ROLLANT350 340

Round balers

2 3

go.claas.com/ucf2013

Contents

Product Range 4ROLLANT 350 RC 6ROLLANT 340 RC 8

Technology 10Pick-up 12ROTO CUT / ROTO FEED / Feed rake 14Bale chamber / MAXIMUM PRESSURE SYSTEM 16Wrapping and tying 18Operation 20Service 22

Specifications 23Tyres 23

A well-rounded product – ROLLANT from CLAAS.

4 5

ROLLANT product rangeThe best-selling baler.

ROLLANT is the top-selling silage baler in the world.ROLLANT balers are the prime choice for cost-effective silage, hay and straw baling. The bales are dense, well shaped and firmly wrapped or tied for ease of transport and storage.

ROLLANT 350 | 1.20 x 1.25 m

ROLLANT 340 | 1.20 x 1.25 m

6 7

ROLLANT 350 RC | 350 RFROLLANT 350 RC | 350 RF.

Page1 Bale size 1.20 x 1.25 m 62 2.10-m pick-up with oscillating guide wheels 123 ROTO CUT: large 14-blade chopping rotor

ROTO FEED: powerful feed rotor14

4 Individual blade protection with ROTO CUT 145 ROTO REVERSE 156 Fixed chamber with 16 profiled rollers 167 MAXIMUM PRESSURE SYSTEM II (MPS II) 168 Net wrap and/or twine tying 179 Dual-acting hydraulic rams to open

and close the tailgate18

10 Automatic chain lubrication 611 CLAAS STANDARD TERMINAL (CST)

or OPERATOR20

12 Large tyres 23

Rock-hard premium quality.

Good-quality silage and straightforward handling for distribution or in the feed mixer, thanks to the uniformly chopped slices with the ROLLANT and the reliable ROTO CUT system. When used in combination with the MAXIMUM PRESSURE SYSTEM, the ROLLANT 350 RC delivers rock-hard, high-density bales offering top forage quality.

8 9

11

ROLLANT 340 RC | 340 RF | 340 RROLLANT 340 RC | 340 RF | 340 R.

Page1 Bale size 1.20 x 1.25 m 82 2.10-m pick-up with rigid guide wheels 123 ROTO CUT: large 14-blade chopping rotor

ROTO FEED: powerful feed rotorFeed rake: protection for the forage

14

4 Individual blade protection with ROTO CUT 145 ROTO REVERSE 156 Fixed chamber with 16 profiled rollers 167 Net wrap and/or twine tying 188 Dual-acting hydraulic rams to open

and close the tailgate16

9 Automatic chain lubrication 810 CLAAS STANDARD TERMINAL (CST)

or OPERATOR 20

11 Large tyres 23

Excellent value for money.

Fully equipped with the components from its big brother, the ROLLANT 340 is equally powerful, yet with lower power requirements. It produces uniformly firm hay and straw bales with excellent qualities.

10 11

TechnologyFull performance in any crop.

12 13

Pick-upTop performance from day one.

Extra-width pick-up.

Both the ROLLANT ROTO CUT and ROTO FEED models come with the widest pick-up on the round baler market as standard. With a width of 2.10 metres, the ROLLANT pick-up ensures precise following of ground contours and thorough raking.

Clean field clearance.

Irregular and extra-wide swaths are cleanly raked up by the 1.90-metre pick-up. The tine spacing on the heavy-duty pick-up has been carefully selected for thorough clearance of short crops.

Fixed edges.

Large stub augers on either side feed the crop to the intake, giving extra bale density around the edges. This in turn improves bale stability, and the bales withstand rough handling better, but do not lose their shape during transport or over long storage periods.

Good visibility.

The pick-up is located well forward on the baler, maximising the driver’s visibility from the cab. This makes it easier to monitor the crop flow and prevents blockages occurring.

ROLLANT 350 RC 350 RF 340 RC 340 RF 340 RPick-up width m 2.10 2.10 2.10 2.10 1.85DIN raking width m 1.90 1.90 1.90 1.90 1.65Rigid guide wheels – – □ □ □Oscillating guide wheels □ □ □ □ □Crop guard □ □ □ □ □

□ Available – Not available

14 15

ROTO CUT | ROTO FEED | Feed rakeThe name says it all.

ROTO CUT – the 70-mm fine cut.

The ROTO CUT system runs at over 7,000 chops per minute. Four rows of tines gather in the crop evenly through the 14 individually secured knives. The crop is guided over the centre of the blades and chopped exactly. A special system of strippers keeps the rotor clean throughout the operation. The precise angle of the feed tines prevents crushing of the crop as it passes through. The uniform chopped slices improve silage quality and enable easy distribution both in silage preparation and later in the feed mixer.

ROTO REVERSE – the built-in reversing unit.

The reverser is powered hydraulically and comes into its own in non-stop operation at the limit of its power range. Using the CLAAS ROTO REVERSE reversing unit, you can clear blockages in the intake area in seconds from the comfort of the tractor seat.

ROTO FEED – top performance without chopping.

If you don't need to chop the crop, and want large bale weights and high performance, the ROTO FEED ensures a smooth crop flow from the pick-up into the baling chamber.

Feed rake – high forage quality without chopping.

The ROLLANT 340 is ideally suited for farmers who definitely do not want to chop the crop, and who place an emphasis on gentle forage handling. The feed rake pulls the crop continuously from the pick-up and actively feeds it into the baling chamber, ensuring a high throughput.

More functional safety.

The 14 individually secured blades are spring-loaded to give way when a foreign object passes through. The unaffected knives continue to produce a clean and reliable cut, guaranteeing a perfect forage quality.

High-speed blade removal.

When the baling chamber is opened, the blades can be easily installed and removed from above.

ROLLANT 350 RC 350 RF 340 RC 340 RF 340 RROTO CUT □ – □ – –ROTO REVERSE □ – □ – –ROTO FEED – □ – □ –Feed rake – – – – □

□ Available – Not available

16 17

Bale chamber | MAXIMUM PRESSURE SYSTEM II

A reliable principle that CLAAS has followed for decades. The tailgate is locked hydraulically and constantly monitored by the pressure gauge.

High operational reliability.All the ROLLANT balers feature heavy-duty drive chains that are automatically lubricated each time the tailgate is closed.

Variable bale density in the ROLLANT 340.The right bale density for different crops is set independently by adjusting the hand wheel.

MPS II – for better compaction.

Thanks to the bow-shaped arrangement of the 16 profiled rollers, the bales rotate inside the baling chamber with minimal power consumption. With up to 1.3 tonnes of MPS II pressure for compressing the core and 20 percent more closing pressure (4.8 tonnes) for bale compaction, the ROLLANT delivers perfectly compacted bales. The new MPS II system achieves higher bale density with less tractor power. The result is perfectly formed, highly compacted, easy-to-store round bales every time.

Hydraulic pressure control.

The locking mechanism via the hydraulic rams enables the tailgate to adjust and lightly resonate in line with the rising pressure as the bale size increases. The bale is able to rotate at all times and the baling procedure is not decelerated or inhibited in any way.

Quick open and close.

With the dual-acting hydraulic rams, the tailgate can be opened and closed especially quickly from the tractor seat.

The professional’s choice.

Outstanding technology.

Robust, reliable, enduring design features for high performance and dense bales – these are the hallmarks of the CLAAS ROLLANT round balers. The 16 extra-strength steel rollers with profiled surfaces speed up the crop flow and compress the harvested crop into firm, stable bales, ensuring reliable bale rotation, even in very dry harvesting conditions. The new rugged bale rollers installed at the high-load locations within the bale chamber ensure maximum operating reliability in all harvesting conditions. ROLLANT technology – the right choice for a smooth harvest.

MAXIMUM PRESSURE SYSTEM – for rock-hard bales.

This swivel-mounted three-roller segment in the ROLLANT tailgate provides the additional pressure. The steel-roller baling chamber with the unique MPS guarantees rock-hard bales and high core compaction. At the start of every bale, the three MPS rollers extend into the baling chamber. As the chamber fills up, pushing hard against the heavy-duty springs, the rollers are pressed upwards into their final position as the bale expands. The smaller initial chamber size starts the bale turning much sooner, compressing the bale from the core outwards.

ROLLANT 350 RC 350 RF 340 RC 340 RF 340 RMPS II □ □ – – –Manually adjustable hydraulic baling pressure

– – □ □ □

□ Available – Not available

18 19

Automatic tyingCrooked wrapping is a thing of the past.

Top-quality bales deserve nothing less.

Twine or net – ROLLANT gives you the choice. The ROLLATEX net wrapping system saves precious time, since the process is fully automated and takes only a matter of seconds. The fully adjustable net guidance system allows the net to be applied tightly along the entire width of the bale, and firmly binds the edges as well.

Variable number of wraps.

As different crops require different amounts of wrapping, you can set the number of turns over a wide range according to the task at hand.

Economy version.

Twine wrapping is the traditional method used by many farms. Twine is a lower-cost alternative to net.

Plenty in reserve.

Up to 14 rolls of twine can be stored on the ROLLANT – enough wrapping material for a long, successful working day.

ROLLANT 350 RC 350 RF 340 RC 340 RF 340 RNet wrapping □ □ □ □ □Twine tying □ □ □ □ □

□ Available – Not available

20 21

OperationGreater operating comfort.

Operate with ease, react flexibly – the CLAAS STANDARD TERMINAL.

In the hectic forage harvesting period, every minute counts. So it's great if you have reliable technology to assist you.

A feature of the CLAAS STANDARD TERMINAL (CST) is that you can operate the basic functions directly from the tractor seat at the touch of a button. Simply select the type of tying – net wrap or twine – and set the automatic tying start function to suit your requirements. You also have the option of initiating the tying operation manually, for example if swath is left over.

A mechanical bale counter on the baler keeps you informed at all times about the machine's output. Four LEDs alert you to faults in the tying mechanism, enabling you to keep your ROLLANT running smoothly at all times.

Even more functions – the OPERATOR.

Changes of driver and changing harvesting conditions are the norm during harvesting periods. With the OPERATOR controlled via the ISOBUS module, you can programme the baler for the harvesting conditions prior to use. Firstly, you can use the CMT to set all the main functions, which you will also find on the CLAAS STANDARD TERMINAL. Secondly, the CMT lets you accurately control all the operations taking place behind the tractor during baling and tying. The terminal also provides you with precise information on the number of bales made per day, the total number of bales and the total time taken.

ROLLANT 350 RC 350 RF 340 RC 340 RF 340 RCLAAS STANDARD TERMINAL (CST) □ □ □ □ □OPERATOR □ □ □ □ □

Information menu:This menu provides you with key data on the baler, in particular electrical voltage.

OPERATOR menu options.

Task menu:Control of the entire machine, display of all important information, such as knife position, tying, customer number, bale status display.

Operating menu:Up to 20 work records can be stored. Details include total hours, number of bales and bales cut using ROTO CUT.

Settings menu:Setting of the period between display of the baling stop in the cab and the automatic start of tying with the net wrap and twine tying process.

□ Available – Not available

22 23

Keeping you up and running –CLAAS Service & Parts.

Your requirements count.

You can always rely on us: we'll be there whenever you need us – everywhere, quickly and reliably, around the clock if necessary, with precisely the solution that your machine or business requires. Keeping you up and running.

100% operating reliability.

Fitting CLAAS ORIGINAL parts ensures the highest degree of operating reliability. Our parts are perfect-fitting, high-quality series parts produced using the latest manufacturing methods and subject to continuous quality controls.

Your machine has a crucial role to play – so ensuring its relia-bility is essential. We think in terms of solutions: for your har-vesting requirements and your business. Specially matched to your machine: precision-manufactured parts, high-quality con-sumables and useful accessories. We will supply exactly the right solution for your machine from our comprehensive pro-duct range. Keeping you up and running.

Always quickly on the scene.

A tight-knit service network and personal contact partners ensure that we are always easily accessible – from sales staff to technical support and customer service.

CLAAS dealers are among the most efficient agricultural tech-nology companies in the world. Our service teams are ideally qualified and equipped with the all-important special tools and diagnostic systems. CLAAS Service stands for high-quality work which meets all your expectations with regard to expertise and reliability. Keeping you up and running.

Worldwide coverage from Hamm.

Our central spare parts warehouse delivers all ORIGINAL parts quickly and reliably all over the world. Your local CLAAS partner can supply the right solution for your harvest or your business within a very short time. Keeping you up and running.

● Standard ○ Optional □ Available – Not available

ROLLANT 350 RC 350 RF 340 RC 340 RF 340 R

HitchingPTO shaft speed rpm 540 540 540 540 540Power requirement kW/hp 64/87 64/87 55/75 55/75 55/75Cam-type overload clutch ● ● ○ ○ ○

Mechanical jack ● ● ● ● ●

Hydraulic connectionOne-way spool valve for pick-up lift ● ● ● ● ●

Dual-acting spool valve for tailgate cylinders ● ● ● ● ●

Pick-upWidth m 2.10 2.10 2.10 2.10 1.85DIN raking width m 1.90 1.90 1.90 1.90 1.65Number of tine bars 4 4 4 4 4Ground tracking via two rigid pick-up guide wheels – – ● ● ●

Ground tracking via two oscillating pick-up castor guide wheels ● ● ○ ○ ○

Crop guard ● ● ○ ○ ○

Crop feedRotor ROTO CUT ROTO FEED ROTO CUT ROTO FEED Feed rakeNumber of knives 14 – 14 – –ROTO REVERSE ○ ○ ○ ○ –

Bale chamberMAXIMUM PRESSURE SYSTEM II (MPS II) ● ● – – –Automatic chain lubrication ● ● ● ● ●

Bale chamber dimensionsWidth m 1.20 1.20 1.20 1.20 1.20Diameter m 1.25 1.25 1.25 1.25 1.25

OperationCLAAS STANDARD TERMINAL (CST) ● ● ● ● ●

OPERATOR ○ ○ ○ ○ ○

Wrapping and tyingNet wrap and/or twine tying ● ● ● ● ●

Number of twine reels in the twine box 6 6 6 6 6

Bale drop onto fieldBale ejector ● ● ● ● ●

Tyres11.5/80 R 15.3 8 PR ● ● ● ● ●

15.0/55 R 17 10 PR ○ ○ ○ ○ ○

19.0/45 R 17 10 PR ○ ○ ○ ○ ○

Dimensions and weightsLength m 4.70 4.70 4.70 4.70 4.70Width m 2.50 2.50 2.50 2.50 2.50Height m 2.30 2.30 2.30 2.30 2.30Weight kg 2990 2990 2810 2685 2685

CLAAS continually develops its products to meet customer requirements. This means that all products are subject to change without notice. All descriptions and specifications in this brochure should be considered approximate, and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please refer to your nearest CLAAS dealer and their price list for local specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid any risk of danger, never remove these protective panels yourself. In this respect, please refer to the relevant instructions in the operator’s manual.

11.5/80 R 15.3 8 PR 15.0/55 R 17 10 PR 19.0/45 R 17 10 PR

623012000615 AN ME 0717 / 00 0259 720 4

CLAAS KGaA mbHMühlenwinkel 133428 HarsewinkelDeutschlandTel. +49 5247 12-0claas.com