recessed adjustable knife aperture 3-light trimless...
TRANSCRIPT
DESCRIPTION• Three light recessed accent / downlight -Small size• All steel 18GA construction with powder coat finish• Trimless insert with 4” x 12” open aperture• Perforated metal mesh frame for mudding right to the aperture• Vent holes for cooler operating temperature• Knife-like trimless aperture edge with angle sleeve walls for clean look• Ceiling Cut-Out - 7.06” x 16.38”
LED Source• Field-replaceable integral LED module• Field-changeable optic• Bridgelux / CREE / ValuDIM™
• Accepts up to 2 or more optical accessories• Single gimbal lamp holder with tilt aiming• Yoke with 360º+ rotation• Regressed adjustable yoke• Bi-Directional Horizontal travel for extreme aiming
ELECTRICAL• Field-replaceable integral LED driver• Electrical wiring compartment integrated into housing construction• Thermal protection• Easy maintenance access through ceiling opening• Rated for through-branch wiring• Dimmable
MOUNTING• Butterfly brackets for commercial installation in drywall, and other mud in
ceiling types• Perforated plate adjusts for 1/2”, 5/8”, 3/4” & 1.0” ceiling thickness• Heavy-Duty L-Bars™ hanger bar system ordered separately
• LF #LBARS4PK
LABELS• Suitable for damp location
CATALOG NUMBERTYPEPROJECT
4.00”(102)
Accommodates 1/2”, 5/8”, 3/4” & 1.0”
Ceiling Thickness
Integral Power Supplies& Wiring Compartment
5.42”(138)
3
12.00” (305)
1
4.00” (102)40º40º
2
12.47”(317)
11.47”(291)
17.40” (442)*21.40” (544) / IC
1
1/2”5/8”3/4”1”
AdjustableCeiling
Thickness
Fourlockingheight
positions
Trimless installation
3
Shown with snoot accessory
2
TiltAction
360ºRotation
Bi-DirectionalHorizontal
Travel
Enable greateraiming capability
Yoke &Gimbal
(GG)
MULTIFORMS - MF100 SeriesRECESSED ADJUSTABLE KNIFE APERTURE 3-LIGHT
TRIMLESS LED SMALL
HEADQUARTERS
9200 Deering Avenue
Chatsworth CA 91311
Telephone: 818-885-1335
Toll Free: 855-885-1335
Fax: 818-576-1335
Measurements in ( ) are metric equivalents.* IC housing dimension
C US
®
LimitedLimitedORDERING INFO
SERIESLED MODULE WATTAGE AND INFORMATION CRI / COLOR BEAM HSG TYPE DRIVER / VOLTAGE FINISH OPTIONS
MF13BN-S MULTIFORMS MF100 Series Recessed 3-Light Knife ApertureAdjustable AccentTrimless Fixture New Construction Housing
CREE08C 08W LED / 1094lm13C 13W LED / 1473lm19C 19W LED / 2117lm
Delivered @ 80CRI / 3000KNarrow Beam
8027 80CRI / 2700K8030 80CRI / 3000K8035 80CRI / 3500K8040 80CRI / 4000K9227 92CRI / 2700K9230 92CRI / 3000K9235 92CRI / 3500K9240 92CRI / 4000K
CREE N Narrow 16°M Medium 28°W Wide 42°V Very Wide 73°
GG Regressed Yoked Gimbal
DMU Dimming MultipleForward/Reverse Phase (@ 120V only)0-10V Wires Present(@ 120-277V)D31 Lutron LTEA Hi-lume™ Forward Phase 1% (@ 120V only)DEU Lutron LDE1/PEQ1Hi-lume™ EcoSystem™
1% with Soft-On, Fade-to-Black™
DPU Lutron PEQ0 Hi-lume™
Premier™ 19w max. 0.1% with Soft-On, Fade-to-Black™
BB Black
WW White
IC* Insulated Ceiling
For Emergency LED Inverter Options See Page 4
* See drawing for extended length dimension
ValuDIM™15V 15W LED / 876lm Delivered3000-2000KWarm Dimming
Delivered @ 92CRI / 3000KNarrow Beam
9220 92CRI / 3000-2000K92209220 Warm Dimming ValuDIM Only
ValuDIM™N Narrow 17°M Medium 25°W Wide 38°
Example: MF13BN-S-13C-8027-N-GG-DMU-BB-IC
www.lfillumination.comPAGE 1
rev: 042420
©2020 LF ILLUMINATION LLC
We reserve the right to change or
withdraw specifications without prior notice.
ACCESSORIESMF100 SMALL
ACCESSORY DESCRIPTION ORDER CODE
Clear Lens OPTB-CLR
Clear Lens - LED Film OPTB-L-CLR
UV Lens OPTB-UVL
Hex Cell Louver OPTB-HXL
Diffusion Lens OPTB-DFL
Diffusion Lens - LED Film OPTB-L-DFL
Linear Spread Lens OPTB-LSL
Linear Spread Lens - LED Film OPTB-L-LSL
Prismatic Spread Lens OPTB-PSL
1” Snoot - Black OPTB-SNB
1” Snoot - White OPTB-SNW
1” Snoot - White With Black Splay OPTB-SNWB
Heavy Duty Hanger Bar SystemSet of 4 bars - Good for one fixture(See next page for details)
LBARS4PK
* Other filters, colored glass, dichroics & micro-lenses available upon request
HEADQUARTERS
9200 Deering Avenue
Chatsworth CA 91311
Telephone: 818-885-1335
Toll Free: 855-885-1335
Fax: 818-576-1335
©2018 LF ILLUMINATION LLC
We reserve the right to change or
withdraw specifications without prior notice.
1.00”(25)
www.lfillumination.comPAGE 2
rev: 080618
©Tripar® 08/2016 Patent Pending
T-bar slot
Auxiliary nailing hole
Five-feature integral nail
Slot to allow upper tab to deflect
Optional T-bar locking hole, for #8 self-tapping
screw
Tabs for joist positioning
The parts are assembled by aligning the end of one, with the alignment marks of the other.
L-shaped cross section for each member, when assembled together provides a ½” X 1 ½” C-Channel shaped profile for superior rigidity.
Consists of two identical parts in all aspects, therefore interchangeable. Fits into C-Channel notches in Butterfly Bracket. Item #LBARS4PK - 4 pack of bars included (Good for 1 fixture). – Four L-Bars required per fixture.
L-Bars™ - Feature Overview
Marking lines for 12”, 16” & 24” joist spacing & 24” T-bar, allow locking before affixing to ceiling
For 12” joist spacing,
Cut to relief hole
Optional: To lock, pry arrowhead outward or push in
1
2
- Provided on a confidential basis
Hole/Slot for nailing to underside of joist. Slot allows up to 5/8” lateral fixture adjustment or
removal
36’’- 48’’ capacity with addition of 1 or 2 more identical members
Alignment marks for easy assembly
Contains integral nails, which are:
1. Located as far away as possible from the main bar to permit easy nailing.
2. Oriented parallel to joist wood grain for easier installation.
3. Toothed to resist pullout. 4. The sharpest available achieved through a
proprietary process. 5. Retracted and surrounded for added safety
prior to installation
10’’- 24’’ **
Fastenerless bar hanger extension lock, accessible from side or bottom. Using pliers, twist until vertical
*
**
*
Installation videos available at www.TriparInc.com/L-Bar
L-Bars™FEATURE OVERVIEW
HEADQUARTERS
9200 Deering Avenue
Chatsworth CA 91311
Telephone: 818-885-1335
Toll Free: 855-885-1335
Fax: 818-576-1335
2018 LF ILLUMINATION LLC
We reserve the right to change or
withdraw specifications without prior notice.
HEADQUARTERS
9200 Deering Avenue
Chatsworth CA 91311
Telephone: 818-885-1335
Toll Free: 855-885-1335
Fax: 818-576-1335
HEADQUARTERS
9200 Deering Avenue
Chatsworth CA 91311
Telephone: 818-885-1335
Toll Free: 855-885-1335
Fax: 818-576-1335
www.lfillumination.comPAGE 3
rev: 061518
CATALOG NUMBERTYPEPROJECT
EMERGENCY INVERTERS
LED ELV MLV
HEADQUARTERS
9200 Deering Avenue
Chatsworth CA 91311
Telephone: 818-885-1335
Toll Free: 855-885-1335
Fax: 818-576-1335
©2020 LF ILLUMINATION LLC
We reserve the right to change or
withdraw specifications without prior notice.
www.lfillumination.comRev: 010820
The emergency inverter provides full power up to its load rating for no less than 90 minutes as prescribed by UL 924 Listed for US and Canada & CSA C22 No. 141 Unit Equipment for Emergency Lighting.
The inverter is installed remotely, behind an access panel or with above ceiling access required (behind grid ceilings are also acceptable). The inverter is not accessible through the fixture opening in the ceiling. The inverters are rated for 120-277V and will work for LED, ELV, MLV, incandescent & fluorescent loads.
The inverter is paired for the connected load wattage of the light source(s).
If the load rating requirement is 25W (or less) then we recommend LF #EMREM25 IOTA #IIS-25-I: http://www.iotaengineering.com/iis25.htm Instructions: http://iotaengineering.com/Inverter/iis25_manual.pdf Wiring Diagram: http://iotaengineering.com/diagrams/ad10.pdf
If the load rating requirement is 25-35W then we recommend LF #EMREM35HE IOTA #IIS-35-HE: https://www.iotaengineering.com/Inverter/iis35he_spec.pdf Instructions: https://www.iotaengineering.com/services/#/manuals/iis35he Wiring Diagram: https://www.iotaengineering.com/services/#/diagrams/iis35he
If the load rating requirement is 35-50W then we recommend LF #EMREM50 IOTA #IIS-50-I: http://iotaengineering.com/Inverter/iis50_spec.pdf Instructions: http://iotaengineering.com/Inverter/iis50_manual.pdf Wiring Diagram: http://iotaengineering.com/diagrams/ad10.pdf
Consult LF Illumination for higher wattage inverter offerings.
25W
35W
50W
* 35 version features high-efficiency performanceto help meet CEC Title 20 efficiency requirements