipe

ASTM F1336ASTM F1336-15 Standard Speci�cation for Poly(Vinyl

Chloride) (PVC) Gasketed Sewer Fittings

AWWA C900-16AWWA C900-16 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In. (100 mm Through

1,500 mm)

ASTM D2241ASTM D2241-15 Standard Speci�cation for Poly(Vinyl

Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

ASTM F437ASTM F437-15 Standard Speci�cation for Threaded

Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

ASTM F439ASTM F439-13 Standard Speci�cation for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

ASTM D2464ASTM D2464-15 Standard Speci�cation for Threaded

Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

ASTM D2466ASTM D2466-17 Standard Speci�cation for Poly(Vinyl Chloride)

(PVC) Plastic Pipe Fittings, Schedule 40

ASTM D2467ASTM D2467-15 Standard Speci�cation for Poly(Vinyl Chloride)

(PVC) Plastic Pipe Fittings, Schedule 80