rohs - jacarem.co.uk...iec 60807-2 & iec 60352-5 ul recognized telecommunication file #e49351 ul...
TRANSCRIPT
-
MATERIALS AND FINISHES:Insulator: Glass filled polyester per ASTM D5927,
UL 94V-0, blue color.Contacts: Precision machined copper alloy.Contact Plating: Professional performance - Gold flash
over nickel plate. Other finishes availableupon request.
Shells: Steel with tin plate; zinc plate with chro-mate seal, stainless steel passivated.Other materials and finishes availableupon request.
Mounting Spacers Copper alloy or steel with zinc plate andand Brackets: chromate seal or tin plate; stainless
steel, passivated.Jackscrew System: Brass or steel with zinc plate and chro-
mate seal or clear zinc plate or tin plate;stainless steel, passivated.
Vibration Lock Systems: Lock tabs, nickel plated steel.Low magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:Contacts Solid Metal Size 20 contact, male - 0.040 inch
Construction: [1.02mm] mating diameter. Female con-tact - rugged open entry design orPosiBand closed entry design, see page 1for details.
Contact RetentionIn Insulator: 5 lbs. [21 N] minimum.
Connector Polarization: Trapezoidal shaped shells and polarizedjackscrews.
Locking System: Jackscrews and vibration locking systems.
Mechanical Operations: 500 operations per IEC 60512-5 for openentry1000 operations per IEC 60512-5 forclosed entry
61DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
PCD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL / INDUSTRIAL / MILITARY QUALITYCOMPLIANT PRESS-FIT
STANDARD DENSITY D-SUBMINIATURE
ELECTRICAL CHARACTERISTICS:Contact Current Rating:
Open Entry Contacts: 7.5 amperes nominal
Closed Entry Contacts, tested per UL 1977:
18 amperes, 2 contacts energized.14 amperes, 6 contacts energized.11 amperes, 15 contacts energized.10 amperes, 25 contacts energized.9 amperes, 50 contacts energized.
See temperature rise curves on page 2 for details.
Initial Contact Resistance: 0.008 ohms maximum per IEC 60512-2, Test 2a for open entry.0.004 ohms maximum for closedentry.
Proof Voltage: 1000 V r.m.s.Insulator Resistance: 5 G ohms.Clearance and Creepage
Distance [minimum]: 0.039 inch [1.0mm].Working Voltage: 300 V.
ELECTRICAL CHARACTERISTICS OF COMPLIANT CONNECTION TO PLATED-THROUGH-HOLE OF PRINTED BOARD:Initial Contact Resistance
of Connection: Less than 0.001 ohms per IEC 60512-2, Test 2a.
Change in ContactResistance of Connectionafter Mechanical, Electrical Less than 0.001 ohms increase per or Climatic Conditioning: IEC 60512-2, Test 2a.
Gas-tight Less than 0.001 ohms increase inConnections Test: contact resistance after 1 hour per
EIA 364, TP36, Method One.
CLIMATIC CHARACTERISTICS:Temperature Range: -55°C to +125°C.
PCD COMPLIANT PRESS-D CONNECTOR TECHNICAL CHARACTERISTICS
Size 20 Contacts, FixedMachined Compliant Press-Fit
Three Performance Levels ForBest Cost / Performance Ratio
Professional QualityIEC 60807-2 & IEC 60352-5
UL Recognized TelecommunicationFile #E49351 UL File #140980
PCD series connectors are quality connectors with compliant terminations. The low press-in force required toinstall the contacts into the board eliminates printed boardpressure-warp and twisting stresses which can result inexpensive repair or replacement of printed boards and backpanels.
Five standard connector variants are offered in arrange-ment of 9, 15, 25, 37, and 50 contacts. PCD connectors
are mateable and compatible with all D-subminiature connectors conforming to IEC 60807-2, IEC 60807-3, anddimensional requirements of MIL-DTL-24308.
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant For RoHS optionssee page 65.
-
PCD
SERI
ES
62DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL / MILITARY QUALITYCOMPLIANT PRESS-FIT
STANDARD DENSITY D-SUBMINIATURE
222120
31 2
2423 26 2725 3028 29 32 3331
654 87 1211109 1413
3634 35 37
171615 1918
383534 3736 39 40 4341 42
5
18 20 2119
21 43
242322 272625
76 1098
45 4644 4947 48 50
333028 29 3231
131211 161514 17
9876
1 542 3
15141211109 13
321 87654
14
1 2
2524232221201817 191615
876543 1312109 11
CONTACT VARIANTS
FACE VIEW OF MALE CONNECTOR OR REAR VIEW OF FEMALE CONNECTOR
PCD 9 PCD 15 PCD 25
PCD 50PCD 37
STANDARD SHELL ASSEMBLY
CONNECTORVARIANT SIZES
A±0.015[0.38]
B±0.005[0.13]
B1±0.005[0.13]
C±0.005[0.13]
D±0.005[0.13]
D1±0.005[0.13]
E±0.015[0.38]
G±0.010[0.25]
H±0.010[0.25]
K±0.005[0.13]
M±0.010[0.25]
PCD 9 M1.213[30.81]
0.666[16.92]
0.984[24.99]
0.329[8.36]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.233[5.92]
0.422[10.72]
PCD 9 FPCD 9 S
1.213[30.81]
0.643[16.33]
0.984[24.99]
0.311[7.90]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
PCD 15 M1.541[39.14]
0.994[25.25]
1.312[33.32]
0.329[8.36]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.233[5.92]
0.422[10.72]
PCD 15 FPCD 15 S
1.541[39.14]
0.971[24.66]
1.312[33.32]
0.311[7.90]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.243[6.17]
0.429[10.90]
PCD 25 M2.088[53.04]
1.534[38.96]
0.329[8.36]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.230[5.84]
0.426[10.82]
PCD 25 FPCD 25 S
2.088[53.04]
1.511[38.38]
1.852[47.04]
0.311[7.90]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
PCD 37 M2.729[69.32]
2.182[55.42]
2.500[63.50]
0.329[8.36]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.230[5.84]
0.426[10.82]
PCD 37 FPCD 37 S
2.729[69.32]
2.159[54.84]
2.500[63.50]
0.311[7.90]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.243[6.17]
0.429[10.90]
PCD 50 M2.635[66.93]
2.079[52.81]
2.406[61.11]
0.441[11.20]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.230[5.84]
0.426[10.82]
PCD 50 FPCD 50 S
2.635[66.93]
2.064[52.43]
2.406[61.11]
0.423[10.74]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.243[6.17]
0.429[10.90]
0.036±0.008[0.91±0.20]
K
MB
C
A
E
B1
DD1
10°Typ.G
0.220 [5.59] Max.
0.265 [6.73]
H
1.852[47.04]
-
63DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
PCD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL / INDUSTRIAL / MILITARY QUALITYCOMPLIANT PRESS-FIT
STANDARD DENSITY D-SUBMINIATURE
0.225 [5.72] max.
thread length in
mounting post
0.265 [6.73]
*0.167 [4.24]
Ø0.027 [0.69]
lead-in
Ø0.049 [1.24]
contact termination
Fixed female jackscrews
Swage mounting post,
4-40 threads
Screw, 4-40 threads,
customer supplied
0.146 [3.71] Nominal D
A
0.112 [2.84]
B ±0.008 [0.20]
C
D 0.112 [2.84]
0.112 [2.84]
NOTE:
*1 The effective length of the compliant section mayalso be varied (longer or shorter) and can beselectively positioned and centered at severalpoints along the contact termination length, permitting high or low profile mounting of theconnector on printed boards.
RIGHT ANGLE (90°) COMPLIANT PRESS-FIT TERMINATIONCODE 62*1
STRAIGHT COMPLIANT PRESS-FIT TERMINATIONCODE 98
Typical Part Number:PCD25S62R7000 Typical Part Number:
PCD50S62R7000
For straight compliant press-fitcontacts, specify code 98 instep 4 of ordering information.
Detail ofOmega contacts
Typical Part Number: PCD25F98S0T20
PCD*S62**** 0.283 [7.19] CONTACT EXTENSION
PART NUMBER*1 A*2 B C D
PCD25S62****2.072[52.63]
1.852[47.04]
0.339[8.61]
0.283[7.19]
PCD50S62****2.626[66.70]
2.406[61.11]
0.395[10.03]
0.283[7.19]
For right angle (90°) compliantpress-fit contacts, specifycode 62 in step 4 of ordering information.
SUGGESTED PRINTED BOARD HOLE SIZES:For right angle (90°) printed board contact hole pattern, see page 64.
SUGGESTED PRINTED BOARD HOLE SIZES:For right angle (90°) printed board contact hole pattern, see page 64.
NOTE:
*1 Currently available in 25 and 50 female variants only,contact Technical Sales for availability of other variants.
*2 “A” dimension applies for metal angle brackets only.Consult Accessories D-subminiature Catalog for “A”dimension when plastic brackets are used.
*2
*1
Positronic recommends the practice of using mounting hardware to secure connector to printed circuit board.
Positronic recommends the practice of using mounting hardware to secure connector to printed circuit board.
-
PCD
SERI
ES
64DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL / INDUSTRIAL / MILITARY QUALITYCOMPLIANT PRESS-FIT
STANDARD DENSITY D-SUBMINIATURE
0.216 [5.49]
0.108 [2.74]
Typ.
0.162 [4.11]
0.054 [1.37]
Typ.
Sym. 0.656
[16.66]0.378 [9.60]
0.324 [8.23]
0.108 [2.74]
Typ.
0.054 [1.37]
Typ.
0.926 [23.52] 0.652 [16.56]
Sym. Sym.
0.109 [2.77]
Typ.
0.598 [15.19]
0.054 [1.37]
Typ.
1.250 [31.75] 0.978 [24.84]
0.924 [23.47]
0.055 [1.40]
Typ.
0.109
[2.77]
Typ.
Sym.1.203
[30.56]
0.870
[22.10]
0.109
[2.77]
Typ.
0.055 [1.40]
Typ.
Sym.
0.815 [20.70]
0.492
[12.50]
0.112
[2.84]
0.112
[2.84]
0.112
[2.84]
0.112
[2.84]
0.224
[5.69]
0.112
[2.84]
PCD 9 PCD 15 PCD 25
PCD 50PCD 37
RIGHT ANGLE (90°) AND STRAIGHT COMPLIANT PRESS-FIT PRINTED BOARD CONTACT HOLE PATTERN
MOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW.
SUGGESTED PRINTED BOARD HOLE SIZES:Suggest 0.120 [3.05] Ø hole for connector mounting holes
NOTE: For suggested printed board recommended drill hole sizes, plating andfinished hole sizes for compliant contact termination positions, see page 81.For compliant press-fit connector installation tools, see page 80.
-
65DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
PCD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL / INDUSTRIAL / MILITARY QUALITYCOMPLIANT PRESS-FIT
STANDARD DENSITY D-SUBMINIATURE
ORDERING INFORMATION - CODE NUMBERING SYSTEMSpecify Complete Connector By Selecting An Option From Step 1 Through 8
STEP 3 - CONNECTOR GENDERM - Male F - Female - Professional Level
open entry contactsS - Female - Industrial Level
PosiBand closed entry contacts
Military plating options available.
1 2 3 4 5 6 7 8 9
PCD 25 F 98 S 0 0 X /AA
10
-14
STEP 1 - BASIC SERIESPCD series
STEP 10 - SPECIAL OPTIONS
-14 - 0.000030 [0.76µ] gold overnickel.
-15 - 0.000050 [1.27µ] gold overnickel.
CONTACT TECHNICAL SALES FOR SPECIAL OPTIONS
STEP 8 - Shell Options0 - Zinc plated, with chromate seal.
*3 S - Stainless steel, passivated.X - Tin plated.Z - Tin plated and dimpled (male connectors only).
STEP 6 - HOODS0 - None.
STEP 5 - MOUNTING STYLEB3 - Bracket, Mounting, Right Angle (90°) Metal with Cross
Bar.R2 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrewswith Cross Bar.
R6 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 0.120 [3.05] Ø Mounting Hole with CrossBar.
R7 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Threads with Cross Bar.
R8 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Locknut with Cross Bar.
S - Swaged Mounting Post 4-40 Threads0.265 [6.73] Length.
STEP 4 - CONTACT TERMINATION TYPE*1 62 - Right angle (90°) printed circuit board mount,
compliant press-fit98 - Straight printed circuit board mount, compliant
press-fit
STEP 2 - CONNECTOR VARIANTS9, 15, 25, 37, 50
STEP
EXAMPLE
STEP 9 - ENVIRONMENTAL COMPLIANCEOPTIONS
/AA - Compliant per EU Directive2002/95/EC (RoHS)
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant
STEP 7 - LOCKING AND POLARIZING SYSTEMS0 - None.
*2 V3 - Lock Tab.T6 - Fixed Male and Female Polarized Jackscrews.T2 - Fixed Female Jackscrews, 4-40 Thread.
Note: These options must be ordered with connector andcannot be ordered separately.
NOTE: If compliance to environmental legislation is not required, this step will notbe used. Example: PCD25F98S00X
NOTE: Once you have made a connector selection, contactTechnical Sales if you would like to receive a drawing in DXF, PDFformat or a 3-dimensional IGES, STEP, or SOLIDWORKS file.
2-D Drawing 3-D Model
*1 Available in 25 and 50 female variants only, contact Technical Sales foravailability of other variants.
*2 V3 locking systems are not available for connector variants 37 and 50.Jackscrews are highly recommended to minimize damage to contacts onvariants with high mating forces.
*3 For stainless steel dimpled male versions contact Technical Sales.
For information regarding COMPLIANT PRESSFIT INSTALLATION TOOLS, see pages 80.
-
3DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
GENERAL INFORMATION
D-SubPositronic Industriesconnectpositronic.com
GENERAL INFORMATION
C8
A1B1
B1
C4C2
A1
C7
C5
B1
A2
B2
C5
B2
B1
B1
C6
2
A1
B2
A2
C6
B2
A2C1
C3
DD62M000E6X
HDC25F5R7NV30
RD25M10LVL0
M24308/4-3F
M24308/23-39F
DD44F3S000-759.0
DD44M0000X-759.1
M24308/26-1
M24308/25-6
DD62F0S50T6X
EXPLODED VIEWS OF TYPICAL MATEDD-SUBMINIATURE CONNECTOR ASSEMBLIES
-
4DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
GENE
RAL
INFO
RMAT
ION
D-SubPositronic Industries
connectpositronic.com
GENERAL INFORMATION
C3
B2
C7
A2
C1B1
A2
CONNECTOR COMPONENT DESCRIPTION AND TERMINOLOGY
SD9M00Z0Z
MD9F5R80TX
A1 - Male and female signal contacts, size 22. Terminations may be crimp, solder cupand printed board mount.
A2 - Male and female signal contacts, size 20. Terminations may be crimp, solder cup,wrap post, compliant press-fit and printed board mount.
B1 - Unloaded connector insulators, male and female. Insulator retention system retainsall contact termination types. Insulator may be used as a free or fixed connector.
B2 - Loaded connector insulators, male and female. Insulators may be preloaded percustomer requirements with contacts having terminations of right angle (90°) orstraight solder printed board mount, wrap post, solder cup and press-fit. Insulatorcontact positions may be selectively loaded with contacts. Connectors are normal-ly fixed panel or printed board connectors.
C1 - Fixed female jackscrews are the stationary threaded members of the non-polarizedjackscrew system.
C2 - Fixed male and female jackscrews are the stationary threaded members of thepolarized jackscrew system.
C3 - Rotating male jackscrews and screwlocks are the rotating threaded members of thenon-polarized jackscrew system.
C4 - Rotating male and female jackscrews are the rotating threaded members of thepolarized jackscrew system.
C5 - Vibration locking system consists of lock tabs on fixed connector and slide locklever on free cable connector.
C6 - Blind mating connector system with pilot probes on free connector and receptacleguides on panel mounted fixed connector.
C7 - Cable adapters [Hoods] are used on the free cable connector to provide cable support and contact protection.
C8 - Knobs of the polarized rotating jackscrew system are affixed to the rotatingjackscrew by a set screw.
EXPLODED VIEWS OF TYPICAL MATEDD-SUBMINIATURE CONNECTOR ASSEMBLIES
-
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant For RoHS optionssee page 10.
5DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
MATERIALS AND FINISHES:Insulator: Nylon resin, UL 94V-0, black color.Contacts: Precision machined copper alloy. Contact Plating: Professional performance Gold flash over
nickel plate. Other finishes available uponrequest.
Shells: Steel with tin plate; zinc plate with chromateseal, stainless steel passivated. Other mate-rials and finishes available upon request.
Mounting Spacers and Brackets: Nylon; copper alloy or steel with zinc plate
and chromate seal or tin plate; phosphorbronze with tin plate; stainless steel, passivated; polyester.
Push-On Fasteners: Phosphor bronze or beryllium copper withtin plate.
Jackscrew Systems: Brass or steel with zinc plate and chromateseal or clear zinc plate or tin plate; stainlesssteel, passivated.
Vibration Lock Systems: Slide lock and lock tabs, steel with nickelplate.
Hoods: Composite and plastic, UL 94V-0; brass orsteel with zinc plate and chromate seal.Aluminum; aluminum with electroless nickelplate. For aluminum hoods, zinc content is1% maximum. Die cast zinc.
Low magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:Fixed Contacts: Size 20 contact, male - 0.040 inch [1.02mm]
mating diameter. Female contact - ruggedopen entry design.
Contact RetentionIn Insulator: 6 lbs. [27N]
Resistance To Solder 500°F [260°C] for 10 seconds duration per Iron Heat: IEC 60512-6.
MELO-D SERIES TECHNICAL CHARACTERISTICS
Size 20 Contacts, Fixed
IEC Publication 60807-2Performance Level Two
UL Recognized CSA RecognizedFile #E49351 File #LR54219
TelecommunicationUL File #14098
Melo-D series connectors are professional quality connectorsrecommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without emperature or humidity controls. These fixed contact connectorsmeet the dimensional and performance requirements of IEC60807-2, Performance Level Two.
Melo-D series connectors utilize precision machined contactswhich are fixed within the connector body. The female contact isan open entry design contact, precision machined of high tensilephosphor bronze.
Six standard connector variants are offered in arrangements of 9,15, 25, 29, 37 and 50 contacts. Each Melo-D connector variant isavailable with contact terminations for solder cup, wrap post, and
straight and right angle (90°) printed board mount terminations featuring a choice of three printed board footprints. Melo-D series connectors are mateable and compatible with all D-subminiature connectors conforming to IEC 60807-2, IEC 60807-3 and MIL-DTL-24308.
A wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock.
Contact Terminations: Solder cup contacts - 0.042 inch [1.06mm]minimum hole diameter for 20 AWG[0.5mm2] wire maximum.Straight Printed Board Mount - 0.028 inch[0.71mm] termination diameter.Right Angle (90°) Printed Board Mount -0.028 inch [0.71mm] termination diameterfor all printed board footprints.Wrap Post - 0.025 inch [0.64mm] square.
Shells: Male shells may be dimpled for EMI/ESDground paths.
Polarization: Trapezoidally shaped shells and polarizedjackscrews.
Mounting To Angle Brackets: Jackscrews and riveted fasteners with a0.120 inch [3.05mm] clearance hole, andthreaded riveted fasteners with 4-40 threadsand polyster lock inserts.
Mounting To Printed Board: Rapid installation push-on fasteners andthreaded posts.
Locking Systems: Jackscrews and vibration locking systems.Mechanical Operations: 500 operations minimum per IEC 60512-5.
ELECTRICAL CHARACTERISTICS:Contact Current Rating: 7.5 amperes nominal.Initial Contact
Resistance: 0.008 ohms maximum.Insulator Resistance: 5 G ohms.Proof Voltage: 1000 V r.m.s.Clearance and CreepageDistance [minimum]: 0.039 inch [1.0mm].Working Voltage: 300 V r.m.s.
CLIMATIC CHARACTERISTICS:Temperature Range: -55°C to +125°C.Damp Heat, Steady
State: 10 days.
MD series connectors can be supplied with interfacial seals and sealed between shell and insulator. This provides an additional degree of moisture resistance. See Accessories catalog for details.
-
6DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD
SERI
ES
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
222120
31 2
2423 26 2725 3028 29 32 3331
654 87 1211109 1413
3634 35 37
171615 1918
383534 3736 39 40 4341 42
5
18 20 2119
21 43
242322 272625
76 1098
45 4644 4947 48 50
333028 29 3231
131211 161514 17
9876
1 542 3
15141211109 13
321 87654
14
1 2
2524232221201817 191615
876543 1312109 11
21
11 12
20
21
26
1716
242322
13 14 15
25 2927 28
1918
76543 1098
C
A
E
BB1
DD1
K
MG
H
0.220 [5.59]
Max.
10° Typ.
0.120±0.010 [3.05±0.25]
0.032 [0.81]Total diametral float
Ø0.086+0.005-0.000 [Ø2.18+0.13-0.00]Mounting hole, two places
0.036±0.008
[0.91±0.20]
0.050±0.010
[1.27±0.25]
for stainless steel shell (0 option)
two places (02 option)
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places
Ø0.154 [3.91] Mounting hole,
CONTACT VARIANTSFACE VIEW OF MALE OR REAR VIEW OF FEMALE
MD 9 MD 15 MD 25
MD 29 MD 37 MD 50
STANDARD SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY WITH UNIVERSAL FLOAT MOUNTS (F)OPTIONAL SHELL ASSEMBLY (0, 02)
CONNECTORVARIANT SIZES
A±0.015[0.38]
B±0.005[0.13]
B1±0.005[0.13]
C±0.005[0.13]
D±0.005[0.13]
D1±0.005[0.13]
E±0.015[0.38]
G±0.010[0.25]
H±0.010[0.25]
K±0.005[0.13]
M±0.010[0.25]
9 M1.213[30.81]
0.666[16.92]
0.984[24.99]
0.329[8.36]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.233[5.92]
0.422[10.72]
9 F1.213[30.81]
0.643[16.33]
0.984[24.99]
0.311[7.90]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
15 M1.541[39.14]
0.994[25.25]
1.312[33.32]
0.329[8.36]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.233[5.92]
0.422[10.72]
15 F1.541[39.14]
0.971[24.66]
1.312[33.32]
0.311[7.90]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.243[6.17]
0.429[10.90]
25 M2.088[53.04]
1.534[38.96]
1.852[47.04]
0.329[8.36]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.230[5.84]
0.426[10.82]
25 F2.088[53.04]
1.511[38.38]
1.852[47.04]
0.311[7.90]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
29 M1.770[44.96]
1.274[32.36]
1.534[38.96]
0.450[11.43]
0.605[15.37]
1.322[33.58]
0.539[13.69]
0.217[5.51]
0.426[10.82]
29 F1.770[44.96]
1.251[31.78]
1.534[38.96]
0.431[10.95]
0.605[15.37]
1.322[33.58]
0.539[13.69]
0.237[6.02]
0.429[10.90]
37 M2.729[69.32]
2.182[55.42]
2.500[63.50]
0.329[8.36]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.230[5.84]
0.426[10.82]
37 F2.729[69.32]
2.159[54.84]
2.500[63.50]
0.311[7.90]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.243[6.17]
0.429[10.90]
50 M2.635[66.93]
2.079[52.81]
2.406[61.11]
0.441[11.20]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.230[5.84]
0.426[10.82]
50 F2.635[66.93]
2.064[52.43]
2.406[61.11]
0.423[10.74]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.243[6.17]
0.429[10.90]
-
0.135±0.005 [3.43±0.13] Ferrite inductor bar
Ferrite Inductor Bar L
Swaged spacer with push-on fastener phosphor bronze
A
Fixed female jackscrews
0.010 [0.25] Nominal
Fixed
female
jackscrews
0.495 [12.57]
0.720 [18.29]
0.025 [0.64] Sq.
7DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
Swaged spacer with push-on fastener phosphor bronze
Fixed female jackscrews
ØD
0.225 [5.71]
L
0.010 [0.25] NOMINAL
0.352 [8.94]
20 AWG max.
[0.5 mm ]
0.135 [3.43]
2
Fixed female jackscrews
Fixed male
jackscrew
Fixed female
jackscrew
Typical Part Number: MD15M200T6ZTypical Part Number: MD15M200T2Z
Typical Part Number: MD25F3S60T0
Fixed male and female polarized jackscrews available.Specify code T6 in step 7 of ordering information.
For solder cup contacts, specify code 2 in step 4
of ordering information.
For wrap post contacts,specify code 6 in step 4of ordering information.
STRAIGHT PRINTED BOARD MOUNT TERMINATIONCODE 3, 32 AND 33
FILTERING CHARACTERISTICS
AT
TE
NU
AT
ION
[d
B]
IMP
ED
AN
CE
[O
HM
S]
FREQUENCY
* NO-LOAD CONDITION
MD25M6S50T0
Typical Part Number: MD15F600T20
WRAP POST TERMINATIONCODE 6
RIGHT ANGLE (90°) PRINTED BOARD MOUNT CONNECTOR
STRAIGHT PRINTED BOARD MOUNT CONNECTOR
MATERIAL: Nickel zinc ceramic
IMPEDANCE
ATTENUATION*
For straight printed board mount contacts, specify code number in
step 4 of ordering information.
Specify code F or Q in step 6 of orderinginformation. F for ferrite inductor and Qfor ferrite inductor with push-on fastener.
SOLDER CUP TERMINATIONCODE 2
FERRITE INDUCTOR BAR FOR EMI/RFI NOISE SUPPRESSIONCODE F AND Q
CODENUMBER
L ØD
3 0.150 [3.81] 0.028 [0.71]
32 0.375 [9.53] 0.028 [0.71]
33 0.500 [12.70] 0.028 [0.71]
SERIESCODE NO.
A L
MD, MDX, HDC
32
0.375 [9.53] 0.240 [6.10]
ODD 0.375 [9.53] 0.165 [4.19]
DD 0.515 [13.08] 0.165 [4.19]
ED, HDC 36 0.375 [9.53] 0.101 [2.57]
MD, MDX 4 ---------- ----------
ODD 5 ---------- ----------
MD 59 ---------- ----------
MD, HDC 6 0.375 [9.53] 0.360 [9.14]
-
Specify code 59in step 4 of
ordering information 0.112 [2.84] Typ.
D
0.112 [2.84] Typ.0.112 [2.84] Typ.
D
AB
±0.008[0.20]jackscrews
female Fixed
X 0.233 [5.92]Oval hole Typ.
0.125 [3.18]
EC
713 12 11 10 9 8
2021222325 24
6 5 4 3 2 1
141516171819
Numbering shown is rear view of male and face view of female.
Ø0.028 [0.71]
0.125 [3.18]Nominal
8DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD
SERI
ES
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
0.112 [2.84] Typ.
0.112 [2.84] Typ.
D
jackscrews female Fixed B
±0.008 [0.20]
A
C
Specify code 5 in step 4 of
ordering information D
0.112 [2.84] Typ.
Numbering shown is rear view of male and face view of female.
0.160 [4.06] Nominal
Ø0.028 [0.71]
25 19 20 21 22 23 24
13 7 6 8 9 10 11 12
14 15 16 17 18
1 2 3 4 5
Push-on fastener beryllium copper
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATIONCODE 5, 0.283 [7.19] CONTACT EXTENSION
MD**5**** 0.283 [7.19] CONTACT EXTENSION
PART NUMBER A*1 B C D
MD9*5****1.204[30.58]
0.984[24.99]
0.339[8.61]
0.283[7.19]
MD15*5****1.532[38.91]
1.312[33.32]
0.339[8.61]
0.283[7.19]
MD25*5****2.072[52.63]
1.852[47.04]
0.339[8.61]
0.283[7.19]
MD29*5****1.754[44.55]
1.534[38.96]
0.395[10.03]
0.283[7.19]
MD37*5****2.720[69.09]
2.500[63.50]
0.339[8.61]
0.283[7.19]
MD50*5****2.626[66.70]
2.406[61.11]
0.395[10.03]
0.283[7.19]
Typical Part Number:MD25M59B0T2X
Typical Part Number:MD29M59B0T2X
Typical Part Number:MD50M5R4NT2X
Typical Part Number:MD25M5R4NT2X
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATIONCODE 59, 0.545 [13.84] CONTACT EXTENSION
MD50*59****2.626[66.70]
2.406[61.11]
0.275[6.99]
0.545[13.84]
PART NUMBER A*1 B C D
MD9*59****1.204[30.58]
0.984[24.99]
0.275[6.99]
0.545[13.84]
MD15*59****1.532[38.91]
1.312[33.32]
0.275[6.99]
0.545[13.84]
MD25*59****2.072[52.63]
1.852[47.04]
0.275[6.99]
0.545[13.84]
MD29*59****1.754[44.55]
1.534[38.96]
0.275[6.99]
0.545[13.84]
MD37*59****2.720[69.09]
2.500[63.50]
0.275[6.99]
0.545[13.84]
0.657[16.69]
E
0.601[15.27]
0.601[15.27]
0.601[15.27]
0.657[16.69]
0.601[15.27]
MD**59**** 0.545 [13.84] CONTACT EXTENSION
*1*1
NOTE:
*1 “A” dimension applies formetal angle brackets only.Consult Accessories D-subminiature catalog for“A” dimension when plasticbrackets are used.
*1
NOTE:
*1 “A” dimension applies formetal angle brackets only.Consult Accessories D-subminiature catalog for“A” dimension when plasticbrackets are used.
-
0.216 [5.49]
0.108 [2.74]
Typ.
0.162 [4.11]
0.054 [1.37]
Typ.
Sym. 0.656
[16.66]0.378 [9.60]
0.324 [8.23]
0.108 [2.74]
Typ.
0.054 [1.37]
Typ.
0.926 [23.52] 0.652 [16.56]
Sym. Sym.
0.109 [2.77]
Typ.
0.598 [15.19]
0.055 [1.40]
Typ.
1.250 [31.75] 0.978 [24.84]
0.924 [23.47]
0.055 [1.40]
Typ.
0.109
[2.77]
Typ.
Sym.1.203
[30.56]
0.870
[22.10]
0.109
[2.77]
Typ.
0.055 [1.40]
Typ.
Sym.
0.815 [20.70]
Sym.0.432
[10.97]
0.767
[19.48]
0.054
[1.37]
Typ.0.486
[12.34]
0.108 [2.74]
Typ.
0.492
[12.50]
0.112
[2.84]
0.112
[2.84]
0.112
[2.84]
0.112
[2.84]
0.224
[5.69]
0.112
[2.84]
0.224
[5.69]
0.112
[2.84]
9DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
Specify code 4in step 4 of
ordering information 0.112 [2.84] Typ.
D
0.112 [2.84] Typ.0.112 [2.84] Typ.
D
713 12 11 10 9 8
2021222325 24
6 5 4 3 2 1
141516171819
Numbering shown is rear view of male and face view of female.
C
AB
±0.008[0.20]jackscrews
female Fixed
Ø0.125[3.18]Typ.
Ø0.028 [0.71]
0.160 [4.06]Nominal
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATIONCODE 4, 0.450 [11.43] CONTACT EXTENSION
RIGHT ANGLE (90°) AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERNMOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW.
Typical Part Number: MD25M4B0T20
Typical Part Number:MD50M4B0T20
MD**4**** 0.450 [11.43] CONTACT EXTENSION
MD50*4****2.626[66.70]
2.406[61.11]
0.562[14.27]
0.450[11.43]
PART NUMBER A*1 B C D
MD9*4****1.204[30.58]
0.984[24.99]
0.506[12.85]
0.450[11.43]
MD15*4****1.532[38.91]
1.312[33.32]
0.506[12.85]
0.450[11.43]
MD25*4****2.072[52.63]
1.852[47.04]
0.506[12.85]
0.450[11.43]
MD29*4****1.754[44.55]
1.534[38.96]
0.562[14.27]
0.450[11.43]
MD37*4****2.720[69.09]
2.500[63.50]
0.506[12.85]
0.450[11.43]
MD9 MD15 MD25
MD50MD37MD29
SUGGESTED PRINTED BOARD HOLE SIZES:Suggest 0.045 [1.14] Ø hole for contact termination positions.Suggest 0.123 ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners.
*1
NOTE:
*1 “A” dimension applies formetal angle brackets only.Consult Accessories D-subminiature catalog for“A” dimension when plasticbrackets are used.
-
*1 STEP 6 - HOODS AND PUSH-ON FASTENERS
0 - None.J - Hood, Top Opening, Plastic.L - Hood, Side Opening, Plastic.Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.
Available in size 50 only.Y6 - Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 50 only.Z - Hood, Top or Side Opening, Robust and Extended Height,
Composite and Plastic with Rotating Male Jackscrews. Availablein size 9, 15, 25, 37, and 50 only.
H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only.G - Hood, EMI/RFI, Die Cast Zinc. Available in size 9, 15, 25, 37, and
50 only.*5 AN - Lightweight Aluminum Hood, nickel finish.*5 AC - Lightweight Aluminum Hood, no finish.
W - Hood, Top or Side Opening, Plastic. Available in size 9, 15, and25 only.
N - Push-on fastener for right angle (90°) mounting brackets.*2 F - Ferrite inductor.*2 Q - Ferrite inductor for use with push-on fastener and right angle
(90°) mounting brackets.
10DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MD
SERI
ES
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
MD
SERI
ES
*1 For additional information on accessories listed in steps 5, 6 and 7,see Accessory Catalog.
*2 Ferrite inductor is available on contact types 32, 33, 4, 59 and 6 only.For more information on ferrite inductors, see page 7.
*3 VL, V3 and V5 locking systems are not available for connector variants37 and 50. Jackscrews are highly recommended to minimize damageto contacts on variants with high mating forces.
*4 For stainless steel dimpled male versions contact Technical Sales.*5 AN and AC hood are not available for connector variant 29. Consult
Technical Sales for availability.
ORDERING INFORMATION - CODE NUMBERING SYSTEMSpecify Complete Connector By Selecting An Option From Step 1 Through 8
STEP 3 - CONNECTOR GENDER
M - Male F - Female
1 2 3 4 5 6 7 8 9
MD 25 F 59 R7 N T6 X /AA
10
-14
STEP 1 - BASIC SERIESMD series.
STEP 10 - SPECIAL OPTIONS
-14 - 0.000030 [0.76µ] gold overnickel.
-15 - 0.000050 [1.27µ] gold overnickel.
CONTACT TECHNICAL SALES FOR SPECIAL OPTIONS
STEP 8 - Shell Options0 - Zinc plated, with chromate seal.
*4 S - Stainless steel, passivated.X - Tin plated.Z - Tin plated and dimpled (male connectors only).
*1 STEP 5 - MOUNTING STYLE0 - Mounting Hole, 0.120 [3.05] Ø.02 - Mounting Hole, 0.154 [3.91] Ø.B - Bracket, Mounting, Right Angle (90°) Metal.B3 - Bracket, Mounting, Right Angle (90°) Metal with Cross Bar.B7 - Bracket, Mounting, Right Angle (90°) Plastic.B8 - Bracket, Mounting, Right Angle (90°) Plastic with Cross Bar.F - Float Mounts, Universal.P - Threaded Post, Brass, 0.225 [5.71] Length.P2 - Threaded Post, Nylon, 0.225 [5.71] Length.R - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews.R2 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews withCross Bar.
R3 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 0.120 [3.05] Ø Mounting Hole.
R4 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Threads.
R5 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Locknut.
R6 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 0.120 [3.05] Ø Mounting Hole with Cross Bar.
R7 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Threads with Cross Bar.
R8 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Locknut with Cross Bar.
S - Swaged Spacer, 4-40 Threads, 0.225 [5.71] Length.S2 - Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.S5 - Swaged Locknut, 4-40 Threads.S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.225
[5.71] Length.S7 - Swaged Spacer with Push-on Fastener for use with Ferrite
Inductor, 4-40 Threads, 0.375 [9.53] Length.
STEP 4 - CONTACT TERMINATION TYPE2 - Solder cup.3 - Solder, Straight Printed Board Mount with 0.150
[3.81] Tail Length.32 - Solder, Straight Printed Board Mount with 0.375
[9.52] Tail Length.33 - Solder, Straight Printed Board Mount with 0.500
[12.70] tail length.4 - Solder, Right Angle (90°) Printed Board Mount with
0.450 [11.43] Contact Extension.5 - Solder, Right Angle (90°) Printed Board Mount with
0.283 [7.19] Contact Extension.59 - Solder, Right Angle (90°) Printed Board Mount with
0.545 [13.84] Contact Extension.6 - Wrap Post.
STEP 2 - CONNECTOR VARIANTS9, 15, 25, 29, 37, 50
STEP
EXAMPLE
STEP 9 - ENVIRONMENTAL COMPLIANCEOPTIONS
/AA - Compliant per EU Directive2002/95/EC (RoHS)
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant
*1 STEP 7 - LOCKING AND POLARIZING SYSTEMS
0 - None.*3 V3 - Lock Tab, connector front panel mounted.*3 V5 - Lock Tab, connector rear panel mounted.*3 VL - Lock Lever, used with Hoods only.
T - Fixed Female Jackscrews.T2 - Fixed Female Jackscrews.T6 - Fixed Male and Female Polarized Jackscrews.E - Rotating Male Jackscrews.
E2 - Rotating Male Screw Locks.E3 - Rotating Male with Internal Hex for 3/32 Hex DrivesE6 - Rotating Male and Female Polarized Jackscrews.
NOTE: If compliance to environmental legislation is not required, this step will notbe used. Example: MD25F59R7NT6X
-
11DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MDX SERIES
D-SubPositronic Industriesconnectpositronic.com
INDUSTRIAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
MATERIALS AND FINISHES:Insulator: Glass filled polyester per ASTM D5927, UL
94V-0, blue color.Contacts: Precision machined copper alloy. Contact Plating: Professional performance Gold flash over
nickel plate. Other finishes available uponrequest.
Shells: Steel with tin plate; zinc plate with chromateseal, stainless steel passivated. Other materials and finishes available uponrequest.
Mounting Spacers and Brackets: Nylon; copper alloy or steel with zinc plate
and chromate seal or tin plate; phosphorbronze with tin plate; stainless steel, passivated; polyester.
Push-On Fasteners: Phosphor bronze or beryllium copper withtin plate.
Jackscrew Systems: Brass or steel with zinc plate and chromateseal or clear zinc plate or tin plate; stainlesssteel, passivated.
Vibration Lock Systems: Slide lock and lock tabs, steel with nickelplate.
Hoods: Composite and plastic, UL 94V-0; brass orsteel with zinc plate and chromate seal.Aluminum; aluminum with electroless nickelplate. For aluminum hoods, zinc content is1% maximum. Die cast zinc.
Low magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:Fixed Contacts: Size 20 contact, female contact - PosiBand
closed entry design, see page 1 for details.Contact Retention
In Insulator: 6 lbs. [27N]
MDX SERIES TECHNICAL CHARACTERISTICS
Size 20 Contacts, Fixed
PosiBand® Closed Entry
IEC Publication 60807-2Performance Level One
Consult Technical Sales for UL Recognition
MDX series connectors are industrial quality connectorsrecommended for use in sheltered, non-corrosive indoor oroutdoor environments having normal ventilation, but withouttemperature or humidity controls. These fixed contact connectors meet the dimensional and performance requirements of IEC 60807-2, Performance Level One.
MDX series connectors utilize precision machined contactswhich are fixed within the connector body. The female utilizesPositronic’s unique PosiBand closed entry contact system,see page 1 for details.
Five standard connector variants are offered in arrangementsof 9, 15, 25, 37 and 50 contacts. Each variant is available with
contact terminations for solder cup and straight and right angle(90°) printed board mount terminations. MDX series connectorsare mateable and compatible with all D-subminiature connectorsconforming to IEC 60807-2, IEC 60807-3 and MIL-DTL-24308.
A wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock.
Contact Solder cup contacts - 0.042 inch [1.06mm] Terminations: minimum hole diameter for 20 AWG
[0.5mm2] wire maximum.Straight Printed Board Mount - 0.028 inch[0.71mm] termination diameter.Right Angle (90°) Printed Board Mount -0.028 inch [0.71mm] termination diameterfor all printed board footprints.
Polarization: Trapezoidally shaped shells and polarizedjackscrews.
Mounting To Jackscrews and riveted fasteners with a Angle Brackets: 0.120 inch [3.05mm] clearance hole, and
threaded riveted fasteners with 4-40 threadsand polyster lock inserts.
Mounting To Printed Board: Rapid installation push-on fasteners andthreaded posts.
Locking Systems: Jackscrews and vibration locking systems.Mechanical Operations: 1000 operations minimum per IEC 60512-5.
ELECTRICAL CHARACTERISTICS:Contact Current Rating, Tested per UL 1977:
18 amperes, 2 contacts energized.14 amperes, 6 contacts energized.11 amperes, 15 contacts energized.10 amperes, 25 contacts energized.9 amperes, 50 contacts energized.
See temperature rise curves on page 2 for details.
Initial Contact Resistance: 0.004 ohms maximum.
Insulator Resistance: 5 G ohms.Proof Voltage: 1000 V r.m.s.Clearance and CreepageDistance [minimum]: 0.039 inch [1.0mm].Working Voltage: 300 V r.m.s.
CLIMATIC CHARACTERISTICS:Temperature Range: -55°C to +125°C.Damp Heat, Steady State: 10 days.
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant For RoHS optionssee page 15.
-
12DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MDX
SER
IES
D-SubPositronic Industries
connectpositronic.com
INDUSTRIAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
11 10 9 817 1619 18
19 18
15 14 1213 67 5 4 3 2 111 10 9 817 16 15 14 1213 67 5 4 3 2 1
30 29 28 2736 3537 34 33 3132 2526 24 23 22 21 20
30 29 28 2733 3132 2526 24 23 22 21 20
35 3446 45 44 434950 4748 4142 40 39 38 37 36
6789
5 124 3
91012131415 11
678 12345
25
13 12
1415161718192122 202324
67891011 1245 3
28
19 18
29 23
14 13
27 62 52
17 16 15
24 2022 21
1112
3 2 16 5 49 8 710
C A
E
B
D
K M
G
H
0.220 [5.59] Max.
10° Typ.
0.120±0.010 [3.05±0.25]
0.032 [0.81] Total diametral float
Ø0.086 +0.005 -0.000 [ Ø2.18 +0.13 -0.00 ] Mounting hole, two places
0.036±0.008 [0.91±0.20]
0.050±0.010 [1.27±0.25]
for stainless steel shell (0 option)
two places (02 option)
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places
Ø0.154 [3.91] Mounting hole,
CONTACT VARIANTSFACE VIEW OF FEMALE
MDX 9 MDX 15 MDX 25
MDX 29 MDX 37 MDX 50
STANDARD SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY WITH UNIVERSAL FLOAT MOUNTS (F)OPTIONAL SHELL ASSEMBLY (0, 02)
CONNECTORVARIANT SIZES
A±0.015[0.38]
B±0.005[0.13]
C±0.005[0.13]
D±0.005[0.13]
E±0.015[0.38]
G±0.010[0.25]
H±0.010[0.25]
K±0.005[0.13]
M±0.010[0.25]
9 S1.213[30.81]
0.643[16.33]
0.984[24.99]
0.311[7.90]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
15 S1.541[39.14]
0.971[24.66]
1.312[33.32]
0.311[7.90]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.243[6.17]
0.429[10.90]
25 S2.088[53.04]
1.511[38.38]
1.852[47.04]
0.311[7.90]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
37 S2.729[69.32]
2.159[54.84]
2.500[63.50]
0.311[7.90]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.243[6.17]
0.429[10.90]
50 S2.635[66.93]
2.064[52.43]
2.406[61.11]
0.423[10.74]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.243[6.17]
0.429[10.90]
-
13DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MDX SERIES
D-SubPositronic Industriesconnectpositronic.com
INDUSTRIAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
Specify code 4in step 4 of
ordering information 0.112 [2.84] Typ.
D
0.112 [2.84] Typ.0.112 [2.84] Typ.
D
1 2 3 4 5 6 7 8 9 10 11 12
1918171614 15 252423222120
Numbering shown is rear view of female.
C
AB
±0.008[0.20]jackscrews
female Fixed
Ø0.125[3.18]Typ.
Ø0.028 [0.71]
0.170 [4.32]Nominal
13
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATIONCODE 4, 0.450 [11.43] CONTACT EXTENSION
Typical Part Number: MDX25S4B0T20
Typical Part Number:MDX50S4B0T20
MDX**4**** 0.450 [11.43] CONTACT EXTENSION
MDX50S4****2.626[66.70]
2.406[61.11]
0.562[14.27]
0.450[11.43]
PART NUMBER A*1 B C D
MDX9S4****1.204[30.58]
0.984[24.99]
0.506[12.85]
0.450[11.43]
MDX15S4****1.532[38.91]
1.312[33.32]
0.506[12.85]
0.450[11.43]
MDX25S4****2.072[52.63]
1.852[47.04]
0.506[12.85]
0.450[11.43]
MDX37S4****2.720[69.09]
2.500[63.50]
0.506[12.85]
0.450[11.43]
Swaged spacer with push-on fastener phosphor bronze
Fixed female jackscrews
ØD
0.225 [5.71]
L
0.010 [0.25] NOMINAL
0.352 [8.94]
20 AWG max.
[0.5 mm ]
0.135 [3.43]
2
Fixed female jackscrews
Fixed male
jackscrew
Fixed female
jackscrew
Typical Part Number: MDX15S200T6ZTypical Part Number: MDX15S200T2Z
Typical Part Number: MDX25S3S60T0
Fixed male and female polarized jackscrews available.Specify code T6 in step 7 of ordering information.
For solder cup contacts, specify code 2 in step 4
of ordering information.
For straight printed board mount contacts, specify code number in
step 4 of ordering information.
SOLDER CUP TERMINATIONCODE 2
CODENUMBER
L ØD
3 0.170 [4.32] 0.028 [0.71]
32 0.375 [9.53] 0.028 [0.71]
33 0.500 [12.70] 0.028 [0.71]
STRAIGHT PRINTED BOARD MOUNT TERMINATIONCODE 3, 32 AND 33
*1
NOTE:
*1 “A” dimension applies formetal angle brackets only.Consult Accessories D-subminiature catalog for“A” dimension when plasticbrackets are used.
-
14DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MDX
SER
IES
D-SubPositronic Industries
connectpositronic.com
INDUSTRIAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
0.216 [5.49] 0.108 [2.74]
Typ.
0.162 [4.11]
0.054 [1.37] Typ.
Sym. 0.656 [16.66] 0.378 [9.60]
0.324 [8.23]
0.108 [2.74] Typ.
0.054 [1.37] Typ.
0.926 [23.52] 0.652 [16.56] Sym. Sym.
0.109 [2.77] Typ.
0.598 [15.19]
0.055 [1.40] Typ.
1.250 [31.75] 0.978 [24.84]
0.924 [23.47]
0.055 [1.40] Typ.
0.109 [2.77] Typ.
Sym. 1.203 [30.56]
0.870 [22.10]
0.109 [2.77] Typ.
0.055 [1.40] Typ.
Sym.
0.815 [20.70]
0.492 [12.50]
0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.224[5.69]
0.112 [2.84]
RIGHT ANGLE (90°) AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERNMOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW.
MDX9 MDX15 MDX25
MDX50MDX37
SUGGESTED PRINTEDBOARD HOLE SIZES:
Suggest 0.045 [1.14] Ø hole for contacttermination positions.
Suggest 0.123 ±0.003 [3.12 ±0.08] Øhole for mounting connector with push-on fasteners.
0.112 [2.84] Typ.
0.112 [2.84] Typ.
D
jackscrews female Fixed B
±0.008 [0.20]
A
C
Specify code 5 in step 4 of
ordering information D
0.112 [2.84] Typ.
Numbering shown is rear view of female.
0.170 [4.32] Nominal
Ø0.028 [0.71]
14 20 19 18 17 16 15
1 7 8 6 5 4 3 2
25 24 23 22 21
13 12 11 10 9
Push-on fastener beryllium copper
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATIONCODE 5, 0.283 [7.19] CONTACT EXTENSION
MDX**5**** 0.283 [7.19] CONTACT EXTENSION
PART NUMBER A*1 B C D
MDX9S5****1.204[30.58]
0.984[24.99]
0.339[8.61]
0.283[7.19]
MDX15S5****1.532[38.91]
1.312[33.32]
0.339[8.61]
0.283[7.19]
MDX25S5****2.072[52.63]
1.852[47.04]
0.339[8.61]
0.283[7.19]
MDX37S5****2.720[69.09]
2.500[63.50]
0.339[8.61]
0.283[7.19]
MDX50S5****2.626[66.70]
2.406[61.11]
0.395[10.03]
0.283[7.19]
Typical Part Number:MDX50S5R4NT2X
Typical Part Number:MDX25S5R4NT2X
*1
NOTE:
*1 “A” dimension applies formetal angle brackets only.Consult Accessories D-subminiature catalog for“A” dimension when plasticbrackets are used.
-
15DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
MDX SERIES
D-SubPositronic Industriesconnectpositronic.com
INDUSTRIAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
*1 For additional information on accessories listed in steps 5, 6 and 7,see Accessory Catalog.
*2 Ferrite inductor is available on contact types 32, 33, 4, 59 and 6 only.For more information on ferrite inductors, see page 7.
*3 VL, V3 and V5 locking systems are not available for connector variants37 and 50. Jackscrews are highly recommended to minimize damageto contacts on variants with high mating forces.
*4 Consult technical sales for availability.
ORDERING INFORMATION - CODE NUMBERING SYSTEMSpecify Complete Connector By Selecting An Option From Step 1 Through 8
STEP 3 - CONNECTOR GENDER
S - Female - Industrial LevelPosiBand closed entry contacts
1 2 3 4 5 6 7 8 9
MDX 25 S 5 R7 N T6 X /AA
10
-14
STEP 1 - BASIC SERIESMDX series. STEP 10 - SPECIAL OPTIONS
-14 - 0.000030 [0.76µ] gold overnickel.
-15 - 0.000050 [1.27µ] gold overnickel.
CONTACT TECHNICAL SALES FOR SPECIAL OPTIONS
STEP 8 - Shell Options0 - Zinc plated, with chromate seal.S - Stainless steel, passivated.X - Tin plated.Z - Tin plated and dimpled (male connectors only).
*1 STEP 6 - HOODS AND PUSH-ON FASTENERS
0 - None.J - Hood, Top Opening, Plastic.L - Hood, Side Opening, Plastic.Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.
Available in size 50 only.Y6 - Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 50 only.Z - Hood, Top or Side Opening, Robust and Extended Height,
Composite and Plastic with Rotating Male Jackscrews. Availablein size 9, 15, 25, 37, and 50 only.
H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only.G - Hood, EMI/RFI, Die Cast Zinc. Available in size 9, 15, 25, 37, and
50 only.AN - Lightweight Aluminum Hood, nickel finish.AC - Lightweight Aluminum Hood, no finish.W - Hood, Top or Side Opening, Plastic. Available in size 9, 15, and 25
only. N - Push-on fastener for right angle (90°) mounting brackets.
*2 F - Ferrite inductor.*2 Q - Ferrite inductor for use with push-on fastener and right angle (90°)
mounting brackets.
*1 STEP 5 - MOUNTING STYLE0 - Mounting Hole, 0.120 [3.05] Ø.02 - Mounting Hole, 0.154 [3.91] Ø.B - Bracket, Mounting, Right Angle (90°) Metal.B3 - Bracket, Mounting, Right Angle (90°) Metal with Cross Bar.B7 - Bracket, Mounting, Right Angle (90°) Plastic.B8 - Bracket, Mounting, Right Angle (90°) Plastic with Cross Bar.F - Float Mounts, Universal.P - Threaded Post, Brass, 0.225 [5.71] Length.P2 - Threaded Post, Nylon, 0.225 [5.71] Length.R - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews.R2 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews withCross Bar.
R3 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 0.120 [3.05] Ø Mounting Hole.
R4 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Threads.
R5 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Locknut.
R6 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 0.120 [3.05] Ø Mounting Hole with Cross Bar.
R7 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Threads with Cross Bar.
R8 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Locknut with Cross Bar.
S - Swaged Spacer, 4-40 Threads, 0.225 [5.71] Length.S2 - Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.S5 - Swaged Locknut, 4-40 Threads.S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.225
[5.71] Length.S7 - Swaged Spacer with Push-on Fastener for use with Ferrite
Inductor, 4-40 Threads, 0.375 [9.53] Length.
STEP 4 - CONTACT TERMINATION TYPE2 - Solder cup.3 - Solder, Straight Printed Board Mount with 0.170
[4.32] Tail Length.*4 32 - Solder, Straight Printed Board Mount with 0.375
[9.52] Tail Length.*4 33 - Solder, Straight Printed Board Mount with 0.500
[12.70] tail length.*4 4 - Solder, Right Angle (90°) Printed Board Mount
with 0.450 [11.43] Contact Extension.5 - Solder, Right Angle (90°) Printed Board Mount
with 0.283 [7.19] Contact Extension.
STEP 2 - CONNECTOR VARIANTS9, 15, 25, 37, 50
STEP
EXAMPLE
STEP 9 - ENVIRONMENTAL COMPLIANCEOPTIONS
/AA - Compliant per EU Directive2002/95/EC (RoHS)
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant
*1 STEP 7 - LOCKING AND POLARIZING SYSTEMS
0 - None.*3 V3 - Lock Tab, connector front panel mounted.*3 V5 - Lock Tab, connector rear panel mounted.*3 VL - Lock Lever, used with Hoods only.
T - Fixed Female Jackscrews.T2 - Fixed Female Jackscrews.T6 - Fixed Male and Female Polarized Jackscrews.E - Rotating Male Jackscrews.
E2 - Rotating Male Screw Locks.E3 - Rotating Male with Internal Hex for 3/32 Hex DrivesE6 - Rotating Male and Female Polarized Jackscrews.
NOTE: If compliance to environmental legislation is not required, this step will notbe used. Example: MDX25S5R7NT6X
-
Contact Solder cup contacts - 0.042 inch [1.06mm] Terminations: minimum hole diameter for 20 AWG
[0.5mm2] wire maximum.Straight Printed Board Mount - 0.024 inch[0.61mm] termination diameter.Right Angle (90°) Printed Board Mount -0.024 inch [0.61mm] termination diameterfor European Metric Footprints.
Shells: Male shells may be dimpled for EMI/ESDground paths.
Polarization: Trapezoidally shaped shells and polarizedjackscrews.
Mounting To Jackscrews and riveted fasteners with a Angle Brackets: 0.120 inch [3.05mm] clearance hole, and
threaded riveted fasteners with 4-40 threadsand polyster lock inserts.
Mounting To Rapid installation push-on fasteners andPrinted Board: threaded posts.
Locking Systems: Jackscrews and vibration locking systems.Mechanical Operations: 500 operations minimum per IEC 60512-5.
ELECTRICAL CHARACTERISTICS:Contact Current Rating: 7.5 amperes nominal.Initial Contact
Resistance: 0.008 ohms maximum.Insulator Resistance: 5 G ohms.Proof Voltage: 1000 V r.m.s.Clearance and CreepageDistance [minimum]: 0.039 inch [1.0mm].Working Voltage: 300 V r.m.s.
CLIMATIC CHARACTERISTICS:Temperature Range: -55°C to +125°C.Damp Heat, Steady State: 10 days.
16DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ED S
ERIE
S
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
MATERIALS AND FINISHES:Insulator: Nylon resin, UL 94V-0, black color.Contacts: Precision machined copper alloy.Contact Plating: Professional performance Gold flash over
nickel plate. Other finishes available uponrequest.
Shells: Steel with tin plate; zinc plate with chromateseal, stainless steel passivated. Other mate-rials and finishes available upon request.
Mounting Spacers and Brackets: Nylon; copper alloy or steel with zinc plate
and chromate seal or tin plate; phosphorbronze with tin plate; stainless steel, passivated; polyester.
Push-On Fasteners: Phosphor bronze or beryllium copper withtin plate.
Jackscrew Systems: Brass or steel with zinc plate and chromateseal or clear zinc plate or tin plate; stainlesssteel, passivated.
Vibration Lock Systems: Slide lock and lock tabs, steel with nickelplate.
Hoods: Composite and plastic, UL 94V-0; brass orsteel with zinc plate and chromate seal.Aluminum; aluminum with electroless nickelplate. For aluminum hoods, zinc content is1% maximum. Die cast zinc.
Low magnetic versions are available, contact Technical Sales.
MECHANICAL CHARACTERISTICS:Fixed Contacts: Size 20 contact, male - 0.040 inch [1.02mm]
mating diameter. Female contact - ruggedopen entry design.
Contact RetentionIn Insulator: 6 lbs. [27N]
Resistance To Solder 500°F [260°C] for 10 seconds duration per Iron Heat: IEC 60512-6.
EURO-D SERIES TECHNICAL CHARACTERISTICS
Size 20 Contacts, FixedEuropean Standard
Printed Circuit Board LayoutIEC Publication 60807-2Performance Level Two
UL Recognized CSA RecognizedFile #E49351 File #LR54219
TelecommunicationUL File #14098
Euro-D series connectors are professional quality connectorsrecommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. These fixed contact connectors meet the dimensional and performance requirementsof IEC 60807-2, Performance Level Two.
Euro-D series connectors utilize precision machined contactswhich are fixed within the connector body. The female contact isan open entry design contact, precision machined of high tensilephosphor bronze.
Six standard connector variants are offered in arrangements of9, 15, 25, 29, 37 and 50 contacts. Each Euro-D connector variantis available with contact terminations for solder cup, wrap post and
straight and right angle (90°) printed board mount terminations perstandard European metric footprints. Euro-D series connectors aremateable and compatible with all D-subminiature connectors conforming to IEC 60807-2, IEC 60807-3 and MIL-DTL-24308.
A wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock.
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant For RoHS optionssee page 20.
-
17DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ED SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
222120
31 2
2423 26 2725 3028 29 32 3331
654 87 1211109 1413
3634 35 37
171615 1918
383534 3736 39 40 4341 42
5
18 20 2119
21 43
242322 272625
76 1098
45 4644 4947 48 50
333028 29 3231
131211 161514 17
9876
1 542 3
15141211109 13
321 87654
14
1 2
2524232221201817 191615
876543 1312109 11
21
11 12
20
21
26
1716
242322
13 14 15
25 2927 28
1918
76543 1098
C
A
E
BB1
DD1
K
MG
H
0.220 [5.59]
Max.
10° Typ.
0.120±0.010 [3.05±0.25]
0.032 [0.81]Total diametral float
Ø0.086+0.005-0.000 [Ø2.18+0.13-0.00]Mounting hole, two places
0.036±0.008
[0.91±0.20]
0.050±0.010
[1.27±0.25]
for stainless steel shell (0 option)
two places (02 option)
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places
Ø0.154 [3.91] Mounting hole,
CONTACT VARIANTSFACE VIEW OF MALE OR REAR VIEW OF FEMALE
ED 9 ED 15 ED 25
ED 29 ED 37 ED 50
STANDARD SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY WITH UNIVERSAL FLOAT MOUNTS (F)OPTIONAL SHELL ASSEMBLY (0, 02)
CONNECTORVARIANT SIZES
A±0.015[0.38]
B±0.005[0.13]
B1±0.005[0.13]
C±0.005[0.13]
D±0.005[0.13]
D1±0.005[0.13]
E±0.015[0.38]
G±0.010[0.25]
H±0.010[0.25]
K±0.005[0.13]
M±0.010[0.25]
9 M1.213[30.81]
0.666[16.92]
0.984[24.99]
0.329[8.36]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.233[5.92]
0.422[10.72]
9 F1.213[30.81]
0.643[16.33]
0.984[24.99]
0.311[7.90]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
15 M1.541[39.14]
0.994[25.25]
1.312[33.32]
0.329[8.36]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.233[5.92]
0.422[10.72]
15 F1.541[39.14]
0.971[24.66]
1.312[33.32]
0.311[7.90]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.243[6.17]
0.429[10.90]
25 M2.088[53.04]
1.534[38.96]
1.852[47.04]
0.329[8.36]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.230[5.84]
0.426[10.82]
25 F2.088[53.04]
1.511[38.38]
1.852[47.04]
0.311[7.90]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
29 M1.770[44.96]
1.274[32.36]
1.534[38.96]
0.450[11.43]
0.605[15.37]
1.322[33.58]
0.539[13.69]
0.217[5.51]
0.426[10.82]
29 F1.770[44.96]
1.251[31.78]
1.534[38.96]
0.431[10.95]
0.605[15.37]
1.322[33.58]
0.539[13.69]
0.237[6.02]
0.429[10.90]
37 M2.729[69.32]
2.182[55.42]
2.500[63.50]
0.329[8.36]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.230[5.84]
0.426[10.82]
37 F2.729[69.32]
2.159[54.84]
2.500[63.50]
0.311[7.90]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.243[6.17]
0.429[10.90]
50 M2.635[66.93]
2.079[52.81]
2.406[61.11]
0.441[11.20]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.230[5.84]
0.426[10.82]
50 F2.635[66.93]
2.064[52.43]
2.406[61.11]
0.423[10.74]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.243[6.17]
0.429[10.90]
-
Specify code 42or 52 in step 4 of
ordering informationD
0.100 [2.54] Typ.for code 42
contacts
0.112 [2.84] Typ.for code 52
contacts
D
713 12 11 10 9 8
2021222325 24
6 5 4 3 2 1
141516171819
Numbering shown is rear view of male and face
view of female.
C
AB
±0.008[0.20]jackscrews
female Fixed
Ø0.125[3.18]Typ.
0.100 [2.54] Typ.for code 42 contacts
0.112 [2.84] Typ.for code 52 contacts
0.100 [2.54] Typ.for code 42 contacts
0.112 [2.84] Typ.for code 52 contacts
Ø0.024 [0.60]
0.197 [5.01]Max.
18DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ED S
ERIE
S
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATIONCODE 42 AND 52, 0.370 [9.40] CONTACT EXTENSION
Typical Part Number:ED25M42B0T2X
Typical Part Number:ED50M52B0T2X
ED**(42 or 52)**** 0.370 [9.40] CONTACT EXTENSION
ED50*(42 or 52)****2.626[66.70]
2.406[61.11]
0.470[11.94]
0.370[9.40]
PART NUMBER A*1 B C D
ED9*(42 or 52)****1.204[30.58]
0.984[24.99]
0.420[10.67]
0.370[9.40]
ED15*(42 or 52)****1.532[38.91]
1.312[33.32]
0.420[10.67]
0.370[9.40]
ED25*(42 or 52)****2.072[52.63]
1.852[47.04]
0.420[10.67]
0.370[9.40]
ED29*(42 or 52)****1.754[44.55]
1.534[38.96]
0.470[11.94]
0.370[9.40]
ED37*(42 or 52)****2.720[69.09]
2.500[63.50]
0.420[10.67]
0.370[9.40]
Swaged spacer with push-on fastener phosphor bronze
Fixed female jackscrews
ØD
0.225 [5.71]
L
0.010 [0.25] NOMINAL
Typical Part Number: ED25F36S60T0
0.352 [8.94]
20 AWG max.
[0.5 mm ]
0.135 [3.43]
2
Fixed female jackscrews
Fixed male
jackscrew
Fixed female
jackscrew
Typical Part Number: ED15M200T6ZTypical Part Number: ED15M200T2Z
Fixed male and female polarized jackscrews available.Specify code T6 in step 7 of ordering information.
For solder cup contacts, specify code 2 in step 4
of ordering information.
STRAIGHT PRINTED BOARD MOUNT TERMINATIONCODE 36
For straight printed board mount contacts, specify code number in
step 4 of ordering information.
CODENUMBER
L
360.236[5.99]
ØD
0.024[0.61]
SOLDER CUP TERMINATIONCODE 2
*1
NOTE:
*1 “A” dimension applies formetal angle brackets only.Consult Accessories D-subminiature catalog for“A” dimension when plasticbrackets are used.
-
SUGGESTED PRINTED BOARD HOLE SIZES:Suggest 0.040 [1.02] Ø hole for contact termination positions.Suggest 0.123 ±0.003 [3.12 ±0.08] Ø hole for mounting connector with push-on fasteners.
19DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ED SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
0.216 [5.49]
0.108 [2.74]
Typ.
0.162 [4.11]
0.054 [1.37]
Typ.
Sym. 0.656
[16.66]0.378 [9.60]
0.324 [8.23]
0.108 [2.74]
Typ.
0.054 [1.37]
Typ.
0.926 [23.52] 0.652 [16.56]
Sym. Sym.
0.109 [2.77]
Typ.
0.598 [15.19]
0.055 [1.40]
Typ.
1.250 [31.75] 0.978 [24.84]
0.924 [23.47]
0.055 [1.40]
Typ.
0.109
[2.77]
Typ.
Sym.1.203
[30.56]
0.870
[22.10]
0.109
[2.77]
Typ.
0.055 [1.40]
Typ.
Sym.
0.815 [20.70]
Sym.0.432
[10.97]
0.767
[19.48]
0.054
[1.37]
Typ.0.486
[12.34]
0.108 [2.74]
Typ.
0.492
[12.50]
X X X
X
Y
X
Y
X
RIGHT ANGLE (90°) AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERNFOR CODE 42 AND 52 CONTACTS, MOUNT CONNECTOR WITH MATING FACE POSITIONED TO FOLLOW DIRECTION OF ARROW.
FOR CODE 44 CONTACTS, MOUNT CONNECTOR WITH MATING FACE POSITIONED TO OPPOSE DIRECTION OF ARROW.
ED9 ED15 ED25
ED50ED37ED29
0.100 [2.54] Typ.0.100 [2.54] Typ.
D
jackscrews female Fixed B
±0.008[0.20]
A
C
Specify code 44in step 4 of
ordering informationD
2425 23 22
13 12 11 10
21 20 19 18
9 8 67 5
17 16 15 14
4 3 2 1
Numbering shown is rear view of male and face view of female.
Push-on fastenerberyllium copper
0.100 [2.54]Typ.
Ø0.024 [0.60] 0.197 [5.01] Max.
Typical Part Number:ED25M44B0NT2X
Typical Part Number: ED29M44B0NT2X
RIGHT ANGLE (90°) PRINTED BOARD MOUNT TERMINATIONCODE 44, 0.370 [9.40] CONTACT EXTENSION
ED**44**** 0.370 [9.40] CONTACT EXTENSION
ED50*44****2.626[66.70]
2.406[61.11]
0.470[11.94]
0.370[9.40]
PART NUMBER A*1 B C D
ED9*44****1.204[30.58]
0.984[24.99]
0.420[10.67]
0.370[9.40]
ED15*44****1.532[38.91]
1.312[33.32]
0.420[10.67]
0.370[9.40]
ED25*44****2.072[52.63]
1.852[47.04]
0.420[10.67]
0.370[9.40]
ED29*44****1.754[44.55]
1.534[38.96]
0.470[11.94]
0.370[9.40]
ED37*44****2.720[69.09]
2.500[63.50]
0.420[10.67]
0.370[9.40]
CODE NUMBER
X Y
36 0.112 [2.84] 0.224 [5.69]
42 0.100 [2.54] 0.200 [5.08]
44 0.100 [2.54] 0.200 [5.08]
52 0.112 [2.84] 0.224 [5.69]
*1
NOTE:
*1 “A” dimension applies formetal angle brackets only.Consult Accessories D-subminiature catalog for“A” dimension when plasticbrackets are used.
-
20DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
ED S
ERIE
S
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYFIXED CONTACT
STANDARD DENSITY D-SUBMINIATURE
*1 For additional information on accessories listed in steps 5, 6 and 7,see Accessory Catalog.
*2 Ferrite inductor is available on contact types 36 only. For more infor-mation on ferrite inductors, see page 7.
*3 VL, V3 and V5 locking systems are not available for connector vari-ants 37 and 50. Jackscrews are highly recommended to minimizedamage to contacts on variants with high mating forces.
*4 For stainless steel dimpled male versions contact Technical Sales.*5 AN and AC hood are not available for connector variant 29. Consult
Technical Sales for availability.
ORDERING INFORMATION - CODE NUMBERING SYSTEMSpecify Complete Connector By Selecting An Option From Step 1 Through 8
STEP 3 - CONNECTOR GENDER
M - Male F - Female
1 2 3 4 5 6 7 8 9
ED 9 M 36 0 0 0 0 /AA
10
-14
STEP 1 - BASIC SERIESED series.
STEP 10 - SPECIAL OPTIONS
-14 - 0.000030 [0.76µ] gold overnickel.
-15 - 0.000050 [1.27µ] gold overnickel.
CONTACT TECHNICAL SALES FOR SPECIAL OPTIONS
STEP 8 - Shell Options0 - Zinc plated with chromate seal.
*4 S - Stainless steel, passivated.X - Tin plated.Z - Tin plated and dimpled (male connectors only).
*1 STEP 6 - HOODS AND PUSH-ON FASTENERS
0 - None.J - Hood, Top Opening, Plastic.L - Hood, Side Opening, Plastic.Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.
Available in size 50 only.Y6 - Hood, Top Opening, Plastic with Rotating Male and Female
Polarized Jackscrews. Available in size 50 only.Z - Hood, Top or Side Opening, Robust and Extended Height,
Composite and Plastic with Rotating Male Jackscrews.Available in size 9, 15, 25, 37, and 50 only.
H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and50 only.
G - Hood, EMI/RFI, Die Cast Zinc. Available in size 9, 15, 25, 37,and 50 only.
*5 AN - Lightweight Aluminum Hood, nickel finish.*5 AC - Lightweight Aluminum Hood, no finish.
W - Hood, Top or Side Opening, Plastic. Available in size 9, 15,and 25 only.
N - Push-on Fastener, for Right Angle (90°) Mounting Brackets.*2 F - Ferrite inductor.*2 Q - Ferrite inductor for use with Push-on Fastener and Right
Angle (90°) Mounting Brackets.
*1 STEP 5 - MOUNTING STYLE0 - Mounting Hole, 0.120 [3.05] Ø.02 - Mounting Hole, 0.154 [3.91] Ø.B - Bracket, Mounting, Right Angle (90°) Metal.B3 - Bracket, Mounting, Right Angle (90°) Metal with Cross Bar.B7 - Bracket, Mounting, Right Angle (90°) Plastic.B8 - Bracket, Mounting, Right Angle (90°) Plastic with Cross Bar.F - Float Mounts, Universal.P - Threaded Post, Brass, 0.225 [5.71] Length.P2 - Threaded Post, Nylon, 0.225 [5.71] Length.R - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews.R2 - Bracket, Mounting, Right Angle (90°) Metal, Swaged to
Connector with 4-40 Thread Fixed Female Jackscrews withCross Bar.
R3 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 0.120 [3.05] Ø Mounting Hole.
R4 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Threads.
R5 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Locknut.
R6 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 0.120 [3.05] Ø Mounting Hole with CrossBar.
R7 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Threads with Cross Bar.
R8 - Bracket, Mounting, Right Angle (90°) Metal, Swaged toConnector with 4-40 Locknut with Cross Bar.
S - Swaged Spacer, 4-40 Threads, 0.225 [5.71] Length.S2 - Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length.S5 - Swaged Locknut, 4-40 Threads.S6 - Swaged Spacer with Push-on Fastener,
4-40 Threads, 0.225 [5.71] Length.S7 - Swaged Spacer with Push-on Fastener for use with Ferrite
Inductor, 4-40 Threads, 0.375 [9.53] Length.
STEP 4 - CONTACT TERMINATION TYPE2 - Solder cup.36 - Solder, Straight Printed Board Mount with 0.236
[5.99] Tail Length.42 - Solder, Right Angle (90°) Printed Board Mount with
0.370 [9.40] Contact Extension.44 - Solder, Inverted Right Angle (90°) Printed Board
Mount with 0.370 [9.40] Contact Extension.52 - Solder, Right Angle (90°) Printed Board Mount with
0.370 [9.40] Contact Extension.
STEP 2 - CONNECTOR VARIANTS9, 15, 25, 29, 37, 50
STEP
EXAMPLE
STEP 9 - ENVIRONMENTAL COMPLIANCEOPTIONS
/AA - Compliant per EU Directive2002/95/EC (RoHS)
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant
*1 STEP 7 - LOCKING AND POLARIZING SYSTEMS
0 - None.*3 V3 - Lock Tab, connector front panel mounted.*3 V5 - Lock Tab, connector rear panel mounted.*3 VL - Lock Lever, used with Hoods only.
T - Fixed Female Jackscrews.T2 - Fixed Female Jackscrews.T6 - Fixed Male and Female Polarized Jackscrews.E - Rotating Male Jackscrews.
E2 - Rotating Male Screw Locks.E3 - Rotating Male with Internal Hex for 3/32 Hex DrivesE6 - Rotating Male and Female Polarized Jackscrews.
NOTE: If compliance to environmental legislation is not required, this step will notbe used. Example: ED9M360000
-
MATERIALS AND FINISHES:Insulator: Glass filled nylon resin, UL 94V-0, black
color.
Contacts: Precision machined copper alloy.
Contact Plating: Professional performance - gold flash overnickel plate. Other finishes available uponrequest.
Shells: Steel with tin plate; zinc plate with chro-mate seal, stainless steel passivated.Other materials and finishes availableupon request.
Mounting Spacers: Nylon; copper alloy or steel with zincplate and chromate seal or tin plate;phosphor bronze with tin plate; stainlesssteel, passivated.
Push-On Fasteners: Phosphor bronze with tin plate.
Jackscrew Systems: Brass or steel with zinc plate and chro-mate seal or clear zinc plate or tin plate;stainless steel, passivated.
Vibration Lock Systems: Slide lock and lock tabs, steel with nickelplate.
Hoods: Composite and plastic, UL 94V-0; brass orsteel with zinc plate and chromate seal.Aluminum; aluminum with electroless nickelplate. For aluminum hoods, zinc content is1% maximum. Die cast zinc.
Low magnetic versions are available, contact Technical Sales.
CLIMATIC CHARACTERISTICS:Temperature Range: -55°C to +125°C.
Damp Heat, Steady State: 10 days.
21DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
SD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL QUALITYREMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
SOLI-D SERIES TECHNICAL CHARACTERISTICSMECHANICAL CHARACTERISTICS:Removable Contacts: Insert contact to rear face of insulator and
release from rear face of insulator. Size 20contacts, male - 0.040 inch [1.02mm]mating diameter. Female - Robi-D contactopen entry design.
Contact RetentionIn Insulator: 6 lbs. [27 N].
Contact Terminations: Closed barrel crimp, wire sizes 18 AWG[1.0mm2] through 32 AWG [0.03mm2].Straight printed board mount terminations.
Shells: Male shells may be dimpled for EMI/ESDground paths.
Polarization: Trapezoidally shaped shells and polar-ized jackscrews.
Printed Board Mount: Rapid installation push-on fasteners.
Locking Systems: Jackscrews and vibration locking systems.
Mechanical Operations: 500 operations minimum per IEC60512-5.
ELECTRICAL CHARACTERISTICS:Contact Current Rating: 7.5 amperes nominal.
Initial Contact Resistance: 0.008 ohms maximum.
Proof Voltage: 1000 V r.m.s.
Insulator Resistance: 5 G ohms.
Clearance and CreepageDistance [minimum]: 0.039 inch [1.0mm].
Working Voltage: 300 V r.m.s.
Size 20 Contacts,Removable
IEC Publication 60807-3Performance Level Two
UL Recognized CSA RecognizedFile #E49351 File #LR54219
TelecommunicationUL File #14098
Soli-D series connectors are professional quality connectorsrecommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. This crimp removable contactconnector will meet the Performance Level Two requirements ofIEC 60807-3.
Soli-D series connectors utilize precision machined contactswith closed barrel, crimp terminations. The female contact features the Robi-Contact open entry design. Other contact terminations such as solder cup and printed board terminationsare also available. The removable contact feature provides forrapid assembly and permits contact repairs or wiring changes.
Five standard contact variants are offered in arrangements of9, 15, 25, 37 and 50 contacts. Soli-D series connectors are mateable and compatible with all D-subminiature connectorsconforming to IEC 60807-2, IEC 60807-3 and MIL-DTL-24308.
A wide assortment of cable support hoods and locking systems is available from stock.
PO
SI T
RON IC INDUSTR
IES
• per EU Directive 2002
/9
5/EC
•
RoHS RoHS
Compl iant For RoHS optionssee page 26.
-
22DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
SD S
ERIE
S
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYREMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
222120
31 2
2423 26 2725 3028 29 32 3331
654 87 1211109 1413
3634 35 37
171615 1918
383534 3736 39 40 4341 42
5
18 20 2119
21 43
242322 272625
76 1098
45 4644 4947 48 50
333028 29 3231
131211 161514 17
9876
1 542 3
15141211109 13
321 87654
14
1 2
2524232221201817 191615
876543 1312109 11
CONTACT VARIANTSFACE VIEW OF MALE OR REAR VIEW OF FEMALE
SD 9 SD 15 SD 25
SD 37 SD 50
STANDARD SHELL ASSEMBLY
CONNECTORVARIANT SIZES
A±0.015[0.38]
B±0.005[0.13]
B1±0.005[0.13]
C±0.005[0.13]
D±0.005[0.13]
D1±0.005[0.13]
E±0.015[0.38]
G±0.010[0.25]
H±0.010[0.25]
K±0.005[0.13]
M±0.010[0.25]
SD 9 M1.213[30.81]
0.666[16.92]
0.984[24.99]
0.329[8.36]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.233[5.92]
0.422[10.72]
SD 9 F1.213[30.81]
0.643[16.33]
0.984[24.99]
0.311[7.90]
0.494[12.55]
0.759[19.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
SD 15 M1.541[39.14]
0.994[25.25]
1.312[33.32]
0.329[8.36]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.233[5.92]
0.422[10.72]
SD 15 F1.541[39.14]
0.971[24.66]
1.312[33.32]
0.311[7.90]
0.494[12.55]
1.083[27.51]
0.422[10.72]
0.243[6.17]
0.429[10.90]
SD 25 M2.088[53.04]
1.534[38.96]
1.852[47.04]
0.329[8.36]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.230[5.84]
0.426[10.82]
SD 25 F2.088[53.04]
1.511[38.38]
1.852[47.04]
0.311[7.90]
0.494[12.55]
1.625[41.28]
0.422[10.72]
0.243[6.17]
0.429[10.90]
SD 37 M2.729[69.32]
2.182[55.42]
2.500[63.50]
0.329[8.36]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.230[5.84]
0.426[10.82]
SD 37 F2.729[69.32]
2.159[54.84]
2.500[63.50]
0.311[7.90]
0.494[12.55]
2.272[57.71]
0.422[10.72]
0.243[6.17]
0.429[10.90]
SD 50 M2.635[66.93]
2.079[52.81]
2.406[61.11]
0.441[11.20]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.230[5.84]
0.426[10.82]
SD 50 F2.635[66.93]
2.064[52.43]
2.406[61.11]
0.423[10.74]
0.605[15.37]
2.178[55.32]
0.534[13.56]
0.243[6.17]
0.429[10.90]
C
A
E
BB1
DD1
K
MG
H
0.437 [11.10]
Max.
10° Typ.
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places
0.036±0.008
[0.91±0.20]
two places (02 option)Ø0.154 [3.91] Mounting hole,
Ø0.120±0.005 [Ø3.05±0.13] Mounting hole, two places for stainless steel shell (0 option) [
Mounting hole, two places
Total diametral float0.032 [0.81]
Ø0.086+0.005-0.000
0.120±0.010 [3.05±0.25]
+0.13-0.00Ø2.18 ]
0.050±0.010
[1.27±0.25]
OPTIONAL SHELL ASSEMBLY WITH UNIVERSAL FLOAT MOUNTS (F)OPTIONAL SHELL ASSEMBLY (0, 02)
-
0.927 [23.55]Ø0.086
[2.18]
0.915 [23.25]
0.170
[4.32]
Ø0.055
[1.40]0.170
[4.32]
Ø0.040
[1.02]
Ø0.086
[2.18]
Ø0.055
[1.40]
23DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
SD SERIES
D-SubPositronic Industriesconnectpositronic.com
PROFESSIONAL QUALITYREMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
PLATING:STANDARD FINISH: Gold flash over nickel plate.OPTIONAL FINISHES: 0.000030 [0.76 µ] gold over nickel by adding “-14” suffix onto part number. Example: FC7520D-14
0.000050 inch [1.27µ] gold over nickel by adding “-15” suffix onto part number. Example: MC7526D-15
øC
øB
A
Ø0.040
[1.02]øB
øC
0.170
[4.32]
A
0.170
[4.32]
FEMALE CONTACT MALE CONTACT
PART NUMBER WIRE SIZEAWG/[mm2]
A ØB ØC
FC7520D20 / 22 / 24
[0.5/0.3/0.25]0.612[15.54]
0.045[1.14]
0.066[1.68]
FC7526D26 / 28 / 30
[0.12/0.08/0.05]0.612[15.54]
0.026[0.66]
0.066[1.68]
PART NUMBER WIRE SIZEAWG/[mm2]
A ØB ØC
MC7520D20 / 22 / 24
[0.5/0.3/0.25]0.618[15.70]
0.045[1.14]
0.066[1.68]
MC7526D 26 / 28 / 30
[0.12/0.08/0.05]0.618[15.70]
0.026[0.66]
0.066[1.68]
Note: *C75**D contacts can not be used in the RD series.
REMOVABLE CRIMP CONTACTSCODE 1 AND 12
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
FEMALE CONTACT MALE CONTACT
MC7518DFC7518D
PLATING:STANDARD FINISH: Gold flash over nickel plate.OPTIONAL FINISHES: 0.000030 [0.76 µ] gold over nickel by adding “-14” suffix onto part number. Example: FC7518D-14
0.000050 inch [1.27µ] gold over nickel by adding “-15” suffix onto part number. Example: MC7518D-15
F o r i n f o r m a t i o n r e g a r d i n g C R I M P T O O L S & C R I M P I N G T O O L T E C H N I Q U E S , s e e p a g e 7 8 .
The crimp area of this contact is not protected when fully seated in the connectormolding. These contacts require shrink tubingafter installation. Wire cannot be removedfrom molding after insertion. Not suitable forfully loaded connector.
REMOVABLE CRIMP CONTACTS18 AWG CRIMP CONTACTS
18 AWG [1.0mm2]
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
Note: Connectors can be kitted withall applicable crimp contacts,contact Technical Sales for connector part number.
Note: Connectors can be kitted withall applicable crimp contacts,contact Technical Sales for connector part number.
-
24DIMENSIONS ARE IN INCHES [MILLIMETERS].ALL DIMENSIONS ARE SUBJECT TO CHANGE.
SD S
ERIE
S
D-SubPositronic Industries
connectpositronic.com
PROFESSIONAL QUALITYREMOVABLE CONTACT
STANDARD DENSITY D-SUBMINIATURE
STRAIGHT PRINTED BOARD MOUNT TERMINATIONCODE 3 AND 32
L Nominal
Fixed female jackscrews Swaged spacer with
push-on fastener phosphor bronze.
0.437 [11.10]
0.024 [0.61]
For straight printed boardmount contacts specify
code number in Step 4 ofordering information. Typical Part Number:
SD37F3S60T2X
CODENUMBER
L
30.125[3.18]
320.188[4.78]
Connectors Designed To Customer SpecificationsP o s i t ro n i c D - s u b m i n i a t u r e c o n n e c t o r s
c a n b e m o d i f i e d t o c u s t o m e r s p e c i f i c a t i o n s . Examples: select loading of cont