7/28/2019 Reverse Dial Horiz One Dial

1/1

using one dial

EXTENDER DIAL CLAMP

DIAL

1

5

2 3 4 OUTBOARD LEG

INBOARD LEG

set dial from motor to pump coupling

measure distance from motor dial leg center to pump coupling center 2

measure distance from motor dial leg center to motor inboard foot bolt center 3

measure distance from inboard foot bolt center to outboard foot bolt center 4

treat pump coupling like looking at a watch mark 12 ,3,6,9 oclock position

zero set 12 oclock of pump coupling

turn pump shaft clock wise or anticlockise 90 degree,note turn clockwise position 3 oclock,anti, 9 0clock

put the reading at appropriate position,do all position on pump coupling

position the dial stand on pump side to measure motor couplingtake all readings for motor coupling, remember to look the coupling like a watch,12,3,6,9 oclock

horizontal values only, 3.9 for both couplings

12 12

9 3 9 3

6 6

let's say pump -5 and +13, motor +7 and -11

pump offset -5+13=+8, motor +7-11=-4

.

pump left + - motor left

- . +

pump+8/2 5.5 notch

4 8 notchmotor -4 /2

-2

scale dial offset 1 sq =1 notch

adjust 5.5 notch to left at 1st leg and

8 notch at 2nd leg

I notch = dial gauge scale

PUMP MOTOR

pump motor