File No- 282/U/16/20/2017/Medical Furniture Dated:18 /05/2018

NOTICE INVITING RE-TENDER Re-E-tenders in two bid system through 'e" procurement solution are invited from reputed

manufacturers/or their sole authorized dealers for SUPPLY OF THE HOSPITAL FURNITURE' in a 100

bedded ESIC Hospital Varanasi, 221002. Tender documents are available on line from 18.05.2018 at

https://esictenders.eproc.in.

Bidders have to deposit the Earnest Money Deposit (EMD) of Rs 250000.00 (Two lacs fifty

thousand only) in the form of Demand Draft drawn in favour of "ESI Fund A/c No.1"

payable at Varanasi.

The interested tenderers should upload duly filled tender form and their bids along with

scanned copies of all the relevant certificates, documents, etc. in support of their technical

& price bids - all duly signed on the website https://esictenders.eproc.in latest by

08/06/2018 till 1.00 PM. The technical bids will be opened online on 08/06/2018 at 2.00 PM

at office of Medical Superintendent ESIC Hospital Varanasi. Tender documents are also available for viewing on the websites of Employees' State

Insurance Corporation i.e. www.esic.nic.in.

Medical Superintendent

Important Instructions for Bidders regarding Online Payment All bidders/contractors are required to procure Class-IIIB Digital Signature Certificate (DSC) with Both DSC Components i.e. Signing & Encryption to participate in the ETenders. Bidders should get Registered at https://esictenders.eproc.in. Bidders should add the below mentioned sites under Internet Explorer Tools≥ Internet Options Security Trusted Sites≥ Sites of Internet Explorer : https://esictenders.eproc.in https://www.tpsl-india.in https://www4.ipg-online.com Also, Bidders need to select “Use TLS 1.1 and Use TLS 1.2” under Internet Explorer Tools Internet Options Advanced Tab Security. Bidder needs to submit Bid Processing Fee charges of Rs. 2495/- (non-refundable) in favour of M/s. C1 India Pvt. Ltd., payable at New Delhi via Online Payment Modes such as Debit Card, Credit Card or NetBanking for participating in the Tender.

Bidders can contact our Helpdesk at https://esictenders.eproc.in/html/Support.asp

RE-Tenders under Two Bid system through 'e' procurement solution are invited by Medical Superintendent, ESIC Hospital, Pandeypur for the supply of following items required for ESIC Hospital, Pandeypur .

Sl. No. Name of the Item Quantity

1 Fowler Cot with mattress and iv stand 25

2 Semi Fowler Cot with mattress 50 3 Bed Side Lockers

85

4 Saline Stand 75 5 Examination Table 22

6

Gynecology examination table 03

7 Stretcher trolley 10 8 Wheel chair 10 9 Over bed table 100

10 Crash cart 13 11 Mayo stand 05 12 Dressing trolley 10 13 Instrument Trolley 06 14 O2 cylinder stand 10 15 Seamless Dressing drum small 10

medium 16 large 10

16 Steps (double step) 24 17 Urinals Male 50

Female 50 18 Bed Pan 50 19 Bed Side Screen 20 20 Labor Table 02 21 Basin stand 10 22 Instrument cabinet 04 23 Stainless steel basin 10 24 Formalin chamber 02 25 Medicine trolley 10 26 Pediatric bed with mattress 15 27 Patient revolving stool 20 28 Surgeon chair (Arm less with back support) 04 29 Soil linen trolley with canvas bag 10 30 Suction macheine 0.25 HP 09 31 Patient shifting trolley (Stretcher advanced) 03 32 Instrument Tray Large (15”-12”) 10

Medium ((9”-5”) 10 33 X ray view Box Single film 10

Double film 02 34 Kidney tray small 10

medium 20 large 10

RE-Tender documents are available on line from 18.05.2018 (https://esictenders.eproc.in). Bidders have to deposit the Earnest Money Rs 250000.00 (Two lacs fifty thousand only) Deposit as detailed above through DD/ Bankers Cheques drawn in favour of “ESIC Fund A/C No. 1” payable at Varanasi.

The interested tenderers should upload duly filled tender form and their bids along with scanned copies of all the relevant certificates, documents, etc. in support of their technical & price bids all duly signed on the website https://esictenders.eproc.in latest by 08.06.2018 up to 01:00 PM.

EMD and Undertaking (Annexure-V) shall also be submitted physically (Physical hard copy) along with Demand Draft/ Banker‟s Cheque of Earnest Money Deposit (E.M.D.) as stated above in favour of ESIC Fund Account No.1.

The envelope containing EMD and Undertaking (Annexure-V) should be dropped in the Tender Box kept in Office of Medical Superintendent, ESIC Hospital, Pandeypur before closing date and time. The technical bids will be opened online on 08.06.2018 at 2.00 PM.

Hard Copy of EMD and Undertaking (Annexure-V) received late will not be

considered. Proof of postage/courier won‟t be considered as a claim for timely submission of tender. All the bids received will be opened on the same day at 2.00 pm. Bidders or their authorized representative (with authority letter & ID Proof) may be present if they wish to be. In case 08.06.2018 is declared a holiday, bids will be opened on next working day at the same time & venue. Bid without Earnest Money deposit will not be accepted.

E-Tender documents is also available for viewing on the tenders link of the websites of ESIC www.esic.nic.in and https://esictenders.eproc.in.

Any corrigendum to this letter will be notified through the aforesaid website

Annexure I

TERMS AND CONDITIONS FOR THE SUPPLY OF HOSPITAL FURNITURE

1) Sealed Tenders will be received upto and including the date stipulated by the Medical Superintendent, ESICHospital, Pandeypur, Varanasi 221002 for the purchase of Hospital furnitures.

2) The sealed envelope containing the completed tender duly superscribed as 'TENDER FOR SUPPLY OF HOSPITAL FURNITURES should be addressed to The Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi.

3) Postal delays if any, will not be condoned. 4.) Tenders will be opened at the office of the Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi 221002 on the stipulated date & time in the presence of the tenderer s / representatives who choose to be present.

5) The rates quoted should be F.O.R Destination, freight prepaid in full, no Handling, Clearing or transport charges etc. will be paid. While quoting the rates it should be specifically stated that the rates are excluding the GST/Customs Duty. The delivery should be at the Medical Stores, Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi between 10 AM to 3 PM except Saturday and holiday.

6) The tender should be type written and every correction in the tender should invariably be attested

by full signature by the tenderer with date before submission of the tenders to the authorities concerned failing which the tender is liable for rejection.

7) The rates quoted in the tender must be both in words and in figures.

8) A Certificate that the quoted rates are not been supplied to any other organization at a rate, lower than quoted here should be enclosed.

9) Copies of purchase order for having supplied to Government Hospitals / reputed institutions (of the quoted equipment) should be enclosed with certificate duly authenticated from any other users of the equipment on satisfactory performance (Anx.VI) is to be enclosed.

10) Firms should also give a certificate that spares/consumables/ of the items quoted will be freely available at least for five years after the warranty period.

11) Successful bidder shall not be entitled to any rate revision of price for any reason except that allowed by Government of India.

12) The firm service center to which correspondence during the Period of finalization of contract, warranty, could be made and accordingly notifies the address of Office.

13) Undertaking on Guarantee/ Warranty (Comprehensive) for 3 years after purchase has to be mentioned in the Document.

14) The firm should undertake to enter into Annual Maintenance Contract for at least for 5 years after completion of warranty and accordingly quote the rates in the tender document.

15) The rates for AMC (Labour) should not exceed 3% and for CMC should not exceed 10% of the unit cost and should remain fixed for five years.

16) The Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi, will have the liberty to terminate the tender proceedings without assigning any reasons thereof at any level of tender proceeding.

17) The bidder will not be entitled for any compensation for whatsoever in respect of such termination.

18) One copy containing terms and conditions and schedule of this tender should be signed by the tenderer at the bottom of each page with the office seal duly affixed and returned along with the tender.

19) Declaration form and Company profile formats enclosed must be filled in and signed by tenderer and enclosed along with the tender. Tenders received without the Declaration form shall

not be considered. 20) No articles shall be supplied to the Hospital except on requisition in writing signed by the

Medical Superintendent or by an officer authorized by him in writing to do so. 21) The contract should not be sublet without the prior written permission of the Medical

Superintendent. 22) TENDER DOCUMENTS THAT ARE BEING SUBMITTED IN PERSON ARE TO BE

DROPPED IN THE TENDER BOX KEPT IN office of Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi 221002.

23) Bidders in their own interest shall ascertain the eligibility of whatsoever concessions and

exemptions eligible and applicable to the hospital and shall advise the purchaser and quote accordingly. Bidders shall indicate the actual amount eg. Octroi, GST etc. which becomes otherwise payable in the extreme event of hospital authorities not in a position to release certificates like octroi exemption certificate, Form D etc..

24) Bid Security (EMD)

The tender must be accompanied by EMD (3% of total tender value) in the form of Demand Draft only drawn in favour of “ESI Fund account No-1”, payable at Varanasi. The tenders not accompanied by EMD is liable for rejection. Advance stamp receipt for the refund of EMD should be enclosed with the tender documents.

26) PERFORMANCE SECURITY The successful bidder should furnish Performance Security Deposit @ 10% of the value of the contract. 27) VALIDITY PERIOD OF TENDER. The rates quoted should be valid for one year from the date of approval of the Tender and the quantity mentioned is on the basis of present requirement which are to be supplied within the stipulated period mentioned in the tender. During the currency of Tender orders are to be executed by the successful Tenderer at the tender rate as per future requirements. 28) DEMONSTRATION OF FURNITURES The visit to manufacturer‟s factory/ plant if required will be undertaken by outside Inspection agency or team of expert by tendering authority to verify the capability, production facilities and to verify infrastructure if required can be taken by the Hospital. Demonstration of the quoted product should be mandatory and it can be carried out before price bid opening 29) Penalty Clause - Supply is to be made within three to four weeks after placement of supply order. For late supply cumulative penalty for every week @ 2% of value of order will be recovered. 30) The payment towards the supply is subject to receipt of inspection note/ performance certificate to the effect that the items supplied are conforming to the supply order placed. 31) Bidder should be ISO 9001: 2015, ISO 13485:2003, ISO 14001:2015 and & BS OHSAS 18001:2007 certified. (Valid certificate should be attached with technical bid). 32) All Mild steel parts should be In-house pretreated and anti-microbial epoxy powder coated 50 to 100 microns thickness. 33) Anti-microbial oven baked powder coating process for achieving smooth, uniform finish and superior bonding properties which prevent growth of bacteria. 34) Salt spray test, Impact test to be carried out in manufacturing premises. Incoming material inspection process for 100% of all raw materials. 35) Stainless steel should be 304 grade and validated by Govt. approved and NABL certified laboratory. Test reports should be attached with technical bid.

OTHER TERMS AND CONDITIONS Evaluation of technical and financial bid

1. The Tenderers are required to upload two separate Bids i.e. - Technical and Financial, as per preformed available online. Financial bid has to be uploaded online only.

2. Each attached document should be signed and stamped by bidder or its authorized representative of

Tenderer. 3. The competent authority of ESIC reserves the right to reject all or any tender in whole or in part,

without assigning any reason thereof. 4. The financial bid of the bidders, whose technical bid is found to be responsive as per the eligibility

and other tender conditions, will be opened in the presence of the bidders, who choose to attend the opening of financial bid. The date and time of opening shall be intimated.

5. Lowest financial bid will be evaluated based on overall lowest rate quoted by the bidder. 6. The earnest money shall be refunded to the unsuccessful Tenderers after finalization of the contract.

It shall be refunded to the successful Tenderer on receipt of performance security deposit. No interest is payable on the EMD.

7. The bid shall be valid for 180 days from the date of opening.

8. Tender incomplete or Conditional in any form will be rejected outright.

9. In case the successful tenderer declines the offer of Contract, for whatsoever reason(s), his EMD will

be forfeited. 10. A formal contract shall be entered into with the successful tenderer. In this contract, the successful

tenderer shall be defined as Contractor.

11. Tenderer shall have annual audited turnover of minimum two crore in last three AY 2015-2016, 2016-2017, 2017-2018.

12. Medical Superintendent, ESIC Hospital, Pandeypur Varanasi reserves the right to decrease/increase the quantity of any item or reject/accept any or all tenders without assigning any reason thereof at any time of tender process. No correspondence (verbal/written) will be entertained in this regard.

Performance Security Deposit The successful tenderer will have to deposit a Performance Security Deposit of 10% of total

tender value by way of Bank Guarantee from a scheduled commercial bank in favour of

“Medical Superintendent, ESIC Hospital Varanasi” valid for 60 days beyond the expiry of

contract. The successful Tenderer will have to deposit the Performance Security Deposit and commence

the work within 15 days of acceptance of tender. Otherwise the contract will be cancelled and

EMD will be forfeited.

MEDICAL SUPERINTENDENT

Annexure II

TECHNICAL BID FORM- (Sample)- To be filled online only)

„SUPPLY OF THE FOLLOWING HOSPITAL FURNITURE' IN ESIC HOSPITAL, PANDEYPUR, VARANASI

1 NAME OF TENDERING

COMPANY / FIRM

2 NAME OF OWNER / PARTNERS/ DIRECTORS

3 ADDRESS OF OFFICE/OFFICES

FULL PARTICULARS OF

OFFICE

4. ADDRESS WITH TELEPHONE NO., FAX NO. & E-MAIL ADDRESS

5 Is Your firm Registered under Indian Factories Act Companies Act Any other Act

6 Is Your firm is small scale industry Registered with appropriate authority

5. REGISTRATION DETAILS :

(A) GST NO.

(B) TAN NO

(C)PAN NO.

6 BANK DETAILS

NAME & ADDRESS OF BANK

ACCOUNTS NO.

IFSC CODE

7 Product certified by ISO/ ISI

8 Trade License

9 Authorization certificate of manufacturer in case of dealer/distributer

10 Certificate that the quoted rates are not been supplied to any other organization at a rate, lower than quoted here.

11 Copies of purchase order for having supplied to Government Hospitals / reputed institutions (of the quoted equipment) should be enclosed with certificate duly authenticated from any other users of the equipment on satisfactory performance is to be enclosed.

12 Firms should also give a certificate that spares/consumables/ of the items quoted will be freely available at least for five years after the warranty period

13 The firm has its Service Center address to which correspondence in R/O warranty could be made.

14 Undertaking on Guarantee/ Warranty (Comprehensive) for 3 years after purchase has to be mentioned in the Document

15 The firm should undertake to enter into Annual Maintenance Contract for at least for 5 years after completion of warranty and accordingly quote the rates in the tender document

16 The rates for AMC (Labour) should not exceed 3% and for CAMC should not exceed 10% of the unit cost and should remain fixed for five years.

17 Catalogue/literature containing make & model of the Equipment offered

DETAILS FINANCIAL STATEMENT, PROFIT AND LOSS STATEMENT DURING LAST THREE YEARS.

S.No. ASSESMENT YEAR

INCOME (RS.)

EXPENDITURE(R S.) NET PROFIT / LOSS

1 2015-16

2 2016-17

3 2017-18

SIGNATURE OF OWNER/MANAGING PARTNER/DIRECTOR

DATE: NAME:

PLACE: SEAL:

Annexure III

FINANCIAL BID FORM – (To be filled online only)

SUPPLY OF THE HOSPITAL FURNITURES IN ESIC HOSPITAL, PANDEYPUR, VARANASI Name of Tenderer along with address, E-Mail & Telephone No.:

FINANCIAL BID FOR MEDICAL FURNITURES

Serial no

Name of Item Quantity ( Price) Total Unit Rate (a+b+c)

Total Price (in figure & words)

Unit rate inclusive of all expense excluding Tax & other statutory taxes (a)

Sale tax/ GST if any(%age & value) (b)

Any Other statutory taxes (if more pl specified separately) (c)

1

DATE: SIGNATURE OF THE TENDERER: SEAL: NAME & ADDRESS:

Annexure IV (Authorization Letter)

To, The Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi (U.P.) Dear sir, Authority letter against Tender no.____________________________due on___item quoted__we__who are established and reputed manufacturers of__having factory at__and hereby authorize M/s__(name and address of agent ) to bid, negotiate and conclude the contract with your institution against above tender for the above goods manufactured by us. We hereby extend our full guarantee /warranty as per clause 'B' of special terms and conditions of tender for the goods offered for supply against this invitation of bid from above firm. We also confirm that the spares and any other miscellaneous items (as applicable) of the equipment quoted will be freely available for at least five years after expiry of warranty /guarantee period. Our other responsibilities include: 1. Information regarding the name of new agent, in case of change of agent 2.__ (here specify in detail manufacturer's responsibilities) The services to be rendered by M/s__are as under 1. 2. (here specify the services rendered by the agent) Yours faithfully Signature and Name of the Manufacturer With address and seal Note: This letter of authorization should be on the letter head of the manufacturing concern and should be signed by a person competent and having the authorization to issue said certificate on behalf of the manufacturing firm. The said certificate should also bear the signature of participating tenderer as a witness (Original copy to be uploaded).

ANNEXURE-V UNDERTAKING

Date of Opening: _________

To, The Medical Superintendent ESIC Hospital, Pandeypur Varanasi (U.P.) Sir, 1. The undersigned certifies that I have gone through the terms and conditions mentioned in the tender document including annexure and undertake to comply with them. The rates quoted by me/us are valid and binding on me/us for acceptance for the period of one year from date of opening of tender. 2. It is certified that rate quoted are the lowest quoted for any institution/hospital in India. 3. Earnest money deposited by me/us viz Rs _____ in the form Demand Draft/Bank guarantee from any commercial bank in favor of ESI Fund Account no . Varanasi is attached herewith and shall remain in custody of the Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi (U.P.). 4. (A) I/we give the rights to Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi (U.P.). To forfeit the security money deposited by me/us if any delay occur on my /agent's part or fails to supply the article at the appointed place and time and of the desired specification (B) I/we undertake that I/we will be in position to provide annual maintenance contract and comprehensive maintenance contract (AMC and CMC), spare parts. And consumables for 5 years after completion of guarantee/warranty period. I /we also undertake to keep the equipment in running order throughout the years under warranty/ guarantee/ AMC/CMC and in case of equipment going out of order the fault will be attended within 24 hours of lodging the complaint. The firm shall ensure the machine is set rights within 7 days of intimation. However the tenderer have to arrange similar equipment as a standby at his cost and risk in case of breakdown of machine is not set in working condition. Failing which, a penalty of 0.25% of the total no cost of the equipment per day for the period equipment remains out of order be levied on me /us 5. There is no vigilance /CBI case pending against the firm /supplier. Our firm /company is also not blacklisted by Govt /Public /Pvt agency. 6. On inspection if any of the articles is not found as per supply order, it shall be replaced by me/us in time as asked for, to prevent any inconvenience at my/our own expenses. 7. I/we hereby undertake to supply the items as per specifications and directions given in supply order within the stipulated time period. 8. I/we undertake to provide guarantee /warranty as mentioned in specifications from the date of satisfactory installation and inspection. I also undertake that I will maintain the equipment during this period and replace the defected parts free of cost, if necessary. 9. The taxes quoted in price bid is as per Act/Law /Rule /Regulation applicable to the tendered equipment. 10. I/we understand that Medical Superintendent, ESIC Hospital, Pandeypur, Varanasi has the right to accept or reject any or all the tenders without assigning any reason (s) thereof. 11. The rate quoted in financial bid is unconditional and valid for six months from the date of opening of the bid. 12. This is to certify that my/our company /firm is authorized authorized _____________________ (manufacturers/dealers) of tendered equipment. (Authorization letter as per ANNEXURE - IV to be enclosed)

13. This is to certify that spare parts will be available for 5 years after the expiry of the warranty. 14. Name and address of the service center. 15. I/We had undertaken same type of work in past in government hospital.

NAME, SIGNATURE AND ADDRESS OF THE

TENDERER WITH RUBBER STAMP

Annexure VI

Satisfactory Performance Certificate

Certified that M/S has supplied the equipment which has been functioning satisfactorily at

department of this Hospital/Institution since .

It is also certified that after sales service provided by the manufacturer M/S have been satisfactory.

Note: This certificate should be on the letter head of the Hospital/Institution & should be signed by HOD/MS/CEO of the Hospital/Institution. The said certificate should also bear the signature of participating bidder as a witness.

Annexure-VII

Check list of compulsory scanned copy of documents to be uploaded (Check List) Sl. No.

Document Yes/No

1 EMD must be submitted in tender box before closing date and time (As per Sl.No.1 of Terms & Conditions)

2 Technical details of the quoted items with reference to tender specifications

3 Catalogue/literature containing make & model of the Equipment offered

4 Certificate stating Warranty/Guarantee period of equipment quoted is minimum 3 years.

5 Five years CMC charges as given in Sl.No.15 of T&C along with rates of spares, if any in the price bid.

6 Undertaking indicating that they have not supplied the said equipment to any individual, Govt. or private institution at the rate lower than the quoted rate

7 Manufacturer‟s Authorization Certificate (As per Annexure III) in case bid is submitted by agents

8 A certificate about Satisfactory performance report of the equipment & quality of after sales service duly authenticated from existing users of the equipment (As per Annexure-IV)

9 A signed undertaking on non judicial stamp paper of 100/- (One hundred only) along with tender (As per Annexure V) to be submitted along with EMD (also Hard copy in the tender box).

10 For the equipments where consumables/reusable etc. are Required, a list indicating cost of consumables/spares be given in the price bid.

11 Copy of GST/PAN/ TAN etc.

12 Compliance certificate to CE/FDA/BIS/ISO etc. attached as per requirement in tender specifications

13 Service Centre address.

14 Audited balance sheet of AY (2015-2016, 2016-2017,2017-2018)

15 Authority letter from the competent authority with respect to name, designation and specimen signature of the representative signing the tender document/authority letter.

Hard Copy of following documents to be submitted in the tender Box placed in Office of Medical Superintendent, ESIC Hospital, Pandeypur before date and time of opening the tender.

Sl.No. Document Yes/No 1. EMD 2. Undertaking as per Annexure-V

Note: 1. It should be ensured that all documents uploaded after scanning are legible, failing which the tender will be rejected.

2. Numbering of all pages uploaded should be

FOWLER COT Overall Size: Approx 2090 mm L x 920 mm W X 600 mm H (Without Mattress).(With out Castor). Overall Size Buffer to Buffer : Approx 2140 mm L x 970 mm W X 600mm H (Without Mattress). (With Castor). Bed Platform frame size : Approx 2070 mm L x 910 mm W. Mattress Platform size : 1970 mm L x 790 mm W. Buffer to Handle Length : 2275 mm. Fixed Height : 600 mm. Four section 1.2 mm (18 G) CRCA M.S perforated sheet top for easy breathing of mattress. Backrest section is welded with MS CRCA tube size 25.4 mm x 2.0 mm (14 G) and Leg section is welded with MS CRCA tube 25.4 mm x 1.6 mm ( 16 G ) for support. The size of perforated hole is having 21 mm diameter. Screw mechanism welded with ERW MS tube 31.75 mm x 1.2 mm (18 G) in M.S. cover made from dia 38.10 mm x 1.6 mm (16 G) ERW tube. Manual adjustments: Backrest, knee rest through two screw systems with thrust bearings individually manouvred by a single handle. Size of Back Rest: Over all - 785 mm L x 795 mm W. Only section : 720 mm L x 795 mm W. Size of Knee Rest: Over all - 470 mm L x 820 mm W. Only Section : 380 mm L x 795 mm W. Size of Leg Rest: Over all - 610 mm L x 795 mm W . Only Section : 610 mm L x 795 mm W. Size of Fix Section: Over all - 140 mm L x 780 mm W. Only Section : 610 mm L x 780 mm W. Raised Backrest Angle - 65⁰ Raised Kneerest Angle - 40⁰ Back rest - min 45 % of the frame length of 750 mm - O.K. Bed frame made from 60 mm x 30 mm x 1.6 mm (16 G) Thick ERW tube shall have proper support. This frame is fitted on H leg made from ERW tubes diameter 31.75 mm x 1.2 mm (18 G) thick and diameter 22.22 mm x 1.2 mm (18 G) thick and MS sheet having thickness 3.0 mm (11 G). The bottom end of the H legs are provided with PVC shoes in case of with out castors. The bed has head & foot panels detachable by hand without need of any tool. These head & foot panels are mounted in round bracket size 50 mm OD x 48 mm ID made from MS sheet having 2.0 mm (18 G) thick and welded with bed frame and used along with PVC sleeve. Four corner rubber buffers of 100 MM dia. for with castor application. There are four locations on the bed platform to hold stainless steel Telescopic Saline rod 12mm dia with 15.87 mm dia x 1.2 mm (18 G) stainless steel outer covering tube with a knob to mount syringe pump. Patient Working Load - 100 kg. Safe Working Load - 135 kg. Finishing & workmanship in the medical furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners and holes should be burr free.

M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Standard Accessories: Polymer Moulded Handle The bed has easily detachable moulded PP with PVC insert head and foot side panels H' Type Legs 910 mm W & 600 mm Height with 125 mm(5") dia High Grade Synthetic Body Castors, two with brake, two w/o brake (Imp). Telescopic I.V. Pole with 2 hooks . Urine Bag Holder. Moulded Chart Holder Provided with four section 4” thk PU Foam of 40 density covered PVC (0321).The Back Rest size is 760 mm L x 865 mm W x 100 mm T , Fix section size is 180 mm L x 865 mm W x 100 mm T , Knee Rest size is 416 mm L x 865 mm W x 100 mm T and Leg Rest size is 620 mm L x 865 mm W x 100 mm T M.S collapsible Railing . Rubber Bufer 5" Semi fowler Cot Overall Size Buffer to buffer: Approx 2050 mm L x 970 mm W (for With Castor) (Without Mattress). Overall Size Frame to Handle: Approx 2130 mm L x 920 mm W ( for With out Castor ) (Without Mattress). Bed Frame size : Approx 2005 mm L x 920 mm W. Mattress Platform size : 1885 mm L x 820 mm W. Fixed Height : 600 mm. Buffer to Handle length : 2180 mm. ( for With Castor ) Two section 1.2 mm (18 G) CRCA M.S perforated sheet top for easy breathing of mattress. Beckrest made from 1.2 mm (18 G) M.S CRCA perforated sheet welded with MS CRCA Tube 25 .4 mm x 2.0 mm (14 G) for support. The size of perforated hole is having 21 mm diameter. Manual adjustments: Backrest through one screw system with thrust bearings individually manouvred by a single handle. Screw mechanism welded with ERW MS tube 31.75 mm x 1.2 mm (18 G) in M.S. cover made from dia 38.10 mm x 1.6 mm (16 G) ERW tube. Size of Back Rest: Over all - 765 mm L x 790 mm W. Only Section : 720 mm L x 790 mm W. Size Body Rest: Over all - 1107 mm L x 815 mm W . Only Section : 1107 mm L x 815 mm W. Raised Backrest Angle - 65⁰ Back rest - min 45 % of the frame length of 770 mm. Bed frame made from 60 mm x 30 mm x 1.6 mm (16 G) Thick ERW tube shall have proper support. This frame is fitted on H leg made from ERW tubes diameter 31.75 mm x 1.2 mm (18 G) thick and diameter 22.22 mm x 1.2 mm (18 G) thick and MS sheet having thickness 3.0 mm (11 G). The bed has head & foot panels detachable by hand without need of any tool. These head & foot panels are mounted in round bracket size 50 mm OD x 48 mm ID made from MS sheet having 2.0 mm (18 G) thick and welded with bed frame and used along with PVC sleeve. Four corner rubber buffers of 100

MM dia. for with castor application.

There are four locations on the bed platform to hold stainless steel Telescopic Saline rod 12mm dia with 15.87 mm dia x 1.2 mm (18 G) stainless steel outer covering tube with a knob to mount syringe pump. Patient Working Load - 100 kg. Safe Working Load - 135 kg. Finishing & workmanship in the medical furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners and holes should be burr free. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns.

All Process Parameters as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Standard Accessories: Polymer Moulded Handle Fixed polymer moulded handle set of two The bed has easily detachable moulded PP with PVC insert head and foot side panels H' Type Legs 910 mm W & 600 mm Height with 125 mm(5") dia High Grade Synthetic Body Castors, two with brake, two w/o brake (Imp) Telescopic I.V. Pole with 2 hooks Urine Bag Holder . Moulded Chart Holder Provided with two section 4” thk PU Foam of 40 density covered PVC M.S collapsible Railing Rubber Bufer 5" Bedside Locker with S.S. Top Over all approx size: 410 mm x 410 mm x 820 mm H without buffer Over all approx size: 410 mm x 420 mm x 820 mm with Buffer. Body consisting of 2 sides and back are made from one piece made of 1.0 mm (20 G) CRCA MS sheet. Top made from 12 mm mdf shall be fitted with superimposed stainless steel ( SS 304 ) sheet having thickness 0.6 mm (24 G) with raised edges 13 mm height on three sides.

One drawer is provided below the top of size 100 mm H x 350 mm W x 390 mm D approx fitted with very smooth slides. Under the drawer is an open storage space and below it is a closed-door cabinet. The size of open storage is 390 mm L x 400 mm W x 190 mm H. The size of closed door cabinet is 390 mm L x 400 mm W x 360 mm H Drawer and cabinet are made of 1.0 mm (20 G) CRCA MS sheet.

Doors of the cabinet is made from MS sheet having thickness 1.00 and by press bend operation. Door is provided with ball lock. Door of the cabinet box is pivoted at top with Pin and bottom with Screw. Base of the Locker is fitted with twin wheel four swivel castors of 50 mm dia made from synthetic material without brake. Two buffers shall be provided at rear side of the locker box. Safe Working load is 30 Kgs. Finishing & workmanship in the furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003). Stainless Saline Stand With 4 Hook Adjustable height - 1395 mm to 2290 mm. Strong S.S 304 tubular diameter 31.75 mm x 1.2 mm (18 G) thick mounted on five pronged rectangular 20 mm X 40 mm X 1.6 mm (16 G) thick SS 304 tubular base.

Saline Stand fitted with five swivel rust proof synthetic body castor 50mm diameter w/o brake.

Saline Stand is provided with S.S 304 rod 12 mm diameter with four hook, one star Knob at top and plastic cap at bottom. Weighing bearing capacity 5 kgs per Hook All SS parts are 304 grade with buffed and matt finished. All Process Parameters as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Examination Couch Overall size: 1900 mm L x 945 mm W x 840 mm H With fitted BP tray. 1900 mm x 970 mm W With Step Stool x 840 mm H. 1900 mm L x 560 mm W x 840 mm H without BP Tray and step stool Fixed rexine upholstered top 64mm thick in two sections. Body frame work made from 0.9 mm (20 G) CRCA sheet and 20 mm x 40 mm x 1.6 mm (16 G) MS Rectangular Tubes. Mattress platform = 1900 mm L x 565 mm W x 65 mm H. Couch fitted with stainless steel Legs made from 2.0 mm (14 G) SS 304 sheet & powder coated. Headrest made from 1.2 mm (18 G ) CRCA sheet and supported with MS flats size 25 mm x 6 mm adjustable on gas spring. Rod for operating gas spring is made from MS having diameter 12.7 mm and having black bush at both ends made from LDP.

Couch fitted with stainless steel Legs made from 2.0 mm (14 G) SS 304 sheet with nylon bush at bottom of the leg & powder coated.

Upper section of box approx size 1220 mm L x 460 mm W x 630 mm H with three sliding drawers of approx size 320 mm L x 430 mm W x 75 mm H. Lower section comprises of three cabinets of approx inside size 350 mm L x 440 mm W x 430 mm H with separate doors & two with lock.

Sliding foot step under the front side of lower middle cabinet made from 0.9 mm (20 G ) MS CRCA Sheet. Size of Foot Step is 415 mm L x 330 mm W x 205 mm H above floor.

B.P. apparatus tray made of 1.2 mm (18 G) MS sheet of approx size 350 mm L x 120 mm W X 20 mm H provided on a swinging rod made from SS 304 having diameter 12 mm rotating through a bush fixed on the body of the couch on head side. Safe working load of 170 kgs and patient load bearing capacity of 135 kgs. Supplied in SKD condition. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003). Paper Roll Holder to be provided GYNAECOLOGY Examination Table Overall size: 1670 mm L (Including foldable leg section) x 720 mm W (Knob to Knob) x 555 mm to 920 mm H. Upholstered platform width - Approx 580 mm. Three section Fixed rexine upholstered top 65 mm thick. 3 section fixed& 1Perineal cut out filler 65 mm thick.

Size of mattresses : Back Rest Section : 865 mm L x 590 mm W x 65 mm H , Seat Section : 400 mm L x 590 mm W x 65 mm H , Leg Section with Perineal cut out : 360 mm L x 585 mm W x 65 mm H.

Backrest adjustable over a gas spring mechanism. Electromechanical motion control for height manuovered by single user friendly handset. Backrest raised angle - 65⁰ Paper roll holder (0175) - Under the back section , made from CRCA MS tube 25.4 mm x 1.2 mm (18 G). Comprises of Foldable leg section of length 360 mm 265 mm L x 585 mm W x 65 mm thick , (U cut = 585 mm W x 200 mm L x 65 mm H). Manually controlled pelvic tilt 170 Incorporated with a pair of rexine covered lithotomy crutches. Rod size 16 mm made from SS 304. Provided with hand PVC grips made from tube size 19.05 mm x 1.2 mm (18 G) and 22 mm x 1.2 mm (18 G) and slide on SS 304 rod size 16 mm at the Seat Section.

Safe working load 135 kgs and patient load bearing capacity of 125 kgs. Provision of Plastic Tray ( Plastic Pan) under the platform. Base frame size 1185 mm L x 595 mm W. Base frame is made from CRCA tube 60 mm x 30 mm x 1.6 mm (16 G) with supporting tube size 40 mm x 20 mm x 1.6 mm (16 G) , Square tube 40 mm x 40 mm x 3.2 mm (11 G) , Cover sheet CRCA 1.2 mm (18 G). Stump made from nylon is provided on the botton of base frame.

Leg section is made from CRCA Square tube 30 mm x 30 mm x 2.0 mm (14 G) , 25 mm x 25 mm 1.2 mm (18 G), MS flat size 25 mm x 6 mm thick and SS 304 sheets of 2.0 mm ( 14 G) and 1.0 mm (19 G).

Fixed pelvic section made from CRCA Square tube 30 mm x 30 mm x 2 mm (14 G) with supporting from CRCA MS sheet 3.0 mm (11 G) , Square bar 30 mm x 30 mm & Flat 32 mm x 6 mm.

Back section is made from MS CRCA sheet having 3.0 mm thick Safe working load 140 kgs and patient load bearing capacity of 135 kgs. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns.

All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Battery back up for un interrupted power feed. Electrical Specifications: Nominal 230 V AC Switch Mode Power Supply: Operating Rangefrom 90 V to 300 V with battery & 150Vac to 300Vac without battery 45/55 Hz, Max 2.A. Electrical Shock Protection : Class 1. Protection Voltage : 300V to 450V. Degree of Shock Protection : Type B. Power consumption ideal mode with battery : 10W. Power consumption at maximum load : 300W max. Liquid Ingress Protection : IP54. Rechargeable Batteries : 2 X 12 Volt Sealed Lead / Acid Gel. Duty Cycle : 10% (Two minutes for Every Eighteen minutes). STRETCHER ON TROLLEY Overall size: 2030 mm L x 570 mm W x 820 mm H. Mattress Plotform: 1810 mm L x 560 mm W. Frame work of Trolley is consists of vertical tube size diameter 31.75 mm x 1.2 mm (18 G) thick , with rainforced at bottom with diameter 34.92 mm x 1.2 mm (18 G) thick tube for fitting castors. The Frame work is mounted on 200 mm castors two with brakes and two without brakes.

All horizontal stays are made of tube diameter 25.4 mm X 1.2 mm (18 G). MS flat size 32 mm x 5 mm is welded to frame work to support stretcher.

Removable Stretcher Top made from MS tube diameter 25.4 mm x 2.0 mm (14 G) thick and diameter 15.8 mm x 1.2 mm (18 G) thick with epoxy coated aluminum top made from 1.2 mm (18 G) aluminum sheet. Handle is made of MS tube size diameter 25.4 mm x 2.0 mm (14 G) epoxy coated and covered with PVC black color sleeve. Three additional flat supports made from MS flat size 32 mm x 5 mm should be welded to support aluminum sheet top from underneath widthwise. Four stump legs made of 25.4 mm 2.0 mm (14 G ) ERW tube shall be welded at the bottom of the removable stretcher frame and should be provided with PVC material having nylon reinforced. Safe working load of 135 kgs and patient load bearing capacity of 130 kgs Supplied in SKD condition. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Standard Accessories: Safety belts Rexine covered Mattress 50 mm (2") thick with single section I.V. Rod with 2 Hooks Oxygen Cylinder Cage MS WEELCHAIR WITH CUSHIONED SEAT AND BACK Overall size: 1120 mm D x 670mm W x 920mm H. MS frame work of diameter 22 mm x 1.2 mm (18 G) except for the four widthwide stays of diamter 19.05 mm x 1.2 mm (18 G) MS tube. MS tubular frame works with fitted cushioned seat and back is mounted on two 200mm diameter Swivel Castor mounted on MS tube of diamter 28 mm x 2.6 mm (12 G). The castor is having semi round rubber hardness : 80 shore fitted over polyamide molded pulley. The wheel shall have two number ball bearings and 3/8 “ nut and bolt. The size of cushioned seat is 430 mm L x 418 mm W x 50 mm H (Thickness ) and size of cushioned back is 400 mm L x 390 mm W x 50 mm H ( Thickness) Cushion Seat and back is made for P.U. foam having 32 density. Thickness of Rexene : 0.6 mm. Seat section provided with 12 mm ply frame. Back seat (cushion) : No MS flat. Provided with wooden frame size fitted with wooden screw to ERW tube.

Two Adjustable aluminium footrest provided 75 mm above the floor. Arms : Two nos. inject molded from black polypropylene and fixed with bolts to the tubular arms. Two solid rubber tyre bicycle wheels diamter 635 mm with brakes and provided with S.S hoops made from Diameter 15.8 mm x 1.2 mm (18 G) tube for self propulsion. Two handle with proper hand grip made from black PVC provided. The the outer diameter of wheel rim made from MS is 600 mm. The diameter of the spoke made from MS is 2.6 mm. Total nos. of spoke used is 32. The spoke is fixed with wheel rim with the help of MS nut. The wheel rim and spokes are nickle - chrome plated.

All the SS parts should be of 304 grade material. Finishing &workmenship of high standard. All corners shall be rounded off so that there shall be no sharp edge. Patient bearing and Weighing bearing capacity 135 Kgs. Supplied in KDC condition. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Standard Accessories: Safety belts to be provided Over Bed Table – Overall size of top should be 810 mm L x 355mm W. Fitted with gas spring mechanism shall have latch pressing mechanism for lowering down the table top; the raising of the top shall be done by merely lifting it up without pressing the latch. The gas spring shall be housed in aluminum extruded telescopic sections having thickness of 2.0 mm for smooth sliding up and down from approx.: 815 mm to 1125 mm with Top. Two sections top shall be fixed on 19 mm Square ERW tube frame work. Fixed section is provided with rounded SS railing of 6mm dia rod on three sides. Size of Fixed section is 200 L mm x 340 mm W. Size of adjustable section is 610 mm L x 340 mm W Bigger section of the table top should be hinged & could be inclined to three raised position options.The raised position is achecived by three slot provided in MS flat size 70 mm x 3 mm and lever made from MS rod diameter 6 mm. The one end of the rod is covered with red color PVC sleeve. Front side of the bigger section of the top should be provided with raised PVC edge to prevent things from slipping off the top.

Base of the adjustable table should be made from 40 mm x 20 mm x 1.6 mm (16 G) rectangular tube welded to 40 mm x 75 mm x 5 mm thick channel connecting length 640mm and should be fitted with four castor wheel dia 50 mm made from anti rusting material , all without brake.

Small section is mounted on the telescopic stem with help of MS "U" shape external size 120 mm x 96 mm x 6 mm. welded with 19 mm square tube.

Weighing bearing capacity 20 Kgs. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns.

All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ). Crash Cart Overall Size: 960 mm L x 500 mm W X 1545 mm H. The crash cart should have 25.4 mm x 1.2 mm (18 G) Stainless steel tubular frame work. The emergency equipment cart should have the following facilities: 6 Nos. hand out bins to keep important supplies easily accessible of size approx 110 mm W x 125 mm D x 75 mm H.

Two lockable box units made of high impact polystyrene with 3 drawers should have dimension 305 mm L x 380 mm D x 320 mm H. The three drawers each to hold emergency medicines, ambu. bags, IV solutions, catheters, etc. separately and methodically in boxes of sizes approx - 85 mm W x 85 mm L x 50 mm H – 6 nos., - 85 mm W x 175 mm L x 50 mm H – 3 nos. and 85 mm W x 255 mm L x 50 mm H – 4 nos. Facility to carry monitors, ECG, suction apparatus on open areas at top centre and bottom shelves. Stainless steel saline rod made of 12 mm dia. 304 grade S.S. approx. 750 mm long and bent at top to have an arm of 400 mm approx. at the end of which of 6 mm dia. S.S. hook shall be welded with TIG process.

Crash cart with 125 mm dia non-rusting castor two with brakes and two without. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Provided with round rubber buffer, one on each corner. The size of middle and bottom shelf is 620 mm L x 388 mm W made from SS 304 0.9 mm (20 G) sheet. The shelf are provided with railing on three sides. This railing is made from SS 304 Rod of diameter 10 mm.

The size of top shelf is 670 mm L x 235 mm W made from SS 304 0.9 mm (20 G) sheet. Two side support size 237 mm W and 75 mm made from SS 304 2.0 mm (14 G) sheet provided to top shelf. Pullout cardiac massage board made of MDF of minimum size 670 mm x 330 mm x 12 mm laminated on top and bottom of laminate of 1 mm and 0.6 mm respectively. MDF shall have water resistance property and it should be made from eco friendly material. Oxygen cylinder cage epoxy powder coated, on one side. Handle for pushing the crash cart is made from SS 304 tube size 25.4 mm x 1.2 mm (18 G) and SS flat size 25 mm x 5 mm thick, provided on other side. Safe Working Load & Patient bearing capacity - 50 kg. Supplied in KDC condition. All stainless steel wherever used should be 304 grade. S.S parts finished with Matt Polish. M.S. tubular parts, linkages, flats aluminium base are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters to be as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems).

Mayo‟s Stand– Adjustable height of SS tray from approx 730 mm to 1300 mm. Tray size approx : 560 mm L x 400 mm W. SS tubular frame mainly made of 31.7 mm dia x 1.2 mm (18 G) round tube. Tray made from 0.9 mm (20 G) thick S.S. 304 grade sheet. - Tray frame made from SS fllat size 25 mm x 5 mm with a cantilever of 10 mm dia SS 304 grade rod and SQ. bar of 16mm S.S. 304. SS tubular frame mounted on four swivel, twin wheel non rusting castors of 50 mm wheel dia. All without brake. SS parts finished with Matt Polish. Supplied in SKD condition. Load bearing capacity : 5 Kgs All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). Dressing Trolley (S.S. Bowl & Bucket) Overall Size: 1010 mm L x 510 mm W x 920 mm H. Shelf Size: 750 mm L x 500 mm W. Verticals made of 31.75 mm OD x 1.2 mm (18 G) S S tube. Horizontal stays made of 19.05 mm OD x 1.2 mm (18 G) S S tube with S S tube 15.87 mm x 1.2 mm (18 G) on all four sides to support two stainless steel shelves 0.9 mm (20 G) over with 10 mm dia rod stainless steel railings shall be provided on all four sides. The height of railing is 3" (75 mm ).

Verticals mounted on 125 mm dia non –rusting castor two with brakes and two without brakes. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 0.9 mm (20 G) thickness, with protective railings on four sides. The railing shall be made from dia 10mm S.S.rod. The distance between the two shelves is 810 mm and distance from ground to bottom shelf is 330 mm. The trolley shall hold seamless stainless steel bucket with S.S. lid at lower level and S.S. bowl at top level respectively. The size of bucket is 230 mm H x 242 mm Outer diameter and size of bowl is 244 mm OD x 85 mm H. Both are made from SS 304 sheet 0.5 mm (25 G) Both removable bowl and bucket are mounted on the removable SS frame made from 10 mmdiamter rod. This SS frame is assembled on SS sleeve which is welded to vertical tube. Only 304 grade stainless steel should be used for tubular frame work & SS shelves of trolley. The trolley shall be in matt finish. SS parts finished with Matt Polish. Supplied in SKD condition. Load bearing capacity: 50 kgs ( Per Shelf - 25 Kgs).

All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems).

S.S. Instrument Trolley Overall size : Size: 1067 mm L x 609 mm W x 950 mm H. Verticals made of 25.4 mm OD x 1.2 mm (18 G) S S tube. Horizontal stays made of 19.05 mm OD x 1.2 mm (18 G) S S tube with S S tube 15.87 mm x 1.2 mm (18 G) on all four sides to support two stainless steel shelves made from 0.9 mm (20 G) SS 304 sheet with 10 mm dia rod stainless steel railings shall be provided on all three sides. The height of railing is 3" ( 75 mm).

Verticals mounted on 125mm dia non –rusting castor two with brakes and two without brakes. The distance between the two shelves is 810 mm and distance from ground to bottom shelf is 330 mm. Castor made from non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Two stainless steel shelves of 0.9 mm (20 G ) thickness, with protective railings on three sides. The railing shall be made from dia 10mm S.S.rod. SS 304 grade stainless steel used for trolley frame work with matt finish and burr free SS shelves. Supplied in SKD condition. Load bearing capacity : 50 kgs ( Per Shelf - 25 Kgs). All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems).

Oxygen Trolley

Suitable for 1320 liter gas cylinder. MS tubular framework made of approx 25.4 mm x 1.2 mm (18 G) MS. Round tube fitted with two rubber wheels 125 mm dia.

Trolley provided with locking provision made of 6mm x 25mm thick M.S. flats. Trolley fitted with SS 304 base of 2.0 mm (14 G) sheet & epoxy powder finish.

M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns All Process Parameters to be as per documented IMS Procedures for Quality Assurance .( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems).

Double Step Stool Overall Size: 600 mm L x 515 mm W x 450 H. First step height 230 mm & second step size 450 mm. Step made of 1.2 mm (18 G) MS CRCA sheet. Welded on MS tubular frame of 25.4 mm x 1.2 mm (18 G) fitted with aluminum tread flats of size: 500 mm L x 32 mm W x 3.4 mm thick fitted by aluminum pop rivet. Load bearing capacity : 135 Kgs. The legs fitted with high quality PVC shoes with nylon reinforcement. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns.

All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems).

Three Fold Screen with Curtain Cloth Overall Size: 1680mm H x 2450 mm W. The height of the penal is 1455 mm. Tubular frame work made from 19.05 mm dia x 1.2 mm (18 G) ERW tube and dia 15.8 mm x 1.2 mm (18 G) . Base tubular made from dia 25.4 mm x 1.2 mm (18 G) tube and dia 15.8 mm x 1.2 mm (18 G). The screen is supplied with six castors. Out these 6 castors , 4 castors are fitted on base made from round tube 25.4 mm x 1.2 mm (18 G) and 15.8 mm x 1.2 mm (18 G). One castor is fitted with each side panel. The castor diameter is 50 mm and type of castor is twin wheel swivel type dust free. Castors are fitted with MS nut and bolts to each penal tube and base tube.

Middle frame having width 1220 mm two side frames are having width 610 mm and each frame are having four hooks made from MS. Middle frame and side frames are assembled with joint made from MS tube size 31.75 mm x 1.2 mm (18 G). MS hooks are welded at top and bottom of all the three frames for spring made fro MS wire. Curtains are assembled on the spring. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ).

Labor table Over all Size Buffer to Buffer : 2160mm L when extended x 1010 mm W x 520 mm To 880 mm H (Without Mattress). Bed frame dimension : 2070 mm L x 910 mm W. Mattress Platform Dimension : 1805 mm L x 650 mm W. Three section high pressure laminated top having 8 mm thick with detachable facility of laminated top for middle section and leg section for ease of cleaning. Leg section can be telescoped under backrest for lithotomy position. Backrest, trendelenburg& reverse trendelenburg and height adjustment position operated by Electro mechanical adjustment thru hand set with battery backup and inbuilt battery charger shall be provided. The hand set shall have indications for power ON and the battery charge. Back rest Angle : 650 Trendelenburg Angle : 250 Reverse Trendelenburg Angle : 230 All electro mechanical actuators are compatible with class of IP 54. The bed shall have work simultaneously on two actuators system for raising and lowering height along with tilting. Bed frame made mainly from 60 mm x 30 mm x 1.6 mm (16 G) thick ERW tube with proper support. This frame shall be fitted on the base frame mainly made of 60 mm x 30 mm x 1.6 mm (16 G) ERW tubes on various supporting links. The base frame shall be mounted on 125 mm dia non-rusting castor wheels with central and directional locking mechanism and pedal operated at the head end of the bed. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. The bed shall have easily detachable polymer moulded head & foot side panels. Four corner rubber buffers have diameter 125 mm. Bed shall have swing down type railings. Railing shall be made from non-rusting polymer moulded material. These shall be fitted to the mattress support sections and should be able to raise and lock through spring lock mechanism through an operating lever. S.S. saline rod with 12 mm dia S.S. rod shall telescope in SS socket tube approx 15.8 mm dia x 1.2 mm (18 G) welded on angular base bracket of 2.0 mm (14 G) SS sheet. Nylon bracket provided to prevent colour damage It could be placed at two different locations. Patient‟s bearing down handgrips should be made of 22 mm dia x 1.2 mm (18 G) stainless steel tube fixed with PVC handle and should have location adjustability for patient‟s convenience. A pair of upholstery aluminum lithotomic crutches mounted on S.S. rods having size 16 mm. Waste collecting removable stainless steel tray shall be provided at perennial recess. The backrest and middle section shall have 75 mm thickness foam mattress P.U. 40 D. with rexine cover and zip. The leg section shall have 130 mm thickness for propose alignment with other adjacent sections. The PU foam shall have high resilience and radiolucent property. SS parts are of 304 grade with Matt Polish. Safe Working Load - 150 kg and Patient Weight capacity - 135 Kgs. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns

All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). Electrical Specifications: Nominal 230 V AC. Switch Mode Power Supply: Operating Range from 90 V to 300 V with battery & 150Vac to 300Vac without battery 45/55 Hz, Max 2.A. Electrical Shock Protection : Class 1. Protection Voltage : 300V to 450V. Degree of Shock Protection : Type B. Power consumption ideal mode with battery : 10W. Power consumption at maximum load : 300W max. Liquid Ingress Protection : IP54. Rechargeable Batteries : 2 X 12 Volt Sealed Lead / Acid Gel. Duty Cycle : 10% (Two minutes for Every Eighteen minutes). Standard Accessories : PU Foam Mattress for Birthing Bed Pink Colour. Foot Rest L Type : Made from tube size SS 304 25.4 m x 1.2 mm (18 G) and 31.75 mm x 1.2 mm (18 G) with Grip PVC handle black. Foot Rest LH &RH : Made from tube size SS 304 25.4 m x 1.2 mm (18 G) and 31.75 mm x 1.2 mm (18 G) with Grip PVC handle black. Lithotomy crutches mounted on SS rods 1 pair Telescopic IV Pole(2 hooks) Instrument Cabinet

Size: 1600 H x 635 L x 430 D mm. Mainly made of CRC sheet with three sides closed. Consisting of adjustable five glass shelves One mild steel door with glass. Door consisting of lock and key Finish in epoxy powder coated

Wash Basin Stand Single Tier Height 850 mm suitable for 375 mm SS bowl. M.S. tubular frame of dia 25.4 x 1.2 mm (18 G) tube work mounted on three 50 mm dia. Non rusting castor all without brake. MS tubular frame is supported at middle and bottom with triangular frame made from MS tube size 19.05 mm x 1.2 mm (18 G) - O.K.

The size of SS 304 bowl is 384 mm OD x 103 mm H made from SS 304 sheet size 0.8 mm (21 G) SS parts finished with Matt polish. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns

All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). Medicine trolley Overall Size: 1030 mm L x 595 mm W. Platform Dimension (Top Polymer Molded Panel) -: 560 mm L X 370 mm W. Height (Floor To Top Polymer Molded Panel) : 950 mm. Maximum height (Floor to eye level detachable fully S.S top shelf) : 1610 mm. Four Drawers with centralized locking. Upper Drawer ABS tray : 560 mm L X 340 mm W X 65 mm H. Middle Drawer ABS tray 2 nos : 560 mm L X 340 mm W X 145 mm H. Cardiac Massage Board : 710 mm X 390 mm X 6 mm thick. Lower Drawer ABS tray : 550 mmx 330 mm x 230 mm. Poly Carbonate Partition plates for top and second drawer. Integrated with Chart / File holder, 2 nos of Catheter Holder, 1 no of Trash bin. cart mounted on twin wheel 125 mm dia non-rusting castor two with brakes and two without. Castor made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Base structure provided with rubber buffer, one on either sides. Frame work is made from tube size : 25.4 mm x 1.2 mm (18 G). Pull out cardiac massage board made of MDF of minimum size 710 mm x 390 mm x 6 mm laminated on top and bottom of laminate of 1 mm and 0.6 mm respectively. MDF shall have water resistance property and it should be made from eco friendly material. Safe Working Load & Patient bearing capacity - 50 kg. Oxygen cylinder stand epoxy powder coated, on one side. All stainless steel wherever used should be 304 grade. S.S parts finished with Matt Polish. M.S. tubular parts, linkages, flats aluminium base are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). Standard Accessories : Cardiac Massage Board : 710 mm X 390 mm X 6 mm thick. Poly Carbonate Partition plates Scissor Holder

PAEDIATRIC BED Overall Size Buffer to Buffer : Approx 1500 mm L x 820 mm W (Without Mattress). Bed Platform frame size : Approx 1450 mm L x 775 mm W. Mattress Platform size : 1340 mm L x 655 mm W. Buffer To Handle Length : 1680 mm. Fixed Height : 600 mm. Two section 1.2 mm (18 G) CRCA M.S perforated sheet top for easy breathing of mattress. Fixed Bodyrest made from 1.2 mm (18 G) M.S CRCA perforated sheet. Manual adjustments : Backrest and trendelenberg / Reverse trendelenburg through two screw systems with thrust bearings individually manouvred by a single handle. Raised Backrest Angle – 70 degree Trendelenburg – 10 degree Reverse Trendelenburg – 10 degree Four corner rubber buffers of 100 MM dia. Bed frame made from 60 mm x 30 mm x 1.6 mm (16 G) thick ERW tube shall have proper support. This frame is fitted on the base frame mainly made of 60 mm x 30 mm x 1.6 mm (16 G) ERW tubes on various supporting links. The base frame is mounted on 125 mm dia non-rusting high grade Synthetic castor wheels two with brakes and two without brake. Castor wheels made from high grade non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Four locations on the bed platform to hold stainless steel Telescopic Saline rod 12 mm dia with 15.87 mm dia x 1.2 mm (18 G) stainless steel outer covering tube with a knob to mount syringe pump. Safe Working Load - 110 kg & Patient bearing load capacity 90 Kg. Finishing & workmanship in the medical furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners and holes should be burr free. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns All Process Parameters to be as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). Standard Accessories: S.S. Tubular ,Telescopic, Collapsible Side Rails Telescopic I.V. Pole with 2 hooks - Cartoon S.S. Laminated Head & Foot Board Polymer Moulded Handle

Two section Mattress with 1345 mm L x 705 mm W x 100 mm Thk. (4") PU Foam of 40 Density Covered with PVC Rexine.

Urine Bag Holder - Oxygen cage cylinder cage With Epoxy powder coated

Revolving Stool Height adjustable from Approx 540 mm L to 755 mm with accurately machine screw mechanism.. Tubular tripod base of 25.4 x 1.6 mm (16 G) ERW tube and centre tube made 38.05 mm x 1.6 mm (16 G ) thick and revolving SS top made from 0.7 mm (22 G) S S sheet and platform diameter 304 mm. Legs fitted with PVC shoes. All SS parts are of 304 grade with Matt finish. Load bearing capacity 135 Kgs All Process Parameters to be as per documented IMS Procedures for Quality Assurance (ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). Surgeon Chair

1. The chair should be revolving with backrest withought armrest. 2. The chair height should be pneumatically adjustable . 3. The chair should have sturdy base with wheels 4. The chair should have ergonomic seat of good quality foam. 5. Approx weight 9-12kgs

Soiled Linen Trolley Overall size : 960 mm H x 510 mm dia SS tubular framework made of 25.4 mm x 1.2 mm (18 G) SS 304 fitted with three 125 mm dia non-rusting castor wheels all without brake. Upper ring is made of 19 mm dia x 1.2 mm (18 G) tube and support stays is made of 19 mm dia. x 1.2 mm (18 G) stainless steel 304 tubes. Castor made from non floor-staining synthetic materials with integrated thread guards. Wheel centre having precision ball bearing to run smoothly. Safe Working Load & Patient bearing capacity - 20 kg. Supplied with canvas bag. Supplied in SKD condition. All Process Parameters to be as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 Quality Management Systems). Patient shifting trolley Overall size: 1905 mm L x 710 mm W x 660 mm Min. H. and 910 mm Max. H. Mattress Plotform: 1785 mm L x 555 mm W. Stretcher Dimension Appox. : 1830 mm L x 555 mm W. Height adjusted by foot operated high quality hydraulic pump. The pump shaft actuation stroke length is 140 mm with push force 10KN at 270 bars. No of stroke required to acheive maximum height is 25 nos.

Trendelenberg & Reverse Trendelenberg assisted by two gas spring for easy, smooth and jerk free action. Trendelenberg - 190 Reverse Trendelenberg - 60 Removable Two section stretcher supported on MS tubular frame size 25.4 mm x 2 mm (14 G). Top is made from decorative laminated (compact) sheet of 8 mm thick. Backrest is raised by ratchet mechanism having five different position as 250, 350 , 450 , 550& 650 Ratchet mechanism is consists of SS 304 rod having diameter 12 mm and flat size 275 mm x 6 mm. X ray casstte holder in MS "L" channel size 25 mm x 25 mm x 2.0 mm (14 G) with aluminium channel 22 mm x 14 mm x 2.6 mm thick Synthetic rubber cover on pushing handles having rod size 12 mm attached to MS frame made from 60 mm x 30 mm x 1.2 mm (18 G). Four corner rubber buffers of 135mm diameter.

MS tray having size : 310 mm x 260 mm made from 1.2 mm (18 G) CRCA sheet.

Mild steel tubular frame work made of 60 mm x 30 mm x 1.2 mm (18 G) supported by MS tube 25 mm x 25 mm x 1.2 mm (18 G) 25.4 mm x 1.2 mm (18 G) and linkages made from flats thickness 10 mm. This frame is mounted on four 125 mm dia. castor with synthetic body two with brakes and two without brakes.

Swing away type Railing suitable for Stretcher on Trolley (pair) with S.S. tubular frame. The size of Railing 1180 mm L x 350 mm H made from SS tube diameter 19 mm 1.2 mm (18 G) & 15.8 mm x 1.2 mm (18 G) and MS bracket made from MS Flat 6.0 mm thick. The railing height (Effective Height) above stretcher top & without mattress is 240 mm.

Safe working load of 165 kgs and patient load bearing capacity of 135 kgs. Supplied in Semi SKD condition. Supplied with M.S storage tray. M.S. tubular parts, linkages, flats are to be In-house, pretreated / shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. All Process Parameters as per documented IMS Procedures for Quality Assurance ( ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007 & ISO 13485:2003 ).

Standard Accessories: Swing away type Railing suitable for Stretcher on Trolley (pair) with S.S. tubular frame. Telescopic I.V. Rod with 2 Hooks provision at four locations. Oxygen Cylinder Cage With Epoxy powder coated M.S. Storage Tray. Safety belts Rexine Covered 50mm thick Mattress made from PU foam having 40 density with Two sections

Suction Machine

1. The suction machine should have an oil free twin headed piston pump. 2. The capacity should be 720 mmHg at 32-35 LPM. 3. The machine should be made of M.S. powder coated with anti corrosive chemical treatment.

The machine should be mounted on a stand and Ms trolley with 4 castors (two with break) so that the user does not have to bend to operate or regulate the machine for operation.

4. The machine should be provide with two polycarbonate autoclavable jar of 2x2.0 ltr capacity which are easily detachable. An overflow protection should be provided mechanical type.

5. Motor should be thermally protected having the range 0-760 mmHg 6. Noise level 50 db 7. Power consumption 220230V AC 50HZ,130W 8. Collapsible silicone suction tube 9. The machine should be CE ,ISO 13485 and GMP approved

X-Ray View Box :

Technical Specification 1. Slim, Durable and Effective 2. Energy Efficient: Saving range more than 82% 3. No UV emission 4. Unparalleled latest LED backlight technology 5. Power efficient, LED light with long life up to 100,000 hours 6. Reliable magnetic nipper 7. Initial brightness can be set 8. Film activated switch, automatic shutdown if no film inside for 2 to 10 sec 9. 8 to 12 step digital dimmer with display to get the perfect brightness. Parameter Single Screen

Two Screen

Dimension (mm) Frame(LxHxT) 500±100 x 500±100 x 30±10mm

900±100 x 500±100 x 30±10mm

Viewing Area(WxH)

400±100 x 500±100

750±100 x 450±100

Power Consumption 10-20 W AC 100-240V, 50/60Hz

30-40 W AC 100-240V, 50/60Hz

Power Supply Input LED LED Brightness (LUX) >10,000 >10,000