ryko repcat

SONNY’SReplacement

Catalog

April 2015

In the United States: 800-327-8723International: 954-720-4100

www.SonnysDirect.com We make car washing easy!TM

The Tunnel ExpertsTM

RightParts RightPrice RightNow

FOR

Ryko®

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S

© 2015 SONNY’S Enterprises, Inc. All prices & availability subject to change without notice.We make car washing easy! @ www.SonnysDirect.com2

SoftGloss Top Brush Parts

Sonny's # Ryko # Description Price

10004277 10187-202 AMI Bearing 2 Bolt Flange 1in $18.43


10008623 17741-00 Electra Gearbox SG 25:1 56C Left Output $659.75


20005148 21827-005 Shaft, Ryko SG TopBrush 1" x 4" 21827005 $71.92

20010395 - Shaft, Ryko Adapter to C-Channel Unihub 99.00

Top Brush Gearbox• 1in shaft

• Softgloss

• 25:1 Ratio

• 56C frame

• Left hand output shaft

Shaft For Top Brush• Stress-proof steel

• Fits RYKO hubs

• Fits SONNY'S hubs


10007646 10200-201 Cylinder Ryko 2.5in Bore x 8.75in Stk $214.55

10001293 - Elbow N4ME4 1/4in Tube x 1/4in MPT 1.38

Double Eye Clevis Mount• Mounts on the end of #10007646

• Pin & cotter sold separately

Single Eye Clevis Mount• Mounts in connection with #10004164



10004164 10200-203 Clevis Female Eye D250 for Ryko Cylinder $16.89

10001324 - Clevis Pin 1/2in x 2in w/Bridge Pin 1.66


10004165 10210-00 Clevis Male Eye C250 for Ryko Cylinder $16.89



10004754 10200-202 Rod Eye Female Rod Thread 1/2-20 UNF $25.11


Rod Clevis• 1/2-20in thread

• 1/2in pin hole


10004754

10004165

1000416410001324

10001324

10001324

10001293

Air Cylinder For Brush Arm• 2-1/2in x 8-3/4in • 3/8in NPT with 1/4in NPT port reducer bushings

• Lightweight diecast • Aluminum end caps

• 1/2in-20 UNF rod thread

WEG Motor 1HP• 1HP • 208-230/460v

• 1750RPM • Amps: 3.25-3.10/1.55 A

• 3 phase • 56C frame

• 60Hz • TEFC

Usable at 208 volt operation.

2-Bolt FlangeNormal Duty with Contact Seal

3-57/64 in

10007646

200051481in Dia x 4in L


10007736 10660-211 Weg Motor 1HP 1800RPM 3Ph 56C 230/460V $189.83

20010395

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S

All replacement parts listed for any car wash manufacturer’s equipment other than SONNY’S, including Autec®, AVW™, Belanger®, Econocraft®, Flapan™, Hanna™, MacNeil™, MarkVII™, PDQ™, Peco™, N/S™, Sherman™, and Slant™, are manufactured by SONNY’S or another manufacturer as a replacement part for each respective manufacturer’s equipment.

Same day shipping on over 12,000 items, 1-800-327-8723 or fax 1-800-495-4049 3

www.SonnysDirect.com SoftGloss Top Brush Parts


10005644 10780-202 Lovejoy Coupler AL110 Half 1in Bore $50.82

Coupler• 1in Bore

• Used on top brush

• 2 1/2in OD

Old style top brush shaft• 1 3/8in Diameter

• 5 1/2in Length

• Stress-proof steel


20005111 22128-101 Bearing Block Ryko Left Hand Softgloss $31.42

20005398 22128-100 Bearing Block Ryko Right Hand Softgloss 31.42


20002303 10787-201 Lovejoy Spider L110 Urethane Plastic $61.58

Sonny's # Description Price

20005049 Shaft, Ryko SG 1-3/8in x 5.5in Lgth $27.20


10005816 14526-026 Prox Switch EI3015NPOPS-10M Short Barrel $51.63


10005835 14526-024 Prox Switch EI3015 NPOPL-10M Long Barrel $55.73

Top Brush UMHW Bearing Left & Right Side• 2.2in bore

• SoftGloss

Short BarrelProximity Switch• Used on front arms, top brush

and wiper

• 30ft lead

Long BarrelProximity Switch• Used on gantry, wheel scrubber

and rear arms

• 30ft lead

20005111 20005398

Lovejoy Spiders UrethaneUrethane has 1.5 times greater torque capability than NBR and offers good resistance to oil and chemicals. However this material provides less dampening effect and operates at a temperature range of -30º F to +160º F

www.SonnysDirect.comShop online at :

We make car washing easy!

• MORE PARTS • UPDATED PRICES • FREE CATALOGS

Item # Description Price

10004514 Rubber Stop 2in O.D. x 1.5in Length $23.12

2in O.D. Rubber Stop• Rod course thread 1/4-20in

• 1-3/4in stud length

• Used on: - RYKO® arms, Top Brush and Soft Gloss Rail Tracks

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S


SoftGloss Front / Rear Brush Parts


10004898 10187-207 AMI Bearing 2 Bolt Flange 1-7/16in $23.78





2-Bolt Flange Bearing• For front brush shaft

• 1-1/4in shaft bore

• E measurement 5-1/8

2-Bolt Flange Bearing• For rear brush shaft



2-Bolt Flange Bearing• For front/rear arms




10008623 17741-000 Electra Gearbox SG 25:1 56C Left Output $659.75

10008593 17741-001 Electra Gearbox SG 25:1 56C Right Output 682.85

20005135 - Electra Gearbox Foot Plate Arm 15.92

SoftGloss Gearbox LH & RH• 1in shaft

• 25:1 ratio

• 56c frame

10008623 10008593

WEG Motor 1HP• 1HP • 208-230/460v

• 1750RPM • Amps: 3.25-3.10/1.55 A


• 60Hz • TEFC




10007646 10200-201 Cylinder Ryko 2.5in Bore x 8.75in Stk $214.55

10001293 - Elbow N4ME4 1/4in Tube x 1/4in MPT 1.38

Double Eye Clevis Mount• Mounts on the end of #10007646


Single Eye Clevis Mount• Mounts in connection with #10004164



10004164 10200-203 Clevis Female Eye D250 for Ryko Cylinder $16.89



10004165 10210-00 Clevis Male Eye C250 for Ryko Cylinder $16.89



10004754 10200-202 Rod Eye Female Rod Thread 1/2-20 UNF $25.11


Rod Clevis• 1/2-20in thread

• 1/2in pin hole


10004754

10004165

1000416410001324

10001324

10001324

10001293

Air Cylinder For Brush Arm• 2 1/2in x 8 3/4in • 3/8in NPT with 1/4in NPT port reducer bushings

• Lightweight diecast • Aluminum end caps


10007646Usable at 208 volt operation.

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



www.SonnysDirect.com Front / Rear Washer Parts



10005835 14526-026 Prox Switch EI3015 NPOPL-10M Long Barrel 55.73


20004526 21827-006 Shaft, Ryko SG 1.5in x 16in 21827-006 $81.06

20002286 21827-004 Shaft, Ryko SG 1.25in x 13in 21827-004 82.62

SoftGloss Rear and Front Brush ShaftsRear Shaft: 1-1/2in x 16inFront Shaft: 1-1/4in x 13in


10003788 19524-005 Oval 6-1/2in Light, 10 LED Amber w/Plug $29.57

10005015 19524-006 Oval 6-1/2in Light, 10 LED Green w/Plug 35.89

10003836 19524-004 Oval 6-1/2in Light, 10 LED Red w/Plug 26.41

10001848 - Oval Decal for Strobe Light, Back-Up 2.59

LED Oval Lights• 12V

• 10 LED lights

• Includes grommet & plug

Proximity Switch

• Used on front arms & wiper• 30ft lead

• Used on wheel scrubber & rear arms• 30ft lead

BACK-UP

10001848

Used on amber light only.

10003788

10005015

10005835 10005816

20004526 20002286

10003836


20004336 10180-132 Electra Gearbox 25:1 Left Output w/FLGE $890.56

20004295 10180-133 Electra Gearbox 25:1 Right Output w/FLGE 890.56

Front Flange Gearbox Left Side and Right Side• For SoftGloss

• Front arms

• 25:1 ratio

20004336 20004295


20002303 10787-201 Lovejoy Spider L110 Urethane Plastic $61.58


10005806 10780-201 Lovejoy Coupler AL110 Half 1-1/4in Bore $50.82


10005805 10780-207 Lovejoy Coupler AL110 Half 1-1/2in Bore $50.82

Front Arm Coupler• 1-1/4in Bore

• Aluminum construction

Rear Arm Coupler• 1-1/2in Bore

• Aluminum construction

Lovejoy Spiders UrethaneUrethane has 1.5 times greater torque capability than NBR and offers good resistance to oil and chemicals. However this material provides less dampening effect and operates at a temperature range of -30º F to +160º F

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



20003741 20029-000 Ryko Photo Eye Bracket Wheel Scrubber $76.78

SoftGloss Wheel Scrubber Parts


10009643 23660-101 Ryko Photo Eye Bracket Driver Side Exit $75.20


10009644 20106-000 Ryko Wheel Proximity Switch Bracket $34.10


10007636 14786 Cylinder Ryko 2in Bore x 13in Stk SMC $222.59

10003289 - SMC DUP00172 Repair Kit for 2in x 13 STK 8.58

10001451 - SMC GR-S-010 Grease Pack for Cylinder 1.89


20002239 18059-000 Electra Gearbox Conver. Whl Scrubb Assy $813.36

Exit Photo Eye Bracket Driver SideSoftGloss

Exit Photo Eye BracketCenter Side• SoftGloss

• Voyager II

Proximity Switch BracketUsed on SoftGloss Wheel Scrubber.

Helical Gearbox• 12.5:1

• C-Face

• Replaces RYKO OEM gearbox

Proximity Switch

• Used on front Arms & Wiper• 30ft lead

• Used on wheel scrubber & rear arms• 30ft lead

10001451

10007636


20005123 23660-100 Ryko Hub SS Triangle for Wheel Scrubber $125.00

Sonny's # Description Price per pair

10007213 Wheel Brush 18in Round Bristle PE Black $458.00

Hub Weldment• For SoftGloss wheel scrubber

• Stainless steel

• Replacement for RYKO wheel brush

• 1-1/4in shaft

18in Round Wheel Brush• 5-1/2in bristle length

• Used on Ryko and OEM In-Bay Units

• Color: Black

• Sold in Pairs

WEG Motor 1HP• 1HP • 208-230/460v

• 1750RPM • Amps: 3.25-3.10/1.55 A


• 60Hz • TEFC

Usable at 208 volt operation

Air Cylinder For Brush Arm• 2in x 13in • 3/8in NPT with 1/4in NPT port reducer bushings

• 1in diameter • Stainless steel rod thread






10005835 14526-026 Prox Switch EI3015 NPOPL-10M Long Barrel 55.73

10005835 10005816

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



www.SonnysDirect.com SoftGloss Wheel Scrubber & Gantry Drive Parts


10008361 10163-107 Electra Gearbox 30:1Drive 1in Shaft Bore $505.75


20010537 18943-001 Wheel, Drive /Ryko SoftGloss 18943-001 $219.00


20010538 10719-001 Wheel, Idler /Ryko SoftGloss 10719-001 $199.00


10004899 10203-206 AMI Bearing 2 Bolt Pillow Block 1-1/4in $23.78


10007365 12703-030 Banner SMA30PEL Emitter Photo Switch $135.14

10007464 12703-029 Banner SM30PRL Receiver Photo Switch 173.83


20013408 20021-000 Torque Arm, for Voyager 2 and Softgloss $84.99

Drive Gearbox Hollow Shaft• 1in bore

• 30:1

• C-Face

Idler WheelFor SoftGloss

Pillow Block Bearing• 1 1/4in, 2 bolt

• Soft gloss wheel bearing

• Voyager II & Softgloss

Photo Eye Emitter & Receiver• SMA30PEL Voltage: Universal 12 to 240V AC / 10 to 30V DC

• SM30PRL Voltage: 10 to 30V DC

• 6.5 ft lead

• Used on wheel scrubber

Torque Arm• Fits Voyager II & Softgloss

• 1/2in ID bore


10001293 Elbow N4ME4 1/4in Tube x 1/4in MPT $1.38

Male ElbowTube to NPT

Drive WheelFor SoftGloss

WEG Motor 1HP• 1HP • 208-230/460V

• 1750RPM • Amps: 3.25-3.10/1.55 A

• 3-phase • 56C frame

• 60Hz • TEFC

Usable at 208 volt operation.



10007365 10007464

4-11/16in

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S


SoftGloss Electrical Panel Parts


20002810 Contactor 100-C37 24VAC 10HP 3Pole $193.50


10008245 VFD for SoftGloss Delta VFD015M21A $434.44


10005741 Fuse Holder 140F-D3C-C30L 30AMP Max $48.15


10008016 Motor Overload Protector 140M-F8E-C32 $283.50


10007543 Motor Overload Protector 140M-C2E-B40 $163.50

Dryer Motor Contactor• 50 amps

• 3-Pole

• 24V AC coil

• Aux contactor

Dryer Motor Overload• 20-32 amps

• 3 Pole

• Aux contactor

Motor Overload• 2.5 - 4 amps

• 3 pole

• Aux contactor

• Used on gantry drive, front/rear arm motor, and wheel scrubber

Softgloss VFD• Input: 1HP, 9 amps, 200-240V, 3 phase

• Output: 2HP, 7 amps, 3 phase

• Frequency range: 0.1-400Hz

VFD Circuit Breaker• 3 Pole

• Mini or miget fuse

• 15 amp


20002650 Contactor 100-C09 24VAC 1HP 3-Pole $118.50

Motor Contactor• 25 max amps

• 3 pole

• 24V AC coil

• Aux contactor

• Used on gantry drive, front/rear arm motor, and wheel scrubber

1-DAY SHIPPING

2-DAY SHIPPING

3-DAY SHIPPING

The CarWash™

SupplierTM

Shipping Same Price as Ground!

3-DayRight Parts. Right Price. Right Now.

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



www.SonnysDirect.com SoftGloss Electrical Parts


10005590 15625-002 Keypad, Entry 8-Conductor & 8-Pin $62.50


10007173 Transformer 24VAC C0200E1B KVA 2.00 $202.50


10003074 Socket, SH2B-05 Base for 8-Blade Relay $7.07


10002807 Socket Base SY2S-05 for 8-Blade Relay $5.69


10005066 10391-001 Switch, Mercury 17ft Leadwire Lgth Ryko $27.00


10003510 Relay, Omron 8-Blade 24VAC 3/4in Thick $9.95


10003543 Relay, IDEC 8-Blade 1/2in Thick 24VAC $9.76


10005409 Switch, Pushbutton 1NC Push/Pull 40mm $38.37

Relay BaseUsed with 10003543

E-Stop Push Switch• NC contact

• 22mm

Mercury Switch• 17ft lead

• 240VAC

• Maximum differential angle 10°

Key Pad• Standard and multi

• Upgrade coin box

8 Blade Relay • 24VAC

• Rated 10 amps

Power Supply / Transformer• KVA: 2.00

• Weight: 1.70 lbs.

• Primary Voltage: 120 x 240V

• Secondary Voltage: 24V

• 50-60Hz, 200 VA rating

• Size: 4 1/2in W x 4in D x 3 13/16in H

• Nema ST-1

8 Blade Relay • 24VAC

• Rated 8 amps

Relay BaseUsed with 10003510

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S


Ryko® Reclaim Parts


10008727 Sand Separator ILB-100 1in MPT 19-32GPM $787.50


10006716 Parker Valve Sol 1in N/C D1D1B2-24VAC $80.09

10005255 Parker Valve 7KB02 Diaphragm Repair Kit 36.13


10008617 10203-206 StaRite, JHG3-52H 57GPM 2HP 230/460V (Complete)

$652.19

10007949 - StaRite, AP100GL Motor 2HP 230/460V 3Ph (Motor only)

296.59


10005834 Hubbell 69WB5 Pressure Switch 30-50PSI $67.99


20002650 Contactor 100-C09 24VAC 1HP 3-Pole $118.50


10002780 Adapter 32-025 1in MPT x 1in Barb $6.87

Sand / Cyclon Separator• 1in inlet & outlet

• 19 - 32GPM

• 150PSI max pressure

• Ideally suited for small system applications, side-stream installations and individual equipment protection

• Removes sand, grit and other fine solids from source of process water/liquid systems, removing 98% of such particles 200 mesh (74 microns) and larger

Reclaim Pressure Switch• Cut in 30PSI

• Cut out 50PSI

• 24-220V rating

• Switches combine the functions of a standard pressure switch with protection against low pressure

• It prevents the pump from starting whenever the system falls below cut-in pressure


10007611 Motor Overload Protector 140M-C2E-C10 $208.25


10007026 Campbell 4105E Foot Valve 2in Bronze $126.59

Reclaim Pump Overload• 6.3 - 10 amps

• 3 pole

• Aux contactor

2in Foot Valve• Positive-action foot valve for use with cold water

• No. 6 perforated strainer

• 1-pc cast-bronze poppets – equipped with corrosive resistant stainless steel spring & Buna-N seal

• Maximum 200PSI

Reclaim Pump Contactor• 25 max amps

• 3 pole

• 24V AC coil

• Aux contactor

1in Hose Barb1in NPT x 1in Barb

Normally Closed for Water Only with Din Coil• Two-way piloted valves, 7000 series

• Brass body, buna seals, and DIN plug coil

• Maximum temp 185°F, all are 2-150PSI

• Water valves only and should not be used for compressed air or gases.

• Din female connector included

JB Series End-Suction Centrifugal Booster PumpFor boosting city water supply pressure

• Medium head model - Delivers upto 110’ of head with capacities to 140GPM

• 2in inlet, 1-1/2in outlet

• Voltage 230/460v 3 phase

• Maximum temperature 225°F

• Buna N mechanical shaft seal,cast iron body with silicon bronze impeller construction

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



www.SonnysDirect.com Blower Parts


10002978 - Rod End Bearing Female 5/16in no/Zerk $9.28


10005470 14786-004 Cylinder Ryko 1-1/16in Bore x 1.75in Stk $40.93


10009646 20083-101 Ryko Louver Left Weldment 20083-101 $49.78


10008544 14402-010 Weg Motor 10HP 1800RPM 215T ODP $649.59

Oscillator Air Cylinder• 1-1/16in bore

• 1-3/4in stroke


• 1/8in NPT ports

• Polished stainless steel tube with aluminum end caps

Rod End Bearring for Oscillator Air Cylinder5/16in female

Louver Left Weldment• Dryer oscilator

• For Voyager II

• SoftGloss


10003772 SMC AS2201F-N0107SA Flow 1/8" M x 1/4" T $11.15


10009645 20083-100 Ryko Louver Right Weldment 20083-100 $49.78


10004007 SMC AS2200-N01-S Flow 1/8" MPT x 1/8" F $13.23

Flow Control Tube Valve• 1/4in MPT x 1/8in Tube

• Push lock

• Controls the extension and retraction of your air cylinder that regulates air flow

• Adjustable air flow dial with lock nut

Louver Right Weldment• Dryer oscilator

• For Voyager II

• SoftGloss

Flow Control Needle Valve• 1/4in MPT x 1/8in

• Controls the extension and retraction of your air cylinder that regulates air flow

• Adjustable air flow dial with lock nut


10001293 Elbow N4ME4 1/4in Tube x 1/4in MPT $1.38

Male Elbow• 1/4in x 1/4in NPT

• Plastic

Weg Motor 10HP• 10HP • 208-230/460V

• 1800RPM • Full load amps: 27.0-24.4/12.2 A

• 3 Phase • 215T Frame

• 60Hz • ODP

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S


10004089

Right to Left Air Flow

Air Manifold Parts


10007225 SMC AC40-N04E-Z FRL Modular 1/2in FPT $118.64

1/2in Modular FRL*• 40 series filter / regulator / lubricator with embedded gauge

• 1/2in NPT ports

• 23° to 140°F (with no freezing)

• Filter element: 5 micron

• Push drain polycarbonate bowl with bowl guard

* Filter, Regulator, Lubricator. Includes mounting brackets.

Left to RightAir Flow


10004089 SMC AR20K-N02E-Z 1/4in Regulator w/Gauge $20.99

Mini Regulator• 20 series regulator with gauge

• 1/4in NPT ports

• 0 to 145PSI operating pressure range

• 23° to 140°F (with no freezing)

• Low profile embedded gauge

• Available in right to left or left to right air flow

Quick Exhaust Valve• Quick exhaust valves are used to quickly

vent exhaust air at the cylinder ports rather than porting the exhaust all the way back through the valve. They are often used to speed up cylinder operation.

• Pressure range 7 to 150PSI

• Port size 1/4in NPT


10004239 SMC AQ2000-N02 Exhaust Valve 1/4in FPT $16.00


10005245 Mac, Val 35A-B00-DACF-1BA 3Way 24VAC $32.19


10005138 Mac, Val 35A-AAA-DACF-1BA 3Way 24VAC $31.42


10005645 Mac, Val 45A-L00-DACF-BA 3Way 24VAC Base $39.49

35 Series Manifold 3-Way Pneumatic Solenoid ValveThe MAC 35 series is a direct solenoid operated 3-way poppet valve. It features a short stroke solenoid, a balanced poppet and powerful return spring. The valve can be configured as a 3-way or 2-way - normally closed or normally open or can be used for vacuum, divertor or selector applications.

• Used on RYKO® Wheel Scrubber

• 24V DC (5.4w)

• 36in lead. Connection: Grommet

35 Series Solenoid 3-Way Pneumatic In-line Valve• Used on RYKO® Trifoam

• 24V DC (5.4w) with 1/8in FPT

• 36in lead

• Connection: Grommet

45 Series 3-Way Pneumatic Solenoid ValveThe MAC 45 series is a direct solenoid-operated, 4-way poppet valve. It features a short stroke solenoid, a balanced poppet and conical seats. These features translate into high shifting forces, fast, consistent response times, and long life.

• Used on RYKO® Blower Oscillator

• 24V DC (5.4w) base mount body

• 36in lead

• Connection: Grommet


10004566 Mac, Val 35A-00M Regulator Manifold $19.50

35 Series Manifold Sandwich Regulator• Regulates pressure

• Used on 35 series

• For use on base models only

• With adjustable locking knob

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



www.SonnysDirect.com Chemical Distribution & Bay Switches


10002492 Ceramic Weight, Inside Hose 1/2in 250006 $3.92


10003359 Hydro, Foot Valve Blue Viton No Weight $8.85


10007057 10203-206 Parker Valve Sol 1/4in 04F304C01 C24VAC $143.33


10007694 Tape Switch 10in x 32in L Blue 20Ft Lead $198.90

20002800 Ryko Treadle, Frame 37in x 30in 253.45


10007933 Blue White C15N404X040V70 115V 10.6/OZMi $287.69

Viton Foot Valve• Viton

• Fits 3/8in & 1/2in hose size

• Blue foot valve 10003359, VITON, for use with whitewalls, butyl and alkali

3-Way Routing Valve• Detergent routing

• 24V AC

• 100PSI

• 1/4in NPT

Chem-Feed® Metering Pump C-1500N• 10.6oz per minute

• Features stylish, weather-resistant housing of black Valox

• Viton O-ring seals, ceramic ball checks and hastelloy C-valve springs

• Easy-to-adjust feed control allows operator to determine exact amount of chemical to be injected

Non-Liquid FilledPressure Gauges 1/4in Rear Mount• Non-liquid filled

• 2in diameter

• Steel case


10001960 Gauge, 0-100 1/4in Rear Mount $2.79


10006556 SMC AMG250C-N02C Water Separator 1/4in $85.66

10002948 SMC AM-BM102 Bracket Assy for Separator 6.56

Water Separator• 1/4in NPT NC

• Auto drain

• Mounting bracket sold separately

• Next to air manifold

Double Wide Tape Switch• 32in x 10in

• Helps position the car in the bay

• 22ft lead


10004638 Blue White C-395N-6A Injection CK Valve $21.79


10004233 Blue White C-340A FootValve 1/4-3/8 Tube $16.49

Foot Valve•••••

Strainer includedCheck valveBody material: PVDFO-ring: Viton®

Tube Connection 1/4in and3/8in tubing

Injection Fitting Check Valve••

•

•

1/4in and 1/2in Male NPT Can trim the injection point (nose) if neededNose section designed to inject the chemical away from the wall of your pipe3/8in tube connection

Fits inside 1/2in tubing

Ceramic Weight (inside tubing)

2000280010007694

10002948

10006556

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S


Hubs and Shafts


20010395 Shaft, Ryko Adapter to C-Channel Unihub $99.00

20010258 Unihub, Aluminum Retaining Plate 9.45

Ryko C-Channel AdapterAllows Ryko hubs to attach to SONNY'S Shaft or SONNY'S Hubs to Ryko Shafts.

20010395

20010258

Sonny's # Description Needed Price

20004531 Bushing Hub Tube 109249 Insert 1 $69.72

10000514 Socket Cap 3/8-16 x 1-1/4in 37C125KCSS 4 1.69

10003066 Washer, Split Lock 3/8in 37NLOCS SS 4 0.15


20002371 Unihub C-Channel 37in Lgth x 6in Dia. $83.34

20002286 Shaft, Ryko SG 1.25in x 13in 21827-004 82.62

20004504 Unihub Plate Retainer for Cloth 13.48


20004682 Unihub C-Channel 70in Lgth x 6in Dia. $82.08

20004526 Shaft, Ryko SG 1.5in x 16in 21827-006 81.06

20004504 Unihub Plate Retainer for Cloth 13.48

Sonny's # Description Needed Price

10003670 Bushing P2X138 Bore 1-3/8in Taper Lock 1 $12.60

10005648 Bolt, Hex 3/8-16 x 1-1/4 SS 37C125HCSS 3 0.52

10003066 Washer, Split Lock 3/8in 37NLOCS SS 3 0.15

10006487 Key Stock 5/16 x 2in L Stl 31R200RKS0 1 1.95

Replacement Taper Lock for Hub

Front Brush 40in Replacement Hubs & Shaft

Rear Brush 70in Replacement Hubs & Shaft

Replacement Bushing for Hub

20004531

1000367010005648

10003066

1000648710003066

20002286(1 1/4in x 13in)

20004526(1 1/2in x 16in)

20004682(70in Hub)

70in

40in

20002371(40in Hub)

2000450420004504

10000514

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



www.SonnysDirect.com Replacement Cloth / Shafts / Hubs

Available colors

Available colors

Replacement Hush Series Neoglide® for 44in Front Brushes

Replacement Hush Series Neoglide® for 68in Rear Brushes

Replacement Uni Hub for Top Brush


20010442 Unihub C-Channel 66in Top Brush $206.05


10010336 NG Ryko 44in Front Brush Set 1,980.00


10010337 NG Ryko 68in Rear Brush Set 2,530.00


20005148 Shaft, Ryko SG TopBrush 1" x 4" 21827005 $71.92

66in

Replacement Neoglide®

Shaft For Top Brush• 1in Dia x 4in L

• Stress-proof steel

• Fits RYKO® hubs

• Fits SONNY'S hubs

Replacement for Ryko Top Brush55in Diameter x 66in

• Fully assembled on a 1 1/2in shaft

• Hush quiet with enhanced cleaning

SO

N

NY’S PREFERR

ED

Item # Description Price Per Hub

20007196 Top Brush, Tunnel Hush Brush Black $2,364.00

20007197 Top Brush, Tunnel Hush Brush Blue 2,364.00

20007198 Top Brush, Tunnel Hush Brush Red 2,364.00

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S


POS Replacement Parts


10010620 RDM3680 Mitsubishi PLC-FX2N-128

$742.50


10010617 RDM5084 PCB Assy Coin Box CPU Amtt

$448.50


10010621 RDM3688 Handheld Program-mer Core Only

$277.99


10010613 RDM5420 Code-A-Wash Touch Screen

$900.00


10010610 RDM3587 Console Code-A-Wash III

$705.00


10010618 RDM5164 Modem Node (Green Box)

$292.50


10010615 RDM4402 Amtt LCD Display $375.00


10010611 RDM3588 Code-A-Wash IV Console w/O Net

$900.00


10010619 RDM6123 Amtt KeyPad $270.00


10010616 RDM5083 PCB Assembly Amtt I/O

$262.50


10010612 RDM4806 Code-A-Wash IV Console w/Network

$900.00


10010614 RDM6674 Code-A-Wash IC PC $1,312.50

POS Console - Code-A-Wash III• Will communicate with non-network coin boxes

• Will generate codes and program wash

• 1 Year Warranty

• Core required

POS Console - Code-A-Wash Touch Screen Console• Will communicate with network coin boxes


• 1 Year Warranty

• Core required

AMTT Entry System • Customer Display

• LCD and Driver Board

• 1 Year Warranty

AMTT Entry System • I/O Board Assebly

• Bottom board of CPU - I/O Assembly

• 1 Year Warranty

• Core required

AMTT Entry System • CPU Board

• Top board of CPU - I/O Combo Assembly

• 1 Year Warranty

• Core required

AMTT Entry System • Customer Keypad - Code Entry

• Replaces RYKO OEM Keypad

• 1 Year Warranty

PLC Programmer• Mitsubishi FX-20P

• Handheld PLC Programmer

• 1 Year Warranty

• Core required

PLC• Mitsubishi FX2N-128MR • 1 Year Warranty

• 64 Inputs / 64 Outputs • Core required

PLC/Modem Interface Node (Green Node)• Interfaces Entry

System to PLC

• 1 Year Warranty

• Core required

POS Console - Code-A-Wash IV W/O Network Console• Will communicate with non- network coin boxes


• 1 Year Warranty

• Core required

POS Console - Code-A-Wash IV W/ Network Console• Will communicate with network coin boxes


• 1 Year Warranty

• Core required

POS Console - Code-A-Wash iC• Will communicate with network coin boxes


• 1 Year Warranty

• Core required

Ryko # 13699-001

Ryko # 21205-001 or 1189-054

Ryko # C-A-W-Touch

Ryko # 13700-012

Ryko # 20088-001Ryko # FX-20P

Ryko # FX2N-128

Ryko # 22437-010

Ryko # 13700-12

Ryko # 27209-902

Ryko # 15546-007

Ryko # 21205-001 or 11189-055

RE

PLA

CE

ME

NT F

OR R

YK

O®

SO

NN

Y'S



www.SonnysDirect.com

Notes:

1-DAY SHIPPING

2-DAY SHIPPING

3-DAY SHIPPING

The CarWash™

SupplierTM

Shipping Same Price as Ground!

3-DayRight Parts. Right Price. Right Now.

YOU CAN’T FAKE EXPERIENCE.

Since

1949WAS

HING CARS

SONNY’S remarkable financial stability is recognized by Dun & Bradstreet, the world’s leading source of commercial information and insight on businesses.

Decide With Confidence

The CarWash

SupplierTMThe CarWash

FactoryTM

SONNY’S site plans and mechanical drawings saved me time and money. Together we rapidly moved from conversation to execution. My express wash opportunity became an income

producing reality.

Dennis Ogan Owner Washwego Car Wash Westwego, LA

SONNY’S is The World’s Bestselling Conveyorized Car Wash Equipment, Designed and Built in the USA and in

Stock for Immediate Delivery.

Designed Here. Built Here. Backed Here.

On Friday afternoon at 4 o’clock when you call up and need something overnight — with SONNY’S you can get it!

Justin AlfordCo-Owner Benny’s Car Wash & Oil Change Baton Rouge, LA

SONNY’S CarWash Parts Offers 12,000 Parts Delivered In 3-Days Or Less For 12 OEM Equipment Brands

With Over $10 Million In Inventory.

Right Parts. Right Price.Right Now.

YOU CAN’T FAKE EXPERIENCE.

The Tunnel Experts TM

www.SonnysDirect.com

The CarWash

ManagerTM The CarWash

TrainerTM

SONNY’S CarWash Controls crew is the best. They help all customers with a courteous, professional attitude and are always available.

It is well worth it. Thanks again!

Jeff Ross President 9w Auto Wash Corp. Car Wash West Haverstraw, NY

SONNY’S CarWash Controls Provides Affordable Real-Time Management Systems to Increase Uptime,

Revenue, and Loyalty While Reducing Operating Costs.

Real-time Control. Real-time Reporting. Real-time Updates.

Matthew Miller Manager Let ‘Er Buck Car WashSheridan, WY

The instructor’s excitement, eagerness, and overall attitude greatly benefited my ability to not only want to improve my wash, but the car wash industry as a whole.

SONNY’S Carwash College Delivers Hands-On Car Wash Maintenance, Repair, & Management Training with

Resources to Help New Investors Succeed.

Real Operators. Real Training. Real Results.

5605 Hiatus Road Tamarac, Florida 33321U.S. Phone: 800 -327-8723 U.S. Fax 800-495-4049International Phone: 954-720-4100 International Fax: 954-724-4288

Buy online @ SonnysDirect.com

Learn How to• Build a Car Wash• Improve Wash Quality• Get More Customers• Reduce Expenses

Did you Know?SONNY’S Inventories over 12,000 car wash items to guarantee we can ship what you need when you need it

SONNY’S Manufactures and stocks replacement parts for 13 other OEM equipment brands in additition to SONNY’S Equipment

SONNY’S answers 97.3 of all customer service calls within three rings

Inventoried items ordered by 4pm E.S.T ship from SONNY’S warehouse the same day

3-Day ShippingSame Price as Ground!

1-DAY SHIPPING

2-DAY SHIPPING

3-DAY SHIPPING

SONNY’S remarkable financial stability is recognized by Dun & Bradstreet, the world’s leading source of commercial information and insight on businesses.

Decide With Confidence

Forward thinking professional car wash investors and owner/operators partner with Sonny’s because of our

leadership, reliability and expertise. Our education and software products support your profitability and our

conveyorized car wash innovations, parts, and supplies keep your business growing.

OurMission

#60010035

ryko repcat

Documents