rs9113 usb half mini card - redpinesignals.com · the software architecture for the usb half mini...

Redpine Signals, Inc. Proprietary and Confidential

RS9113 USB Half Mini Card

Datasheet

Version 1.2

August 2018

Redpine Signals, Inc. 2107 N. First Street, #680

San Jose, CA95131. Tel: (408) 748-3385 Fax: (408) 705-2019

Email: [email protected]

Website: www.redpinesignals.com

mailto:[email protected]

http://www.redpinesignals.com/


RS9113 USB Half Mini Card Datasheet Version 1.2

Overview: The RS9113 USB Half Mini Cardis based on Redpine Signals’ RS9113 ultra-low-power Convergence SoC. It offers dual-band 1x1 802.11n, dual-mode Bluetooth 4.0 and ZigBee 802.15.4 in a single device over USB in a Mini PCIe Card form factor. It is a high performance, long rangeand ultra-low power device and includes a multi-threaded MAC processor called ThreadArch®, baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch, dual-band antenna, U.FL connectorand Quad-SPI flash. The software architecture for the USB Half Mini Card, n-Link®, realizes a host-based architecture where the necessary MAC and PHY layers are implemented in the device to support high-performance, long range WLAN, Bluetooth and ZigBee applications in a 32-bit host processor over USB interface.

Applications:

Smartphones, Tablets and e-Readers

VoWi-Fi phones

Smart meters and in-home displays

Industrial automation and telemetry

MP3 music and MP4 video players

Medical devices

Industrial monitoring and control

Home and building automation

Wireless Headset

Features:

WLAN: Compliant to single-spatial steam IEEE 802.11

a/b/g/n with dual band (2.4 and 5 GHz) support.

Support for 20MHz and 40MHz channel bandwidths.

Transmit power up to +18dBm with integrated PA.

Receive sensitivity of -97dBm.

Bluetooth: Compliant to dual-mode Bluetooth 4.0

Transmit power up to 15dBm (class-1) with integrated PA.

Receive sensitivity of -94 dBm.

ZigBee: Compliant to IEEE 802.15.4

Transmit power up to 15 dBm with integrated PA.

Receive sensitivity of -102 dBm.

ZigBee Pro stack embedded.

n-Link®: Seamless integration with 32-bit processors

over USB.

Host Drivers for Linux, Wind River Linux, Android and Windows

1

General: FCC, IC, ETSI/CE Certified

U.FL connector for external antenna connection is selectable.

Single supply of 3.0 to 3.6 V

Operating temperature range: -40oC to +85

oC

1Drivers for Linux,Wind River Linux and Android available now. Contact Redpine Signals Sales

([email protected]) for availability of drivers for Windows.




About this Document This document describes the RS9113 USB Half Mini Card’s specifications. The document covers the hardware and software features, package descriptions, pin descriptions, interface specifications, electrical characteristics, certification information and ordering information.

Disclaimer: The information in this document pertains to information related to Redpine Signals, Inc. products. This information is provided as a service to our customers, and may be used for information purposes only. Redpine assumes no liabilities or responsibilities for errors or omissions in this document. This document may be changed at any time at Redpine’s sole discretion without any prior notice to anyone. Redpine is not committed to updating this document in the future.

Copyright © 2015 Redpine Signals, Inc. All rights reserved.



Table of Contents

1 Overview .............................................................................................................. 6 1.1 Block Diagram ..........................................................................................................6 1.2 Product Naming and Variants ...................................................................................6

2 Features ............................................................................................................... 8

3 Package Description ........................................................................................... 13 3.1 Mechanical Characteristics ...................................................................................... 13 3.2 Half Mini Card Dimensions ...................................................................................... 13

4 Pinout and Pin Description .................................................................................. 14 4.1 Pinout of the RS9113 USB Half Mini Card ................................................................. 14 4.2 Pin Description ....................................................................................................... 15

5 Specifications ..................................................................................................... 17 5.1 Absolute Maximum Ratings .................................................................................... 17 5.2 Recommended Operating Conditions ...................................................................... 17 5.3 DC Characteristics – Digital I/O Signals .................................................................... 17 5.4 AC Characteristics ................................................................................................... 18

5.4.1 USB Interface ........................................................................................................................ 18 5.4.1.1 Timing Characteristics ....................................................................................................... 18 5.4.1.2 Electrical Characteristics ................................................................................................... 18 5.4.1.3 Voltage Thresholds ........................................................................................................... 18

5.4.2 Reset Timing ......................................................................................................................... 19 5.5 Regulatory Specifications ........................................................................................ 19

6 Software Architecture ......................................................................................... 20 6.1 n-Link® Software Architecture ................................................................................. 20

6.1.1 Operating System Support.................................................................................................... 21

7 Module marking and Ordering Information ......................................................... 22 7.1 Module Marking Information .................................................................................. 22 7.2 Collateral ................................................................................................................ 23 7.3 Packing Information ............................................................................................... 23 7.4 Contact Information ............................................................................................... 24

Table of Figures Figure 1: Block Diagram of RS9113 USB Half Mini Card ............................................................................ 6 Figure 2: RS9113 USB Half Mini Card Naming Convention ........................................................................ 7 Figure 3: Package Dimensions ................................................................................................................ 13 Figure 4: Reset Timing ............................................................................................................................ 19 Figure 5: n-Link® Software Architecture ................................................................................................. 20 Figure 6: Module Marking Information .................................................................................................. 22 Figure 7: Mechanical Details of Tray ...................................................................................................... 23

Table of Tables Table 1: RS9113 USB Half Mini Card Features ........................................................................................ 12 Table 2: Mechanical Dimensions ............................................................................................................ 13 Table 4: Pin Descriptions ........................................................................................................................ 16



Table 5: Absolute Maximum Ratings ...................................................................................................... 17 Table 6: Recommended Operating Conditions ....................................................................................... 17 Table 7: Input/Output DC Characteristics ............................................................................................... 18 Table 8: Timing Characteristics for USB Interface ................................................................................... 18 Table 9: Electrical Characteristics for USB Interface ............................................................................... 18 Table 10: Input/Output DC Characteristics ............................................................................................. 19 Table 11: Regulatory Certifications ........................................................................................................ 19



1 Overview

The RS9113 USB Half Mini Cards are multi-wireless Combo devices based on Redpine Signals’ RS9113 ultra-low-power Convergence SoC.

They offer dual-band 1x1 802.11n, dual-mode Bluetooth 4.0 and ZigBee 802.15.4 in a single device over USB in a Mini PCIe Card form factor. They are high-performance devices which realize azero-host architecture. The necessary MAC and PHY layers are implemented in the device to support WLAN, Bluetooth and ZigBee applications and they interface with 32-bit host processors over USB interface.

They include a multi-threaded MAC processor called ThreadArch®, baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch, dual-band antenna, U.FL connector and Quad-SPI flash.

1.1 Block Diagram

The following figure is the block diagram for the RS9113 USB Half Mini Card.

Figure 1: Block Diagram of RS9113 USB Half Mini Card

1.2 Product Naming and Variants

The figure below shows the naming convention for the USB Half Mini Card’s variants.



Figure 2: RS9113 USB Half Mini Card Naming Convention

NOTE:

1) The devices and the accompanying software/firmware support a maximum of two wireless protocols simultaneously.

For the full list of available variants, please see the section on Ordering Information.

RS9113 - N B Z - D 3 N

N

B

Z

= Wi-Fi

= Bluetooth

= ZigBee

Base Module Family



2 Features

The table below lists the features supported by the RS9113 USB Half Mini Card.

S.No. Feature Description

1. Wireless Protocols IEEE 802.11a, 802.11b, 802.11g, 802.11n

Bluetooth 4.0 (2.1+EDR, LE)

ZigBee 802.15.4

2. Operational Modes Supported2 Wi-Fi Access Point with support for upto 32 clients

Wi-Fi Client

Wi-Fi Access Point + Client

Wi-Fi Direct™

Wi-Fi Client + Bluetooth Classic (EDR v2.1)

Wi-Fi Client + Bluetooth Low Energy

Wi-Fi Client + ZigBee End Device

ZigBee Router3

ZigBee Coordinator3

3. WLAN Bandwidth 20 and 40 MHz

4. WLAN Data Rates 802.11b: 1, 2, 5.5, 11 Mbps

802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

802.11n: MCS0 to MCS7 with and without Short GI

5. WLAN Operating Frequency Range

2412 MHz – 2484 MHz

4910 MHz – 5825 MHz

6. WLAN Modulation OFDM with BPSK, QPSK, 16-QAM, and 64-QAM

802.11b with CCK and DSSS

7. WLAN Transmit Power 18 dBm

8. WLAN Receive Sensitivity -97 dBm

9. Bluetooth Data Rates 1, 2, 3 Mbps

10. Bluetooth Operating Frequency Range

2402 MHz - 2480 MHz

2For other co-existence modes not listed here, contact Redpine Signals Sales ([email protected])

for custom offerings. 3Supported in future software releases.





11. Bluetooth Channel Spacing BR, EDR – 1 MHz

LE – 2 MHz

12. Bluetooth Modulation GFSK, DQPSK, 8DPSK

13. Bluetooth Transmit Power 15 dBm (Class-1)

14. Bluetooth Receive Sensitivity -94 dBm

15. ZigBee Data Rate 250 kbps

16. ZigBee Operating Frequency Range

2405 MHz - 2480 MHz

17. ZigBee Modulation DSSS

18. ZigBee Transmit Power 15 dBm

19. ZigBee Receive Sensitivity -102 dBm

20. Deep Sleep Current Consumption

< 10 µA in disconnected state

< 30 µA in connected state

21. Host Interfaces USB 2.0

22. USB Host Interface Supports 480 Mbps High Speed (HS) mode and 12 Mbps Full Speed (FS) modes.

23. Software Architecture Architecture for Zero Host Load for Datapath. Refer to the Software Architecture section for more details.

24. Wireless Security Features WPA/WPA2 Personal

WPA/WPA2 Enterprise Security

WPS

25. Advanced Security Features4 PUF Based Security

AES 128/256-bit

RSA

SHA, SHA256

ECDH

26. Application throughputs5 Upto 90 Mbps UDP

4These features are not part of the standard firmware. Contact Redpine Signals Sales

([email protected]) for details.





Upto 70 Mbps TCP

27. Operating Temperature Range -40oC to +85

oC

28. Supply Voltages and Options Single 3.0 to 3.6V Supply

29. WLAN Features Dynamic selection of data rate depending on the channel statistics.

Hardware accelerators for WEP 64/128-bit, TKIP, AES and WPS

Support for WMM

Support for AMPDU Aggregation/De-aggregation and AMSDU De-aggregation

Support for IEEE 802.11d/e/I, 802.11j6, 802.11w/k/v/r/h

6

30. Bluetooth Features Supports Classic mode piconet with seven active slaves7.

Supports Low Energy mode with seven active slaves8.

Supports scatternet with two slave roles or one master role and one slave role while being visible

9.

Proprietary Mode to support 15 active slaves by using the “reserved” bit

6.

Bluetooth security features: Authentication, Pairing and Encryption.

Supports low power connection states such as hold, sniff and park modes with selectable sniff intervals

10.

Adaptive Frequency Hopping (AFH), Interlaced scanning, Quality of Service, Channel Quality Driven Data Rate

6.

Channel assessment algorithm provides fast and accurate determination of occupied channels for use in adaptive frequency hopping mode

6.

Proprietary FEC for DQPSK and 8-PSK modes.

Provides finer granularity of range vs. throughput control.

31. Bluetooth Profiles/Protocols All profiles are to be implemented in the Host.

5The throughputs mentioned here have been recorded in an ideal environment over USB. Throughputs

observed in other environments might differ based on the host interface speeds (e.g., SPI clock frequency, UART Baud Rate, etc.), wireless medium, physical obstacles, distance, etc. 6Supported in future software releases.

7Current software releases support one slave.

8Current software releases support three slaves.

9Supported in future software releases.

10Hold and Park supported in future software releases.




32. ZigBee Features MAC:

Supported modes: ZigBee Coordinator, Router11

, End device.

PHY features: Beacon12

, Non-Beacon, CCM Security, Promiscuous mode.

Power saving using End Device Sleep, network periodic sleep.

Supports CCM* Security levels 1-7.

Supports Active scan, channel selection, Association and Disassociation, Orphan scanning, and coordinator realignment.

Network Layer:

Network Discovery

Energy Detection Scan

Network Formation

Permit Joining

Network Join

Network Rejoin

Stochastic Addressing

Network Leave

Network Reset

Routing (Symmetric)

Address Conflict

PANID Conflict

Network Status Updates

Link Status Commands

Data Transmission (Unicast and Broadcast)

NIB Management

Many-to-one and source routing

Multicast relaying and route discovery

APS Layer:

APSDE Data primitives

APSME Group Services

APSME Binding Services

APSME Fragmentation Service

11

Coordinator and Router modes supported in future software releases. 12

Supported in future software releases.




Reliable Transport

Duplicate Rejection

APS Layer Security

ZDO/ZDP Layer:

Device Discovery

Service Discovery

Security Manager

Node Manager

Network Manager

Binding Manager

Group Manager

Startup Attributes Set

33. Power Save Modes13

Dynamic Clock Gating

Low Power (LP) Mode – Modem and RF Transceiver Powered off. Host Interface is active. Supported with all host interfaces.

34. Miscellaneous Features Automatic Firmware Checksum validation and upgrade at power-up

Table 1: RS9113 USB Half Mini Card Features

13

Refer to Technical Reference Manual for more details on how to use these modes. Refer to the GPIO section of the Pin Description table to understand the signal requirements for these modes.



3 Package Description

3.1 Mechanical Characteristics

Parameter Value (L X W X H) Units

Half Mini Card Dimensions 30 x 26.8 x 5.3514

mm

Tolerance ±0.1 mm

Table 2: Mechanical Dimensions

3.2 Half Mini Card Dimensions

Figure 3: Package Dimensions

14

The Height of the Half Mini Card includes the height of the components on the top and bottom and also the PCB thickness



4 Pinout and Pin Description

4.1 Pinout of the RS9113 USB Half Mini Card

Pin No. Pin Name Pin No. Pin Name

Top Side Bottom Side

1 WAKE_N 2 VDD_33

3 RESERVED 4 GND

5 RESERVED 6 VDD_15

7 CLKREQ# 8 RESERVED

9 GND 10 RESERVED

11 REFCLK_P 12 RESERVED

13 REFCLK_N 14 RESERVED

15 GND 16 RESERVED

Mechanical Key

17 RESERVED 18 GND

19 RESERVED 20 RESERVED

21 GND 22 PERST_N

23 PERn0 24 AUX_VDD_33

25 PERp0 26 GND

27 GND 28 VDD_15

29 GND 30 SMB_CLK

31 PETn0 32 SMB_DATA

33 PETp0 34 GND

35 GND 36 USB_DN

37 RESERVED 38 USB_DP

39 RESERVED 40 GND

41 RESERVED 42 LED_WWAN_N

43 RESERVED 44 LED_WLAN_N

45 RESERVED 46 LED_WPAN_N



Pin No. Pin Name Pin No. Pin Name

Top Side Bottom Side

47 RESERVED 48 VDD_15

49 RESERVED 50 GND

51 RESERVED 52 VDD_33

Table 3: Pinout of the USB Half Mini Card

4.2 Pin Description

This section describes the pins of the RS9113 USB Half Mini Card.

S.No. Pin Name Pin No. Direction Description

Control Interface

1. PERST_N 22 Input Active Low Reset signal.

USB Interface

2. USB_DN 36 Inout Negative Data Channel for USB.

3. USB_DP 38 Inout Positive Data Channel for USB.

Power and Ground Interface

4. VDD_33 2, 52 Input 3.3V Power Supply

5. AUX_VDD_33 24 Input 3.3V Power Supply

6. GND 4, 9, 15, 18, 21, 26, 27, 29, 34, 35, 40, 50

Ground Common Ground

Miscellaneous

7. WAKE_N 1 Output This signal is presently unused and connected to a pull-up resistor.

8. VDD_15 6, 28, 48 Input This signal is presently unused and left unconnected.

9. CLKREQ_N 7 Output This signal is presently unused and connected to a pull-up resistor.

10. REFCLK_P 11 Input This signal is presently unused and left unconnected.



S.No. Pin Name Pin No. Direction Description

11. REFCLK_N 13 Input This signal is presently unused and left unconnected.

12. PERn0 23 Input This signal is presently unused and left unconnected.

13. PERp0 25 Input This signal is presently unused and left unconnected.

14. PETn0 31 Output This signal is presently unused and left unconnected.

15. PETp0 33 Output This signal is presently unused and left unconnected.

16. SMB_CLK 30 Input This signal is presently unused and left unconnected.

17. SMB_DATA 32 Inout This signal is presently unused and left unconnected.

18. LED_WWAN_N 42 Output This signal is presently unused and left unconnected.

19. LED_WLAN_N 44 Output This signal is presently unused and left unconnected.

20. LED_WPAN_N 46 Output This signal is presently unused and left unconnected.

21. RESERVED 3, 5, 8, 10, 12, 14, 16, 17, 19, 20, 37, 39, 41, 43, 45, 47, 49, 51

Inout Reserved. Leave unconnected.

Table 4: Pin Descriptions



5 Specifications

5.1 Absolute Maximum Ratings

Absolute maximum ratings in the table given below are the values beyond which the device could be damaged. Functional operation at these conditions or beyond these conditions is not guaranteed.

Parameter Symbol Value Units

Input supply voltages VDD_33, AUX_VDD_33

3.6 V

Storage temperature Tstore -65 to 150

C

Operating temperature range Top -40 to 85

C

Electrostatic discharge tolerance (HBM) ESDHBM 2000 V

Electrostatic discharge tolerance (CDM) ESDCDM 500 V

Electrostatic discharge tolerance (MM) ESDMM 60 V

Maximum Current consumption in TX mode Imax 500 mA

Table 5: Absolute Maximum Ratings

5.2 Recommended Operating Conditions

Parameter Symbol Min. Typ. Max. Units

Input supply voltages VDD_33, AUX_VDD_33

3.0 3.3 3.6 V

Ambient Temperature Ta -40 25 85 oC

Table 6: Recommended Operating Conditions

5.3 DC Characteristics – Digital I/O Signals

Parameter Min. Typ. Max. Units

Input high voltage 2 - 3.6 V

Input low voltage -0.3 - 0.8 V

Output low voltage - - 0.4 V

Output high voltage 2.4 - - V

Input leakage current (at 3.3V or 0V) - - ±10 µA




Tristate output leakage current (at 3.3V or 0V - - ±10 µA

Table 7: Input/Output DC Characteristics

5.4 AC Characteristics

5.4.1 USB Interface

5.4.1.1 Timing Characteristics

Parameter Conditions Min. Typ. Max. Units

trise 1.5 Mbps

12 Mbps

480 Mbps

75

4

0.5

-

-

-

300

20

-

ns

tfall 1.5 Mbps

12 Mbps

480 Mbps

75

4

0.5

-

-

-

300

20

-

ns

Jitter 1.5 Mbps

12 Mbps

480 Mbps

-

-

-

-

-

-

10

1

0.2

ns

Table 8: Timing Characteristics for USB Interface

5.4.1.2 Electrical Characteristics

Parameter Conditions Min. Typ. Max. Units

Vcm DC (DC level measured at receiver connector)

HS Mode

LS/FS Mode

-0.05

0.8

-

-

0.5

2.5

V

Crossover Voltages LS Mode

FS Mode

1.3

1.3

-

-

2

2

V

Power supply ripple noise (Analog 3.3V)

< 160 MHz -50 - 50 mV

Table 9: Electrical Characteristics for USB Interface

5.4.1.3 Voltage Thresholds


A-Device Session Valid 0.8 1.4 2.0 V

B-Device Session Valid 0.8 1.4 4.0 V




B-Device Session End 0.2 0.45 0.8 V

Table 10: Input/Output DC Characteristics

5.4.2 Reset Timing

The figure below shows the requirement for the Reset assertion time during power up and during operation.

Figure 4: Reset Timing

5.5 Regulatory Specifications

The RS9113 USB Half Mini Card includes the Dual Band RS9113DB module from Redpine Signals which has undergone modular certification for FCC, IC,TELEC and CE/ETSI. Note that any changes to the module’s configuration including (but not limited to) the programming values of the RF Transceiver and Baseband can cause the performance to change beyond the scope of the certification. These changes, if made, may result in the module having to be certified afresh.

The table below lists the details of the regulatory certifications. The certification for geographies not listed in the table is in progress.

Regulatory Certification Grantee Code Product Code Description

FCC XF6 RS9113DB Dual-band Module

IC 8407A RS9113DB Dual-band Module

TELEC 005-101228 RS9113DB Dual-band Module

Table 11: Regulatory Certifications

NOTE: Click on the links below for details on product variants and ordering information:

1) Product Variants

2) Ordering Information



6 Software Architecture

6.1 n-Link® Software Architecture

The n-Link® Software Architecture is a host based architecture with OS providing the core functionality support for Wi-Fi, Bluetooth and ZigBee features and having zero load in the data path. The kernel layer interfaces with the host driver to provide functionality for different wireless modules.

The figure below illustrates the software architecture of the n-Link® Software Architecture with WLAN, Bluetooth and ZigBee.

Figure 5: n-Link®Software Architecture



6.1.1 Operating System Support

The n-Link drivers for the RS9113 USB Half Mini Card are presently available for the following OS’:

1) Linux OS (kernel versions 2.6.30 to 3.16)

2) Wind River Linux (kernel version 3.4.91)

3) Android 4.4.3

Operating Systems to be supported in the future include WCE2013 and WCE7.



7 Module marking and Ordering Information

7.1 Module Marking Information

The figure below illustrates the marking on the modules.

Figure 6: Module Marking Information

The table below explains the marking on the modules.

Marking Description

RS9113 Model Numbers for the modules

RS9113-NBZ-D3N Software/Firmware supported . Refer to Product Naming and Variants for more information.

XF6-RS9113DB FCC Grant ID for Dual-band modules.

8407A-RS9113DB IC Grant IDs for Dual-band modules.

005-101228 Japan Type Approval Certificate Number for Dual-band modules

ABC-WWYY

ABC-WWYY-N

Lot Code Information:

ABC – Internal usage

WW – Week of manufacture

YY – Year of manufacture

N - Alternate Flash devices have been added due to the EOL of original Flash device

FCC Compliance Mark

CE Compliance Mark

TELEC Compliance Mark

Table 12: Module Marking Information



The RS9113 USB Half Mini Card has the following variants.

Part # Wi-Fi

2.4GHz Wi-Fi 5GHz BT ZB

Integrated Antenna

&U.FL SW Variant

RS9113-NBZ-D3N Y Y Y Y Y n-Link®

Table 13: RS9113 USB Half Mini Card Variants

7.2 Collateral

The following documentation and software are available along with the RS9113 USB Half Mini Card.

Datasheet

Device drivers

Technical Reference Manual

7.3 Packing Information

The Half Mini Cards are packaged and shipped in Trays.

Each tray can accommodate 32 cards. The mechanical details of the tray are given in the figure below.

Figure 7: Mechanical Details of Tray



7.4 Contact Information

For additional information, please contact Sales at Redpine Signals, Inc.

Redpine Signals, Inc.

2107 North First Street, Suite 540,

San Jose, CA 95131 USA

Phone: +1 408 748 3385

E-mail: [email protected]

Website: http://www.redpinesignals.com/

*****


http://www.redpinesignals.com/



Revision History

Revision No.

Version No.

Date Changes

1. 1.0 June 2015 Initial Version

2. 1.1 June 2015 1) Added Packing Information in Section 7.2.

2) Updated the Product Variants and Part Numbering sections.

3. 1.2 August 2018 1) Updated Tray information and mechanical drawing.

2) Updated module marking information and regulatory specifications to reflect TELEC certification.

3) Updated module image to reflect TELEC certification.

rs9113 usb half mini card - redpinesignals.com · the software architecture for the usb half mini...

Documents