reservoir engineering for geosciences professionals and other disciplines

RESERVOIR ENGINEERING FOR GEOSCIENCES PROFESSIONALS & OTHER DISCIPLINES

19 – 23 October 2015 | Brisbane | Australia

Your Expert Course Faculty

Wim Swinkels Wim Swinkels is a seasoned Petroleum Engineering professional, with global experience, mostly in Shell companies and joint ventures (NAM, SSB, SCL, PDO, SKDBV). He has been involved in reserves and resource management, has extensive reservoir modelling and reservoir simulation expertise, and a wide experience in design and delivery of training programmes and staff development.

What past learners have to say about this training: - “Fantastic course. Wim Swinkel is very knowledgeable and a great speaker. Perfect combination of practical and theory – based learning”. Graduate Geologist, Woodside Energy

“From a non-technical background I would highly recommend this course as a means of introduction to the key concepts defining reservoir engineering” Planning Upstream, PETRONAS Australia

“Wim’s extensive industry experience enabled real life examples to be discussed in the more difficult concepts of Reservoir Engineering” Principal Resource Geologist, BHP Billiton Mitsui Coal

“Very effective & highly recommended course for all those people who deals with oil & gas asset management” DGM Oprerations, Cairn India

“Compact, concise and easy to understand lectures. Easily relate back to own discipline” Petrophysicist, Sarawak Shell

“Concise and very good course for non-RE” Senior Exploration Geologist, Brunei National Petroleum Company

www.petroEDGEasia.net

Conduct this training course in-house for more effective savings! Call us at +65 6741 9927 or email to [email protected]. For more information, visit us at www.petroedgeasia.net

RESERVOIR ENGINEERING FOR GEOSCIENCES PROFESSIONALS AND OTHER DISCIPLINES 19 – 23 October 2015 | Brisbane | Australia

Course Objectives The objective of reservoir engineering is to optimise hydrocarbon recovery. This 5 day course will introduce reservoir engineering concepts and methods to enable cross-disciplinary exchange of ideas and experience. In this course, the fundamental concepts and modern practical reservoir engineering methods are addressed together with practical and actual field problems to illustrate relevant subjects.

At the end of this course, participants will understand the physics of oil and gas fields, and have an awareness of modern reservoir engineering principles and practices for reservoir development and production, including the estimation of oil and gas reserves.

By Attending this 5-day Training Course, you will be able to: Develop subsurface skills for integrated analysis of rocks, pore and fluids

Solve problems associated with identifying and exploiting reserves

Understand various methods applied to predict reservoir performance and to enhance recovery

Apply tools for analysis of the underlying uncertainty and assumptions used in many reservoir analysis techniques

Understand various processes for solving reservoir engineering problems and analyses

Predict reservoir performance and to determine recoverable reserves using different techniques.

Gain sufficient knowledge about various recovery methods from primary to exotic enhanced recoveries.

Understand the role of petroleum economics in evaluating reservoir development project.

Who should attend This course is applicable for professionals with prior technical or engineering exposure to exploration and production activities. Targeted participants include new Reservoir Engineers, Production Engineers, Petrophysicists, Geologists involved with exploration and development of oil & gas reservoirs. The course is also useful for Petroleum Engineering team leaders, IT staff and support staff working with reservoir engineering, development and production departments. 5-Day Course Outline

DAY 1 Reservoir Rock and Volumes Course Introduction Reservoir rock properties, permeability

and fluid flow Distribution of hydrocarbon fluids, fluid

gradients and contacts Volumetric Oil in Place and Gas in Place

calculations (STOIIP and GIIP) Reserves basic principles

- Exercise

DAY 2 Fluid Behaviour and Material Balance Fluid properties of oil and gas,

composition and phase behaviour Oil Material Balance and Drive

Mechanisms Gas Material Balance and applications

- Exercise

DAY 3 Well Behaviour and Well Tests Radial flow Well, inflow performance, skin Oil well testing, Pressure Draw Down and Build Up analysis Gas well testing Decline Curve Analysis, Production

forecasting - Exercise

DAY 4 Recovery and Sweep Relative permeability and capillary

pressure, movable oil Displacement and Recovery, sweep,

heterogeneity Reservoir development

- Exercise

DAY 5 Reservoir Modelling Reservoir Simulation – Basic Principles Fractured reservoirs Special topics, case studies ( EOR, etc.) Quiz and conclusion

Testimonials from past sessions

“This course has a good mix of theory and exercises” Production

Technology Engineer Sarawak Shell

“The course is a good overall course for non-reservoir

engineers” Senior Seismic Interpreter, Sarawak Shell

“Compact, concise and easy to understand lectures. I can easily

related back to my own discipline” Petrophysicist,

Sarawak Shell

“This is thorough introduction to reservoir engineering that

covered all the points and still manahged to include learnings

on the maths involved and examples” Geophysicist,

Hand H Geophysical Pty Ltd

“Excellent instructor. Lots of knowledge and experience. This course is well designed in terms

of the contents” COP

“I would highly recommended this course to both geologists and

engineers as it is a logical presentation with real- life

examples.” Petroleum Engineer, NOPTA

“Very useful course for non RE background” HSSE & Eng Lead,

Petroleum Brunei

“Good mix of theory and

exercise” Production Technology,

Sarawak Shell

“A very good, broad introduction to reservoir engineering. The

course presenter was very knowledgeable and well

prepared.” Geologist, CSIRO

For more information and

testimonials about this training, visit us at

www.petroedgeasia.net

mailto:[email protected]

http://www.petroedgeasia.net/



About your Expert Trainer: Wim Swinkels

Wim Swinkels is a seasoned Petroleum Engineering professional, with global experience, mostly in Shell companies and joint ventures (NAM, SSB, SCL, PDO, SKDBV). He has been involved in reserves and resource management, has extensive reservoir modelling and reservoir simulation expertise, and a wide

experience in design and delivery of training programmes and staff development.

PROFESSIONAL EXPERIENCE

2008 – 2012 Shell International E&P, the Hague, the Netherlands Senior Reserves Consultant for the Middle East Region Assurance of SEC and SPE compliance of reserves and resources in Shell Middle East region. Contributor to the 2012 SPE guidelines on reserves and resources assessment. 2006 – 2008 Shell E&P Technology Solutions, Rijswijk, the Netherlands Reservoir Engineering Discipline Lead Responsible for QA/QC of Reservoir Engineering in global E&P projects as well as for staff development. (over 60 international Reservoir Engineers) 2001 – 2005 Centre for Carbonate Studies, SQU, Oman / Shell International E&P Technology Applications and Research /Shell Representative Office Oman Petroleum Engineering Manager PE manager in the Carbonate Research centre, at Sultan Qaboos University in Oman. Industrial research projects and support to teaching on recovery aspects of carbonate reservoir development. Design and delivery of industrial courses on carbonate reservoirs 1997– 2000 Shell International E&P, Rijswijk, the Netherlands Principal Reservoir engineer. Acting Shell Group Reserves Co-ordinator in 1997-1998. Facilitation of workshops with government shareholders, including discussions on sensitive reserves issues (BSP Petroleum Unit Brunei, PDO Oman, SPDC government Nigeria). Co-ordination of the NOV subsurface team in Shell Kazakhstan Development BV in 2000. Leading role in Shell Gamechanger project on natural gas hydrates. 1992– 1996 Shell Training Centre, Noordwijkerhout, the Netherlands Reservoir Engineering Programme Training Director Directed Shell Group Reservoir Engineering Training. Introduced advanced PE training events, QA/QC and learning transfer measures, Design and delivery of reservoir engineering and multidiscipline courses to Shell staff from a wide range of nationalities. 1985– 1992 Shell International, SIPM, the Hague, The Netherlands Senior Reservoir Engineer Full field reservoir simulation projects supporting Field Development Plans, operational strategies and unitisation negotiations for Shell Group Operating Companies in the United Kingdom, New Zealand and Egypt. Major contributor to the Shell internal Gas Field Planning Tool development. 1984– 1985 Geological Survey of the Netherlands (RGD), Ministry of Economic Affairs Reservoir Engineering Section Head Responsible for Petroleum Engineering advice on oil and gas licences to the Ministry of Economic Affairs. First hand experience with a government view on resource management




EARLY BIRD NORMAL TEAM DISCOUNTS

BRISBANE | AUSTRALIA 19 – 23 October 2015

USD 4,599 USD 4,799

petroEDGE recognises the value of learning in teams.

Group bookings at the same time from the same company receive the following: 3 or more at 5% off 5 or more at 7% off 8 of more at 10%

All other promotions including early bird are exclusive of the group discount.

DELEGATE DETAILS

Delegate 1 Please note - Indicate if you have already registered by Phone +Fax +Email +Web - If you have not received an acknowledgement before the training

course, please call us to confirm your booking. - Photocopy this form to register multiple delegates.

PAYMENT METHODS By Cheque/ Bank Draft Make Payable to Asia Edge Pte. Ltd.

By Direct Transfer Please quote your invoice number with the remittance advise Account Name: Asia Edge Pte. Ltd. Bank Number: 508 Account Number: 762903-001 Swift Code: OCBCSGSG

All bank charges to be borne by payer. Please ensure that Asia Edge Pte Ltd receives the full invoiced amount.

PAYMENT POLICY Payment is due in full at the time of registration. Full payment is mandatory for event attendance. By submitting this registration form, you have agreed to Asia Edge Pte Ltd’s payment terms

CANCELLATIONS & SUBSTITUTIONS You may substitute delegates at any time. ASIA EDGE PTE LTD does not provide refunds for cancellations. For cancellations received in writing more than seven (7) days prior to the training course you will receive a 100% credit to be used at another ASIA EDGE PTE LTD training course for up to one year from the date of issuance. For cancellations received seven (7) days or less prior to an event (including day 7), no credits will be issued. In the event that ASIA EDGE PTE LTD cancels an event, delegate payments at the date of cancellation will be credited to a future ASIA EDGE PTE LTD event. This credit will be available for up to one year from the date of issuance. In the event that ASIA EDGE PTE LTD postpones an event, delegate payments at the postponement date will be credited towards the rescheduled date. If the delegate is unable to attend the rescheduled event, the delegate will receive a 100% credit representing payments made towards a future ASIA EDGE PTE LTD event. This credit will be available for up to one year from the date of issuance. No refunds will be available for cancellations or postponements.

ASIA EDGE PTE LTD is not responsible for any loss or damage as a result of a substitution, alteration or cancellation/postponement of an event. ASIA EDGE PTE LTD shall assume no liability whatsoever in the event this training course is cancelled, rescheduled or postponed due to a fortuitous event, Act of God, unforeseen occurrence or any other event that renders performance of this training course impracticable or impossible. For purposes of this clause, a fortuitous event shall include, but not be limited to: war, fire, labor strike, extreme weather or other emergency.

PROGRAM CHANGE POLICY Please note that speakers and topics were confirmed at the time of publishing; however, circumstances beyond the control of the organizers may necessitate substitutions, alterations or cancellations of the speakers and/or topics. As such, ASIA EDGE PTE LTD reserves the right to alter or modify the advertised speakers and/or topics if necessary. Any substitutions or alterations will be updated on our web page as soon as possible.

This brochure may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form in whole or in part without prior written approval of ASIA EDGE PTE LTD

ASIA EDGE PTE. LTD. Company Registration No: No. 200710561C Copyright@ 2005 ASIA EDGE PTE LTD. All rights reserved.

Mr Ms Mrs Dr Others:

Name :

Job Title :

Department :

Telephone No. :

Email :

Delegate 2

Mr Ms Mrs Dr Others:

Name :

Job Title :

Department :

Telephone No. :

Email :

Company :

Address :

Country : Postcode:

Attention Invoice to :

Telephone No. :

Fax No. :

4 EASY WAYS TO REGISTER Online: www.petroedgeasia.net Email: [email protected] Phone: +65 6741 9927 Fax: +65 6747 8737

RESERVOIR ENGINEERING FOR GEOSCIENCES PROFESSIONALS & OTHER DISCIPLINES

R E G I S T R A T I O N F O R M
