roll rings - saar-hartmetall.de e.pdf · • roll rings made of tungsten carbide and of pm-steel...
TRANSCRIPT
•RollringsmadeofTungstenCarbideandofPM-Steel Manufacturingsize:uptoø530mm Condition:groovedorsmoothasrequired
•TungstenCarbide–steelcompoundrolls(Saracom)
•CompositerollswithTungstenCarbideringsorPMhigh speedsteelringsforintermediatestand(SARAMAX)
•PinchrollsandguiderollsmadeofTungstenCarbideandPM-Steel
Forfurtherinformationpleasecontact:phone:++496806/3089-242fax:++496806/[email protected]
Roll rings and composite rolls for wire rod mills, bar and section mills and hot reducing tube mills
ROLL RINGS
POWDER METALLURGY
Manufacturingsize: •max.sinter-/HIP-ø: 530mm •max.HIP-length: 750mm •max.sinteringlength:1300mm
Applications: •Wear protection parts (plates, strips) •Forming tools
(mandrels, punches, cores, dies) •Circular knives, shear blades,
cutting-off blades •Cutting tools •Hot forming tools for the glass industry •Hot pressing dies for nonferrous metals •Fittings for power plants
Forfurtherinformationpleasecontact:phone:++496806/3089-265 PowderMetallurgicalapplicationsphone:++496806/3089-200 TungstenCarbideapplications
Tungsten Carbide• Co-binder grades• Ni-binder grades• Ni/Co-binder grades
PM-Alloy• Steels• Stellites• Superalloys
SARACOM• Steel/Tungsten Carbide• Steel/PM-Steel• Steel/Stellite• Steel/Superalloy
•Coatedsolidcarbideinsertsandbrazedinserts•Toolholdersandcassettes•Cuttingheads•Feedrolls,guiderolls•Holdersforrolls,bolts•Guidestrips•Straighteningrolls,calibratingrolls,measuringrolls
•Chamfering-,facing-andcenteringtools•Barsupports•Polishingdisks•Jaws
Forfurtherinformationpleasecontact:phone:++496806/3089-280fax:++496806/[email protected]
TOOLS FOR THE PRODUCTION OF BRIGHT STEELS
Special Tools made of Tungsten Carbide, steel, composite materials and cobald-, nickel-, and iron-base powder metallurgical alloys
WEAR TOOLS AND FORMING TOOLS
•Coldheadingtools(dies,cores)•Massiveformingtools(dies,cores,punches)•Drawingtools(pressurepads,cuttingrings,
drawingdies,cuppingmandrels)•Bordering-andformingtools•Plasticizingcylinders,solidcarbidefeedscrewsand
accessories•ExtrusiontoolsmadeofTungstenCarbideandof
compositematerials•Hotcuttingtools•Pressingrings,pressingmoulds,punchesanddies
forthemanufactureofdiamondtools•Cuttingknivesandcuttingdisksfortheglassindustry•Shearbladesforslittingsheetmetalandforcutting
paper•Circularknives
Forfurtherinformationpleasecontact:phone:++496806/3089-263fax:++496806/[email protected]
Complete tool systems and wear parts for peeling machines of different types and dimen-sions, tools for the production of drawn- and ground bright steels, tools for machining bar ends
•Standardcuttinginserts(DIN)andspecialcuttinginserts
•Turning-andmillingtoolsforroughmachining•Specialshapingtools•Standard-andspecialholdersforturninginserts•Drillbitswithholder•Standardtoolbits(DIN)andspecialtoolbits•Cuttingbladesfortheplasticindustry•Drillsfortheminingindustry•Carbide-tippedmillingdisksforroadwork•Millinginsertsforcleaningfoundryladles•TungstenCarbideblanks
Forfurtherinformationpleasecontact:phone:++496806/3089-326fax:++496806/[email protected]
Standard- and special cutting tools made of Tungsten Carbide and rapid steel as well as carbide-tipped tools with the matched holder
CUTTING TOOLS
TUBE TOOLS
•Mountingunits•Towbarsandimpeders•Notchingcarrierswithnotchingroll•Insidedeburringtoolswithcuttingringholders•Holders,insertsandbladesforoutsidedeburring•Specialtoolsforinside-andoutsidedeburring•Cutting-offblades
Toolsformachiningtubeends(chamfering,facingetc.)
• Specialtuberolls• Specialweldingrolls• aswellastoolsforthespringindustry
Forfurtherinformationpleasecontact:phone:++496806/3089-300fax:++496806/[email protected]
Tools for inside- and outside deburring of longitudinally welded tubes, I.D. 14 – 600 mm, as well as tools for the manufacture and machining of tubes
POWDER METALLURGY
Composite materials for different manufacturing branches
Near net shape products PM Near net shape products TC
Cold working materials and tools
Hot working and high temperature resisting materials and tools
SAR MANT®
SAR MAX®
SAR MET®
SAR STEL®
SAR THERM®
SAR COM®
GIG NT®
High speed steels
Carbide grades for cutting- and forming applications
Clamping systems
Powder metallurgical high wear resisting steels
Powder metallurgical hot temperature resisting – and non-scaling stellites
Powder metallurgical high temperature resisting super alloys
Powder metallurgical Tungsten Carbide-steel compounds
Matthias-Nickels-Straße 17aD-66346 Püttlingenphone: ++49 6806/3089-0fax: ++49 6806/3089-129E-Mail: [email protected]: www.saar-hartmetall.de