rx10 - a new type of smartphone
TRANSCRIPT
-
8/6/2019 RX10 - A new type of smartphone
1/13
Top Side
Bottom Side
Front Face Right Side Back Face Left Side
Main Drawing (October 2006)
Model Name: RX10 Designer: Stuart Taylor
1. Dual Touch Screen
2. Phone Speaker
3. Slide-on Keypad
4. Charging & Communication Port
5. Grooves for External Devices
6. Digital Camera
7. Anchor Slot for External Devices
8. Stylus
9. Earphone Jack and Polyphonic Speaker
10. Microphone
3D View(Actual Colour)
Page 1 of 13
-
8/6/2019 RX10 - A new type of smartphone
2/13
Page 2 of 13
Table of Contents
1) Introduction
2) Primary Modes
a) Phone Mode
b) Computer Mode
3) Secondary Applications
a) Computer Applications
b) Media Players
c) Game Pads
4) External Attachments
a) Back Covers
b) Screen Attachment
c) External Devices
d) Laser Keyboard and Projector Attachment
5) Related Software Concepts
6) Components
7) Conclusion
-
8/6/2019 RX10 - A new type of smartphone
3/13
Page 3 of 13
Introduction
Vertical Position Horizontal Position
(One Hand Operation) (Two Hand Operation)
Basic Description
There are three novel factors that attribute to the RX10s wide range of uses. They are:
Shape & Size - The PDA is the length, width and depth of a moderately sized Candy
Bar Cell phone and is based on the dimension ratios of Sonys PSP. It can thereforebe comfortably held in a vertical or horizontal position allowing operation with one or
two hands respectively.
Screen Size - The entire front face of the PDA is solely dedicated to a High
Resolution Touch Screen thereby providing the maximum possible screen size for
interaction and viewing media. The majority of program interfaces will be directly
operated using the Touch Screen but buttons are located on the side of the PDA for
extended communicability. The Dual Touch feature allows the PDA to be operated
with one thumb or a stylus when held in a vertical position, or two thumbs when in a
horizontal position.
Adaptability - The PDAs capabilities can be enhanced according to user preference
by attaching external devices that seamlessly merge with the PDA via specially
shaped grooves, slots and communication ports.
With its unique combination of features the RX10 has the versatility to be used much
like a large range of mobile media and telecommunication products currently on the
market.
Dual Touch ScreenSide Keys (3 Buttons)
Phone Speaker
Grooves for
Slide-on Extensions
-
8/6/2019 RX10 - A new type of smartphone
4/13
Page 4 of 13
Primary Modes
Phone Mode Computer Mode
There are two Primary Modes in which the RX10 can operate. To switch between
them, one only needs to press a button on the Side Keypad.
Phone Mode
The RX10 can be used like a standard Candy Bar Cell Phone when held in a vertical
position. Any cell phone interface can be projected onto the Dual Touch Screen andbe operated as if the keys were built-in. The cell phone software can effortlessly
switch to other interfaces for using specific applications. For example, the RX10 can
automatically open a Word Processor for typing SMSs and Instant Messages. New
interactive cell phone interfaces can be designed simply using specialized software.
Computer Mode
The Desktop can be operated when held in both vertical and horizontal positions,
acting much like a PDA or Pocket PC respectively. The RX10 can work with a range
of applications that are generally accessed through the Desktop but can be opened in
the Phone Mode as well. Folders are opened in the standard windows format.Toolbars for applications are located on the side sections or can pop up by running a
thumb or stylus along certain areas of the screen (i.e. lower long edge). The RX10
will have text to speech, speech to text and speech translation capabilities.
Next Menu
Keys
Deactivated
Previous Menu Phone Mode
PC Mode
(Hold down) Turn On/Off
Cell Phone Interface
(Motorola SLRV L7)
Computer Desktop
with Standard Icons
Side Screen Items
Control Panel,etc
Time/CalendarDisplay
Minimize,
Maximize, etc
-
8/6/2019 RX10 - A new type of smartphone
5/13
Page 5 of 13
Secondary Applications
Word Processor
ReaderComputer Applications
The user can effortlessly switch between the Word Processor and Reader for basic
editing and viewing of documents. This principle applies to all applications. Many
other applications can be used with the RX10 including but not limited to: Microsoft
Office, Photoshop, Video Editor, Internet Explorer, Schedule/Organizer, Media
Players and Game Pads.
MP3 Player Video Player
Widescreen (16:9)
Media Players
The RX10 can project a range of MP3 player interfaces which include the Apple iPod,
Creative Zen and Sansa e260. DJ interfaces can be used when in a horizontal position
for on-the-go mixing of music.
Video media can utilize the entire screen area allowing for smooth, vivid video
playback. Videos can be viewed in Widescreen (16:9) or Standard (4:3) ratiosallowing for movie and television playback.
Menu
Keys
Deactivated
Play/Pause Desktop
DesktopMP3 Player Interface
(Apple iPod Mini)
Side Screen
Deactivated
Desktop
Desktop
Next SectionPrevious
Section
Shift, Cursor Right, Toolbar Menutrl, Cursor Left, Alt
Side Screen Items
Scroll, NextPage, etc...
Enable Keyboard
Zoom In/Out
Side Screen Items
Keyboard expandsonto the Side Screen
Disable Keyboard
-
8/6/2019 RX10 - A new type of smartphone
6/13
Page 6 of 13
Game Pads
Sony PSP Game Pad
(Tomb Raider)
Standard Game Pads
A range of gaming interfaces can be used on the RX10 including Sonys PSP or
Nintendos Game Boy. These Game Pads can be customized according to user
preference.
1st
Person Shooter Game Pad
(Medal of Honor)
Alternative Game Pads
Game Pads can adapt to the vast variety of game genres currently on the market. For
example, with the Game Pad shown above, all the Action Keys are transferred to the
side where they are easily controlled with the users index fingers. The majority of
directional controls are located on the Touch Screen, with one thumb being able to
control body movement and the other controlling head movement. There are many
other types of Game Pads.
Driving and Flying games require vertically sliding the thumbs in opposite directions
to steer the vehicle. Action Keys such as Accelerate and Brake would be located on
the on the side.
With Fighting Games strikes are performed by sliding your thumbs on the Touch
Screen and holding down various Side Keys. The user can simply switch betweenmovement and fighting Game Pads during play to create a novel gaming experience.
Action Keys
Aim Crosshair
Directional
Controls
Jump Secondary FireInventory FireCrouch
Special Items Menu
Weapons
Menu
Special Items Menu
Directional
Controls
1st
Person ViewMenuStrafe
-
8/6/2019 RX10 - A new type of smartphone
7/13
Page 7 of 13
External Attachments
Back Cover Front View Back Cover Rear View
(Alone) (Attached to the RX10)
Back Covers
Back Cover Extensions enhance the RX10s capabilities by providing various features
tailored for certain applications. The Extensions can be produced as complete units
with embedded features or can be built up by the user from simple base units (above).
This allows for various combinations of different features. Built-up units can consist
of 2, 3 or 4 Cartridges. The Back Covers can be applied or removed with the greatest
of ease and can be stacked upon one another. The RX10 registers what type of
attachments has been added via Communication Ports and automatically updates
applicable software to run in accordance with external features.
Features
There are a range of features that are generally located within the Cartridges but can
also be encompassed in the Middle Attachment or other types of attachments. These
features include among others: Supplementary battery, Storage memory, Processors,
Slots for external devices e.g. Memory sticks, Slide out Keyboard, Connection
expansions e.g. GPS and WiFi, and Extras such as LED lights.
An example of a Back Cover for gaming enhancement would be a complete unit with
built-in Processor/Graphics Accelerator, Battery, and Hard Drive or Slots for Memory
Sticks. If the user was taking a long trip and wanted to watch movies on the train, they
could attach a built-up unit consisting of 3 cartridges that would include a large
battery, small battery and Hard Drive or Slots for Memory Sticks.
Camera
Opening
nchor Clip
CartridgeRelease Switch
Slide-on
Rungs
Cartridge
Slot
Base Unit MiddleAttachment
Cartridge 2
Cartridge 1
Camera
Com Port
Connector
USB Port
-
8/6/2019 RX10 - A new type of smartphone
8/13
Page 8 of 13
Screen Attachment
Closed Open
The Screen is anchored to the RX10 via the Side Slot and/or Back Cover. When
closed, the RX10 can still be used as a cell phone thanks to a basic interface on the
back of the screen. Various Key Pad Cards, similar in size and thickness to standard
ATM cards can be slotted onto this interface. An extra screen enhances the
capabilities of the RX10 quite dramatically but can seriously drain power usage. For
this reason, the Screen Attachment will generally be used in conjunction with a Back
Cover.
With the extra Screen attached, the RX10 can be
operated like a mini laptop. For example, when
using a Word Processor or related program the
entire Screen of the RX10 can be dedicated to a
Keyboard (left). The Screen can tilt back by 180
degrees, allowing both screens to be used for
reading documents.
Word Processor
An extra Screen allows games to be played in
Widescreen using more spread out controls (right).
More types of gaming interfaces such as the
Nintendo DS can be used.
Game Pad
Slot-in Key Pad
Back Cover Unit
Standard High Res
LCD Screen
Phone SpeakerBasic Display
icrophone
Side Speakers
Side Keys
(7 Button) RX10
-
8/6/2019 RX10 - A new type of smartphone
9/13
Page 9 of 13
External Devices
Laptop (Closed) Laptop (Open)
Laptop - When attached, the RX10s inner circuitry is directly linked to the Laptops and acts as acomponent thereof. The Laptop can therefore be slimmer as the RX10 has many of the necessary
components that would normally add to its bulk.
Side Keypad Video Camera Wide Angle USB Camera
(7 Button)
Side Keypad - Keypad Cartridges can be slotted onto the side of the RX10. They link up with it via
a com port. However, the RX10 should perhaps have a permanent 7 Button Keypad built in.
Video Camera - The Video Camera slots into the same place the Side Keypad does. It could
possibly be attached to a Back Cover unit that has related features. This camera delivers superior
picture quality and has ample room for a zoom. Videos can be directly edited or viewed in a video
program straight after filming.
USB Camera - The camera allows for on the go VoIP conference calls and when turned the other
way, it can be used for taking wide angle pictures. It could perhaps be built into a Back Cover unit.
I have Ideas and Designs of many other types of External Devices. These include among others, a
front cover that will protect the Screen and has transparent buttons for user feedback. Game Padscan be attached around the RX10 so the entire screen can be used for a superior gaming experience.
Keyboard
RX10
Standard 14 inch
LCD Screen
Mouse Pad
Slot for RX10
-
8/6/2019 RX10 - A new type of smartphone
10/13
Laser Keyboard and Projector Attachment
Front View Rear View
Setup Sequence
1. With the RX10 attached, slidethe Support Casing outwards. 2. Remove the Clip-out Stand 3. Flip the switch on the Clip-out
from the back face. Stand and then place it on the
underside of the Support Casing.
4. The complete unit is then placed onto a table withthe projector facing an adjacent wall or side screen.
The RX10 should be placed between 30 and 60
centimeters from the wall. When turned on, the
RX10 measures the distance between the wall and
itself using a laser on the rear side. It then projects
a full sized screen onto the wall and a laser
keyboard onto the table top. The RX10 can then be
used like a standard PC.
A drawback to this concept is that dim light is
needed for the unit to operate correctly. The screen
will have to be projected in a trapezium shape that
tapers towards the top. This will compensate for
the screen being projected at an upwards angle.
Projector Lens
Camera
Opening
Clip-out Stand
Laser Keyboard
Slide-out
Support Casing
MicrophoneCom Port
Connector
Slide-on Rungs
Anchor
Clip
USB Port
Screen
Projection
Laser
Keyboard
Projection
-
8/6/2019 RX10 - A new type of smartphone
11/13
Page 11 of 13
Related Software Concepts
Interface Design Program
Due to Copyright and Design Protection Laws, replica software interfaces of current
products will not be able to be produced and distributed by the makers of the RX10. Away of getting around this is to include Interface Design Software with the RX10.
With this program, users can simply and easily design their own interfaces on their
PCs and share them with each other.
To start, the user chooses a picture (Motorola SLVR) and uses a pre-shaped cutting
tool to select the applicable area. They then select where the Active Screen Area
should be placed. Commands for certain applications can be dragged from a toolbar
onto the picture and be sized and shaped according to user preference. Commands and
Icons can be combined and then dragged onto the picture. Icons or groups of Icons
with pre-set commands can be downloaded and added to any picture such as a family
photo. After editing, the interface is saved and transferred to the RX10 for use. This
program can be used to create any type of interface, including Cell phones, MP3players and Game pads.
Key Expander Feature
The Keyboard on the Word Processor
application is fairly small which would
under normal circumstances result in
double types. By decreasing the
Activation Area of the keys (A), they
respond as if they were larger keys (B),
thereby preventing double types. This
principle can apply to all keys, including Icons and Game Controls.
Commands
Cell Phone
Numbers
12
3
4
Active Screen
Area Icons
(A) (B)
Activation Area Actual Key Size
-
8/6/2019 RX10 - A new type of smartphone
12/13
Page 12 of 13
Components
Body
The RX10 will have a solid build and because it is crammed with features it will be
relatively heavy for its size. The body of the final product will be streamlined with
rounded edges for a more comfortable grip (see Sony Mylo). There could perhaps be
an internal spirit level so that applications can immediately conform to the direction
the RX10 is held in. The processor speed should be more than adequate to flawlessly
play high quality videos and basic games. The battery is detachable and will provide
the RX10 with hours of power.
Dual Touch Screen
The technology to build the Dual Touch Screen is
currently available. The Wide Screen area is90mm x 50.6mm and the Standard Screen area is
67mm x 50.6mm. The Screen has a Glass/Plastic
exterior that resembles the glass casing of the
Apple iPod Nano. The phone speaker is located
behind the screen and sound is transmitted from
the speaker through a sealed off hole in the screen. The Side Screens may not be
necessary or should perhaps be replaced by touch pads. These touch pads would have
small buttons or directional markings for game play.
Earphone Jack and Polyphonic Speaker
A Standard Earphone Jack and Polyphonic Speaker are used with the RX10. The best
types of earphones are the ones that connect at right angles to the RX10.
Charging / Communication Port
The Communication Port is a very specialized component of the RX10. As well as
being able to charge the RX10, it is the link to the external devices. It must be able to
transfer large amounts of information and charge simultaneously. The measurements
are based on the iPod Nanos port.
Hole in ScreenGlass Covering
LCD Screen
Phone Speaker
CS through Screen
-
8/6/2019 RX10 - A new type of smartphone
13/13
Page 13 of 13
Conclusion
Apple iPhone Sony Mylo
All of the concepts and ideas presented in this report were conceived prior to the
release of either of these products. I conceptualized the basic parameters for the RX10
in August 2006 and by October, had finished complete 3D drawings of the Device
which are available upon request. I have been pleasantly surprised to see that many of
the aspects of the RX10 are present in these and other new products being released on
the market.
I feel that PDA technology has a lot more to offer than just being used for media and
telecommunication applications. With the Mobile PCs and Wireless technology that
we have today, a range of applications can be produced that benefit the user in waysnever before seen. I have many more Ideas and Designs of applications that can
revolutionize the way that we use mobile media devices. Medical applications can be
loaded onto the RX10 that communicate with wireless devices. These wireless
devices can be placed on various parts of the body and measure vital signs and related
aspects of the user night and day. Life style applications can automate mundane
chores and manage all aspects of a persons daily lifestyle. Language translators can
be loaded onto the RX10 and can instantly translate the users words into any
language, in a natural-sounding voice.
I have many more in-depth ideas and descriptions of the RX10 and related products
that I think your company and its partners would be interested in. I feel I have greatpotential and with further training and experience in a work-related environment, I
could become a valuable asset to your company and its vision.
Personal Details
Name: Stuart Taylor
Sex: Male Email Address: [email protected]
Date of Birth: 14 January 1983
Nationality: South African
Qualifications: Bachelor of Science Degree
in Biochemistry and Zoology