rw hydronic controls 92st / 92ss / 92spsize a b d h1 h2 h3 cv weight [in] [in] [in] [in] [in] [in]...

2
[181030] Drawings, photos and data are provided for information only and subject to change without notice. No part of this document may be reproduced, copied, modified or adapted, without the prior written consent of the copyright owner, unless otherwise indicated. © 2018 Red-White Valve Corp. All Rights Reserved redwhitevalvecorp.com pg1/2 92ST / 92SS / 92SP DZR Brass Full Port Combination Strainer DZR brass ball valve - wye strainer combination Blow-out proof stem Adjustable packing nut Full port Y pattern strainer Stainless steel strainer (20 mesh) Blow down valve with ¾” hose end 1 installed test point 1 additional tapped ¼” port Available in: Fig. 92ST - FNPT end (ASME B1.20.1 - NPT) with union end FNPT tailpiece standard, MNPT, Solder and Press tailpiece options available Fig. 92SS - Solder end (ASME B16.22) with union end Solder tailpiece standard, FNPT, MNPT, and Press tailpiece options available Fig. 92SP - Press end with union end Press tailpiece standard, FNPT, MNPT, and Solder tailpiece options available 400WOG @ 160°F Working conditions: Water: from 15°F to 260°F below 32°F only for water with added antifreezing fluids over 212°F only for water with added anti-boiling fluids Part Material Specification 1 Body DZR Brass UNS C35330 2 Fixed-end DZR Brass UNS C35330 3 Ball DZR Brass/Cr plated UNS C35330 4 Seat PTFE - 5 Stem DZR Brass UNS C35330 6 O-ring EPDM Perox NSF approved 7 Packing ring PTFE - 8 Packing nut Brass ASTM B124 C37700 9 Handle Steel / Dc plated ASTM A36 10 Nut Steel / Zn plated ASTM A36 11 Plug ¼” DZR Brass UNS C35330 12 Pressure tap DZR Brass UNS C35330 13 O-ring EPDM Perox - 14 Union DZR Brass UNS C35330 15 Union nut Brass ASTM B124 C37700 16 Ball valve DZR Brass UNS C35330 17 Cap DZR Brass UNS C35330 18 Gasket PTFE - 19 Strainer Stainless steel AISI 304 For Fig. 92SP For Fig. 92SS For Fig. 92SS For Fig. 92SP 1 19 2 17 6 7 18 4 11 3 5 8 16 12 14 10 13 9 15 RWV Hydronic Controls Material Feature

Upload: others

Post on 20-Sep-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RW Hydronic Controls 92ST / 92SS / 92SPSize A B D H1 H2 H3 Cv Weight [in] [in] [in] [in] [in] [in] [lb] ½” 5.67 5.89 7.65 2.29 3.74 1.93 4.7 1.42 ¾” 6.10 6.09 7.76 2.40 3.74

[181030]Drawings, photos and data are provided for information only and subject to change without notice. No part of this document may be reproduced,

copied, modified or adapted, without the prior written consent of the copyright owner, unless otherwise indicated.© 2018 Red-White Valve Corp. All Rights Reservedredwhitevalvecorp.com

pg1/2

92ST / 92SS / 92SPDZR Brass Full Port Combination Strainer

DZR brass ball valve - wye strainer combinationBlow-out proof stemAdjustable packing nutFull portY pattern strainerStainless steel strainer (20 mesh)Blow down valve with ¾” hose end1 installed test point1 additional tapped ¼” port

Available in:Fig. 92ST - FNPT end (ASME B1.20.1 - NPT) with union end

FNPT tailpiece standard, MNPT, Solder and Press tailpiece options availableFig. 92SS - Solder end (ASME B16.22) with union end

Solder tailpiece standard, FNPT, MNPT, and Press tailpiece options available Fig. 92SP - Press end with union end

Press tailpiece standard, FNPT, MNPT, and Solder tailpiece options available

400WOG @ 160°F

Working conditions: Water: from 15°F to 260°F

below 32°F only for water with added antifreezing fluidsover 212°F only for water with added anti-boiling fluids

Part Material Specification1 Body DZR Brass UNS C353302 Fixed-end DZR Brass UNS C353303 Ball DZR Brass/Cr plated UNS C353304 Seat PTFE -5 Stem DZR Brass UNS C353306 O-ring EPDM Perox NSF approved7 Packing ring PTFE -8 Packing nut Brass ASTM B124 C377009 Handle Steel / Dc plated ASTM A36

10 Nut Steel / Zn plated ASTM A3611 Plug ¼” DZR Brass UNS C3533012 Pressure tap DZR Brass UNS C3533013 O-ring EPDM Perox -14 Union DZR Brass UNS C3533015 Union nut Brass ASTM B124 C3770016 Ball valve DZR Brass UNS C3533017 Cap DZR Brass UNS C3533018 Gasket PTFE -19 Strainer Stainless steel AISI 304

ForFig. 92SP

For Fig. 92SS

For Fig. 92SS

For Fig. 92SP

1

19

2

17

6

7

18

4

11

3

5

8

16

12

14

10

13

9

15

RWV Hydronic Controls

Material

Feature

Page 2: RW Hydronic Controls 92ST / 92SS / 92SPSize A B D H1 H2 H3 Cv Weight [in] [in] [in] [in] [in] [in] [lb] ½” 5.67 5.89 7.65 2.29 3.74 1.93 4.7 1.42 ¾” 6.10 6.09 7.76 2.40 3.74

[181030]Drawings, photos and data are provided for information only and subject to change without notice. No part of this document may be reproduced,

copied, modified or adapted, without the prior written consent of the copyright owner, unless otherwise indicated.© 2018 Red-White Valve Corp. All Rights Reservedredwhitevalvecorp.com

pg2/2

92ST / 92SS / 92SPDZR Brass Full Port Combination Strainer

Size A B D H1 H2 H3 Cv Weight[in] [in] [in] [in] [in] [in] [lb]

½” 4.82 5.17 7.33 2.29 3.74 1.93 4.7 1.58

¾” 5.13 5.17 7.52 2.40 3.74 2.07 9.5 1.71

1” 6.11 6.13 9.62 2.56 4.11 2.36 13.9 2.69

1¼” 7.33 6.60 10.64 2.68 4.06 2.60 22.2 3.73

1½” 9.11 6.98 12.89 2.80 4.39 2.87 36.2 6.03

2” 10.01 7.85 13.52 2.99 4.63 3.25 63.3 7.37

Size A B D H1 H2 H3 Cv Weight[in] [in] [in] [in] [in] [in] [lb]

½” 4.66 5.20 7.15 2.29 3.74 1.93 4.7 1.35

¾” 5.38 5.40 6.66 2.40 3.74 2.07 9.5 1.63

1” 6.60 6.39 9.85 2.56 4.11 2.35 13.9 2.38

1¼” 8.02 6.85 11.07 2.68 4.08 2.59 22.2 3.55

1½” 9.02 7.33 12.45 2.80 4.39 2.88 36.2 5.33

2” 10.43 8.46 13.33 2.99 4.63 3.25 63.3 6.76

Size A B D H1 H2 H3 Cv Weight[in] [in] [in] [in] [in] [in] [lb]

½” 5.67 5.89 7.65 2.29 3.74 1.93 4.7 1.42

¾” 6.10 6.09 7.76 2.40 3.74 2.07 9.5 1.74

1” 6.95 6.93 9.85 2.56 4.11 2.35 13.9 2.38

1¼” 8.43 7.34 11.19 2.68 4.09 2.59 22.2 3.56

1½” 9.92 7.84 12.84 2.80 4.39 2.88 36.2 5.81

2” 12.09 8.98 14.46 2.99 4.61 3.25 63.3 7.59

Dimension, Cv, Weight

(H2)

(H1)

(A)(D)

(L)

(H3)

(B)

92ST

92SS

92SP

(H2)

(H1)

(H3)

(A)(D)

(B)

(H2)

(H1)

(D)

(H3)

(B)

(A)

RWV Hydronic Controls