rothoblaas structural renovation en 01

8/13/2019 Rothoblaas Structural Renovation en 01

1/8

steinhauser.bz

|1300209-05

|06-13

STRUCTURAL RENOVATION


2/8

VGZVGZ7xxx / VGZ9xxx

FULLY THREADED SCREW WITH C YLINDRICAL HEAD

Through the use of a timber slab placed above the existing beam, a structural reinforcement which mixes lightness and

material compatibility is realized. Thanks to this dry-fixing, the system is lightly invasive and totally reversible.

PRODUCT DESCRIPTION

The self tapping screw VGZ, thanks

to the thread running along the full

length and through a cross placed

installation with X configuration,

provides an high level of perfor-

mance as regard resistance and

stiffness. In particular, stiffness is

the most important feature to be

reached in order to guarantee the

best efficiency for the reinforce-

ment.

Concealed, strong and stiffconnection

High resistances with few

screws

Cylindrical head for a

concealed penetration

System tested and studied

in collaboration with Trento

University

Ask for your calculation advice

to Rothoengineer

VGZ WOODWOOD

CALCULATION SOFTWARE VGZ

Art. code

CONSTRUCTIVE SOLUTION:


3/8

VBCS100xxx

CONNECTOR FOR COMPOSITE WOODCONCRETE FLOOR

Through the use of a concrete slab placed above the existing beam, a structural reinforcement which provides high

resistance and stiffness in both direction of the floor is realized. This system provides also high acoustic performance.

PRODUCT DESCRIPTION

The connectors VB, thanks to the

ring stopper and through a cross

placed installation with a 45 incli-

nation along the beam in a X con-

figuration, provide a very fast and

precise assembling without the

interruption of the planking. The

small diameter and the dry-fixing

enhance the system to be lightly in-

vasive and well enough reversible.

Quick dry-fixing by a standardscrewdriver

Lightly invasive and reversible

self-tapping system

Limited spill thanks to the ring

stopper

Installation with a continuing

planking

Software of calculation online

for easy design

VB WOODCONCRETE

CALCULATION SOFTWARE VB

Art. code



4/8

SILENT FLOORDZ400412

DZ45010050

DZ100150/DZ100200

Developed for be installed within acoustic finishing systems; intended especially for restoration works with

VB fasteners thanks to its bituminous matrix which seals hermetically the hole of connector.

PRODUCT DESCRIPTION

Bitumen/syntheticneedle- punched

soundproof membrane. Guarantees

excellent mechanical characteris-

tics, puncture-proof, protection of

underlying floor even during open

building site phase.

High mechanical strength

double-layer, 6 mm thick

High resilience for floating floor

insulation

The use of its specific self-adhesive

strip is recommended

Perfect water seal due to correct

taping

Needle-punching on the under-

side keeps the product in the

original installation position

SOUNDPROOFING

ADDITIONAL PRODUCT BLACK BAND

Art. codeSOUNDPROOFING AGAINST FOOTSTEP NOISE

Art. code

Art. code

ADDITIONAL PRODUCT SILENT EDGE



5/8

VGZ7xxx / VGZ9xxx

DZ564275

VGZ

BEAM PROTECT

The reinforcement of timber beams can be realized throughthe fixation of another timber beam placed laterally on the

side and conveniently jointed. Thanks to the dry-fixing, this

system is lightly invasive and totally reversible.

Waterproofing polypropylene membrane which protects

timber beams head against damp, water damage or wa-

ter rising from concrete. Additionally, the high breathable

value of the membrane enhance the humidity dispersal.

Cylindrical head for a concealed penetration

To be used with Flexi Band for a perfect sealing of

details

High resistances with few screws

High breathable waterproofing polypropilenmembrane (h= 27,5 cm)

VGZ FLANKED BEAMS

BEAMS HEAD PROTECTION

Art. code

Art. code

FULLY THREADED SCREW WITH CYLINDRICAL HEAD

PROTECTIVE BREATHABLE SYNTHETIC MEMBRANE




6/8

XEPOX

XP400150

TWOPART EPOXY ADHESIVE

The end part of a timber beam which is directly inserted in the wall is often subjected to durability problems. In extre-

me cases it is necessary the replacement of the damaged part through a timber prosthetis realized with new wood.

PRODUCT DESCRIPTION

The connection between the exi-

sting beam and the replaced new

part is realized with metal elements

and epoxy resin conveniently desi-

gned in order to transfer the stres-

ses. The connection can be realized

with steel rods placed laterally or

with inner steel plates with grip-

ping capacity.

100% Epoxy adhesive

Excellent fluidness, wetting properties and adhesiveness

Different densities and sizes for multiple applications

Volume inalterability and reliability over time

Sold by volume

XEPOX PROSTHETIS

Art. code



7/8

XP400100

XEPOX

The end part of a timber beam which is directly inserted in the wall is often subjected to durability problems. In many

cases it is possible to reconstruct the wood material through steel rods and epoxy resins mixed with other material.

PRODUCT DESCRIPTION

The material reconstruction of the

wood is realized through epoxy

adhesive often mixed, for big

thickness/volumes, with gravel or

sand conveniently worked; also pie-

ces of wood can be used in order

to fill the space. According to the

specific application, also steel rods

conveniently shaped can be used.

100% Epoxy adhesive

Excellent fluidness, wetting properties and adhesiveness

Different densities and sizes for multiple applications

Volume inalterability and reliability over time

Sold by volume

XEPOX MATERIAL RECONSTRUCTION

TWOPART EPOXY ADHESIVE Art. code



8/8

XP400060/XP400080

XEPOX

The reinforcement of timber beams can be realized throu-

gh the fixation of a steel-reinforced wood board placed

on the strained side of the beam. The wood board is fixed

with epoxy adhesive and its efficiency is due to the steel

rods.

Excellent fluidness, wetting properties and

adhesiveness

Excellent adhesion between steel rod and wood

TWOPART EPOXY ADHESIVE

03RIABEN COD

8

054247

473136

TWOPART EPOXY ADHESIVE Art. code

TIMBER STRUCTURES

staticsFALL ARREST SYSTEMS

safetyMEMBRANES AND ACCESSORIES

technical physics

TECHNICAL DRAWINGS TECHNICAL DATASHEETS CALCULATION SOFTWAREINSTRUCTION PAPER

DIRECT CONSULTING AND TRAINING

Technical support for clients and technical operators

Problem solving for the design and realization processes

Specific designing of requested items

Implementation of products using 3D design software for timber structures

CREATION OF DESIGN TOOLS


rothoblaas structural renovation en 01

Documents