report draft 1 - tectnet.unisannio.it 2.4 report lecturer selection.pdf · usarb mariana spatari...
TRANSCRIPT
Technological Transfer Network Project
(Project number: 544197–TEMPUS–1–2013–1–
IT–TEMPUS-JPHES)
WP2, D2.4
Lecturer selection
REPORT DRAFT 1
Project Number: 544197–TEMPUS–1–2013–1–IT–TEMPUS-JPHES
Project Acronym: TecTNet
Result: WP2 – Master programme realisation
Deliverable number and title: D2.4 – Lecturer selection
Type of deliverable: Report
Required date of delivery: December 22, 2014
Date of last version delivery: January 14, 2016
Work package: WP2 Master programme realisation
Lead responsible partner: TUKE
Responsible person: Ján Šaliga
Other cooperating partners: UNISANNIO, IST, TUIASI, TUM, SAUM, USM, USARB,
MTTN, AITT, AGEPI,
Total number of pages: 41
Content
1. Introduction ..................................................................................................................................... 1
2. The requirements and the selected teachers ................................................................................. 2
2.1. Selected teacher and their characteristics .............................................................................. 2
2.1.1. Technology Management ................................................................................................ 3
2.1.2. Intellectual Property Law and Management ................................................................... 5
2.1.3. Data Processing ............................................................................................................... 8
2.1.4. Applied Statistics ........................................................................................................... 11
2.1.5. Applied Psychology, Communication Techniques, and Human Resources Management
14
2.1.6. Strategic Management .................................................................................................. 16
2.1.7. European Project Design and Management ................................................................. 18
2.1.8. Innovation and Technological Transfer ......................................................................... 21
2.1.9. Modern Technologies and Engineering Innovation ...................................................... 23
2.1.10. IT Tools and Technology for Innovation ........................................................................ 25
2.1.11. Marketing and Business Administration ....................................................................... 28
2.1.12. Quality Management ..................................................................................................... 31
2.1.13. Philosophy of Science .................................................................................................... 32
2.1.14. Business Culture ............................................................................................................ 33
2.1.15. Applied English .............................................................................................................. 34
2.1.16. Business Law .................................................................................................................. 35
3. Detailed calendar of lessons and activities ................................................................................... 37
4. Conclusions .................................................................................................................................... 38
1
1. Introduction
This document describes the applied procedure for lecturer selection for preparation study materials
and direct teaching within deployment of master course programme in pilot run. The detailed
calendar of lessons and activities of master programme is also a part of this report.
The master course programme is composed by 12 basic modules according to the approved TEMPUS
TecTNet project. The detailed description of modules can be found in the report “Master programme
structure and content design”. Each learning module is managed by one teacher selected among the
consortium staff: 2 teachers from each EU partner university, and 4 teachers from the MD agencies
(AGEPI, MTTN, AIIT). The learning modules are composed of the following didactical elements: (i)
frontal lessons; (ii) e-learning lessons; (iii) home work; (iv) internships; (v) visits; (vi) team projects;
(vii) intermediate evaluations; and (viii) examinations. In particular, about the internship for the 12
non-staff trainees is scheduled a trip of one month at the EU partners’ sites. For the 8 staff trainees
the training activities will continue as described in work package related to the setup of the OTTs.
The selected managing teachers coordinate the preparation of study materials in cooperation with
teachers from associated project partners as it was agreed during the first consortium meeting. The
teachers dedicated for particular modules also realise the direct teaching as it is scheduled in agreed
calendar of the lessons and activities of the master programme.
2
2. The requirements and the selected teachers
The selection process of teachers managing the particular modules was distributed among all project
partners. The distribution of modules among the partners was performed and agreed during the first
consortium meeting together with requirements on quality and professionalism of selected teachers.
The basic requirements are:
Pedagogical qualification: full or associated professor. Exclusion can be applied for teacher from TT agencies
Scientific qualification: the selected teacher must be active in research in the given or similar fields. The scientific quality must be proofed by a list of selected publications (5 the most important publications from last 6 years, papers in current content journal are preferred) and the list of scientific project from last 6 years. Exclusion can be applied for teacher from TT agencies: here a proof of experience and skill in the given field is required.
Recognition of the professional community: the selected teacher must me recognised by the professional community. It must be proofed by:
o number of citation registered by Web of Science higher than 25, or o membership of editorial board of international journals, or technical o other international or national recognition forms, such as memberships in
international professional organisations, e.g., IEEE, scientific boards, technical committee of international conferences, etc.
2.1. Selected teacher and their characteristics The list of selected teachers for particular modules from project partner institution are summarised
in Table 1.
Table 1. The list of selected teachers for particular modules
Module title Partner 1 Teacher name Partner 2 Teacher name
Technology Management TUIASI Dorin LUCACHE
SAUM Aurelia LITVIN
Intellectual Property Law and Management
AGEPI Ion TIGANAS Iurie BADAR Andrei MOISEI Petru GROSU
USARB Mariana SPATARI
Data Processing IST Helena Maria G. RAMOS
USM Victor CIOBU
Applied Statistics IST Artur RIBEIRO TUM Ilie NUCA
Applied Psychology, Communication Techniques, and Human Resources Manageme
SANNIO Francesco VESPASIANO
USARB Valentina PRITCAN
Strategic Management AGEPI Iurie BADAR USM Marian JALENCU
European Project Design and Management
TUIASI Cristian-Győző HABA
SAUM Andrei ZBANCA
Innovation and Technological Transfer
AITT Natalia SUDITU Vadim
USM Marian JALENCU
3
IATCHEVICI
Modern Technologies and Engineering Innovation
TUKE Linus MICHAELI
USARB Pavel TOPALA
IT Tools and Technology for Innovation
TUKE Ján ŠALIGA TUM Andrei CHICUC
Marketing and Business Administration
SANNIO Angelo REVIEZZO
SAUM Aurelia LITVIN
Quality Management MTTN & AITT
Igor PLĂMĂDEALĂ Veronica EȘANU
TUM Iuliu ȚURCAN
Philosophy of Science* USM - - -
Business Culture SAUM Aurelia LITVIN
- -
Applied English TUM Stela GUVIR - -
Business Law USARB Corneliu VRABIE
- -
*Not applied in pilot run
The characteristics of teachers from Table 1 are in the following subchapters of this report.
2.1.1. Technology Management
The responsible partners: TUIASI + SAUM
The teacher from TUIASI: Dorin LUCACHE (prof. Ing. DrSc.) is full professor at „Gheorghe Asachi”
Technical University of Iasi, Romania. His teaching activities at home university are focused on
various utilizations of the electric energy, low voltage electrical installations, management of the
public lighting and related areas. He has rich experience in basic technology management first as
field engineer in an enterprise with more than 2000 employees, then he graduated a two-year post-
university master program in business administration. His main research interests are focused on
electric lighting and heating, electric networks, but also different automotive applications (hybrid and
electric vehicles etc.). He has rich experiences in cooperation with industry especially trying to build
links between the faculty and several companies or SMEs acting in automotive or lighting sector.
Selected publications from last 6 years
Rakotomalala L.F.F., Zely R., Kebe F.C.M., Danila E., Lucache D.D., „High energy saving for Africa
street lighting using individual automatic dimming of HID ballasts”, EPE 2014 - Proceedings of the
2014 International Conference and Exposition on Electrical and Power Engineering, Publisher IEEE,
2014, DOI: 10.1109/ICEPE.2014.6969996, Pages 683-688.
Lucache D.D., Moisa C., Lobry J., „Economic apraisal of optimal location and sizing of capacitors in
radial distribution systems using PSO”, ICATE 2014, Applied and Theoretical Electricity, IEEE
Conference, 23-25 Oct. 2014, Publisher IEEE, DOI 10.1109/ICATE.2014.6972626, pp.1-6
E.Danila, D.D.Lucache, „Cost effectiveness of growing plant lighting system”, Journal of Electrical
Engineering vol. 13 no.4, 2013, pg. 224-230, ISSN 1582-4594 (IEE INSPEC, SCOPUS Index, impact
factor 0.967).
4
Dorin Lucache, Gabriel Chiriac, Dan Ioachim, “Quick estimation of the electric efficiency and power
factor for crucible induction furnaces", 13th International Conference on Optimization of Electrical
and Electronic Equipment (OPTIM), 24-26 May 2012, DOI: 10.1109/OPTIM.2012.6231947, Pub. Year:
2012, pg. 95 – 102
D.Lucache, A.Bulgaru, D.Ioachim, E.Dănilă, On electro-dewatering a cellulosic sludge, Environmental
Engineering and Management Journal, March/April 2009, Vol.8, No.2, pp.267-271, ISSN 1582-9596 (
5-Year ISI Impact factor 0.806)
Number of citations according to Web of science: 22
Membership in editorial boards:
Member of editorial board of „Tehnica Instalațiilor (Installations Technique)” ISSN: 1582-6244 (2007 -
2014);
Managing editor of Bulletin of Iasi Polytechnic Institute, Electrical engineering, Energetics and
Electronics Section, (2004 – 2008).
Member of:
IEEE Industry Applications Soc. #85012847, EAI (European Alliance for Innovation) member of Green
World SIB, "Autoclusters" Association, AGIR (Romanian Engineers' Association) and CETR (Technical
Experts Council of Romania)
Teacher from SAUM: LITVIN Aurelia (Doctor habilitatus) is full professor at State Agrarian University
of Moldova. Her teaching activities at home university are focused on management, financial
management, production management. She has rich experience in basic and applied research and
development with technology and innovation transfer to agro food sectors. Her main research areas
are: management of promoting agricultural exports, methodology of impruving the production
tehnology, financial management, business administration. She has rich experiences in cooperation
with entrepreneurs, especially trying to build links between the faculty and several enterprises.
Selected publications from last 6 years:
Litvin A., Prisăcaru V. Ways to penetrate on the foreign market. In: Scientific papers, series
“Management, economic engineering in agriculture and rural development”, University of
Agricultural Sciences and Veterinary Medicine Bucharest, Volume 10(2)/2010, p. 125-129, 0.4 c.a.,
ISSN 1844-5640.
Litvin A. Assessing trends in foreign trade of the Republic of Moldova of involvement conditions of
globalization. In: Scientific Papers, series “Management, Economic Engineering in agriculture and
rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume
11, 2011, p. 92-98, 0.5 c.a., ISSN 2247-3527.
Litvin A., Dobrovolschi L. The effects of globalization on the foreign trade. In: Scientific papers, series
„Management, economic engineering in agriculture and rural development”, University of
Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13, Issue 2/ 2013, p.213-221, 0.5
c.a., E-ISSN 2285-3952.
5
Grinciuc L., Litvin A. Enterpreneurship – a major factor in the development of moldavian economy.
In: Scientific papers, series „Management, economic engineering in agriculture and rural
development”,University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume
13,Issue 2/2013, p.175-181, 0.5 c.a., E-ISSN 2285-3952.
Litvin A. Management promotion food exports - terms and theoretical reflections In: Scientific
papers, series „Management, economic engineering in agriculture and rural development”,University
of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13,Issue 4/2013, p. 189-195, 0.5
c.a., E-ISSN 2285-3952.
Stratan A., Litvin A. Innovotsyony method of forecasting export markets agricultural products in
Moldova. The magazine of innovation "Innovation", Russia, 10(180), October, 2013, 64-68, 0,5c.a.,
ISSN 2071-3010.
Litvin A., Petrascu S. The foreign economic activity - an important factor in sustainable development
of the Republic of Moldova , In: Scientific Papers. Series “Management, Economic Engineering in
Agriculture and Rural Development”, University of Agricultural Sciences and Veterinary Medicine
Bucharest, Volume 14, Issue 3/2014, p. 158-165, 0.5 c.a., E-ISSN 2285-3952.
Principal investigator of scientific projects in last 6 years:
Team Leader of the state project "Improved management promoting food exports under the EU
neighbourhood", 2010-2012.
Chef of the project “Courses for young entrepreneurs from rural sector.” UCIP – IFAD, 2012-2015.
Team Leader of the state project "Sustainable development of the horticultural sector in the context
of economic security of the country." 2015-2016.
Sustainable Development of Rural Areas of the Republic of Moldova in the context of the EU
Neighborhood, institutional project, 2015-2018.
Member of:
Profile of SAUM Scientific Seminar of the specialty 521.03 Economics and management in the activity
field
Profile of AESM Scientific Seminar of the specialty 521.03 Economics and management in the activity
field
2.1.2. Intellectual Property Law and Management
The responsible partners: AGEPI + USARB
The teachers from AGEPI Ion TIGANAS is Deputy Director General of the AGEPI. Mr. Tiganas is Doctor in law with a vast expertise in intellectual property field. He is lecture of intellectual property law in the University of State and University of Sports of the Republic of Moldova. He is teaching IP law within the specialised certified IP courses; participate as an invited speaker to different training and education programs.
6
Selected publications from last 6 years:
ŢÎGANAŞ Ion, Drept civil. Contracte speciale – Chişinău: Ed. AGEPI, 2009, 108 p.(Civil Law. Special Contracts – Chisinau: AGEPI Publishing Department, 2009, 108 p.)
ŢÎGANAŞ Ion, Istoria dreptului de autor în Republica Moldova, Revista Intellectus, nr.2, Chişinău, 2012, p.5-13. (0,64 c.a.). (History of Copyright in the Republic pof Moldova, Intellectus Journal, No.2, Chisinau, 2012, p. 5-13.)
ŢÎGANAŞ Ion, Apariția și dezvoltarea istorică a dreptului de autor, Revista Intellectus, nr.3, Chişinău, 2012, p.12-21. (0,83 c.a.). (Emergence and Historical Development of Copyright, Intellectus Journal, No.3, Chisinau, 2012, p. 12-21.)
ŢÎGANAŞ Ion, Medierea – soluție de alternativă pentru litigiile de proprietate intelectuală, Revista Intellectus, nr.4, Chişinău, 2012, p.9-16. (1,12 c.a.). (Mediation – Alternative Resolution of Intellectual Property Disputes, Intellectus Journal, No.4, Chisinau, 2012, p. 9-16,)
ŢÎGANAŞ Ion, MOGOL Natalia. Raport național privind respectarea drepturilor de proprietate intelectuală în Republica Moldova, 2012, Editura AGEPI, Chişinău, 2013, 65 p. (ISBN 978-9975-911-80-1) – monografie (National Report on the Enforcement of Intellectual Property Rights in the Republic of Moldova, 2012, AGEPI Publishing Department, Chisinau, 2013, 65 p. (ISBN 978-9975-911-80-1) – monograph)
ŢÎGANAŞ Ion, Încălcarea drepturilor de proprietate intelectuală şi rolul observatorului naţional în combaterea acestora, Revista Intellectus, nr.3, Chişinău, 2013, p.6-12. (0,46 c.a.). (Intellectual Property Rights Infringement and the Role of National Observatory in Combatting it, Intellectus Journal, No.3, Chisinau, 2013, p. 6-12 )
ŢÎGANAŞ Ion, Industria creativă sau motorul intelectual al economiei, Revista Intellectus, nr.4, Chişinău, 2013, p.55-63. (0,55 c.a (Creative Industry or the Economic Engine of the Economy, Intellectus Journal, No.4, Chisinau, 2013, p. 55-63.)
Iurie BADAR is head of Economic Division of the State Agency on Intellectuala Property of the Republic of Moldova since 2001. He is Doctor in economy with a vast expertise in economic issues. Mr. Badar is author and co-author of about 50 science publications on economic reforms, privatization and economic development, including IP and innovation. He has been actively involved in the development of the National Intellectual Property Strategy and drafting of innovation strategy. Mr. Badar is lecture of economy and invited speaker at different IP trainings events.
Selected publications from last 6 years:
BADAR Iu, Supraprofiturile monopoliste şi activitatea inovaţională, Conferinţa ştiinţifică internaţională Competitivitatea şi inovarea în economia cunoaşterii(24-25 septembrie 2010) vol. I, Chişinău, 2011, p 161-164. (Monopolistic Over Profits and Innovative Activity, The International Scientific Conference, Competitiveness and Innovation in the Knowledge Economy (September 24th-25th 2010), Volume I, Chisinau, 2911, p. 161-164.)
BADAR Iu. Dimensiuni economice ale dreptului de autor şi drepturilor conexe, Intelectus , nr. 2, 2011, P. 8-14. (Economic Dimensions of Copyright and Related Rights, Intellectus, No.2, 2011, p. 8-14.)
7
БАДЫР Ю., Стрелков О., Чеpнуха А. Рекомендации по усилению инновационной деятености МСП в странах СНГ. Версия 1., Женева, 2010. (coautor)(Recommendations on Strengthening the Innovation Activity of SMEs in CIS countries. Version 1, Geneva, 2010. (co-author))
BADÂR Iu. Conceptele proprietăţii intelectuale şi controversele lor, Lecturi AGEPI, Chişinău, 2010, p. 293-300. (Intellectual Property Concepts and Controversies Thereof, AGEPI Readings, Chisinau, 2010, p.293-300.)
БАДЫР Ю. Факторы препятствующие вовлечению объектов интеллектуальной соственности в экономический оборот в странных с переходной экономикой//Iнтелектуальна власнiсть, 2011, № 3, с. 51-58. (Factors Preventing Inclusion of Intellectual Property Objects in Economic Turnover in Countries with Economies in Transition//Intellectual Property, 2011, No.3, chapters 51-58)
БАДЫР Ю. Выставочный приоритет и льгота по новизне в законодательстве стран СНГ//Интеллектуальная собственность. Промышленная собственность, 2011, № 3, с. 39-48. (Exhibition Priority and Privilege for Novelty in CIS Countries Law//Intellectual Property. Industrial Property, 2011, No.3, chapters 39-48)
БАДЫР Ю. Проблемы и перспективы коммерциализации результатов интеллектуальной деятельности, Тезисы докладов участников Второго международного форума по интеллектуальной собственности ЕХРОРRIORITY 2011, Москва, ЦВК «Экспоцентр», 2011, р 15-17. (Problems and Prospects of Commercialization of Intellectual Activity Results, Abstracts of Reports by Participants of the Second International Forum on Intellectual Property EXPOPRIORITY 2011, Moscow, «Expocentre», 2011, p. 15-17.)
BADAR Iu., Dimensiunea Economică a proprietății Intelectuale, Chisinau, AGEPI, 2014, 320 p. (Economic Dimension of Intellectual Property, Chisinau, AGEPI, 2014, 320 p.)
Andrei MOISEI is Head of the Legal Department of the AGEPI and is employed with AGEPI since 1993. He is responsible for the elaboration and monitoring the IP legal framework, ensures the proper implementation of the legislation. Mr. Moisei is teaching IP law within the specialised certified IP courses; participate as an invited speaker to different training and education programs. He is (co)author of a series of publications in IP law, including a “Practical Guide on intellectual property protection in the Republic of Moldova in the field of applied sciences”.
Petru GROSU is Head of Patent Examination Division of the AGEPI with more than 10 years’ experience in examination patent applications and education in the field of patent protection. Mr. Grosu is teaching the “Protection of invention” module within the AGEPI training course “Counsellor in Intellectual Property” delivered by AGEPI and has been involved in several other projects involving teaching and presentation of patent protection system (both nationally and internationally). He is also responsible for elaboration of proposals for law amendments in the field of patents, development of methodological materials and guidelines in the field.
The teacher from USARB: Mariana SPATARI (PhD, lect. super.) is PhD in Law, full senior lecturer at Alecu Russo Balti State University, Moldova, Department of Law, Faculty of Law and Social Sciences. Her teaching activities at home university are focused on copyright and related rights, intellectual property right. Her main research areas are: the correlation between noncriminal and criminal norms in the sphere of intellectual property, the role of the state in the legal protection of copyright.
Selected publications from last 6 years:
Spatari M. Copyright and other related rights infringement: juridico- criminal aspects, ( co-author), Ch.:Totex-Lux, 2012, 275p.;
8
Spatari M. Objective signs which characterize the constitutive content of the variant-type of copyright and related rights infringement (Article 185/1 para. (1) Penal Code. RM). In: National Journal of Law, No. 1 (124) 2011 January p. 49-54;
Spatari M. Conceptual interpretations on moral (personal non-material) copyright. In: The People’s Advocate no. 7-8, October, 2011, p.12-18, (coauthor);
Spatari M. Benchmarks regarding the correlation between noncriminal and criminal norms in the sphere of intellectual property. In: National Journal of Law, No.12, December 2011;
Spatari M. The role of the state in the legal protection of copyright and other related rights. In: The Annals of Stefan cel Mare Academy of Ministry of Internal Affairs of the Republic of Moldova. Socio-humanistic Sciences, the seventh edition, Chisinau, 2006, p. 140-141;
Spatari M. The intellectual property rights and intellectual property. In: The materials of the international scientific-practical conference The reforms of the legal and institutional framework in the Republic of Moldova through the prism of European practices. Chisinau USEM, ICEŞD, ASM IISD, 2010, p. 147-156;
Spatari M. Copyright and its content interpretation. In: The materials of the international scientific-practical conference the Reforms of the legal and institutional framework in the Republic of Moldova through the prism of European practices. Chisinau USEM, ICEŞD, ASM IISD, 2010, p. 179-194;
Spatari M. The legal object and the material object of the offense of copyright and related rights infringement. In: The materials of the International Scientific Conference of young researchers entitled: The Consolidation and development of rule of law in the context of European integration. The fifth edition. Chisinau: IISD ASM, State Tax Academy of Ukraine, Danibius University in Romania, 31 March 2011;
Principal investigator of scientific projects in last 6 years:
Member of the project team „Ensuring public order and combating crime through the prism of the impact of Ministry of Internal Affairs’ reformation implemented in partnership with Legal and Political Research Institute Academy of Sciences (2011-2014).
2.1.3. Data Processing
The responsible partners: IST + USM
The teacher from TUKE Helena Maria G. Ramos is Associate Professor in Instituto Superior Técnico,
Universidade de Lisboa, Portugal, where she is a member of the teaching staff since 1980. She is a
Senior Researcher at Instituto de Telecomunicações (IT). Her main lines of research include non
destructive testing of conductive materials, PC based instrumentation, transducers, measurement
interfaces, ADC testing and ferromagnetic materials modelling. She was and still is involved in many
research, national and international, projects in these areas. She is author or co-author of 3 book
chapters, 40 scientific papers in international journals and more than 150 conference proceeding
papers. She supervised 3 PhD thesis already concluded, more than 40 Master thesis and internship
supervisions and participated in several national and international academic juries. She has been a
regular peer reviewer in international conferences and journals. She is “senior member“ at the
Institute of Electrical and Electronics Engineers (IEEE), Instrumentation and Measurement Society.
9
Presently, she is Vice-president of IST Scientific Board and as the most significant management
positions that she has already exercised one can refer Member of IST Board of Directors, Vice-
President of the Electrical and Computer Department, Director of IT and Member of the Scientific
Board of the Electrical and Computer Department. She acts regularly as an expert evaluator at FP6
and FP7 RTD Programmes from the European Commission. She is also a member of the evaluator’s
board of R&D projects requiring funding to the national Innovation Agency and of the Italian
Research Assessment Exercise.
Curriculum Vitae at: http://www.it.pt/person_detail_p.asp?ID=478
Selected publications in the last 6 years:
Tiago J. Rocha, Helena G. Ramos, A. Lopes Ribeiro, Dário J. Pasadas, “Magnetic Sensors Assessment in Velocity Induced Eddy Current Testing”, Sensors & Actuators: A. Physical, Elsevier, Vol. 228(2015), pp. 55–61. DOI: 10.1016/j.sna.2015.02.004
Tiago J. Rocha, Helena G. Ramos, A. Lopes Ribeiro, Dário J. Pasadas, “Studies to Optimize the Probe Response for Velocity Induced Eddy Current Testing in Aluminium”, Measurement, Elsevier, vol. 67 (2015), pp. 108-115. DOI: 10.1016/j.measurement.2015.02.003
Helena Geirinhas Ramos, Tiago Rocha, Dário Pasadas, and Artur Lopes Ribeiro, “Defect detection in stainless steel tubes with AMR and GMR sensors using remote field eddy current inspection”, Acta IMEKO, 2015.
Helena Geirinhas Ramos, Tiago Rocha, Jakub Král, Dário Pasadas and Artur Lopes Ribeiro, “An SVM Approach with Electromagnetic Methods to Assess Metal Plate Thickness”, Measurement, vol. 54 (2014), pp. 201-206. Doi: 10.1016/j.measurement.2014.01.035
Ramos, H. G.; Ribeiro, A. L., "Present and Future Impact of Magnetic Sensors in NDE", Procedia Engineering, Vol. 86, No. 1, pp. 406 - 419, November, 2014. doi:10.1016/j.proeng.2014.11.054
Ribeiro, A. L.; Pasadas, D.; Ramos, H. G.; Rocha, T., "Using Excitation Invariance in the Characterization of Defects by Eddy Current Image Constructions", Procedia Engineering, Vol. 86, No. 2014, pp. 440 - 451, November, 2014. doi:10.1016/j.proeng.2014.11.057
Artur Lopes Ribeiro, Tiago Rocha, Dário Pasadas and Helena Geirinhas Ramos, “Remote Field Eddy Current Tube Inspection Using Giant-Magnetoresistance Sensors”, Int. J. Industrial Electronics and Drives, Vol. 1(2014), No. 3, pp.167-173. DOI: 10.1504/IJIED.2014.064093
Helena G. Ramos, Tiago J. Rocha, Dário J. Pasadas, A. Lopes Ribeiro,"Defect Detection With Velocity Induced Eddy Currents Using a Permanent Magnet”; Electromagnetic Nondestructive Evaluation (XVII), IOS Press, vol.39, pp.263-270, 2014. Doi: 10.3233/978-1-61499-407-7-263
A. Lopes Ribeiro, Dário J. Pasadas, Helena G. Ramos, Tiago J. Rocha, “Using Tikhonov Regularization to Determine the Eddy Current Density in a Plate”; Electromagnetic Nondestructive Evaluation (XVII), IOS Press, Vol.39, pp. 347 - 355, 2014.Doi: 10.3233/978-1-61499-407-7-347
Octavian Postolache, Artur Lopes Ribeiro, H. Geirinhas Ramos, “GMR array uniform eddy current probe for defect detection in conductive specimens”, Measurement, vol. 46 (10), pp. 4369-4378, 2013. http://dx.doi.org/10.1016/j.measurement.2013.06.050
Kral, J.; Smid, R.; Ramos, H.M.G.; Ribeiro, A.L., “The Lift-Off Effect in Eddy Currents on Thickness Modeling and Measurement”, IEEE Transactions on Instrumentation and Measurement, Vol. 62, NO. 7, pp. 2043-2047, 2013. DOI : 10.1109/TIM.2013.2247713
10
H. G. Ramos, T. Rocha, D. Pasadas, A. L. Ribeiro, “Faraday Induction Effect Applied to the Detection of Defects in a Moving Plate”, 39th Annual Review of Progress in Quantitative Nondestructive Evaluation, AIP Conf. Proc. 1511, pp. 1490-1497, 2012. DOI: 10.1063/1.4789218
A. Lopes Ribeiro, H. Geirinhas Ramos, D. J. Pasadas, T. J. Rocha, “Eddy Current Mapping Inside a Plane Conductor with Flaws”, 39th Annual Review of Progress in Quantitative Nondestructive Evaluation, AIP Conf. Proc. 1511, pp. 428-435, 2012. DOI: 10.1063/1.14789079
A. Lopes Ribeiro, H. Geirinhas Ramos, J. Couto Arez, “Liftoff Insensitive Thickness Measurement of Aluminum Plates Using Harmonic Eddy Current Excitation and a GMR Sensor”, Measurement, vol. 45, Iss. 9 (2012), pp. 2246-2253. http://dx.doi.org/10.1016/j.measurement.2012.04.025
Dário Pasadas, T. Jorge Rocha, Helena Geirinhas Ramos, A. Lopes Ribeiro, “Evaluation of Portable ECT Instruments with Positioning Capability”, Measurement, Elsevier, vol. 45, Iss. 3 (2012), pp. 393-404. http://dx.doi.org/10.1016/j.measurement.2011.11.005.
Joaquín del Río, Daniel Toma, Shahram Shariat-Panahi, Antoni Mànuel, Helena Geirinhas Ramos “Precision timing in ocean sensor systems”, Meas. Sci. Technol., IOP Publishing, Vol. 23, Nº2 (2012), Article Nr. 025801 doi:10.1088/0957-0233/23/2/025801
M. Corrado, L. De Vito, H.Ramos, J.Šaliga, “Hardware and software platform for ADCWAN remote laboratory”, Measurement, Elsevier, Vol. 45, Iss. 4 (2012), Pages 795–807. doi:10.1016/j.measurement.2011.12.003
A. Lopes, O. Postolache, H. M. Geirinhas Ramos, “A Simple Forward Direct Problem Solver for Eddy Current Non-destructive Inspection of Aluminium Plates Using Uniform Field Probes”, Measurement, Elsevier, vol. 45, Iss. 2 (2012), pp. 213-217. doi:10.1016/j.measurement.2011.03.029
Principal investigator of scientific projects in last 6 years:
“Interoperability and implementation of autonomous marine platforms for seismic monitoring (INTMARSIS)” with the reference CGL2013-42557-R, PROYECTOS DE I+D+I, DEL PROGRAMA ESTATAL DE INVESTIGACIÓN, DESARROLLO E INNOVACIÓN ORIENTADA A LOS RETOS DE LA SOCIEDAD (2013), (Spain).
“Kernel Method Applied to Non Destructive Evaluation” (EvalTubes), finnanced by the Fundação para a Ciência e Tecnologia PEst-OE/EEI/LA0008/2013. Start: 6/2013.
The teacher from the USM: Victor Ciobu (senior lecturer) is full professor at Moldova State University
(USM). His teaching activities at the university are: Introduction to data bases, SQL, Designing
relational data bases, Oracle Designer, Computer Associates Erwin, Develop data bases applications,
Oracle PL/SQL, Data bases administration, Oracle DB Server, Informational security, Date Transport
Networks designing and implementing. He research interests are focused on elaborations of adaptive
web-applications in complex systems and management. He has rich experiences in IT cooperation
between State institutions and Private sector which are linked with technology transfer and
innovations.
Selected publications from last 6 years:
Ciobu V. Elaboration of National adaptive information system for automatization process of vehicle`s technical testing, Scientific journal of the Moldova State University "Studia Universitatis Moldaviae" (Informatics series), No. 2 (82) 2015 pp.3-9.
11
Ciobu V., Paladi F., Căpăţână Gh. Adaptive Information System "Determining the own status of fullerene molecules”, Scientific journal of the Moldova State University "Studia Universitatis Moldaviae" (Informatics series), nr.2(82) 2015, pp.10-15.
Ciobu V. Distributed adaptive information system for the management of technical testing of automobiles. MITRE-2015. CECMI. p.92-94. – ISBN 978-9975-71-678-9.
Ciobu V., Paladi F. Synchronization of distributed databases. MITRE-2015. CECMI. p.94-95. – ISBN 978-9975-71-678-9.
Ciobu V. Adaptive applications for physical systems research and resource management, National Scientific Conference with international participation "Integration through Research and Innovation", Moldova State University, Chisinau, 2014, pp.121-123.
2.1.4. Applied Statistics
The responsible partners: IST + TUM
The teacher from IST: Artur Ribeiro is Associate Professor at IST Lisbon, Portugal. He graduated at
Instituto Superior Técnico (IST) in 1974. Joined the Department of Electrical and Computer
Engineering (DEEC) in 1977. Received the PhD degree from IST in 1990. He is an Associate Professor
at IST/DEEC since 2000. He was coordinator of the DEEC Scientific Area of Applied Electromagnetism
in 1994-96 and Electronis in 2005-08 and Vice President for the Scientific Issues of the DEEC in 2011.
He is also researcher at the Instituto de Telecomunicações since 1991. From 1993 until 2006 he
coordinated the group of Optoelectronic Devices and since 2006 he works as a researcher in the
Instrumentation and Measurements group. He participated in several national and European
projects. He is the author of 83 papers in International Conferences and Scientific Journals.
His Curriculum Vitae can be found on: http://www.it.pt/person_detail_p.asp?ID=483
Selected publications in the last 6 years:
Tiago J. Rocha, Helena G. Ramos, A. Lopes Ribeiro, Dário J. Pasadas, “Magnetic Sensors Assessment in
Velocity Induced Eddy Current Testing”, Sensors & Actuators: A. Physical, Elsevier, Vol. 228(2015), pp.
55–61. DOI: 10.1016/j.sna.2015.02.004
Tiago J. Rocha, Helena G. Ramos, A. Lopes Ribeiro, Dário J. Pasadas, “Studies to Optimize the Probe
Response for Velocity Induced Eddy Current Testing in Aluminium”, Measurement, Elsevier, vol. 67
(2015), pp. 108-115. DOI: 10.1016/j.measurement.2015.02.003
Helena Geirinhas Ramos, Tiago Rocha, Dário Pasadas, and A. Lopes Ribeiro, “Defect detection in
stainless steel tubes with AMR and GMR sensors using remote field eddy current inspection”, Acta
IMEKO, 2015.
Helena Geirinhas Ramos, Tiago Rocha, Jakub Král, Dário Pasadas and A. Lopes Ribeiro, “An SVM
Approach with Electromagnetic Methods to Assess Metal Plate Thickness”, Measurement, vol. 54
(2014), pp. 201-206. Doi: 10.1016/j.measurement.2014.01.035
12
Ramos, H. G.; Ribeiro, A. L., "Present and Future Impact of Magnetic Sensors in NDE", Procedia
Engineering, Vol. 86, No. 1, pp. 406 - 419, November, 2014. doi:10.1016/j.proeng.2014.11.054
Ribeiro, A. L.; Pasadas, D.; Ramos, H. G.; Rocha, T., "Using Excitation Invariance in the
Characterization of Defects by Eddy Current Image Constructions", Procedia Engineering, Vol. 86, No.
2014, pp. 440 - 451, November, 2014. doi:10.1016/j.proeng.2014.11.057
A. Lopes Ribeiro, Tiago Rocha, Dário Pasadas and Helena Geirinhas Ramos, “Remote Field Eddy
Current Tube Inspection Using Giant-Magnetoresistance Sensors”, Int. J. Industrial Electronics and
Drives, Vol. 1(2014), No. 3, pp.167-173. DOI: 10.1504/IJIED.2014.064093
Helena G. Ramos, Tiago J. Rocha, Dário J. Pasadas, A. Lopes Ribeiro,"Defect Detection With Velocity
Induced Eddy Currents Using a Permanent Magnet”; Electromagnetic Nondestructive Evaluation
(XVII), IOS Press, vol.39, pp.263-270, 2014. Doi: 10.3233/978-1-61499-407-7-263
A. Lopes Ribeiro, Dário J. Pasadas, Helena G. Ramos, Tiago J. Rocha, “Using Tikhonov Regularization
to Determine the Eddy Current Density in a Plate”; Electromagnetic Nondestructive Evaluation (XVII),
IOS Press, Vol.39, pp. 347 - 355, 2014.Doi: 10.3233/978-1-61499-407-7-347
Octavian Postolache, Artur Lopes Ribeiro, H. Geirinhas Ramos, “GMR array uniform eddy current
probe for defect detection in conductive specimens”, Measurement, vol. 46 (10), pp. 4369-4378,
2013. http://dx.doi.org/10.1016/j.measurement.2013.06.050
Kral, J.; Smid, R.; Ramos, H.M.G.; Ribeiro, A.L., “The Lift-Off Effect in Eddy Currents on Thickness
Modeling and Measurement”, IEEE Transactions on Instrumentation and Measurement, Vol. 62, NO.
7, pp. 2043-2047, 2013. DOI : 10.1109/TIM.2013.2247713
H. G. Ramos, T. Rocha, D. Pasadas, A. L. Ribeiro, “Faraday Induction Effect Applied to the Detection of
Defects in a Moving Plate”, 39th Annual Review of Progress in Quantitative Nondestructive
Evaluation, AIP Conf. Proc. 1511, pp. 1490-1497, 2012. DOI: 10.1063/1.4789218
A. Lopes Ribeiro, H. Geirinhas Ramos, D. J. Pasadas, T. J. Rocha, “Eddy Current Mapping Inside a Plane
Conductor with Flaws”, 39th Annual Review of Progress in Quantitative Nondestructive Evaluation,
AIP Conf. Proc. 1511, pp. 428-435, 2012. DOI: 10.1063/1.14789079
A. Lopes Ribeiro, H. Geirinhas Ramos, J. Couto Arez, “Liftoff Insensitive Thickness Measurement of
Aluminum Plates Using Harmonic Eddy Current Excitation and a GMR Sensor”, Measurement, vol. 45,
Iss. 9 (2012), pp. 2246-2253. http://dx.doi.org/10.1016/j.measurement.2012.04.025
Dário Pasadas, T. Jorge Rocha, Helena Geirinhas Ramos, A. Lopes Ribeiro, “Evaluation of Portable ECT
Instruments with Positioning Capability”, Measurement, Elsevier, vol. 45, Iss. 3 (2012), pp. 393 404.
http://dx.doi.org/10.1016/j.measurement.2011.11.005.
A. Lopes Ribeiro, O. Postolache, H. M. Geirinhas Ramos, “A Simple Forward Direct Problem Solver for
Eddy Current Non-destructive Inspection of Aluminium Plates Using Uniform Field Probes”,
Measurement, Elsevier, vol. 45, Iss. 2 (2012), pp. 213 217. doi:10.1016/j.measurement.2011.03.029.
Participation in scientific projects in last 6 years:
EvalTubes, Remaining Life Evaluation of Catalytic Furnace Tubes.
13
CLASSE, Detection, Classification and Estimation of Defects in Metallic Plates Subject to Manual
Inspection
CRACK, Flaw Imaging in Metals by Contactless Conductivity.
DICSAP/WCA, Design, Implementation and Characterization of Stand-Alone Prototypes for Water
Conductivity Assessment.
KeMANDE, Kernel Method Applied to Non Destructive Evaluation.
OMeGA, Optical Measurement of Guided Acoustic Waves in Solid Media.
The teacher from TUM: Ilie NUCA (Assoc. Prof., PhD.) is Associate Professor at Technical University of
Moldova; since 2006 until now he has been the Head of the Chair of Electromechanics and
Metrology. His teaching activities at the home university are focused on the following areas: Electric
drives, Mathematical modeling of processes, Automation and Statistical processing of data. His main
research areas are: Increasing energy efficiency of installations and producers, Development of
modern control systems, Automation of industrial technological processes and Elaboration of special
electric machines and drives. He is a visiting professor at Université d’Artois, France, Technical
University of Iasi, Romania and Technical University of Cluj-Napoca, Romania. In 2014 he got the
AGEPI award for the most original technical creation.
Publications: Over 100 total publications, including 1 manual.
Selected publications from last 6 years:
Il. Nuca, V.Eşanu, A.Motroi, Iurie Nuca. Microprocessor control system of the SDMC-103 electronic
equipment for DC trolleybus traction. Bucureşti: Buletinul AGIR nr4/2012, pp.165-170.
Il. Nuca, Iurie Rîmbu, Vitalie Mihalachi, Andrei Râncău, Al.Motroi, Vitalie Eşanu, Sergiu Ivanov,Jean
Brudny and Remus Pusca. Vector Control Systems Development for Traction Asynchronous Motors.
Buletinul Institutului Politehnic din Iaşi. Tome LVI (LX), Fasc. 4, 2010, pp.93-102.
Il. Nuca, Iu. Rîmbu, V. Eşanu, V. Mihalachi, A. Rîncău, S. Ivanov. Implementation of the vector control
system for traction asynchronous motors. Annals of the University of Craiova. Electrical Engineering
series. No.35, 2011, pp. 172-175. ISSN 1842-4805.
Il.Nuca, P.Todos, V.Eşanu. Urban electric vehicles traction: achievements and trends. Proceedings of
The 7th Conference on Electrical and Power Engineering EPE-2012, October 24-26, 2012, Iasi,
Romania.
V.Cazac, Il. Nuca, P.Todos, Iu.Nuca. Control systems of the wiredrawing machine with annealing
module. Proceedings of the 8 International Conference on Electromechanical and Power Systems,
Craiova-Chişinău-Iaşi, 13-15 october, 2011, pp.81-88.
Ilie Nuca, V.Cazac. Performance of Injection Molding Machine with Induction Heating System. Acta
Electrotehnca. Vol.54, No.5, 2013, pp.336-339, Speciasl Issue. Proceedings of the 5th International
Conference on Modern Power Systems MPS-2013, 28-31 May 2013, Cluj-Napoca, Romania. ISNN
1841-3323.
P.Todos, N.Secrieru, Ilie Nuca, S.Guvir, C.Ghencea. Universities digital network in applied science
themes and economics in Moldova. CD Proceedings of the 9-th Intrernational Conference on
14
Electromechanical and Power Systems SIELMEN-2013, pp.22-25. ISBN 978-606-13-1560-4. 16
October 2013 Iasi, Romania, 17-18.
C. Macovei, Ilie Nuca, E.Lazarev, D.Josanu. Reengineering of electric drive system of the paper cutting
machine. CD Proceedings of the 9-th Intrernational Conference on Electromechanical and Power
Systems SIELMEN-2013, pp.367-370. ISBN 978-606-13-1560-4. 16 October 2013 Iasi, Romania, 17-18
October 2013 Chişinău, Rep. of Moldova.
Coordinator of scientific projects in last 6 years:
MRDA Project „ Analysis of transient regimes of trolleybus control system”
Institutional project ”Innovative drive systems with reluctance motors”
AUF Project „Systeme intelligent de gestion à l’énergie électrique produite dans les centrales
éoliennes”
International R & D project ”Electric traction systems for urban passenger vehicles”
2.1.5. Applied Psychology, Communication Techniques, and Human Resources
Management
The responsible partners: UNISANNIO + USARB
The teacher from the USARB: Valentina PRITCAN, (PhD, asoc. prof.,) is full asociate professor at Alecu Russo Balti State University, Moldova, Department of Psychology. His teaching activities at home university are focused on general psychology, psychology of creativity, communication psychology, social services management, prevention of professional burnout. His main research areas are: psychology of the education, university curriculum, social protection. She has organizational skills and competencies of execution of the training sessions and workshops in international projects. She participated in various International Workshops in UK, Sweden, Germany, USA, Hungary and Romania on the issue of the Bologna process, quality management, adult education, university curriculum design etc. She is acquainted with the main European documents related to the Bologna Process, Tuning project, the European Qualifications Framework and has competences in the use of IT tools, reports elaboration and material dissemination. She has participated as an expert in multiple programs focused on social protection and education.
Selected publications from last 6 years:
Pritcan V. The assessment on the current situation in moldovan academic autonomy. pag. 150-199. In:University Institutional Autonomy in Moldova /ed.: Romeo V. Țurcan, Larisa Bugaian. Chișinău: Cuvîntul-ABC, 2014 (F.E.-P. “Tipografia Centrală”). -204 p.; ISBN 978-9975-4496-9-4. 378.4(478).
Pritcan V. Specific Needs of Children and Elderly Left Behind as a Consequence of Migration, The qualitative research, (co-authors: D. Cheianu-Andrei, R. Gramma, S. Milicenco, V. Rusnac) ; Chişinău, 2011, 248 p.;
Pritcan V. The impact of the complexes on the associations’ course: C. G.Jung’s optics derived from the associative verbal Test. Communication within the scientific colloquium ,,Tradition and modernity regarding the approach to the language "- Scientific Colloquium National Memorial with an international participation devoted to the 70th anniversary of the birth of MIRCHEA IONITSA, professor, distinguished researcher in Balti, language school creator, skilful teacher, Francophone translator. The second edition, Balti, November 26 2011, “Alecu Russo” Balti State University.
Pritcan V. “Life skills”. Textbook for 10-12th grades. Kishinev. Prut International publishing house. 2005 - 96 p. (Coauthors – T.Turkina, S. Tomsha, V. Boldishor.)
15
Pritcan V. Course Support “Occupational Therapy and Psychosocial Rehabilitation” . Kishinev, 2008, 178 p. (Coauthors - L.Boderscova, J. Kihai).
Member of Project Group and researcher in the following projects in last 6 years:
Member of the team of the research project 11.817.05.26F ,,Research associative structures of the Romanian language and development of associative dictionary”;
Local/institutional coordinator of TEMPUS projects: 543853-TEMPUS-1-2013-1-DE-TEMPUS-SMHES Fostering the Knowledge Triangle in Belarus, Ukraine and Moldova, coordinator - University of Paderborn Germany; 530417-TEMPUS-1-2012-1-DETEMPUS-SMHES Eastern Partnership in Pedagogical Innovations in Inclusive Education, coordinator - Karlsruhe Institute of Technology; 530537-DE-SMGR Development of Quality Assurance in Higher Education in Moldova, coordinator - University of Leipzig; Implementarea proiectului european din carul programului TEMPUS 544521-2013-DE-SMHES Entrepreneur Alumni Network (EANET) (coordinator Hogeschool van Amsterdam, Netherlands);
Local/institutional coordinator of the european project „Joint Business Support Centre – Instrument for fostering development of entrepreneurship in Ro-Ua-Md cross-border area (Jo.B.S. Center) MIS-ETC CODE: 1934, Project Leader - Chamber of Commerce and Industry Suceava, Romania (2012-2015)
Membership in editorial boards:
Psychology Magazine, accredited by the Academy of Sciences of Moldova
The teacher from the UNISANNIO: Francesco Vespasiano is full profesor of Sociology at University of Sannio (Benevento). He previous position and activities covers: from 2006 to today Associate Professor of Sociology, University of Sannio (Benevento), from 2001 to 2006 Researcher of Socioloy, University of Sannio (Benevento), from 1997 to 2001 Professor incaricato of Economic Sociology, University of Sannio (Benevento), from 1995 to 2001 Professor adjunct of Sociology of Education, Univesity of “S. Orsola Benincasa”, Naples.
From 2013 to today he is President of Courses of Studies "Economia dei Servizi" and "Economia e Governance", Department of Law, Economics, Management and Quantitative Methods”, University of Sannio (Benevento). He has tought Sociology, Sociology of Innovation and Knowledge, Economic Sociology, Sociology of Tourism, Sociology of Communication.
Selected publications from last 6 years:
Vespasiano F. (2015), Istituzioni sociali complesse, Milano, FrancoAngeli editor; ISBN: 978-88-917-2629-2
Vespasiano F., Martini E. (2015), “The Spaces of Resilience: Learning and Adaptation”, Italian Sociological Review, vol. 5, p. 21-38, ISSN: 2239-8589
Vespasiano F., Martini E. (2015), “Territorial Dynamics: the Rules of Innovation Helices”, In: (eds.): Vrontis D., Sakka G., Amirkhanpour M., Management Innovation, Entrepreneurship and Human Resource Management practices: a global perspective, p. 75-91, Newcastle Upon Tyne: Cambridge Scholars Publishing, ISBN: 978-1-4438-7464-9
Vespasiano F., Simeoni M. (2013), Big Society. Contenuti e critiche, Roma, Armando Editore, ISBN: 978-88-6677-207-1
16
Martini E., Vespasiano F. (2012), “Territorial Intelligence: A Driver of Socialization and Development”, In: (eds.): Papanikos G; Katsas G, Atiner's Conference Paper Series SOC2012-0066. p. 1-15, ATHENS:ATINER, Athens - Greece, 7-10 May 2012
Vespasiano F. (2011), “Le Hybrid Universities per le intelligenze territoriali”, In: (a cura di): BIANCHI A., Le Università del Mezzogiorno nella storia dell’Italia unita 1861-2011, p. 143-152, Bologna, Il Mulino, ISBN: 978-88-15-23355-4
Martini E., Vespasiano F. (2011), “The Paradigm of the Social Construction of Knowledge: The Triple Helix Model”, In: (eds.): Gregory T. Papanikos, Essays on Social Themes, p. 173-185, Athens:ATINER (Athens Institute for Education and Research), ISBN: 978-960-9549-80-6
Vespasiano F., Martini E. (2011), “The Triple Helix Dynamics for the Reduction of the Social Complexity”, In: (eds.): Affuso S; D'Alessandro S; Marini G, The Next Global Scenarios. The Systemic Approach and the 21st Century Challenges, p. 171-191, Roma, Aracne, ISBN: 978-88-548-4270-0
2.1.6. Strategic Management
The responsible partners: AGEPI + USM
The teacher from AGEPI: Iurie BADAR is head of Economic Division of the State Agency on
Intellectuala Property of the Republic of Moldova since 2001. He is Doctor in economy with a vast
expertise in economic issues. Mr. Badar is author and co-author of about 50 science publications on
economic reforms, privatization and economic development, including IP and innovation. He has
been actively involved in the development of the National Intellectual Property Strategy and drafting
of innovation strategy. Mr. Badar is lecturer of economy and invited speaker at different IP trainings
events.
Selected publications from last 6 years:
BADAR Iu, Supraprofiturile monopoliste şi activitatea inovaţională, Conferinţa ştiinţifică
internaţională Competitivitatea şi inovarea în economia cunoaşterii(24-25 septembrie 2010) vol. I,
Chişinău, 2011, p 161-164. (Monopolistic Over Profits and Innovative Activity, The International
Scientific Conference, Competitiveness and Innovation in the Knowledge Economy (September 24th-
25th 2010), Volume I, Chisinau, 2911, p. 161-164.)
BADAR Iu. Dimensiuni economice ale dreptului de autor şi drepturilor conexe, Intelectus , nr. 2,
2011, P. 8-14. (Economic Dimensions of Copyright and Related Rights, Intellectus, No.2, 2011, p. 8-
14.)
БАДЫР Ю., Стрелков О., Чеpнуха А. Рекомендации по усилению инновационной деятености
МСП в странах СНГ. Версия 1., Женева, 2010. (coautor)(Recommendations on Strengthening the
Innovation Activity of SMEs in CIS countries. Version 1, Geneva, 2010. (co-author))
BADÂR Iu. Conceptele proprietăţii intelectuale şi controversele lor, Lecturi AGEPI, Chişinău, 2010, p.
293-300. (Intellectual Property Concepts and Controversies Thereof, AGEPI Readings, Chisinau, 2010,
p.293-300.)
17
БАДЫР Ю. Факторы препятствующие вовлечению объектов интеллектуальной соственности в
экономический оборот в странных с переходной экономикой//Iнтелектуальна власнiсть, 2011,
№ 3, с. 51-58. (Factors Preventing Inclusion of Intellectual Property Objects in Economic Turnover in
Countries with Economies in Transition//Intellectual Property, 2011, No.3, chapters 51-58)
БАДЫР Ю. Проблемы и перспективы коммерциализации результатов интеллектуальной
деятельности, Тезисы докладов участников Второго международного форума по
интеллектуальной собственности ЕХРОРRIORITY 2011, Москва, ЦВК «Экспоцентр», 2011, р 15-17.
(Problems and Prospects of Commercialization of Intellectual Activity Results, Abstracts of Reports by
Participants of the Second International Forum on Intellectual Property EXPOPRIORITY 2011,
Moscow, «Expocentre», 2011, p. 15-17.)
BADAR Iu., Dimensiunea Economică a proprietății Intelectuale, Chisinau, AGEPI, 2014, 320 p.
(Economic Dimension of Intellectual Property, Chisinau, AGEPI, 2014, 320 p.)
The teacher from the USM: Marian Jalencu (Assoc. Prof., PhD.) is associate professor at Moldova
State University (USM), Republic of Moldova. He is holder of some university
courses: "Management" and " Innovational Management " - for the first cycle - Bachelor
students, "Strategic Management" - for the second cycle - Master students.
Responsible for the organization, implementation and coordination of activities and scientific
research, including students (bachelor and master), the innovation and strategic management field.
Also, he is Head of Business Administration Departmnet, Faculty of Economic Sciences, with
responsibility for coordination of activities within the Department of Business
Administration in its development, responsible for elaborating and further development
of study plans and programs at Bachelor and Master degree in business administration, quality
assurance of curricula in the subjects held at Department; scientific development of teachers and
students, providing partnerships with the business environment, etc.
Selected publications from last 6 years:
Jalencu, M., Rugina-Matran, V., Balmus-Andone, M.: Innovational management and technological transfer, Chisinau, CEP USM, 2015, 211 pp.
Coauthor, "Entrepreneurship: starting business", coord. Bugaian L., Chisinau, Elena-VI, 2010, 340 pp.
Jalencu, M.: Utilizarea platformei Moodle în învățământul superior economic din Republica Moldova: realizări și perspective, „Crunt 2014: Bunele practici de instruire E-Learning / Online”, Culegere de articole, 24 – 27 septembrie 2014, UTM, Chişinău, 2014. – p. 158 – 162.
Jalencu, M.: Rolul stakeholderilor în asigurarea calității activității organizației (pe exemplul instituțiilor de învățământ superior (IÎS)), Conferinţa Ştiinţifică Internaţională „Politici și mecanisme de inovare și dezvoltare a proceselor economico-financiare și sociale în plan național și internațional”, 31 Octombrie – 01 Noiembrie 2014. - Chişinău: CEP USM, 2014. – p. 456 – 461.
Jalencu, M.: Dezvoltarea sistemului antreprenorial universitar în vederea asigurării calității învățământului superior economic, „Modalități de eficientizare a sistemului economico-financiar în scopul dezvoltării economice durabile a Republicii Moldova”, Conferinţa Ştiinţifică Internaţională Jubiliară, ediția a VIII-a, 01 – 02 Noiembrie 2013. - Chişinău: CEP USM, 2013. – p. 11 – 16.
18
Morariu, A., Dumitrascu, V., Jalencu, M., Bălăneasa, C.: Morariu, A.: Public policies for flexibility concerning the European market of human resources, The Annals of the “Ştefan cel Mare” University Suceava, Fascicle of the Faculty of Economics and Public Administration, no. 1(9), 2009, p.330
Member of Project Group and researcher in the following projects in last 6 years:
Project Tempus - "Developing partnerships between universities and enteprises in Moldova";
Project Tempus - Tempus IV Programme - "Leading and Managing Change in Higher Education (LaManche)";
Project Tempus CRUNT -Tempus 516-197-2011
Membership in editorial boards:
The Annals of the “Stefan cel Mare” University Suceava, Fascicle of the Faculty of Economics and Public Administration ", Suceava, Romania, ISSN: 2066-575X;
- "Studia Universitatis Moldaviae", Exact and Economic Sciences, Chisinau, Moldova State University, ISSN 1857-1735, http://studiamsu.eu/
2.1.7. European Project Design and Management
The responsible partners: TUIASI + SAUM
The teacher from TUIASI: Cristian-Győző Haba (prof.eng. PhD) is full professor at Technical University of Iasi, Romania, Department of Electrical Engineering. His activities at home university cover Real-Time Programming, Information Technology in the Design of Product and Services, Hardware Description Languages and PLCs.
His research interests are focused on Design of digital systems, Microcontroller based systems, Web based measurement systems, E-learning, Distance learning, Digital command of electrical machines.
He is continuously promoting cooperation with industry and research centers, collaboration with local and regional authorities and sustains the increase of technology transfer and innovations.
Selected publications from last 6 years:
C.G.Haba, L.Breniuc, Visualization and Analysis of Student Activity on Moodle Content Management System, Conference on Education and New Learning Technologies, Barcelona, Spain, 7-9 July 2014, pp.2800-2806.
C.G.Haba, D. Pappas, CSLC: The Infrastructure Compiler for SoC Design, 12th International Conference on Development and Application Systems, DAS 2014, Suceava, Romania, May 15-17, 2014, pp. 149-154.
C.G.Haba, Using FPGA Development Boards for Multi-course Laboratory Support, 2014 IEEE Global Engineering Education Conference (EDUCON), 3-5 April 2014, Istanbul, Turkey, pp. 794-797.
V. Švač, T, Igllicar, B, Mihalič, C.G. Haba, N. Madzharov, R. Ilarionov, I. Vijatov, M. Regner, Z. Kabács, Analysis of Electromobile Infrastructure in South-East Europe Countries, 2011.
Stefan Milchev –Roumiana Lafchieva – Nikolay Madzharov –Márta Regner - Anita Antal - Károly Illés - Erna Vágusz – Carmen Hutu - Cristiana Istrate - Cristian-Gyozo Haba - Mario Turner –Milos Cambal –
19
Dagmar Caganova –Zdenka Gyurak Babelova –Jana Sujanova – Lubica Cerna –Lubomir Jahnatek –Slavka Janosikova – Bogdan Ivanovič, - Tatjana Pajnkihar - Tomaž Savšek, Social dialogue in automotive sector in South East Europe, 2011.
C.G.Haba, R.Cociu, L.Cociu, D.Lucache, "Project Autoclusters Results and Lesson Learned", International Conference on Electromechanical and Power Systems, Chișinău, 16-18 October 2013, pp. 552-555, ISBN 978-606-13-1560-4.
C.G.Haba, Initial Development of Wireless Applications Using FPGAs, 2012 International Conference on Electrical and Power Engineering (EPE 2012), Iasi, 25-27 October 2012, pp. 741-746.
Number of citations according to Web of science: 21
Principal investigator of scientific projects in last 6 years:
Autoclusters - The international cooperative network of educational and research institution with subcontractors and other bodies active in Automotive Industry, SEE EoI/A/594/1.2/X, Transnational South East Europe Program
SEEE-MOBILITY - Electromobile infrastructure analysis in South East Europe
PSICOME – The use of FPGAs and CPLDs in the design of electrical machine control CNCSIS Grant, CNCSIS code 233
Evaluator:
National evaluator for CNCSIS (Romanian Research Agency) and MCT (Ministry of Research and Technology) for Electrical Engineering and IT, 2006-2009.
International evaluator for Slovak Research and Development Agency for Electrical Engineering and IT (2007)
Short term expert for Operational Sectorial Program (POS-DRU) projects (3 projects).
Membership in editorial boards:
Since 2008, Editor in Chief of TUIASI scientific journal "Bulletin of the Polytechnic Institute of Iasi", section Electrical Engineering, Power Engineering and Electronics
Conference Organizer:
International Conference on Electrical and Power Engineering EPE2008, EPE 2010, EPE 2012, EPE 2014, International Conference on Electromechanical and Power Systems SIELMEN 2009, 2013, National Conference on Virtual Learning CNIV 2009
Qualifications
May 2011 – FP7 Training for project staff & experts responsible for FP7 proposals preparation, Vienna, Austria.
October 2011 – FP7 Training for project experts responsible for FP7 proposals preparation, Budapest, Hungary.
Member of International Committee of Conferences
20
International Conference on Knowledge Generation, Communication and Management”, KGCM 2007-2014, International Symposium on Collaborative Enterprises CENT 2011, Interdisciplinary Research, Education, and Communication IDREC 2012, Distance Learning Workshop DLW 2005, Virtual University 2005-2011
Membership
IEEE (Computer Science, Education, Internet of Things and Transport Electrification),
ACM,
European Alliance of Innovation (SIB Transportation, SIB Education and SIB Future Internet Technologies),
AGIR (Romanian General Association of Engineers)
The teacher from SAUM: Andrei ZBANCA (PhD in economics) is associate professor at Agrarian
University of Moldova, the Republic of Moldova. His teaching activities at university are focused on
development and management of project, business plan development, feasibility studies and
implementation of investments, planning / organizing of agricultural activities and production. He
has experience in theoretical and applied research, development of economy and special agricultural
industry and other research and development institution. His main research areas are: project
management, budgeting of activities and management of investments, planning and organizing of
activities.
Selected publications from last 6 years
Stratan,N., Zbanca,A., Litvin,A., Morei.,V., Guide on economical argumentation of the agricultural activities in the Republic of Moldova (vegetal sector), Academy of Science of Moldova, year 2009, 215 pages, ISSN 1857-0003
Zbanca,A., Morei,V., Stratan,A., The comparative economic analysis of production activities in the agricultural sector of the Republic of Moldova. In: Scientific papers series “Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 9(3)/2009, 199-2003 pag., ISSN 1844-5640.
Zbanca,A., Morei,V., Stratan,A., State and Development Opportunities of High Value Agriculture in the Republic Of Moldova, International Symposium, ASE Bucuresti, 25-26 September 2009, 172-178 pag., ISBN 978-606-505-257-4.
Zbanca,A., Morei,V., Stratan,A., Milking cows breeding – a prioritized activity for the revitalization of the animal husbandry sector in the Republic of Moldova. În: Scientific papers series “Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 10(3)/2010, 237-242 pag., ISSN 1844-5640.
Zbanca,A., Morei,V., Stratan,A., Breeding swine for meat – main direction of re-launching of the livestock sector in the Republic of Moldova. În: Scientific papers series “Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 10(3)/2010, 353-358 pag., ISSN 1844-5640.
Zbanca,A., Morei,V., Stratan,A., Reviving the livestock sector in the Republic of Moldavia through the dairy sector development. In: International Symposium - ICEADR (Romania), IEAB (Serbia), USAMVB
21
(Romania), ASAS „Gheorghe Ionescu Sisesti”, Bucuresti, 23-24 September 2010, 47-54 pag., ISBN 978-606-8017-61-7.
Zbanca,A., Negritu G., FEASIBILITY OF INVESTMENTS IN CULTIVATION OF TOMATOES IN PROTECTED
AREAS. În: Scientific papers series “Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13/3, 2013, 465-467 pag., ISSN 2285-3952
Zbanca,A., Negritu G., FEASIBILITY OF INVESTMENTS FOR PLANTING AND MAINTENANCE OF APPLE ORCHARDS BY APPLYING VARIOUS TECHNOLOGIES. In: Scientific papers series “Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13/1, 2013, 465-467 pag., ISSN 2285-3952
ZBANCĂ A., NEGRITU G., BADIU D., FEASIBILITY OF INVESTMENT IN CHERRY ORCHARD, In: Scientific Papers Series Management, Economic Engineering in Agriculture and Rural Development, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 15/1, 2015, ISSN 2284-7995
2.1.8. Innovation and Technological Transfer
The responsible partners: AITT + USM
The teacher from the USM: Marian JALENCU (Assoc. Prof., PhD.) is full associate professor at
Moldova State University (USM), Republic of Moldova. He is holder of some university
courses: "Management" and " Innovational Management " - for the first cycle - Bachelor
students, "Strategic Management" - for the second cycle - Master students.
Responsible for the organization, implementation and coordination of activities and scientific
research, including students (bachelor and master), the innovation and strategic management field.
Also, he is Head of Business Administration Departmnet, Faculty of Economic Sciences, with
responsibility for coordination of activities within the Department of Business
Administration in its development, responsible for elaborating and further development
of study plans and programs at Bachelor and Master degree in business administration, quality
assurance of curricula in the subjects held at Department; scientific development of teachers and
students, providing partnerships with the business environment, etc.
Selected publications from last 6 years:
Jalencu, M., Rugina-Matran, V., Balmus-Andone, M.: Innovational management and technological
transfer, Chisinau, CEP USM, 2015, 211 pp.
Coauthor, "Entrepreneurship: starting business", coord. Bugaian L., Chisinau, Elena-VI, 2010, 340 pp.
Jalencu, M.: Utilizarea platformei Moodle în învățământul superior economic din Republica Moldova:
realizări și perspective, „Crunt 2014: Bunele practici de instruire E-Learning / Online”, Culegere de
articole, 24 – 27 septembrie 2014, UTM, Chişinău, 2014. – p. 158 – 162.
Jalencu, M.: Rolul stakeholderilor în asigurarea calității activității organizației (pe exemplul
instituțiilor de învățământ superior (IÎS)), Conferinţa Ştiinţifică Internaţională „Politici și mecanisme
22
de inovare și dezvoltare a proceselor economico-financiare și sociale în plan național și
internațional”, 31 Octombrie – 01 Noiembrie 2014. - Chişinău: CEP USM, 2014. – p. 456 – 461.
Jalencu, M.: Dezvoltarea sistemului antreprenorial universitar în vederea asigurării calității
învățământului superior economic, „Modalități de eficientizare a sistemului economico-financiar în
scopul dezvoltării economice durabile a Republicii Moldova”, Conferinţa Ştiinţifică Internaţională
Jubiliară, ediția a VIII-a, 01 – 02 Noiembrie 2013. - Chişinău: CEP USM, 2013. – p. 11 – 16.
Morariu, A., Dumitrascu, V., Jalencu, M., Bălăneasa, C.: Morariu, A.: Public policies for flexibility
concerning the European market of human resources, The Annals of the “Ştefan cel Mare” University
Suceava, Fascicle of the Faculty of Economics and Public Administration, no. 1(9), 2009, p.330
Member of Project Group and researcher in the following projects in last 6 years:
Project Tempus - "Developing partnerships between universities and enteprises in Moldova";
Project Tempus - Tempus IV Programme - "Leading and Managing Change in Higher Education
(LaManche)";
Project Tempus CRUNT -Tempus 516-197-2011.
Membership in editorial boards:
- "The Annals of the “Stefan cel Mare” University Suceava, Fascicle of the Faculty of Economics and
Public Administration ", Suceava, Romania, ISSN: 2066-575X;
- "Studia Universitatis Moldaviae", Exact and Economic Sciences, Chisinau, Moldova State University,
ISSN 1857-1735, http://studiamsu.eu/
The teacher from AIT: Natalia SUDITU – for more than 3 years she is the Head of Infrastructure
Development Department at the Agency for Innovation and Technology Transfer of the Academy of
Science of Moldova. Her main responsibilities at the agency are: development of strategies and
national legislation in the innovation field, management of innovation infrastructure (science and
technology parks, innovation incubators, science and technology clusters), etc. Natalia Suditu has
also experience as a senior lecturer, she taught courses in strategic management, entrepreneurship
management and marketing at the Slavonic University of Moldova for 3 years. In addition, she has 1
year of experience as a manager of Innovation Incubator.
Within the module "Innovation and Technology Transfer”, she delivered the following topics:
Innovation - the main factor of Competitiveness in the Knowledge Economy; Innovation
Infrastructure: national and international best practices; Clusters: innovation network for business
growth; State regulation and support of the innovative activities.
The teacher from AIT: Vadim IATCHEVICI – (PhD in Technology Transfer) He is the Head of the
Technology Transfer Department at the Agency for Innovation and Technology Transfer of the
Academy of Science. His main responsibilities are: selection and monitoring of technology transfer
projects which are submitted by research institutes and companies throughout the Republic of
Moldova.
23
Within the module "Innovation and Technology Transfer" he taught the following topics: The
development of technology transfer under the innovation Entities; Tools to support innovation and
technology transfer activities; Planning the innovation and technology transfer projects.
Publications in the field of innovation:
Iatchevici V. 2014. Exploitation of intellectual property through the creation of new companies and commercialization of intellectual property rights. (in Romanian). Intellectus 1/2014: 56 – 58, ISSN 1810-7079.
Iatchevici V. Impact of Innovations in the Republic of Moldova (in Romanian). Intellectus 2/2014: 49 – 51, ISSN 1810-7079.
Iatchevici V. 2014. “Mechanisms for stimulating innovation and technology transfer in Republic of Moldova” (in English). Scientific - technical journal "Bulletin of the National Transport University of Ukraine" (ISSN 2308-6645).
Iatchevici V., Smid S., Moraru V., Varzari V. 2015. Technology Transfer Handbook (in English). ISBN 978-9975-4089-7-4
2.1.9. Modern Technologies and Engineering Innovation
The responsible partners: TUKE + USARB
The teacher from TUKE: Linus MICHAELI (prof. Ing. DrSc.) is full profesor at Technical university of
Kosice, Slovakia. His teaching activities at home university are focused on electronics,
microelectronics, biomedical systems a related areas. He has rich experience in basic and applied
research and developement with technology and innovation transfer to industry and other reaserach
and developement institution sucha s Slovak academy of science, etc. His main research areas are:
metrology of analog to digital and digital to analog interfaces a possibilities for the digital correction
of their errors using error models. data acquisition systems. virtual instrumentation and instruments
for the cosmic ray measurement.
Selected publications from last 6 years
Arpaia,P., Michaeli,L. Rapuano,S.: Model-based compensation of SAR nonlinearity , IEEE Transactions on Instrumentation and Measurement. Vol. 58, no. 3 (2009), p. 541-550. – ISSN 0018-9456
Šaliga,J.,Michaeli,L., Sakmár,M.,Buša,J.: Processing of bidirectional exponential stimulus in ADC testing, Measurement. Vol. 43, no. 8 (2010), p. 1061-1068. – ISSN 0263-2241
Šaliga,J.,Michaeli,L.: Instrumentation for the information and communication technology era, Measurement. Vol. 45, no. 2 (2012), p. 145-147. – ISSN 0263-2241
Balogh,L., Kollar, I., Michaeli,L., Šaliga,J.: Lipták, J.: Full information from measured ADC test data using maximum likelihood estimation, Measurement. Vol. 45, no. 2 (2012), p. 164-169. – ISSN 0263-2241
Michaeli,L.,Rapuano,S.: Preface to the special issue on XV IMEKO TC-4 Symposium and XII International Workshop on ADC Modelling and Testing, Computer Standards & Interfaces. Vol. 32, no. 3 (2010), p. 71-72. – ISSN 0920-5489
24
Number of citations according to Web of science: 168
Principal investigator of scientific projects in last 6 years:
New testing methods for Analog-to-Digital Intefaces based on the error model identification, Slovak national scientific grant agency, project number. 1/0555/11, 2011.
Laboratory workplace for electronic course controlled by IT technology (E-Lab), Slovak national cultural and education agency, project number 029 TUKE, 2012.
Membership in editorial boards:
Computer Standard Interfaces- Elsevier Publisher – editorial board (CC journal)
Electrical Engineering Research Report -University of Naples “Federico II” – editorial board
Measurement Science Review – SAV Bratislava, Slovakia, editorial board (MJL journal)
The teacher from the USARB: Pavel TOPALA (univ. prof., dr.hab.) is a full university professor at Alecu
Russo Balti State University, Moldova, Dean of the Faculty of Exact, Environmental and Economic
Sciences. His teaching activities at home university are focused on technology of materials, the
splinting of materials, sculls and machine tools; unconventional technologies and the study of
materials, equipment and unconventional technologies, technique and technologies. He has a rich
experience in basic and applied research and development with technology and innovation transfer
to industry and other research and development institution at the Academy of Sciences of Moldova.
He participated in international exhibitions: ,,Inventics", Jassy (2011, 2012, 2013); "INFOINVENT",
Chisinau (2011, 2013); Researchers’ Night, Chisinau (2013).
Selected publications from last 6 years:
Topala, P.; Stoicev, P.; Ojegov, AL.; Pinzaru, N. Effects of abnormal dissolving of oxygen in metals
under the influence of electrical discharges in impulse plasma. International Journal of Modern
Manufacturing Technologies. Vol. 2, 2010, p. 95-102. ISSN 2067–3604. (0,4).
Topală, Pavel; Laurenţiu, Slătineanu; Stoicev, Petru. Phisical and chemical processes during the
machining by means of the electro-erosive method. Nonconventional Technologies Review –
nr.1/2010, Oradea, Romînia, p.50-54. (0,25)
Topala, P.; Pinzaru, N.; Petru, S. Transformations in the surfaces of tool-electrodes during surfaces
layer formation by applying electric discharges in impulse. ModTech 2010. 20-22 May, 2010. Slănic-
Moldova, România. p. 639-642. (0,2)
Topala, P., Rusnac V., Beşliu V., Ojegov A., Pînzaru N. Physical and chemical effects of EDI processing
// Internet Journal of Engineering and Technology. – 2011. – Vol. 2, nr. 2 , issue 1;
Topala, P., Besliu, V., Stoicev, P., Ojegov, A. Application of electric discharges in impulse in micro and
nanotechnology / // Proceedings of The 16th International Conference Modern Technologies, Quality
and Innovation – New face of TMCR, 24-26 May 2012, Sinaia, Romania. – Sinaia, 2012. – Vol. II. – P.
969-972.
25
Topala, P., Besliu, V., Stoicev, P., Ojegov, A. Structural modifications – properties of surface micro-
strata with graphite depositions. International Journal of Modern Manufacturing Technologies, 2013,
vol II, pp. 97-102. ISSN 2067–3604.
Topala, P., Besliu, V., Coroziunea materialelor metalice după depunerea peliculelor de grafit prin
descărcări electrice în impuls. The 17th international conference „INVENTICA 2013”, p. 612-613.
Member of Project Group and researcher in the following projects in last 6 years:
Technological research on the formation of oxide and hydroxide layers on conductible surfaces
through electric discharges in impulse (2008-2010);
Technological research on the formation of surfaces with superior properties of electronic thermo-
emission through electric discharges in impulse (2011-2014);
The project within the European Seventh Framework Programme (FP7) „Enhancing the capacities of
the ELIRI Research Institute in applied research to enable the integration of Moldova in the European
Research Area on the basis of scientific excellence”.
He intensively collaborates with Ionian and Applied Physics Institute of the University of Innsbruck
(Austria), he is associated to the scientific, technological and training Cluster in electronic
technologies, micro and Nano-electronics and fine mechanics „ELCHIM-MOLDOVA” (D. Ghiţu
Institute of Nanotechnologies, USM, UTM, TOPAZ, IFA, SAUM, AJEPI AITT) and he collaborates with
the Laboratory "Electrical Methods of Materials Processing" of the Institute of Applied Physics of the
Academy of Sciences of Moldova.
Membership in editorial boards:
Member of the editorial board of the journal " Engineering Meridian " besides the Technical
University of Moldova;
Member of the editorial board of the journal "Physics and Technology: processes, models,
experiments";
Member of the editorial board of the magazine Annals of Danube University of Galati, Fascicle
"Technologies in machine building";
Member of the editorial board of the journal: International Journal of Modern Manufacturing
Technologies.
2.1.10. IT Tools and Technology for Innovation
The responsible partners: TUKE + TUM
The teacher from TUKE: Ján ŠALIGA (prof. Ing. PhD.) is full professor at Technical university of Košice,
Slovakia. His teaching activities at home university cover measurement systems, software tools for
measurement systems, industrial communications and data acquisition systems and sensor
technology. He research interests are focused on Analogue-to-digital and digital-to analogue
26
convertors and interfaces, electronic measurement and instrumentation, data acquisition systems,
virtual and smart measurement system and sensor networks for environment applications. He has
rich experiences in cooperation with industry and research establishements, which are linked with
technology transfer and innovations.
Selected publications from last 6 years
Daponte P.- Saliga J.: Advances in measurement of electrical quantities, Measurement. Vol. 43, no. 8 (2010), p. 983-984. – ISSN 0263-2241 (CC journal).
Šaliga J.– Michaeli L. – Sakmár M. – Buša J.: Processing of bidirectional exponential stimulus in ADC testing, Measurement. Vol. 43, no. 8 (2010), p. 1061-1068. – ISSN 0263-2241 (CC journal)
Corrado M. – Rapuano S. – Šaliga J.: An overview of different signal sources for histogram based testing of ADCs, Measurement. Vol. 43, no. 7 (2010), p. 878-886. – ISSN 0263-2241 (CC journal).
BALOGH, L. – KOLLÁR, I. – MICHAELI, L. – ŠALIGA, J. – LIPTÁK, J.: Full information from measured ADC test data using maximum likelihood estimation, Measurement. Vol. 45, no. 2 (2012), p. 164-169. – ISSN 0263-2241 (CC journal)
CORRADO, M. – DE VITO, L. – RAMOS, H. – ŠALIGA, J.: Hardware and software platform for ADCWAN remote laboratory, Measurement. Vol. 45, no. 4 (2012), p. 795-807. – ISSN 0263-2241 (CC journal)
Šaliga J. – Kollár I. – Michaeli L. – Buša J. – Lipták J. – Virosztek T.: A Comparison of Least Squares and Maximum Likelihood Methods Using Sine Fitting in ADC Testing, Measurement, 2013, Vol. 46 No. 10 p. 4362-4368ISSN 0263-2241(CC journal)
Number of citations according to Web of science: 103
Principal investigator of scientific projects in last 6 years:
Electromagnetic compatibility of technology devices in tire industry, APVV-0333-11, 2012 – 2015, Slovak Republic
Centre of information and communication technologies for knowledge systems, ITMS 26220120020, 2009 – 2010, Slovak Republic
Development of Centre of information and communication technologies for knowledge systems, ITMS 26220120030, 2010 – 2013, Slovak Republic
Membership in editorial boards:
Radioengineering – editorial board (MJL journal)
Acta Electrotechnica et Informatica – Technical university of Košice, editor in chief
Measurement (CC journal by Elsevier) – Guest editor in 2011 and 2012
The teacher from TUM: Andrei CHICIUC (Assoc. Prof., PhD) is President of the National Agency for
Quality Assurance in Professional Education and Associate Professor at Technical University of
Moldova. His teaching activities at TUM are focused on the areas of Metrology, Quality management
systems, and Data acquisition systems. At the same time, A. Chiciuc is a pioneer in the introduction
of the course “IT tools in management” (in Moldova) in several Master degree programs (starting
27
with 2004). The main areas of his scientific activity are as follows: Estimation and capitalization of
wind potential, Quality management systems and educational reforms. Over the past six years, he
has benefited from trainings at universities in the EU, among which can be mentioned Roskilde
University (Denmark), Gent University (Belgium), Royal Institute of Technology (Sweden), Agro-
Campus 2 Rennes (France) etc.
Membership
Member of the National Metrology Board
Member of the Moldovan Electrotechnical Committee
Member of the Governing Board of National Agency for Quality Assurance in Professional Education
Member of the Scientific Editorial Board of the journal „Metrologie”
Principal investigator of scientific projects in last 6 years: Project 11.818.06.03 A ”Developing of Moldavian Wind Energy Atlas” – coordinator.
TEMPUS Project „Development of Quality Assurance in Higher Education in Moldova" - Institutional coordinator.
„Enabling Activities for the preparation of the Third National Communication under the United Nations Framework Climate Change Convention” Project, Moldova GFL-2328-4B36-2724-2202 - Consultant, Wind Energy sector
1444544 Tempus 2008-FR-JPHES «Développement de partenariats avec les entreprises en Moldavi». - Institutional coordinator, strengthening relations between Universities and Employers
National R & D project “The wind plant integration into national electrical system”. - Consultant, identifying solutions for integrating Renewable Energy Sources
Tempus Project JEP-24182-2003 „MSc Program in Environment and Clean Technologies” - Expert, Master program development
“Southern Europe Electrical System Technical Support” Project, Activity MOL-2601, “Energy Conservation Policies. Strategy Development” - National expert, energy conservation
„Climate Change” UNDP/GEF Project, Moldova MOL/G31 - National expert, elaboration of the country report
Publications: Over 60 publications, including 4 manuals.
Selected publications from last 6 years:
Autonomia instituţională universitară în Republica Moldova. ed.: Romeo V.Ţurcan, Larisa Bugaian. – Chişinău: Cuvîntul-ABC, 2014 – 216 p. – Andrei Chiciuc, Capitolul 5: Evaluarea situaţiei curente privind autonomia academică. ISBN 978-9975-4496-9-4.
Rachier Vasile, Sobor Ion, Chiciuc Andrei. Assessment of Wind Energy Resource of Moldova. Meridian Ingineresc, nr.2, 2014, p. 23-29. ISSN 1683-853X, categoria C.
Ion Sobor, Vasile Rachier, Andrei Chiciuc, Radion Ciupercă. Small Wind Energy System With Permanent Magnet Eddy Current Heater. Bul. Inst. Polit. din Iaşi. Tomul LIX (LXIII), Fasc. 4, 2013, secţia Electrotehnică. Energetică. Electronică. Categoria B+, ISSN 1223-8139, p. 143-150.
28
Sobor Ion, Chiciuc Andrei, Ciupercă Rodion, Rachier Vasile, Convertion of the wind energy into heat. Proceeding of 9th International Conference and Exhibition on Electromechanical and Power Systems SIELMEN 2013, 15-18 Octomber, Iași-Chisinau - 2013, Editura PIM, pag. 469-474, ISBN 978-606-13-1560-4.
Ţăranu Marius, Comendant Ion, Ţăranu Lilia, Druţă Ala, Treşcilo Lidia, Chiciuc Andrei etc., A Treia Comunicarea Naţională a Republicii Moldova elaborată în cadrul Convenţiei-cadru a Organizaţiei Naţiunilor Unite privind Schimbarea Climei. – Ch.: “Imprint Plus” SRL, 2013 – 415 p., ISBN 978-9975-4385-6-8.
Ion Sobor, Andrei Chiciuc, Ana Azarov, Vasile Rachier. Variaţiile diurne ale vitezei vântului în zona podișului central al Republicii Moldova. Buletinul AGIR nr. 1/2013, An XVIII, p. 139-144. ISSN-L 1224-7928, ICI (Index Copernicus International) value 5,14, Online: ISSN 2247-3548
Ion SOBOR, Andrei CHICIUC, Rodion Ciupercă, Vasile RACHIER. Concerning the Conversion Efficiency Increase of the Available Wind Potential. Annals of the university of Craiova - Electrical Engineering Series, 2011; 35(35): 122-127. ICID: 973414, IC™ Value: 3.00. ISSN: 1842-4805
Ion SOBOR, Andrei CHICIUC, Rodion Ciupercă, Vasile RACHIER. Concerning the Conversion Efficiency Increase of the Available Wind Potential. Proceedings of the 8th International Conference on Electromechanical and Power Systems SIELMEN 2011, 13-15 Octomber, Chisinau - 2011, pp. 457-462.
Ion SOBOR, Andrei CHICIUC, Determination of the wind speed profile over Balanesti hill, Proceedings of the 6-th Inernational Conference on Electrical and Power Engineering. V. II, October 28-30, 2010, p. 285-288. ISBN 978-606-13-0077- 8
2.1.11. Marketing and Business Administration
The responsible partners: UniSannio + SAUM
Teacher from UniSannio: Angelo RIVIEZZO is a PhD, Assistant Professor at the University of Sannio,
Department of Law, Economics, Management and Quantitative Method. He holds a PhD in
Management and his main research interests include competitive strategies, with particular focus on
SMEs, and entrepreneurship, with particular focus on corporate entrepreneurship. He has authored
about 60 publications on these topics, including articles in peer-reviewed journals, books, book
chapters and conference proceedings. He currently teaches Business Strategy and Business Planning
at the University of Sannio. He has been involved in several research projects with international
partners over the last years. He is an active member of the Italian Management Academy (SIMA), the
European Management Academy (EURAM) and the European University Network on
Entrepreneurship (ESU).
Selected publications from last 6 years:
RIVIEZZO A, GAROFANO A, NAPOLITANO MR, MARINO V (2015). “Moving forward or running to
stand still? Exploring the nature and the role of family firms’ strategic orientation”. JOURNAL OF
FAMILY BUSINESS STRATEGY, Vol. 6, n. 3, pp. 190-205, ISSN: 1877-8585
29
RIVIEZZO A, SKIPPARI M, GAROFANO A (2015). Who wants to live forever: exploring 30 years of
research on business longevity. BUSINESS HISTORY, Vol. 57, n. 7, pp. 970-987, ISNN: 0007-6791
DE NISCO A., RIVIEZZO A, NAPOLITANO MR (2015). An Importance-Performance Analysis of tourist
satisfaction at destination level: evidence from Campania (Italy). EUROPEAN JOURNAL OF TOURISM
RESEARCH, Vol. 10, pp. 64-75, ISSN: 1994 – 7658
RIVIEZZO A, NAPOLITANO MR, GAROFANO A (2015). From words to deeds: are Italian universities
changing their discursive practices to promote entrepreneurship? In: FAYOLLE A., KYRO P., LIÑÁN F.
(Editors). Developing, shaping and growing entrepreneurship, p. 126-153, CHELTENHAM:Edgar Elgar
Publishing, ISBN 978-1-78471-357-7.
RIVIEZZO A, (2014). Detecting the Determinant Attributes of Entrepreneurial Orientation within the
Italian University Departments. JOURNAL OF ENTERPRISING CULTURE, Vol. 22, n. 2 (June), p. 133-
159, ISSN: 0218-4958
RIVIEZZO A., DE NISCO A., GAROFANO A (2014). Understanding Wine Purchase and Consumption
Behavior: A Market Segmentation Proposal. INTERNATIONAL JOURNAL OF SALES AND MARKETING
MANAGEMENT, vol. 3, n. 1, p. 11-24, ISSN: 2319-4898.
RIVIEZZO A, NAPOLITANO MR, GAROFANO A (2013). Entrepreneurial Orientation and Market
Orientation in SMEs: an explorative study. In: FAYOLLE A., KYRÖ P., METS T., VENESAAR U. (Editors).
Conceptual Richness and Methodological Diversity in Entrepreneurship Research. p. 197-231,
CHELTENHAM:Edgar Elgar Publishing, ISBN: 978-1-78254-730-3
RIVIEZZO A (2013). Acquisitions in Knowledge-Intensive Industries: Exploring the Distinctive
Characteristics of the Effective Acquirer. MANAGEMENT RESEARCH REVIEW, vol. 36, n. 2, p. 183-212,
ISSN: 2040-8269
RIVIEZZO A, TESTA M, MARINO V, NAPOLITANO MR (2012). Assessing the Effectiveness of
Entrepreneurial Training Programmes: Findings from a Critical Incident Analysis. INTERNATIONAL
JOURNAL OF OPERATIONS AND QUANTITATIVE MANAGEMENT, vol. 18, n. 4, p. 229-244, ISSN: 1082-
1910
RIVIEZZO A, DE NISCO A, NAPOLITANO MR (2012). Attractiveness of European Higher Education in
Entrepreneurship: a Strategic Marketing Framework. In: BURGER-HELMCHEN T. (Editor).
Entrepreneurship. Creativity and Innovative Business Models. p. 139-154, RIJEKA:InTech Web Org,
ISBN: 978-953-51-0069-0
RIVIEZZO A, NAPOLITANO M.R (2010). Italian Universities and their third mission: A longitudinal
analysis of the organization and education renewal towards the “entrepreneurial university” model.
INDUSTRY & HIGHER EDUCATION, vol. 24, n. 3 - June, p. 227-236, ISSN: 0950-4222
Member of Project Group and researcher in the following projects in last 6 years:
“Market Orientation and Entrepreneurial Orientation within Italian SMEs” – Funded by Campania
Region, 2014-2015.
“REPOS - Reti, Politiche Pubbliche e Sviluppo” - Funded by Campania Region, 2011-2013.
30
“ENDEAVOUR – Entrepreneurial Development as a Vehicle to promote European Higher Education” –
Funded by EU within the ERASMUS MUNDUS programme and developed with 17 international
partners: University of Tartu (Estonia), Universidad de Sevilla (Spagna), Universite Paris Dauphine
(Francia), National and Capodistrian University of Athens (Grecia), Helsinki School of Economics
(Finlandia), University of Bedfordshire (Regno Unito), Marmara Üniversitesi (Turchia), Petrozavodsk
State University (Russia), Lobachevski State University of Nizhni Novgorod (Russia), Universidad de
Congreso de Mendoza (Argentina), FACETE - Faculdade de Tecnologia Ciências e Educação (Brasile),
Indian Institute of Management of Bangalore (India), Tsinghua University of Beijing (Cina), Kunming
University of Science and Technology (Cina), Seconda Università di Napoli, Università Carlo Cattaneo
di Castellana, Università di Salerno, 2008-2010.
Membership
Italian Management Academy (SIMA)
European Management Academy (EURAM)
European University Network on Entrepreneurship (ESU).
Teacher from SAUM: Aurelia LITVIN (Doctor habilitatus) is full professor at State Agrarian University
of Moldova. Her teaching activities at home university are focused on management, financial
management, production management. She has rich experience in basic and applied research and
development with technology and innovation transfer to agro food sectors. Her main research areas
are: management of promoting agricultural exports, methodology of impruving the production
tehnology, financial management, business administration. She has rich experiences in cooperation
with entrepreneurs, especially trying to build links between the faculty and several enterprises.
Selected publications from last 6 years:
Litvin A., Prisăcaru V. Ways to penetrate on the foreign market. In: Scientific papers, series “Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 10(2)/2010, p. 125-129, 0.4 c.a., ISSN 1844-5640.
Litvin A. Assessing trends in foreign trade of the Republic of Moldova of involvement conditions of globalization. In: Scientific Papers, series “Management, Economic Engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 11, 2011, p. 92-98, 0.5 c.a., ISSN 2247-3527.
Litvin A., Dobrovolschi L. The effects of globalization on the foreign trade. In: Scientific papers, series „Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13, Issue 2/ 2013, p.213-221, 0.5 c.a., E-ISSN 2285-3952.
Grinciuc L., Litvin A. Enterpreneurship – a major factor in the development of moldavian economy. In: Scientific papers, series „Management, economic engineering in agriculture and rural development”,University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13,Issue 2/2013, p.175-181, 0.5 c.a., E-ISSN 2285-3952.
Litvin A. Management promotion food exports - terms and theoretical reflections In: Scientific papers, series „Management, economic engineering in agriculture and rural development”,University
31
of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13,Issue 4/2013, p. 189-195, 0.5 c.a., E-ISSN 2285-3952.
Stratan A., Litvin A. Innovotsyony method of forecasting export markets agricultural products in Moldova. The magazine of innovation "Innovation", Russia, 10(180), October, 2013, 64-68, 0,5c.a., ISSN 2071-3010.
Litvin A., Petrascu S. The foreign economic activity - an important factor in sustainable development of the Republic of Moldova , In: Scientific Papers. Series “Management, Economic Engineering in Agriculture and Rural Development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 14, Issue 3/2014, p. 158-165, 0.5 c.a., E-ISSN 2285-3952.
Litvin A., Coser C. Competitiveness and quality of agrifood products - key factors for the success of export promotion, In: Scientific Papers. Series “Management, Economic Engineering in Agriculture and Rural Development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 14, Issue 3/2014, p. 150-157, 0.5 c.a., E-ISSN 2285-3952.
Principal investigator of scientific projects in last 6 years:
Team Leader of the state project "Improved management promoting food exports under the EU neighbourhood", 2010-2012.
Chef of the project “Courses for young entrepreneurs from rural sector.” UCIP – IFAD, 2012-2015.
Team Leader of the state project "Sustainable development of the horticultural sector in the context of economic security of the country." 2015-2016.
Sustainable Development of Rural Areas of the Republic of Moldova in the context of the EU Neighborhood, institutional project, 2015-2018.
Member of:
Profile of SAUM Scientific Seminar of the specialty 521.03 Economics and management in the activity field
Profile of AESM Scientific Seminar of the specialty 521.03 Economics and management in the activity field
2.1.12. Quality Management
The responsible partners: MTTN & AITT + TUM
The teacher from AITT: Igor PLĂMĂDEALĂ – is project manager at the Agency for Innovation and
Technology Transfer of Moldova were he is employed since January 2014. He holds a master's degree
in Administration, Finance and Control from the faculty of economics of the University of Padua in
Italy. His has extensive experience in quality management due to his activity at AITT, as quality
management represents a very important element of all Technology Transfer project funded by the
agency. He also has relevant experience with quality management in international projects as he is
WP leader for Quality Management in the Tempus TechNet project. His main activity is project
writing and management thus having thorough experience in QM related to this area.
The teacher from AITT: Veronica EȘANU – is leading specialist of the Infrastructure Development
Department within the Agency for Innovation and Technology Transfer of the Academy of Science of
Moldova since September 2012. Her main responsibilities at the agency are: monitoring the
performance indicators of STP, innovation incubators and of their residents; verification the quality
32
of infrastructure development projects, verification of financial reports, etc. In addition to this, she is
responsible for quality management within the Tempus project "Technological Transfer Network".
Publications in the field of innovation:
„Innovation Infrastructure: Development Prospects” in the Intellectus 1/2014: Magazine of
Intellectual Property, p. 52
The teacher from TUM: Iuliu ȚURCAN - Assistant Professor at the Technical University of Moldova.,
Department of Economics. His teaching activities at the home university are focused on quality
management and resource planning within enterprises.
Over the last years, he has been carring out consulting activities on the implementation,
development and maintenance of quality management systems in the agro-food enterprises, among
which could be mentioned:
Consultant in the implementation of ISO 22000:2005 at the company „Pegas” SRL.
Consultant in the implementation of ISO 22000:2005 at the company „Panilino” SRL.
Consultant in the implementation of ISO 22000:2005 at the company ÎM „Fortuna Plus” SRL.
Consultant in the implementation of ISO 9001:2000 at the company ÎM „Salcuţa” SRL.
Consultant in the implementation of ISO 22000:2005 at the company ÎM „Acorex Wine Holding” SA.
ÎM “VISMOS” SA – quality manager. Member of the team of implementation of the Quality
Management System according to ISO 9001: 2000, the company being certified on 20 June 2005.
Selected publications in domeniul Managementului calitatii:
Elaborarea Sistemului de Management al Calităţii bazat pe cele 8 principii, Conferinţa Tehnico-Ştiinţifică Jubiliară a Colaboratorilor, Studenţilor şi Doctoranzilor. Rezumatele lucrărilor. Vol. 1. UTM, Chişinău, 2004, pag. 110-111.
Modalităţile evaluării şi dirijării calităţii producţiei la întreprinderile vinicole în Republica Moldova, Tehnologii moderne. Calitate. Restructurare. Conferinţa Ştiinţifică Internaţională. Vol. 5. UTM, Chişinău, 2005, pag. 237-240.
Managementul calităţii aferent procesului de aprovizionare în industria vinicolă, Conferinţa internaţională „Asigurarea unui export de succes prin managementul eficient al aprovizionării”, ASEM, Chişinău, 2006, pag. 159-165.
Direcţii strategice de sporire a performanţelor întreprinderilor vinicole din Republica Moldova, Editura Prut Internaţional, Chişinău, 2007.
Argumentarea ştiinţifică a direcţiilor prioritare de sporire a calităţii producţiei în cadrul S.A. „Orhei-Vit”, Conferinţa Ştiinţifică Internaţională „Creşterea economică – prioritate naţională în contextul integrării în Uniunea Europeană” 29-30 octombrie 2008, CEP USM, Chişinău, 2008, pag. 364-367.
Crearea unui Sistem de Management al Calităţii integrat – bază pentru asigurarea calităţii în sectorul viti-vinicol, Conferenţa ştiinţifico-practică „Criza economică mondială: protejarea şi promovarea producătorului din Republica Moldova”, Chişinău, 2008, pag. 171-174.
2.1.13. Philosophy of Science
The responsible partners: USM (alternative to S.01.A.006)
33
The alternative course “Strategic Management” (S.01.A.006) was chosen in the master programme
pilot run, so the teacher selection for “Philosophy of Science” (S.01.A.007) has not been needed to
perform.
2.1.14. Business Culture
The responsible partners: SAUM (alternative to S02A113)
Teacher from SAUM: LITVIN Aurelia (Doctor habilitatus) is full professor at State Agrarian University
of Moldova. Her teaching activities at home university are focused on management, financial
management, production management. She has rich experience in basic and applied research and
development with technology and innovation transfer to agro food sectors. Her main research areas
are: management of promoting agricultural exports, methodology of impruving the production
tehnology, financial management, business administration. She has rich experiences in cooperation
with entrepreneurs, especially trying to build links between the faculty and several enterprises.
Selected publications from last 6 years:
Litvin A., Prisăcaru V. Ways to penetrate on the foreign market. In: Scientific papers, series “Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 10(2)/2010, p. 125-129, 0.4 c.a., ISSN 1844-5640.
Litvin A. Assessing trends in foreign trade of the Republic of Moldova of involvement conditions of globalization. In: Scientific Papers, series “Management, Economic Engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 11, 2011, p. 92-98, 0.5 c.a., ISSN 2247-3527.
Litvin A., Dobrovolschi L. The effects of globalization on the foreign trade. In: Scientific papers, series „Management, economic engineering in agriculture and rural development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13, Issue 2/ 2013, p.213-221, 0.5 c.a., E-ISSN 2285-3952.
Grinciuc L., Litvin A. Enterpreneurship – a major factor in the development of moldavian economy. In: Scientific papers, series „Management, economic engineering in agriculture and rural development”,University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13,Issue 2/2013, p.175-181, 0.5 c.a., E-ISSN 2285-3952.
Litvin A. Management promotion food exports - terms and theoretical reflections In: Scientific papers, series „Management, economic engineering in agriculture and rural development”,University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 13,Issue 4/2013, p. 189-195, 0.5 c.a., E-ISSN 2285-3952.
Stratan A., Litvin A. Innovotsyony method of forecasting export markets agricultural products in Moldova. The magazine of innovation "Innovation", Russia, 10(180), October, 2013, 64-68, 0,5c.a., ISSN 2071-3010.
Litvin A., Petrascu S. The foreign economic activity - an important factor in sustainable development of the Republic of Moldova , In: Scientific Papers. Series “Management, Economic Engineering in Agriculture and Rural Development”, University of Agricultural Sciences and Veterinary Medicine Bucharest, Volume 14, Issue 3/2014, p. 158-165, 0.5 c.a., E-ISSN 2285-3952.
34
Principal investigator of scientific projects in last 6 years:
Team Leader of the state project "Improved management promoting food exports under the EU neighbourhood", 2010-2012.
Chef of the project “Courses for young entrepreneurs from rural sector.” UCIP – IFAD, 2012-2015.
Team Leader of the state project "Sustainable development of the horticultural sector in the context of economic security of the country." 2015-2016.
Sustainable Development of Rural Areas of the Republic of Moldova in the context of the EU Neighborhood, institutional project, 2015-2018.
Member of:
Profile of SAUM Scientific Seminar of the specialty 521.03 Economics and management in the activity field
Profile of AESM Scientific Seminar of the specialty 521.03 Economics and management in the activity field
2.1.15. Applied English
The responsible partners: TUM
The teacher from TUM: Stela GUVIR – MSc in English Language and Literature. Currently, she is also
the head of the VET Department at the National Agency for Quality Assurance in Proffessional
Education. Mrs. Guvir has 9 years of teaching experience at TUM. Courses taught: “English for
Mechanics”, “English for Business Studies”, and “English for Engineering”. She has been involved in
11 national and international projects as member of different task force missions, conducting
research, benchmark analyses, writing reports, translating and providing expertise in different areas,
such as academic autonomy, implementation of a sustainable e-learning system, development and
implementation of the quality management system at the university etc.
Selected publications from last 6 years:
Cucu O., Todos P., Guvir S., Ghencea C. “Streamlining the management of internships – an imperative of the time”, in Meridian Ingineresc, Technical and applied scientific publication founded in 9 February 1995, nr. 2, 2014, Journal of Technical University of Moldova and Moldavian Engineering Association, ISSN 1683-853X, published by Technical University of Moldova, pag. 32-34.
Guvir Stela „Managementul online al stagiilor de practică” în ziarul „Mesager Universitar”, Anul XVI. Nr. 9 (157). Noiembrie 2013. Ediţie lunară. 8 pagini, pag. 4.
Nicolae Secrieru, Petru Todos, Guvir Stela, Ghencea Cristina “Architecture of Interuniversity's Digital Network in Applied Science Themes and Economics in Moldova "CRUNT". In Quality and efficiency in e-learning. Proceedings of the 9th International Scientific Conference "eLearning and Software for Education" Bucharest, April 25 - 26, 2013. Volume 2. Publisher: Editura Universitatii Nationale de Aparare "Carol I" (ISSN: 2066 - 026X print 2066 - 8821 online)
Stela Guvir, Alexandra Gherasim, „Negaţia polemică ca strategie argumentativă”, la Simpoziunul ştiinţifico-practic interuniversitar cu tema Cultivarea limbii române în condiţiile comunicării actuale, Universitatea de Stat din Moldova, Facultatea de Litere, Catedra Limba Română, 25 mai 2012
Petru Todos, Nicolae Secrieru, Stela Guvir “Tempus Project «Creating Digital Network Universities in Applied Science Themes and Economics in Moldova (CRUNT)»”, Proceedings of the 7th International
35
Conference on Virtual Learning, November 2-3, 2012, MODELS & METHODOLOGIES, TECHNOLOGIES, SOFTWARE SOLUTIONS, Phase II - Period 2010-2020: e-Skills for the 21st Century, Editura Universităţii din Bucureşti, 2012, ISSN: 1844-8933, pag. 333-338 (http://c3.cniv.ro/?q=2012)
Stela GUVIR, Alexandra Gherasim, „Contestaţia – funcţie a negaţiei” la Conferinţa ştiinţifică cu participare internaţională „Interferenţe universitare – integrare prin cercetare şi inovare”, 25-26 septembrie 2012, USM
Chiciuc Andrei, Todos Petru, Ţicul Stela, „Sistem de evaluare a performanţei programelor de studii”, în Analele Ştiinţifice ale Universităţii Cooperatist-Comerciale din Moldova, Numărul 8 / 2011 / ISSN 1857-1239, pag. 60-65 (https://ibn.idsi.md/en/vizualizare_numar_revista/51/1058)
Ţicul Stela, „Similitudini şi diferenţe în utilizarea prefixelor negative în limbile română şi engleză”, la Colocviul internaţional de ştiinţe ale limbajului „Egueniu Coşeriu” (Chişinău-Suceava-Cernăuţi), ediţia a XI-a, Chişinău, 12-14 mai 2011, Secţiunea „Victor Banaru. Gramatică, semantică şi pragmatică”.
Ţicul Stela, Gherasim Alexandra, „Răspunsul negativ şi exprimarea dezacordului”, USM, Conferinţa ştiinţifică „Dezvoltarea cercetării ştiinţifice, promovarea şi cultivarea creativităţii şi a inovării în procesul instruirii academice”, dedicată aniversării a 64 ani de la fondarea USM, 5 mai 2010, CEP USM, Chişinău, 2010.
Stela Ţicul, Andrei Chiciuc, Petru Todos, „Tehnici de căutare a unui loc de muncă. Ghid”, Lucrarea a fost elaborata în cadrul Proiectului 1444544 Tempus 2008-FR-JPHES „Dezvoltarea de parteneriate cu întreprinderile din Republica Moldova”, Chişinău, UTM, 2010.
Stela Ţicul, Alexandra Gherasim, „Negaţia lingvistică şi metalingvistică în textul dramatic”, Scientific Conference of Master and Doctoral Students “Research and Innovation – Perspectives of Evolution and European Integration”, 23 September, State University of Moldova Press, Chisinau, 2009, p. 109-110.
2.1.16. Business Law
The responsible partners: USARB
The teacher from USARB: Corneliu VRABIE (PhD, lect. super.) he has the PHD degree in law, full
university lecturer at Alecu Russo Balti State University, Moldova, Department of Law, The Faculty of
Law and Social Sciences. His teaching activities at home university are focused on qualified legal
assistance in civil matters, the rights of the consumers, the family, the fields of commercial,
contravention and penal matters. He is a scientific researcher in the Laboratory of Comparative
Private Law. He is the tutor and the adviser regarding the free legal aid within the University Legal
Clinic, supported by the American Lawyers’ Association.
Selected publications from last 6 years:
VRABIE, C. The name of the natural person in the private international law, "The National Law
Journal", No. 6/2008, p. 75-78.
VRABIE, C. Judicial declaration of the suspected death- material and conflict law aspects, in the
"Procedural Law Journal", No.2, 2008, Targu Muresh.
36
VRABIE, C., Specifications related to the corroboration of some regulations from the Civil Code in
matters of legal capacity of the foreigners, in Materials of the International Conference "Civil Code of
Moldova 5 years of implementation - problems, achievements and prospects", September 18-19
2008, Kishinev.
VRABIE, C., The problems of international private law referred to the residence of the natural person,
in the "National Law Journal", Kishinev, No. 12/2008, p. 45-49 etc.
VRABIE, C., The concept of marriage in the spirit of the Universal Declaration of Human Rights and
the evolution of the concept in subsequent regulations, in Materials of International Conference
from 11.12.2008, Faculty of Law, Alecu Russo Balti State University, title "Universal Declaration of
Human Rights - pillar in the legal protection of fundamental rights and freedoms within 60 years."
Kishinev: Pontos Ed. 2009 etc.
37
3. Detailed calendar of lessons and activities
The detailed calendar of the lessons and activities required by deployment of developed master
course programme was produced by MD universities lead by USM with respect to Moldovan rules
and regulation as well as the habits and systems of educational process realisation in particular
universities. The calendar was also discussed and synchronised with teachers from EU partner
universities with the goal to synchronise their duties at home universities and one week teaching in
Moldova. Because of the limitation on the length of stay of EU teachers in Moldova for one week the
3 weeks block teaching for each module was implemented. It means that the EU teachers realise 14
hours contact teaching within their one week mobility at Moldovan partner university and the rest of
contact teaching - two weeks covering 21 contact hours - is realised by the selected teacher from MD
partner university.
38
4. Conclusions
Applying the strict and clearly defined criteria for TEMPUS TecTNet teacher selection allowed
building highly specialised teaching team ensuring high quality of education within the developed
study program. Although the teacher from EU countries have been involved only in the pilot run of
the developed master study program, the quality of selected teacher from Moldova ensures that the
quality of educational process will keep the quality standard also in the future when the program will
be realised only by the staff of Moldovan universities and agencies.