ras - carrier › hvac › docs › 1011 › public › 0c › 5132… · fully insulated cabinet...
TRANSCRIPT
513 21 3211 00 3/30/15
ELECTRIC COOLING, R−410A SINGLE PACKAGE ROOFTOP 3 − 15 TONS (1 & 3−Phase)BUILT TO LAST, EASY TO INSTALL AND SERVICE
ASHRAE 90.1 energy compliant efficiency levels Singlestage cooling capacity control on all 036072 models and the
091,101 and 121 models Twostage cooling capacity control on 090,102,120,150 and 180
models Rated in accordance with ARI Standard 210/240 (036060 sizes)
and 340/360 (072180 sizes) SEER’s up to 13.0, EER’s up to 11.3 IEER’s up to 12.2 with single speed indoor fan motor IEER’s up to 13.0 with 2speed/VFD indoor fan motor
Designed in accordance with Underwriters’ Laboratories Standard1995
Listed by UL and UL, Canada or ETL and ETL, Canada Exclusive noncorrosive composite condensate pan in accordance
with ASHRAE 62 Standard,sloping design; side or center drain
Prepainted exterior panels and primercoated interior panels testedto 500 hours salt spray protection
Fixed refrigerant metering system Fully insulated cabinet Cooling operating range from 40 F up to 115 F Access panels with easy grip handles and nostrip screw feature Twoinch disposable return air filters Toolless filter access door Standard belt drive, constant torque motor Advanced terminal board for simple safety circuit troubleshooting
and control box arrangement Field Convertible from vertical to horizontal airflow configuration on
all models.No special kit required on 036150 models. Field accessory supplyduct kit required for 180 size models only.
Provisions for thruthebottom power entry capability Single point electric connections Full perimeter base rail with builtin rigging adapters and fork truck
slots Scroll compressors with internal linebreak overload protection
Copper tube, aluminum fin coils
24volt control circuit protected with resettable circuit breaker Permanently lubricated evaporatorfan motor Permanently lubricated, totally enclosed condenserfan motors Low pressure, freeze protection, and highpressure switches Liquid line filter drier standardFACTORY OPTIONS INCLUDING BUT NOT LIMITED TO:
Economizer and two position damper options Disconnect and convenience outlet options Multiple optional motor and pulley combinations Corrosion resistant options for evaporator and condenser coils 2 speed indoor fan motor on 2 stage cooling models Integrated economizer system. Standard and Ultra Low Leak
versions available
WARRANTY 5 Year limited warranty on compressor 5 Year limited warranty on electric heater parts 1 Year limited warranty on parts
RAS090−121
RAS036−072
Use of the AHRI Certified TM Mark in-dicates a manufacturer’s participationin the program. For verification of certi-fication for individual products, go towww.ahridirectory.org .
UNIT PERFORMANCE DATA − Single Stage Cooling
UNIT
COOLING
Unit DimensionsH x W x L
UnitWeightlb. [kg]
Nom.Tons
Net Cap.(Btuh) SEER EER
TotalPower(kW)
RAS036*0AA0AAA 3 34,600 13.0 11.0 3.1 33−3/8” x 46−3/4” x 74−3/8” (847 x 1187 x 1888) 438 [199]RAS048*0AA0AAA 4 45,000 13.0 11.0 4.0 33−3/8” x 46−3/4” x 74−3/8” (847 x 1187 x 1888) 494 [224]RAS060*0AA0AAA 5 59,000 13.0 10.8 5.5 33−3/8” x 46−3/4” x 74−3/8” (847 x 1187 x 1888) 524 [238]RAS072*0AA0AAA 6 70,000 N/A 11.2 6.4 41−3/8” x 46−3/4“ x 74−3/8” (1051 x 1187 x 1888) 607 [275]RAS091*0AA0AAA 7−1/2 88,000 N/A 11.2 8.0 41−3/8” x 59−1/2“ x 88−1/8” (1051 x 1510 x 2238) 705 [320]RAS101*0AA0AAA 8−1/2 97,000 N/A 11.2 8.8 49−3/8” x 59−1/2“ x 88−1/8” (1253 x 1510 x 2238) 845 [384]RAS121*0AA0AAA 10 117,000 N/A 11.2 10.6 49−3/8” x 59−1/2“ x 88−1/8” (1253 x 1510 x 2238) 855 [388]UNIT PERFORMANCE DATA − Dual Stage Cooling
UNIT
COOLING
Unit DimensionsH x W x L
UnitWeightlb. [kg]
Nom.Tons
Net Cap.(Btuh) SEER EER
TotalPower(kW)
RAS090*0AA0AAA 7−1/2 83,000 N/A 11.2 7.4 41−3/8” x 59−1/2“ x 88−1/8” (1051 x 1510 x 2238) 760 [345]RAS102*0AA0AAA 8−1/2 97,000 N/A 11.2 9.0 49−3/8” x 59−1/2“ x 88−1/8” (1253 x 1510 x 2238) 855 [388]RAS120*0AA0AAA 10 114,000 N/A 11.3 10.1 49−3/8” x 59−1/2“ x 88−1/8” (1253 x 1510 x 2238) 865 [393]RAS150*0AA0AAA 12−1/2 140,000 N/A 11.0 12.7 49−3/8” x 59−1/2“ x 88−1/8” (1253 x 1510 x 2238) 1075 [489]RAS180*0AA0AAA 15 174,000 N/A 11.0 15.8 57−3/8” x 63−3/8“ x 115−7/8” (1456 x 1609 x 2942) 1305 [593]
* Indicates Unit voltage: K = 208/230−1−60, H = 208/230−3−60, L = 460−3−60, S = 575−3−60NOTE: BASE MODEL NUMBERS LISTED. SEE MODEL NOMENCLATURE LISTING FOR ADDITIONAL OPTIONS
RASProduct Specifications
Specifications subject to change without notice.2 513 21 3607 00
MODEL NOMENCLATURE (With Single Speed IFM)MODEL SERIES R A S 0 9 1 H 0 A A 0 A A APosition Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14R = Rooftop
A = Air Conditioning (Cooling Only)
H = Heat Pump
G = Gas/Electric Type
S = Standard ASHRAE 90.1−2010 Efficiency Efficiency
036 = 3 Tons
048 = 4 Tons
060 = 5 Tons 090 = 7.5 Tons (Dual Compressor)072 = 6 Tons 102= 8.5 Tons (Dual Compressor)091 = 7.5 Tons (Single Compressor) 120 = 10 Tons (Dual Compressor)
101 = 8.5 Tons (Single Compressor) 150 = 12.5 Tons (Dual Compressor)
121 = 10 Tons (Single Compressor) 180 =15 Tons (Dual Compressor)
Nominal Cooling Capacity
K = 208/230−1−60
H = 208/230−3−60
L = 460−3−60
S = 575−3−60 Voltage
0 = No Heat
Heating CapacityA = Standard Motor (3 to 15 Ton− 1 speed, 7.5 to 15 ton− 2 speed)
B = High Static Motor (3−12.5 ton, 1 Speed, 3 phase models only, 7.5 to 15 ton, 2 speed)
C = Medium Static Motor (3 to 15 Ton)
E = High Static Motor , High Efficiency Motor (15 ton only)
G = High Static Motor with Hot Gas Reheat (15 ton only)
H = High Static Motor with Hot Gas Re−Heat (3 to 12.5 ton, single speed motors), (7.5 to 15 ton, 2−speed motors)
Motor Option (Indoor Fan)
A = None
B = Economizer w/Bara−relief, OA Temp sensorE = Economizer w/Bara−relief + CO2 Sensor, OA Temp sensorH = Economizer w/Bara−relief, enthalpy sensorL = Economizer w/Bara−relief + CO2 Sensor, enthalpy sensorU = Temp Ultra Low Leak Economizer w/Bara−relief
W = Enthalpy Ultra Low Leak Economizer w/Bara−relief
P = 2−Position damper Outdoor Air Options / Control 1
0A = No Options
AT = Non−powered 115v C.O.
4B = Non−Fused Disconnect
BR = Supply Air Smoke Detector
AA = Easy Access Hinged Panels Factory Installed Options
A = Aluminum / Copper Cond & Evap Coil
B = Precoat Alum/Copper Cond with Alum / Copper Evap (3 phase only)
C = E−Coated Alum/Copper Cond with Alum / Copper Evap (3 phase only)
D = E−Coated Alum / Copper Cond & Evap (3 phase only)
E = Copper/Copper Cond & Alum/Copper Evap (3 phase only)
F = Copper/Copper Cond & Evap (3 phase only) Condenser / Evaporator Coil Configuration
A = Standard Single Speed Indoor Fan Motor. For W7212 controlsB = Standard Single Speed Indoor Fan Motor. For W7220 controlsT = 2 Speed Indoor Motor VFD Controller (For 2−stage units only) Motor Type OptionNOTE: Factory installed options are NOT available on single phase models. This includes economizers and 2 position dampers.1 A combinations of FIOPS are available.
Specifications subject to change without notice. 3513 21 3607 00
Table 1 – FACTORY−INSTALLED OPTIONS AND FIELD−INSTALLED ACCESSORIES
CATEGORY ITEMFACTORY
INSTALLED OPTIONFIELD INSTALLED
ACCESSORY
Cabinet
Supply Duct Cover (180 size only) XThru−the−base electrical connections XHinged Access Panels X
Coil Options
Cu/Cu indoor and/or outdoor coils1, 6 XPre−coated outdoor coils1, 6 XPremium, E−coated outdoor coils1, 6 X
Humidity Control Hot Gas Re−Heat Dehumidification System6 XCondenser Protection Condenser coil hail guard (louvered design)6 X X
Controls
Thermostats, temperature sensors, and subbases XSmoke detector (supply and/or return air) XTime Guard II compressor delay control circuit XPhase Monitor X
Economizers& Outdoor Air
Dampers
EconoMi$er IV (for electro−mechanical controlled − Non FDD (Stan-dard air leak damper models)6,7 X X
EconoMi$er2 for DDC controls, complies with FDD (Standard andUltra Low Leak air damper models)6,8 X X
Motorized 2 position outdoor−air damper6 X XManual outdoor−air damper (25% and 50%) XBarometric relief2 X XPower exhaust XEconoMi$er X for electro−mechanical controls, complies with FDD(Standard and Ultra Low Leak air damper models)6,7 X X
Economizer Sensors&
IAQ Devices
Single dry bulb temperature sensors3 X XDifferential dry bulb temperature sensors3 XSingle enthalpy sensors3 X XDifferential enthalpy sensors3 XCO2 sensor (wall, duct, or unit mounted)3 X X
Electric HeatElectric Resistance Heaters XSingle Point Kit X
Indoor Motor& Drive
Multiple motor and drive packages X
2−Speed Indoor Fan Motor system w/VFD controller (2−stage coolonly with electrical mechanical controls) X
Display Kit for 2−Speed Indoor Fan Motor system with VFD X
Low AmbientControl
Winter start kit4 XMotormaster head pressure controller4 X
PowerOptions
Convenience outlet (unpowered) XNon−fused disconnect5 XDisconnect Switch Bracket (16 size only) X
Roof CurbsRoof curb 14−in (356mm) XRoof curb 24−in (610mm) X
NOTES: 1. Included with economizer.2. Sensors for optimizing economizer.3. See application data for assistance.4. Available on units with MOCP’s of 80 amps or less.5. Not available as factory installed option on single phase (208/230/1/60) models. Use field−installed accessory where available.6. FDD −(Fault Detection and Diagnostic) capability per California Title 24 section 120.2
Specifications subject to change without notice.4 513 21 3607 00
FACTORY OPTIONS AND/OR ACCESSORIESEconomizer (dry−bulb or enthalpy)Economizers save energy, money and improvecomfort levels in the conditioned space. They bring infresh, outside air for ventilation; and provide cooloutside air to cool your building. This also is thepreferred method of low ambient cooling. Whenintegrated with CO2 sensors, economizers canprovide even more savings by coupling the ventilationair to only that amount required based on spaceoccupancy. Economizers are available, installed andtested by the factory, with either enthalpy ortemperature dry−bulb inputs. There are also modelsfor electromechanical, direct digital controllers andsingle speed fan or 2−speed indoor fan motors.Additional sensors are available as accessories tooptimize the economizer. Economizers include gravitycontrolled barometric relief that helps equalize buildingpressure and ambient air pressures. This can be acost effective solution to prevent buildingpressurization. Economizers are available in UltraLow Leak and standard low leak versions.
CO2 SensorImproves productivity and saves money by workingwith the economizer to intake only the correct amountof outside air for ventilation. As occupants fill yourbuilding, the CO2 sensor detects their presencethrough increasing CO2 levels, and opens theeconomizer appropriately.When the occupants leave, the CO2 levels decrease,and the sensor appropriately closes the economizer.This intelligent control of the ventilation air, calledDemand Control Ventilation (DCV) reduces the overallload on the rooftop, saving money.Smoke DetectorsTrust the experts. Smoke detectors make yourapplication safer and your job easier. ICP smokedetectors immediately shut down the rooftop unit whensmoke is detected. They are available, installed by thefactory, for supply air, return air, or both.
Louvered Hail GuardsSleek, louvered panels protect the condenser coil fromhail damage, foreign objects, and incidental contact.Convenience Outlet (un−powered)Reduce service and/or installation costs by including aconvenience outlet in your specification. ICP will installthis service feature at our factory. Provides aconvenient, 15 amp, 115v GFCI receptacle with “Wetin Use” cover. The “unpowered” option is to bepowered from a separate 115/120v power source.
Non−fused DisconnectThis OSHA−compliant, factory−installed, safety switchallows a service technician to locally secure power tothe rooftop.
Disconnect Switch BracketProvides a pre−engineered and sized mountingbracket for applications requiring a unit mounted fusedand non−fused disconnect of greater than 100 amps.Bracket assures that no damage will occur to coils
when mounting with screws and other fasteners (180size only).Power Exhaust with Barometric ReliefSuperior internal building pressure control. Thisfield−installed accessory may eliminate the need forcostly, external pressure control fans.Time Guard II Control CircuitThis accessory protects your compressor bypreventing short−cycling in the event of some otherfailure, prevents the compressor from restarting for 30seconds after stopping. Not required with authorizedcommercial thermostats.Filter or Fan Status SwitchesUse these differential pressure switches to detect afilter clog or indoor fan motor failure. When used inconjunction with a compatible unitcontroller/thermostat, the switches will activate analarm to warn the appropriate personnel.
Motorized 2−Position DamperThe new ICP 2−position, motorized outdoor airdamper admits up to 100% outside air. Using reliable,gear−driven technology, the 2−position damper opensto allow ventilation air and closes when the rooftopstops, stopping unwanted infiltration. Not availablewith 2−speed indoor fan motor models.Manual OA DamperManual outdoor air dampers are an economical way tobring in ventilation air. The dampers are available in25% and 50% versions. Not available with 2−speedindoor fan motor models.Optional Hot Gas Re−HeatDehumidification SystemICP’s Hot Gas Re−Heat dehumidification system is anall−inclusive factory−installed option that can beordered with any RAS180 rooftop unit.This system expands the envelope of operation ofICP’s rooftop products to provide unprecedentedflexibility to meet year−round comfort conditions.The Hot Gas Re−Heat dehumidification system hasthe industry’s only dual dehumidification mode setting.The Hot Gas Re−Heat system includes two newmodes of operation.The RAS180 rooftop coupled with the Hot GasRe−Heat system is capable of operating in normaldesign cooling mode, subcooling mode, and hot gasreheat mode. Normal design cooling mode is when theunit will operate under its normal sequence ofoperation by cycling compressors to maintain comfortconditions.Subcooling mode will operate to satisfy part load typeconditions when the space requires combined sensibleand a higher proportion of latent load control. Hot GasReheat mode will operate when outdoor temperaturesdiminish and the need for latent capacity is requiredfor sole humidity control. Hot Gas Reheat mode willprovide neutral air for maximum dehumidificationoperation.
Specifications subject to change without notice. 5513 21 3607 00
FACTORY OPTIONS AND/OR ACCESSORIES (cont.)2−Speed Indoor Fan Motor Indoor FanSpeed SystemICP’s 2−speed indoor fan motor system saves energyand installation time by utilizing a Variable FrequencyDrive (VFD) to automatically adjust the indoor fanmotor speed in sequence with the units coolingoperation. Per ASHRAE 90.1 standard section6.4.3.10.b, during the first stage of cooling operationthe VFD will adjust the fan motor to provide 2/3rd ofthe total cfm established for the unit. When a call forthe second stage of cooling is required, the VFD willallow the total cfm for the unit established (100%).During the heating mode the VFD will allow totaldesign cfm (100%) operation and during the ventilationmode the VFD will allow operation to 2/3rd of totalcfm.Compared to single speed indoor fan motor systems,ICP’s 2−speed indoor fan motor system can savesubstantial energy, 25%+, versus single speed indoorfan motor systems.The VFD used in ICP’s 2−speed indoor fan motorsystem has soft start capabilities to slowly ramp up thespeeds, thus eliminating any high inrush air volumeduring initial start−up. It also has internal over−currentprotection for the fan motor and a field installed displaykit that allows adjustment and in depth diagnostics ofthe VFD.
This 2−speed indoor fan motor system is available onmodels with 2−stage cooling operation withelectromechanical Multi Protocol controls. Both spacesensor and conventional thermostats/controls can beused to provide accurate control in any application.
The 2−speed indoor fan motor system is very flexiblefor initial fan performance set up and adjustment. Thestandard factory shipped VFD is pre−programmed toautomatically stage the fan speed between the firstand second stage of cooling. The unit fan performancestatic pressure and cfm can be easily adjusted usingthe traditional means of pulley adjustments. The othermeans to adjust the unit static and cfm performance isto utilize the field installed Display Kit and adjust thefrequency and voltage in the VFD to performancerequirements. In either case, once set up, the VFD willautomatically adjust the speed between the coolingstage operations.
Motormaster Head Pressure ControllerThe Motormaster motor controller is a low ambient,head pressure controller kit that is designed tomaintain the unit’s condenser head pressure duringperiods of low ambient cooling operation. This deviceshould be used as an alternative to economizer freecooling when economizer usage is either notappropriate or desired. The Motormaster will eithercycle the outdoor fan motors or operate them atreduced speed to maintain the unit operation,depending on the model.
Hinged Access Panels
Allows access to unit’s major components withspecifically designed hinged access panels. Panelsare: filters, control box, fan motor and compressor.
Winter Start Kit
The winter start kit by ICP extends the low ambientlimit of your rooftop to 25�F (−4�C). The kit bypassesthe low pressure switch, preventing nuisance trippingof the low pressure switch. Other low ambientprecautions may still be prudent.
Alternate Motors and Drives
Some applications need larger horsepower motors,some need more airflow, and some need both.Regardless of the case, your ICP expert has a factoryinstalled combination to meet your application. A wideselection of motors and pulleys (drives) are available,factory installed, to handle nearly any application.
Thru−the−Base Connections
Thru−the−base connections, available as either anaccessory or as a factory option, are necessary toensure proper connection and seal when routing wireand piping through the rooftop’s basepan and curb.These couplings eliminate roof penetration and shouldbe considered for gas lines, main power lines, as wellas control power.
Electric Heaters
ICP offers a full−line of field−installed accessoryheaters. The heaters are very easy to use, install andare all pre−engineered and certified.
Supply Duct Cover
This supply duct cover is required when fieldconverting the factory standard vertical duct supply tohorizontal duct supply configuration. One required perunit (180 size only).
Specifications subject to change without notice.6 513 21 3607 00
ACCESSORIES − RAS036−180ECONOMIZERS
ECONOMI$ER IV FOR 1SPEED INDOOR FAN MOTOR ONLY)STANDARD LEAK CONTROLLER INCLUDED
VERTICAL
Model Number Description Use With ModelSize
CRECOMZR020A02
STANDARD LEAK Vertical EconoMi$er IV with solidstate controller,
geardriven, damper, spring return actuator, up to 100% barometric relief,
supply and outdoor air temperature sensors, and CO2 sensor compatible,
for use in nonDDC applications.
036 − 072
CRECOMZR021A03
STANDARD LEAK Vertical EconoMi$er IV with solidstate controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air temperature sensors, and CO2
sensor compatible, for use in nonDDC applications.
090 − 150
CRECOMZR062A00
STANDARD LEAK Vertical EconoMi$er IV with solidstate controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air temperature sensors, and CO2
sensor compatible, for use in nonDDC applications.
180
HORIZONTAL
CRECOMZR024A02
STANDARD LEAK Horizontal EconoMi$er IV with solidstate controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air temperature sensors, and CO2
sensor compatible, for use in nonDDC applications.
036 − 072
CRECOMZR025A02
STANDARD LEAK Horizontal EconoMi$er IV with solidstate controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air temperature sensors, and CO2
sensor compatible, for use in nonDDC applications.
090 − 150
CRECOMZR064A00
STANDARD LEAK Horizontal EconoMi$er IV with solidstate controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air temperature sensors, and CO2
sensor compatible, for use in nonDDC applications.
180
1 EconoMi$er IV cannot be installed with an EconoMi$er X, Manual Damper, or Motorized Damper.2 When installed on a unit with hinged panels, hinged panel access kit is also required.
ECONOMI$ER X (FOR 1 & 2-SPEED INDOOR FAN MOTOR )STANDARD LEAK, CONTROLLER INCLUDED
VERTICAL
CRECOMZR076A00
STANDARD LEAK Vertical EconoMi$er X with solidstate W7220
controller, geardriven, modulating damper, spring return actuator, up to
100% barometric relief, supply and outdoor air temperature sensors, andCO2 sensor compatible, for use in electro mechanical controls only.
Controller meets California Title 24 Section 120.2 Fault Detection and
Diagnostic (FDD) requirements.
036 − 172
CRECOMZR078A00
STANDARD LEAK Vertical EconoMi$er X with solidstate W7220
controller, geardriven, modulating damper, spring return actuator, up to
100% barometric relief, supply and outdoor air temperature sensors, andCO2 sensor compatible, for use in electro mechanical controls only.
Controller meets California Title 24 Section 120.2 Fault Detection and
Diagnostic (FDD) requirements.
090 − 150
CRECOMZR080A00
STANDARD LEAK Vertical EconoMi$er X with solidstate W7220
controller, geardriven, modulating damper, spring return actuator, up to
100% barometric relief, supply and outdoor air temperature sensors, andCO2 sensor compatible, for use in electro mechanical controls only.
Controller meets California Title 24 Section 120.2 Fault Detection and
Diagnostic (FDD) requirements.
180
1 EconoMi$er X cannot be installed with an EconoMi$er IV, Manual Damper, or Motorized Damper.2 When installed on a unit with hinged panels, hinged panel access kit is also required.
Specifications subject to change without notice. 7513 21 3607 00
ACCESSORIES − RAS036−180 (cont.)ECONOMI$ER X (FOR 1 & 2-SPEED INDOOR FAN MOTOR )
STANDARD LEAK, CONTROLLER INCLUDEDHORIZONTAL
Model Number Description Use With ModelSize
CRECOMZR077A00
STANDARD LEAK Horizontal EconoMi$er X with solidstate W7220
controller, geardriven, modulating damper, spring return actuator, up to
100% barometric relief, supply and outdoor air temperature sensors, andCO2 sensor compatible, for use in electro mechanical controls only.
Controller meets California title 24 Section 120.2 Fault Detection and
Diagnostic (FDD) requirements.
036 − 172
CRECOMZR079A00
STANDARD LEAK Horizontal EconoMi$er X with solidstate W7220
controller, geardriven, modulating damper, spring return actuator, up to
100% barometric relief, supply and outdoor air temperature sensors, andCO2 sensor compatible, for use in electro mechanical controls only.
Controller meets California Title 24 Section 120.2 Fault Detection and
Diagnostic (FDD) requirements.
090 − 150
CRECOMZR081A00
STANDARD LEAK Horizontal EconoMi$er X with solidstate W7220
controller, geardriven, modulating damper, spring return actuator, up to
100% barometric relief, supply and outdoor air sensors, and CO2 sensorcompatible, for use in electro mechanical controls only. Controller meets
California Title 24 Section 120.2 Fault Detection and Diagnostic (FDD)
requirements.
180
1 EconoMi$er X cannot be installed with an EconoMi$er IV, Manual Damper, or Motorized Damper.2 When installed on a unit with hinged panels, hinged panel access kit is also required.
ECONOMI$ER X (FOR 1 & 2-SPEED INDOOR FAN MOTOR )ULTRA LOW LEAK, CONTROLLER INCLUDED
VERTICAL
CRECOMZR067A00
Ultra LOW LEAK Vertical EconoMi$er X with solidstate W7220 controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air temperature sensors, and CO2sensor compatible, for use in electro mechanical controls only. Also
includes return, outside air, and relief air damper leakage that meets Title 24
section 140.4 and ASHRAE 90.1 requirements. Controller meets CaliforniaTitle 24 Fault Detection and Diagnostic (FDD) requirements.
036 − 072
CRECOMZR069A00
Ultra LOW LEAK Vertical EconoMi$er X with solidstate W7220 controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air temperature sensors, and CO2sensor compatible, for use in electro mechanical controls only. Also
includes return, outside air, and relief air damper leakage that meets Title 24
section 140.4 and ASHRAE 90.1 requirements. Controller meets CaliforniaTitle 24 Fault Detection and Diagnostic (FDD) requirements
090 − 150
CRECOMZR071A00
Ultra LOW LEAK Vertical EconoMi$er X with solidstate W7220 controller,
geardriven, modulating damper, spring return actuator, up to 100%
barometric relief, supply and outdoor air sensors, and CO2 sensorcompatible, for use in electro mechanical controls only. Also includes return,
outside air, and relief air damper leakage that meets Title 24 section 140.4
and ASHRAE 90.1 requirements. Controller meets California Title 24 FaultDetection and Diagnostic (FDD) requirements.
180
1 EconoMi$er X cannot be installed with an EconoMi$er IV, Manual Damper or Motorized Damper.2 Currently only available on vertical air flow configuration models. Contact your local MicroMetl account manager18008844662 if horizontal model is required.3 When installed on a unit with hinged panels, hinged panel access kit is also required.
Specifications subject to change without notice.8 513 21 3607 00
ACCESSORIES − RAS036−180 (cont.)
ACCESSORY KITS FOR UNITS WITH HINGED ACCESS PANELSModel Number Description Use With Model Size
VERTICAL
CRPECONV003A00Vertical accessory kit used with installing a vertical economizer on a unitthat has hinged access panels. Includes angle and seal strip 036−072
CRPECONV004A00Vertical accessory kit used with installing a vertical economizer on a unitthat has hinged access panels. Includes angle and seal strip 090−150
CRPECONV007B00Vertical & Horizontal accessory kit used with installing a 2−positiondamper or vertical & horizontal economizer on a unit that has hingedaccess panels. Includes angle and seal strip
180
HORIZONTAL
CRHNGPNL001A00Horizontal accessory kit used with installing a vertical economizer on aunit that has hinged access panels. Includes angle and seal strip 036−072
CRHNGPNL002A00Horizontal accessory kit used with installing a vertical economizer on aunit that has hinged access panels. Includes angle and seal strip 090−150
CRHNGPNL003A00
Currently in development - please contact application engineering ...Hinged filter access door kit for use with horizontal economizeraccessory. Replaces door sent with economizer. Includes door panel,angle and seal strip.
180
ECONOMIZER SENSORSModel Number Description Use With Model Size
DNTEMPSN002A00Outdoor or Return Dry Bulb Temperature Sensor used withElectro−Mechanical control. ECONOMIZER IV
DNCBDIOX005A00CO2 Sensor for use in return airstream. Also includes Aspirator Boxrequired for Duct Mounting. ECONOMIZER IV & X
DNENTDIF004A00Return Air Enthalpy Sensor used with Electro−Mechanical controls, usewith AXB078ENT for differential enthalpy control. ECONOMIZER IV
AXB078ENT Accusensor II Economizer Differential Enthalpy Control Upgrade ECONOMIZER IV
CRTEMPSN005A00Outdoor or return dry bulb temperature sensor used with HoneywellW7220 electro−mechanical control. ECONOMIZER X
HH57AC081Enthalpy control for W7220 controller only. (One required for singleenthalpy, two required for differential enthalpy) ECONOMIZER X
NOTE: Supply air temperature sensor (SAT and low ambient lockout switch) provided with Economizer IV or Economizer X.
POWER EXHAUSTModel Number Description Use With Model Size
DNPWREXH030A01 Vertical Power Exhaust 208/230 volt (1 or 3 Phase) 036 − 072DNPWREXH021A01 Vertical Power Exhaust 460 volt 036 − 072DNPWREXH022A01 Vertical Power Exhaust 208/230 volt (1 or 3 Phase) 090 − 150DNPWREXH023A01 Vertical Power Exhaust 460 volt 090 − 150DNPWREXH080A00 Vertical Power Exhaust 208/230 volt 180DNPWREXH081A00 Vertical Power Exhaust 460 volt 180
NOTES Vertical Power Exhaust requires a vertical EconomizerVertical Power Exhaust package includes exhaust hood, screens, and propeller fan system
DNPWREXH028A01 Horizontal Power Exhaust 208/230 & 575 volt (1 or 3 Phase) 036 − 150DNPWREXH029A01 Horizontal Power Exhaust 460 volt 036 − 150DNPWREXH082A00 Horizontal Power Exhaust 208/230 & 575 volt 180DNPWREXH083A00 Horizontal Power Exhaust 460 volt 180
NOTES Horizontal Power Exhaust should be duct-mounted in the return ductHorizontal Power Exhaust package includes exhaust hood, screens, and propeller fan system
575V TRANSFORMERModel Number Description Use With Model Size
1171494Transformer for conversion from 575v to 208/230v power exhaust ap-plications.
ALL
NOTES:1. Vertical power exhaust package includes exhaust hood, screens and propeller fan system.2. 24” Roof curbs are NOT required with vertical power exhaust.3. Horizontal power exhaust should be ductmounted in the return ductwork and is supplied with a single fan and wiring har
ness.4. Both vertical and horizontal power exhaust packages can be used with either EconoMi$er IV or EconoMi$er X. In
either case, the power exhaust is controlled by the EconoMi$er IV, X controller.5. Order HT01AH859 / FAST# 1171494for 575V applications.
Specifications subject to change without notice. 9513 21 3607 00
Table 2 – AHRI COOLING RATING TABLES
UnitCoolingStages
Nom.Capacity
(tons)
Net CoolingCapacity (MBH)
TotalPower(KW)
SEER EER IEER IEER w/ 2−spd
036 1 3 34.6 3.1 13.0 11.00 N/A N/A048 1 4 45.0 4.0 13.0 11.00 N/A N/A060 1 5 59.0 5.5 13.0 10.75 N/A N/A072 1 6 70.0 6.4 N/A 11.20 11.4 N/A091 1 7.5 88.0 8.0 N/A 11.20 11.4 N/A090 2 7.5 83.0 7.4 N/A 11.20 11.7 13.0101 1 8.5 97.0 8.8 N/A 11.20 11.4 N/A102 2 8.5 99.0 8.8 N/A 11.20 11.7 13.0121 1 10 117.0 10.6 N/A 11.20 11.4 N/A120 2 10 114.0 10.1 N/A 11.30 12.2 13.0150 2 12.5 140.0 12.7 N/A 11.00 11.2 12.0180 2 15 174.0 15.8 N/A 11.00 11.5 12.6
LEGENDAHRI − Air Conditioning, Heating and Refrigeration
InstituteASHRAE − American Society of Heating, Refrigerating
and Air Conditioning, Inc.EER − Energy Efficiency RatioIEER − Integrated Energy Efficiency RatioSEER − Seasonal Energy Efficiency Ratio
Use of the AHRI CertifiedTM Mark indicates amanufacturer’s participation in the program For verification of certification for individual products, go to www.ahridirectory.org.
NOTES1. Rated and certified under AHRI Standard 210/240 or 340/360, as
appropriate.2. Ratings are based on:
Cooling Standard: 80�F (27�C) db, 67�F (19�C) wb indoor airtemp and 95�F db outdoor air temp. IEER Standard: A measure that expresses cooling part−loadEER efficiency for commercial unitary air conditioning and heatpump equipment on the basis of weighted operation at variousload capacities.
3. All RAS units comply with ASHRAE 90.1 Energy Standard forminimum SEER and EER requirements.
4. Where appropriate, RAS units comply with US Energy Policy Act(2005). Refer to state and local codes.
Table 3 – MINIMUM − MAXIMUM AIRFLOWS COOLING AND ELECTRIC HEAT
UnitCooling Electric Heaters
Minimum Maximum Minimum MaximumRAS036 900 1500 900 1500RAS048 1200 2000 1200 2000RAS060 1500 2500 1500 2500RAS072 1800 3000 1800 3000
RAS090/091 2250 3750 2250* 3750RAS101/102 2550 4250 2550* 4250RAS120/121 3000 5000 3000* 5000
RAS150 3600 6000 3000* 6000RAS180 4500 7500 4500 7500
* Minimum electric heat CFM exceptions :
UnitUnit
voltage Heater kWUnit
Configuration Required Minimum CFMRAS120/121
RAS150 208/230 42.4 Horizontal 3200
RAS120/121RAS150 208/230 50.0 Horizontal 3200
RAS120/121RAS150 460 50.0 Horizontal or Vertical 3200
RAS90/91 575 17.0 Horizontal or Vertical 2800RAS101/102RAS120/121
RAS150575 34.0 Horizontal or Vertical 2350
Specifications subject to change without notice.10 513 21 3607 00
Table 4 – SOUND PERFORMANCE TABLE
UnitCoolingStages
Outdoor Sound (dB) @60hzA−Weighted 63 125 250 500 1000 2000 4000 8000
036 1 80 90.6 80.9 80.2 76 74.6 71.3 68.5 63.9048 1 81 90.9 84.6 79.5 77.9 76.5 71.1 66.9 62.5060 1 78 84.0 82.2 76.3 74.8 72.5 68.8 65.6 61.8072 1 78 88.8 81.8 76.9 74.4 73.3 69.8 66.3 62.7091 1 82 90.1 82.6 81.0 79.4 77.0 73.0 70.4 66.7090 2 82 85.8 84.3 80.5 78.7 76.4 72.7 68.3 65.1101 1 83 91.2 86.4 81.9 81.0 78.3 73.9 71.4 67.3102 2 82 88.6 85.0 81.6 79.5 77.4 74.1 71.0 66.3121 1 82 88.6 85.0 81.6 79.5 77.4 74.1 71.0 66.3120 2 82 89.0 83.1 80.5 78.5 75.5 71.6 69.6 69.3150 2 87 87.0 85.2 84.6 84.9 82.2 78.4 75.3 72.9180 2 87 87.0 85.2 84.6 84.9 82.2 78.4 75.3 72.9
LEGENDdB − Decibel
NOTES: 1. Outdoor sound data is measure in accordance with AHRI
standard 270−2008.2. Measurements are expressed in terms of sound power. Do not
compare these values to sound pressure values because soundpressure accounts for specific environmental factors which donot match individual applications. Sound power values areindependent of the environment and therefore more accurate.
3. A−weighted sound ratings filter out very high and very lowfrequencies, to better approximate the response of an “average”human ear. A−weighted measurements for ICP units are taken inaccordance with 270−2008.
Specifications subject to change without notice. 11513 21 3607 00
Table 5 – PHYSICAL DATA (COOLING) 3 − 6 TONSRAS036 RAS048 RAS060 RAS072
Refrigeration System # Circuits / # Comp. / Type 1 / 1 / Scroll 1 / 1 / Scroll 1 / 1 / Scroll 1 / 1 / Scroll
Puron� refrig. (R−410A) (lbs−oz) 5−10 8−8 10−11 14−2Hot Gas Re−Heat Puron� refrig. charge A/B (lbs −
oz) 8−11 14−13 16−0 22−5
Metering Device Acutrol Acutrol Acutrol AcutrolHigh−press. Trip / Reset (psig) 630 / 505 630 / 505 630 / 505 630 / 505Low−press. Trip / Reset (psig) 54 / 117 54 / 117 54 / 117 54 / 117
Compressor Capacity Staging (%) 100% 100% 100% 100%Evap. Coil
Material (Tube/Fin) Cu / Al Cu / Al Cu / Al Cu / AlCoil type 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF
Rows / FPI 2 / 15 2 / 15 4 / 15 4 / 15Total Face Area (ft2) 5.5 5.5 5.5 7.3
Condensate Drain Conn. Size 3/4−in 3/4−in 3/4−in 3/4−inEvap. Fan and Motor
S
tan
dard
Sta
tic
1 p
hase
Motor Qty / Drive Type 1 / Belt 1 / Belt 1 / Belt −Max BHP 1.2 1.2 1.2 −
RPM Range 560−854 560−854 770−1175 −Motor Frame Size 48 48 48 −
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal −Fan Diameter (in) 10 x 10 10 x 10 10 x 10 −
Med
ium
Sta
tic
1 p
hase
Motor Qty / Drive Type 1 / Belt 1 / Belt 1 / Belt −Max BHP 1.2 1.2 1.5 −
RPM Range 770−1175 770−1175 1035−1466 −Motor Frame Size 48 48 56 −
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal −Fan Diameter (in) 10 x 10 10 x 10 10 x 10 −
Sta
nd
ard
Sta
tic
3 p
hase
Motor Qty / Drive Type 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 1.7 1.7 1.7 2.4
RPM Range 560−854 560−854 770−1175 1073−1457Motor Frame Size 48 48 48 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 10 x 10 10 x 10 10 x 10 10 x 10
Med
ium
Sta
tic
3 p
hase
Motor Qty / Drive Type 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 1.7 1.7 2.4 2.9*
RPM Range 770−1175 770−1175 1035−1466 1173−1518Motor Frame Size 48 48 56 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 10 x 10 10 x 10 10 x 10 10 x 10
Hig
h S
tatic
3 p
hase
Motor Qty / Drive Type 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 2.4 2.4 2.9 3.7
RPM Range 1035−1466 1035−1466 1303−1687 1474−1788Motor Frame Size 56 56 56 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 10 x 10 10 x 10 10 x 10 10 x 10
Cond. Coil Material (Tube/Fin) Cu / Al Cu / Al Cu / Al Cu / Al
Coil type 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPFRows / FPI 1 / 17 2 / 17 2 / 17 2 / 17
Total Face Area (ft2) 14.6 16.5 16.5 21.3Hot Gas Re−Heat Coil
Material (Tube/Fin) Cu / Al Cu / Al Cu / Al Cu / AlRows..Fins/in. 1 / 17 2 / 17 2 / 17 2 / 17
Total Face Area (ft2) 3.9 3.9 3.9 5.2Cond. fan / motor
Qty / Motor Drive Type 1/ Direct 1/ Direct 1/ Direct 1/ DirectMotor HP / RPM 1/4 / 1100 1/4 / 1100 1/4 / 1100 1/4 / 1100Fan diameter (in) 22 22 22 22
Filters RA Filter # / Size (in) 2 / 16 x 25 x 2 2 / 16 x 25 x 2 2 / 16 x 25 x 2 4 / 16 x 16 x 2
OA inlet screen # / Size (in) 1 / 20 x 24 x 1 1 / 20 x 24 x 1 1 / 20 x 24 x 1 1 / 20 x 24 x 1NOTE: Hot Gas Re−Heat is available with Round Tube / Plate Fin (RTPF).* 575V motor utilizes 3.7 BHP.
Specifications subject to change without notice.12 513 21 3607 00
Table 5 − PHYSICAL DATA (cont.) (COOLING) 7.5 − 8.5 TONS
RAS091 RAS090 RAS101 RAS102Refrigeration System
# Circuits / # Comp. / Type 1 / 1 / Scroll 2 / 2 / Scroll 1 / 1 / Scroll 2 / 2 / ScrollRTPF models R−410a charge A/B (lbs − oz) 13 − 12 8 − 5 / 8 − 2 15 − 4 10 − 5 / 10 − 12
Alternate (Hot Gas Re−Heat) R−410a charge A/B (lbs −oz) 13 − 3 / 13 − 3 16 − 13 / 16 − 13
Metering device Acutrol Acutrol Acutrol AcutrolHigh−press. Trip / Reset (psig) 630 / 505 630 / 505 630 / 505 630 / 505Low−press. Trip / Reset (psig) 54 / 117 54 / 117 54 / 117 54 / 117
Compressor Capacity Staging (%) 100% 50% / 100% 100% 50% / 100%Evap. Coil
Material Cu / Al Cu / Al Cu / Al Cu / AlCoil type 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF
Rows / FPI 3 / 15 3 / 15 3 / 15 3 / 15Total face area (ft2) 8.9 8.9 11.1 11.1
Condensate drain conn. size 3/4−in 3/4−in 3/4−in 3/4−inHot Gas Re−Heat Coil
Material − Cu / Al − Cu / AlCoil type − 3/8−in RTPF − 3/8−in RTPF
Rows / FPI − 2 / 17 − 2 / 17Total face area (ft2) − 6.3 − 8.4
Evap. fan and motor
Sta
nd
ard
Sta
tic
3 p
hase
Motor Qty / Drive Type 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 1.7 1.7 1.7 1.7
RPM range 489−747 489−747 518−733 518−733Motor frame size 56 56 56 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 15 x 15 15 x 15 15 x 15 15 x 15
Med
ium
Sta
tic
3 p
hase
Motor Qty / Drive type 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 2.9 2.9 2.4 2.4
RPM range 733−949 733−949 690−936 690−936Motor frame size 56 56 56 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 15 x 15 15 x 15 15 x 15 15 x 15
Hig
h S
tatic
3 p
hase
Motor Qty / Drive type 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 4.7 4.7 3.7 3.7
RPM range 909−1102 909−1102 838−1084 838−1084Motor frame size 14 14 56 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 15 x 15 15 x 15 15 x 15 15 x 15
Cond. Coil Material Cu / Al Cu / Al Cu / Al Cu / Al
Coil type 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPFRows / FPI 2 / 17 2 / 17 2 / 17 2 / 17
Total face area (ft2) 20.5 20.5 21.4 25.1Cond. fan / motor
Qty / Motor drive type 2 / direct 2 / direct 2 / direct 2 / directMotor HP / RPM 1/4 / 1100 1/4 / 1100 1/4 / 1100 1/4 / 1100Fan diameter (in) 22 22 22 22
Filters RA Filter # / Size (in) 4 / 16 x 20 x 2 4 / 16 x 20 x 2 4 / 20 x 20 x 2 4 / 20 x 20 x 2
OA inlet screen # / Size (in) 1 / 20 x 24 x 1 1 / 20 x 24 x 1 1 / 20 x 24 x 1 1 / 20 x 24 x 1
NOTE: Hot Gas Re−Heat is available with Round Tube / Plate Fin (RTPF).
Specifications subject to change without notice. 13513 21 3607 00
Table 5 − PHYSICAL DATA (cont.) (COOLING) 10 − 15 TONSRAS121 RAS120 RAS150 RAS180 ’E’ RAS180 ’G’
Refrigeration System # Circuits / # Comp. / Type 1 / 1 / Scroll 2 / 2 / Scroll 2 / 2 / Scroll 2 / 2 / Scroll 2 / 2 / Scroll
RTPF models R−410a charge A/B (lbs − oz) 20 − 0 10 − 5 / 10 − 3 11 − 0 / 11 − 6 15−14/16−12 15−14/16−12Alternate (Hot Gas Re−Heat) R−410a charge A/B
(lbs − oz) − 16 − 10 / 16 − 0 17 − 10 / 18 − 3 − −
Metering device Acutrol Acutrol Acutrol Acutrol TXVHigh−press. Trip / Reset (psig) 630 / 505 630 / 505 630 / 505 630 / 505 630 / 505
Low−press. Trip / Reset (psig) 54 / 117 54 / 117 54 / 117 54 / 117 27 / 44Compressor Capacity Staging (%) 100% 50% / 100% 50% / 100% 50% / 100% 50% / 100%
Evap. Coil Material Cu / Al Cu / Al Cu / Al Cu / Al Cu / Al
Coil type 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPFRows / FPI 4 / 15 4 / 15 4 / 15 3 / 15 3 / 15
Total face area (ft2) 11.1 11.1 11.1 17.5 17.5Condensate drain conn. size 3/4−in 3/4−in 3/4−in 3/4−in 3/4−in
Hot Gas Re−Heat Coil Material − Cu / Al Cu / Al − Cu / Al
Coil type − 3/8−in RTPF 3/8−in RTPF − 3/8−in RTPFRows / FPI − 2 / 17 2 / 17 − 1 / 17
Total face area (ft2) − 8.4 8.4 − 13.8Evap. fan and motor
Sta
nd
ard
Sta
tic
3 p
hase
Motor Qty / Drive type 1 / Belt 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 2.4 2.4 2.9 2.9 2.9
RPM range 591−838 591−838 652−843 507−676 507−676Motor frame size 56 56 56 56 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 15 x 15 15 x 15 15 x 15 18 x 18 18 x 18
Med
ium
Sta
tic
3 p
hase
Motor Qty / Drive type 1 / Belt 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 3.7 3.7 3.7 3.7 3.7
RPM range 838−1084 838−1084 838−1084 627−851 627−851Motor frame size 56 56 56 56 56
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 15 x 15 15 x 15 15 x 15 18 x 18 18 x 18
Hig
h S
tatic
3 p
hase
Motor Qty / Drive type 1 / Belt 1 / Belt 1 / Belt 1 / Belt 1 / BeltMax BHP 4.7 4.7 4.7 6.1 6.1
RPM range 1022−1240 1022−1240 1022−1240 776−955 776−955Motor frame size 14 14 14 S184T S184T
Fan Qty / Type 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / Centrifugal 1 / CentrifugalFan Diameter (in) 15 x 15 15 x 15 15 x 15 18 x 18 18 x 18
Cond. Coil Material Cu / Al Cu / Al Cu / Al Cu / Al Cu / Al
Coil type 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPF 3/8−in RTPFRows / FPI 2 / 17 2 / 17 3 / 17 2/17 2/17
Total face area (ft2) 25.1 25.1 25.1 2 @ 23.1 2 @ 23.1Cond. fan / motor
Qty / Motor drive type 2 / direct 2 / direct 1 / direct 3 / direct 3 / directMotor HP / RPM 1/4 / 1100 1/4 / 1100 1 / 1175 1/4 / 1100 1/4 / 1100Fan diameter (in) 22 22 30 22 22
Filters RA Filter # / Size (in) 4 / 20 x 20 x 2 4 / 20 x 20 x 2 4 / 20 x 20 x 2 6 / 18 x 24 x 2 6 / 18 x 24 x 2
2 / 24 x 27 x 1(vert.)
2 / 24 x 27 x 1(vert.)
OA inlet screen # / Size (in) 1 / 20 x 24 x 1 1 / 20 x 24 x 1 1 / 20 x 24 x 11 / 30 x 39 x 1
(horiz)1 / 30 x 39 x 1
(horiz)NOTE: Hot Gas Re−Heat is available with Round Tube / Plate Fin (RTPF).
Specifications subject to change without notice.14 513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS
2563
6[
]
18-1
/845
9[
]12
-1/4
312
[]
14-1
/436
3[
]
16-1
/841
1[
]
21-1
/453
9[
]
26-3
/468
1[
]
717
7[
]
RETU
RNA
IR
25-1
/863
8[
]
10-1
/226
5[
]
SUPP
LY A
IR
16-3
/442
7[
]11
-3/8
289
[]
J
19-1
/249
4[
]
6-5/
816
8[
]
4-5/
811
8[
]
K
SUPP
LYA
IR
17-3
/445
1[
]
12-1
/830
7[
]
10-7
/827
7[
]RE
TURN
AIR
25-5
/865
2[
]
33-3
/884
8[
]
1640
6[
]
6-1/
815
5[
]
615
2[
]
31-1
/479
3[
]
74-3
/818
88[
]
46-3
/411
87[
]
4411
17[
]
26-1
/267
3[
]
6-1/
415
7[
]
29-3
/874
7[
]
32-1
/481
8[
]
2-5/
867
[]
6-5/
816
8[
]
3-3/
885
[]
18-1
/247
0[
]
3-3/
495
[]
1-1/
432
[]
CON
NEC
TIO
NSI
ZES
A1
3/8"
[35]
DIA
FIE
LD P
OW
ER S
UPP
LY H
OLE
B2"
[51]
DIA
PO
WER
SU
PPLY
KN
OCK
OU
T
C1
3/4"
[44]
DIA
GA
UG
E A
CCES
S PL
UG
D7/
8" [2
2] D
IA F
IELD
CO
NTR
OL
WIR
ING
HO
LE
E3/
4"-1
4 N
PT C
ON
DEN
SATE
DRA
IN
G2
1/2
" [64
] DIA
PO
WER
SU
PPLY
KN
OCK
-OU
T
UN
ITJ
K
50TC
-A04
33 3
/8[8
47]
18 5
/8[4
72]
50TC
-A05
33 3
/8[8
47]
14 7
/8[3
77]
50TC
-A06
33 3
/8[8
47]
14 7
/8[3
77]
50TC
-A07
41 3
/8[1
051]
14 7
/8[3
77]
THRU
-TH
E-BA
SE C
HA
RTTH
ESE
HO
LES
REQ
UIR
ED F
OR
USE
CRBT
MPW
R001
A01
THRE
AD
EDCO
ND
UIT
SIZ
EW
IRE
USE
REQ
'D H
OLE
SIZE
S (M
AX.
)
W1/
2"A
CC.
7/8"
[22.
2]
X1/
2"24
V7/
8" [2
2.2]
Y *
3/4"
(001
)PO
WER
1 1/
8" [2
8.4]
FOR
"TH
RU-T
HE-
BASE
PAN
" FA
CTO
RY O
PTIO
N,
FITT
ING
S FO
R O
NLY
X
& Y
ARE
PR
OVI
DED
*SE
LECT
EIT
HER
3/4
" OR
1/2"
FOR
POW
ER, D
EPEN
DIN
G O
N W
IRE
SIZE
NO
TES:
1. D
IMEN
SIO
NS
ARE
IN IN
CHES
, DIM
ENSI
ON
S
IN [
] A
RE IN
MIL
LIM
ETER
S.
2.
C
ENTE
R O
F G
RAVI
TY
3.
DIR
ECTI
ON
OF
AIR
FLO
W
IND
OO
R BL
OW
ERA
CCES
SCO
NTR
OL
BOX
ACC
ESS
PAN
EL
FRO
NT
CON
DEN
SER
COIL
ECO
NO
MIZ
ER H
OO
D (O
PTIO
NA
L)
RETU
RNA
IR
SUPP
LYA
IR
RETU
RNA
IR
SUPP
LYA
IRLE
FTRI
GH
T
TOP
BACK
IND
OO
R CO
ILA
CCES
S PA
NEL
FILT
ER A
CCES
S PA
NEL
(TO
OL-
LESS
)
TYP
CURB
WID
TH
COM
P.A
CCES
SPA
NEL
CON
DEN
SER
COIL
OU
TSID
EA
IR
BARO
MET
RIC
RELI
EFFL
OW
ELEC
TRIC
AL
DIS
CON
NEC
TLO
CATI
ON
A,
B, G D
OPT
ION
AL
FACT
ORY
INST
ALL
EDCO
NVE
NIE
NCE
OU
TLET
HA
ND
LEH
AN
DLE
OPT
ION
AL
FACT
ORY
INST
ALL
EDD
ISCO
NN
ECT
SEE
THRU
TH
EBA
SE C
HA
RT
E A
LT.
CON
DEN
SATE
DRA
IN O
PEN
ING
IN B
ASE
PAN
C
W X Y
E ST
D.
CON
DEN
SATE
DRA
IN
FILT
ER
C14163B
Fig. 1 − Dimensions RAS036−071
Specifications subject to change without notice. 15513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
X
Y
Z
UNITSTD. UNIT
WEIGHTCORNER
WEIGHT (A)CORNER
WEIGHT (B)CORNER
WEIGHT (C)CORNER
WEIGHT (D) C.G. HEIGHT
LBS. KG. LBS. KG. LBS. KG. LBS. KG. LBS. KG. X Y Z
438 199 108 49 115 52 110 50 104 47 38 [965] 22 [559] 17 1/4 [438]
494 224 122 55 130 59 125 57 117 53 38 [965] 22 [559] 17 1/2 [445]
524 238 130 59 138 63 132 60 124 56 38 [965] 22 [559] 17 3/4 [451]
607 275 150 68 160 73 153 69 144 65 38 [965] 22 [559] 20 3/4 [527]
CORNER A CORNER B
CORNER CCORNER D
FRONT
TOP
C14164B
Fig. 2 − Dimensions RAS036−072
C
B
A
D
C08337
Fig. 3 − Service Clearance
LOC DIMENSION CONDITION
A
48−in (1219 mm) Unit disconnect is mounted on panel18−in (457 mm) No disconnect, convenience outlet option18−in (457 mm) Recommended service clearance12−in (305 mm) Minimum clearance
B42−in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall)36−in (914 mm) Surface behind servicer is electrically non−conductive (e.g., wood, fiberglass)
Special Check for sources of flue products within 10−ft of unit fresh air intake hood
C36−in (914 mm) Side condensate drain is used18−in (457 mm) Minimum clearance
D42−in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall, another unit)36−in (914 mm) Surface behind servicer is electrically non−conductive (e.g., wood, fiberglass)
NOTE: Unit not designed to have overhead obstruction. Contact Application Engineering for guidance on any application planning overhead ob-struction or vertical clearances.
Specifications subject to change without notice.16 513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
EE
7/16
"[1
1]
4 9/
16"
[115
.5]
1/4"
[7.0
]
5' 7
-3/8
"[1
711.
3]
1' 4
-13/
16"
[4
27] I
NS
IDE
1-3/
4"[4
4.4]
2-3/
8"[6
1]
1-3/
4"[4
4.5]
1.00
"[2
5.4]
"A"
1-3/
4"[4
4.4]
21.7
4"[5
52.2
]5.42
"[1
37.7
]11
.96"
[303
.8]
4.96
"[1
26.0
]70
.87"
[180
0.2]
40.6
9"[1
033.
5]
21.8
4"[5
54.7
]
16.0
3"[4
07.2
]
1.75
"[4
4.5]
20.4
1"[5
18.3
]3.
00"
[76.
2]13
.78"
[350
.0]
14.0
0"[3
55.6
]
3.00
"[7
6.2]
15.1
9"[3
85.8
]
32.1
9"[8
17.6
]
3'-1
3/1
6"[9
44.6
]
"A"
1-3/
4"[4
4.5]
CR
BTM
PW
R00
1A01
3/4"
[19]
NP
T3/
4" [1
9] N
PT
1/2"
[12.
7] N
PT
CR
RFC
UR
B00
2A01
CO
NN
EC
TOR
PK
G. A
CC
.G
AS
CO
NN
EC
TIO
N T
YP
EG
AS
FIT
TIN
GP
OW
ER
WIR
ING
FI
TTIN
GC
ON
TRO
L W
IRIN
G
FITT
ING
AC
CE
SS
OR
Y C
ON
VE
NIE
NC
E
OU
TLE
T W
IRIN
G C
ON
NE
CTO
R
THR
U T
HE
CU
RB
1/2"
[12.
7] N
PT
1/2"
[12.
7] N
PT
CR
BTM
PW
R00
3A01
THR
U T
HE
BO
TTO
M
RO
OF
CU
RB
AC
CE
SS
OR
Y #
A
CR
RFC
UR
B00
1A01
14"
[356
]
24"
[610
]
DR
AW
ING
NU
MB
ER
RE
V
48TC
4004
27B
NO
TES
:1.
RO
OFC
UR
B A
CC
ES
SO
RY
IS S
HIP
PE
D D
ISA
SS
EM
BLE
D.
2. IN
SU
LATE
D P
AN
ELS
: 25.
4 [1
"] TH
K. P
OLY
UR
ETH
AN
E F
OA
M, 4
4.5
[1-3
/4] #
DE
NS
ITY
.3.
DIM
EN
SIO
NS
IN [
] A
RE
IN M
ILLI
ME
TER
S.
4. R
OO
FCU
RB
: 18
GA
GE
STE
EL.
5. A
TTA
CH
DU
CTW
OR
K T
O C
UR
B. (
FLA
NG
ES
OF
DU
CT
RE
ST
ON
CU
RB
).6.
SE
RV
ICE
CLE
AR
AN
CE
4 F
EE
T O
N E
AC
H S
IDE
.7.
D
IRE
CTI
ON
OF
AIR
FLO
W.
8. C
ON
NE
CTO
R P
AC
KA
GE
CR
BTM
PW
R00
1A01
IS F
OR
TH
RU
-TH
E-C
UR
B G
AS
TY
PE
P
AC
KA
GE
CR
BTM
PW
R00
3A01
IS F
OR
TH
RU
-TH
E-B
OTT
OM
TY
PE
GA
S C
ON
NE
CTI
ON
S.
TYP
ICA
L (4
) SID
ES
SU
PP
LY A
IRR
ETU
RN
AIR
RO
OFI
NG
MA
TER
IAL
(FIE
LD S
UP
PLI
ED
)
CA
NT
STR
IP(F
IELD
SU
PP
LIE
D)
RO
OFI
NG
FE
LT(F
IELD
SU
PP
LIE
D)
CO
UN
TER
FLA
SH
ING
(FIE
LD S
UP
PLI
ED
)
UN
ITG
AS
KE
T(S
UP
PLI
ED
WIT
H C
UR
B)
RIG
ID IN
SU
LATI
ON
(FIE
LD S
UP
PLI
ED
)
DU
CT
(FIE
LD S
UP
PLI
ED
)
NA
IL (F
IELD
SU
PP
LIE
D)
CE
RTI
FIE
D D
RA
WIN
G
VIE
W "B
"C
OR
NE
R D
ETA
IL
SE
E V
IEW
"B"
RE
TUR
N A
IRS
UP
PLY
AIR
SU
PP
LY A
IRO
PE
NIN
G
RE
TUR
N A
IRO
PE
NIN
G
GA
S S
ER
VIC
E P
LATE
TH
RU
TH
E C
UR
B
DR
ILL
HO
LE
2"
[50.
8] @
A
SS
EM
BLY
(IF
RE
QU
IRE
D)
(SE
E N
OTE
#8)
SE
E N
OTE
#2
11 3
/4"[2
98.5
] WID
EIN
SU
LATE
D D
EC
K P
AN
ELS
8 9/
16"[2
17.5
] WID
EIN
SU
LATE
D D
EC
K P
AN
EL
1/3/
4"[4
4.5]
SC
ALE
0.2
50E
-ES
EC
TIO
N
C14147
Fig. 4 − Roof Curb Details RAS036−072
Specifications subject to change without notice. 17513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
C101205B
Fig. 5 − Dimensions RAS090−121
Specifications subject to change without notice.18 513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
FRONT
C101206B
Fig. 6 − Dimensions RAS090−121
C
D
AB
C11247
Fig. 7 − Service Clearance
LOC DIMENSION CONDITION
A
48−in (1219 mm) Unit disconnect is mounted on panel36−in (914 mm) If dimension−B is 12−in (305 mm)18−in (457 mm) No disconnect, convenience outlet option18−in (457 mm) Recommended service clearance (use electric screwdriver)12−in (305 mm) Minimum clearance (use manual ratchet screwdriver)
B36−in (914 mm) Unit has economizer12−in (305 mm) If dimension−A is 36−in (914 mm)
Special Check for sources of flue products within 10−ft of unit fresh air intake hood
C36−in (914 mm) Side condensate drain is used18−in (457 mm) Minimum clearance
D42−in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall, another unit)36−in (914 mm) Surface behind servicer is electrically non−conductive (e.g., wood, fiberglass)
NOTE: Unit not designed to have overhead obstruction. Contact Application Engineering for guidance on any application planning overhead ob-struction or vertical clearances.
Specifications subject to change without notice. 19513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
UN
ITO
UTD
OO
R C
OIL
TY
PE
H
RTP
F15
7/8
[403
]
RTP
F - R
OU
ND
TU
BE
, PLA
TE F
IN (C
OP
PE
R/A
LUM
)
CO
NN
EC
TIO
N S
IZE
S
A1
3/8"
[35]
DIA
FIE
LD P
OW
ER
SU
PP
LY H
OLE
B2
1/2"
[64]
DIA
PO
WE
R S
UP
PLY
KN
OC
KO
UT
C1
3/4"
[51]
DIA
GA
UG
E A
CC
ES
S P
LUG
D7/
8" [2
2] D
IA F
IELD
CO
NTR
OL
WIR
ING
HO
LE
E3/
4"-1
4 N
PT
CO
ND
EN
SA
TE D
RA
IN
G2"
[51]
DIA
PO
WE
R S
UP
PLY
KN
OC
K-O
UT
THR
U-T
HE
-BA
SE
CH
AR
TTH
ES
E H
OLE
S R
EQ
UIR
ED
FO
R U
SE
CR
BTM
PW
R00
2A01
THR
EA
DE
DC
ON
DU
IT S
IZE
WIR
EU
SE
RE
Q'D
HO
LES
IZE
S (M
AX
.)
W1/
2"A
CC
.7/
8" [2
2.2]
X1/
2"24
V7/
8" [2
2.2]
Y1
1/4"
(002
)P
OW
ER
1 3/
4" [4
4.4]
FOR
"TH
RU
-TH
E-B
AS
EP
AN
" FA
CTO
RY
OP
TIO
N,
FITT
ING
S F
OR
ON
LY X
& Y
AR
E P
RO
VID
ED
BA
CK
IND
OO
R C
OIL
AC
CE
SS
PA
NE
L
FILT
ER
AC
CE
SS
PA
NE
L(D
ISP
OS
AB
LE F
ILTE
RS
)
CO
ND
EN
SE
RC
OIL
88-1
/8[2
238]
2-5/
8[6
7]TY
PC
UR
BW
IDTH49-3
/8[1
253]
IND
OO
R B
LOW
ER
AC
CE
SS
CO
NTR
OL
BO
XA
CC
ES
S P
AN
EL
FRO
NT
HA
ND
LEH
AN
DLE
OP
TIO
NA
LFA
CTO
RY
INS
TALL
ED
DIS
CO
NN
EC
T
59-1
/2[1
510]
6-5/
8[1
68]
36 [913
]
4-5/
8[1
18]
H
3-3/
4[9
5]
CO
ND
EN
SE
RC
OIL
LEFT
A,
B,
G D C
ELE
CTR
ICA
LD
ISC
ON
NE
CT
LOC
ATI
ON
OP
TIO
NA
LFA
CTO
RY
INS
TALL
ED
CO
NV
EN
IEN
CE
OU
TLE
T
NO
TES
:
1. D
IME
NS
ION
S A
RE
IN IN
CH
ES
, DIM
EN
SIO
NS
IN
[ ]
AR
E IN
MIL
LIM
ETE
RS
.
2.
3.
C
EN
TER
OF
GR
AV
ITY
DIR
EC
TIO
N O
F A
IR F
LOW
11 [279
]
14 [355
]
16 [412
]
18 [469
]
29-5
/8[7
51]
25-1
/2[6
46]
37-5
/8[9
55]
36-3
/8[9
25]
RE
TUR
N A
IR
12-5
/8[3
21]
40-3
/8[1
027]
6-1/
4[1
59]
20-3
/4[5
26]
40-3
/8[1
026]
3-1/
4[8
3]14 [3
56]
28-3
/4[7
31]
SU
PP
LYA
IR
EC
ON
OM
IZE
R H
OO
D (O
PTI
ON
AL)
RE
TUR
NA
IR SU
PP
LYA
IR
E A
LT.
CO
ND
EN
SA
TED
RA
IN O
PE
NIN
GIN
BA
SE
PA
N
SE
ETH
RU
-TH
E-B
AS
EC
HA
RT
W X Y -
28-3
/8[7
20]
SU
PP
LY A
IR
13-7
/8[3
53]
12-5
/8[3
21]
26 [649
]
5-3/
4[1
46]
6-3/
8[1
61]
7 [177
]
37-7
/8[9
63]
42 [106
6]
5-3/
4[1
46]
36-3
/8[9
25]
RE
TUR
NA
IR
RIG
HT
OU
TSID
EA
IR
BA
RO
ME
TRIC
RE
LIE
FFL
OW
E S
TD.
CO
ND
EN
SA
TED
RA
INFI
LTE
R
2-7/
8[7
3]
C101207B
Fig. 8 − Dimensions RAS150
Specifications subject to change without notice.20 513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
Y
X
CORNER ACORNER B
CORNER CCORNER D
TOP
Z
FRONT
RTPF - ROUND TUBE, PLATE FIN (COPPER/ALUM)
OUTDOOR COIL TYPE
RTPF 1075 489 340 155 155 70 181 82 399 181 27 1/2 [699] 32 [813] 20 1/2 [523]
UNIT
STD. UNIT WEIGHT***
CORNERWEIGHT (A)
CORNERWEIGHT (B)
CORNERWEIGHT (C)
CORNERWEIGHT (D)
C.G.
LBS. KG. LBS. KG. LBS. KG. LBS. KG. LBS. KG. X Y Z
C101208B
Fig. 9 − Dimensions RAS150
C
B
A
D
C08337
Fig. 10 − Service Clearance
LOC DIMENSION CONDITION
A
48−in (1219 mm) Unit disconnect is mounted on panel18−in (457 mm) No disconnect, convenience outlet option18−in (457 mm) Recommended service clearance12−in (305 mm) Minimum clearance
B42−in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall)36−in (914 mm) Surface behind servicer is electrically non−conductive (e.g., wood, fiberglass)
Special Check for sources of flue products within 10−ft of unit fresh air intake hood
C36−in (914 mm) Side condensate drain is used18−in (457 mm) Minimum clearance
D42−in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall, another unit)36−in (914 mm) Surface behind servicer is electrically non−conductive (e.g., wood, fiberglass)
NOTE: Unit not designed to have overhead obstruction. Contact Application Engineering for guidance on any application planning overhead ob-struction or vertical clearances.
Specifications subject to change without notice. 21513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
7/16
"[1
1]
4 9/
16"
[115
.5]
1/4"
[7.0
]
"A"
1 3/
4"[4
4.5]
1 3/
4"[4
4.4]
20-3
/4"
[513
]IN
SID
E
"A"
81 3
/4"
[207
6.3]
53 1
/2"
[135
8.9]
1 3/
4"[4
4.5]
40 3
/16"
[102
0.8]
2 1/
4"[5
7.2]
26"
[660
.4]
4 3/
16"
[106
.0]
6 3/
64"
[153
.5]
32 9
/16"
[827
.1]
23 1
/16"
[585
.8]
31 1
7/32
"[8
00.9
]1
3/4"
[44.
5]
15 1
3/16
"[4
01.6
]
11.4
2"[2
90.0
]
1 3/
4"[4
4.4]
3"[7
6.2]
2-3/
8"[6
1]
14 3
/4"
[374
.7]
6' 6
-1/4
"[1
987.
5]
1-3
/4"
TY
P [4
4.5]
4' 2
"[1
270.
0]
15 1
5/32
[392
.9]
1.00
"[2
5.4]
CR
BTM
PW
R00
2A01
3/4"
[19]
NP
T1
1/4"
[31.
7] N
PT
CR
RFC
UR
B00
4A01
CO
NN
EC
TOR
PK
G. A
CC
.G
AS
CO
NN
EC
TIO
N T
YP
EG
AS
FIT
TIN
GP
OW
ER
WIR
ING
FI
TTIN
GC
ON
TRO
L W
IRIN
G
FITT
ING
AC
CE
SS
OR
Y C
ON
VE
NIE
NC
E
OU
TLE
T W
IRIN
G C
ON
NE
CTO
R
THR
U T
HE
CU
RB
1/2"
[12.
7] N
PT
1/2"
[12.
7] N
PT
CR
BTM
PW
R00
4A01
THR
U T
HE
BO
TTO
M
RO
OF
CU
RB
AC
CE
SS
OR
Y #
A
CR
RFC
UR
B00
3A01
14"
[356
]
24"
[610
]
DR
AW
ING
NU
MB
ER
RE
V
50H
J405
012
C
NO
TES
:1.
RO
OFC
UR
B A
CC
ES
SO
RY
IS S
HIP
PE
D D
ISA
SS
EM
BLE
D.
2. IN
SU
LATE
D P
AN
ELS
: 25.
4 [1
"] TH
K. P
OLY
UR
ETH
AN
E F
OA
M, 4
4.5
[1-3
/4] #
DE
NS
ITY
.3.
DIM
EN
SIO
NS
IN [
] A
RE
IN M
ILLI
ME
TER
S.
4. R
OO
FCU
RB
: 18
GA
GE
STE
EL.
5. A
TTA
CH
DU
CTW
OR
K T
O C
UR
B. (
FLA
NG
ES
OF
DU
CT
RE
ST
ON
CU
RB
).6.
SE
RV
ICE
CLE
AR
AN
CE
4 F
EE
T O
N E
AC
H S
IDE
.7.
D
IRE
CTI
ON
OF
AIR
FLO
W.
8. C
ON
NE
CTO
R P
AC
KA
GE
CR
BTM
PW
R00
2A01
IS F
OR
TH
RU
-TH
E-C
UR
B G
AS
TY
PE
P
AC
KA
GE
CR
BTM
PW
R00
4A01
IS F
OR
TH
RU
-TH
E-B
OTT
OM
TY
PE
GA
S C
ON
NE
CTI
ON
S.
TYP
ICA
L (4
) SID
ES
SU
PP
LY A
IRR
ETU
RN
AIR
RO
OFI
NG
MA
TER
IAL
(FIE
LD S
UP
PLI
ED
)
CA
NT
STR
IP(F
IELD
SU
PP
LIE
D)
RO
OFI
NG
FE
LT(F
IELD
SU
PP
LIE
D)
CO
UN
TER
FLA
SH
ING
(FIE
LD S
UP
PLI
ED
)
UN
ITG
AS
KE
T(S
UP
PLI
ED
WIT
H C
UR
B)
RIG
ID IN
SU
LATI
ON
(FIE
LD S
UP
PLI
ED
)
DU
CT
(FIE
LD S
UP
PLI
ED
)
NA
IL (F
IELD
SU
PP
LIE
D)
VIE
W "B
"C
OR
NE
R D
ETA
IL
SE
CTI
ON
TH
RU
SID
E
SE
E V
IEW
"B
"
GA
S S
ER
VIC
E P
LATE
TH
RU
TH
E C
UR
B
DR
ILL
HO
LE
2"
[50.
8] @
A
SS
EM
BLY
(IF
RE
QU
IRE
D)
(SE
E N
OTE
#8)
SE
E N
OTE
#2
12-1
/2" [
317.
5] W
IDE
INS
ULA
TED
DE
CK
PA
NE
LS
9-15
/16"
[252
.4] W
IDE
INS
ULA
TED
DE
CK
PA
NE
L
SU
PP
LY A
IRR
ETU
RN
AIR
SU
PP
LY A
IRO
PE
NIN
G
RE
TUR
N A
IRO
PE
NIN
G
C14148
Fig. 11 − Roof Curb Details RAS090−150
Specifications subject to change without notice.22 513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
C14184B
Fig. 12 − Dimensions RAS180
Specifications subject to change without notice. 23513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
C14185B
Fig. 13 − Dimensions RAS180
Specifications subject to change without notice.24 513 21 3607 00
C
BA
D
C10578B
Fig. 14 − Service Clearance
LOC DIMENSION CONDITION
A
48−in (1219 mm) Unit disconnect is mounted on panel18−in (457 mm) No disconnect, convenience outlet option18−in (457 mm) Recommended service clearance12−in (305 mm) Minimum clearance
B42−in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall)36−in (914 mm) Surface behind servicer is electrically non−conductive (e.g., wood, fiberglass)
Special Check for sources of flue products within 10−ft of unit fresh air intake hood
C36−in (914 mm) Side condensate drain is used18−in (457 mm) Minimum clearance
D
48−in (1219 mm) No flue discharge accessory installed, surface is combustible material42−in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall, another unit)36−in (914 mm) Surface behind servicer is electrically non−conductive (e.g., wood, fiberglass)
Special Check for adjacent units or building fresh air intakes within 10−ft of this unit’s flue outlet
NOTE: Unit not designed to have overhead obstruction. Contact Application Engineering for guidance on any application planning overhead obstruction or vertical clearances.
Specifications subject to change without notice. 25513 21 3607 00
CURBS, WEIGHTS & DIMENSIONS (cont.)
C10772B
Fig. 15 − Roof Curb Details RAS180
Specifications subject to change without notice.26 513 21 3607 00
OPTION / ACCESSORY WEIGHTS
Option / Accessory
OPTION / ACCESSORY WEIGHTS036 048 060 072 090/091 101/102 120/121 150 180
lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kgHot Gas Re−Heat1 50 23 50 23 50 23 55 25 80 36 80 36 80 36 85 39 90 41Power Exhaust − vertical 50 23 50 23 50 23 50 23 75 34 75 34 75 34 75 34 85 39Power Exhaust − horizontal 30 14 30 14 30 14 30 14 30 14 30 14 30 14 30 14 75 34EconoMi$er (IV, X or 2) 50 23 50 23 50 23 50 23 75 34 75 34 75 34 75 34 115 52Two Position damper 39 18 39 18 39 18 39 18 58 26 58 26 58 26 58 26 65 29Manual Dampers 12 5 12 5 12 5 12 5 18 8 18 8 18 8 18 8 25 11Hail Guard (louvered) 16 7 16 7 16 7 16 7 34 15 34 15 34 15 34 15 45 20Cu/Cu Condenser Coil2 6 3 13 6 13 6 15 7 12 5 23 10 23 10 23 10 190 86Cu/Cu Cond. & Evaporator Coils2 12 5 19 9 21 10 26 12 25 11 49 22 49 22 49 22 280 127Roof Curb (14−in. curb) 115 52 115 52 115 52 115 52 143 65 143 65 143 65 143 65 180 82Roof Curb (24−in. curb) 197 89 197 89 197 89 197 89 245 111 245 111 245 111 245 111 255 116CO2 sensor 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2Electric Heater 30 14 30 14 30 14 30 14 45 20 45 20 45 20 45 20 25 11Single Point Kit 10 5 10 5 10 5 10 5 12 5 12 5 12 5 15 7 25 11Optional Indoor Motor / Drive 10 5 10 5 10 5 10 5 15 7 15 7 15 7 15 7 45 20Motor Master Controller 35 16 35 16 35 16 35 16 35 16 35 16 35 16 40 18 35 16Return Smoke Detector 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2Supply Smoke Detector 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2Non−Fused Disconnect 15 7 15 7 15 7 15 7 15 7 15 7 15 7 15 7 15 7Non−Powered Convenience outlet 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2Enthalpy Sensor 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1Differential Enthalpy Sensor 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 1 3 12−speed indoor fan motor System withVFD − − − − − − − − 20 9 20 9 20 9 20 9 20 9
NOTE: Where multiple variations are available, the heaviest combination is listed.− Not Available1 For Hot Gas Re−Heat add MotorMaster Controller.2 Where available.
Specifications subject to change without notice. 27513 21 3607 00
APPLICATION DATAMin operating ambient temp (cooling):
In mechanical cooling mode, your ICP rooftop cansafely operate down to an outdoor ambienttemperature of 40�F (4�C) and 25�F (−4�C), with anaccessory winter start kit. It is possible to providecooling at lower outdoor ambient temperatures byusing less outside air, economizers, and/or accessorylow ambient kits.
Max operating ambient temp (cooling):
The maximum operating ambient temperature forcooling mode is 115�F (46�C). While cooling operationabove 115�F (46�C) may be possible, it could causeeither a reduction in performance, reliability, or aprotective action by the unit’s internal safety devices.
Min and max airflow (cooling mode):
To maintain safe and reliable operation of your rooftop,operate within the cooling airflow limits. Operatingabove the max may cause blow−off, undesired airflownoise, or airflow related problems with the rooftop unit.Operating below the min may cause problems with coilfreeze−up.
Airflow:
All units are draw−through in cooling mode.
Outdoor air application strategies:
Economizers reduce operating expenses andcompressor run time by providing a free source ofcooling and a means of ventilation to matchapplication changing needs. In fact, they should beconsidered for most applications. Also, consider thevarious economizer control methods and theirbenefits, as well as sensors required to accomplishyour application goals. Please contact your local ICPrepresentative for assistance.
Motor limits, Brake horsepower (BHP):
Due to ICP’s internal unit design, air path, andspecially designed motors, the full horsepower(maximum continuous BHP) band, as listed in thePhysical Data tables, can be used with the utmostconfidence. There is no need for extra safety factors,as ICP’s motors are designed and rigorously tested touse the entire, listed BHP range without eithernuisance tripping or premature motor failure.
Sizing a rooftop
Bigger isn’t necessarily better. While an air conditionerneeds to have enough capacity to meet the load, itdoesn’t need excess capacity. In fact, having excesscapacity typically results in very poor part loadperformance and humidity control.
Using higher design temperatures than ASHRAErecommends for your location, adding “safety factors”to the calculated load, and rounding up to the nextlargest unit, are all signs of oversizing air conditioners.Oversizing can cause short−cycling, and short cyclingleads to poor humidity control, reduced efficiency,higher utility bills, drastic indoor temperature swings,excessive noise, and increased wear and tear on theair conditioner.
Rather than oversizing an air conditioner, wisecontractors and engineers “right−size” or even slightlyundersize air conditioners. Correctly sizing an airconditioner controls humidity better; promotesefficiency; reduces utility bills; extends equipment life,and maintains even, comfortable temperatures.
Low ambient applications
When equipped with a ICP economizer, your rooftopunit can cool your space by bringing in fresh, cooloutside air. In fact, when so equipped, accessory lowambient kit may not be necessary. In low ambientconditions, unless the outdoor air is excessively humidor contaminated, economizer−based “free cooling” isthe preferred less costly and energy consciousmethod.
In low ambient applications where outside air mightnot be desired (such as contaminated or excessivelyhumid outdoor environments), your ICP rooftop canoperate at ambient temperatures down to −20�F(−29�C) using the recommended accessoryMotormaster low ambient controller.
Winter start
ICP’s winter start kit extends the low ambient limit ofyour rooftop to 25�F (−4�C). The kit bypasses the lowpressure switch, preventing nuisance tripping of thelow pressure switch. Other low ambient precautionsmay still be prudent.
Specifications subject to change without notice.28 513 21 3607 00
APPLICATION DATA (cont.)
2−Speed Indoor Fan Motor with VariableFrequency Drive (VFD)ICP’s 2−speed indoor fan motor system utilizes aVariable Frequency Drive (VFD) to automaticallyadjust the indoor fan motor speed in sequence withthe units cooling operation. Per ASHRAE 90.1standard section 6.4.3.10.b, during the first stage ofcooling operation the VFD will adjust the fan motor toprovide 2/3rd of the total cfm established for the unit.When a call for the second stage of cooling isrequired, the VFD will allow the total cfm for the unitestablished (100%). During the heating mode, theVFD will allow total design cfm (100%) operation andduring the ventilation mode the VFD will allowoperation to 2/3rd of total cfm.
The VFD used in ICP’s 2−speed indoor fan motorsystem has soft start capabilities to slowly ramp up thespeeds, thus eliminating any high inrush air volumeduring initial start−up. It also has internal over currentprotection for the fan motor and a field installed displaykit that allows adjustment and in depth diagnostics ofthe VFD.
This 2−speed indoor fan motor system is available onmodels with 2−stage cooling operation with electricalmechanical (multi Protocol) controls. Both spacesensor and conventional thermostats/controls can beused to provide accurate control in any application.
The 2−speed indoor fan motor system is very flexiblefor initial fan performance set up and adjustment. Thestandard factory shipped VFD is pre programmed toautomatically stage the fan speed between the firstand second stage of cooling. The unit fan performancestatic pressure and cfm can be easily adjusted usingthe traditional means of pulley adjustments. The othermeans to adjust the unit static and cfm performance isto utilize the field installed display module and adjustthe frequency and voltage in the VFD to requiredperformance requirements. In either case, once set upthe VFD will automatically adjust the speed betweenthe cooling stage operation.
RAS − 2−Speed Indoor Fan Motor − Variable Frequency Drive (VFD) HP RatingUnit Size VOLTAGE STATIC OPTION VFD HP RATING
090
208/230, 460, 575 STD 3208/230, 460 MED 3
575 MED 5208/230, 460, 575 HIGH 7.5
102
208/230, 460, 575 STD 3208/230, 460, 575 MED 3208/230, 460, 575 HIGH 5
120
208/230, 460, 575 STD 3208/230, 460, 575 MED 5208/230, 460, 575 HIGH 7.5
150
208/230, 460 STD 3575 STD 5
208/230, 460, 575 MED 5208/230, 460, 575 HIGH 7.5
180
208/230. 460 STD 3575 STD 5
208/230, 460, 575 MED 5208/230, 460, 575 HIGH 7.5
Specifications subject to change without notice. 29513 21 3607 00
SELECTION PROCEDURE (WITH RAS072 EXAMPLE)I. Determine cooling and heating loads.
Given:Mixed Air Drybulb 80�F (27�C)Mixed Air Wetbulb 67�F (19�C)Ambient Drybulb 95�F (35�C)TCLoad 69.0 MBHSHCLoad 51.0 MBHVertical Supply Air 2100 CFMExternal Static Pressure 0.66 in.wgElectrical Characteristics 230−3−60
II. Make an initial guess at cooling tons.Refrig. tons = TCLoad / 12 MBH per tonRefrig. tons = 69.0 / 12 = 5.75 tons
In this case, start by looking at the RAS072.
III. Look up the rooftop’s TC and SHC.Table 6 shows that, at the application’s supply airCFM, mixed air and ambient temperatures, theRAS072 supplies:TCLoad = 73.7 MBHSHCLoad = 54.4 MBH.
IV. Calculate the building Latent Heat Load.LCLoad = TCLoad − SHCLoadLCLoad = 69.0 MBH − 51.0 MBH = 18.0 MBH
V. Calculate RTU Latent Heat CapacityLC = TC − SHCLC = 73.7 MBH − 54.4 MBH = 19.3 MBH
VI. Compare RTU capacities to loads. 2,3
Compare the rooftop’s SHC and LC to the build-ing’s Sensible and Latent Heat Loads.
VII. Select factory options (FIOP)Local code requires an economizer for any unitwith TC larger than 65.0 MBH.
VIII. Calculate the total static pressure.External static pressure 0.66 in. wgSum of FIOP/Accessory static +0.14 in. wg
Total Static Pressure 0.80 in. wg
IX. Look up the Indoor Fan RPM & BHP.Table 8 shows, at 2100 CFM & ESP= 0.8,RPM = 1268 & BHP = 1.52
X. Determine electrical requirementsThe MCA and MOCP tables show a RAS072(without convenience outlet) as:
MCA = 30.5 amps & MOCP = 45 ampsMin. Disconnect Size: FLA = 30 & LRA = 157.
Legend:BHP — Brake horsepowerFLA — Full load ampsLC — Latent capacityLRA — Lock rotor ampMBH — (1,000) BTUHMCA — Min. circuit ampacityMOCP — Max. over−current protectionRPM — Revolutions per minuteRTU — Rooftop unitSHC — Sensible heat capacityTC — Total capacity
NOTES: 1. Selection software by ICP saves time by performing many of the
steps above. Contact your ICP sales representative forassistance.
2. Selecting a unit with a SHC slightly lower than the SHCLoad isoften better than oversizing. Slightly lower SHC’s will help controlindoor humidity, and prevent temperature swings.
3. If the rooftop’s capacity meets the Sensible Heat Load, but notthe Latent Heat Load.
4. Indoor Fan Motor efficiency is available in Table 10. Use thedecimal form in the equation eg. 80% =.8.
Specifications subject to change without notice.30 513 21 3607 00
Table 6 – COOLING CAPACITIES SINGLE STAGE COOLING 3 TONS
RAS036(RTPF)
Ambient Temperature85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
900 C
fm
EA
T (
wb
)
58TC 28.1 28.1 31.7 26.3 26.3 29.8 24.5 24.5 27.7 22.6 22.6 25.5
SHC 24.4 28.1 31.7 22.9 26.3 29.8 21.3 24.5 27.7 19.6 22.6 25.5
62TC 30.3 30.3 31.0 27.8 27.8 29.8 25.1 25.1 28.4 22.6 22.6 26.5
SHC 22.6 26.8 31.0 21.5 25.7 29.8 20.2 24.3 28.4 18.7 22.6 26.5
67TC 35.5 35.5 35.5 33.1 33.1 33.1 30.5 30.5 30.5 27.5 27.5 27.5
SHC 19.5 23.7 27.9 18.5 22.7 26.9 17.4 21.6 25.8 16.2 20.4 24.6
72TC 39.0 39.0 39.0 37.1 37.1 37.1 35.1 35.1 35.1 32.7 32.7 32.7
SHC 15.3 19.5 23.7 14.5 18.8 23.0 13.7 17.9 22.2 12.9 17.1 21.3
76TC − 41.4 41.4 − 39.6 39.6 − 37.6 37.6 − 35.4 35.4
SHC − 16.0 21.0 − 15.4 20.2 − 14.6 19.3 − 13.8 18.3
1050 C
fm
EA
T (
wb
)
58TC 30.2 30.2 34.2 28.4 28.4 32.2 26.5 26.5 30.0 24.5 24.5 27.7
SHC 26.3 30.2 34.2 24.7 28.4 32.2 23.1 26.5 30.0 21.3 24.5 27.7
62TC 31.9 31.9 34.2 29.4 29.4 32.8 26.7 26.7 31.2 24.5 24.5 28.8
SHC 24.6 29.4 34.2 23.4 28.1 32.8 22.0 26.6 31.2 20.3 24.5 28.8
67TC 36.7 36.7 36.7 34.8 34.8 34.8 32.2 32.2 32.2 29.1 29.1 29.1
SHC 20.6 25.4 30.2 19.8 24.6 29.4 18.8 23.6 28.4 17.6 22.4 27.2
72TC 40.1 40.1 40.1 38.2 38.2 38.2 36.1 36.1 36.1 33.7 33.7 33.7
SHC 15.7 20.5 25.3 15.0 19.8 24.6 14.2 19.0 23.8 13.4 18.2 23.0
76TC − 42.4 42.4 − 40.6 40.6 − 38.5 38.5 − 36.2 36.2
SHC − 16.6 22.2 − 15.9 21.3 − 15.2 20.4 − 14.4 19.5
1200 C
fm
EA
T (
wb
)
58TC 32.2 32.2 36.4 30.4 30.4 34.3 28.4 28.4 32.1 26.3 26.3 29.7
SHC 28.0 32.2 36.4 26.4 30.4 34.3 24.7 28.4 32.1 22.8 26.3 29.7
62TC 33.3 33.3 37.0 30.8 30.8 35.5 28.4 28.4 33.4 26.3 26.3 30.9
SHC 26.4 31.7 37.0 25.1 30.3 35.5 23.4 28.4 33.4 21.7 26.3 30.9
67TC 37.7 37.7 37.7 35.6 35.6 35.6 33.4 33.4 33.4 30.4 30.4 30.4
SHC 21.7 27.0 32.4 20.9 26.3 31.6 20.0 25.4 30.8 18.8 24.2 29.6
72TC 40.9 40.9 40.9 39.0 39.0 39.0 36.9 36.9 36.9 34.4 34.4 34.4
SHC 16.1 21.5 26.8 15.4 20.8 26.1 14.7 20.0 25.4 13.8 19.2 24.5
76TC − 43.1 43.1 − 41.3 41.3 − 39.1 39.1 − 36.8 36.8
SHC − 17.1 23.1 − 16.4 22.3 − 15.7 21.4 − 14.9 20.5
1350 C
fm
EA
T (
wb
)
58TC − − − 32.1 32.1 36.3 30.0 30.0 34.0 27.9 27.9 31.5
SHC − − − 27.9 32.1 36.3 26.1 30.0 34.0 24.2 27.9 31.5
62TC 28.4 28.4 30.5 32.2 32.2 37.8 30.1 30.1 35.3 27.9 27.9 32.8
SHC 17.6 24.1 30.5 26.6 32.2 37.8 24.8 30.1 35.3 23.0 27.9 32.8
67TC 33.2 33.2 33.2 36.4 36.4 36.4 34.1 34.1 34.1 31.5 31.5 32.0
SHC 15.0 21.4 27.9 21.9 27.8 33.7 21.0 26.9 32.9 20.0 26.0 32.0
72TC 37.5 37.5 37.5 39.7 39.7 39.7 37.5 37.5 37.5 35.0 35.0 35.0
SHC 11.8 18.3 24.8 15.8 21.7 27.5 15.0 20.9 26.8 14.2 20.1 26.0
76TC − 40.1 40.1 − 41.8 41.8 − 39.6 39.6 − 37.3 37.3
SHC − 15.3 22.7 − 16.8 23.2 − 16.1 22.3 − 15.3 21.5
1500 C
fm
EA
T (
wb
)
58TC 28.1 28.1 34.2 33.7 33.7 38.1 31.6 31.6 35.7 29.3 29.3 33.2
SHC 21.9 28.1 34.2 29.3 33.7 38.1 27.4 31.6 35.7 25.5 29.3 33.2
62TC 30.3 30.3 33.8 33.7 33.7 39.6 31.6 31.6 37.1 29.4 29.4 34.5
SHC 19.8 26.8 33.8 27.8 33.7 39.6 26.1 31.6 37.1 24.2 29.4 34.5
67TC 35.5 35.5 35.5 36.9 36.9 36.9 34.6 34.6 34.9 32.0 32.0 34.0
SHC 16.7 23.7 30.7 22.8 29.2 35.7 21.9 28.4 34.9 21.0 27.5 34.0
72TC 39.0 39.0 39.0 40.2 40.2 40.2 38.0 38.0 38.0 35.5 35.5 35.5
SHC 12.4 19.5 26.6 16.1 22.5 28.8 15.4 21.7 28.1 14.6 21.0 27.4
76TC − 41.4 41.4 − 42.2 42.2 − 40.0 40.0 − − −
SHC − 16.0 24.3 − 17.2 24.0 − 16.5 23.2 − − −
LEGEND:− − Do not operateCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice. 31513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 3 TONS
RAS036 (3 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
80 dry bulb 80 dry bulb 80 dry bulb72 wet bulb 67 wet bulb 62 wet bulb
900 1200 1500 900 1200 1500 900 1200 1500
75
TC 40.6 43.2 45.3 37.0 39.4 41.3 33.4 35.6 37.4SHC 21.6 23.9 25.6 25.6 27.7 29.3 29.6 31.6 33.1kW 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
85
TC 37.0 39.6 41.7 33.6 36.0 37.9 30.2 32.3 34.1SHC 17.7 20.2 22.2 22.7 25.0 26.9 27.7 29.9 31.6kW 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
95
TC 33.5 36.0 38.1 30.2 32.5 34.4 26.9 29.1 30.8SHC 13.7 16.6 18.8 19.7 22.4 24.4 25.7 28.2 30.1kW 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.5 2.5
105
TC 29.9 32.4 34.5 26.8 29.1 31.0 23.6 25.8 27.5SHC 9.8 12.9 15.3 16.8 19.7 22.0 23.8 26.5 28.6kW 2.9 2.9 2.9 2.8 2.8 2.8 2.8 2.8 2.8
115
TC 26.3 28.8 30.9 23.3 25.7 27.5 20.4 22.5 24.2SHC 5.8 9.2 11.9 13.8 17.0 19.5 21.9 24.8 27.1
kW 3.2 3.2 3.2 3.1 3.1 3.1 3.1 3.1 3.1
RAS036 (3 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
75 dry bulb 75 dry bulb 75 dry bulb62.5 wet bulb (50% relative) 64 wet bulb (55% relative) 65.3 wet bulb (60% relative)
1050 1200 1350 1050 1200 1350 1050 1200 1350
80
TC 14.7 15.5 16.2 15.9 16.7 17.4 16.9 17.7 18.4SHC 6.7 7.6 8.5 4.8 5.7 6.6 3.2 4.1 5.0kW 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
75
TC 15.1 15.8 16.4 16.2 17.0 17.6 17.2 18.0 18.6SHC 7.5 8.4 9.2 5.8 6.7 7.5 4.4 5.2 6.0kW 1.9 1.9 1.9 2.0 2.0 2.0 2.0 2.0 2.0
70
TC 15.5 16.1 16.7 16.6 17.3 17.9 17.5 18.2 18.8SHC 8.4 9.3 10.0 6.9 7.7 8.5 5.5 6.4 7.1kW 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
60
TC 16.2 16.8 17.3 17.2 17.8 18.3 18.1 18.7 19.2SHC 10.2 10.9 11.6 8.9 9.7 10.4 7.8 8.6 9.3kW 1.8 1.8 1.8 1.8 1.8 1.8 1.9 1.9 1.9
50
TC 17.0 17.5 17.9 17.9 18.4 18.8 18.7 19.2 19.6SHC 11.9 12.6 13.2 11.0 11.6 12.2 10.1 10.8 11.4kW 1.7 1.7 1.7 1.8 1.8 1.8 1.8 1.8 1.8
40
TC 17.7 18.1 18.5 18.6 19.0 19.3 19.3 19.7 20.1SHC 13.7 14.3 14.8 13.0 13.6 14.1 12.4 13.0 13.5
kW 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
NOTES: 1. Direct interpolation is permissible. Do not extrapolate.2. The following formulas may be used:
tldb = tedb –sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet−bulb temperature corresponding to enthalpy of airleaving evaporator coil (hlwb)
hlwb = hewb –total capacity (Btuh)
4.5 x cfm Where: hewb = Enthalpy of air entering evaporator coil
Specifications subject to change without notice.32 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 4 TONS
RAS048(RTPF)
Ambient Temperature85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
1200 C
fm
EA
T (
wb
)
58TC − − − − − − 36.1 36.1 40.7 34.3 34.3 38.6
SHC − − − − − − 31.5 36.1 40.7 29.9 34.3 38.6
62TC 43.1 43.1 43.1 40.8 40.8 40.8 38.4 38.4 39.4 35.9 35.9 38.2
SHC 31.2 36.4 41.7 30.1 35.3 40.6 28.9 34.1 39.4 27.8 33.0 38.2
67TC 47.4 47.4 47.4 45.2 45.2 45.2 42.9 42.9 42.9 40.3 40.3 40.3
SHC 25.9 31.2 36.4 25.0 30.2 35.5 23.9 29.2 34.4 22.9 28.2 33.4
72TC 51.1 51.1 51.1 49.1 49.1 49.1 46.8 46.8 46.8 43.9 43.9 43.9
SHC 20.1 25.5 30.9 19.4 24.7 30.1 18.4 23.7 29.0 17.4 22.7 28.0
76TC − 53.3 53.3 − 51.5 51.5 − 49.2 49.2 − 45.9 45.9
SHC − 20.8 27.4 − 20.2 26.8 − 19.3 25.7 − 18.3 24.6
1400 c
fm
EA
T (
wb
)
58TC 41.9 41.9 47.3 40.1 40.1 45.3 38.2 38.2 43.2 36.3 36.3 41.0
SHC 36.6 41.9 47.3 35.0 40.1 45.3 33.3 38.2 43.2 31.7 36.3 41.0
62TC 44.6 44.6 45.4 42.3 42.3 44.2 39.8 39.8 42.9 37.3 37.3 41.6
SHC 33.4 39.4 45.4 32.3 38.3 44.2 31.0 37.0 42.9 29.8 35.7 41.6
67TC 48.7 48.7 48.7 46.6 46.6 46.6 44.2 44.2 44.2 41.4 41.4 41.4
SHC 27.3 33.2 39.2 26.4 32.3 38.3 25.3 31.3 37.3 24.2 30.2 36.2
72TC 52.2 52.2 52.2 50.3 50.3 50.3 47.8 47.8 47.8 44.8 44.8 44.8
SHC 20.6 26.7 32.7 19.9 25.9 32.0 18.9 24.9 30.9 17.9 23.8 29.7
76TC − 54.1 54.1 − 52.3 52.3 − 49.9 49.9 − 46.4 46.4
SHC − 21.5 29.0 − 20.8 28.0 − 19.9 26.9 − 18.8 25.7
1600 C
fm
EA
T (
wb
)
58TC 44.0 44.0 49.6 42.1 42.1 47.4 40.1 40.1 45.2 38.1 38.1 43.0
SHC 38.3 44.0 49.6 36.7 42.1 47.4 34.9 40.1 45.2 33.2 38.1 43.0
62TC 45.7 45.7 48.6 43.5 43.5 47.5 41.0 41.0 46.0 38.5 38.5 44.4
SHC 35.3 42.0 48.6 34.2 40.8 47.5 32.9 39.4 46.0 31.6 38.0 44.4
67TC 49.8 49.8 49.8 47.6 47.6 47.6 45.1 45.1 45.1 42.3 42.3 42.3
SHC 28.4 35.0 41.6 27.6 34.2 40.9 26.5 33.2 39.9 25.4 32.1 38.7
72TC 53.0 53.0 53.0 51.1 51.1 51.1 48.6 48.6 48.6 45.4 45.4 45.4
SHC 21.0 27.6 34.3 20.3 27.0 33.6 19.4 26.0 32.6 18.3 24.8 31.3
76TC − 54.6 54.6 − 52.8 52.8 − 50.4 50.4 − 46.8 46.8
SHC − 22.0 29.9 − 21.3 29.0 − 20.3 27.9 − 19.2 26.6
1800 C
fm
EA
T (
wb
)
58TC 44.0 44.0 50.3 42.1 42.1 48.1 40.1 40.1 45.9 38.0 38.0 43.5
SHC 37.6 44.0 50.3 36.0 42.1 48.1 34.3 40.1 45.9 32.6 38.0 43.5
62TC 45.7 45.7 49.5 43.5 43.5 48.3 41.0 41.0 46.8 38.4 38.4 45.2
SHC 34.5 42.0 49.5 33.4 40.8 48.3 32.1 39.4 46.8 30.8 38.0 45.2
67TC 49.8 49.8 49.8 47.6 47.6 47.6 45.1 45.1 45.1 42.3 42.3 42.3
SHC 27.6 35.0 42.5 26.8 34.2 41.7 25.7 33.2 40.7 24.6 32.1 39.5
72TC 53.0 53.0 53.0 51.1 51.1 51.1 48.6 48.6 48.6 45.4 45.4 45.4
SHC 20.2 27.6 35.1 19.5 27.0 34.4 18.5 26.0 33.4 17.5 24.8 32.1
76TC − 54.6 54.6 − 52.8 52.8 − 50.4 50.4 − 46.8 46.8
SHC − 22.0 30.9 − 21.3 30.0 − 20.3 28.9 − 19.2 27.5
2000 C
fm
EA
T (
wb
)
58TC 46.9 46.9 52.9 45.0 45.0 50.8 42.9 42.9 48.4 40.7 40.7 45.9
SHC 40.9 46.9 52.9 39.3 45.0 50.8 37.4 42.9 48.4 35.5 40.7 45.9
62TC 47.5 47.5 54.0 45.3 45.3 52.5 43.0 43.0 50.3 40.7 40.7 47.7
SHC 38.5 46.3 54.0 37.3 44.9 52.5 35.6 43.0 50.3 33.8 40.7 47.7
67TC 51.2 51.2 51.2 49.1 49.1 49.1 46.5 46.5 46.5 43.5 43.5 43.5
SHC 30.5 38.3 46.0 29.8 37.6 45.5 28.7 36.6 44.5 27.5 35.4 43.2
72TC 54.0 54.0 54.0 52.1 52.1 52.1 49.7 49.7 49.7 46.2 46.2 46.2
SHC 21.7 29.2 36.8 21.1 28.7 36.4 20.1 27.8 35.4 18.9 26.4 33.9
76TC − 55.2 55.2 − 53.5 53.5 − 51.0 51.0 − 47.3 47.3
SHC − 22.7 31.4 − 22.0 30.6 − 21.1 29.6 − 19.9 28.1
LEGEND:− − Do not operateCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice. 33513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 4 TONS
RAS048 (4 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
80 dry bulb 80 dry bulb 80 dry bulb72 wet bulb 67 wet bulb 62 wet bulb
1200 1600 2000 1200 1600 2000 1200 1600 2000
75
TC 52.5 55.9 58.6 47.1 50.2 52.7 41.7 44.5 46.8SHC 22.6 25.5 27.8 27.1 29.9 32.0 31.6 34.2 36.2kW 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
85
TC 48.7 52.2 54.9 43.4 46.5 49.0 38.0 40.8 43.1SHC 18.0 21.3 23.9 23.6 26.8 29.2 29.3 32.2 34.4kW 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
95
TC 44.9 48.4 51.2 39.6 42.8 45.3 34.3 37.1 39.4SHC 13.4 17.2 20.0 20.2 23.7 26.4 27.0 30.2 32.7kW 3.4 3.4 3.4 3.3 3.3 3.3 3.3 3.3 3.3
105
TC 41.1 44.7 47.5 35.9 39.1 41.7 30.6 33.5 35.8SHC 8.8 13.0 16.1 16.7 20.6 23.6 24.6 28.2 31.0kW 3.8 3.8 3.8 3.7 3.7 3.7 3.7 3.7 3.7
115
TC 37.4 41.0 43.9 32.1 35.4 38.0 26.8 29.8 32.1SHC 4.3 8.8 12.2 13.3 17.5 20.7 22.3 26.2 29.2
kW 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.1 4.1
RAS048 (4 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
75 dry bulb 75 dry bulb 75 dry bulb62.5 wet bulb (50% relative) 64 wet bulb (55% relative) 65.3 wet bulb (60% relative)
1200 1600 2000 1200 1600 2000 1200 1600 2000
80
TC 11.6 13.8 15.5 13.5 15.8 17.6 15.2 17.5 19.3SHC −1.0 1.2 3.0 −3.1 −0.8 0.9 −4.8 −2.6 −0.9kW 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
75
TC 12.5 14.6 16.2 14.3 16.4 18.1 15.9 18.1 19.8SHC −0.7 1.4 3.0 −2.7 −0.6 1.1 −4.3 −2.2 −0.6kW 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
70
TC 13.4 15.3 16.8 15.1 17.1 18.7 16.6 18.7 20.3SHC −0.5 1.5 3.0 −2.3 −0.3 1.2 −3.8 −1.9 −0.3kW 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
60
TC 15.1 16.8 18.1 16.7 18.4 19.8 18.1 19.9 21.2SHC 0.0 1.7 3.1 −1.5 0.2 1.5 −2.8 −1.1 0.2kW 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6
50
TC 16.9 18.3 19.4 18.3 19.8 20.9 19.6 21.0 22.2SHC 0.6 2.0 3.1 −0.7 0.7 1.8 −1.8 −0.4 0.7kW 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6
40
TC 18.7 19.8 20.7 19.9 21.1 22.0 21.0 22.2 23.2SHC 1.1 2.2 3.1 0.1 1.2 2.1 −0.8 0.4 1.3
kW 2.6 2.6 2.6 2.7 2.7 2.7 2.7 2.7 2.7
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
NOTES: 1. Direct interpolation is permissible. Do not extrapolate.2. The following formulas may be used:
tldb = tedb –sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet−bulb temperature corresponding to enthalpy of airleaving evaporator coil (hlwb)
hlwb = hewb –total capacity (Btuh)
4.5 x cfm Where: hewb = Enthalpy of air entering evaporator coil
Specifications subject to change without notice.34 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 5 TONS
RAS060(RTPF)
Ambient Temperature85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
1500 C
fm
EA
T (
wb
)
58TC 52.9 52.9 60.0 49.9 49.9 56.6 46.6 46.6 52.9 43.1 43.1 48.9
SHC 45.8 52.9 60.0 43.2 49.9 56.6 40.4 46.6 52.9 37.3 43.1 48.9
62TC 56.2 56.2 57.6 52.2 52.2 55.7 47.8 47.8 53.5 43.2 43.2 51.0
SHC 41.8 49.7 57.6 39.9 47.8 55.7 37.8 45.6 53.5 35.5 43.2 51.0
67TC 62.4 62.4 62.4 58.8 58.8 58.8 54.4 54.4 54.4 49.5 49.5 49.5
SHC 34.8 42.8 50.7 33.2 41.2 49.1 31.4 39.3 47.3 29.4 37.3 45.3
72TC 68.2 68.2 68.2 64.8 64.8 64.8 60.8 60.8 60.8 56.2 56.2 56.2
SHC 27.2 35.2 43.2 25.9 33.9 41.9 24.4 32.4 40.4 22.6 30.6 38.6
76TC − 71.1 71.1 − 69.0 69.0 − 65.4 65.4 − 60.9 60.9
SHC − 28.4 36.6 − 27.6 35.9 − 26.3 34.6 − 24.8 33.0
1750 C
fm
EA
T (
wb
)
58TC 56.5 56.5 64.0 53.3 53.3 60.4 49.8 49.8 56.5 46.1 46.1 52.3
SHC 48.9 56.5 64.0 46.1 53.3 60.4 43.1 49.8 56.5 39.9 46.1 52.3
62TC 58.5 58.5 63.4 54.4 54.4 61.3 49.9 49.9 58.9 46.1 46.1 54.4
SHC 45.2 54.3 63.4 43.2 52.2 61.3 41.0 49.9 58.9 37.9 46.1 54.4
67TC 64.3 64.3 64.3 60.5 60.5 60.5 56.2 56.2 56.2 51.3 51.3 51.3
SHC 36.9 46.1 55.2 35.3 44.5 53.7 33.6 42.8 51.9 31.6 40.8 49.9
72TC 69.5 69.5 69.5 66.5 66.5 66.5 62.4 62.4 62.4 57.7 57.7 57.7
SHC 27.8 36.9 45.9 26.7 35.9 45.1 25.2 34.5 43.7 23.5 32.8 42.0
76TC − 72.2 72.2 − 70.1 70.1 − 66.6 66.6 − − −
SHC − 29.3 38.9 − 28.6 38.2 − 27.4 36.8 − − −
2000 C
fm
EA
T (
wb
)
58TC 59.3 59.3 67.3 56.1 56.1 63.6 52.5 52.5 59.5 48.6 48.6 55.1
SHC 51.4 59.3 67.3 48.6 56.1 63.6 45.4 52.5 59.5 42.1 48.6 55.1
62TC 60.1 60.1 68.5 56.2 56.2 66.3 52.5 52.5 62.0 48.7 48.7 57.4
SHC 48.1 58.3 68.5 46.2 56.2 66.3 43.1 52.5 62.0 39.9 48.7 57.4
67TC 65.7 65.7 65.7 61.9 61.9 61.9 57.5 57.5 57.5 52.6 52.6 54.4
SHC 38.8 49.1 59.5 37.3 47.7 58.1 35.6 46.0 56.4 33.6 44.0 54.4
72TC 70.1 70.1 70.1 67.6 67.6 67.6 63.6 63.6 63.6 58.9 58.9 58.9
SHC 28.3 38.1 48.0 27.4 37.7 48.0 26.0 36.4 46.7 24.3 34.7 45.2
76TC − 72.9 72.9 − 70.8 70.8 − 67.4 67.4 − − −
SHC − 30.1 40.7 − 29.3 39.9 − 28.2 38.7 − − −
2250 C
fm
EA
T (
wb
)
58TC 61.5 61.5 69.8 58.4 58.4 66.2 54.8 54.8 62.1 50.8 50.8 57.6
SHC 53.2 61.5 69.8 50.5 58.4 66.2 47.4 54.8 62.1 43.9 50.8 57.6
62TC 61.6 61.6 72.6 58.4 58.4 68.9 54.8 54.8 64.6 50.8 50.8 59.9
SHC 50.6 61.6 72.6 47.9 58.4 68.9 45.0 54.8 64.6 41.7 50.8 59.9
67TC 66.8 66.8 66.8 63.0 63.0 63.0 58.5 58.5 60.6 53.6 53.6 58.6
SHC 40.5 52.0 63.4 39.1 50.7 62.3 37.4 49.0 60.6 35.5 47.0 58.6
72TC 70.8 70.8 70.8 68.5 68.5 68.5 64.5 64.5 64.5 59.8 59.8 59.8
SHC 28.7 39.5 50.2 28.0 39.3 50.5 26.7 38.1 49.6 25.0 36.6 48.1
76TC − 73.4 73.4 − 71.2 71.2 − 67.9 67.9 − − −
SHC − 30.7 42.1 − 30.0 41.4 − 28.9 40.4 − − −
2500 C
fm
EA
T (
wb
)
58TC 63.3 63.3 71.8 60.1 60.1 68.2 56.5 56.5 64.1 52.6 52.6 59.6
SHC 54.8 63.3 71.8 52.1 60.1 68.2 49.0 56.5 64.1 45.5 52.6 59.6
62TC 63.4 63.4 74.7 60.2 60.2 71.0 56.6 56.6 66.7 52.6 52.6 62.1
SHC 52.0 63.4 74.7 49.4 60.2 71.0 46.5 56.6 66.7 43.2 52.6 62.1
67TC 67.6 67.6 67.6 63.8 63.8 66.2 59.3 59.3 64.6 54.4 54.4 62.5
SHC 42.1 54.6 67.1 40.9 53.5 66.2 39.2 51.9 64.6 37.2 49.8 62.5
72TC 71.3 71.3 71.3 69.0 69.0 69.0 65.1 65.1 65.1 60.4 60.4 60.4
SHC 29.1 40.7 52.2 28.5 40.7 52.9 27.3 39.7 52.2 25.7 38.3 50.9
76TC − 73.8 73.8 − 71.4 71.4 − 68.3 68.3 − − −
SHC − 31.2 43.3 − 30.5 42.6 − 29.6 41.9 − − −
LEGEND:− − Do not operateCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice. 35513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 5 TONS
RAS060 (5 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
80 dry bulb 80 dry bulb 80 dry bulb72 wet bulb 67 wet bulb 62 wet bulb
1750 2000 2250 1750 2000 2250 1750 2000 2250
75
TC 73.1 78.7 84.5 63.2 66.9 70.8 53.2 55.1 57.1SHC 35.3 37.2 38.8 42.0 43.7 45.3 48.7 50.3 51.8kW 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
85
TC 67.6 71.2 75.0 59.1 61.2 63.3 50.6 51.1 51.5SHC 27.9 30.0 31.9 36.3 38.3 40.1 44.8 46.6 48.2kW 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
95
TC 62.1 63.8 65.5 55.1 55.4 55.8 48.0 47.0 46.0SHC 20.5 22.9 24.9 30.7 32.9 34.8 40.9 42.9 44.7kW 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3
105
TC 56.6 56.3 56.0 51.0 49.6 48.3 45.4 43.0 40.5SHC 13.1 15.7 18.0 25.0 27.5 29.6 36.9 39.2 41.2kW 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.7
115
TC 51.1 48.8 46.5 46.9 43.9 40.7 42.8 39.0 35.0SHC 5.8 8.6 11.0 19.4 22.0 24.4 33.0 35.5 37.7
kW 5.3 5.3 5.3 5.3 5.3 5.3 5.2 5.2 5.2
RAS060 (5 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
75 dry bulb 75 dry bulb 75 dry bulb62.5 wet bulb (50% relative) 64 wet bulb (55% relative) 65.3 wet bulb (60% relative)
1750 2000 2250 1750 2000 2250 1750 2000 2250
80
TC 23.0 24.4 25.6 24.7 26.2 27.4 26.3 27.7 29.0SHC 5.3 6.1 6.8 3.2 4.0 4.7 1.4 2.2 2.9kW 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
75
TC 23.3 24.6 25.7 25.0 26.3 27.5 26.4 27.8 29.0SHC 5.1 5.8 6.5 3.1 3.9 4.5 1.4 2.2 2.8kW 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
70
TC 23.5 24.8 25.9 25.2 26.4 27.5 26.6 27.9 29.0SHC 4.8 5.5 6.2 3.0 3.7 4.3 1.4 2.1 2.8kW 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
60
TC 24.1 25.2 26.1 25.6 26.7 27.7 26.9 28.0 29.0SHC 4.3 5.0 5.5 2.8 3.4 3.9 1.4 2.0 2.6kW 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
50
TC 24.7 25.6 26.4 26.1 27.0 27.8 27.2 28.2 29.0SHC 3.8 4.4 4.8 2.5 3.1 3.5 1.4 2.0 2.4kW 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
40
TC 25.3 26.0 26.7 26.5 27.3 27.9 27.6 28.3 29.0SHC 3.3 3.8 4.2 2.3 2.8 3.1 1.4 1.9 2.3
kW 3.1 3.1 3.1 3.2 3.2 3.2 3.2 3.2 3.2
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
NOTES: 1. Direct interpolation is permissible. Do not extrapolate.2. The following formulas may be used:
tldb = tedb –sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet−bulb temperature corresponding to enthalpy of airleaving evaporator coil (hlwb)
hlwb = hewb –total capacity (Btuh)
4.5 x cfm Where: hewb = Enthalpy of air entering evaporator coil
Specifications subject to change without notice.36 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 6 TONS
RAS072(RTPF)
Ambient Temperature85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
1800 C
fm
EA
T (
wb
)
58TC 64.9 64.9 73.3 62.1 62.1 70.0 58.9 58.9 66.4 55.6 55.6 62.7
SHC 56.6 64.9 73.3 54.1 62.1 70.0 51.4 58.9 66.4 48.5 55.6 62.7
62TC 68.7 68.7 70.3 64.9 64.9 68.5 60.8 60.8 66.4 56.4 56.4 64.0
SHC 51.7 61.0 70.3 49.9 59.2 68.5 47.9 57.2 66.4 45.7 54.9 64.0
67TC 75.6 75.6 75.6 71.7 71.7 71.7 67.4 67.4 67.4 62.5 62.5 62.5
SHC 42.8 52.2 61.5 41.2 50.5 59.8 39.3 48.6 58.0 37.2 46.5 55.8
72TC 82.6 82.6 82.6 78.5 78.5 78.5 73.7 73.7 73.7 67.8 67.8 67.8
SHC 33.5 42.8 52.2 31.9 41.3 50.6 30.0 39.3 48.6 27.8 36.9 45.9
76TC − 87.5 87.5 − 83.3 83.3 − 77.7 77.7 − 70.9 70.9
SHC − 35.0 44.9 − 33.5 43.4 − 31.6 41.5 − 29.3 39.1
2100 C
fm
EA
T (
wb
)
58TC 68.9 68.9 77.7 65.9 65.9 74.3 62.5 62.5 70.5 58.7 58.7 66.2
SHC 60.1 68.9 77.7 57.4 65.9 74.3 54.5 62.5 70.5 51.2 58.7 66.2
62TC 70.9 70.9 76.9 67.1 67.1 75.0 63.0 63.0 72.5 58.7 58.7 68.7
SHC 55.6 66.3 76.9 53.8 64.4 75.0 51.6 62.1 72.5 48.7 58.7 68.7
67TC 77.8 77.8 77.8 73.7 73.7 73.7 69.2 69.2 69.2 64.0 64.0 64.0
SHC 45.4 56.1 66.8 43.7 54.4 65.2 41.8 52.5 63.2 39.6 50.2 60.7
72TC 84.5 84.5 84.5 80.3 80.3 80.3 75.1 75.1 75.1 68.8 68.8 68.8
SHC 34.5 45.2 55.9 32.9 43.5 54.2 30.9 41.4 52.0 28.5 38.7 48.9
76TC − 89.2 89.2 − 84.7 84.7 − 78.8 78.8 − 71.6 71.6
SHC − 36.3 47.8 − 34.7 46.0 − 32.6 43.7 − 30.1 40.9
2400 C
fm
EA
T (
wb
)
58TC 72.0 72.0 81.2 68.7 68.7 77.5 65.2 65.2 73.5 61.1 61.1 68.9
SHC 62.8 72.0 81.2 60.0 68.7 77.5 56.9 65.2 73.5 53.3 61.1 68.9
62TC 72.8 72.8 82.8 68.9 68.9 80.7 65.2 65.2 76.4 61.2 61.2 71.6
SHC 59.1 71.0 82.8 57.2 68.9 80.7 54.1 65.2 76.4 50.7 61.2 71.6
67TC 79.4 79.4 79.4 75.2 75.2 75.2 70.5 70.5 70.5 65.1 65.1 65.3
SHC 47.7 59.8 71.8 46.0 58.1 70.2 44.0 56.0 68.1 41.6 53.5 65.3
72TC 86.0 86.0 86.0 81.6 81.6 81.6 76.1 76.1 76.1 69.6 69.6 69.6
SHC 35.3 47.2 59.2 33.7 45.6 57.5 31.7 43.3 55.0 29.1 40.3 51.4
76TC − 90.3 90.3 − 85.7 85.7 − 79.6 79.6 − 72.1 72.1
SHC − 37.3 49.8 − 35.6 48.0 − 33.5 45.6 − 30.8 42.5
2700 C
fm
EA
T (
wb
)
58TC 60.3 60.3 74.1 71.1 71.1 80.2 67.4 67.4 76.0 63.0 63.0 71.1
SHC 46.4 60.3 74.1 62.0 71.1 80.2 58.8 67.4 76.0 55.0 63.0 71.1
62TC 65.4 65.4 69.3 71.2 71.2 83.3 67.5 67.5 79.0 63.1 63.1 73.8
SHC 41.0 55.1 69.3 59.0 71.2 83.3 55.9 67.5 79.0 52.3 63.1 73.8
67TC 72.7 72.7 72.7 76.3 76.3 76.3 71.5 71.5 72.6 65.8 65.8 69.4
SHC 33.8 48.0 62.2 48.2 61.6 74.9 46.1 59.3 72.6 43.5 56.5 69.4
72TC 79.7 79.7 79.7 82.5 82.5 82.5 76.9 76.9 76.9 70.1 70.1 70.1
SHC 25.8 40.2 54.6 34.5 47.5 60.5 32.3 45.0 57.7 29.7 41.7 53.8
76TC − 85.1 85.1 − 86.4 86.4 − 80.2 80.2 − 72.5 72.5
SHC − 33.5 48.4 − 36.5 49.9 − 34.3 47.3 − 31.5 44.0
3000 C
fm
EA
T (
wb
)
58TC 64.9 64.9 78.8 73.1 73.1 82.5 69.2 69.2 78.0 64.5 64.5 72.7
SHC 51.1 64.9 78.8 63.8 73.1 82.5 60.3 69.2 78.0 56.2 64.5 72.7
62TC 68.7 68.7 76.5 73.2 73.2 85.7 69.2 69.2 81.0 64.5 64.5 75.5
SHC 45.5 61.0 76.5 60.7 73.2 85.7 57.4 69.2 81.0 53.5 64.5 75.5
67TC 75.6 75.6 75.6 77.2 77.2 79.4 72.2 72.2 76.8 66.3 66.3 73.0
SHC 36.6 52.2 67.7 50.2 64.8 79.4 48.0 62.4 76.8 45.1 59.1 73.0
72TC 82.6 82.6 82.6 83.3 83.3 83.3 77.5 77.5 77.5 70.5 70.5 70.5
SHC 27.2 42.8 58.5 35.1 49.2 63.3 32.9 46.6 60.3 30.2 43.0 55.9
76TC − 87.5 87.5 − 86.9 86.9 − 80.6 80.6 − 72.8 72.8
SHC − 35.0 51.5 − 37.3 51.6 − 35.0 48.9 − 32.1 45.3
LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice. 37513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 6 TONS
RAS072 (6 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
80 dry bulb 80 dry bulb 80 dry bulb72 wet bulb 67 wet bulb 62 wet bulb
2100 2400 2700 2100 2400 2700 2100 2400 2700
75
TC 86.7 89.9 92.8 79.3 82.3 84.9 71.9 74.6 77.0SHC 40.1 41.8 43.3 46.9 48.5 49.9 53.7 55.2 56.5kW 4.3 4.3 4.3 4.2 4.2 4.2 4.2 4.2 4.2
85
TC 79.5 82.6 85.4 72.5 75.3 77.9 65.4 68.0 70.3SHC 32.1 34.0 35.7 40.7 42.5 44.1 49.4 51.0 52.5kW 5.0 5.0 5.0 5.0 5.0 5.0 4.9 4.9 4.9
95
TC 72.4 75.3 78.1 65.6 68.3 70.8 58.8 61.3 63.6SHC 24.1 26.3 28.1 34.6 36.6 38.3 45.1 46.9 48.5kW 5.8 5.8 5.8 5.7 5.7 5.7 5.6 5.6 5.6
105
TC 65.2 68.1 70.7 58.7 61.4 63.8 52.3 54.7 56.8SHC 16.2 18.5 20.5 28.5 30.6 32.6 40.7 42.8 44.6kW 6.5 6.5 6.5 6.4 6.4 6.4 6.3 6.3 6.3
115
TC 58.0 60.8 63.3 51.9 54.4 56.7 45.7 48.0 50.1SHC 8.2 10.7 13.0 22.3 24.7 26.8 36.4 38.6 40.6
kW 7.2 7.2 7.2 7.1 7.1 7.1 7.0 7.0 7.0
RAS072 (6 TONS) − UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODEAir Entering Evaporator − CFM
Temp (F) Air EntCondenser (Edb)
75 dry bulb 75 dry bulb 75 dry bulb62.5 wet bulb (50% relative) 64 wet bulb (55% relative) 65.3 wet bulb (60% relative)
2100 2400 2700 2100 2400 2700 1750 2000 2700
80
TC 16.7 19.8 22.5 18.8 21.9 24.7 16.2 19.4 26.7SHC 0.6 0.6 0.6 −0.4 −0.4 −0.4 −1.3 −1.3 −1.3kW 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
75
TC 17.7 20.6 23.1 19.6 22.6 25.3 17.3 20.3 27.1SHC 0.6 0.6 0.6 −0.3 −0.3 −0.3 −1.2 −1.2 −1.2kW 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
70
TC 18.6 21.3 23.7 20.5 23.3 25.8 18.3 21.1 27.6SHC 0.7 0.7 0.7 −0.2 −0.2 −0.2 −1.0 −1.0 −1.0kW 4.0 4.0 4.0 4.1 4.1 4.1 4.1 4.1 4.1
60
TC 20.5 22.9 25.0 22.2 24.7 26.8 20.4 22.8 28.5SHC 0.7 0.7 0.7 −0.0 −0.0 −0.0 −0.7 −0.7 −0.7kW 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1
50
TC 22.4 24.4 26.2 24.0 26.0 27.9 22.4 24.5 29.3SHC 0.8 0.8 0.8 0.1 0.1 0.1 −0.4 −0.4 −0.4kW 4.1 4.1 4.1 4.1 4.1 4.1 4.2 4.2 4.2
40
TC 24.3 25.9 27.4 25.7 27.4 28.9 24.5 26.3 30.2SHC 0.8 0.8 0.8 0.3 0.3 0.3 −0.1 −0.1 −0.1
kW 4.1 4.1 4.1 4.2 4.2 4.2 4.2 4.2 4.2
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
NOTES: 1. Direct interpolation is permissible. Do not extrapolate.2. The following formulas may be used:
tldb = tedb –sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet−bulb temperature corresponding to enthalpy of airleaving evaporator coil (hlwb)
hlwb = hewb –total capacity (Btuh)
4.5 x cfm Where: hewb = Enthalpy of air entering evaporator coil
Specifications subject to change without notice.38 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 7.5 TONS
RAS091(RTPF)
AMBIENT TEMPERATURE85 95 105 115
EAT (db) EAT (db) EAT (db) EA (db)75 80 85 75 80 85 75 80 85 75 80 85
2250 C
fm
EA
T (
wb
)
58TC 81.2 81.2 91.8 77.5 77.5 87.7 73.6 73.6 83.3 69.5 69.5 78.7
SHC 70.5 81.2 91.8 67.3 77.5 87.7 63.9 73.6 83.3 60.4 69.5 78.7
62TC 86.9 86.9 86.9 82.3 82.3 84.0 77.2 77.2 81.5 71.9 71.9 78.8
SHC 63.6 74.9 86.2 61.4 72.7 84.0 58.9 70.2 81.5 56.3 67.6 78.8
67TC 95.2 95.2 95.2 90.7 90.7 90.7 85.7 85.7 85.7 79.9 79.9 79.9
SHC 52.8 64.2 75.6 50.9 62.2 73.6 48.8 60.1 71.5 46.3 57.6 68.9
72TC 103.5 103.5 103.5 98.9 98.9 98.9 93.8 93.8 93.8 87.3 87.3 87.3
SHC 41.5 53.1 64.6 39.7 51.2 62.7 37.7 49.2 60.6 35.3 46.6 57.8
76TC − 109.6 109.6 − 104.8 104.8 − 99.1 99.1 − 91.6 91.6
SHC − 43.7 56.0 − 42.0 54.3 − 40.0 52.4 − 37.4 49.8
2625 C
fm
EA
T (
wb
)
58TC 85.9 85.9 97.2 82.2 82.2 93.1 78.1 78.1 88.4 73.9 73.9 83.6
SHC 74.6 85.9 97.2 71.4 82.2 93.1 67.9 78.1 88.4 64.1 73.9 83.6
62TC 89.6 89.6 94.1 85.1 85.1 91.7 80.1 80.1 89.1 74.6 74.6 86.0
SHC 68.1 81.1 94.1 65.9 78.8 91.7 63.4 76.3 89.1 60.6 73.3 86.0
67TC 97.9 97.9 97.9 93.2 93.2 93.2 88.1 88.1 88.1 82.0 82.0 82.0
SHC 55.7 68.7 81.7 53.7 66.7 79.8 51.6 64.6 77.6 49.0 62.0 74.9
72TC 106.0 106.0 106.0 101.3 101.3 101.3 95.9 95.9 95.9 89.0 89.0 89.0
SHC 42.7 55.8 68.9 40.9 53.9 67.0 38.8 51.8 64.7 36.2 48.9 61.7
76TC − 111.8 111.8 − 106.9 106.9 − 100.7 100.7 − 92.7 92.7
SHC − 45.3 59.8 − 43.6 58.0 − 41.4 55.6 − 38.7 52.6
3000 C
fm
EA
T (
wb
)
58TC 89.6 89.6 101.4 85.9 85.9 97.2 81.7 81.7 92.5 77.0 77.0 87.1
SHC 77.9 89.6 101.4 74.6 85.9 97.2 71.0 81.7 92.5 66.9 77.0 87.1
62TC 91.8 91.8 101.1 87.2 87.2 98.6 82.3 82.3 95.5 77.1 77.1 90.6
SHC 72.2 86.7 101.1 69.9 84.3 98.6 67.2 81.3 95.5 63.5 77.1 90.6
67TC 99.9 99.9 99.9 95.2 95.2 95.2 89.9 89.9 89.9 83.6 83.6 83.6
SHC 58.3 72.9 87.5 56.4 71.0 85.5 54.2 68.8 83.4 51.6 66.1 80.5
72TC 107.9 107.9 107.9 103.0 103.0 103.0 97.3 97.3 97.3 90.1 90.1 90.1
SHC 43.7 58.3 72.8 41.9 56.4 70.9 39.7 54.1 68.4 37.0 51.0 65.0
76TC − 113.8 113.8 − 108.4 108.4 − 102.0 102.0 − 93.4 93.4
SHC − 46.7 62.5 − 44.8 60.4 − 42.6 57.9 − 39.6 54.7
3375 C
fm
EA
T (
wb
)
58TC 92.7 92.7 104.9 88.8 88.8 100.5 84.6 84.6 95.7 79.6 79.6 90.0
SHC 80.5 92.7 104.9 77.1 88.8 100.5 73.4 84.6 95.7 69.1 79.6 90.0
62TC 93.7 93.7 107.3 89.1 89.1 104.7 84.6 84.6 99.5 79.6 79.6 93.6
SHC 75.8 91.6 107.3 73.5 89.1 104.7 69.8 84.6 99.5 65.6 79.6 93.6
67TC 101.5 101.5 101.5 96.7 96.7 96.7 91.3 91.3 91.3 84.8 84.8 85.7
SHC 60.8 76.9 93.0 58.8 74.9 91.0 56.7 72.8 88.9 53.9 69.8 85.7
72TC 109.4 109.4 109.4 104.3 104.3 104.3 98.4 98.4 98.4 90.9 90.9 90.9
SHC 44.6 60.5 76.4 42.8 58.6 74.4 40.5 56.2 71.8 37.7 52.8 68.0
76TC − 115.1 115.1 − 109.5 109.5 − 102.8 102.8 − 94.0 94.0
SHC − 47.8 64.9 − 45.9 62.7 − 43.5 60.1 − 40.4 56.5
3750 C
fm
EA
T (
wb
)
58TC 95.3 95.3 107.8 91.3 91.3 103.3 86.9 86.9 98.3 81.7 81.7 92.4
SHC 82.7 95.3 107.8 79.3 91.3 103.3 75.5 86.9 98.3 70.9 81.7 92.4
62TC 95.5 95.5 112.2 91.3 91.3 107.4 87.0 87.0 102.2 81.7 81.7 96.0
SHC 78.7 95.5 112.2 75.3 91.3 107.4 71.7 87.0 102.2 67.4 81.7 96.0
67TC 102.8 102.8 102.8 97.9 97.9 97.9 92.3 92.3 94.0 85.7 85.7 90.5
SHC 63.1 80.6 98.2 61.2 78.7 96.3 59.0 76.5 94.0 56.0 73.2 90.5
72TC 110.6 110.6 110.6 105.4 105.4 105.4 99.2 99.2 99.2 91.5 91.5 91.5
SHC 45.5 62.7 79.9 43.5 60.7 77.8 41.3 58.1 75.0 38.3 54.5 70.7
76TC − 116.1 116.1 − 110.3 110.3 − 103.5 103.5 − 94.5 94.5
SHC − 48.9 67.0 − 46.8 64.8 − 44.4 62.0 − 41.1 58.1
LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice. 39513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 7.5 TONS
RAS090(RTPF)
AMBIENT TEMPERATURE85 95 105 115
EAT (db) EAT (db) EAT (db) EA (db)75 80 85 75 80 85 75 80 85 75 80 85
2250 C
fm
EA
T (
wb
)
58TC 77.4 77.4 87.8 73.8 73.8 83.8 70.1 70.1 79.5 66.0 66.0 74.9
SHC 66.9 77.4 87.8 63.9 73.8 83.8 60.6 70.1 79.5 57.1 66.0 74.9
62TC 82.2 82.2 83.9 77.5 77.5 81.7 72.6 72.6 79.2 67.3 67.3 76.4
SHC 60.8 72.4 83.9 58.6 70.1 81.7 56.3 67.7 79.2 53.6 65.0 76.4
67TC 90.1 90.1 90.1 86.0 86.0 86.0 81.4 81.4 81.4 75.9 75.9 75.9
SHC 50.2 61.8 73.3 48.5 60.1 71.6 46.5 58.1 69.7 44.2 55.8 67.4
72TC 98.0 98.0 98.0 94.0 94.0 94.0 89.5 89.5 89.5 84.3 84.3 84.3
SHC 39.1 50.7 62.4 37.5 49.2 60.9 35.8 47.5 59.2 33.8 45.5 57.2
76TC − 104.3 104.3 − 100.4 100.4 − 95.9 95.9 − 90.7 90.7
SHC − 41.7 54.0 − 40.3 52.7 − 38.7 51.0 − 36.8 49.0
2625 C
fm
EA
T (
wb
)
58TC 82.1 82.1 93.2 78.4 78.4 89.0 74.4 74.4 84.4 70.0 70.0 79.5
SHC 71.0 82.1 93.2 67.8 78.4 89.0 64.3 74.4 84.4 60.6 70.0 79.5
62TC 84.9 84.9 91.8 80.4 80.4 89.5 75.4 75.4 86.7 70.2 70.2 82.9
SHC 65.4 78.6 91.8 63.2 76.3 89.5 60.6 73.7 86.7 57.6 70.2 82.9
67TC 92.5 92.5 92.5 88.3 88.3 88.3 83.6 83.6 83.6 78.3 78.3 78.3
SHC 53.0 66.3 79.5 51.3 64.6 78.0 49.4 62.8 76.1 47.2 60.6 73.9
72TC 100.4 100.4 100.4 96.4 96.4 96.4 91.7 91.7 91.7 86.4 86.4 86.4
SHC 40.2 53.5 66.7 38.7 52.0 65.3 36.9 50.3 63.7 35.0 48.4 61.8
76TC − 106.5 106.5 − 102.6 102.6 − 98.0 98.0 − 92.7 92.7
SHC − 43.3 57.6 − 41.8 55.9 − 40.2 54.1 − 38.4 52.2
3000 C
fm
EA
T (
wb
)
58TC 85.7 85.7 97.3 82.2 82.2 93.3 78.0 78.0 88.6 73.5 73.5 83.4
SHC 74.1 85.7 97.3 71.1 82.2 93.3 67.5 78.0 88.6 63.6 73.5 83.4
62TC 86.9 86.9 98.7 82.8 82.8 96.4 78.2 78.2 92.3 73.6 73.6 86.9
SHC 69.3 84.0 98.7 67.2 81.8 96.4 64.1 78.2 92.3 60.3 73.6 86.9
67TC 94.3 94.3 94.3 90.1 90.1 90.1 85.2 85.2 85.2 79.8 79.8 80.1
SHC 55.6 70.5 85.4 54.0 68.9 83.9 52.1 67.1 82.2 49.9 65.0 80.1
72TC 102.2 102.2 102.2 98.1 98.1 98.1 93.3 93.3 93.3 87.9 87.9 87.9
SHC 41.2 56.0 70.7 39.7 54.6 69.5 38.0 53.0 68.0 36.0 51.1 66.2
76TC − 108.1 108.1 − 104.2 104.2 − 99.5 99.5 − 94.2 94.2
SHC − 44.5 60.2 − 43.2 58.7 − 41.6 57.0 − 39.8 55.2
3375 C
fm
EA
T (
wb
)
58TC 88.5 88.5 100.4 85.0 85.0 96.4 81.0 81.0 92 76.5 76.5 86.8
SHC 76.5 88.5 100.4 73.5 85.0 96.4 70.1 81.0 92 66.1 76.5 86.8
62TC 88.9 88.9 103.9 85.1 85.1 100.4 81.1 81.1 95.7 76.5 76.5 90.3
SHC 72.3 88.1 103.9 69.7 85.1 100.4 66.5 81.1 95.7 62.7 76.5 90.3
67TC 95.8 95.8 95.8 91.5 91.5 91.5 86.6 86.6 87.9 81.1 81.1 85.8
SHC 58.0 74.4 90.9 56.4 73.0 89.6 54.6 71.3 87.9 52.4 69.1 85.8
72TC 103.6 103.6 103.6 99.4 99.4 99.4 94.6 94.6 94.6 89.1 89.1 89.1
SHC 42.0 58.3 74.5 40.6 57.0 73.4 38.9 55.5 72.0 37.0 53.7 70.3
76TC − 109.2 109.2 − 105.4 105.4 − 100.7 100.7 − 95.3 95.3
SHC − 45.6 62.6 − 44.4 61.3 − 42.8 59.7 − 41.0 58.0
3750 C
fm
EA
T (
wb
)
58TC 90.8 90.8 103.0 87.3 87.3 99.1 83.3 83.3 94.5 78.8 78.8 89.4
SHC 78.5 90.8 103.0 75.5 87.3 99.1 72.0 83.3 94.5 68.2 78.8 89.4
62TC 90.9 90.9 107.2 87.4 87.4 103.1 83.3 83.3 98.4 78.9 78.9 93.1
SHC 74.5 90.9 107.2 71.6 87.4 103.1 68.3 83.3 98.4 64.7 78.9 93.1
67TC 97.0 97.0 97.0 92.6 92.6 95.1 87.6 87.6 93.4 82.1 82.1 91.2
SHC 60.3 78.2 96.2 58.8 76.9 95.1 56.9 75.2 93.4 54.8 73.0 91.2
72TC 104.7 104.7 104.7 100.5 100.5 100.5 95.6 95.6 95.6 90.1 90.1 90.1
SHC 42.9 60.5 78.1 41.4 59.3 77.1 39.8 57.8 75.9 37.9 56.1 74.3
76TC − 110.2 110.2 − 106.2 106.2 − 101.6 101.6 − 96.1 96.1
SHC − 46.7 64.8 − 45.4 63.6 − 44.0 62.3 − 42.2 60.6
* See Minimum−Maximum Airflow Ratings in Table 3. Do not operate outside these limits.LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice.40 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 7.5 TONS
RAS090/091 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − CFM2250/0.05 3000/0.07 3750/0.09
Air Entering Evaporator − Ewb (F)72 67 62 72 67 62 72 67 62
75
TC 103.05 93.02 83.60 109.77 99.52 90.08 114.01 103.69 95.19SHC 43.66 55.34 67.09 50.99 66.29 81.31 57.49 76.27 92.20kW 4.90 4.83 4.77 4.82 4.88 4.96 4.99 4.91 4.85
85
TC 95.39 85.83 76.88 101.59 91.89 82.95 105.53 95.76 87.77SHC 36.42 48.47 60.60 43.24 58.99 74.40 49.44 68.68 84.90kW 5.49 5.42 5.36 5.40 5.47 5.54 5.58 5.50 5.44
95
TC 87.48 78.44 69.97 93.21 84.05 75.61 96.84 87.63 80.14SHC 28.98 41.46 53.97 35.32 51.53 67.34 41.21 60.92 77.41kW 6.16 6.09 6.03 6.08 6.14 6.21 6.24 6.17 6.11
105
TC 79.35 70.83 62.84 84.57 75.96 68.04 87.88 79.23 72.26SHC 21.34 34.26 47.18 27.17 43.86 60.08 32.73 52.95 69.70kW 6.93 6.86 6.81 6.85 6.91 6.97 7.00 6.93 6.88
115TC 70.87 62.89 55.42 75.58 67.54 60.15 78.56 70.51 64.06
SHC 13.40 26.79 40.14 18.70 35.89 52.54 23.94 44.68 61.67kW 7.79 7.74 7.69 7.73 7.78 7.83 7.86 7.80 7.76
RAS090/091 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − Ewb (F)
75 Dry Bulb62.5 Wet Bulb(50% Relative)
75 Dry Bulb64 Wet Bulb
(56% Relative)
75 Dry Bulb65.3 Wet Bulb(60% Relative)
Air Entering Evaporator − Cfm2250 3000 3750 2250 3000 3750 2250 3000 3750
80
TC 27.60 32.75 30.19 40.09 39.43 37.73 45.06 45.25 44.25SHC −3.12 5.20 6.71 3.75 5.24 6.75 3.77 5.26 6.78kW 4.56 4.51 4.46 4.63 4.60 4.56 4.70 4.67 4.64
75
TC 35.40 33.78 31.20 41.14 40.51 38.80 46.15 46.37 45.38SHC 4.67 6.17 7.69 4.71 6.21 7.73 4.74 6.24 7.76kW 4.41 4.36 4.39 4.41 4.36 4.36 4.41 4.39 4.36
70
TC 36.36 34.71 32.18 42.10 41.47 39.77 47.08 47.31 46.32SHC 5.63 7.14 8.66 5.67 7.18 8.71 5.70 7.21 8.74kW 4.43 4.49 4.41 4.44 4.40 4.39 4.49 4.47 4.44
60
TC 38.25 36.64 34.15 43.97 43.37 41.72 48.98 49.22 48.26SHC 7.56 9.09 10.62 7.60 9.13 10.66 7.62 9.15 10.69kW 4.56 4.55 4.43 4.57 4.53 4.46 4.56 4.55 4.50
50
TC 40.15 38.60 36.14 45.95 45.37 43.73 50.57 50.97 49.56SHC 9.48 11.03 12.58 9.52 11.07 12.62 9.54 11.10 12.64kW 4.63 4.52 4.38 4.45 4.41 4.33 5.25 4.91 5.60
40
TC 42.18 40.62 38.11 47.80 47.25 45.43 52.65 52.75 51.83SHC 11.41 12.98 14.54 11.45 13.02 14.58 11.47 13.04 14.60kW 4.32 4.37 4.37 4.65 4.60 4.89 4.96 5.20 5.12
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
NOTES: 1. Direct interpolation is permissible. Do not extrapolate.2. The following formulas may be used:
tldb = tedb –sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet−bulb temperature corresponding to enthalpy of airleaving evaporator coil (hlwb)
hlwb = hewb –total capacity (Btuh)
4.5 x cfm Where: hewb = Enthalpy of air entering evaporator coil
Specifications subject to change without notice. 41513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 8.5 TONS
RAS101(RTPF)
AMBIENT TEMPERATURE85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
2550 C
fm
EA
T (
wb
)
58TC 88.1 88.1 99.9 84.1 84.1 95.3 79.6 79.6 90.3 74.9 74.9 84.9
SHC 76.4 88.1 99.9 72.8 84.1 95.3 69.0 79.6 90.3 64.9 74.9 84.9
62TC 93.9 93.9 95.2 88.6 88.6 92.6 82.8 82.8 89.7 76.6 76.6 86.5
SHC 69.4 82.3 95.2 66.8 79.7 92.6 64.1 76.9 89.7 61.0 73.8 86.5
67TC 103.8 103.8 103.8 98.7 98.7 98.7 93.0 93.0 93.0 86.7 86.7 86.7
SHC 57.8 70.7 83.6 55.6 68.5 81.4 53.1 66.1 79.0 50.5 63.4 76.4
72TC 113.1 113.1 113.1 108.0 108.0 108.0 102.4 102.4 102.4 96.1 96.1 96.1
SHC 45.2 58.3 71.3 43.2 56.3 69.3 41.1 54.1 67.1 38.7 51.7 64.7
76TC − 119.9 119.9 − 114.7 114.7 − 109.0 109.0 − 102.7 102.7
SHC − 47.9 61.9 − 46.0 60.1 − 44.1 58.1 − 41.9 55.8
2975 C
fm
EA
T (
wb
)
58TC 93.6 93.6 106.1 89.3 89.3 101.2 84.6 84.6 96.0 79.6 79.6 90.3
SHC 81.1 93.6 106.1 77.4 89.3 101.2 73.3 84.6 96.0 69.0 79.6 90.3
62TC 97.5 97.5 104.3 92.0 92.0 101.4 86.1 86.1 98.3 79.8 79.8 94.1
SHC 74.7 89.5 104.3 72.0 86.7 101.4 69.1 83.7 98.3 65.6 79.8 94.1
67TC 106.7 106.7 106.7 101.5 101.5 101.5 95.7 95.7 95.7 89.2 89.2 89.2
SHC 61.0 75.8 90.6 58.8 73.6 88.5 56.4 71.3 86.1 53.8 68.7 83.6
72TC 115.8 115.8 115.8 110.6 110.6 110.6 104.9 104.9 104.9 98.4 98.4 98.4
SHC 46.5 61.3 76.2 44.5 59.4 74.2 42.3 57.2 72.1 40.0 54.8 69.7
76TC − 122.4 122.4 − 117.0 117.0 − 111.1 111.1 − 104.5 104.5
SHC − 49.8 66.1 − 47.8 63.9 − 45.7 61.6 − 43.4 59.0
3400 C
fm
EA
T (
wb
)
58TC 98.1 98.1 111.3 93.7 93.7 106.2 88.9 88.9 100.8 83.7 83.7 94.9
SHC 85.0 98.1 111.3 81.2 93.7 106.2 77.0 88.9 100.8 72.5 83.7 94.9
62TC 100.0 100.0 112.3 94.9 94.9 108.6 89.1 89.1 104.9 83.8 83.8 98.7
SHC 79.3 95.8 112.3 76.3 92.5 108.6 73.2 89.1 104.9 68.8 83.8 98.7
67TC 109.0 109.0 109.0 103.6 103.6 103.6 97.6 97.6 97.6 91.0 91.0 91.0
SHC 63.9 80.5 97.2 61.8 78.5 95.2 59.4 76.1 92.9 56.8 73.5 90.3
72TC 117.9 117.9 117.9 112.5 112.5 112.5 106.6 106.6 106.6 100.0 100.0 100.0
SHC 47.6 64.1 80.6 45.6 62.1 78.7 43.4 60.0 76.6 41.1 57.6 74.2
76TC − 124.2 124.2 − 118.6 118.6 − 112.5 112.5 − 105.7 105.7
SHC − 51.2 69.0 − 49.2 66.7 − 47.0 64.4 − 44.7 61.9
3825 C
fm
EA
T (
wb
)
58TC 101.6 101.6 115.1 97.2 97.2 110.1 92.3 92.3 104.6 87.0 87.0 98.6
SHC 88.0 101.6 115.1 84.2 97.2 110.1 80.0 92.3 104.6 75.4 87.0 98.6
62TC 101.9 101.9 120.0 97.3 97.3 114.6 92.4 92.4 108.9 87.1 87.1 102.6
SHC 83.7 101.8 120.0 79.9 97.3 114.6 75.9 92.4 108.9 71.6 87.1 102.6
67TC 110.7 110.7 110.7 105.3 105.3 105.3 99.2 99.2 99.3 92.5 92.5 96.7
SHC 66.7 85.0 103.4 64.6 83.0 101.5 62.2 80.8 99.3 59.6 78.2 96.7
72TC 119.4 119.4 119.4 114.0 114.0 114.0 108.0 108.0 108.0 101.3 101.3 101.3
SHC 48.5 66.6 84.6 46.6 64.7 82.7 44.4 62.6 80.7 42.1 60.2 78.4
76TC − 125.5 125.5 − 119.8 119.8 − 113.6 113.6 − 106.7 106.7
SHC − 52.4 71.5 − 50.4 69.3 − 48.2 67.0 − 45.9 64.4
4250 C
fm
EA
T (
wb
)
58TC 104.4 104.4 118.3 99.9 99.9 113.2 95.0 95.0 107.6 89.5 89.5 101.5
SHC 90.4 104.4 118.3 86.6 99.9 113.2 82.3 95.0 107.6 77.6 89.5 101.5
62TC 104.4 104.4 123.0 99.9 99.9 117.8 95.0 95.0 112.0 89.6 89.6 105.6
SHC 85.8 104.4 123.0 82.1 99.9 117.8 78.1 95.0 112.0 73.6 89.6 105.6
67TC 112.1 112.1 112.1 106.6 106.6 107.5 100.4 100.4 105.3 93.6 93.6 102.7
SHC 69.2 89.2 109.2 67.2 87.3 107.5 64.9 85.1 105.3 62.3 82.5 102.7
72TC 120.7 120.7 120.7 115.1 115.1 115.1 109.0 109.0 109.0 102.2 102.2 102.2
SHC 49.4 68.9 88.4 47.4 67.0 86.5 45.3 64.9 84.6 42.9 62.6 82.3
76TC − 126.6 126.6 − 120.8 120.8 − 114.5 114.5 − 107.4 107.4
SHC − 53.5 73.9 − 51.5 71.7 − 49.3 69.4 − 46.9 66.8
LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice.42 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 8.5 TONS
RAS102(RTPF)
Ambient Temperature85 95 105 115
EA (dB) EA (dB) EA (dB) EA (dB)75 80 85 75 80 85 75 80 85 75 80 85
2550 C
fm
EA
T (
wb
)
58TC 89.7 89.7 101.6 85.2 85.2 96.5 79.6 79.6 90.1 73.8 73.8 83.6
SHC 77.8 89.7 101.6 73.9 85.2 96.5 69.0 79.6 90.1 64.0 73.8 83.6
62TC 94.3 94.3 97.9 88.7 88.7 95.2 81.3 81.3 91.5 74.3 74.3 86.5
SHC 71.0 84.4 97.9 68.2 81.7 95.2 64.7 78.1 91.5 60.6 73.6 86.5
67TC 105.0 105.0 105.0 99.3 99.3 99.3 92.2 92.2 92.2 84.1 84.1 84.1
SHC 59.0 72.6 86.1 56.6 70.1 83.7 53.6 67.1 80.7 50.3 63.8 77.3
72TC 115.9 115.9 115.9 110.4 110.4 110.4 104.2 104.2 104.2 96.0 96.0 96.0
SHC 46.4 60.0 73.6 44.3 57.9 71.5 41.9 55.5 69.1 38.8 52.4 65.9
76TC − 123.7 123.7 − 118.3 118.3 − 112.4 112.4 − 105.7 105.7
SHC − 49.3 63.3 − 47.3 61.4 − 45.3 59.3 − 42.9 56.7
2975 C
fm
EA
T (
wb
)
58TC 95.3 95.3 107.9 90.7 90.7 102.7 84.8 84.8 96.1 78.7 78.7 89.1
SHC 82.6 95.3 107.9 78.6 90.7 102.7 73.5 84.8 96.1 68.2 78.7 89.1
62TC 97.9 97.9 107.8 92.1 92.1 104.7 85.4 85.4 99.4 78.8 78.8 92.8
SHC 76.7 92.2 107.8 73.9 89.3 104.7 69.6 84.5 99.4 64.8 78.8 92.8
67TC 108.5 108.5 108.5 102.6 102.6 102.6 95.4 95.4 95.4 86.9 86.9 86.9
SHC 62.8 78.4 94.1 60.4 76.0 91.7 57.4 73.1 88.8 54.0 69.7 85.3
72TC 119.1 119.1 119.1 113.5 113.5 113.5 107.2 107.2 107.2 99.2 99.2 99.2
SHC 47.9 63.5 79.2 45.8 61.5 77.1 43.5 59.2 74.9 40.6 56.3 72.0
76TC − 126.4 126.4 − 120.8 120.8 − 114.8 114.8 − 108.2 108.2
SHC − 51.1 67.4 − 49.2 65.3 − 47.0 63.0 − 44.8 60.7
3400 C
fm
EA
T (
wb
)
58TC 100.0 100.0 113.3 95.2 95.2 107.9 89.3 89.3 101.1 82.9 82.9 93.9
SHC 86.7 100.0 113.3 82.6 95.2 107.9 77.4 89.3 101.1 71.8 82.9 93.9
62TC 101.1 101.1 115.8 95.7 95.7 111.7 89.4 89.4 105.3 83.0 83.0 97.7
SHC 81.5 98.7 115.8 78.2 94.9 111.7 73.5 89.4 105.3 68.2 83.0 97.7
67TC 111.1 111.1 111.1 105.1 105.1 105.1 97.8 97.8 97.8 89.1 89.1 93.0
SHC 66.2 83.9 101.6 63.9 81.6 99.3 61.0 78.7 96.5 57.5 75.3 93.0
72TC 121.3 121.3 121.3 115.6 115.6 115.6 109.4 109.4 109.4 101.5 101.5 101.5
SHC 49.2 66.7 84.3 47.1 64.7 82.3 44.9 62.5 80.2 42.1 59.9 77.7
76TC − 128.3 128.3 − 122.6 122.6 − 116.3 116.3 − 109.7 109.7
SHC − 52.7 70.7 − 50.7 68.6 − 48.6 66.4 − 46.4 64.2
3825 C
fm
EA
T (
wb
)
58TC 104.0 104.0 117.8 99.1 99.1 112.3 93.2 93.2 105.5 86.5 86.5 97.9
SHC 90.2 104.0 117.8 86.0 99.1 112.3 80.8 93.2 105.5 75.0 86.5 97.9
62TC 104.2 104.2 122.7 99.3 99.3 116.9 93.3 93.3 109.8 86.6 86.6 101.9
SHC 85.7 104.2 122.7 81.7 99.3 116.9 76.7 93.3 109.8 71.2 86.6 101.9
67TC 113.1 113.1 113.1 107.1 107.1 107.1 99.9 99.9 103.8 91.0 91.0 100.3
SHC 69.4 89.1 108.8 67.1 86.8 106.5 64.3 84.1 103.8 60.9 80.6 100.3
72TC 123.0 123.0 123.0 117.2 117.2 117.2 110.9 110.9 110.9 103.3 103.3 103.3
SHC 50.3 69.7 89.0 48.3 67.7 87.1 46.1 65.6 85.2 43.5 63.3 83.0
76TC − 129.7 129.7 − 124.0 124.0 − 117.5 117.5 − 110.8 110.8
SHC − 54.0 73.7 − 52.1 71.7 − 50.0 69.5 − 47.8 67.4
4250 C
fm
EA
T (
wb
)
58TC 107.4 107.4 121.7 102.5 102.5 116.1 96.5 96.5 109.3 89.5 89.5 101.4
SHC 93.1 107.4 121.7 88.9 102.5 116.1 83.7 96.5 109.3 77.6 89.5 101.4
62TC 107.5 107.5 126.6 102.6 102.6 120.8 96.6 96.6 113.7 89.6 89.6 105.5
SHC 88.4 107.5 126.6 84.4 102.6 120.8 79.5 96.6 113.7 73.7 89.6 105.5
67TC 114.7 114.7 115.6 108.7 108.7 113.5 101.7 101.7 110.8 92.6 92.6 107.2
SHC 72.5 94.0 115.6 70.2 91.8 113.5 67.5 89.2 110.8 64.0 85.6 107.2
72TC 124.3 124.3 124.3 118.5 118.5 118.5 112.1 112.1 112.1 104.7 104.7 104.7
SHC 51.3 72.4 93.4 49.3 70.5 91.7 47.2 68.5 89.9 44.7 66.4 88.1
76TC − 130.7 130.7 − 125.0 125.0 − 118.5 118.5 − 111.6 111.6
SHC − 55.3 76.5 − 53.5 74.6 − 51.3 72.4 − 49.2 70.3
* See Minimum−Maximum Airflow Ratings in Table 3. Do not operate outside these limits.LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice. 43513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 8.5 TONS
RAS0101/102 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − CFM2550/0.04 3400/0.05 4250/0.07
Air Entering Evaporator − Ewb (F)72 67 62 72 67 62 72 67 62
75
TC 119.20 107.44 96.41 126.95 114.98 103.92 131.87 119.81 109.54SHC 50.63 63.94 77.40 59.17 76.72 94.21 66.80 88.44 108.22kW 5.67 5.57 5.47 5.54 5.63 5.74 5.79 5.68 5.59
85
TC 110.40 99.22 88.76 117.63 106.26 95.77 122.21 110.77 101.07SHC 42.39 56.16 70.07 50.42 68.45 86.38 57.71 79.86 99.95kW 6.33 6.23 6.14 6.20 6.30 6.40 6.45 6.34 6.25
95
TC 101.37 90.79 80.86 108.07 97.31 87.39 112.29 101.47 92.38SHC 33.97 48.22 62.56 41.46 60.01 78.39 48.40 71.09 91.47kW 7.08 6.99 6.90 6.96 7.05 7.16 7.20 7.09 7.01
105
TC 92.04 82.06 72.71 98.19 88.05 78.72 102.07 91.86 83.40SHC 25.31 40.06 54.88 32.24 51.33 70.17 38.85 62.06 82.67kW 7.94 7.85 7.77 7.83 7.91 8.01 8.06 7.95 7.87
115TC 82.37 73.01 64.24 87.95 78.45 69.73 91.46 81.90 74.09
SHC 16.38 31.65 46.95 22.71 42.37 61.69 28.94 52.74 73.52kW 8.92 8.84 8.77 8.82 8.89 8.98 9.02 8.93 8.86
RAS0101/102 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − Ewb (F)
75 Dry Bulb62.5 Wet Bulb(50% Relative)
75 Dry Bulb64 Wet Bulb
(56% Relative)
75 Dry Bulb65.3 Wet Bulb(60% Relative)
Air Entering Evaporator − Cfm2550 3400 4250 2550 3400 4250 2550 3400 4250
80
TC 37.61 33.13 26.77 44.74 41.60 36.46 50.96 48.99 44.93SHC −0.52 −0.63 −0.73 −0.46 −0.57 −0.67 −0.42 −0.53 −0.62kW 5.88 5.68 5.44 6.13 5.97 5.76 6.35 6.24 6.06
75
TC 38.71 34.24 27.86 45.84 42.73 37.59 52.05 50.11 46.06SHC 0.45 0.34 0.25 0.50 0.40 0.31 0.54 0.44 0.36kW 5.68 5.47 5.22 5.94 5.78 5.56 6.18 6.07 5.88
70
TC 39.70 35.25 28.83 46.80 43.70 38.59 52.97 51.04 47.02SHC 1.41 1.32 1.23 1.47 1.37 1.29 1.50 1.41 1.34kW 5.65 5.42 5.24 5.97 5.79 5.53 6.26 6.13 5.91
60
TC 41.77 37.33 30.76 48.86 45.80 40.71 55.00 53.10 49.12SHC 3.34 3.26 3.18 3.40 3.32 3.25 3.43 3.36 3.29kW 5.42 5.15 5.17 5.80 5.59 5.30 6.16 6.01 5.75
50
TC 43.83 39.27 32.61 50.92 47.89 42.70 57.04 55.16 51.22SHC 5.27 5.21 5.14 5.32 5.27 5.21 5.36 5.31 5.25kW 5.18 5.15 5.17 5.62 5.39 5.05 6.04 5.87 5.59
40
TC 45.75 41.13 34.50 53.08 50.00 44.64 59.24 57.40 53.44SHC 7.20 7.15 6.95 7.26 7.21 7.16 7.29 7.25 7.21kW 4.79 4.98 4.80 5.25 5.01 5.23 5.68 5.51 5.21
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
NOTES: 1. Direct interpolation is permissible. Do not extrapolate.2. The following formulas may be used:
tldb = tedb –sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet−bulb temperature corresponding to enthalpy of airleaving evaporator coil (hlwb)
hlwb = hewb –total capacity (Btuh)
4.5 x cfm Where: hewb = Enthalpy of air entering evaporator coil
Specifications subject to change without notice.44 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) SINGLE STAGE COOLING 10 TONS
RAS121(RTPF)
AMBIENT TEMPERATURE85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
3000 C
fm
EA
T (
wb
)
58TC 106.3 106.3 120.5 101.7 101.7 115.2 96.6 96.6 109.4 91.0 91.0 103.1
SHC 92.2 106.3 120.5 88.2 101.7 115.2 83.8 96.6 109.4 78.9 91.0 103.1
62TC 112.5 112.5 115.2 106.5 106.5 112.3 99.9 99.9 109.0 92.7 92.7 105.2
SHC 83.8 99.5 115.2 81.0 96.6 112.3 77.8 93.4 109.0 74.2 89.7 105.2
67TC 123.5 123.5 123.5 117.8 117.8 117.8 111.3 111.3 111.3 104.0 104.0 104.0
SHC 69.2 85.0 100.7 66.8 82.5 98.3 64.1 79.8 95.5 61.0 76.8 92.5
72TC 134.3 134.3 134.3 128.5 128.5 128.5 122.0 122.0 122.0 114.7 114.7 114.7
SHC 53.8 69.6 85.5 51.6 67.4 83.2 49.1 64.9 80.7 46.3 62.1 77.9
76TC − 142.4 142.4 − 136.3 136.3 − 129.5 129.5 − 121.8 121.8
SHC − 56.8 73.3 − 54.7 71.2 − 52.3 68.8 − 49.7 66.2
3500 C
fm
EA
T (
wb
)
58TC 112.9 112.9 127.8 108.0 108.0 122.3 102.7 102.7 116.3 96.8 96.8 109.7
SHC 97.9 112.9 127.8 93.6 108.0 122.3 89.0 102.7 116.3 83.9 96.8 109.7
62TC 116.3 116.3 126.2 110.5 110.5 123.3 103.8 103.8 119.5 97.1 97.1 114.3
SHC 90.2 108.2 126.2 87.4 105.3 123.3 84.0 101.8 119.5 79.8 97.1 114.3
67TC 126.9 126.9 126.9 120.9 120.9 120.9 114.3 114.3 114.3 106.8 106.8 106.8
SHC 73.2 91.3 109.4 70.8 88.9 107.1 68.1 86.2 104.4 65.0 83.2 101.3
72TC 137.5 137.5 137.5 131.4 131.4 131.4 124.7 124.7 124.7 117.2 117.2 117.2
SHC 55.3 73.4 91.5 53.1 71.1 89.2 50.6 68.7 86.7 47.8 65.9 83.9
76TC − 145.1 145.1 − 138.8 138.8 − 131.7 131.7 − 123.6 123.6
SHC − 59.0 78.2 − 56.7 75.8 − 54.3 73.1 − 51.5 70.0
4000 C
fm
EA
T (
wb
)
58TC 117.8 117.8 133.5 113.0 113.0 128.0 107.5 107.5 121.8 101.5 101.5 115.0
SHC 102.2 117.8 133.5 98.0 113.0 128.0 93.3 107.5 121.8 88.0 101.5 115.0
62TC 119.1 119.1 136.0 113.5 113.5 132.5 107.7 107.7 126.7 101.6 101.6 119.6
SHC 95.8 115.9 136.0 92.8 112.6 132.5 88.6 107.7 126.7 83.6 101.6 119.6
67TC 129.4 129.4 129.4 123.3 123.3 123.3 116.5 116.5 116.5 108.9 108.9 109.8
SHC 76.9 97.3 117.7 74.5 95.0 115.4 71.8 92.3 112.8 68.8 89.3 109.8
72TC 139.7 139.7 139.7 133.5 133.5 133.5 126.6 126.6 126.6 118.8 118.8 118.8
SHC 56.7 76.8 97.0 54.4 74.6 94.7 51.9 72.1 92.3 49.1 69.3 89.5
76TC − 147.0 147.0 − 140.5 140.5 − 133.2 133.2 − 124.9 124.9
SHC − 60.6 81.7 − 58.4 79.3 − 55.8 76.5 − 53.0 73.5
4500 C
fm
EA
T (
wb
)
58TC 121.7 121.7 137.9 116.8 116.8 132.3 111.2 111.2 126.0 105.0 105.0 118.9
SHC 105.6 121.7 137.9 101.3 116.8 132.3 96.4 111.2 126.0 91.0 105.0 118.9
62TC 121.8 121.8 143.4 116.9 116.9 137.6 111.3 111.3 131.0 105.1 105.1 123.7
SHC 100.2 121.8 143.4 96.1 116.9 137.6 91.6 111.3 131.0 86.5 105.1 123.7
67TC 131.3 131.3 131.3 125.1 125.1 125.1 118.2 118.2 120.8 110.5 110.5 117.7
SHC 80.3 102.9 125.5 78.0 100.7 123.3 75.3 98.0 120.8 72.3 95.0 117.7
72TC 141.5 141.5 141.5 135.1 135.1 135.1 128.0 128.0 128.0 120.1 120.1 120.1
SHC 57.9 80.0 102.1 55.6 77.7 99.9 53.1 75.2 97.4 50.3 72.4 94.6
76TC − 148.3 148.3 − 141.8 141.8 − 134.3 134.3 − 125.8 125.8
SHC − 62.1 84.9 − 59.8 82.5 − 57.3 79.7 − 54.4 76.6
5000 C
fm
EA
T (
wb
)
58TC 125.0 125.0 141.6 120.0 120.0 135.9 114.3 114.3 129.5 107.9 107.9 122.3
SHC 108.4 125.0 141.6 104.0 120.0 135.9 99.1 114.3 129.5 93.6 107.9 122.3
62TC 125.1 125.1 147.2 120.1 120.1 141.4 114.4 114.4 134.7 108.0 108.0 127.2
SHC 102.9 125.1 147.2 98.8 120.1 141.4 94.1 114.4 134.7 88.9 108.0 127.2
67TC 132.8 132.8 133.0 126.5 126.5 130.8 119.6 119.6 128.2 111.8 111.8 125.1
SHC 83.6 108.3 133.0 81.2 106.0 130.8 78.6 103.4 128.2 75.6 100.3 125.1
72TC 142.8 142.8 142.8 136.3 136.3 136.3 129.1 129.1 129.1 121.1 121.1 121.1
SHC 59.0 82.9 106.9 56.7 80.7 104.7 54.1 78.2 102.2 51.3 75.4 99.4
76TC − 149.4 149.4 − 142.8 142.8 − 135.1 135.1 − 126.5 126.5
SHC − 63.4 87.9 − 61.2 85.5 − 58.6 82.7 − 55.6 79.4
LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice. 45513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 10 TONS
RAS120(RTPF)
AMBIENT TEMPERATURE85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
3000 C
fm
EA
T (
wb
)
58TC 107.6 107.6 121.9 102.5 102.5 116.2 96.8 96.8 109.7 90.5 90.5 102.6
SHC 93.2 107.6 121.9 88.8 102.5 116.2 83.9 96.8 109.7 78.4 90.5 102.6
62TC 113.6 113.6 116.5 107.1 107.1 113.4 99.7 99.7 109.8 91.8 91.8 104.9
SHC 84.6 100.6 116.5 81.5 97.4 113.4 78.0 93.9 109.8 73.7 89.3 104.9
67TC 124.4 124.4 124.4 118.4 118.4 118.4 111.5 111.5 111.5 103.3 103.3 103.3
SHC 69.7 85.7 101.7 67.1 83.2 99.2 64.3 80.3 96.3 60.8 76.8 92.8
72TC 135.8 135.8 135.8 129.7 129.7 129.7 122.8 122.8 122.8 115 115 115
SHC 54.3 70.4 86.6 52.0 68.1 84.2 49.3 65.4 81.6 46.4 62.5 78.6
76TC − 145.3 145.3 − 139 139 − 131.9 131.9 − 124.1 124.1
SHC − 57.8 74.3 − 55.6 72.1 − 53.1 69.6 − 50.4 66.9
3500 C
fm
EA
T (
wb
)
58TC 114.2 114.2 129.4 108.9 108.9 123.4 102.9 102.9 116.6 96.3 96.3 109.1
SHC 98.9 114.2 129.4 94.3 108.9 123.4 89.1 102.9 116.6 83.4 96.3 109.1
62TC 117.2 117.2 127.9 111.0 111.0 124.7 104.0 104.0 119.5 96.5 96.5 113.7
SHC 91.1 109.5 127.9 88.1 106.4 124.7 83.9 101.7 119.5 79.3 96.5 113.7
67TC 127.8 127.8 127.8 121.7 121.7 121.7 114.5 114.5 114.5 106.6 106.6 106.6
SHC 73.8 92.3 110.8 71.3 89.8 108.3 68.4 87.0 105.5 65.2 83.8 102.3
72TC 139.4 139.4 139.4 133.0 133.0 133 125.8 125.8 125.8 117.9 117.9 117.9
SHC 56.0 74.6 93.1 53.7 72.2 90.8 51.0 69.6 88.2 48.1 66.7 85.4
76TC − 148.8 148.8 − 142.2 142.2 − 134.9 134.9 − 126.8 126.8
SHC − 60.2 79.5 − 58.0 77.1 − 55.4 74.5 − 52.7 71.6
4000 C
fm
EA
T (
wb
)
58TC 119.0 119.0 134.9 114.0 114.0 129.2 108.0 108.0 122.4 101.1 101.1 114.6
SHC 103.1 119.0 134.9 98.7 114.0 129.2 93.6 108.0 122.4 87.6 101.1 114.6
62TC 120.3 120.3 137.1 114.7 114.7 132.8 108.2 108.2 127.5 101.3 101.3 119.3
SHC 96.5 116.8 137.1 93.0 112.9 132.8 88.9 108.2 127.5 83.2 101.3 119.3
67TC 130.5 130.5 130.5 124.1 124.1 124.1 116.8 116.8 116.8 108.7 108.7 111.1
SHC 77.7 98.6 119.5 75.2 96.2 117.2 72.3 93.3 114.4 69.1 90.1 111.1
72TC 142.1 142.1 142.1 135.5 135.5 135.5 128.2 128.2 128.2 120.0 120.0 120.0
SHC 57.6 78.4 99.3 55.2 76.1 97.1 52.5 73.6 94.6 49.7 70.7 91.8
76TC − 151.4 151.4 − 144.7 144.7 − 137.1 137.1 − − −
SHC − 62.3 83.8 − 60.0 81.4 − 57.5 78.8 − − −
4500 C
fm
EA
T (
wb
)
58TC 123.0 123.0 139.5 117.8 117.8 133.6 111.9 111.9 126.9 105.3 105.3 119.3
SHC 106.6 123.0 139.5 102.1 117.8 133.6 97.0 111.9 126.9 91.2 105.3 119.3
62TC 123.4 123.4 144.4 117.9 117.9 139.0 112.0 112.0 132.0 105.4 105.4 124.2
SHC 100.9 122.7 144.4 96.9 117.9 139 92.1 112.0 132 86.6 105.4 124.2
67TC 132.6 132.6 132.6 126.0 126 126.0 118.7 118.7 122.9 110.4 110.4 119.6
SHC 81.4 104.6 127.9 78.9 102.3 125.7 76.1 99.5 122.9 72.9 96.2 119.6
72TC 144.2 144.2 144.2 137.4 137.4 137.4 129.9 129.9 129.9 121.6 121.6 121.6
SHC 59.0 82.1 105.2 56.6 79.8 103.1 54.0 77.3 100.7 51.1 74.5 98
76TC − 153.4 153.4 − 146.6 146.6 − 138.9 138.9 − − −
SHC − 64.1 87.8 − 61.9 85.6 − 59.4 83 − − −
5000 C
fm
EA
T (
wb
)
58TC 126.5 126.5 143.3 121.2 121.2 137.4 115.1 115.1 130.5 108.4 108.4 122.8
SHC 109.6 126.5 143.3 105.0 121.2 137.4 99.8 115.1 130.5 93.9 108.4 122.8
62TC 126.5 126.5 149.1 121.3 121.3 142.9 115.2 115.2 135.8 108.5 108.5 127.8
SHC 104.0 126.5 149.1 99.7 121.3 142.9 94.7 115.2 135.8 89.1 108.5 127.8
67TC 134.2 134.2 135.9 127.5 127.5 133.8 120.1 120.1 131.0 111.9 111.9 127.6
SHC 84.9 110.4 135.9 82.4 108.1 133.8 79.6 105.3 131 76.4 102.0 127.6
72TC 145.8 145.8 145.8 139.0 139.0 139.0 131.3 131.3 131.3 122.9 122.9 122.9
SHC 60.3 85.6 110.8 57.9 83.4 108.9 55.3 81.0 106.6 52.5 78.2 104
76TC − 155.1 155.1 − 148.2 148.2 − − − − − −
SHC − 65.9 91.5 − 63.7 89.5 − − − − − −
* See Minimum−Maximum Airflow Ratings in Table 3. Do not operate outside these limits.LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice.46 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 10 TONS
RAS120/121 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − CFM3000/0.04 4000/0.06 5000/0.07
Air Entering Evaporator − Ewb (F)72 67 62 72 67 62 72 67 62
75
TC 142.85 129.44 116.93 152.09 138.44 125.76 157.99 144.23 132.06SHC 58.38 74.88 91.58 67.96 89.45 111.02 76.63 102.94 127.93kW 7.19 6.97 6.79 6.92 7.12 7.35 7.45 7.22 7.02
85
TC 132.33 119.68 107.86 140.92 128.03 116.10 146.41 133.41 121.98SHC 48.44 65.56 82.83 57.37 79.50 101.68 65.65 92.58 118.12kW 7.98 7.77 7.58 7.72 7.92 8.14 8.25 8.01 7.82
95
TC 121.41 109.52 98.43 129.35 117.22 106.04 134.43 122.20 111.50SHC 38.19 55.92 73.78 46.47 69.22 92.01 54.34 81.92 107.96kW 8.87 8.66 8.48 8.61 8.80 9.03 9.14 8.90 8.71
105
TC 110.04 98.92 88.56 117.27 105.94 95.53 121.88 110.46 100.54SHC 27.59 45.94 64.39 35.16 58.57 81.98 42.56 70.82 97.40kW 9.86 9.66 9.48 9.61 9.79 10.02 10.12 9.89 9.70
115TC 98.09 87.74 78.13 104.62 94.08 84.45 108.76 98.13 89.01
SHC 16.52 35.47 54.53 23.37 47.44 71.46 30.32 59.25 86.31kW 10.95 10.76 10.60 10.72 10.89 11.10 11.19 10.98 10.81
RAS120/121 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − Ewb (F)
75 Dry Bulb62.5 Wet Bulb(50% Relative)
75 Dry Bulb64 Wet Bulb
(56% Relative)
75 Dry Bulb65.3 Wet Bulb(60% Relative)
Air Entering Evaporator − Cfm3000 4000 5000 3000 4000 5000 3000 4000 5000
80
TC 44.78 39.41 31.89 53.22 49.44 43.38 60.56 58.12 53.32SHC −0.44 −0.57 −0.69 −0.37 −0.51 −0.61 −0.33 −0.46 −0.56kW 6.96 6.77 6.52 7.26 7.13 6.91 7.54 7.45 7.27
75
TC 45.84 40.46 32.86 54.28 50.51 44.45 61.61 59.19 54.40SHC 0.53 0.40 0.29 0.60 0.47 0.37 0.64 0.52 0.42kW 6.77 6.56 6.29 7.11 6.95 6.72 7.41 7.31 7.12
70
TC 46.91 41.48 33.50 55.36 51.59 45.50 62.69 60.28 55.49SHC 1.51 1.38 1.27 1.57 1.45 1.35 1.61 1.50 1.40kW 6.54 6.32 6.02 6.90 6.74 6.49 7.23 7.13 6.92
60
TC 48.88 43.42 35.76 57.29 53.56 47.48 64.56 62.16 57.42SHC 3.44 3.34 3.24 3.51 3.40 3.31 3.55 3.45 3.37kW 6.45 6.16 6.70 6.93 6.72 6.39 7.38 7.24 6.96
50
TC 50.83 45.28 37.67 59.22 55.52 49.43 66.05 64.03 59.34SHC 5.38 5.29 5.20 5.45 5.36 5.28 5.48 5.40 5.33kW 6.46 6.01 6.34 6.98 6.71 6.29 8.15 7.38 7.02
40
TC 52.82 47.29 39.50 61.14 57.48 51.39 68.23 65.88 61.25SHC 7.32 7.24 7.20 7.38 7.31 7.24 7.43 7.36 7.29kW 6.29 6.09 6.12 7.05 6.72 6.29 7.78 7.55 7.10
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
NOTES: 1. Direct interpolation is permissible. Do not extrapolate.2. The following formulas may be used:
tldb = tedb –sensible capacity (Btuh)
1.10 x cfm
tlwb = Wet−bulb temperature corresponding to enthalpy of airleaving evaporator coil (hlwb)
hlwb = hewb –total capacity (Btuh)
4.5 x cfm Where: hewb = Enthalpy of air entering evaporator coil
Specifications subject to change without notice. 47513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 12.5 TONS
RAS150(RTPF)
AMBIENT TEMPERATURE85 95 105 115
EAT (db) EAT (db) EAT (db) EAT (db)75 80 85 75 80 85 75 80 85 75 80 85
3600 C
fm
EA
T (
wb
)
58TC 127.6 127.6 142.9 121.7 121.7 137.6 115.0 115.0 130 108.3 108.3 122.6
SHC 110.3 126.6 142.9 105.8 121.7 137.6 99.9 115.0 130 94.1 108.3 122.6
62TC 136.1 136.1 136.1 131.1 131.1 131.1 123.8 123.8 124.5 114.9 114.9 120.3
SHC 96.6 112.8 129.0 94.7 111.2 127.7 91.4 108.0 124.5 87.3 103.8 120.3
67TC 146.2 146.2 146.2 142.0 142.0 142.0 136.2 136.2 136.2 128.8 128.8 128.8
SHC 78.5 94.4 110.3 76.9 93.1 109.2 74.7 91.0 107.3 71.7 88.1 104.6
72TC 155.9 155.9 155.9 152.4 152.4 152.4 147.2 147.2 147.2 140.1 140.1 140.1
SHC 60.1 76.6 93.2 58.7 75.2 91.7 56.8 73.3 89.7 54.2 70.6 87.0
76TC − 163.0 163 − 160.0 160 − 155.1 155.1 − 148.2 148.2
SHC − 62.0 81.8 − 61.1 80.9 − 59.5 79.3 − 57.0 76.3
4200 C
fm
EA
T (
wb
)
58TC 132.2 132.2 149.5 128.2 128.2 144.9 121.9 121.9 137.8 115.0 115.0 130.1
SHC 115.0 132.2 149.5 111.5 128.2 144.9 106.0 121.9 137.8 99.9 115.0 130.1
62TC 139.6 139.6 139.6 134.7 134.7 138 128.0 128.0 135.6 119.1 119.1 131.2
SHC 102.5 120.8 139 100.8 119.4 138 98.1 116.8 135.6 93.9 112.6 131.2
67TC 149.5 149.5 149.5 145.4 145.4 145.4 139.6 139.6 139.6 132.1 132.1 132.1
SHC 81.8 99.6 117.4 80.6 98.7 116.8 78.5 96.9 115.2 75.7 94.3 112.8
72TC 159.0 159.0 159.0 155.5 155.5 155.5 150.3 150.3 150.3 143.1 143.1 143.1
SHC 61.4 79.6 97.8 60.2 78.5 96.8 58.3 76.7 95 55.8 74.2 92.5
76TC − 165.7 165.7 − 162.8 162.8 − 157.8 157.8 − 150.8 150.8
SHC − 64.6 87.7 − 63.5 86.3 − 61.5 83.3 − 58.9 79.9
4800 C
fm
EA
T (
wb
)
58TC 136.7 136.7 154.5 133.0 133.0 150.3 127.7 127.7 144.3 120.6 120.6 136.4
SHC 118.9 136.7 154.5 115.7 133.0 150.3 111.0 127.7 144.3 104.9 120.6 136.4
62TC 142.2 142.2 147.8 137.4 137.4 147.1 131.0 131.0 144.7 122.8 122.8 140.3
SHC 107.7 127.8 147.8 106.2 126.7 147.1 103.6 124.2 144.7 99.3 119.8 140.3
67TC 152.1 152.1 152.1 148.0 148 148 142.2 142.2 142.2 134.6 134.6 134.6
SHC 84.8 104.3 123.7 83.8 103.8 123.7 82.0 102.3 122.6 79.4 99.9 120.4
72TC 161.3 161.3 161.3 157.8 157.8 157.8 152.5 152.5 152.5 145.4 145.4 145.4
SHC 62.6 82.2 101.9 61.4 81.4 101.3 59.7 79.7 99.8 57.2 77.3 97.5
76TC − 167.7 167.7 − 164.9 164.9 − 159.9 159.9 − 152.8 152.8
SHC − 66.4 91.4 − 65 89.2 − 63.1 86.4 − 60.5 83.1
5400 C
fm
EA
T (
wb
)
58TC 140.5 140.5 158.8 136.9 136.9 154.7 131.8 131.8 149 125.2 125.2 141.6
SHC 122.2 140.5 158.8 119 136.9 154.7 114.7 131.8 149 108.9 125.2 141.6
62TC 144.3 144.3 155.7 139.6 139.6 155 133.5 133.5 152.4 125.8 125.8 147.8
SHC 112.2 133.9 155.7 110.9 132.9 155 108.1 130.2 152.4 103.9 125.8 147.8
67TC 154.2 154.2 154.2 150.0 150.0 150.0 144.2 144.2 144.2 136.7 136.7 136.7
SHC 87.6 108.6 129.6 86.8 108.5 130.1 85.2 107.3 129.4 82.8 105.1 127.4
72TC 163.1 163.1 163.1 159.7 159.7 159.7 154.3 154.3 154.3 147.1 147.1 147.1
SHC 63.6 84.6 105.6 62.5 83.9 105.4 60.8 82.5 104.2 58.4 80.2 102
76TC − 169.3 169.3 − 166.5 166.5 − 161.5 161.5 − 154.2 154.2
SHC − 67.6 93.7 − 66.4 91.7 − 64.5 89.2 − 61.9 86.1
6000 C
fm
EA
T (
wb
)
58TC 143.6 143.6 162.3 140.1 140.1 158.3 135.1 135.1 152.7 128.7 128.7 145.5
SHC 124.9 143.6 162.3 121.8 140.1 158.3 117.5 135.1 152.7 111.9 128.7 145.5
62TC 146.1 146.1 162.4 141.7 141.7 161.5 135.6 135.6 159.2 128.8 128.8 151.2
SHC 116.1 139.3 162.4 114.7 138.1 161.5 112.1 135.6 159.2 106.4 128.8 151.2
67TC 155.8 155.8 155.8 151.6 151.6 151.6 145.9 145.9 145.9 138.3 138.3 138.3
SHC 90.1 112.6 135 89.6 112.8 136 88.3 112.0 135.8 85.9 110.0 134.1
72TC 164.5 164.5 164.5 161.2 161.2 161.2 155.8 155.8 155.8 148.5 148.5 148.5
SHC 64.5 86.7 108.9 63.5 86.3 109.1 61.9 85.1 108.2 59.6 82.9 106.3
76TC − 170.6 170.6 − 167.8 167.8 − 162.8 162.8 − 155.5 155.5
SHC − 68.7 95.8 − 67.5 94.1 − 65.7 91.8 − 63.3 88.8
* See Minimum−Maximum Airflow Ratings in Table 3. Do not operate outside these limits.LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice.48 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 12.5 TONS
RAS150 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN SUBCOOLING MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − CFM3750/0.02 5000/0.06 6250/0.05
Air Entering Evaporator − Ewb (F)72 67 62 72 67 62 72 67 62
75
TC 183.66 166.86 151.43 194.90 177.83 162.05 201.97 184.84 170.53SHC 79.39 100.52 121.91 91.70 119.42 147.05 102.94 137.00 166.71kW 9.82 9.63 9.46 9.58 9.76 9.96 10.04 9.84 9.67
85
TC 172.71 156.78 142.09 183.32 167.13 152.17 189.98 173.73 160.25SHC 69.03 90.92 112.95 80.69 109.17 137.51 91.49 126.33 156.65kW 10.82 10.63 10.45 10.57 10.76 10.96 11.04 10.84 10.67
95
TC 161.37 146.24 132.38 171.36 156.04 141.86 177.62 162.22 149.50SHC 58.44 81.04 103.77 69.42 98.67 127.71 79.83 115.45 146.15kW 11.92 11.73 11.56 11.68 11.86 12.05 12.14 11.93 11.77
105
TC 149.57 135.32 122.21 158.89 144.45 131.10 164.74 150.27 138.35SHC 47.57 70.92 94.32 57.85 87.91 117.61 67.79 104.26 135.30kW 13.12 12.94 12.77 12.89 13.06 13.24 13.32 13.13 12.97
115TC 137.22 123.88 111.55 145.85 132.33 119.84 151.27 137.71 126.67
SHC 36.31 60.47 84.57 45.87 76.77 107.19 55.34 92.66 123.98kW 14.41 14.25 14.10 14.20 14.35 14.53 14.59 14.42 14.28
RAS150 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT SYSTEM IN HOT GAS REHEAT MODE
TEMP (F)AIR ENTCONDENSER(Edb)
AIR ENTERING EVAPORATOR − Ewb (F)
75 Dry Bulb62.5 Wet Bulb(50% Relative)
75 Dry Bulb64 Wet Bulb
(56% Relative)
75 Dry Bulb65.3 Wet Bulb(60% Relative)
Air Entering Evaporator − Cfm3750 5000 6250 3750 5000 6250 3750 5000 6250
80
TC 52.42 45.88 36.99 62.64 58.07 51.07 71.56 68.64 63.23SHC −0.39 −0.54 −0.67 −0.31 −0.46 −0.58 −0.26 −0.40 −0.52kW 9.65 9.39 9.07 9.97 9.77 9.50 10.25 10.11 9.89
75
TC 53.45 46.63 36.10 63.77 59.11 51.87 72.76 69.80 64.31SHC 0.59 0.44 0.30 0.67 0.52 0.40 0.72 0.58 0.47kW 9.09 8.83 8.49 9.39 9.20 8.94 9.67 9.53 9.32
70
TC 54.33 46.91 37.58 64.77 60.01 52.30 73.80 70.80 65.24SHC 1.56 1.41 1.29 1.64 1.50 1.38 1.70 1.56 1.45kW 8.81 8.53 8.62 9.15 8.94 8.65 9.46 9.31 9.08
60
TC 55.47 49.48 40.48 66.62 62.07 54.88 75.68 72.76 67.28SHC 3.50 3.38 3.27 3.59 3.47 3.36 3.65 3.52 3.42kW 8.36 8.84 8.98 9.88 9.56 9.10 9.83 9.64 9.31
50
TC 58.33 51.72 42.81 68.72 63.93 55.84 77.74 74.77 69.24SHC 5.47 5.35 5.24 5.54 5.43 5.32 5.60 5.49 5.39kW 8.98 9.25 9.43 9.33 8.97 8.73 9.55 9.33 9.70
40
TC 60.33 53.69 46.89 70.67 65.93 49.83 79.46 76.62 71.24SHC 7.42 7.31 7.22 7.49 7.39 7.23 7.55 7.45 7.37kW 9.16 9.88 9.06 9.50 9.05 9.47 10.31 10.00 9.48
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
Specifications subject to change without notice. 49513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 15 TONS
RAS180 (RTPF)
Ambient Temperature85 95 105 115
EA (dB) EA (dB) EA (dB) EA (dB)75 80 85 75 80 85 75 80 85 75 80 85
4500 C
fm
EA
T (
wb
)
58THC 156.6 156.6 175.2 149.4 149.4 169.1 141.6 141.6 160.2 133.3 133.3 150.9SHC 134.7 154.9 175.2 129.8 149.4 169.1 123.0 141.6 160.2 115.7 133.3 150.9
62THC 166.7 166.7 166.9 158.0 158.0 162.6 147.6 147.6 157.2 136.8 136.8 150.3SHC 122.8 144.9 166.9 118.6 140.6 162.6 113.5 135.3 157.2 107.4 128.8 150.3
67THC 184.1 184.1 184.1 175.6 175.6 175.6 165.6 165.6 165.6 154.5 154.5 154.5SHC 101.6 123.7 145.7 98.1 120.2 142.3 94.0 116.1 138.2 89.4 111.5 133.6
72THC 200.3 200.3 200.3 192.0 192.0 192.0 182.9 182.9 182.9 172.2 172.2 172.2SHC 78.7 101.1 123.5 75.5 97.9 120.2 72.1 94.4 116.7 68.2 90.5 112.7
76THC - 211.4 211.4 - 203.1 203.1 - 193.8 193.8 - 183.9 183.9SHC - 82.2 107.0 - 79.3 103.8 - 76.0 100.2 - 72.6 96.5
5250 C
fm
EA
T (
wb
)
58THC 165.2 165.2 186.9 158.2 158.2 179.0 150.0 150.0 169.7 141.3 141.3 160.0SHC 143.5 165.2 186.9 137.4 158.2 179.0 130.2 150.0 169.7 122.7 141.3 160.0
62THC 172.3 172.3 181.7 163.4 163.4 176.9 153.1 153.1 169.3 143.4 143.4 161.4SHC 131.6 156.6 181.7 127.1 152.0 176.9 120.5 144.9 169.3 114.1 137.8 161.4
67THC 189.5 189.5 189.5 180.9 180.9 180.9 170.7 170.7 170.7 159.1 159.1 159.1SHC 107.2 132.4 157.5 103.8 129.0 154.1 99.9 125.1 150.4 95.3 120.6 145.8
72THC 205.0 205.0 205.0 196.5 196.5 196.5 187.1 187.1 187.1 176.4 176.4 176.4SHC 80.9 106.1 131.3 77.7 102.9 128.1 74.4 99.5 124.7 70.6 95.8 121.0
76THC - 215.4 215.4 - 206.8 206.8 - 197.1 197.1 - 186.9 186.9SHC - 85.0 113.0 - 82.0 109.8 - 78.8 106.4 - 75.4 102.8
6000 C
fm
EA
T (
wb
)
58THC 172.7 172.7 195.4 165.5 165.5 187.3 157.1 157.1 177.8 148.1 148.1 167.7SHC 150.0 172.7 195.4 143.8 165.5 187.3 136.4 157.1 177.8 128.6 148.1 167.7
62THC 176.6 176.6 195.7 168.1 168.1 187.6 158.9 158.9 180.2 148.9 148.9 172.1SHC 139.6 167.7 195.7 133.2 160.4 187.6 127.1 153.7 180.2 120.7 146.4 172.1
67THC 193.6 193.6 193.6 184.8 184.8 184.8 174.7 174.7 174.7 162.7 162.7 162.7SHC 112.3 140.3 168.3 108.9 137.0 165.2 105.2 133.5 161.7 100.7 129.0 157.3
72THC 208.4 208.4 208.4 199.6 199.6 199.6 190.2 190.2 190.2 179.5 179.5 179.5SHC 82.7 110.5 138.3 79.6 107.3 135.1 76.2 104.0 131.8 72.6 100.6 128.5
76THC - 218.2 218.2 - 209.5 209.5 - 199.5 199.5 - 189.0 189.0SHC - 87.5 118.6 - 84.5 115.2 - 81.1 111.3 - 77.5 107.3
6750 C
fm
EA
T (
wb
)
58THC 178.8 178.8 202.4 171.6 171.6 194.2 163.1 163.1 184.6 153.8 153.8 174.1SHC 155.3 178.8 202.4 149.0 171.6 194.2 141.6 163.1 184.6 133.5 153.8 174.1
62THC 181.0 181.0 203.6 173.0 173.0 197.5 163.8 163.8 190.1 153.9 153.9 181.1SHC 144.1 173.9 203.6 139.1 168.3 197.5 133.3 161.7 190.1 126.7 153.9 181.1
67THC 196.8 196.8 196.8 187.9 187.9 187.9 177.7 177.7 177.7 165.5 165.5 167.9SHC 117.0 147.7 178.4 113.7 144.5 175.4 110.1 141.1 172.2 105.6 136.8 167.9
72THC 211.0 211.0 211.0 202.2 202.2 202.2 192.5 192.5 192.5 181.8 181.8 181.8SHC 84.3 114.5 144.7 81.2 111.5 141.7 77.9 108.1 138.4 74.4 104.9 135.4
76THC - 220.2 220.2 - 211.5 211.5 - 201.3 201.3 - 190.6 190.6SHC - 89.5 122.8 - 86.4 119.4 - 83.0 115.4 - 79.4 111.5
7500 C
fm
EA
T (
wb
)
58THC 183.9 183.9 208.2 176.6 176.6 199.8 168.2 168.2 190.3 158.6 158.6 179.5SHC 159.7 183.9 208.2 153.3 176.6 199.8 146.0 168.2 190.3 137.7 158.6 179.5
62THC 185.1 185.1 212.5 177.1 177.1 206.2 168.3 168.3 197.9 158.7 158.7 186.7SHC 149.5 181.0 212.5 144.5 175.4 206.2 138.7 168.3 197.9 130.8 158.7 186.7
67THC 199.3 199.3 199.3 190.3 190.3 190.3 180.0 180.0 181.7 167.8 167.8 177.8SHC 121.3 154.6 187.9 118.1 151.6 185.1 114.4 148.1 181.7 110.1 144.0 177.8
72THC 213.0 213.0 213.0 204.1 204.1 204.1 194.2 194.2 194.2 183.5 183.5 183.5SHC 85.8 118.2 150.5 82.7 115.2 147.7 79.4 111.9 144.4 76.0 108.8 141.6
76THC - 221.9 221.9 - 213.0 213.0 - 202.7 202.7 - 191.8 191.8SHC - 91.2 126.5 - 88.2 123.1 - 84.7 119.2 - 81.2 115.3
* See Minimum−Maximum Airflow Ratings in Table 3. Do not operate outside these limits.LEGEND:− − Do not operate in this regionCfm − Cubic feet per minute (supply air)EAT(db) − Entering air temperature (dry bulb)EAT(wb) − Entering air temperature (wet bulb)SHC − Sensible heat capacityTC − Total capacity
Specifications subject to change without notice.50 513 21 3607 00
Table 6 − COOLING CAPACITIES (cont.) 2−STAGE COOLING 15 TONS
RAS180 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT IN SUBCOOLING MODE
TEMP (F) AIR ENTCONDENSER (Edb)
AIR ENTERING EVAPORATOR − CFM4500/0.02 6000/0.06 7500/0.05
Air Entering Evaporator − Ewb (F)72 67 62 72 67 62 72 67 62
75
TC 204.4 186.3 168.2 218.4 199.6 180.9 229.6 210.4 191.2SHC 98.9 118.1 137.2 114.8 133.7 152.6 127.6 146.2 164.9kW 11.57 11.22 10.77 11.78 11.45 11.00 12.06 11.64 11.35
85
TC 189.2 171.7 154.1 203.0 184.8 166.7 214.1 195.5 176.9SHC 79.5 103.4 127.3 96.5 120.2 144.0 110.2 133.7 157.3kW 12.59 12.24 11.81 12.81 12.50 12.03 13.05 12.66 12.47
95
TC 174.0 157.0 140.0 187.6 170.1 152.5 198.6 180.6 162.7SHC 60.0 88.7 117.5 78.2 106.8 135.3 92.9 121.3 149.7kW 13.68 13.35 12.86 13.91 13.57 13.05 14.15 13.75 13.47
105
TC 158.8 142.3 125.8 172.2 155.3 138.3 183.1 165.7 148.4SHC 40.5 74.1 107.7 59.9 93.3 126.7 75.5 108.8 142.0kW 14.67 14.41 13.88 14.90 14.55 14.10 15.15 14.73 14.53
115
TC 143.6 127.6 111.7 156.8 140.5 124.1 167.6 150.9 134.2SHC 21.0 59.4 97.8 41.6 79.9 118.1 58.1 96.3 134.2kW 15.77 15.38 14.88 15.88 15.65 15.10 16.12 15.84 15.54
RAS180 COOLING CAPACITIES, UNIT WITH HOT GAS RE−HEAT IN HOT GAS REHEAT MODE
TEMP (F) AIR ENTCONDENSER Edb)
AIR ENTERING EVAPORATOR − Ewb (F)
75 Dry Bulb62.5 Wet Bulb(50% Relative)
75 Dry Bulb64 Wet Bulb
(56% Relative)
75 Dry Bulb65.3 Wet Bulb(60% Relative)
Air Entering Evaporator − Cfm4500 6000 7500 4500 6000 7500 4500 6000 7500
80
TC 83.75 84.85 88.95 86.65 91.90 92.90 87.90 91.75 96.30SHC 37.50 42.80 55.10 30.90 40.40 44.50 24.80 29.30 34.10kW 10.50 11.49 11.60 10.56 10.65 11.70 11.60 11.72 11.77
75
TC 85.00 86.00 90.50 88.05 93.60 94.65 89.20 93.45 97.85SHC 40.00 45.00 57.30 33.20 42.30 46.90 26.90 31.50 36.30kW 10.16 11.15 11.25 10.21 10.31 11.33 11.26 11.35 11.42
70
TC 86.15 87.35 91.50 89.20 94.30 96.10 90.40 94.10 98.95SHC 42.10 47.50 59.80 35.50 45.30 49.50 29.50 33.90 38.70kW 9.84 10.83 10.94 10.02 10.13 11.03 10.95 11.05 11.12
60
TC 88.90 90.10 94.25 92.00 97.10 98.20 93.20 96.90 101.75SHC 46.80 52.30 64.60 40.20 50.10 54.10 34.10 38.60 43.40kW 9.37 10.36 10.44 9.42 9.52 10.55 10.45 10.57 10.64
50
TC 91.70 92.80 97.00 94.80 99.90 101.00 96.10 99.70 104.20SHC 51.50 57.10 69.40 44.80 54.80 58.90 38.70 43.20 49.00kW 9.12 10.09 10.16 9.17 9.28 10.26 10.17 10.26 10.32
40
TC 94.45 95.60 99.80 97.45 102.55 103.70 98.65 102.35 107.00SHC 56.30 61.40 73.70 49.70 59.20 63.30 43.60 48.10 52.90
kW 9.05 10.02 10.10 9.10 9.21 10.18 10.11 10.20 10.26
LEGENDEdb − Entering Dry−BulbEwb − Entering Wet−BulbkW − Compressor Motor Power InputIdb − Leaving Dry−BulbIwb − Leaving Wet−BulbSHC − Sensible Heat Capacity (1000 Btuh) GrossTC − Total Capacity (1000 Btuh) Gross
Specifications subject to change without notice. 51513 21 3607 00
Table 7 – STATIC PRESSURE ADDERS (IN. WG) (FACTORY OPTIONS AND/OR ACCESSORIES)
Electric Heaters
3−6 TONSCFM 600 900 1200 1400 1600 1800 2000 2200 2400 2600
1 Electric Heater Module 0.03 0.05 0.07 0.09 0.09 0.10 0.11 0.11 0.12 0.132 Electric Heater Modules 0.13 0.15 0.16 0.16 0.16 0.17 0.17 0.17 0.18 0.18
7.5 − 12.5 TONS
CFM2250
2500
2750
3000
3250
3500
3750
4000
4250
4500
4750
5000
5250
5500
5750
6000
1 ElectricHeaterModule
0.03 0.04 0.04 0.05 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18
2 ElectricHeater
Modules0.04 0.05 0.05 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.15 0.16 0.17 0.19 0.20
15 TONCFM 2813 3125 3438 3750 4063 4375 4688 5000 5313 5625 5938 6250
Vertical - 1 ElectricHeater Module 0.01 0.01 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.03 0.03 0.04
Vertical - 2 ElectricHeater Modules 0.02 0.03 0.03 0.03 0.04 0.04 0.05 0.05 0.06 0.06 0.07 0.08
Horizontal - 1 ElectricHeater Module 0.03 0.03 0.04 0.04 0.05 0.05 0.06 0.06 0.07 0.07 0.08 0.09
Horizontal - 2 ElectricHeater Modules 0.02 0.03 0.03 0.04 0.04 0.04 0.05 0.05 0.06 0.06 0.07 0.08
Hot Gas Re−Heat
3−6 TonsCFM 1000 1250 1500 1750 2000 2250 2500 2750 3000
3 Tons 0.04 0.052 0.07 − − − − − −4 Tons − 0.106 0.138 0.172 0.21 − − − −5 Tons − − 0.138 0.172 0.21 0.252 0.30 − −6 Tons − − − 0.112 0.125 0.161 0.19 0.22 0.25
7.5−12.5 TonsCFM 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5250 5500 5750 6000
7.5 Tons 0.12 0.14 0.16 0.19 0.21 0.23 0.26 − − − − − − − − −8.5 Tons − 0.11 0.12 0.13 0.15 0.17 0.18 0.20 0.22 − − − − − − −10 Tons − − − 0.13 0.15 0.17 0.18 0.20 0.22 0.24 0.26 0.28 − − − −
12.5 Tons − − − − − 0.17 0.18 0.20 0.22 0.24 0.26 0.28 0.31 0.33 0.36 0.39
15 TONSCFM 4000 4250 4500 4750 5000 5250 5500 5750 6000 6250 6500 6750 7000 7250
15 Tons 0.06 0.07 0.07 0.08 0.08 0.09 0.10 0.10 0.11 0.12 0.12 0.13 0.14 0.15
Specifications subject to change without notice.52 513 21 3607 00
ECONOMIZER, BAROMETRIC RELIEF AND PE PERFORMANCE
Vertical Application
0
500
1000
1500
2000
2500
3000
0.0 0.1 0.2
RE
TU
RN
AIR
FLO
W (
CFM
)
RETURN DUCT STATIC PRESSURE DROP (in. wg)
VERTICAL ECONOMIZER
3-6 TON
C11238
Fig. 16 − Return Air Pressure Drop
0
1000
2000
3000
4000
5000
6000
0.0 0.1 0.2 0.3 0.4 0.5
RE
TU
RN
AIR
FLO
W (
CFM
)
VERTICAL ECONOMIZER
RETURN DUCT STATIC PRESSURE DROP (in. wg)7.5 - 12.5 TON
C11240
Fig. 17 − Return Air Pressure Drop
2,800
3,300
3,800
4,300
4,800
5,300
5,800
6,300
6,800
7,300
0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08
RE
TU
RN
AIR
LO
W (
CE
M)
RETURN DUCT STATIC PRESSURE DROP (in. wg)
VERTICAL ECONOMIZER STATIC PRESSURE ADDER
C11257
Fig. 18 − Return Air Pressure Drop−Vertical 15 Tons
0
500
1000
1500
2000
2500
0 0.05 0.1 0.15 0.2 0.25 0.3RETURN DUCT STATIC PRESSURE (in. wg)
RE
LIE
F FL
OW
(CFM
)
3 -6 Ton7½ - 12½ Ton
Vertical Economizers
C08073
Fig. 19 − Barometric Relief Flow Capacity
0
500
1000
1500
2000
2500
0 0.05 0.1 0.15 0.2 0.25 0.3
RE
LIE
F FL
OW
(CFM
)
RETURN DUCT STATIC PRESSURE (in. wg)
15 -Ton
Vertical Economizers
C101122
Fig. 20 − Barometric Relief Flow−Vertical 15 Ton
0
1000
2000
3000
4000
5000
0 0.1 0.2 0.3 0.4 0.5
RETURN DUCT STATIC PRESSURE (in. wg)
EXH
AU
ST A
IRFL
OW
(cfm
)
Vertical Power Exhaust
3 - 6 Ton
7.5 - 15 Ton
C11248
Fig. 21 − Vertical Power Exhaust Performance
Specifications subject to change without notice. 53513 21 3607 00
ECONOMIZER, BAROMETRIC RELIEF AND PE PERFORMANCE (cont.)
Horizontal Application
0
500
1000
1500
2000
2500
3000
0.0 0.1 0.2
RE
TU
RN
AIR
FLO
W (
CFM
)
RETURN DUCT STATIC PRESSURE DROP (in. wg)
HORIZONTAL ECONOMIZER
3 - 6 TON
C11239
Fig. 22 − Return Air Pressure Drop
0
1000
2000
3000
4000
5000
6000
0.0 0.1 0.2 0.3 0.4 0.5 0.6
RE
TU
RN
AIR
FLO
W (
CFM
)
HORIZONTAL ECONOMIZER
RETURN DUCT STATIC PRESSURE DROP (in. wg)7.5 - 12.5 TON
C11241
Fig. 23 − Return Air Pressure Drop
2,800
3,300
3,800
4,300
4,800
5,300
5,800
6,300
6,800
7,300
0.05 0.15 0.25 0.35 0.45
RE
TU
RN
AIR
LO
W (
CFM
)
RETURN DUCT STATIC PRESSURE DROP (in. wg)
HORIZONTAL ECONOMIZER STATIC PRESSURE ADDER
C11258
Fig. 24 − Return Air Pressure Drop−Horizontal 15 Ton
0
500
1000
1500
2000
2500
0 0.05 0.1 0.15 0.2 0.25 0.3RETURN DUCT STATIC PRESSURE (in. wg)
RE
LIE
F FL
OW
(CFM
)
3 -6 Ton7½ - 12½ Ton
Horizontal Economizers
C08070
Fig. 25 − Barometric Relief Flow Capacity
0
500
1000
1500
2000
2500
0 0.05 0.1 0.15 0.2 0.25 0.3
RE
LIE
F FL
OW
(CFM
)
RETURN DUCT STATIC PRESSURE (in. wg)
15 -Ton
Horizontal Economizers
C101120
Fig. 26 − Barometric Relief Flow−Horizontal 15 Ton
0
500
1000
1500
2000
2500
0 0.1 0.2 0.3 0.4 0.5
EXH
AU
ST A
IRFL
OW
(cfm
)
RETURN DUCT STATIC PRESSURE (in. wg)
Horizontal Power Exhaust
3 - 15 TON
C08012
Fig. 27 − Horizontal Power Exhaust Performance
Specifications subject to change without notice.54 513 21 3607 00
GENERAL FAN PERFORMANCE NOTES1. Interpolation is permissible. Do not extrapolate.2. External static pressure is the static pressure difference between the return duct and the supply duct plus the
static pressure caused by any FIOPs or accessories.3. Tabular data accounts for pressure loss due to clean filters, unit casing, and wet coils. Factory options and
accessories may add static pressure losses. Selection software is available, through your salesperson, to helpyou select the best motor/drive combination for your application.
4. The Fan Performance tables offer motor/drive recommendations. In cases when two motor/drive combinationswould work, ICP recommended the lower horsepower option.
5. For information on the electrical properties of ICP motors, please see the Electrical information section of thisbook.
6. For more information on the performance limits of ICP motors, see the application data section of this book.7. The EPACT (Energy Policy Act of 1992) regulates energy requirements for specific types of indoor fan mo-
tors. Motors regulated by EPACT include any general purpose, T−frame (three−digit, 143 and larger), single−speed, foot mounted, polyphase, squirrel cage induction motors of NEMA (National Electrical ManufacturersAssociation) design A and B, manufactured for use in the United States. Ranging from 1 to 200 Hp, thesecontinuous−duty motors operate on 230 and 460 volt, 60 Hz power. If a motor does not fit into these specifica-tions, the motor does not have to be replaced by an EPACT compliant energy−efficient motor. Variable−speedmotors are exempt from EPACT compliance requirements. Therefore, the indoor fan motors for ICPRAS036−180 units are exempt from these requirements.
Specifications subject to change without notice. 55513 21 3607 00
FAN PERFORMANCETable 8 – RAS036 1 PHASE 3 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Field Supplied Drive1 Standard Static Option Medium Static Option900 554 0.14 681 0.22 783 0.32 870 0.42 947 0.53
975 575 0.16 701 0.25 801 0.35 888 0.45 965 0.57
1050 597 0.18 721 0.28 821 0.38 906 0.49 983 0.61
1125 620 0.21 741 0.31 840 0.42 925 0.54 1001 0.66
1200 643 0.23 762 0.35 860 0.46 944 0.58 1020 0.71
1275 666 0.27 784 0.38 880 0.50 964 0.63 1039 0.76
1350 690 0.30 805 0.42 900 0.55 983 0.68 1058 0.82
1425 714 0.34 827 0.47 921 0.60 1003 0.74 1077 0.88
1500 738 0.38 849 0.52 942 0.66 1024 0.80 1097 0.95
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option Field Supplied Drive2
900 1017 0.64 1082 0.76 1143 0.88 1200 1.01 1254 1.14
975 1035 0.68 1100 0.81 1160 0.93 1217 1.07 1271 1.20
1050 1053 0.73 1117 0.86 1177 0.99 1234 1.13 - -
1125 1071 0.78 1135 0.92 1195 1.05 1251 1.19 - -
1200 1089 0.84 1153 0.98 1212 1.12 - - - -
1275 1107 0.90 1171 1.04 1230 1.19 - - - -
1350 1126 0.96 1189 1.11 - - - - - -
1425 1145 1.03 1208 1.18 - - - - - -
1500 1164 1.10 - - - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS036 1 PHASE 3 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Field Supplied Drive1 Standard Static Option Medium Static Option900 566 0.14 690 0.23 791 0.32 879 0.42 957 0.52
975 590 0.17 711 0.26 811 0.36 897 0.46 975 0.57
1050 615 0.19 733 0.29 831 0.39 916 0.50 993 0.62
1125 640 0.22 755 0.33 851 0.43 936 0.55 1012 0.67
1200 666 0.25 778 0.36 873 0.48 956 0.60 1031 0.72
1275 692 0.29 802 0.41 894 0.53 976 0.65 1051 0.78
1350 719 0.33 825 0.45 916 0.58 997 0.71 1071 0.84
1425 746 0.37 850 0.50 939 0.63 1019 0.77 1091 0.91
1500 774 0.42 875 0.55 962 0.69 1041 0.83 1112 0.98
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option Field Supplied Drive2
900 1029 0.63 1095 0.75 1157 0.86 1216 0.99 1272 1.11
975 1046 0.68 1112 0.80 1174 0.92 1232 1.05 1287 1.18
1050 1064 0.73 1129 0.86 1190 0.98 1248 1.11 - -
1125 1082 0.79 1147 0.92 1208 1.05 1265 1.18 - -
1200 1100 0.85 1165 0.98 1225 1.12 - - - -
1275 1119 0.91 1183 1.05 1243 1.19 - - - -
1350 1139 0.98 1202 1.12 - - - - - -
1425 1159 1.05 1221 1.20 - - - - - -
1500 1179 1.13 - - - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice.56 513 21 3607 00
FAN PERFORMANCE (cont.)
Table 8 (cont.) RAS036 3 PHASE 3 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Field Supplied Drive1 Standard Static Option Medium Static Option900 554 0.14 681 0.22 783 0.32 870 0.42 947 0.53
975 575 0.16 701 0.25 801 0.35 888 0.45 965 0.57
1050 597 0.18 721 0.28 821 0.38 906 0.49 983 0.61
1125 620 0.21 741 0.31 840 0.42 925 0.54 1001 0.66
1200 643 0.23 762 0.35 860 0.46 944 0.58 1020 0.71
1275 666 0.27 784 0.38 880 0.50 964 0.63 1039 0.76
1350 690 0.30 805 0.42 900 0.55 983 0.68 1058 0.82
1425 714 0.34 827 0.47 921 0.60 1003 0.74 1077 0.88
1500 738 0.38 849 0.52 942 0.66 1024 0.80 1097 0.95
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option High Static Option900 1017 0.64 1082 0.76 1143 0.88 1200 1.01 1254 1.14
975 1035 0.68 1100 0.81 1160 0.93 1217 1.07 1271 1.20
1050 1053 0.73 1117 0.86 1177 0.99 1234 1.13 1288 1.27
1125 1071 0.78 1135 0.92 1195 1.05 1251 1.19 1305 1.34
1200 1089 0.84 1153 0.98 1212 1.12 1269 1.26 1322 1.41
1275 1107 0.90 1171 1.04 1230 1.19 1286 1.33 1340 1.49
1350 1126 0.96 1189 1.11 1249 1.26 1304 1.41 1357 1.57
1425 1145 1.03 1208 1.18 1267 1.33 1323 1.49 1375 1.66
1500 1164 1.10 1227 1.25 1285 1.41 1341 1.58 1394 1.75
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS036 3 PHASE 3 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Field Supplied Drive1 Standard Static Option Medium Static Option900 566 0.14 690 0.23 791 0.32 879 0.42 957 0.52
975 590 0.17 711 0.26 811 0.36 897 0.46 975 0.57
1050 615 0.19 733 0.29 831 0.39 916 0.50 993 0.62
1125 640 0.22 755 0.33 851 0.43 936 0.55 1012 0.67
1200 666 0.25 778 0.36 873 0.48 956 0.60 1031 0.72
1275 692 0.29 802 0.41 894 0.53 976 0.65 1051 0.78
1350 719 0.33 825 0.45 916 0.58 997 0.71 1071 0.84
1425 746 0.37 850 0.50 939 0.63 1019 0.77 1091 0.91
1500 774 0.42 875 0.55 962 0.69 1041 0.83 1112 0.98
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option High Static Option900 1029 0.63 1095 0.75 1157 0.86 1216 0.99 1272 1.11
975 1046 0.68 1112 0.80 1174 0.92 1232 1.05 1287 1.18
1050 1064 0.73 1129 0.86 1190 0.98 1248 1.11 1304 1.25
1125 1082 0.79 1147 0.92 1208 1.05 1265 1.18 1320 1.32
1200 1100 0.85 1165 0.98 1225 1.12 1282 1.26 1337 1.40
1275 1119 0.91 1183 1.05 1243 1.19 1300 1.34 1354 1.49
1350 1139 0.98 1202 1.12 1262 1.27 1318 1.42 1372 1.57
1425 1159 1.05 1221 1.20 1280 1.35 1336 1.51 1390 1.66
1500 1179 1.13 1241 1.28 1300 1.44 1355 1.60 1408 1.76
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice. 57513 21 3607 00
FAN PERFORMANCE (cont.)
Table 8 (cont.) RAS048 1 PHASE 4 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option Medium Static Option1200 643 0.23 762 0.35 860 0.46 944 0.58 1020 0.71
1300 674 0.28 791 0.40 887 0.52 970 0.65 1045 0.78
1400 706 0.33 820 0.45 914 0.59 997 0.72 1071 0.86
1500 738 0.38 849 0.52 942 0.66 1024 0.80 1097 0.95
1600 771 0.44 879 0.59 971 0.74 1051 0.89 1124 1.04
1700 804 0.51 910 0.66 1000 0.82 1079 0.98 1151 1.14
1800 837 0.59 941 0.75 1029 0.91 1107 1.08 - -
1900 871 0.67 972 0.84 1059 1.02 1136 1.19 - -
2000 906 0.76 1004 0.94 1089 1.12 - - - -
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option Field Supplied Drive1
1200 1089 0.84 1153 0.98 1212 1.12 - - - -
1300 1114 0.92 1177 1.06 - - - - - -
1400 1139 1.01 1202 1.15 - - - - - -
1500 1164 1.10 - - - - - - - -
1600 1190 1.20 - - - - - - - -
1700 - - - - - - - - - -
1800 - - - - - - - - - -
1900 - - - - - - - - - -
2000 - - - - - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS048 1 PHASE 4 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option Medium Static Option1200 666 0.25 778 0.36 873 0.48 956 0.60 1031 0.72
1300 701 0.30 809 0.42 902 0.54 983 0.67 1057 0.80
1400 737 0.36 842 0.48 932 0.61 1012 0.75 1085 0.89
1500 774 0.42 875 0.55 962 0.69 1041 0.83 1112 0.98
1600 811 0.49 909 0.63 994 0.78 1071 0.93 1141 1.08
1700 849 0.57 943 0.72 1026 0.87 1101 1.03 1170 1.19
1800 887 0.65 978 0.81 1059 0.98 1133 1.14 - -
1900 926 0.75 1014 0.92 1092 1.09 1164 1.26 - -
2000 965 0.86 1050 1.03 1127 1.21 - - - -
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option Field Supplied Drive1
1200 1100 0.85 1165 0.98 1225 1.12 - - - -
1300 1126 0.94 1189 1.07 - - - - - -
1400 1152 1.03 1215 1.17 - - - - - -
1500 1179 1.13 - - - - - - - -
1600 - - - - - - - - - -
1700 - - - - - - - - - -
1800 - - - - - - - - - -
1900 - - - - - - - - - -
2000 - - - - - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice.58 513 21 3607 00
FAN PERFORMANCE (cont.)
Table 8 (cont.) RAS048 3 PHASE 4 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option Medium Static Option1200 643 0.23 762 0.35 860 0.46 944 0.58 1020 0.71
1300 674 0.28 791 0.40 887 0.52 970 0.65 1045 0.78
1400 706 0.33 820 0.45 914 0.59 997 0.72 1071 0.86
1500 738 0.38 849 0.52 942 0.66 1024 0.80 1097 0.95
1600 771 0.44 879 0.59 971 0.74 1051 0.89 1124 1.04
1700 804 0.51 910 0.66 1000 0.82 1079 0.98 1151 1.14
1800 837 0.59 941 0.75 1029 0.91 1107 1.08 1178 1.25
1900 871 0.67 972 0.84 1059 1.02 1136 1.19 1206 1.37
2000 906 0.76 1004 0.94 1089 1.12 1165 1.31 1234 1.49
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option High Static Option1200 1089 0.84 1153 0.98 1212 1.12 1269 1.26 1322 1.41
1300 1114 0.92 1177 1.06 1236 1.21 1292 1.36 1346 1.52
1400 1139 1.01 1202 1.15 1261 1.31 1316 1.47 1369 1.63
1500 1164 1.10 1227 1.25 1285 1.41 1341 1.58 1394 1.75
1600 1190 1.20 1252 1.36 1311 1.53 1366 1.70 1418 1.87
1700 1217 1.31 1278 1.48 1336 1.65 1391 1.83 1443 2.01
1800 1244 1.42 1305 1.60 1362 1.78 1416 1.97 1468 2.15
1900 1271 1.55 1331 1.73 1388 1.92 1442 2.11 1494 2.31
2000 1298 1.68 1358 1.87 1415 2.07 1468 2.27 - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS048 3 PHASE 4 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option Medium Static Option1200 666 0.25 778 0.36 873 0.48 956 0.60 1031 0.72
1300 701 0.30 809 0.42 902 0.54 983 0.67 1057 0.80
1400 737 0.36 842 0.48 932 0.61 1012 0.75 1085 0.89
1500 774 0.42 875 0.55 962 0.69 1041 0.83 1112 0.98
1600 811 0.49 909 0.63 994 0.78 1071 0.93 1141 1.08
1700 849 0.57 943 0.72 1026 0.87 1101 1.03 1170 1.19
1800 887 0.65 978 0.81 1059 0.98 1133 1.14 1200 1.31
1900 926 0.75 1014 0.92 1092 1.09 1164 1.26 1231 1.44
2000 965 0.86 1050 1.03 1127 1.21 1197 1.39 1262 1.58
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
High Static Option High Static Option1200 1100 0.85 1165 0.98 1225 1.12 1282 1.26 1337 1.40
1300 1126 0.94 1189 1.07 1249 1.22 1306 1.36 1360 1.51
1400 1152 1.03 1215 1.17 1274 1.32 1330 1.48 1384 1.63
1500 1179 1.13 1241 1.28 1300 1.44 1355 1.60 1408 1.76
1600 1206 1.24 1268 1.40 1326 1.56 1381 1.73 1433 1.90
1700 1235 1.36 1295 1.52 1352 1.69 1407 1.87 1459 2.04
1800 1264 1.48 1323 1.66 1380 1.84 1434 2.02 1485 2.20
1900 1293 1.62 1352 1.80 1408 1.99 1461 2.17 1512 2.37
2000 1324 1.77 1381 1.96 1436 2.15 1489 2.34 - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice. 59513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS060 1 PHASE 5 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option
1500 724 0.33 837 0.45 937 0.59 1028 0.74 1111 0.911625 765 0.40 873 0.53 969 0.67 1056 0.83 1137 1.001750 806 0.48 909 0.61 1002 0.76 1087 0.92 1165 1.101875 849 0.57 947 0.71 1036 0.86 1118 1.03 1195 1.212000 892 0.67 986 0.82 1072 0.98 1151 1.15 1226 1.332125 935 0.79 1025 0.94 1108 1.11 1185 1.29 1258 1.472250 980 0.92 1066 1.08 1146 1.25 1220 1.43 − −2375 1024 1.06 1107 1.23 1184 1.41 − − − −2500 1069 1.22 1149 1.39 − − − − − −
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option1500 1188 1.09 1261 1.29 1330 1.49 - - - -
1625 1213 1.18 1284 1.38 - - - - - -
1750 1239 1.28 1309 1.49 - - - - - -
1875 1267 1.40 - - - - - - - -
2000 - - - - - - - - - -
2125 - - - - - - - - - -
2250 - - - - - - - - - -
2375 - - - - - - - - - -
2500 - - - - - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS060 1 PHASE 5 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option1500 790 0.40 897 0.53 991 0.68 1075 0.83 1152 1.00
1625 837 0.48 940 0.62 1030 0.77 1112 0.94 1187 1.11
1750 885 0.58 983 0.73 1070 0.89 1150 1.06 1223 1.24
1875 934 0.69 1027 0.85 1112 1.01 1189 1.19 1260 1.38
2000 983 0.81 1073 0.98 1154 1.16 1229 1.34 - -
2125 1033 0.95 1119 1.13 1198 1.31 1270 1.50 - -
2250 1084 1.11 1166 1.29 1242 1.49 - - - -
2375 1134 1.28 1214 1.48 - - - - - -
2500 1185 1.48 - - - - - - - -
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option1500 1224 1.18 1291 1.36 - - - - - -
1625 1257 1.30 1323 1.49 - - - - - -
1750 1292 1.43 - - - - - - - -
1875 - - - - - - - - - -
2000 - - - - - - - - - -
2125 - - - - - - - - - -
2250 - - - - - - - - - -
2375 - - - - - - - - - -
2500 - - - - - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice.60 513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS060 3 PHASE 5 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option
1500 724 0.33 837 0.45 937 0.59 1028 0.74 1111 0.911625 765 0.40 873 0.53 969 0.67 1056 0.83 1137 1.001750 806 0.48 909 0.61 1002 0.76 1087 0.92 1165 1.101875 849 0.57 947 0.71 1036 0.86 1118 1.03 1195 1.212000 892 0.67 986 0.82 1072 0.98 1151 1.15 1226 1.332125 935 0.79 1025 0.94 1108 1.11 1185 1.29 1258 1.472250 980 0.92 1066 1.08 1146 1.25 1220 1.43 1291 1.632375 1024 1.06 1107 1.23 1184 1.41 1256 1.60 1325 1.792500 1069 1.22 1149 1.39 1223 1.58 1293 1.77 1360 1.98
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option1500 1188 1.09 1261 1.29 1330 1.49 1395 1.71 1457 1.95
1625 1213 1.18 1284 1.38 1352 1.59 1416 1.81 1478 2.04
1750 1239 1.28 1309 1.49 1375 1.70 1439 1.92 1499 2.16
1875 1267 1.40 1335 1.60 1400 1.82 1462 2.04 1522 2.28
2000 1296 1.53 1363 1.74 1427 1.95 1488 2.18 1546 2.42
2125 1326 1.67 1392 1.88 1454 2.11 1514 2.34 1571 2.58
2250 1358 1.83 1421 2.05 1483 2.27 1541 2.51 1598 2.75
2375 1390 2.00 1452 2.22 1512 2.45 1570 2.69 - -
2500 1424 2.19 1484 2.42 1543 2.65 1599 2.89 - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS060 3 PHASE 5 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option1500 790 0.40 897 0.53 991 0.68 1075 0.83 1152 1.00
1625 837 0.48 940 0.62 1030 0.77 1112 0.94 1187 1.11
1750 885 0.58 983 0.73 1070 0.89 1150 1.06 1223 1.24
1875 934 0.69 1027 0.85 1112 1.01 1189 1.19 1260 1.38
2000 983 0.81 1073 0.98 1154 1.16 1229 1.34 1299 1.53
2125 1033 0.95 1119 1.13 1198 1.31 1270 1.50 1338 1.71
2250 1084 1.11 1166 1.29 1242 1.49 1312 1.69 1386 1.89
2375 1134 1.28 1214 1.48 1287 1.68 1355 1.89 1420 2.10
2500 1185 1.48 1262 1.68 1333 1.89 1399 2.10 1462 2.33
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Medium Static Option High Static Option1500 1224 1.18 1291 1.36 1354 1.56 1414 1.77 1472 1.98
1625 1257 1.30 1323 1.49 1385 1.69 1445 1.90 1501 2.12
1750 1292 1.43 1356 1.63 1418 1.83 1476 2.05 1532 2.27
1875 1327 1.57 1391 1.78 1451 1.99 1509 2.21 1564 2.44
2000 1364 1.74 1427 1.95 1486 2.17 1542 2.39 1596 2.63
2125 1402 1.92 1463 2.13 1521 2.36 1577 2.59 1630 2.83
2250 1441 2.11 1501 2.34 1558 2.57 1612 2.81 - -
2375 1481 2.33 1539 2.56 1595 2.80 - - - -
2500 1522 2.56 1579 2.80 - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice. 61513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS072 3 PHASE 6 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Field Supplied Drive1 Standard Static Option1800 822 0.51 927 0.66 1018 0.82 1100 0.98 1174 1.15
1950 872 0.62 973 0.79 1061 0.95 1140 1.13 1213 1.31
2100 923 0.75 1019 0.92 1104 1.10 1182 1.29 1253 1.48
2250 974 0.90 1067 1.08 1149 1.27 1224 1.46 1294 1.66
2400 1026 1.06 1115 1.26 1195 1.46 1268 1.66 1336 1.87
2550 1079 1.25 1164 1.46 1241 1.67 1312 1.88 1379 2.10
2700 1132 1.46 1214 1.67 1289 1.90 1358 2.12 1422 2.35
2850 1186 1.69 1264 1.92 1336 2.15 1404 2.39 1467 2.63
3000 1240 1.94 1315 2.18 1385 2.43 1451 2.68 1512 2.93
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option Medium Static Option1800 1244 1.33 1308 1.51 1369 1.70 1427 1.90 1483 2.10
1950 1281 1.49 1345 1.68 1405 1.88 1462 2.09 1517 2.30
2100 1320 1.67 1382 1.87 1441 2.08 1498 2.29 1552 2.51
2250 1359 1.87 1420 2.08 1479 2.29 1534 2.51 1587 2.74
2400 1400 2.09 1460 2.31 1517 2.53 1572 2.76 1624 2.99
2550 1441 2.33 1500 2.55 1557 2.79 1610 3.03 1662 3.27
2700 1483 2.59 1541 2.83 1597 3.07 1650 3.32 1701 3.57
2850 1527 2.87 1583 3.12 1638 3.37 1690 3.63 - -
3000 1571 3.18 1626 3.44 1680 3.70 - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS072 3 PHASE 6 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Field Supplied Drive1 Standard Static Option1800 907 0.63 1006 0.80 1092 0.97 1169 1.14 1239 1.32
1950 965 0.77 1060 0.95 1143 1.13 1218 1.32 1287 1.51
2100 1024 0.93 1115 1.12 1195 1.32 1268 1.52 1335 1.72
2250 1083 1.11 1170 1.32 1248 1.53 1319 1.74 1385 1.96
2400 1143 1.32 1227 1.54 1302 1.76 1371 1.99 1435 2.22
2550 1203 1.55 1284 1.78 1357 2.02 1424 2.26 1487 2.50
2700 1264 1.81 1342 2.06 1412 2.31 1478 2.56 1539 2.82
2850 1326 2.09 1400 2.36 1469 2.62 1532 2.89 1592 3.16
3000 1387 2.41 1459 2.69 1525 2.97 1587 3.25 1646 3.53
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)
1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
Standard Static Option Medium Static Option High Static Option1800 1304 1.51 1365 1.69 1422 1.88 1477 2.08 1528 2.28
1950 1350 1.71 1410 1.91 1467 2.11 1520 2.31 1572 2.52
2100 1398 1.93 1457 2.14 1512 2.35 1565 2.57 1616 2.79
2250 1446 2.18 1504 2.40 1559 2.62 1611 2.85 1661 3.09
2400 1496 2.45 1552 2.68 1606 2.92 1658 3.16 1707 3.40
2550 1546 2.75 1601 2.99 1654 3.24 1705 3.50 - -
2700 1597 3.07 1651 3.33 1703 3.59 - - - -
2850 1648 3.43 1702 3.70 - - - - - -
3000 - - - - - - - - - -
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice.62 513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS090/91 3 PHASE 7.5 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option Medium Static Option
2250 465 0.43 555 0.64 629 0.86 694 1.10 753 1.342438 488 0.51 575 0.73 648 0.97 712 1.21 769 1.472625 510 0.60 595 0.84 666 1.09 729 1.34 786 1.622813 533 0.70 616 0.95 686 1.22 748 1.49 804 1.773000 557 0.82 637 1.08 705 1.36 766 1.64 822 1.943188 581 0.94 659 1.23 726 1.51 785 1.81 840 2.123375 606 1.08 681 1.38 746 1.68 805 2.00 859 2.323563 630 1.24 703 1.55 767 1.87 825 2.20 878 2.533750 655 1.41 726 1.74 789 2.07 845 2.41 897 2.76
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPMedium Static Option High Static Option
2250 806 1.60 856 1.87 903 2.15 947 2.45 988 2.752438 822 1.74 872 2.03 918 2.32 961 2.62 1003 2.932625 839 1.90 887 2.19 933 2.49 977 2.81 1018 3.132813 856 2.06 904 2.37 949 2.68 992 3.01 1033 3.343000 873 2.24 921 2.56 966 2.89 1008 3.22 1049 3.563188 891 2.44 938 2.77 982 3.10 1025 3.45 1065 3.813375 909 2.65 955 2.99 1000 3.34 1041 3.70 1081 4.063563 927 2.88 973 3.23 1017 3.59 1059 3.96 1098 4.343750 946 3.12 992 3.48 1035 3.86 1076 4.24 1115 4.632
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS090/91 3 PHASE 7.5 TON VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPStandard Static Option Medium Static Option
2250 511 0.53 591 0.73 660 0.95 722 1.19 779 1.442438 540 0.64 616 0.85 683 1.08 743 1.33 799 1.592625 569 0.76 642 0.99 706 1.23 765 1.49 819 1.762813 599 0.90 669 1.14 731 1.39 788 1.66 841 1.943000 630 1.06 696 1.31 756 1.58 811 1.86 863 2.153188 661 1.23 724 1.50 782 1.78 836 2.07 886 2.383375 692 1.43 753 1.71 809 2.00 861 2.31 910 2.623563 723 1.65 782 1.94 836 2.25 887 2.56 934 2.893750 755 1.89 811 2.20 864 2.52 913 2.84 959 3.18
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPMedium Static Option High Static Option
2250 832 1.71 882 1.99 928 2.29 973 2.59 1015 2.922438 851 1.87 899 2.16 945 2.46 989 2.78 1031 3.112625 870 2.04 918 2.34 963 2.66 1006 2.98 1048 3.322813 890 2.24 937 2.55 982 2.87 1024 3.21 1065 3.553000 912 2.46 958 2.78 1001 3.11 1043 3.45 1083 3.803188 934 2.69 979 3.02 1022 3.36 1063 3.72 1102 4.083375 956 2.95 1000 3.29 1042 3.64 1083 4.00 1122 4.383563 980 3.23 1023 3.58 1064 3.94 1104 4.32 1142 4.703750 1004 3.54 1046 3.90 1086 4.27 1125 4.65 − −
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice. 63513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS101/102 3 PHASE 8.5 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option
2550 438 0.39 523 0.50 595 0.64 658 0.78 716 0.942763 459 0.47 541 0.60 611 0.73 673 0.88 730 1.052975 481 0.56 560 0.70 628 0.84 689 1.00 745 1.163188 504 0.67 580 0.82 646 0.97 705 1.13 760 1.303400 526 0.80 600 0.95 664 1.11 722 1.27 776 1.453613 550 0.94 620 1.10 683 1.26 740 1.43 793 1.623825 573 1.09 641 1.26 702 1.43 758 1.61 810 1.804038 597 1.26 663 1.44 722 1.62 777 1.81 827 2.004250 621 1.45 685 1.64 743 1.83 796 2.02 845 2.22
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPMedium Static Option High Static Option
2550 769 1.11 819 1.30 865 1.49 909 1.70 951 1.922763 782 1.22 831 1.41 877 1.60 921 1.81 963 2.042975 796 1.34 845 1.53 890 1.73 933 1.94 974 2.163188 811 1.48 858 1.67 903 1.88 946 2.09 987 2.313400 826 1.63 873 1.83 917 2.04 959 2.25 1000 2.483613 842 1.81 888 2.01 932 2.22 973 2.44 1013 2.673825 858 2.00 903 2.20 946 2.42 988 2.64 1027 2.874038 875 2.20 919 2.41 962 2.63 1002 2.86 1041 3.104250 892 2.43 936 2.65 978 2.87 1018 3.10 1056 3.34
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS101/102 3 PHASE 8.5 VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option Medium Static Option
2550 477 0.43 556 0.57 624 0.71 685 0.85 742 0.992763 503 0.52 578 0.67 644 0.82 704 0.97 759 1.132975 529 0.62 601 0.79 665 0.95 724 1.11 777 1.283188 556 0.74 625 0.92 687 1.09 744 1.26 796 1.443400 583 0.88 650 1.06 710 1.24 765 1.43 816 1.623613 611 1.03 675 1.22 733 1.42 787 1.61 836 1.813825 639 1.19 701 1.40 757 1.61 809 1.81 857 2.024038 668 1.38 727 1.60 781 1.81 832 2.03 879 2.254250 696 1.58 753 1.81 806 2.04 855 2.27 901 2.50
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPMedium Static Option High Static Option
2550 794 1.14 842 1.29 888 1.44 932 1.59 973 1.752763 810 1.28 858 1.44 903 1.60 946 1.77 987 1.932975 827 1.44 874 1.61 919 1.78 961 1.95 1001 2.133188 845 1.62 891 1.79 935 1.98 977 2.16 1017 2.343400 864 1.80 909 1.99 952 2.18 993 2.38 1033 2.573613 883 2.01 928 2.21 970 2.41 1010 2.61 1049 2.823825 903 2.23 947 2.44 988 2.65 1028 2.87 1066 3.084038 924 2.47 967 2.70 1008 2.92 1047 3.14 1084 3.374250 945 2.73 987 2.97 1027 3.20 1066 3.43 1103 3.672
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice.64 513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS120/121 3 PHASE 10 TON HORIZONTAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option
3000 523 0.58 592 0.73 657 0.88 718 1.05 775 1.223250 555 0.71 620 0.87 681 1.04 739 1.21 794 1.393500 588 0.86 649 1.03 707 1.21 762 1.39 815 1.583750 621 1.03 679 1.21 734 1.40 786 1.59 837 1.794000 655 1.23 709 1.42 761 1.61 812 1.82 860 2.034250 689 1.45 741 1.65 790 1.86 838 2.07 885 2.294500 723 1.69 773 1.90 820 2.12 866 2.35 910 2.574750 758 1.96 805 2.19 850 2.42 894 2.65 937 2.895000 793 2.26 838 2.50 881 2.74 923 2.98 965 3.23
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPStandard Static Opt. Medium Static Option
3000 830 1.39 883 1.57 934 1.76 982 1.95 1029 2.143250 847 1.57 897 1.76 946 1.96 993 2.16 1039 2.363500 865 1.77 914 1.97 961 2.18 1007 2.38 1051 2.603750 885 1.99 932 2.20 978 2.42 1022 2.64 1065 2.864000 907 2.24 952 2.46 996 2.68 1038 2.91 1080 3.144250 930 2.51 973 2.74 1015 2.97 1057 3.21 1097 3.454500 954 2.81 996 3.05 1037 3.29 1076 3.54 1115 3.794750 979 3.13 1019 3.38 1059 3.63 1097 3.89 1135 4.155000 1005 3.49 1044 3.74 1082 4.01 1119 4.27 1156 4.55
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS120/121 3 PHASE 10 VERTICAL SUPPLY
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option
3000 556 0.65 623 0.80 684 0.95 738 1.11 789 1.263250 590 0.79 655 0.96 713 1.13 766 1.29 815 1.463500 625 0.96 687 1.14 742 1.32 794 1.50 841 1.683750 661 1.16 719 1.35 773 1.54 822 1.73 869 1.934000 697 1.37 753 1.58 804 1.79 852 1.99 897 2.204250 733 1.62 787 1.84 836 2.06 883 2.28 926 2.494500 770 1.89 821 2.13 869 2.36 914 2.59 956 2.824750 807 2.20 856 2.45 902 2.69 945 2.94 986 3.185000 844 2.54 891 2.80 936 3.06 978 3.31 1018 3.57
CFM
AVAILABLE EXTERNAL STATIC PRESSURE (IN. WG)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPMedium Static Option
3000 836 1.42 881 1.57 923 1.73 963 1.89 1001 2.053250 861 1.63 904 1.79 945 1.96 985 2.13 1023 2.303500 886 1.86 929 2.04 969 2.22 1008 2.40 1045 2.583750 912 2.12 954 2.31 994 2.50 1031 2.70 1068 2.894000 940 2.40 980 2.61 1019 2.81 1056 3.02 1092 3.224250 968 2.71 1007 2.93 1045 3.15 1081 3.36 1117 3.584500 996 3.05 1035 3.28 1072 3.51 1108 3.74 1142 3.974750 1026 3.42 1063 3.66 1100 3.91 1135 4.15 1168 4.395000 1056 3.82 1093 4.08 1128 4.34 1162 4.59 − −
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice. 65513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS150 3 PHASE 12.5 TON HORIZONTAL SUPPLY
CFM
Available External Static Pressure (in. wg)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option
3438 580 0.82 642 0.99 700 1.16 756 1.34 809 1.533750 621 1.03 679 1.21 734 1.40 786 1.59 837 1.794063 663 1.28 717 1.47 769 1.67 818 1.88 866 2.094375 706 1.56 757 1.77 805 1.98 852 2.20 897 2.434688 749 1.89 797 2.11 843 2.34 887 2.57 930 2.815000 793 2.26 838 2.50 881 2.74 923 2.98 965 3.235313 837 2.69 880 2.93 921 3.19 961 3.44 1000 3.715625 882 3.16 922 3.42 961 3.68 999 3.95 1037 4.235938 926 3.68 964 3.96 1001 4.23 1038 4.52 − −6250 971 4.26 1007 4.55 − − − − − −
CFM
Available External Static Pressure (in. wg)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPMedium Static Option
3438 860 1.72 910 1.92 957 2.12 1003 2.32 1048 2.543750 885 1.99 932 2.20 978 2.42 1022 2.64 1065 2.864063 912 2.31 957 2.53 1001 2.75 1043 2.98 1084 3.224375 941 2.66 984 2.89 1026 3.13 1066 3.37 1106 3.624688 972 3.05 1013 3.29 1053 3.54 1092 3.80 1130 4.065000 1005 3.49 1044 3.74 1082 4.01 1119 4.27 1156 4.555313 1038 3.97 1076 4.24 1113 4.52 − − − −5625 1073 4.51 − − − − − − − −5938 − − − − − − − − − −6250 − − − − − − − − − −
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Table 8 (cont.) RAS150 3 PHASE 12.5 TON VERTICAL SUPPLY
CFM
Available External Static Pressure (in. wg)0.2 0.4 0.6 0.8 1.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPField Supplied Drive1 Standard Static Option
3438 616 0.92 679 1.10 735 1.27 786 1.45 835 1.623750 661 1.16 719 1.35 773 1.54 822 1.73 869 1.934063 706 1.43 761 1.64 812 1.85 860 2.06 904 2.274375 752 1.75 804 1.98 852 2.20 898 2.43 941 2.654688 798 2.12 847 2.36 894 2.60 937 2.85 979 3.095000 844 2.54 891 2.80 936 3.06 978 3.31 1018 3.575313 891 3.01 936 3.28 978 3.56 1019 3.83 1057 4.115625 938 3.53 981 3.83 1022 4.12 1060 4.41 1097 4.705938 986 4.12 1026 4.43 − − − − − −6250 − − − − − − − − − −
CFM
Available External Static Pressure (in. wg)1.2 1.4 1.6 1.8 2.0
RPM BHP RPM BHP RPM BHP RPM BHP RPM BHPMedium Static Option
3438 880 1.80 922 1.98 963 2.15 1002 2.33 1039 2.513750 912 2.12 954 2.31 994 2.50 1031 2.70 1068 2.894063 947 2.48 987 2.68 1025 2.89 1062 3.10 1098 3.314375 982 2.88 1021 3.10 1058 3.32 1094 3.55 1129 3.774688 1018 3.33 1056 3.57 1093 3.81 1128 4.04 1162 4.295000 1056 3.82 1093 4.08 1128 4.34 1162 4.59 − −5313 1094 4.38 1130 4.65 − − − − − −5625 − − − − − − − − − −5938 − − − − − − − − − −6250 − − − − − − − − − −
NOTE: For more information, see General Fan Performance Notes.Boldface indicates field−supplied drive is required.
Specifications subject to change without notice.66 513 21 3607 00
FAN PERFORMANCE (cont.)Table 8 (cont.) RAS180 3 PHASE 15 TON VERTICAL SUPPLY
CFMAvailable External Static Pressure (in. wg)
0.2 0.4 0.6 0.8 1.0RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
4500 425 0.76 490 1.02 550 1.30 607 1.61 664 1.964875 448 0.92 510 1.20 566 1.49 621 1.81 674 2.155250 472 1.10 531 1.40 584 1.70 636 2.03 686 2.385625 496 1.30 552 1.62 603 1.94 652 2.28 699 2.646000 520 1.52 574 1.86 623 2.20 670 2.55 715 2.926375 544 1.77 596 2.13 644 2.49 688 2.86 731 3.246750 568 2.05 618 2.43 664 2.81 707 3.19 749 3.597125 593 2.35 641 2.75 685 3.16 727 3.56 767 3.977500 617 2.69 664 3.11 707 3.53 747 3.95 786 4.38
CFMAvailable External Static Pressure (in. wg)
1.2 1.4 1.6 1.8 2.0RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
4500 719 2.34 772 2.76 823 3.20 872 3.67 918 4.164875 725 2.54 776 2.95 825 3.40 873 3.87 919 4.375250 734 2.76 783 3.18 830 3.63 876 4.10 920 4.605625 746 3.03 791 3.44 836 3.89 880 4.36 923 4.866000 759 3.32 802 3.74 845 4.18 887 4.66 928 5.166375 773 3.64 814 4.07 855 4.52 895 4.99 935 5.496750 789 4.00 828 4.43 867 4.89 905 5.36 943 5.877125 806 4.39 844 4.84 881 5.29 917 5.78 − −7500 823 4.82 860 5.27 895 5.74 − − − −
NOTE: For more information, see General Fan Performance Notes.
Table 8 (cont.) RAS180 3 PHASE 15 TON HORIZONTAL SUPPLY
CFMAvailable External Static Pressure (in. wg)
0.2 0.4 0.6 0.8 1.0RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
4500 423 0.77 487 0.99 545 1.22 601 1.47 655 1.734875 447 0.94 507 1.18 563 1.42 615 1.67 666 1.955250 471 1.13 528 1.38 581 1.64 631 1.91 679 2.195625 496 1.35 550 1.62 600 1.89 648 2.17 694 2.466000 520 1.59 572 1.88 620 2.17 666 2.46 710 2.766375 545 1.86 594 2.17 640 2.47 684 2.78 726 3.106750 571 2.17 617 2.48 661 2.81 704 3.13 744 3.467125 596 2.50 640 2.83 683 3.17 724 3.52 763 3.867500 622 2.87 663 3.22 705 3.58 744 3.93 782 4.30
CFM Available External Static Pressure (in. wg)
1.2 1.4 1.6 1.8 2.0RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
4500 707 2.02 758 2.33 806 2.66 853 3.01 898 3.374875 716 2.24 764 2.55 811 2.89 856 3.24 900 3.615250 726 2.49 772 2.81 817 3.14 860 3.50 903 3.875625 738 2.77 782 3.09 825 3.43 867 3.79 908 4.176000 752 3.08 794 3.41 835 3.76 875 4.12 914 4.506375 767 3.42 807 3.76 846 4.12 885 4.49 923 4.876750 784 3.80 822 4.15 859 4.51 896 4.89 933 5.287125 801 4.22 838 4.58 874 4.95 909 5.33 944 5.737500 818 4.66 854 5.04 889 5.42 923 5.81 − −
NOTE: For more information, see General Fan Performance Notes.
Specifications subject to change without notice. 67513 21 3607 00
FAN PERFORMANCE (cont.)
Table 9 – PULLEY ADJUSTMENT
UNITMOTOR/DRIVE
COMBO
MOTOR PULLEY TURNS OPEN
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
03
6
1 p
hase Standard Static 854 825 795 766 736 707 678 648 619 589 560
Medium Static 1175 1135 1094 1054 1013 973 932 892 851 811 770
High Static - - - - - - - - - - -
3 p
hase Standard Static 854 825 795 766 736 707 678 648 619 589 560
Medium Static 1175 1135 1094 1054 1013 973 932 892 851 811 770
High Static 1466 1423 1380 1337 1294 1251 1207 1164 1121 1078 1035
04
8
1 p
hase Standard Static 854 825 795 766 736 707 678 648 619 589 560
Medium Static 1175 1135 1094 1054 1013 973 932 892 851 811 770
High Static - - - - - - - - - - -
3 p
hase Standard Static 854 825 795 766 736 707 678 648 619 589 560
Medium Static 1175 1135 1094 1054 1013 973 932 892 851 811 770
High Static 1466 1423 1380 1337 1294 1251 1207 1164 1121 1078 1035
06
0
1 p
hase Standard Static 1175 1135 1094 1054 1013 973 932 892 851 811 770
Medium Static 1466 1423 1380 1337 1294 1251 1207 1164 1121 1078 1035
High Static - - - - - - - - - - -
3 p
hase Standard Static 1175 1135 1094 1054 1013 973 932 892 851 811 770
Medium Static 1466 1423 1380 1337 1294 1251 1207 1164 1121 1078 1035
High Static 1687 1649 1610 1572 1533 1495 1457 1418 1380 1341 1303
07
2
3 p
hase Standard Static 1457 1419 1380 1342 1303 1265 1227 1188 1150 1111 1073
Medium Static 1518 1484 1449 1415 1380 1346 1311 1277 1242 1208 1173
High Static 1788 1757 1725 1694 1662 1631 1600 1568 1537 1505 1474
09
0/0
91
3 p
hase Standard Static 747 721 695 670 644 618 592 566 541 515 489
Medium Static 949 927 906 884 863 841 819 798 776 755 733
High Static 1102 1083 1063 1044 1025 1006 986 967 948 928 909
10
1/1
02
3 p
hase Standard Static 733 712 690 669 647 626 604 583 561 540 518
Medium Static 936 911 887 862 838 813 788 764 739 715 690
High Static 1084 1059 1035 1010 986 961 936 912 887 863 838
12
0/1
21
3 p
hase Standard Static 838 813 789 764 739 715 690 665 640 616 591
Medium Static 1084 1059 1035 1010 986 961 936 912 887 863 838
High Static 1240 1218 1196 1175 1153 1131 1109 1087 1066 1044 1022
15
0
3 p
hase Standard Static 843 824 805 786 767 748 728 709 690 671 652
Medium Static 1084 1059 1035 1010 986 961 936 912 887 863 838
High Static 1240 1218 1196 1175 1153 1131 1109 1087 1066 1044 1022
18
0
3 p
hase Standard Static 676 659 642 625 608 592 575 558 541 524 507
Medium Static 851 829 806 784 761 739 717 694 672 649 627
High Static 955 937 919 901 883 866 848 830 812 794 776
NOTE: Do not adjust pulley further than 5 turns open. − Factory settings
Specifications subject to change without notice.68 513 21 3607 00
ELECTRICAL INFORMATION
Table 10 – RAS036 SINGLE STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 3 TONS
V-Ph-Hz
VOLTAGE
RANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full LoadFLA
MIN MAX
208−1−60 187 253 16.6 79325 1.5 STD 67% 4.9325 1.5 MED 67% 4.9
230−1−60 187 253 16.6 79325 1.5 STD 67% 4.9325 1.5 MED 67% 4.9
208−3−60 187 253 10.4 73325 1.5 STD 75% 5.2325 1.5 MED 75% 5.2325 1.5 HIGH 87% 6.9
230−3−60 187 253 10.4 73325 1.5 STD 75% 5.2325 1.5 MED 75% 5.2325 1.5 HIGH 87% 6.7
460−3−60 414 506 5.8 38325 0.8 STD 75% 2.6325 0.8 MED 75% 2.6325 0.8 HIGH 87% 3.4
575−3−60 518 633 3.8 37325 0.6 STD 73% 2.4325 0.6 MED 73% 2.4325 0.6 HIGH 78% 2.0
Table 11 – RAS048 SINGLE STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 4 TONS
V-Ph-Hz
VOLTAGE
RANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full LoadFLA
MIN MAX
208−1−60 187 253 21.8 117325 1.5 STD 67% 4.9325 1.5 MED 67% 4.9
230−1−60 187 253 21.8 117325 1.5 STD 67% 4.9325 1.5 MED 67% 4.9
208−3−60 187 253 13.7 83325 1.5 STD 75% 5.2325 1.5 MED 75% 5.2325 1.5 HIGH 87% 6.9
230−3−60 187 253 13.7 83325 1.5 STD 75% 5.2325 1.5 MED 75% 5.2325 1.5 HIGH 87% 6.7
460−3−60 414 506 6.2 41325 0.8 STD 75% 2.6325 0.8 MED 75% 2.6325 0.8 HIGH 87% 3.4
575−3−60 518 633 4.8 33325 0.6 STD 73% 2.4325 0.6 MED 73% 2.4325 0.6 HIGH 78% 2.0
Table 12 – RAS060 SINGLE STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 5 TONS
V-Ph-Hz
VOLTAGE
RANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full LoadFLA
MIN MAX
208−1−60 187 253 26.2 134325 1.5 STD 67% 4.9325 1.5 MED 76% 7.0
230−1−60 187 253 26.2 134325 1.5 STD 67% 4.9325 1.5 MED 76% 7.0
208−3−60 187 253 15.6 110325 1.5 STD 75% 5.2325 1.5 MED 87% 6.9325 1.5 HIGH 89% 8.4
230−3−60 187 253 15.6 110325 1.5 STD 75% 5.2325 1.5 MED 87% 6.7325 1.5 HIGH 89% 8.3
460−3−60 414 506 7.7 52325 0.8 STD 75% 2.6325 0.8 MED 87% 3.4325 0.8 HIGH 89% 4.2
575−3−60 518 633 5.8 39325 0.6 STD 73% 2.4325 0.6 MED 78% 2.0325 0.6 HIGH 77% 2.8
Specifications subject to change without notice. 69513 21 3607 00
ELECTRICAL INFORMATION
Table 13 – RAS072 SINGLE STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 6 TONS(Units Produced On or After 02/09/2015)
V−Ph−HzVOLTAGERANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 19.6 136
325 1.5 STD 87% 6.9325 1.5 MED 89% 8.4325 1.5 HIGH 87% 10.6
230−3−60 187 253 19.6 136
325 1.5 STD 87% 6.7325 1.5 MED 89% 8.3325 1.5 HIGH 87% 10.6
460−3−60 414 506 8.2 66
325 0.8 STD 87% 3.4325 0.8 MED 89% 4.2325 0.8 HIGH 87% 5.3
575−3−60 518 633 6.6 55
325 0.6 STD 78% 2.0325 0.6 MED 77% 2.8325 0.6 HIGH 77% 2.8
(Units Produced on or Prior to 02/08/2015)
V−Ph−HzVOLTAGERANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 19.0 123
325 1.5 STD 87% 6.9325 1.5 MED 89% 8.4325 1.5 HIGH 87% 10.6
230−3−60 187 253 19.0 123
325 1.5 STD 87% 6.7325 1.5 MED 89% 8.3325 1.5 HIGH 87% 10.6
460−3−60 414 506 9.7 62
325 0.8 STD 87% 3.4325 0.8 MED 89% 4.2325 0.8 HIGH 87% 5.3
575−3−60 518 633 7.4 50
325 0.6 STD 78% 2.0325 0.6 MED 77% 2.8325 0.6 HIGH 77% 2.8
Table 14 – RAS091 SINGLE STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 7.5 TONS
V−Ph−HzVOLTAGERANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 25.0 164325 1.5 STD 87% 5.2325 1.5 MED 89% 8.4325 1.5 HIGH 83% 13.6
230−3−60 187 253 25.0 164325 1.5 STD 87% 4.9325 1.5 MED 89% 8.3325 1.5 HIGH 83% 12.7
460−3−60 414 506 12.2 100325 0.8 STD 87% 2.5325 0.8 MED 89% 4.2325 0.8 HIGH 83% 6.4
575−3−60 518 633 9.0 78325 0.6 STD 72% 1.6325 0.6 MED 77% 2.8325 0.6 HIGH 81% 5.6
Specifications subject to change without notice.70 513 21 3607 00
ELECTRICAL INFORMATION cont.
Table 15 – RAS090 2−STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 7.5 TONS
V−Ph−HzVOLTAGERANGE
COMP (Cir 1) COMP (Cir 2) OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at Ful
Load FLAMIN MAX
208−3−60 187 253 13.6 83 13.6 83325 1.5 STD 87% 5.2325 1.5 MED 89% 8.4325 1.5 HIGH 83% 13.6
230−3−60 187 253 13.6 83 13.6 83325 1.5 STD 87% 4.9325 1.5 MED 89% 8.3325 1.5 HIGH 83% 12.7
460−3−60 414 506 6.1 41 6.1 41325 0.8 STD 87% 2.5325 0.8 MED 89% 4.2325 0.8 HIGH 83% 6.4
575−3−60 518 633 4.2 33 4.2 33325 0.6 STD 72% 1.6325 0.6 MED 77% 2.8325 0.6 HIGH 81% 5.6
Table 16 – RAS090 2−STAGE COOLING WITH 2 SPEED INDOOR FAN MOTOR 7.5 TONS
V−Ph−HzVOLTAGE RANGE
COMP 1 COMP 2 OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 13.6 83 13.6 83325 1.5 STD 0.84 5.8325 1.5 MED 0.85 8.6325 1.5 HIGH 0.84 13.6
230−3−60 187 253 13.6 83 13.6 83325 1.5 STD 0.84 5.6325 1.5 MED 0.85 7.8325 1.5 HIGH 0.84 12.7
460−3−60 414 506 6.1 41 6.1 41325 0.8 STD 0.79 2.9325 0.8 MED 0.85 3.8325 0.8 HIGH 0.84 6.4
575−3−60 518 633 4.2 33 4.2 33325 0.6 STD 0.81 2.8325 0.6 MED 0.84 4.5325 0.6 HIGH 0.83 6.2
Table 17 – RAS101 SINGLE STAGE COOLING WITH 1 SPEED INDOOR FAN MOTOR 8.5 TONS
V−Ph−HzVOLTAGERANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 27.6 191
325 1.5 STD 87% 5.2325 1.5 MED 87% 6.9325 1.5 HIGH 87% 10.6
230−3−60 187 253 27.6 191
325 1.5 STD 87% 4.9325 1.5 MED 87% 6.7325 1.5 HIGH 87% 10.6
460−3−60 414 506 12.8 100
325 0.8 STD 87% 2.5325 0.8 MED 87% 3.4325 0.8 HIGH 87% 5.3
575−3−60 518 633 9.6 78
325 0.6 STD 72% 1.6325 0.6 MED 78% 2.0325 0.6 HIGH 77% 2.8
Specifications subject to change without notice. 71513 21 3607 00
ELECTRICAL INFORMATION cont.
Table 18 – RAS102 2−STAGE COOLING WITH 1 SPEED INDOOR FAN MOTOR 8.5 TONS
V−Ph−HzVOLTAGERANGE
COMP (Cir 1) COMP (Cir 2) OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 14.5 98 13.7 83
325 1.5 STD 87% 5.2325 1.5 MED 87% 6.9325 1.5 HIGH 87% 10.6
230−3−60 187 253 14.5 98 13.7 83
325 1.5 STD 87% 4.9325 1.5 MED 87% 6.7325 1.5 HIGH 87% 10.6
460−3−60 414 506 6.3 55 6.2 41
325 0.8 STD 87% 2.5325 0.8 MED 87% 3.4325 0.8 HIGH 87% 5.3
575−3−60 518 633 6.0 41 4.8 33
325 0.6 STD 72% 1.6325 0.6 MED 78% 2.0325 0.6 HIGH 77% 2.8
Table 19 – RAS102 2−STAGE COOLING WITH 2 SPEED INDOOR FAN MOTOR 8.5 TONS
V−Ph−HzVOLTAGE RANGE
COMP 1 COMP 2 OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 14.5 98 13.7 83325 1.5 STD 0.84 5.8325 1.5 MED 0.77 7.1325 1.5 HIGH 0.82 10.8
230−3−60 187 253 14.5 98 13.7 83325 1.5 STD 0.84 5.6325 1.5 MED 0.77 6.8325 1.5 HIGH 0.82 9.8
460−3−60 414 506 6.3 55 6.2 41325 0.8 STD 0.79 2.9325 0.8 MED 0.77 3.8325 0.8 HIGH 0.82 4.9
575−3−60 518 633 6.0 41 4.8 33325 0.6 STD 0.81 2.8325 0.6 MED 0.80 3.5325 0.6 HIGH 0.84 4.5
Table 20 – RAS121 SINGLE STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 10 TONS
V−Ph−HzVOLTAGERANGE
COMP (ea) OFM (ea) IFM
RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 30.1 225325 1.5 STD 87% 6.9325 1.5 MED 87% 10.6325 1.5 HIGH 83% 13.6
230−3−60 187 253 30.1 225325 1.5 STD 87% 6.7325 1.5 MED 87% 10.6325 1.5 HIGH 83% 12.7
460−3−60 414 506 16.7 114325 0.8 STD 87% 3.4325 0.8 MED 87% 5.3325 0.8 HIGH 83% 6.4
575−3−60 518 633 12.2 80325 0.6 STD 78% 2.0325 0.6 MED 77% 2.8325 0.6 HIGH 81% 5.6
Specifications subject to change without notice.72 513 21 3607 00
ELECTRICAL INFORMATION cont.
Table 21 – RAS120 2−STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 10 TONS
V−Ph−HzVOLTAGERANGE
COMP (Cir 1) COMP (Cir 2) OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 15.6 110 15.9 110325 1.5 STD 87% 6.9325 1.5 MED 87% 10.6325 1.5 HIGH 83% 13.6
230−3−60 187 253 15.6 110 15.9 110325 1.5 STD 87% 6.7325 1.5 MED 87% 10.6325 1.5 HIGH 83% 12.7
460−3−60 414 506 7.7 52 7.7 52325 0.8 STD 87% 3.4325 0.8 MED 87% 5.3325 0.8 HIGH 83% 6.4
575−3−60 518 633 5.8 39 5.7 39325 0.6 STD 78% 2.0325 0.6 MED 77% 2.8325 0.6 HIGH 81% 5.6
Table 22 – RAS120 2−STAGE COOLING WITH 2 SPEED INDOOR FAN MOTOR 10 TONS
V−Ph−HzVOLTAGE RANGE
COMP 1 COMP 2 OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 15.6 110 15.9 110325 1.5 STD 0.77 7.1325 1.5 MED 0.82 10.8325 1.5 HIGH 0.84 13.6
230−3−60 187 253 15.6 110 15.9 110325 1.5 STD 0.77 6.8325 1.5 MED 0.82 9.8325 1.5 HIGH 0.84 12.7
460−3−60 414 506 7.7 52 7.7 52325 0.8 STD 0.77 3.8325 0.8 MED 0.82 4.9325 0.8 HIGH 0.84 6.4
575−3−60 518 633 5.8 39 5.7 39325 0.6 STD 0.80 3.5325 0.6 MED 0.84 4.5325 0.6 HIGH 0.83 6.2
Table 23 – RAS150 2−STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 12.5 TONS
(Units Produced On or After 02/16/2015)
V−Ph−HzVOLTAGERANGE
COMP (Cir 1) COMP (Cir 2) OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 19.6 136 22.4 1491070 6.2 STD 89% 8.41070 6.2 MED 87% 10.61070 6.2 HIGH 83% 13.6
230−3−60 187 253 19.6 136 22.4 1491070 6.2 STD 89% 8.31070 6.2 MED 87% 10.61070 6.2 HIGH 83% 12.7
460−3−60 414 506 8.2 66 10.6 751070 3.1 STD 89% 4.21070 3.1 MED 87% 5.31070 3.1 HIGH 83% 6.4
575−3−60 518 633 6.6 55 7.7 541070 2.5 STD 77% 2.81070 2.5 MED 77% 2.81070 2.5 HIGH 81% 5.6
Specifications subject to change without notice. 73513 21 3607 00
ELECTRICAL INFORMATION cont.TABLE 23 (cont.) RAS150 2−STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 12.5 TONS
(Units Produced on or Prior to 02/15/2015)
V−Ph−HzVOLTAGERANGE
COMP (Cir 1) COMP (Cir 2) OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 19.0 123 22.4 1491070 6.2 STD 89% 8.41070 6.2 MED 87% 10.61070 6.2 HIGH 83% 13.6
230−3−60 187 253 19.0 123 22.4 1491070 6.2 STD 89% 8.31070 6.2 MED 87% 10.61070 6.2 HIGH 83% 12.7
460−3−60 414 506 9.7 62 10.6 751070 3.1 STD 89% 4.21070 3.1 MED 87% 5.31070 3.1 HIGH 83% 6.4
575−3−60 518 633 7.4 50 7.7 541070 2.5 STD 77% 2.81070 2.5 MED 77% 2.81070 2.5 HIGH 81% 5.6
Table 24 – RAS150 2−STAGE COOLING WITH 2 SPEED INDOOR FAN MOTOR 12.5 TONS
(Units Produced On or After 02/16/2015)
V−Ph−HzVOLTAGE RANGE
COMP 1 COMP 2 OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 19.6 136 22.4 1491070 6.2 STD 0.85 8.61070 6.2 MED 0.82 10.81070 6.2 HIGH 0.84 13.6
230−3−60 187 253 19.6 136 22.4 1491070 6.2 STD 0.85 7.81070 6.2 MED 0.82 9.81070 6.2 HIGH 0.84 12.7
460−3−60 414 506 8.2 66 10.6 751070 3.1 STD 0.85 3.81070 3.1 MED 0.82 4.91070 3.1 HIGH 0.84 6.4
575−3−60 518 633 6.6 55 7.7 541070 2.5 STD 0.84 4.51070 2.5 MED 0.84 4.51070 2.5 HIGH 0.83 6.2
(Units Produced on or Prior to 02/15/2015)
V−Ph−HzVOLTAGE RANGE
COMP 1 COMP 2 OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 19.0 123 22.4 1491070 6.2 STD 0.85 8.61070 6.2 MED 0.82 10.81070 6.2 HIGH 0.84 13.6
230−3−60 187 253 19.0 123 22.4 1491070 6.2 STD 0.85 7.81070 6.2 MED 0.82 9.81070 6.2 HIGH 0.84 12.7
460−3−60 414 506 9.7 62 10.6 751070 3.1 STD 0.85 3.81070 3.1 MED 0.82 4.91070 3.1 HIGH 0.84 6.4
575−3−60 518 633 7.4 50 7.7 541070 2.5 STD 0.84 4.51070 2.5 MED 0.84 4.51070 2.5 HIGH 0.83 6.2
Specifications subject to change without notice.74 513 21 3607 00
ELECTRICAL INFORMATION cont.
Table 25 – RAS180 2−STAGE COOLING WITH SINGLE SPEED INDOOR FAN MOTOR 15 TONS
V−Ph−HzVOLTAGERANGE
COMP (Cir 1) COMP (Cir 2) OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at
Full Load FLAMIN MAX
208−3−60 187 253 25.0 164 25.0 164280 1.5 STD 89% 8.4280 1.5 MED 87% 10.6280 1.5 HIGH 90% 20.4
230−3−60 187 253 25.0 164 25.0 164280 1.5 STD 89% 8.3280 1.5 MED 87% 10.6280 1.5 HIGH 90% 20.4
460−3−60 414 506 12.2 100 12.8 100280 0.8 STD 89% 4.2280 0.8 MED 87% 5.3280 0.8 HIGH 90% 10.2
575−3−60 518 633 9.8 78 9.6 78280 0.6 STD 77% 2.8280 0.6 MED 77% 2.8280 0.6 HIGH 94% 9.0
Table 26 – RAS180 2−STAGE COOLING WITH 2 SPEED INDOOR FAN MOTOR 15 TONS
V−Ph−HzVOLTAGE RANGE
COMP 1 COMP 2 OFM (ea) IFM
RLA LRA RLA LRA WATTS FLA TYPEEFF at Full
Load FLAMIN MAX
208−3−60 187 253 25.0 164 25.0 164280 1.5 STD 0.85 8.6280 1.5 MED 0.82 10.8280 1.5 HIGH 0.90 20.4
230−3−60 187 253 25.0 164 25.0 164280 1.5 STD 0.85 7.8280 1.5 MED 0.82 9.8280 1.5 HIGH 0.90 20.4
460−3−60 414 506 12.2 100 12.8 100280 0.8 STD 0.85 3.8280 0.8 MED 0.82 4.9280 0.8 HIGH 0.90 10.2
575−3−60 518 633 9.8 78 9.6 78280 0.6 STD 0.84 4.5280 0.6 MED 0.84 4.5280 0.6 HIGH 0.94 9
Specifications subject to change without notice. 75513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 – RAS036 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTOR WITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−1−60
STD
101A00 4.4 3.3/4.0 − −102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 037 037104B00 10.5 7.9/9.6 040 040
102A00,102A00 13.0 9.8/11.9 040 040
MED
101A00 4.4 3.3/4.0 − −102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 037 037104B00 10.5 7.9/9.6 040 040
102A00,102A00 13.0 9.8/11.9 040 040
208/230−3−60
STD
101A00 4.4 3.3/4.0 − −102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 037
MED
101A00 4.4 3.3/4.0 − −102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 037
HIGH
101A00 4.4 3.3/4.0 − −102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 037
460−3−60
STD
106A00 6.0 5.5 − −107A00 8.8 8.1 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
MED
106A00 6.0 5.5 − −107A00 8.8 8.1 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
HIGH
106A00 6.0 5.5 − −107A00 8.8 8.1 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.76 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS036 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−1−60
STD
101A00 4.4 3.3/4.0 037 037102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037104B00 10.5 7.9/9.6 040 040
102A00,102A00 13.0 9.8/11.9 040 040
MED
101A00 4.4 3.3/4.0 037 037102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037104B00 10.5 7.9/9.6 040 040
102A00,102A00 13.0 9.8/11.9 040 040
208/230−3−60
STD
101A00 4.4 3.3/4.0 037 037102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 037
MED
101A00 4.4 3.3/4.0 037 037102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 037
HIGH
101A00 4.4 3.3/4.0 037 037102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 037
460−3−60
STD
106A00 6.0 5.5 − −107A00 8.8 8.1 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
MED
106A00 6.0 5.5 − −107A00 8.8 8.1 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
HIGH
106A00 6.0 5.5 − −107A00 8.8 8.1 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 77513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS048 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−1−60
STD
101A00 4.4 3.3/4.0 − −103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
MED
101A00 4.4 3.3/4.0 − −103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
208/230−3−60
STD
102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 − −105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038
MED
102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 − −105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038
HIGH
102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 − −105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038
460−3−60
STD
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037
MED
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037
HIGH
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.78 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS048 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−1−60
STD
101A00 4.4 3.3/4.0 037 037103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
MED
101A00 4.4 3.3/4.0 037 037103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
208/230−3−60
STD
102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038
MED
102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038
HIGH
102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038
460−3−60
STD
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037
MED
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037
HIGH
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 79513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS060 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−1−60
STD
102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
MED
102A00 6.5 4.9/6.0 − −103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
208/230−3−60
STD
102A00 6.5 4.9/6.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
MED
102A00 6.5 4.9/6.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
HIGH
102A00 6.5 4.9/6.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 038
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
460−3−60
STD
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
MED
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
HIGH
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.80 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS060 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−1−60
STD
102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
MED
102A00 6.5 4.9/6.0 037 037103B00 8.7 6.5/8.0 037 037
102A00,102A00 13.0 9.8/11.9 040 040103B00,103B00 17.4 13.1/16.0 040 040104B00,104B00 21.0 15.8/19.3 040 040
208/230−3−60
STD
102A00 6.5 4.9/6.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
MED
102A00 6.5 4.9/6.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
HIGH
102A00 6.5 4.9/6.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 038
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
460−3−60
STD
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
MED
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
HIGH
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 81513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS072 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
102A00 6.5 4.9/6.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
MED
102A00 6.5 4.9/6.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 037 038
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
HIGH
102A00 6.5 4.9/6.0 − −104B00 10.5 7.9/9.6 − −105A00 16.0 12.0/14.7 038 038
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
460−3−60
STD
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
MED
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
HIGH
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.82 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS072 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
102A00 6.5 4.9/6.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 037
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
MED
102A00 6.5 4.9/6.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 037 038
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
HIGH
102A00 6.5 4.9/6.0 037 037104B00 10.5 7.9/9.6 037 037105A00 16.0 12.0/14.7 038 038
104B00,104B00 21.0 15.8/19.3 038 038104B00,105A00 26.5 19.9/24.3 038 038
460−3−60
STD
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
MED
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
HIGH
106A00 6.0 5.5 − −108A00 11.5 10.6 − −109A00 14.0 12.9 − −
108A00,108A00 23.0 21.1 037 037108A00,109A00 25.5 23.4 037 037
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 83513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS091 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 042111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
MED
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
HIGH
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 043 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
460−3−60
STD
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
MED
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
HIGH
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
575−3−60
STD118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
MED118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
HIGH 118A00 17.0 17.0 042 042119A00 34.0 34.0 042 044
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.84 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS091 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 042111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
MED
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
HIGH
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 043 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
460−3−60
STD
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
MED
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
HIGH
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
575−3−60
STD118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
MED118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
HIGH 118A00 17.0 17.0 042 042119A00 34.0 34.0 042 044
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 85513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS090 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 042111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
MED
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
HIGH
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 043 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
460−3−60
STD
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
MED
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
HIGH
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
575−3−60
STD118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
MED118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
HIGH 118A00 17.0 17.0 042 042119A00 34.0 34.0 042 044
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.86 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS090 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 042111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
MED
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
HIGH
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 043 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
460−3−60
STD
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
MED
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
HIGH
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
575−3−60
STD118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
MED118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
HIGH 118A00 17.0 17.0 042 042119A00 34.0 34.0 042 044
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 87513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS090 2−STAGE COOLING 2−SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 042111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
MED
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 042 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
HIGH
117A00 10.4 7.8/9.6 042 042110A00 16.0 12.0/14.7 043 043111A00 24.8 18.6/22.8 043 043112A00 32.0 24.0/29.4 043 043
112A00,117A00 42.4 31.8/38.9 045 045
460−3−60
STD
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
MED
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
HIGH
116A00 13.9 12.8 042 042113A00 16.5 15.2 042 042114A00 27.8 25.5 042 042115A00 33.0 30.3 042 042
114A00,116A00 41.7 38.3 044 044
575−3−60
STD118A00 17.0 17.0 042 042119A00 34.0 34.0 042 042
MED118A00 17.0 17.0 042 042119A00 34.0 34.0 042 044
HIGH 118A00 17.0 17.0 042 042119A00 34.0 34.0 042 044
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.88 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS101 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/203−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 047111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 049110A00 16.0 12.0/14.7 049 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
HIGH 118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 89513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS101 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/203−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 047111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 049110A00 16.0 12.0/14.7 049 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
HIGH 118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.90 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS102 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/203−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 047111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
HIGH 118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 91513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS102 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/203−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 047111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
HIGH 118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.92 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS102 2−STAGE COOLING 2−SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/203−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 047111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049111A00 24.8 18.6/22.8 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047114A00 27.8 25.5 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
HIGH 118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 93513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS121 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 047 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.94 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS121 SINGLE STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 047 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 95513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS120 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.96 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS120 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 97513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS120 2−STAGE COOLING 2−SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 047 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
117A00 10.4 7.8/9.6 047 047110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.98 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS150 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 99513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS150 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
− −117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 047
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.100 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS150 2−STAGE COOLING 2−SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
MED
117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
HIGH
− −117A00 10.4 7.8/9.6 049 049110A00 16.0 12.0/14.7 049 049112A00 32.0 24.0/29.4 049 049
112A00,117A00 42.4 31.8/38.9 051 051112A00,110A00 50.0 37.6/45.9 051 051
460−3−60
STD
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
MED
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
HIGH
116A00 13.9 12.8 047 047113A00 16.5 15.2 047 047115A00 33.0 30.3 047 047
114A00,116A00 41.7 38.3 050 050115A00,113A00 50.0 45.9 050 050
575−3−60
STD118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
MED118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
HIGH118A00 17.0 17.0 047 047119A00 34.0 34.0 047 050
118A00,119A00 51.0 51.0 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 101513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS180 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
MED
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
HIGH
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
460−3−60
STD
292A00 16.5 15.2 − −295A00 33.5 30.8 047 047
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
MED
292A00 16.5 15.2 − −295A00 33.5 30.8 047 047
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
HIGH
292A00 16.5 15.2 − −295A00 33.5 30.8 050 050
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
575−3−60
STD
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 047 050293A00,296A00 50.0 45.9 047 047296A00,296A00 67.0 61.5 050 050
MED
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 047 050293A00,296A00 50.0 45.9 047 047296A00,296A00 67.0 61.5 050 050
HIGH
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 050 050293A00,296A00 50.0 45.9 050 050296A00,296A00 67.0 61.5 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.102 513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS180 2−STAGE COOLING SINGLE SPEED INDOOR FAN MOTORWITH FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
MED
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
HIGH
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
460−3−60
STD
292A00 16.5 15.2 − −295A00 33.5 30.8 047 047
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
MED
292A00 16.5 15.2 − −295A00 33.5 30.8 047 047
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
HIGH
292A00 16.5 15.2 − −295A00 33.5 30.8 050 050
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
575−3−60
STD
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 047 050293A00,296A00 50.0 45.9 047 047296A00,296A00 67.0 61.5 050 050
MED
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 047 050293A00,296A00 50.0 45.9 047 047296A00,296A00 67.0 61.5 050 050
HIGH
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 050 050293A00,296A00 50.0 45.9 050 050296A00,296A00 67.0 61.5 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice. 103513 21 3607 00
ELECTRIC HEAT − ELECTRICAL INFORMATION
Table 27 (cont.) − RAS180 2−STAGE COOLING 2−SPEED INDOOR FAN MOTORWITHOUT FACTORY INSTALLED NON−FUSED DISCONNECT
NOM.V−PH−Hz.
IFMTYPE
ELECTRIC HEATERPART NUMBER
CRHEATERXXXXXX
NOMPWR(kW)
APPPWR(kW)
SINGLE POINT KIT PART NUMBERCRSINGLEXXXXXX
NO C.O. or UNPWRD C.O.
NO P.E.w/P.E.
(pwrd fr/unit)
208/230−3−60
STD
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
MED
291A00 16.5 12.4/15.2 049 049294A00 33.5 25.2/30.8 049 049
288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
HIGH
294A00 33.5 25.2/30.8 049 049288A00,294A00 43.5 32.7/40.0 051 051291A00,294A00 50.0 37.6/45.9 051 051294A00,294A00 67.0 50.3/61.5 053 053
460−3−60
STD
292A00 16.5 15.2 − −295A00 33.5 30.8 047 047
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
MED
292A00 16.5 15.2 − −295A00 33.5 30.8 047 047
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
HIGH
292A00 16.5 15.2 − −295A00 33.5 30.8 050 050
289A00,295A00 43.5 40.0 050 050292A00,295A00 50.0 45.9 050 050295A00,295A00 67.0 61.5 050 050
575−3−60
STD
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 047 050293A00,296A00 50.0 45.9 047 047296A00,296A00 67.0 61.5 050 050
MED
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 047 050293A00,296A00 50.0 45.9 047 047296A00,296A00 67.0 61.5 050 050
HIGH
293A00 16.5 15.2 − −296A00 33.5 30.8 047 047
290A00,296A00 43.5 40.0 050 050293A00,296A00 50.0 45.9 050 050296A00,296A00 67.0 61.5 050 050
LEGEND:APP PWR − 208 / 230V / 460V / 575VC.O. − Convenience outletFLA − Full load ampsIFM − Indoor fan motorNOM PWR − 240V / 480V / 600VP.E. − Power exhaustUNPWRD − Unpowered convenience outlet
Specifications subject to change without notice.104 513 21 3607 00
ELECTRICAL INFORMATIONTable 28 – Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZE
MCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S036
208/2
30-
1-
60
STD
NONE − − 28 40 26 95 30 45 29 97
101A 3.3/4.4 15.9/18.3 28/29 40/40 26/27 95/95 30/32 45/45 29/29 97/97
102A 4.9/6.5 23.5/27.1 36/40 40/45 33/37 95/95 38/43 45/45 35/39 97/97
103B 6.5/8.7 31.4/36.3 46/52 50/60 42/47 95/95 48/54 50/60 44/50 97/97
104B 7.9/10.5 37.9/43.8 54/61 60/70 49/56 95/95 56/64 60/70 51/58 97/97
102A+102A 9.8/13.0 46.9/54.2 65/74 70/80 60/68 95/95 68/77 70/80 62/70 97/97
MED
NONE − − 28 40 26 95 30 45 29 97
101A 3.3/4.4 15.9/18.3 28/29 40/40 26/27 95/95 30/32 45/45 29/29 97/97
102A 4.9/6.5 23.5/27.1 36/40 40/45 33/37 95/95 38/43 45/45 35/39 97/97
103B 6.5/8.7 31.4/36.3 46/52 50/60 42/47 95/95 48/54 50/60 44/50 97/97
104B 7.9/10.5 37.9/43.8 54/61 60/70 49/56 95/95 56/64 60/70 51/58 97/97
102A+102A 9.8/13.0 46.9/54.2 65/74 70/80 60/68 95/95 68/77 70/80 62/70 97/97
208/2
30-
3-
60
STD
NONE − − 20 30 20 96 22 30 22 98
101A 3.3/4.4 9.2/10.6 20/20 30/30 20/20 96/96 22/23 30/30 22/22 98/98
102A 4.9/6.5 13.6/15.6 24/26 30/30 22/24 96/96 26/29 30/30 24/26 98/98
103B 6.5/8.7 18.1/20.9 30/33 30/35 27/30 96/96 32/35 35/40 29/32 98/98
104B 7.9/10.5 21.9/25.3 34/39 35/40 31/35 96/96 37/41 40/45 33/37 98/98
105A 12.0/16.0 33.4/38.5 49/55 50/60 44/50 96/96 51/57 60/60 47/52 98/98
MED
NONE − − 20 30 20 96 22 30 22 98
101A 3.3/4.4 9.2/10.6 20/20 30/30 20/20 96/96 22/23 30/30 22/22 98/98
102A 4.9/6.5 13.6/15.6 24/26 30/30 22/24 96/96 26/29 30/30 24/26 98/98
103B 6.5/8.7 18.1/20.9 30/33 30/35 27/30 96/96 32/35 35/40 29/32 98/98
104B 7.9/10.5 21.9/25.3 34/39 35/40 31/35 96/96 37/41 40/45 33/37 98/98
105A 12.0/16.0 33.4/38.5 49/55 50/60 44/50 96/96 51/57 60/60 47/52 98/98
HIGH
NONE − − 22/22 30/30 22/21 134 24/24 30/30 24/24 136
101A 3.3/4.4 9.2/10.6 22/22 30/30 22/21 134/134 24/24 30/30 24/24 136/136
102A 4.9/6.5 13.6/15.6 26/28 30/30 24/26 134/134 28/31 30/35 26/28 136/136
103B 6.5/8.7 18.1/20.9 32/35 35/35 29/32 134/134 34/37 35/40 31/34 136/136
104B 7.9/10.5 21.9/25.3 36/40 40/40 33/37 134/134 39/43 40/45 35/39 136/136
105A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 134/134 53/59 60/60 49/54 136/136
460-
3-
60
STD
NONE − − 11 15 11 49 12 15 12 50
106A 6.0 7.2 13 15 11 49 14 15 12 50
107A 8.8 10.6 17 20 15 49 18 20 16 50
108A 11.5 13.8 21 25 19 49 22 25 20 50
109A 14.0 16.8 25 25 22 49 26 30 23 50
MED
NONE − − 11 15 11 49 12 15 12 50
106A 6.0 7.2 13 15 11 49 14 15 12 50
107A 8.8 10.6 17 20 15 49 18 20 16 50
108A 11.5 13.8 21 25 19 49 22 25 20 50
109A 14.0 16.8 25 25 22 49 26 30 23 50
HIGH
NONE − − 12 15 12 68 13 15 13 69
106A 6.0 7.2 14 15 12 68 15 15 13 69
107A 8.8 10.6 18 20 16 68 19 20 17 69
108A 11.5 13.8 22 25 20 68 23 25 21 69
109A 14.0 16.8 26 30 23 68 27 30 24 69
575-
3-
60 STD NONE − − 8 15 8 46 10 15 10 48
MED NONE − − 8 15 8 46 10 15 10 48
HIGH NONE − − 8 15 7 50 10 15 10 52
Specifications subject to change without notice. 105513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZE
MCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S048
208/2
30-
1-
60
STD
NONE − − 34 50 32 133 36 50 35 135
101A 3.3/4.4 15.9/18.3 34/34 50/50 32/32 133/133 36/36 50/50 35/35 135/135
103B 6.5/8.7 31.4/36.3 46/52 50/60 42/47 133/133 48/54 50/60 44/50 135/135
102A+102A 9.8/13.0 46.9/54.2 65/74 70/80 60/68 133/133 68/77 70/80 62/70 135/135
103B+103B 13.1/17.4 62.8/72.5 85/97 90/100 78/89 133/133 87/100 90/100 80/91 135/135
104B+104B 15.8/21.0 75.8/87.5 101/116 110/125 93/106 133/133 104/118 110/125 95/108 135/135
MED
NONE − − 34 50 32 133 36 50 35 135
101A 3.3/4.4 15.9/18.3 34/34 50/50 32/32 133/133 36/36 50/50 35/35 135/135
103B 6.5/8.7 31.4/36.3 46/52 50/60 42/47 133/133 48/54 50/60 44/50 135/135
102A+102A 9.8/13.0 46.9/54.2 65/74 70/80 60/68 133/133 68/77 70/80 62/70 135/135
103B+103B 13.1/17.4 62.8/72.5 85/97 90/100 78/89 133/133 87/100 90/100 80/91 135/135
104B+104B 15.8/21.0 75.8/87.5 101/116 110/125 93/106 133/133 104/118 110/125 95/108 135/135
208/2
30-
3-
60
STD
NONE − − 24 30 23 106 26 30 26 108
102A 4.9/6.5 13.6/15.6 24/26 30/30 23/24 106/106 26/29 30/30 26/26 108/108
103B 6.5/8.7 18.1/20.9 30/33 30/35 27/30 106/106 32/35 35/40 29/32 108/108
105A 12.0/16.0 33.4/38.5 49/55 50/60 44/50 106/106 51/57 60/60 47/52 108/108
104B+104B 15.8/21.0 43.8/50.5 62/70 70/70 56/64 106/106 64/72 70/80 59/66 108/108
MED
NONE − − 24 30 23 106 26 30 26 108
102A 4.9/6.5 13.6/15.6 24/26 30/30 23/24 106/106 26/29 30/30 26/26 108/108
103B 6.5/8.7 18.1/20.9 30/33 30/35 27/30 106/106 32/35 35/40 29/32 108/108
105A 12.0/16.0 33.4/38.5 49/55 50/60 44/50 106/106 51/57 60/60 47/52 108/108
104B+104B 15.8/21.0 43.8/50.5 62/70 70/70 56/64 106/106 64/72 70/80 59/66 108/108
HIGH
NONE − − 26/26 30/30 25/25 144 28/28 40/40 28/27 146
102A 4.9/6.5 13.6/15.6 26/28 30/30 25/26 144/144 28/31 40/40 28/28 146/146
103B 6.5/8.7 18.1/20.9 32/35 35/35 29/32 144/144 34/37 40/40 31/34 146/146
105A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 144/144 53/59 60/60 49/54 146/146
104B+104B 15.8/21.0 43.8/50.5 64/72 70/80 58/66 144/144 66/74 70/80 60/68 146/146
460-
3-
60
STD
NONE − − 12 15 11 52 13 15 12 53
106A 6.0 7.2 13 15 11 52 14 15 12 53
108A 11.5 13.8 21 25 19 52 22 25 20 53
109A 14.0 16.8 25 25 22 52 26 30 23 53
108A+108A 23.0 27.7 38 40 35 52 40 40 36 53
MED
NONE − − 12 15 11 52 13 15 12 53
106A 6.0 7.2 13 15 11 52 14 15 12 53
108A 11.5 13.8 21 25 19 52 22 25 20 53
109A 14.0 16.8 25 25 22 52 26 30 23 53
108A+108A 23.0 27.7 38 40 35 52 40 40 36 53
HIGH
NONE − − 12 15 12 71 13 15 13 72
106A 6.0 7.2 14 15 12 71 15 15 13 72
108A 11.5 13.8 22 25 20 71 23 25 21 72
109A 14.0 16.8 26 30 23 71 27 30 24 72
108A+108A 23.0 27.7 39 40 36 71 41 45 37 72
575-
3-
60 STD NONE − − 9 15 9 42 11 15 11 44
MED NONE − − 9 15 9 42 11 15 11 44
HIGH NONE − − 9 15 9 46 11 15 11 48
Specifications subject to change without notice.106 513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZE
MCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S060
208/2
30-
1-
60
STD
NONE − − 40 60 37 150 42 60 40 152
102A 4.9/6.5 23.5/27.1 40/40 60/60 37/37 150/150 42/43 60/60 40/40 152/152
103B 6.5/8.7 31.4/36.3 46/52 60/60 42/47 150/150 48/54 60/60 44/50 152/152
102A+102A 9.8/13.0 46.9/54.2 65/74 70/80 60/68 150/150 68/77 70/80 62/70 152/152
103B+103B 13.1/17.4 62.8/72.5 85/97 90/100 78/89 150/150 87/100 90/100 80/91 152/152
104B+104B 15.8/21.0 75.8/87.5 101/116 110/125 93/106 150/150 104/118 110/125 95/108 152/152
MED
NONE − − 42 60 40 175 44 60 42 177
102A 4.9/6.5 23.5/27.1 42/43 60/60 40/40 175/175 44/45 60/60 42/42 177/177
103B 6.5/8.7 31.4/36.3 48/55 60/60 44/50 175/175 51/57 60/60 46/52 177/177
102A+102A 9.8/13.0 46.9/54.2 68/77 70/80 62/70 175/175 70/79 70/80 64/73 177/177
103B+103B 13.1/17.4 62.8/72.5 88/100 90/100 80/91 175/175 90/102 90/110 82/94 177/177
104B+104B 15.8/21.0 75.8/87.5 104/119 110/125 95/109 175/175 106/121 110/125 97/111 177/177
208/2
30-
3-
60
STD
NONE − − 27 40 26 133 29 40 28 135
102A 4.9/6.5 13.6/15.6 27/27 40/40 26/26 133/133 29/29 40/40 28/28 135/135
104B 7.9/10.5 21.9/25.3 34/39 40/40 31/35 133/133 37/41 40/45 33/37 135/135
105A 12.0/16.0 33.4/38.5 49/55 50/60 44/50 133/133 51/57 60/60 47/52 135/135
104B+104B 15.8/21.0 43.8/50.5 62/70 70/70 56/64 133/133 64/72 70/80 59/66 135/135
104B+105A 19.9/26.5 55.2/63.8 76/87 80/90 69/79 133/133 78/89 80/90 72/82 135/135
MED
NONE − − 28/28 40/40 28/27 171 30/30 45/45 30/30 173
102A 4.9/6.5 13.6/15.6 28/28 40/40 28/27 171/171 30/31 45/45 30/30 173/173
104B 7.9/10.5 21.9/25.3 36/40 40/40 33/37 171/171 39/43 45/45 35/39 173/173
105A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 171/171 53/59 60/60 49/54 173/173
104B+104B 15.8/21.0 43.8/50.5 64/72 70/80 58/66 171/171 66/74 70/80 60/68 173/173
104B+105A 19.9/26.5 55.2/63.8 78/89 80/90 71/81 171/171 80/91 90/100 74/83 173/173
HIGH
NONE − − 30/30 45/40 29/29 186 32/32 45/45 32/31 188
102A 4.9/6.5 13.6/15.6 30/30 45/40 29/29 186/186 32/33 45/45 32/31 188/188
104B 7.9/10.5 21.9/25.3 38/42 45/45 35/39 186/186 41/45 45/45 37/41 188/188
105A 12.0/16.0 33.4/38.5 53/59 60/60 48/54 186/186 55/61 60/70 50/56 188/188
104B+104B 15.8/21.0 43.8/50.5 66/74 70/80 60/68 186/186 68/76 70/80 62/70 188/188
104B+105A 19.9/26.5 55.2/63.8 80/91 80/100 73/83 186/186 82/93 90/100 75/85 188/188
460-
3-
60
STD
NONE − − 13 20 13 63 14 20 14 64
106A 6.0 7.2 13 20 13 63 14 20 14 64
108A 11.5 13.8 21 25 19 63 22 25 20 64
109A 14.0 16.8 25 25 22 63 26 30 23 64
108A+108A 23.0 27.7 38 40 35 63 40 40 36 64
108A+109A 25.5 30.7 42 45 38 63 43 45 39 64
MED
NONE − − 14 20 14 82 15 20 15 83
106A 6.0 7.2 14 20 14 82 15 20 15 83
108A 11.5 13.8 22 25 20 82 23 25 21 83
109A 14.0 16.8 26 30 23 82 27 30 24 83
108A+108A 23.0 27.7 39 40 36 82 41 45 37 83
108A+109A 25.5 30.7 43 45 39 82 44 45 40 83
HIGH
NONE − − 15 20 15 90 16 20 16 91
106A 6.0 7.2 15 20 15 90 16 20 16 91
108A 11.5 13.8 23 25 21 90 24 25 22 91
109A 14.0 16.8 27 30 24 90 28 30 25 91
108A+108A 23.0 27.7 40 40 37 90 42 45 38 91
108A+109A 25.5 30.7 44 45 40 90 45 45 41 91
575-
3-
60 STD NONE − − 11 15 10 48 13 15 12 50
MED NONE − − 10 15 10 52 12 15 12 54
HIGH NONE − − 11 15 11 63 13 15 13 65
Specifications subject to change without notice. 107513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)
(Units Produced On or After 02/09/2015)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZEMCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S072
208/2
30-
3-
60
STD
NONE − − 33/33 50/50 32/32 197 35/35 50/50 34/34 199
102A 4.9/6.5 13.6/15.6 33/33 50/50 32/32 197/197 35/35 50/50 34/34 199/199
104B 7.9/10.5 21.9/25.3 36/40 50/50 33/37 197/197 39/43 50/50 35/39 199/199
105A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 197/197 53/59 60/60 49/54 199/199
104B+104B 15.8/21.0 43.8/50.5 64/72 70/80 58/66 197/197 66/74 70/80 60/68 199/199
104B+105A 19.9/26.5 55.2/63.8 78/89 80/90 71/81 197/197 80/91 90/100 74/83 199/199
MED
NONE − − 35/35 50/50 34/34 212 37/37 50/50 36/36 214
102A 4.9/6.5 13.6/15.6 35/35 50/50 34/34 212/212 37/37 50/50 36/36 214/214
104B 7.9/10.5 21.9/25.3 38/42 50/50 35/39 212/212 41/45 50/50 37/41 214/214
105A 12.0/16.0 33.4/38.5 53/59 60/60 48/54 212/212 55/61 60/70 50/56 214/214
104B+104B 15.8/21.0 43.8/50.5 66/74 70/80 60/68 212/212 68/76 70/80 62/70 214/214
104B+105A 19.9/26.5 55.2/63.8 80/91 80/100 73/83 212/212 82/93 90/100 75/85 214/214
HIGH
NONE − − 37 50 36 226 39 50 39 228
102A 4.9/6.5 13.6/15.6 37/37 50/50 36/36 226/226 39/39 50/50 39/39 228/228
104B 7.9/10.5 21.9/25.3 41/45 50/50 37/41 226/226 43/48 50/50 40/43 228/228
105A 12.0/16.0 33.4/38.5 55/62 60/70 51/56 226/226 58/64 60/70 53/59 228/228
104B+104B 15.8/21.0 43.8/50.5 68/77 70/80 63/70 226/226 71/79 80/80 65/72 228/228
104B+105A 19.9/26.5 55.2/63.8 83/93 90/100 76/86 226/226 85/96 90/100 78/88 228/228
460-
3-
60
STD
NONE − − 15 20 14 96 16 20 15 97
106A 6.0 7.2 15 20 14 96 16 20 15 97
108A 11.5 13.8 22 25 20 96 23 25 21 97
109A 14.0 16.8 26 30 23 96 27 30 24 97
108A+108A 23.0 27.7 39 40 36 96 41 45 37 97
108A+109A 25.5 30.7 43 45 39 96 44 45 40 97
MED
NONE − − 16 20 15 104 17 20 16 105
106A 6.0 7.2 16 20 15 104 17 20 16 105
108A 11.5 13.8 23 25 21 104 24 25 22 105
109A 14.0 16.8 27 30 24 104 28 30 25 105
108A+108A 23.0 27.7 40 40 37 104 42 45 38 105
108A+109A 25.5 30.7 44 45 40 104 45 45 41 105
HIGH
NONE − − 17 20 16 111 18 25 18 112
106A 6.0 7.2 17 20 16 111 18 25 18 112
108A 11.5 13.8 24 25 22 111 26 30 23 112
109A 14.0 16.8 28 30 25 111 29 30 27 112
108A+108A 23.0 27.7 42 45 38 111 43 45 39 112
108A+109A 25.5 30.7 45 50 41 111 47 50 43 112
575-
3-
60 STD NONE − − 11 15 11 68 13 15 13 70
MED NONE − − 12 15 12 79 14 20 14 81
HIGH NONE − − 12 15 12 79 14 20 14 81
Specifications subject to change without notice.108 513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)
(Units Produced On or Prior to 02/08/2015)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S072
208/2
30-
3-
60
STD
NONE − − 33/32 50/50 32/31 184 34/34 50/50 34/33 186
102A 4.9/6.5 13.6/15.6 33/32 50/50 32/31 184/184 35/35 50/50 34/33 186/186
104B 7.9/10.5 21.9/25.3 36/40 50/50 33/37 184/184 39/43 50/50 35/39 186/186
105A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 184/184 53/59 60/60 49/54 186/186
104B+104B 15.8/21.0 43.8/50.5 64/72 70/80 58/66 184/184 66/74 70/80 60/68 186/186
104B+105A 19.9/26.5 55.2/63.8 78/89 80/90 71/81 184/184 80/91 90/100 74/83 186/186
MED
NONE − − 34/34 50/50 33/33 199 36/36 50/50 35/35 201
102A 4.9/6.5 13.6/15.6 34/34 50/50 33/33 199/199 36/36 50/50 35/35 201/201
104B 7.9/10.5 21.9/25.3 38/42 50/50 35/39 199/199 41/45 50/50 37/41 201/201
105A 12.0/16.0 33.4/38.5 53/59 60/60 48/54 199/199 55/61 60/70 50/56 201/201
104B+104B 15.8/21.0 43.8/50.5 66/74 70/80 60/68 199/199 68/76 70/80 62/70 201/201
104B+105A 19.9/26.5 55.2/63.8 80/91 80/100 73/83 199/199 82/93 90/100 75/85 201/201
HIGH
NONE − − 36 50 36 213 38 50 38 215
102A 4.9/6.5 13.6/15.6 36/36 50/50 36/36 213/213 38/38 50/50 38/38 215/215
104B 7.9/10.5 21.9/25.3 41/45 50/50 37/41 213/213 43/48 50/50 40/43 215/215
105A 12.0/16.0 33.4/38.5 55/62 60/70 51/56 213/213 58/64 60/70 53/59 215/215
104B+104B 15.8/21.0 43.8/50.5 68/77 70/80 63/70 213/213 71/79 80/80 65/72 215/215
104B+105A 19.9/26.5 55.2/63.8 83/93 90/100 76/86 213/213 85/96 90/100 78/88 215/215
460-
3-
60
STD
NONE − − 17 25 16 92 18 25 17 93
106A 6.0 7.2 17 25 16 92 18 25 17 93
108A 11.5 13.8 22 25 20 92 23 25 21 93
109A 14.0 16.8 26 30 23 92 27 30 24 93
108A+108A 23.0 27.7 39 40 36 92 41 45 37 93
108A+109A 25.5 30.7 43 45 39 92 44 45 40 93
MED
NONE − − 18 25 17 100 19 25 18 101
106A 6.0 7.2 18 25 17 100 19 25 18 101
108A 11.5 13.8 23 25 21 100 24 25 22 101
109A 14.0 16.8 27 30 24 100 28 30 25 101
108A+108A 23.0 27.7 40 40 37 100 42 45 38 101
108A+109A 25.5 30.7 44 45 40 100 45 45 41 101
HIGH
NONE − − 19 25 18 107 20 25 19 108
106A 6.0 7.2 19 25 18 107 20 25 19 108
108A 11.5 13.8 24 25 22 107 26 30 23 108
109A 14.0 16.8 28 30 25 107 29 30 27 108
108A+108A 23.0 27.7 42 45 38 107 43 45 39 108
108A+109A 25.5 30.7 45 50 41 107 47 50 43 108
575-
3-
60 STD NONE − − 12 15 12 63 14 20 14 65
MED NONE − − 13 20 12 74 15 20 15 76
HIGH NONE − − 13 20 12 74 15 20 15 76
Specifications subject to change without notice. 109513 21 3607 00
ELECTRICAL INFORMATION
Table 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S091
208/2
30-
3-
60
STD
NONE − − 40/40 60/60 38/38 208 44/43 60/60 43/42 212
117A 7.8/10.4 21.7/25.0 40/40 60/60 38/38 208/208 44/43 60/60 43/42 212/212110A 12.0/16.0 33.4/38.5 49/55 60/60 44/50 208/208 53/59 60/60 49/54 212/212
111A 18.6/24.8 51.7/59.7 72/81 80/90 65/74 208/208 76/86 80/90 70/79 212/212112A 24.0/32.0 66.7/77.0 90/103 90/110 83/94 208/208 95/108 100/110 87/99 212/212
112A+117A 31.8/42.4 88.4/102.0 117/134 125/150 108/123 208/208 122/139 125/150 112/127 212/212
MED
NONE − − 43/43 60/60 42/42 244 47/47 60/60 46/46 248117A 7.8/10.4 21.7/25.0 43/43 60/60 42/42 244/244 47/47 60/60 46/46 248/248
110A 12.0/16.0 33.4/38.5 53/59 60/60 48/54 244/244 57/64 60/70 52/58 248/248111A 18.6/24.8 51.7/59.7 76/85 80/90 69/78 244/244 80/90 80/90 73/83 248/248112A 24.0/32.0 66.7/77.0 94/107 100/110 86/98 244/244 99/112 100/125 91/102 248/248
112A+117A 31.8/42.4 88.4/102.0 121/138 125/150 111/127 244/244 126/143 150/150 116/131 248/248
HIGH
NONE − − 48/47 60/60 48/47 260 52/51 60/60 52/51 264
117A 7.8/10.4 21.7/25.0 48/48 60/60 48/47 260/260 52/52 60/60 52/51 264/264110A 12.0/16.0 33.4/38.5 59/64 60/70 54/59 260/260 64/69 70/70 58/63 264/264111A 18.6/24.8 51.7/59.7 82/91 90/100 75/83 260/260 87/96 90/100 79/88 264/264
112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 260/260 106/117 110/125 97/108 264/264112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 260/260 133/149 150/150 122/136 264/264
460-
3-
60
STD
NONE − − 20 30 19 122 22 30 21 124116A 13.9 16.7 24 30 22 122 27 30 24 124113A 16.5 19.8 28 30 26 122 31 35 28 124
114A 27.8 33.4 45 45 41 122 48 50 43 124115A 33.0 39.7 53 60 49 122 55 60 51 124
114A+116A 41.7 50.2 66 70 61 122 69 70 63 124
MED
NONE − − 22 30 21 140 23 30 23 142116A 13.9 16.7 27 30 24 140 29 30 26 142
113A 16.5 19.8 30 30 28 140 33 35 30 142114A 27.8 33.4 47 50 43 140 50 50 45 142
115A 33.0 39.7 55 60 50 140 58 60 53 142114A+116A 41.7 50.2 68 70 63 140 71 80 65 142
HIGH
NONE − − 24 30 23 148 26 30 25 150
116A 13.9 16.7 29 30 27 148 32 35 29 150113A 16.5 19.8 33 35 30 148 35 35 32 150
114A 27.8 33.4 50 50 46 148 52 60 48 150115A 33.0 39.7 58 60 53 148 60 60 55 150
114A+116A 41.7 50.2 71 80 65 148 73 80 67 150
575-
3-
60
STD
NONE − − 15 20 14 89 18 25 18 93118A 17.0 20.4 28 30 25 89 33 35 30 93
119A 34.0 40.9 54 60 49 89 58 60 53 93
MED
NONE − − 16 20 15 104 20 25 19 108118A 17.0 20.4 29 30 27 104 34 35 31 108
119A 34.0 40.9 55 60 50 104 60 60 55 108
HIGH
NONE − − 19 25 18 118 22 30 23 122
118A 17.0 20.4 33 35 30 118 38 40 34 122
119A 34.0 40.9 59 60 53 118 63 70 58 122
Specifications subject to change without notice.110 513 21 3607 00
ELECTRICAL INFORMATION
Table 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S090
208/2
30-
3-
60
STD
NONE − − 39/39 50/50 41/40 210 43/43 50/50 45/45 214
117A 7.8/10.4 21.7/25.0 39/39 50/50 41/40 210/210 43/43 50/50 45/45 214/214110A 12.0/16.0 33.4/38.5 49/55 50/60 44/50 210/210 53/59 60/60 49/54 214/214
111A 18.6/24.8 51.7/59.7 72/81 80/90 65/74 210/210 76/86 80/90 70/79 214/214112A 24.0/32.0 66.7/77.0 90/103 90/110 83/94 210/210 95/108 100/110 87/99 214/214
112A+117A 31.8/42.4 88.4/102.0 117/134 125/150 108/123 210/210 122/139 125/150 112/127 214/214
MED
NONE − − 42/42 50/50 44/44 246 46/46 50/50 49/49 250117A 7.8/10.4 21.7/25.0 42/42 50/50 44/44 246/246 46/47 50/50 49/49 250/250
110A 12.0/16.0 33.4/38.5 53/59 60/60 48/54 246/246 57/64 60/70 52/58 250/250111A 18.6/24.8 51.7/59.7 76/85 80/90 69/78 246/246 80/90 80/90 73/83 250/250112A 24.0/32.0 66.7/77.0 94/107 100/110 86/98 246/246 99/112 100/125 91/102 250/250
112A+117A 31.8/42.4 88.4/102.0 121/138 125/150 111/127 246/246 126/143 150/150 116/131 250/250
HIGH
NONE − − 48/47 60/50 50/49 262 51/51 60/60 55/54 266
117A 7.8/10.4 21.7/25.0 48/48 60/50 50/49 262/262 51/52 60/60 55/54 266/266110A 12.0/16.0 33.4/38.5 59/64 60/70 54/59 262/262 64/69 70/70 58/63 266/266111A 18.6/24.8 51.7/59.7 82/91 90/100 75/83 262/262 87/96 90/100 79/88 266/266
112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 262/262 106/117 110/125 97/108 266/266112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 262/262 133/149 150/150 122/136 266/266
460-
3-
60
STD
NONE − − 18 20 19 104 20 25 21 106116A 13.9 16.7 24 25 22 104 27 30 24 106113A 16.5 19.8 28 30 26 104 31 35 28 106
114A 27.8 33.4 45 45 41 104 48 50 43 106115A 33.0 39.7 53 60 49 104 55 60 51 106
114A+116A 41.7 50.2 66 70 61 104 69 70 63 106
MED
NONE − − 20 25 21 122 22 25 23 124116A 13.9 16.7 27 30 24 122 29 30 26 124
113A 16.5 19.8 30 30 28 122 33 35 30 124114A 27.8 33.4 47 50 43 122 50 50 45 124
115A 33.0 39.7 55 60 50 122 58 60 53 124114A+116A 41.7 50.2 68 70 63 122 71 80 65 124
HIGH
NONE − − 22 25 23 130 24 30 25 132
116A 13.9 16.7 29 30 27 130 32 35 29 132113A 16.5 19.8 33 35 30 130 35 35 32 132
114A 27.8 33.4 50 50 46 130 52 60 48 132115A 33.0 39.7 58 60 53 130 60 60 55 132
114A+116A 41.7 50.2 71 80 65 130 73 80 67 132
575-
3-
60
STD
NONE − − 13 15 13 77 17 20 17 81118A 17.0 20.4 28 30 25 77 33 35 30 81
119A 34.0 40.9 54 60 49 77 58 60 53 81
MED
NONE − − 14 15 14 92 18 20 19 96118A 17.0 20.4 29 30 27 92 34 35 31 96
119A 34.0 40.9 55 60 50 92 60 60 55 96
HIGH
NONE − − 17 20 17 106 21 25 22 110
118A 17.0 20.4 33 35 30 106 38 40 34 110
119A 34.0 40.9 59 60 53 106 63 70 58 110
Specifications subject to change without notice. 111513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZEMCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S101
208/2
30-
3-
60
STD
NONE − − 43/43 60/60 41/41 235 47/47 60/60 46/45 239
117A 7.8/10.4 21.7/25.0 43/43 60/60 41/41 235/235 47/47 60/60 46/45 239/239110A 12.0/16.0 33.4/38.5 49/55 60/60 44/50 235/235 53/59 60/60 49/54 239/239111A 18.6/24.8 51.7/59.7 72/81 80/90 65/74 235/235 76/86 80/90 70/79 239/239
112A 24.0/32.0 66.7/77.0 90/103 90/110 83/94 235/235 95/108 100/110 87/99 239/239112A+117A 31.8/42.4 88.4/102.0 117/134 125/150 108/123 235/235 122/139 125/150 112/127 239/239
MED
NONE − − 45/45 60/60 43/43 256 49/48 60/60 47/47 260117A 7.8/10.4 21.7/25.0 45/45 60/60 43/43 256/256 49/48 60/60 47/47 260/260110A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 256/256 56/62 60/70 51/56 260/260
111A 18.6/24.8 51.7/59.7 74/83 80/90 67/76 256/256 78/88 80/90 72/81 260/260112A 24.0/32.0 66.7/77.0 92/105 100/110 85/96 256/256 97/110 100/110 89/101 260/260
112A+117A 31.8/42.4 88.4/102.0 120/136 125/150 110/125 256/256 124/141 125/150 114/129 260/260
HIGH
NONE − − 49 60 47 285 52 60 52 289117A 7.8/10.4 21.7/25.0 49/49 60/60 47/47 285/285 52/52 60/60 52/52 289/289
110A 12.0/16.0 33.4/38.5 55/62 60/70 51/56 285/285 60/67 60/60 55/61 289/289111A 18.6/24.8 51.7/59.7 78/88 80/90 72/81 285/285 83/93 90/100 76/85 289/289
112A 24.0/32.0 66.7/77.0 97/110 100/110 89/101 285/285 102/115 110/125 93/105 289/289112A+117A 31.8/42.4 88.4/102.0 124/141 125/150 114/129 285/285 129/146 150/150 118/134 289/289
460-
3-
60
STD
NONE − − 21 30 19 122 22 30 22 124
116A 13.9 16.7 24 30 22 122 27 30 24 124113A 16.5 19.8 28 30 26 122 31 35 28 124
114A 27.8 33.4 45 45 41 122 48 50 43 124115A 33.0 39.7 53 60 49 122 55 60 51 124
114A+116A 41.7 50.2 66 70 61 122 69 70 63 124
MED
NONE − − 21 30 20 132 23 30 23 134116A 13.9 16.7 26 30 23 132 28 30 25 134
113A 16.5 19.8 29 30 27 132 32 35 29 134114A 27.8 33.4 46 50 42 132 49 50 44 134115A 33.0 39.7 54 60 50 132 57 60 52 134
114A+116A 41.7 50.2 67 70 62 132 70 70 64 134
HIGH
NONE − − 23 30 23 147 25 30 25 149
116A 13.9 16.7 28 30 25 147 30 30 27 149113A 16.5 19.8 32 35 29 147 34 35 31 149114A 27.8 33.4 49 50 45 147 51 60 47 149
115A 33.0 39.7 57 60 52 147 59 60 54 149114A+116A 41.7 50.2 70 70 64 147 72 80 66 149
575-
3-
60
STD
NONE − − 15 20 14 89 19 25 19 93118A 17.0 20.4 28 30 25 89 33 35 30 93119A 34.0 40.9 54 60 49 89 58 60 53 93
MED
NONE − − 16 20 15 93 19 25 19 97118A 17.0 20.4 28 30 26 93 33 35 30 97
119A 34.0 40.9 54 60 49 93 59 60 54 97
HIGH
NONE − − 16 25 16 104 20 25 20 108118A 17.0 20.4 29 30 27 104 34 35 31 108
119A 34.0 40.9 55 60 50 104 60 60 55 108
Specifications subject to change without notice.112 513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S102
208/2
30-
3-
60
STD
NONE − − 40/40 50/50 42/42 225 44/44 50/50 46/46 229117A 7.8/10.4 21.7/25.0 40/40 50/50 42/42 225/225 44/44 50/50 46/46 229/229110A 12.0/16.0 33.4/38.5 49/55 50/60 44/50 225/225 53/59 60/60 49/54 229/229
111A 18.6/24.8 51.7/59.7 72/81 80/90 65/74 225/225 76/86 80/90 70/79 229/229112A 24.0/32.0 66.7/77.0 90/103 90/110 83/94 225/225 95/108 100/110 87/99 229/229
112A+117A 31.8/42.4 88.4/102.0 117/134 125/150 108/123 225/225 122/139 125/150 112/127 229/229
MED
NONE − − 42/42 50/50 44/44 246 46/46 60/50 48/48 250117A 7.8/10.4 21.7/25.0 42/42 50/50 44/44 246/246 46/46 60/50 48/48 250/250
110A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 246/246 56/62 60/70 51/56 250/250111A 18.6/24.8 51.7/59.7 74/83 80/90 67/76 246/246 78/88 80/90 72/81 250/250
112A 24.0/32.0 66.7/77.0 92/105 100/110 85/96 246/246 97/110 100/110 89/101 250/250112A+117A 31.8/42.4 88.4/102.0 120/136 125/150 110/125 246/246 124/141 125/150 114/129 250/250
HIGH
NONE − − 46 50 48 275 50 60 52 279
117A 7.8/10.4 21.7/25.0 46/46 50/50 48/48 275/275 50/50 60/60 52/52 279/279110A 12.0/16.0 33.4/38.5 55/62 60/70 51/56 275/275 60/67 60/70 55/61 279/279
111A 18.6/24.8 51.7/59.7 78/88 80/90 72/81 275/275 83/93 90/100 76/85 279/279112A 24.0/32.0 66.7/77.0 97/110 100/110 89/101 275/275 102/115 110/125 93/105 279/279
112A+117A 31.8/42.4 88.4/102.0 124/141 125/150 114/129 275/275 129/146 150/150 118/134 279/279
460-
3-
60
STD
NONE − − 19 20 19 118 20 25 21 120116A 13.9 16.7 24 25 22 118 27 30 24 120
113A 16.5 19.8 28 30 26 118 31 35 28 120114A 27.8 33.4 45 45 41 118 48 50 43 120115A 33.0 39.7 53 60 49 118 55 60 51 120
114A+116A 41.7 50.2 66 70 61 118 69 70 63 120
MED
NONE − − 20 25 20 128 21 25 22 130
116A 13.9 16.7 26 30 23 128 28 30 25 130113A 16.5 19.8 29 30 27 128 32 35 29 130114A 27.8 33.4 46 50 42 128 49 50 44 130
115A 33.0 39.7 54 60 50 128 57 60 52 130114A+116A 41.7 50.2 67 70 62 128 70 70 64 130
HIGH
NONE − − 21 25 22 143 23 25 24 145116A 13.9 16.7 28 30 25 143 30 30 27 145113A 16.5 19.8 32 35 29 143 34 35 31 145
114A 27.8 33.4 49 50 45 143 51 60 47 145115A 33.0 39.7 57 60 52 143 59 60 54 145
114A+116A 41.7 50.2 70 70 64 143 72 80 66 145
575-
3-
60
STD
NONE − − 16 20 16 85 19 25 20 89118A 17.0 20.4 28 30 25 85 33 35 30 89
119A 34.0 40.9 54 60 49 85 58 60 53 89
MED
NONE − − 16 20 16 89 20 25 20 93
118A 17.0 20.4 28 30 26 89 33 35 30 93119A 34.0 40.9 54 60 49 89 59 60 54 93
HIGH
NONE − − 17 20 17 100 21 25 21 104
118A 17.0 20.4 29 30 27 100 34 35 31 104
119A 34.0 40.9 55 60 50 100 60 60 55 104
Specifications subject to change without notice. 113513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S121
208/2
30-
3-
60
STD
NONE − − 48/48 60/60 46/46 290 52/52 60/60 50/50 294117A 7.8/10.4 21.7/25.0 48/48 60/60 46/46 290/290 52/52 60/60 50/50 294/294
110A 12.0/16.0 33.4/38.5 51/57 60/60 46/52 290/290 56/62 60/80 51/56 294/294112A 24.0/32.0 66.7/77.0 92/105 100/110 85/96 290/290 97/110 100/110 89/101 294/294
112A+117A 31.8/42.4 88.4/102.0 120/136 125/150 110/125 290/290 124/141 125/150 114/129 294/294
112A+110A 37.6/50.0 104.2/120.3 139/129 150/150 128/146 290/290 144/134 150/150 132/150 294/294
MED
NONE − − 52 60 50 319 55 80 55 323
117A 7.8/10.4 21.7/25.0 52/52 60/60 50/50 319/319 55/55 80/80 55/55 323/323110A 12.0/16.0 33.4/38.5 55/62 60/80 51/56 319/319 60/67 80/80 55/61 323/323112A 24.0/32.0 66.7/77.0 97/110 100/110 89/101 319/319 102/115 110/125 93/105 323/323
112A+117A 31.8/42.4 88.4/102.0 124/141 125/150 114/129 319/319 129/146 150/150 118/134 323/323112A+110A 37.6/50.0 104.2/120.3 144/134 150/150 132/151 319/319 149/139 150/150 136/155 323/323
HIGH
NONE − − 55/54 80/80 54/53 321 58/58 80/80 58/57 325117A 7.8/10.4 21.7/25.0 55/54 80/80 54/53 321/321 58/58 80/80 58/57 325/325110A 12.0/16.0 33.4/38.5 59/64 80/80 54/59 321/321 64/69 80/80 58/63 325/325
112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 321/321 106/117 110/125 97/108 325/325112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 321/321 133/149 150/150 122/136 325/325
112A+110A 37.6/50.0 104.2/120.3 148/137 150/150 135/153 321/321 152/141 175/175 140/157 325/325
460-
3-
60
STD
NONE − − 26 40 25 146 28 40 27 148116A 13.9 16.7 26 40 25 146 28 40 27 148
113A 16.5 19.8 29 40 27 146 32 40 29 148115A 33.0 39.7 54 60 50 146 57 60 52 148
114A+116A 41.7 50.2 67 70 62 146 70 70 64 148115A+113A 50.0 60.1 65 70 73 146 67 70 75 148
MED
NONE − − 28 40 27 161 30 45 29 163
116A 13.9 16.7 28 40 27 161 30 45 29 163113A 16.5 19.8 32 40 29 161 34 45 31 163
115A 33.0 39.7 57 60 52 161 59 60 54 163114A+116A 41.7 50.2 70 70 64 161 72 80 66 163115A+113A 50.0 60.1 67 80 75 161 69 80 77 163
HIGH
NONE − − 29 45 28 162 31 45 30 164116A 13.9 16.7 29 45 28 162 32 45 30 164
113A 16.5 19.8 33 45 30 162 35 45 32 164115A 33.0 39.7 58 60 53 162 60 60 55 164
114A+116A 41.7 50.2 71 80 65 162 73 80 67 164
115A+113A 50.0 60.1 69 80 76 162 71 80 79 164
575-
3-
60
STD
NONE − − 19 30 18 95 23 30 22 99
118A 17.0 20.4 28 30 26 95 33 35 30 99119A 34.0 40.9 54 60 49 95 59 60 54 99
118A+119A 51.0 61.3 64 70 73 95 69 80 77 99
MED
NONE − − 20 30 19 106 24 30 23 110118A 17.0 20.4 29 30 27 106 34 35 31 110
119A 34.0 40.9 55 60 50 106 60 60 55 110118A+119A 51.0 61.3 65 70 74 106 70 80 78 110
HIGH
NONE − − 23 30 22 120 26 30 26 124
118A 17.0 20.4 33 35 30 120 38 40 34 124119A 34.0 40.9 59 60 53 120 63 70 58 124
118A+119A 51.0 61.3 69 80 77 120 74 80 81 124
Specifications subject to change without notice.114 513 21 3607 00
ELECTRICAL INFORMATION
Table 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S120
208/2
30-
3-
60
STD
NONE − − 46/46 60/60 48/47 285 50/49 60/60 52/52 289117A 7.8/10.4 21.7/25.0 46/46 60/60 48/47 285/285 50/49 60/60 52/52 289/289110A 12.0/16.0 33.4/38.5 51/57 60/60 48/52 285/285 56/62 60/70 52/56 289/289
112A 24.0/32.0 66.7/77.0 92/105 100/110 85/96 285/285 97/110 100/110 89/101 289/289112A+117A 31.8/42.4 88.4/102.0 120/136 125/150 110/125 285/285 124/141 125/150 114/129 289/289
112A+110A 37.6/50.0 104.2/120.3 139/129 150/150 128/146 285/285 144/134 150/150 132/150 289/289
MED
NONE − − 50 60 52 314 53 60 56 318117A 7.8/10.4 21.7/25.0 50/50 60/60 52/52 314/314 53/53 60/60 56/56 318/318
110A 12.0/16.0 33.4/38.5 55/62 60/70 52/56 314/314 60/67 60/70 56/61 318/318112A 24.0/32.0 66.7/77.0 97/110 100/110 89/101 314/314 102/115 110/125 93/105 318/318
112A+117A 31.8/42.4 88.4/102.0 124/141 125/150 114/129 314/314 129/146 150/150 118/134 318/318112A+110A 37.6/50.0 104.2/120.3 144/134 150/150 132/151 314/314 149/139 150/150 136/155 318/318
HIGH
NONE − − 53/52 60/60 55/54 316 56/55 60/60 60/59 320
117A 7.8/10.4 21.7/25.0 53/52 60/60 55/54 316/316 56/55 60/60 60/59 320/320110A 12.0/16.0 33.4/38.5 59/64 60/70 55/59 316/316 64/69 70/70 60/63 320/320
112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 316/316 106/117 110/125 97/108 320/320112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 316/316 133/149 150/150 122/136 320/320112A+110A 37.6/50.0 104.2/120.3 148/137 150/150 135/153 316/316 152/141 175/175 140/157 320/320
460-
3-
60
STD
NONE − − 23 30 23 136 25 30 26 138116A 13.9 16.7 26 30 23 136 28 30 26 138
113A 16.5 19.8 29 30 27 136 32 35 29 138115A 33.0 39.7 54 60 50 136 57 60 52 138
114A+116A 41.7 50.2 67 70 62 136 70 70 64 138
115A+113A 50.0 60.1 65 70 73 136 67 70 75 138
MED
NONE − − 25 30 26 151 26 30 28 153
116A 13.9 16.7 28 30 26 151 30 30 28 153113A 16.5 19.8 32 35 29 151 34 35 31 153115A 33.0 39.7 57 60 52 151 59 60 54 153
114A+116A 41.7 50.2 70 70 64 151 72 80 66 153115A+113A 50.0 60.1 67 80 75 151 69 80 77 153
HIGH
NONE − − 26 30 27 152 28 30 29 154116A 13.9 16.7 29 30 27 152 32 35 29 154113A 16.5 19.8 33 35 30 152 35 35 32 154
115A 33.0 39.7 58 60 53 152 60 60 55 154114A+116A 41.7 50.2 71 80 65 152 73 80 67 154
115A+113A 50.0 60.1 69 80 76 152 71 80 79 154
575-
3-
60
STD
NONE − − 17 20 17 93 20 25 21 97118A 17.0 20.4 28 30 26 93 33 35 30 97
119A 34.0 40.9 54 60 49 93 59 60 54 97118A+119A 51.0 61.3 64 70 73 93 69 80 77 97
MED
NONE − − 17 20 18 104 21 25 22 108118A 17.0 20.4 29 30 27 104 34 35 31 108119A 34.0 40.9 55 60 50 104 60 60 55 108
118A+119A 51.0 61.3 65 70 74 104 70 80 78 108
HIGH
NONE − − 20 25 21 118 24 30 25 122
118A 17.0 20.4 33 35 30 118 38 40 34 122119A 34.0 40.9 59 60 53 118 63 70 58 122
118A+119A 51.0 61.3 69 80 77 118 74 80 81 122
Specifications subject to change without notice. 115513 21 3607 00
ELECTRICAL INFORMATION
Table 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor
(Units Produced On or After 02/16/2015)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S150
208/2
30-
3-
60
208/2
30-
3-
60
STD
NONE − − 63/63 80/80 65/65 389 66/66 80/80 69/69 393
117A 7.8/10.4 21.7/25.0 63/63 80/80 65/65 389/389 66/66 80/80 69/69 393/393110A 12.0/16.0 33.4/38.5 63/63 80/80 65/65 389/389 66/66 80/80 69/69 393/393
112A 24.0/32.0 66.7/77.0 94/107 100/110 86/98 389/389 99/112 100/125 91/102 393/393112A+117A 31.8/42.4 88.4/102.0 121/138 125/150 111/127 389/389 126/143 150/150 116/131 393/393112A+110A 37.6/50.0 104.2/120.3 141/131 150/150 129/148 389/389 146/136 150/150 134/152 393/393
MED
NONE − − 65 80 68 403 69 80 72 407117A 7.8/10.4 21.7/25.0 65/65 80/80 68/68 403/403 69/69 80/80 72/72 407/407
110A 12.0/16.0 33.4/38.5 65/65 80/80 68/68 403/403 69/69 80/80 72/72 407/407112A 24.0/32.0 66.7/77.0 97/110 100/110 89/101 403/403 102/115 110/125 93/105 407/407
112A+117A 31.8/42.4 88.4/102.0 124/141 125/150 114/129 403/403 129/146 150/150 118/134 407/407
112A+110A 37.6/50.0 104.2/120.3 144/134 150/150 132/151 403/403 149/139 150/150 136/155 407/407
HIGH
NONE − − 68/67 80/80 71/70 405 72/71 80/80 75/74 409
117A 7.8/10.4 21.7/25.0 68/67 80/80 71/70 405/405 72/71 80/80 75/74 409/409110A 12.0/16.0 33.4/38.5 68/67 80/80 71/70 405/405 72/71 80/80 75/74 409/409112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 405/405 106/117 110/125 97/108 409/409
112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 405/405 133/149 150/150 122/136 409/409112A+110A 37.6/50.0 104.2/120.3 148/137 150/150 135/153 405/405 152/141 175/175 140/157 409/409
460-
3-
60
STD
NONE − − 29 35 30 193 31 40 32 195116A 13.9 16.7 29 35 30 193 31 40 32 195113A 16.5 19.8 30 35 30 193 33 40 32 195
115A 33.0 39.7 55 60 50 193 58 60 53 195114A+116A 41.7 50.2 68 70 63 193 71 80 65 195
115A+113A 50.0 60.1 66 70 74 193 68 80 76 195
MED
NONE − − 30 40 31 200 32 40 33 202116A 13.9 16.7 30 40 31 200 32 40 33 202
113A 16.5 19.8 32 40 31 200 34 40 33 202115A 33.0 39.7 57 60 52 200 59 60 54 202
114A+116A 41.7 50.2 70 70 64 200 72 80 66 202115A+113A 50.0 60.1 67 80 75 200 69 80 77 202
HIGH
NONE − − 31 40 33 201 33 40 35 203
116A 13.9 16.7 31 40 33 201 33 40 35 203113A 16.5 19.8 33 40 33 201 35 40 35 203
115A 33.0 39.7 58 60 53 201 60 60 55 203114A+116A 41.7 50.2 71 80 65 201 73 80 67 203115A+113A 50.0 60.1 69 80 76 201 71 80 79 203
575-
3-
60
STD
NONE − − 22 25 23 147 26 30 27 151118A 17.0 20.4 29 30 27 147 34 35 31 151
119A 34.0 40.9 55 60 50 147 60 60 55 151118A+119A 51.0 61.3 65 70 74 147 70 80 78 151
MED
NONE − − 22 25 23 147 26 30 27 151
118A 17.0 20.4 29 30 27 147 34 35 31 151119A 34.0 40.9 55 60 50 147 60 60 55 151
118A+119A 51.0 61.3 65 70 74 147 70 80 78 151
HIGH
NONE − − 25 30 26 161 29 35 30 165118A 17.0 20.4 33 35 30 161 38 40 34 165
119A 34.0 40.9 59 60 53 161 63 70 58 165118A+119A 51.0 61.3 69 80 77 161 74 80 81 165
Specifications subject to change without notice.116 513 21 3607 00
ELECTRICAL INFORMATIONTable 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor
(Units Produced On or Before 02/15/2015)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S150
208/2
30-
3-
60
208/2
30-
3-
60
STD
NONE − − 62/62 80/80 64/64 376 66/66 80/80 69/69 380
117A 7.8/10.4 21.7/25.0 62/62 80/80 64/64 376/376 66/66 80/80 69/69 380/380
110A 12.0/16.0 33.4/38.5 62/62 80/80 64/64 376/376 66/66 80/80 69/69 380/380112A 24.0/32.0 66.7/77.0 94/107 100/110 86/98 376/376 99/112 100/125 91/102 380/380
112A+117A 31.8/42.4 88.4/102.0 121/138 125/150 111/127 376/376 126/143 150/150 116/131 380/380112A+110A 37.6/50.0 104.2/120.3 141/131 150/150 129/148 376/376 146/136 150/150 134/152 380/380
MED
NONE − − 64 80 67 390 68 80 71 394
117A 7.8/10.4 21.7/25.0 64/64 80/80 67/67 390/390 68/68 80/80 71/71 394/394110A 12.0/16.0 33.4/38.5 64/64 80/80 67/67 390/390 68/68 80/80 71/71 394/394112A 24.0/32.0 66.7/77.0 97/110 100/110 89/101 390/390 102/115 110/125 93/105 394/394
112A+117A 31.8/42.4 88.4/102.0 124/141 125/150 114/129 390/390 129/146 150/150 118/134 394/394112A+110A 37.6/50.0 104.2/120.3 144/134 150/150 132/151 390/390 149/139 150/150 136/155 394/394
HIGH
NONE − − 67/66 80/80 70/69 392 71/70 80/80 75/74 396
117A 7.8/10.4 21.7/25.0 67/66 80/80 70/69 392/392 71/70 80/80 75/74 396/396110A 12.0/16.0 33.4/38.5 67/66 80/80 70/69 392/392 71/70 80/80 75/74 396/396
112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 392/392 106/117 110/125 97/108 396/396112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 392/392 133/149 150/150 122/136 396/396
112A+110A 37.6/50.0 104.2/120.3 148/137 150/150 135/153 392/392 152/141 175/175 140/157 396/396
460-
3-
60
STD
NONE − − 31 40 32 189 33 40 34 191
116A 13.9 16.7 31 40 32 189 33 40 34 191
113A 16.5 19.8 31 40 32 189 33 40 34 191115A 33.0 39.7 55 60 50 189 58 60 53 191
114A+116A 41.7 50.2 68 70 63 189 71 80 65 191115A+113A 50.0 60.1 66 70 74 189 68 80 76 191
MED
NONE − − 32 40 33 196 34 40 35 198
116A 13.9 16.7 32 40 33 196 34 40 35 198113A 16.5 19.8 32 40 33 196 34 40 35 198115A 33.0 39.7 57 60 52 196 59 60 54 198
114A+116A 41.7 50.2 70 70 64 196 72 80 66 198115A+113A 50.0 60.1 67 80 75 196 69 80 77 198
HIGH
NONE − − 33 40 34 197 35 40 36 199
116A 13.9 16.7 33 40 34 197 35 40 36 199113A 16.5 19.8 33 40 34 197 35 40 36 199
115A 33.0 39.7 58 60 53 197 60 60 55 199114A+116A 41.7 50.2 71 80 65 197 73 80 67 199
115A+113A 50.0 60.1 69 80 76 197 71 80 79 199
575-
3-
60
STD
NONE − − 23 30 23 142 27 30 28 146
118A 17.0 20.4 29 30 27 142 34 35 31 146
119A 34.0 40.9 55 60 50 142 60 60 55 146118A+119A 51.0 61.3 65 70 74 142 70 80 78 146
MED
NONE − − 23 30 23 142 27 30 28 146
118A 17.0 20.4 29 30 27 142 34 35 31 146119A 34.0 40.9 55 60 50 142 60 60 55 146
118A+119A 51.0 61.3 65 70 74 142 70 80 78 146
HIGH
NONE − − 26 30 27 156 29 35 31 160
118A 17.0 20.4 33 35 30 156 38 40 34 160
119A 34.0 40.9 59 60 53 156 63 70 58 160118A+119A 51.0 61.3 69 80 77 156 74 80 81 160
Specifications subject to change without notice. 117513 21 3607 00
ELECTRICAL INFORMATION
Table 28 − Unit Wire/Fuse or HACR Breaker Sizing Data with Single Speed Indoor Fan Motor (cont.)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEAT-ER***A00
Nom(kW) FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S180
208/2
30-
3-
60
STD
NONE − − 70/70 80/80 72/72 412 73/73 80/80 77/77 416
291A 12.4/16.5 34.4/39.7 70/70 80/80 72/72 412/412 73/73 80/80 77/77 416/416
294A 25.2/33.5 69.9/80.6 98/112 100/125 90/102 412/412 103/116 110/125 94/107 416/416
288A+294A 32.7/43.5 90.7/104.7 124/142 125/150 114/130 412/412 129/146 150/150 118/134 416/416
291A+294A 37.6/50.0 104.3/120.3 141/131 150/150 130/148 412/412 146/136 150/150 134/152 416/416
294A+294A 50.3/67.0 139.7/161.2 151/172 175/200 170/195 412/412 155/177 175/200 175/199 416/416
MED
NONE − − 72 80 75 426 76 100 79 430
291A 12.4/16.5 34.4/39.7 72/72 80/80 75/75 426/426 76/76 100/100 79/79 430/430
294A 25.2/33.5 69.9/80.6 101/114 110/125 93/105 426/426 106/119 110/125 97/109 430/430
288A+294A 32.7/43.5 90.7/104.7 127/145 150/150 116/133 426/426 132/149 150/150 121/137 430/430
291A+294A 37.6/50.0 104.3/120.3 144/134 150/150 132/151 426/426 149/139 150/150 137/155 430/430
294A+294A 50.3/67.0 139.7/161.2 153/175 175/200 173/198 426/426 158/180 175/200 177/202 430/430
HIGH
NONE − − 82 100 86 432 85 100 91 436
291A 12.4/16.5 34.4/39.7 82/82 100/100 86/86 432/432 85/85 100/100 91/91 436/436
294A 25.2/33.5 69.9/80.6 113/127 125/150 104/116 432/432 118/131 125/150 108/121 436/436
288A+294A 32.7/43.5 90.7/104.7 139/157 150/175 128/144 432/432 144/162 150/175 132/148 436/436
291A+294A 37.6/50.0 104.3/120.3 156/146 175/175 143/162 432/432 161/151 175/175 148/166 436/436
294A+294A 50.3/67.0 139.7/161.2 166/187 175/225 184/209 432/432 170/192 175/225 188/213 436/436
460-
3-
60
STD
NONE − − 35 45 36 242 37 45 38 244
292A 16.5 19.9 35 45 36 242 37 45 38 244
295A 33.5 40.3 56 60 51 242 58 60 53 244
289A+295A 43.5 52.3 71 80 65 242 73 80 67 244
292A+295A 50.0 60.2 66 70 74 242 68 80 76 244
295A+295A 67.0 80.6 86 100 98 242 89 100 100 244
MED
NONE − − 36 45 38 249 38 50 40 251
292A 16.5 19.9 36 45 38 249 38 50 40 251
295A 33.5 40.3 57 60 52 249 60 60 55 251
289A+295A 43.5 52.3 72 80 66 249 75 80 68 251
292A+295A 50.0 60.2 67 80 75 249 70 80 77 251
295A+295A 67.0 80.6 88 100 99 249 90 100 101 251
HIGH
NONE − − 41 50 43 252 43 50 45 254
292A 16.5 19.9 41 50 43 252 43 50 45 254
295A 33.5 40.3 64 70 58 252 66 70 60 254
289A+295A 43.5 52.3 79 80 72 252 81 90 74 254
292A+295A 50.0 60.2 73 80 81 252 76 80 83 254
295A+295A 67.0 80.6 94 100 104 252 96 100 106 254
575-
3-
60
STD
NONE − − 27 30 28 184 31 40 32 188
293A 16.5 15.9 27 30 28 184 31 40 32 188
296A 33.5 32.2 44 45 40 184 49 50 45 188
290A+296A 43.5 41.8 56 60 51 184 61 70 56 188
293A+296A 50.0 48.1 52 60 59 184 57 60 63 188
296A+296A 67.0 64.4 68 80 77 184 73 80 82 188
MED
NONE − − 27 30 28 184 31 40 32 188
293A 16.5 15.9 27 30 28 184 31 40 32 188
296A 33.5 32.2 44 45 40 184 49 50 45 188
290A+296A 43.5 41.8 56 60 51 184 61 70 56 188
293A+296A 50.0 48.1 52 60 59 184 57 60 63 188
296A+296A 67.0 64.4 68 80 77 184 73 80 82 188
HIGH
NONE − − 33 40 35 196 37 45 39 200
293A 16.5 15.9 33 40 35 196 37 45 39 200
296A 33.5 32.2 52 60 47 196 57 60 52 200
290A+296A 43.5 41.8 64 70 58 196 69 70 63 200
293A+296A 50.0 48.1 60 70 66 196 65 70 70 200
296A+296A 67.0 64.4 76 80 84 196 81 90 89 200
Specifications subject to change without notice.118 513 21 3607 00
ELECTRICAL INFORMATIONTable 29 – UNIT WIRE/FUSE OR HACR BREAKER SIZING DATA WITH 2 SPEED INDOOR FAN MOTOR
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S090
208/2
30-
3-
60
STD
NONE − − 40/40 50/50 41/41 197 44/43 50/50 46/46 201117A 7.8/10.4 21.7/25.0 40/40 50/50 41/41 197/197 44/43 50/50 46/46 201/201110A 12.0/16.0 33.4/38.5 49/56 50/60 45/51 197/197 54/60 60/60 49/55 201/201
111A 18.6/24.8 51.7/59.7 72/82 80/90 66/75 197/197 77/87 80/90 70/79 201/201112A 24.0/32.0 66.7/77.0 91/104 100/110 83/95 197/197 96/108 100/110 88/99 201/201
112A+117A 31.8/42.4 88.4/102.0 118/135 125/150 108/124 197/197 123/140 125/150 113/128 201/201
MED
NONE − − 43/42 50/50 45/44 227 46/46 50/50 49/48 231117A 7.8/10.4 21.7/25.0 43/42 50/50 45/44 227/227 46/46 50/50 49/48 231/231
110A 12.0/16.0 33.4/38.5 53/58 60/60 48/53 227/227 58/63 60/70 53/58 231/231111A 18.6/24.8 51.7/59.7 76/85 80/90 69/78 227/227 81/90 90/90 74/82 231/231
112A 24.0/32.0 66.7/77.0 95/106 100/110 87/98 227/227 99/111 100/125 91/102 231/231112A+117A 31.8/42.4 88.4/102.0 122/138 125/150 112/126 227/227 126/142 150/150 116/131 231/231
HIGH
NONE − − 48/47 60/50 50/49 262 51/51 60/60 55/54 266
117A 7.8/10.4 21.7/25.0 48/48 60/50 50/49 262/262 51/52 60/60 55/54 266/266110A 12.0/16.0 33.4/38.5 59/64 60/70 54/59 262/262 64/69 70/70 58/63 266/266
111A 18.6/24.8 51.7/59.7 82/91 90/100 75/83 262/262 87/96 90/100 79/88 266/266112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 262/262 106/117 110/125 97/108 266/266
112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 262/262 133/149 150/150 122/136 266/266
460-
3-
60
STD
NONE − − 19 20 19 97 20 25 21 99116A 13.9 16.7 25 25 23 97 27 30 25 99
113A 16.5 19.8 29 30 26 97 31 35 28 99114A 27.8 33.4 46 50 42 97 48 50 44 99115A 33.0 39.7 54 60 49 97 56 60 51 99
114A+116A 41.7 50.2 67 70 61 97 69 70 63 99
MED
NONE − − 20 25 20 113 21 25 22 115
116A 13.9 16.7 26 30 24 113 28 30 26 115113A 16.5 19.8 30 30 27 113 32 35 29 115114A 27.8 33.4 47 50 43 113 49 50 45 115
115A 33.0 39.7 55 60 50 113 57 60 52 115114A+116A 41.7 50.2 68 70 62 113 70 70 64 115
HIGH
NONE − − 22 25 23 130 24 30 25 132116A 13.9 16.7 29 30 27 130 32 35 29 132113A 16.5 19.8 33 35 30 130 35 35 32 132
114A 27.8 33.4 50 50 46 130 52 60 48 132115A 33.0 39.7 58 60 53 130 60 60 55 132
114A+116A 41.7 50.2 71 80 65 130 73 80 67 132
575-
3-
60
STD
NONE − − 14 15 14 79 18 20 19 83118A 17.0 20.4 29 30 27 79 34 35 31 83
119A 34.0 40.9 55 60 50 79 60 60 55 83
MED
NONE − − 16 20 16 92 19 25 21 96
118A 17.0 20.4 32 35 29 92 36 40 33 96119A 34.0 40.9 57 60 52 92 62 70 57 96
HIGH
NONE − − 18 20 18 106 22 25 23 110
118A 17.0 20.4 34 35 31 106 38 40 35 110
119A 34.0 40.9 59 60 54 106 64 70 59 110
Specifications subject to change without notice. 119513 21 3607 00
ELECTRICAL INFORMATIONTable 29 − UNIT WIRE/FUSE OR HACR BREAKER SIZING DATA WITH 2 SPEED INDOOR FAN MOTOR (cont.)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZEMCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S102
208/2
30-
3-
60
STD
NONE − − 41/41 50/50 43/42 212 45/45 50/50 47/47 216
117A 7.8/10.4 21.7/25.0 41/41 50/50 43/42 212/212 45/45 50/50 47/47 216/216110A 12.0/16.0 33.4/38.5 49/56 50/60 45/51 212/212 54/60 60/60 49/55 216/216111A 18.6/24.8 51.7/59.7 72/82 80/90 66/75 212/212 77/87 80/90 70/79 216/216
112A 24.0/32.0 66.7/77.0 91/104 100/110 83/95 212/212 96/108 100/110 88/99 216/216112A+117A 31.8/42.4 88.4/102.0 118/135 125/150 108/124 212/212 123/140 125/150 113/128 216/216
MED
NONE − − 42/42 50/50 44/44 216 46/46 60/50 48/48 220
117A 7.8/10.4 21.7/25.0 42/42 50/50 44/44 216/216 46/46 60/50 48/48 220/220110A 12.0/16.0 33.4/38.5 51/57 60/60 47/52 216/216 56/62 60/70 51/56 220/220
111A 18.6/24.8 51.7/59.7 74/84 80/90 68/76 216/216 79/88 80/90 72/81 220/220112A 24.0/32.0 66.7/77.0 93/105 100/110 85/96 216/216 97/110 100/110 89/101 220/220
112A+117A 31.8/42.4 88.4/102.0 120/136 125/150 110/125 216/216 125/141 125/150 114/129 220/220
HIGH
NONE − − 46/45 60/50 48/47 266 50/49 60/60 53/52 270
117A 7.8/10.4 21.7/25.0 46/45 60/50 48/47 266/266 50/49 60/60 53/52 270/270110A 12.0/16.0 33.4/38.5 56/61 60/70 51/56 266/266 60/66 60/70 55/60 270/270
111A 18.6/24.8 51.7/59.7 79/87 80/90 72/80 266/266 83/92 90/100 76/84 270/270112A 24.0/32.0 66.7/77.0 97/109 100/110 89/100 266/266 102/114 110/125 93/104 270/270
112A+117A 31.8/42.4 88.4/102.0 124/140 125/150 114/129 266/266 129/145 150/150 118/133 270/270
460-
3-
60
STD
NONE − − 19 25 20 111 21 25 22 113
116A 13.9 16.7 25 25 23 111 27 30 25 113
113A 16.5 19.8 29 30 26 111 31 35 28 113114A 27.8 33.4 46 50 42 111 48 50 44 113
115A 33.0 39.7 54 60 49 111 56 60 51 113114A+116A 41.7 50.2 67 70 61 111 69 70 63 113
MED
NONE − − 20 25 21 114 22 25 23 116
116A 13.9 16.7 26 30 24 114 28 30 26 116113A 16.5 19.8 30 30 27 114 32 35 29 116114A 27.8 33.4 47 50 43 114 49 50 45 116
115A 33.0 39.7 55 60 50 114 57 60 52 116114A+116A 41.7 50.2 68 70 62 114 70 70 64 116
HIGH
NONE − − 21 25 22 139 23 25 24 141
116A 13.9 16.7 27 30 25 139 30 30 27 141113A 16.5 19.8 31 35 28 139 34 35 30 141
114A 27.8 33.4 48 50 44 139 51 60 46 141115A 33.0 39.7 56 60 51 139 58 60 53 141
114A+116A 41.7 50.2 69 70 63 139 72 80 65 141
575-
3-
60
STD
NONE − − 17 20 17 87 21 25 21 91
118A 17.0 20.4 29 30 27 87 34 35 31 91
119A 34.0 40.9 55 60 50 87 60 60 55 91
MED
NONE − − 17 20 18 91 21 25 22 95
118A 17.0 20.4 30 30 27 91 35 35 32 95
119A 34.0 40.9 56 60 51 91 61 70 55 95
HIGH
NONE − − 18 20 19 100 22 25 23 104
118A 17.0 20.4 32 35 29 100 36 40 33 104
119A 34.0 40.9 57 60 52 100 62 70 57 104
Specifications subject to change without notice.120 513 21 3607 00
ELECTRICAL INFORMATIONTable 29 − UNIT WIRE/FUSE OR HACR BREAKER SIZING DATA WITH 2 SPEED INDOOR FAN MOTOR (cont.)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00Nom(kW) FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZEMCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S120
208/2
30-
3-
60
STD
NONE − − 46/46 60/60 48/47 255 50/50 60/60 52/52 259117A 7.8/10.4 21.7/25.0 46/46 60/60 48/47 255/255 50/50 60/60 52/52 259/259110A 12.0/16.0 33.4/38.5 51/57 60/60 48/52 255/255 56/62 60/70 52/56 259/259
112A 24.0/32.0 66.7/77.0 93/105 100/110 85/96 255/255 97/110 100/110 89/101 259/259112A+117A 31.8/42.4 88.4/102.0 120/136 125/150 110/125 255/255 125/141 125/150 114/129 259/259
112A+110A 37.6/50.0 104.2/120.3 140/129 150/150 128/146 255/255 144/134 150/150 132/151 259/259
MED
NONE − − 50/49 60/60 52/51 305 54/53 60/60 56/55 309117A 7.8/10.4 21.7/25.0 50/49 60/60 52/51 305/305 54/53 60/60 56/55 309/309
110A 12.0/16.0 33.4/38.5 56/61 60/70 52/56 305/305 60/66 60/70 56/60 309/309112A 24.0/32.0 66.7/77.0 97/109 100/110 89/100 305/305 102/114 110/125 93/104 309/309
112A+117A 31.8/42.4 88.4/102.0 124/140 125/150 114/129 305/305 129/145 150/150 118/133 309/309112A+110A 37.6/50.0 104.2/120.3 144/133 150/150 132/150 305/305 149/138 150/150 137/154 309/309
HIGH
NONE − − 53/52 60/60 55/54 316 56/55 60/60 60/59 320
117A 7.8/10.4 21.7/25.0 53/52 60/60 55/54 316/316 56/55 60/60 60/59 320/320110A 12.0/16.0 33.4/38.5 59/64 60/70 55/59 316/316 64/69 70/70 60/63 320/320
112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 316/316 106/117 110/125 97/108 320/320112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 316/316 133/149 150/150 122/136 320/320112A+110A 37.6/50.0 104.2/120.3 148/137 150/150 135/153 316/316 152/141 175/175 140/157 320/320
460-
3-
60
STD
NONE − − 23 30 24 122 25 30 26 124116A 13.9 16.7 26 30 24 122 28 30 26 124
113A 16.5 19.8 30 30 27 122 32 35 29 124115A 33.0 39.7 55 60 50 122 57 60 52 124
114A+116A 41.7 50.2 68 70 62 122 70 70 64 124
115A+113A 50.0 60.1 65 70 73 122 68 80 76 124
MED
NONE − − 24 30 25 147 26 30 27 149
116A 13.9 16.7 27 30 25 147 30 30 27 149113A 16.5 19.8 31 35 28 147 34 35 30 149115A 33.0 39.7 56 60 51 147 58 60 53 149
114A+116A 41.7 50.2 69 70 63 147 72 80 65 149115A+113A 50.0 60.1 67 80 75 147 69 80 77 149
HIGH
NONE − − 26 30 27 152 28 30 29 154116A 13.9 16.7 29 30 27 152 32 35 29 154113A 16.5 19.8 33 35 30 152 35 35 32 154
115A 33.0 39.7 58 60 53 152 60 60 55 154114A+116A 41.7 50.2 71 80 65 152 73 80 67 154
115A+113A 50.0 60.1 69 80 76 152 71 80 79 154
575-
3-
60
STD
NONE − − 18 20 19 95 22 25 23 99118A 17.0 20.4 30 30 27 95 35 35 32 99
119A 34.0 40.9 56 60 51 95 61 70 55 99118A+119A 51.0 61.3 66 70 75 95 71 80 79 99
MED
NONE − − 19 25 20 104 23 25 24 108118A 17.0 20.4 32 35 29 104 36 40 33 108119A 34.0 40.9 57 60 52 104 62 70 57 108
118A+119A 51.0 61.3 67 80 76 104 72 80 80 108
HIGH
NONE − − 21 25 22 118 25 30 26 122
118A 17.0 20.4 34 35 31 118 38 40 35 122119A 34.0 40.9 59 60 54 118 64 70 59 122
118A+119A 51.0 61.3 70 80 78 118 74 80 82 122
Specifications subject to change without notice. 121513 21 3607 00
ELECTRICAL INFORMATION
Table 29 − UNIT WIRE/FUSE OR HACR BREAKER SIZING DATA WITH 2 SPEED INDOOR FAN MOTOR (cont.)
(Units Produced On or After 02/16/2015)
UN
IT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00Nom(kW) FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S150
208/2
30-
3-
60
STD
NONE − − 63/62 80/80 65/64 370 67/66 80/80 70/69 374117A 7.8/10.4 21.7/25.0 63/62 80/80 65/64 370/370 67/66 80/80 70/69 374/374
110A 12.0/16.0 33.4/38.5 63/62 80/80 65/64 370/370 67/66 80/80 70/69 374/374112A 24.0/32.0 66.7/77.0 95/106 100/110 87/98 370/370 99/111 100/125 91/102 374/374
112A+117A 31.8/42.4 88.4/102.0 122/138 125/150 112/126 370/370 126/142 150/150 116/131 374/374112A+110A 37.6/50.0 104.2/120.3 141/131 150/150 130/147 370/370 146/135 150/150 134/152 374/374
MED
NONE − − 65/64 80/80 68/67 394 69/68 80/80 72/71 398
117A 7.8/10.4 21.7/25.0 65/64 80/80 68/67 394/394 69/68 80/80 72/71 398/398110A 12.0/16.0 33.4/38.5 65/64 80/80 68/67 394/394 69/68 80/80 72/71 398/398
112A 24.0/32.0 66.7/77.0 97/109 100/110 89/100 394/394 102/114 110/125 93/104 398/398112A+117A 31.8/42.4 88.4/102.0 124/140 125/150 114/129 394/394 129/145 150/150 118/133 398/398112A+110A 37.6/50.0 104.2/120.3 144/133 150/150 132/150 394/394 149/138 150/150 137/154 398/398
HIGH
NONE − − 68/67 80/80 71/70 405 72/71 80/80 75/74 409117A 7.8/10.4 21.7/25.0 68/67 80/80 71/70 405/405 72/71 80/80 75/74 409/409
110A 12.0/16.0 33.4/38.5 68/67 80/80 71/70 405/405 72/71 80/80 75/74 409/409112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 405/405 106/117 110/125 97/108 409/409
112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 405/405 133/149 150/150 122/136 409/409
112A+110A 37.6/50.0 104.2/120.3 148/137 150/150 135/153 405/405 152/141 175/175 140/157 409/409
460-
3-
60
STD
NONE − − 29 35 30 184 31 40 32 186
116A 13.9 16.7 29 35 30 184 31 40 32 186113A 16.5 19.8 30 35 30 184 32 40 32 186115A 33.0 39.7 55 60 50 184 57 60 52 186
114A+116A 41.7 50.2 68 70 62 184 70 70 64 186115A+113A 50.0 60.1 65 70 73 184 68 80 76 186
MED
NONE − − 30 40 31 196 32 40 33 198116A 13.9 16.7 30 40 31 196 32 40 33 198113A 16.5 19.8 31 40 31 196 34 40 33 198
115A 33.0 39.7 56 60 51 196 58 60 53 198114A+116A 41.7 50.2 69 70 63 196 72 80 65 198
115A+113A 50.0 60.1 67 80 75 196 69 80 77 198
HIGH
NONE − − 31 40 33 201 33 40 35 203116A 13.9 16.7 31 40 33 201 33 40 35 203
113A 16.5 19.8 33 40 33 201 35 40 35 203115A 33.0 39.7 58 60 53 201 60 60 55 203
114A+116A 41.7 50.2 71 80 65 201 73 80 67 203115A+113A 50.0 60.1 69 80 76 201 71 80 79 203
575-
3-
60
STD
NONE − − 24 30 24 147 27 30 29 151
118A 17.0 20.4 32 35 29 147 36 40 33 151119A 34.0 40.9 57 60 52 147 62 70 57 151
118A+119A 51.0 61.3 67 80 76 147 72 80 80 151
MED
NONE − − 24 30 24 147 27 30 29 151118A 17.0 20.4 32 35 29 147 36 40 33 151
119A 34.0 40.9 57 60 52 147 62 70 57 151118A+119A 51.0 61.3 67 80 76 147 72 80 80 151
HIGH
NONE − − 25 30 26 161 29 35 31 165118A 17.0 20.4 34 35 31 161 38 40 35 165119A 34.0 40.9 59 60 54 161 64 70 59 165
118A+119A 51.0 61.3 70 80 78 161 74 80 82 165
Specifications subject to change without notice.122 513 21 3607 00
ELECTRICAL INFORMATIONTable 29 − UNIT WIRE/FUSE OR HACR BREAKER SIZING DATA WITH 2 SPEED INDOOR FAN MOTOR (cont.)
(Units Produced On or Prior to 02/15/2015)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00 Nom(kW)
FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCA
MAXFUSE orHACRBRKR
DISC. SIZEMCA
MAXFUSE orHACRBRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S150
208/2
30-
3-
60
STD
NONE − − 62/61 80/80 65/64 357 66/65 80/80 69/68 361
117A 7.8/10.4 21.7/25.0 62/61 80/80 65/64 357/357 66/65 80/80 69/68 361/361110A 12.0/16.0 33.4/38.5 62/61 80/80 65/64 357/357 66/65 80/80 69/68 361/361
112A 24.0/32.0 66.7/77.0 95/106 100/110 87/98 357/357 99/111 100/125 91/102 361/361112A+117A 31.8/42.4 88.4/102.0 122/138 125/150 112/126 357/357 126/142 150/150 116/131 361/361112A+110A 37.6/50.0 104.2/120.3 141/131 150/150 130/147 357/357 146/135 150/150 134/152 361/361
MED
NONE − − 64/63 80/80 67/66 381 68/67 80/80 72/70 385
117A 7.8/10.4 21.7/25.0 64/63 80/80 67/66 381/381 68/67 80/80 72/70 385/385
110A 12.0/16.0 33.4/38.5 64/63 80/80 67/66 381/381 68/67 80/80 72/70 385/385112A 24.0/32.0 66.7/77.0 97/109 100/110 89/100 381/381 102/114 110/125 93/104 385/385
112A+117A 31.8/42.4 88.4/102.0 124/140 125/150 114/129 381/381 129/145 150/150 118/133 385/385
112A+110A 37.6/50.0 104.2/120.3 144/133 150/150 132/150 381/381 149/138 150/150 137/154 385/385
HIGH
NONE − − 67/66 80/80 70/69 392 71/70 80/80 75/74 396
117A 7.8/10.4 21.7/25.0 67/66 80/80 70/69 392/392 71/70 80/80 75/74 396/396
110A 12.0/16.0 33.4/38.5 67/66 80/80 70/69 392/392 71/70 80/80 75/74 396/396112A 24.0/32.0 66.7/77.0 101/113 110/125 92/103 392/392 106/117 110/125 97/108 396/396
112A+117A 31.8/42.4 88.4/102.0 128/144 150/150 117/132 392/392 133/149 150/150 122/136 396/396112A+110A 37.6/50.0 104.2/120.3 148/137 150/150 135/153 392/392 152/141 175/175 140/157 396/396
460-
3-
60
STD
NONE − − 30 40 31 180 32 40 33 182
116A 13.9 16.7 30 40 31 180 32 40 33 182113A 16.5 19.8 30 40 31 180 32 40 33 182
115A 33.0 39.7 55 60 50 180 57 60 52 182114A+116A 41.7 50.2 68 70 62 180 70 70 64 182115A+113A 50.0 60.1 65 70 73 180 68 80 76 182
MED
NONE − − 31 40 33 192 33 40 35 194
116A 13.9 16.7 31 40 33 192 33 40 35 194
113A 16.5 19.8 31 40 33 192 34 40 35 194115A 33.0 39.7 56 60 51 192 58 60 53 194
114A+116A 41.7 50.2 69 70 63 192 72 80 65 194
115A+113A 50.0 60.1 67 80 75 192 69 80 77 194
HIGH
NONE − − 33 40 34 197 35 40 36 199
116A 13.9 16.7 33 40 34 197 35 40 36 199
113A 16.5 19.8 33 40 34 197 35 40 36 199115A 33.0 39.7 58 60 53 197 60 60 55 199
114A+116A 41.7 50.2 71 80 65 197 73 80 67 199115A+113A 50.0 60.1 69 80 76 197 71 80 79 199
575-
3-
60
STD
NONE − − 24 30 25 142 28 30 30 146
118A 17.0 20.4 32 35 29 142 36 40 33 146119A 34.0 40.9 57 60 52 142 62 70 57 146
118A+119A 51.0 61.3 67 80 76 142 72 80 80 146
MED
NONE − − 24 30 25 142 28 30 30 146
118A 17.0 20.4 32 35 29 142 36 40 33 146
119A 34.0 40.9 57 60 52 142 62 70 57 146118A+119A 51.0 61.3 67 80 76 142 72 80 80 146
HIGH
NONE − − 26 30 27 156 30 35 32 160
118A 17.0 20.4 34 35 31 156 38 40 35 160119A
118A+119A34.051.0
40.961.3
5970
6080
5478
156156
6474
7080
5982
160160
Specifications subject to change without notice. 123513 21 3607 00
ELECTRICAL INFORMATION
Table 29 − UNIT WIRE/FUSE OR HACR BREAKER SIZING DATA WITH 2 SPEED INDOOR FAN MOTOR (cont.)U
NIT
NO
M.
V-
Ph
-H
Z
IFMTYPE
ELEC. HTR NO C.O. or UNPWR C.O.
CRHEATER***A00Nom(kW) FLA
NO P.E. w/ P.E. (pwrd fr/unit)
MCAMAX FUSE
or HACRBRKR
DISC. SIZEMCA
MAX FUSEor HACR
BRKR
DISC. SIZE
FLA LRA FLA LRA
RA
S180
208/2
30-
3-
60
STD
NONE − − 70/69 80/80 73/72 393 74/73 80/80 77/76 397291A 12.4/16.5 34.4/39.7 70/69 80/80 73/72 393/393 74/73 80/80 77/76 397/397
294A 25.2/33.5 69.9/80.6 99/111 100/125 90/102 393/393 103/116 110/125 95/106 397/397288A+294A 32.7/43.5 90.7/104.7 125/141 125/150 114/129 393/393 129/146 150/150 119/134 397/397
291A+294A 37.6/50.0 104.3/120.3 142/131 150/150 130/147 393/393 146/135 150/150 134/152 397/397294A+294A 50.3/67.0 139.7/161.2 151/171 175/200 171/194 393/393 156/176 175/200 175/199 397/397
MED
NONE − − 72/71 80/80 75/74 417 76/75 100/90 79/78 421
291A 12.4/16.5 34.4/39.7 72/71 80/80 75/74 417/417 76/75 100/90 79/78 421/421294A 25.2/33.5 69.9/80.6 101/113 110/125 93/104 417/417 106/118 110/125 97/108 421/421
288A+294A 32.7/43.5 90.7/104.7 127/144 150/150 117/132 417/417 132/148 150/150 121/136 421/421291A+294A 37.6/50.0 104.3/120.3 144/133 150/150 132/150 417/417 149/138 150/150 137/154 421/421294A+294A 50.3/67.0 139.7/161.2 154/174 175/200 173/197 417/417 158/179 175/200 177/201 421/421
HIGH
NONE − − 82 100 86 432 85 100 91 436291A 12.4/16.5 34.4/39.7 82/82 100/100 86/86 432/432 85/85 100/100 91/91 436/436
294A 25.2/33.5 69.9/80.6 113/127 125/150 104/116 432/432 118/131 125/150 108/121 436/436288A+294A 32.7/43.5 90.7/104.7 139/157 150/175 128/144 432/432 144/162 150/175 132/148 436/436291A+294A 37.6/50.0 104.3/120.3 156/146 175/175 143/162 432/432 161/151 175/175 148/166 436/436
294A+294A 50.3/67.0 139.7/161.2 166/187 175/225 184/209 432/432 170/192 175/225 188/213 436/436
460-
3-
60
STD
NONE − − 35 45 36 233 37 45 38 235
292A 16.5 19.9 35 45 36 233 37 45 38 235295A 33.5 40.3 56 60 51 233 58 60 53 235
289A+295A 43.5 52.3 71 80 65 233 73 80 67 235
292A+295A 50.0 60.2 65 70 74 233 68 80 76 235295A+295A 67.0 80.6 86 90 97 233 88 100 99 235
MED
NONE − − 36 45 37 245 38 50 39 247292A 16.5 19.9 36 45 37 245 38 50 39 247295A 33.5 40.3 57 60 52 245 59 60 54 247
289A+295A 43.5 52.3 72 80 66 245 74 80 68 247292A+295A 50.0 60.2 67 80 75 245 69 80 77 247
295A+295A 67.0 80.6 87 100 98 245 89 100 100 247
HIGH
NONE − − 41 50 43 252 43 50 45 254292A 16.5 19.9 41 50 43 252 43 50 45 254
295A 33.5 40.3 64 70 58 252 66 70 60 254289A+295A 43.5 52.3 79 80 72 252 81 90 74 254
292A+295A 50.0 60.2 73 80 81 252 76 80 83 254295A+295A 67.0 80.6 94 100 104 252 96 100 106 254
575-
3-
60
STD
NONE − − 29 35 30 184 32 40 34 188
293A 16.5 15.9 29 35 30 184 32 40 34 188296A 33.5 32.2 46 50 42 184 51 60 47 188
290A+296A 43.5 41.8 58 60 53 184 63 70 58 188293A+296A 50.0 48.1 54 60 60 184 59 60 65 188296A+296A 67.0 64.4 70 80 79 184 75 80 84 188
MED
NONE − − 29 35 30 184 32 40 34 188293A 16.5 15.9 29 35 30 184 32 40 34 188
296A 33.5 32.2 46 50 42 184 51 60 47 188290A+296A 43.5 41.8 58 60 53 184 63 70 58 188293A+296A 50.0 48.1 54 60 60 184 59 60 65 188
296A+296A 67.0 64.4 70 80 79 184 75 80 84 188
HIGH
NONE − − 33 40 35 196 37 45 39 200
293A 16.5 15.9 33 40 35 196 37 45 39 200296A 33.5 32.2 52 60 47 196 57 60 52 200
290A+296A 43.5 41.8 64 70 58 196 69 70 63 200
293A+296A 50.0 48.1 60 70 66 196 65 70 70 200
296A+296A 67.0 64.4 76 80 84 196 81 90 89 200
LEGEND:BRKR − Circuit breakerCO − − Convenience outletDISC − DisconnectFLA− − Full load ampsIFM− − Indoor fan motorLRA − Locked rotor ampsMCA − Minimum circuit ampsMOCP − MAX FUSE or HACR BreakerPE − Power exhaustUNPWR CO − Unpowered convenient outletNOTES:
1. In compliance with NEC requirements for multimotor and combination load equipand 440), the overcurrent protective device for the unit shall be fuse or HACR bfuse or circuit breaker.
2. Unbalanced 3-Phase Supply VoltageNever operate a motor where a phase imbalance in supply voltage is greater thato determine the percentage of voltage imbalance.
% Voltage Imbalance = 100 x
max voltage deviation from average voltage
average voltage
Example: Supply voltage is 230-3-60
AB = 224 vBC = 231 vAC = 226 v
Average Voltage =(224 + 231 + 226)
=681
3 3
= 227
Determine maximum deviation from average voltage.(AB) 227 – 224 = 3 v(BC) 231 – 227 = 4 v(AC) 227 – 226 = 1 vMaximum deviation is 4 v.Determine percent of voltage imbalance.
% Voltage Imbalance = 100 x4
227
= 1.76%
This amount of phase imbalance is satisfactory as it is below the maximum allowable 2%.IMPORTANT: If the supply voltage phase imbalance is more than 2%, contact your localelectric utility company immediately.
Specifications subject to change without notice.124 513 21 3607 00
SEQUENCE OF OPERATIONGeneralThe sequence below describes the sequence ofoperation for an electromechanical unit with andwithout a factory installed EconoMi$er� IV and X(called “economizer” in this sequence). For informationregarding a direct digital controller, see the start−up,operations, and troubleshooting manual for theapplicable controller.Electromechanical units with no economizerCooling (Single speed indoor fan motor) —When the thermostat calls for cooling, terminals G andY1 are energized. As a result, the indoor fan contactor(IFC) and the compressor contactor (C1) areenergized, causing the indoor fan motor (IFM),compressor #1, and outdoor fan to start. If the unit has2 stages of cooling, the thermostat will additionallyenergize Y2. The Y2 signal will energize compressorcontactor #2 (C2), causing compressor #2 to start.Regardless of the number of stages, the outdoor fanmotor runs continuously while unit is cooling.Cooling (2−speed indoor fan motor) —Per ASHRAE 90.1 standard section 6.4.3.10.b, duringthe first stage of cooling operation the VFD will adjustthe fan motor to provide 2/3rd of the total cfmestablished for the unit. When a call for the secondstage of cooling is required, the VFD will allow the totalcfm for the unit established (100%).HeatingNOTE: The RAS is sold as cooling only. If electricheaters are required, use only factory−approvedelectric heaters. They will operate as described below.Units have either 1 or 2 stages of electric heat. Whenthe thermostat calls for heating, power is applied tothe W1 terminal at the unit. The unit control willenergize the indoor fan contactor and the first stage ofelectric heat. On units with 2−stage heating, whenadditional heating is required, the second stage ofelectric heat (if equipped) will be energized whenpower is applied at the W2 terminal on the unit.Electromechanical units with an economizerCooling —When free cooling is not available, the compressorswill be controlled by the zone thermostat. When freecooling is available, the outdoor air damper ismodulated by the EconoMi$er IV and X control toprovide a 50�F (10�C) to 55�F (13�C) mixed airtemperature into the zone. As the mixed airtemperature fluctuates above 55�F (13�C) or below50�F (10�C) dampers will be modulated (open orclose) to bring the mixed air temperature back withincontrol. If mechanical cooling is utilized with freecooling, the outdoor air damper will maintain its currentposition at the time the compressor is started. If theincrease in cooling capacity causes the mixed airtemperature to drop below 45�F (9�C), then theoutdoor air damper position will be decreased to theminimum position. If the mixed air temperaturecontinues to fall, the outdoor air damper will close.Control returns to normal once the mixed air
temperature rises above 48�F (9�C). The powerexhaust fans will be energized and de−energized, ifinstalled, as the outdoor air damper opens and closes.
If field−installed accessory CO2 sensors areconnected to the EconoMi$er IV and X control, ademand controlled ventilation strategy will begin tooperate. As the CO2 level in the zone increases abovethe CO2 setpoint, the minimum position of the damperwill be increased proportionally. As the CO2 leveldecreases because of the increase in fresh air, theoutdoor air damper will be proportionally closed. ForEconoMi$er IV and X operation, there must be athermostat call for the fan (G). If the unit is occupiedand the fan is on, the damper will operate at minimumposition. Otherwise, the damper will be closed.
When the EconoMi$er IV and X control is in theoccupied mode and a call for cooling exists (Y1 on thethermostat), the control will first check for indoor fanoperation. If the fan is not on, then cooling will not beactivated. If the fan is on, then the control will open theEconoMi$er IV and X damper to the minimumposition.
On the initial power to the EconoMi$er IV and Xcontrol, it will take the damper up to 2 1/2 minutesbefore it begins to position itself. After the initialpower−up, further changes in damper position cantake up to 30 seconds to initiate. Damper movementfrom full closed to full open (or vice versa) will takebetween 1 1/2 and 2 1/2 minutes. If free cooling canbe used as determined from the appropriatechangeover command (switch, dry bulb, enthalpycurve, differential dry bulb, or differential enthalpy),then the control will modulate the dampers open tomaintain the mixed air temperature setpoint at 50�F(10�C) to 55�F (13�C). If there is a further demand forcooling (cooling second stage − Y2 is energized), thenthe control will bring on compressor stage 1 tomaintain the mixed air temperature setpoint. TheEconoMi$er IV and X damper will be open atmaximum position. EconoMi$er IV and X operation islimited to a single compressor.
2−Speed Note: When operating in ventilation modeonly, the indoor fan motor will automatically adjust to2/3rd of the total cfm established.
Heating
The sequence of operation for the heating is the sameas an electromechanical unit with no economizer. Theonly difference is how the economizer acts. Theeconomizer will stay at the Economizer MinimumPosition while the evaporator fan is operating. Theoutdoor air damper is closed when the indoor fan isnot operating.
Specifications subject to change without notice. 125513 21 3607 00
SEQUENCE OF OPERATION (cont.)
Optional Hot Gas Re−Heat DehumidificationSystem
Units with the factory equipped Hot Gas Re−Heatoption are capable of providing multiple modes ofimproved dehumidification as a variation of the normalcooling cycle. The Hot Gas Re−Heat option includesadditional valves in the liquid line and discharge line ofeach refrigerant circuit, a small reheat condenser coildownstream of the evaporator, and Motormastervariable−speed control of some or all outdoor fans.Operation of the revised refrigerant circuit for eachmode is described below.
The Hot Gas Re−Heat system provides threesub−modes of operation: Cool, Reheat1, and Reheat2.
Cool mode − provides a normal ratio of Sensible andLatent Cooling effect from the evaporator coil.
Reheat1 − provides increased Latent Cooling whileslightly reducing the Sensible Cooling effect.
Reheat2 − provides normal Latent Cooling but withnull or minimum Sensible Cooling effect delivered tothe space.
The Reheat1 and Reheat2 modes are available whenthe unit is not in a Heating mode and when the LowAmbient Lockout switch is closed.
The following diagrams depict piping for Single Stagecooling units.
Specifications subject to change without notice.126 513 21 3607 00
SEQUENCE OF OPERATION (cont.)
CONDENSER COILH
EVAPORATOR COIL
COMPRESSOR
OUTDOOR AIR
INDOOR LEAVING AIR
INDOOR ENTERING AIR
DSVxVALVE
CSVxVALVE
ACUTROLMETERING
DEVICE
REHEAT MODEMETERING
DEVICE (TXV)
= CLOSED VALVE
= OPEN VALVE
C12647B
Normal Cooling Mode − Hot Gas Re−Heat System with Single Stage Cooling
CONDENSER COILH
EVAPORATOR COIL
COMPRESSOR
OUTDOOR AIR
INDOOR LEAVING AIR
INDOOR ENTERING AIR
DSVxVALVE
CSVxVALVE
ACUTROLMETERING
DEVICE
REHEAT MODEMETERING
DEVICE (TXV)
= CLOSED VALVE= OPEN VALVE
C12648B
Subcooling Mode (Reheat 1) − Hot Gas Re−Heat System with Single Stage Cooling
H
COMPRESSOR
OUTDOOR AIR
INDOOR LEAVING AIR
INDOOR ENTERING AIR
DSVxVALVE
CSVxVALVE
ACUTROLMETERING
DEVICE
REHEAT MODEMETERING
DEVICE (TXV)
= CLOSED VALVE= OPEN VALVE
EVAPORATOR COIL
CONDENSER COIL
C12649B
Hot Gas Reheat Mode (Reheat 2) − Hot Gas Re−Heat System with Single Stage Cooling
Specifications subject to change without notice. 127513 21 3607 00
GUIDE SPECIFICATIONS − RAS036−180
Cooling Only/Electric Heat Packaged RooftopHVAC Guide SpecificationsSize Range: 3 to 15 Nominal TonsSection Description23 06 80 Schedules for Decentralized HVAC Equipment
23 06 80.13 Decentralized Unitary HVAC Equipment Schedule23 06 80.13.A. Rooftop unit schedule
1. Schedule is per the project specification requirements.23 07 16 HVAC Equipment Insulation
23 07 16.13 Decentralized, Rooftop Units:23 07 16.13.A. Evaporator fan compartment:
1. Interior cabinet surfaces shall be insulated with a minimum 1/2−in. thick, minimum 1 1/2 lb density, flexiblefiberglass insulation bonded with a phenolic binder, neoprene coated on the air side.
2. Insulation and adhesive shall meet NFPA 90A requirements for flame spread and smoke generation.23 07 16.13.B. Electric heat compartment:
1. Aluminum foil−faced fiberglass insulation shall be used.2. Insulation and adhesive shall meet NFPA 90A requirements for flame spread and smoke generation.
23 09 13 Instrumentation and Control Devices for HVAC23 09 13.23 Sensors and Transmitters23 09 13.23.A. Thermostats
1. Thermostat musta. energize both “W” and “G” when calling for heat.b. have capability to energize 2 different stages of cooling, and 2 different stages of heating.c. include capability for occupancy scheduling.
23 09 33 Electric and Electronic Control System for HVAC23 09 33.13 Decentralized, Rooftop Units:23 09 33.13.A. General:
1. Shall be complete with self−contained low−voltage control circuit protected by a resettable circuit breakeron the 24−v transformer side. Transformer shall have 75VA capability.
2. Shall utilize color−coded wiring.3. Shall include a central control terminal board to conveniently and safely provide connection points for vital
control functions such as: smoke detectors, phase monitor, economizer, thermostat, DDC control options,and low and high pressure switches.
4. Unit shall include a minimum of one 8−pin screw terminal connection board for connection of control wir-ing.
23 09 33.23.B. Safeties:1. Compressor over−temperature, over current.2. Low pressure switch.
a. Units with 2 compressors shall have different sized connectors for the circuit 1 and circuit 2 low andhigh pressure switches. They shall physically prevent the cross−wiring of the safety switches betweencircuits 1 and 2.
b. Low pressure switch shall use different color wire than the high pressure switch. The purpose is toassist the installer and service technician to correctly wire and or troubleshoot the rooftop unit.
3. High pressure switch.a. Units with 2 compressors shall have different sized connectors for the circuit 1 and circuit 2 low and
high pressure switches. They shall physically prevent the cross−wiring of the safety switches betweencircuits 1 and 2.
b. High pressure switch shall use different color wire than the low pressure switch. The purpose is toassist the installer and service technician to correctly wire and or troubleshoot the rooftop unit.
4. Automatic reset, motor thermal overload protector.23 09 93 Sequence of Operations for HVAC Controls
23 09 93.13 Decentralized, Rooftop Units:23 09 93.13 INSERT SEQUENCE OF OPERATION
23 40 13 Panel Air Filters23 40 13.13 Decentralized, Rooftop Units:23 40 13.13.A. Standard filter section
Specifications subject to change without notice.128 513 21 3607 00
1. Shall consist of factory−installed, low velocity, throwaway 2−in. thick fiberglass filters of commerciallyavailable sizes.
2. Unit shall use only one filter size. Multiple sizes are not acceptable.3. Filters shall be accessible through an access panel with “no−tool” removal as described in the unit cabinet
section of this specification (23 81 19.13.H).23 81 19 Self−Contained Air Conditioners
23 81 19.13 Small−Capacity Self−Contained Air Conditioners (RAS036−180)23 81 19.13.A. General
1. Outdoor, rooftop mounted, electrically controlled, heating and cooling unit utilizing a(n) hermetic scrollcompressor(s) for cooling duty and gas combustion for heating duty.
2. Factory assembled, single−piece heating and cooling rooftop unit. Contained within the unit enclosureshall be all factory wiring, piping, controls, and special features required prior to field start−up.
3. Unit shall use environmentally safe, R−410A refrigerant.4. Unit shall be installed in accordance with the manufacturer’s instructions.5. Unit must be selected and installed in compliance with local, state, and federal codes.
23 81 19.13.B. Quality Assurance1. Unit meets ASHRAE 90.1 minimum efficiency requirements.2. Unit shall be rated in accordance with AHRI Standards 210/240 and 340/360.3. Unit shall be designed to conform to ASHRAE 15.4. Unit shall be UL−tested and certified in accordance with ANSI Z21.47 Standards and UL−listed and certi-
fied under Canadian standards as a total package for safety requirements.5. Insulation and adhesive shall meet NFPA 90A requirements for flame spread and smoke generation.6. Unit casing shall be capable of withstanding 500−hour salt spray exposure per ASTM B117 (scribed speci-
men).7. Unit shall be designed in accordance with ISO 9001:2000, and shall be manufactured in a facility re-
gistered by ISO 9001:2000.8. Roof curb shall be designed to conform to NRCA Standards.9. Unit shall be subjected to a completely automated run test on the assembly line. The data for each unit
will be stored at the factory, and must be available upon request.10. Unit shall be designed in accordance with UL Standard 1995, including tested to withstand rain.11. Unit shall be constructed to prevent intrusion of snow and tested to prevent snow intrusion into the control
box up to 40 mph.12. Unit shake tested to assurance level 1, ASTM D4169 to ensure shipping reliability.13. High Efficient Motors listed shall meet section 313 of the Energy Independence and Security Act of 2007
(EISA 2007).23 81 19.13.C. Delivery, Storage, and Handling
1. Unit shall be stored and handled per manufacturer’s recommendations.2. Lifted by crane requires either shipping top panel or spreader bars.3. Unit shall only be stored or positioned in the upright position.
23 81 19.13.D. Project Conditions1. As specified in the contract.
23 81 19.13.E. Project Conditions1. As specified in the contract.
23 81 19.13.F. Operating Characteristics1. Unit shall be capable of starting and running at 115�F (46�C) ambient outdoor temperature, meeting max-
imum load criteria of AHRI Standard 210/240 or 340/360 at 10% voltage.2. Compressor with standard controls shall be capable of operation down to 40�F (4�C), ambient outdoor
temperatures. Accessory winter start kit is necessary if mechanically cooling at ambient temperaturesdown to 25�F (−4�C).
3. Unit shall discharge supply air vertically or horizontally as shown on contract drawings.4. Unit shall be factory configured for vertical supply & return configurations.5. Unit shall be field convertible from vertical to horizontal airflow on all models. No special kit required on
04−14 models. Supply duct kit required for 16 size model only.6. Unit shall be capable of mixed operation: vertical supply with horizontal return or horizontal supply with
vertical return.23 81 19.13.G. Electrical Requirements
1. Main power supply voltage, phase, and frequency must match those required by the manufacturer.23 81 19.13.H. Unit Cabinet
1. Unit cabinet shall be constructed of galvanized steel, and shall be bonderized and coated with a pre−painted baked enamel finish on all externally exposed surfaces.
Specifications subject to change without notice. 129513 21 3607 00
2. Unit cabinet exterior paint shall be: film thickness, (dry) 0.003 inches minimum, gloss (per ASTM D523,60�F): 60, Hardness: H−2H Pencil hardness.
3. Evaporator fan compartment interior cabinet insulation shall conform to AHRI Standards 210/240 or340/360 minimum exterior sweat criteria. Interior surfaces shall be insulated with a minimum 1/2−in. thick,1 lb density, flexible fiberglass insulation, neoprene coated on the air side. Aluminum foil−faced fiberglassinsulation shall be used in the heat compartment.
4. Base of unit shall have a minimum of four locations for thru−the−base gas and electrical connections(factory installed or field installed), standard.
5. Base Raila. Unit shall have base rails on a minimum of 2 sides.b. Holes shall be provided in the base rails for rigging shackles to facilitate maneuvering and overhead
rigging.c. Holes shall be provided in the base rail for moving the rooftop by fork truck.d. Base rail shall be a minimum of 16 gauge thickness.
6. Condensate pan and connections:a. Shall be a sloped condensate drain pan made of a non−corrosive material.b. Shall comply with ASHRAE Standard 62.c. Shall use a 3/4” −14 NPT drain connection, possible either through the bottom or end of the drain
pan. Connection shall be made per manufacturer’s recommendations.7. Top panel:
a. Shall be a single piece top panel on 04 thru 12 sizes, two piece on 14 and 16 size.8. Electrical Connections
a. All unit power wiring shall enter unit cabinet at a single, factory−prepared, knockout location.b. Thru−the−base capability
(1.) Standard unit shall have a thru−the−base electrical location(s) using a raised, embossed portionof the unit basepan.
(2.) Optional, factory−approved, water−tight connection method must be used for thru−the−baseelectrical connections.
(3.) No basepan penetration, other than those authorized by the manufacturer, is permitted.9. Component access panels (standard)
a. Cabinet panels shall be easily removable for servicing.b. Unit shall have one factory installed, tool−less, removable, filter access panel.c. Panels covering control box, indoor fan, indoor fan motor, gas components (where applicable), and
compressors shall have molded composite handles.d. Handles shall be UV modified, composite. permanently attached, and recessed into the panel.e. Screws on the vertical portion of all removable access panel shall engage into heat resistant, molded
composite collars.f. Collars shall be removable and easily replaceable using manufacturer recommended parts.
23 81 19.13.I. N/A23 81 19.13.J. Coils
1. Standard Aluminum fin − Copper Tube Coils:a. Standard evaporator and condenser coils shall have aluminum lanced plate fins mechanically bonded
to seamless internally grooved copper tubes with all joints brazed.b. Evaporator coils shall be leak tested to 150 psig, pressure tested to 450 psig, and qualified to UL
1995 burst test at 1775 psig.c. Condenser coils shall be leak tested to 150 psig, pressure tested to 650 psig, and qualified to UL
1995 burst test at 1980 psig.2. Optional Pre−coated aluminum−fin condenser coils (3 Phase Models Only):
a. Shall have a durable epoxy−phenolic coating to provide protection in mildly corrosive coastal environ-ments.
b. Coating shall be applied to the aluminum fin stock prior to the fin stamping process to create an inertbarrier between the aluminum fin and copper tube.
c. Epoxy−phenolic barrier shall minimize galvanic action between dissimilar metals.3. Optional Copper−fin evaporator and condenser coils (3 Phase Models Only):
a. Shall be constructed of copper fins mechanically bonded to copper tubes and copper tube sheets.b. Galvanized steel tube sheets shall not be acceptable.c. A polymer strip shall prevent coil assembly from contacting the sheet metal coil pan to minimize po-
tential for galvanic corrosion between coil and pan.4. Optional E−coated aluminum−fin evaporator and condenser coils (3 Phase Models Only):
Specifications subject to change without notice.130 513 21 3607 00
a. Shall have a flexible epoxy polymer coating uniformly applied to all coil surface areas without materialbridging between fins.
b. Coating process shall ensure complete coil encapsulation of tubes, fins and headers.c. Color shall be high gloss black with gloss per ASTM D523−89.d. Uniform dry film thickness from 0.8 to 1.2 mil on all surface areas including fin edges.e. Superior hardness characteristics of 2H per ASTM D3363−92A and cross−hatch adhesion of 4B−5B
per ASTM D3359−93.f. Impact resistance shall be up to 160 in.−lb (ASTM D2794−93).g. Humidity and water immersion resistance shall be up to minimum 1000 and 250 hours respectively
(ASTM D2247−92 and ASTM D870−92).h. Corrosion durability shall be confirmed through testing to be no less than 1000 hours salt spray per
ASTM B117−90.5. Optional E−coated aluminum−fin, aluminum tube condenser coils:
a. Shall have a flexible epoxy polymer coating uniformly applied to all coil external surface areas withoutmaterial bridging between fins or louvers.
b. Coating process shall ensure complete coil encapsulation, including all exposed fin edges.c. E−coat thickness of 0.8 to 1.2 mil with top coat having a uniform dry film thickness from 1.0 to 2.0
mil on all external coil surface areas, including fin edges, shall be provided.d. Shall have superior hardness characteristics of 2H per ASTM D3363−00 and cross−hatch adhesion
of 4B−5B per ASTM D3359−02.e. Shall have superior impact resistance with no cracking, chipping or peeling per NSF/ANSI 51−2002
Method 10.2.23 81 19.13.K. Refrigerant Components
1. Refrigerant circuit shall include the following control, safety, and maintenance features:a. Fixed orifice metering system shall prevent mal−distribution of two−phase refrigerant by including
multiple fixed orifice devices in each refrigeration circuit. Each orifice is to be optimized to the coilcircuit it serves.
b. Refrigerant filter drier.c. Service gauge connections on suction and discharge lines.d. Pressure gauge access through a specially designed access port in the top panel of the unit.
2. There shall be gauge line access port in the skin of the rooftop, covered by a black, removable plug.a. The plug shall be easy to remove and replace.b. When the plug is removed, the gauge access port shall enable maintenance personnel to route their
pressure gauge lines.c. This gauge access port shall facilitate correct and accurate condenser pressure readings by enabling
the reading with the compressor access panel on.d. The plug shall be made of a leak proof, UV−resistant, composite material.
3. Compressorsa. Unit shall use one fully hermetic, scroll compressor for each independent refrigeration circuit.b. Compressor motors shall be cooled by refrigerant gas passing through motor windings.c. Compressors shall be internally protected from high discharge temperature conditions.d. Compressors shall be protected from an over−temperature and over−amperage conditions by an in-
ternal, motor overload device.e. Compressor shall be factory mounted on rubber grommets.f. Compressor motors shall have internal line break thermal, current overload and high pressure differ-
ential protection.g. Crankcase heaters shall not be required for normal operating range, unless provided by compressor
manufacturer due to refrigerant charge limits.23 81 19.13.L. Filter Section
1. Filters access is specified in the unit cabinet section of this specification.2. Filters shall be held in place by a pivoting filter tray, facilitating easy removal and installation.3. Shall consist of factory−installed, low velocity, throw−away 2−in. thick fiberglass filters.4. Filters shall be standard, commercially available sizes.5. Only one size filter per unit is allowed.
23 81 19.13.M. Evaporator Fan and Motor1. Evaporator fan motor:
a. Shall have permanently lubricated bearings.b. Shall have inherent automatic−reset thermal overload protection or circuit breaker.c. Shall have a maximum continuous bhp rating for continuous duty operation; no safety factors above
that rating shall be required.
Specifications subject to change without notice. 131513 21 3607 00
2. Belt−driven Evaporator Fan:a. Belt drive shall include an adjustable pitch motor pulley.b. Shall use sealed, permanently lubricated ball−bearing type.c. Blower fan shall be double−inlet type with forward−curved blades.d. Shall be constructed from steel with a corrosion resistant finish and dynamically balanced.
23 81 19.13.N. Condenser Fans and Motors1. Condenser fan motors:
a. Shall be a totally enclosed motor.b. Shall use permanently lubricated bearings.c. Shall have inherent thermal overload protection with an automatic reset feature.d. Shall use a shaft−down design on 04 to 12 and 16 size models and shaft−up design on 14 size with
rain shield.2. Condenser Fans:
a. Shall be a direct−driven propeller type fan.b. Shall have galvalum blades riveted to corrosion−resistant steel spiders and shall be dynamically bal-
anced.23 81 19.13.O. Special Features, Options and Accessories
1. 2−Speed Indoor Fan Motor System for 2−stage cooling models only.a. Evaporator fan motor:
(1.) Shall have permanently lubricated bearings.(2.) Shall have a maximum continuous bhp rating for continuous duty operation; no safety factors
above that rating.(3.) Shall be Variable Frequency duty and 2−speed control.(4.) Shall contain motor shaft grounding ring to prevent electrical bearing fluting damage by safely
diverting harmful shaft voltages and bearing currents to ground.2. Variable Frequency Drive (VFD). Only available on 2−speed indoor fan motor option:
a. Shall be installed inside the unit cabinet, mounted, wired and tested.b. Shall contain Electromagnetic Interference (EMI) frequency protection.c. Insulated Gate Bi−Polar Transistors (IGBT) used to produce the output pulse width modulated
(PWM) waveform, allowing for quiet motor operation.d. Self diagnostics with fault and power code LED indicator. Field accessory Display Kit available for
further diagnostics and special setup applications.e. RS485 capability standard.f. Electronic thermal overload protection.g. 5% swinging chokes for harmonic reduction and improved power factor.h. All printed circuit boards shall be conformal coated.
3. Integrated EconoMi$er IV, EconoMi$er2, and EconoMi$er X standard leak rate models. (Factory in-stalled on 3 phase models only. Field installed on all 3 and 1 phase models)a. Integrated, gear driven opposing modulating blade design type capable of simultaneous economizer
and compressor operation.b. Independent modules for vertical or horizontal return configuration shall be available. Vertical return
modules shall be available as a factory installed option.c. Damper blades shall be galvanized steel with composite gears. Plastic or composite blades on intake
or return shall not be acceptable.d. Shall include all hardware and controls to provide free cooling with outdoor air when temperature
and/or humidity are below setpoints.e. Shall be equipped with gear driven dampers for both the outdoor ventilation air and the return air for
positive air stream control.f. Standard leak rate shall be equipped with dampers not to exceed 2% leakage at 1 in. wg pressure
differential.g. Economizer controller on EconoMi$er IV models shall be Honeywell W7212 that provides:
(1.) Combined minimum and DCV maximum damper position potentiometers with compressor sta-ging relay.
(2.) Functions with solid state analog enthalpy or dry bulb changeover control sensing.(3.) Contain LED indicates for:
when free cooling is available, when module is in DCV mode, when exhaust fan contact isclosed.
h. Economizer controller on EconoMi$er X models shall be the Honeywell W7220 that provides:(1.) 2−line LCD interface screen for setup, configuration and troubleshooting.
Specifications subject to change without notice.132 513 21 3607 00
(2.) On−board Fault Detection and Diagnostics (FDD) that senses and alerts when the economizer isnot operating properly, per California Title 24.
(3.) Sensor failure loss of communication identification(4.) Automatic sensor detection(5.) Capabilities for use with multiple−speed indoor fan systems(6.) Utilize digital sensors: Dry bulb and Enthalpy
i. Economizer controller on EconoMi$er 2 models with PremierLink shall be 4−20mA design and con-trolled by the PremierLink controller. PremierLink does not comply with California Title 24 Fault De-tection& Diagnostic (FDD) requirements.
j. Economizer controller on EconoMi$er 2 models with RTU Open models shall be a 4−20mA designcontrolled directly by the RTU Open controller. RTU Open meets California Title 24 Fault Detection &Diagnostic (FDD) requirements.
k. Shall be capable of introducing up to 100% outdoor air.l. Shall be equipped with a barometric relief damper capable of relieving up to 100% return air and con-
tain seals that meet ASHRAE 90.1 requirements.m. Shall be designed to close damper(s) during loss−of−power situations with spring return built into mo-
tor.n. Dry bulb outdoor air temperature sensor shall be provided as standard. Enthalpy sensor is also avail-
able on factory installed only. Outdoor air sensor setpoint shall be adjustable and shall range from 40to 100F /4 to 38C. Additional sensor options shall be available as accessories.
o. The economizer controller shall also provide control of an accessory power exhaust unit function.Factory set at 100%, with a range of 0% to 100%.
p. The economizer shall maintain minimum airflow into the building during occupied period and providedesign ventilation rate for full occupancy.
q. Dampers shall be completely closed when the unit is in the unoccupied mode.r. Economizer controller shall accept a 2−10 Vdc CO2 sensor input for IAQ/DCV control. In this mode,
dampers shall modulate the outdoor air damper to provide ventilation based on the sensor input.s. Compressor lockout temperature on W7220 is adjustable from −45�F to 80�F, set at a factory default
of 32�F. Others shall open at 35�F (2�C) and closes at 50�F (10�C).t. Actuator shall be direct coupled to economizer gear. No linkage arms or control rods shall be accept-
able.u. Economizer controller shall provide indications when in free cooling mode, in the DCV mode, or the
exhaust fan contact is closed.4. Integrated EconoMi$er2, and EconoMi$er X Ultra Low Leak rate models.(Factory installed on 3 phase
models only. Field installed on all 3 and 1 phase models)a. Integrated, gear driven opposing modulating blade design type capable of simultaneous economizer
and compressor operation.b. Independent modules for vertical or horizontal return configuration shall be available. Vertical return
modules shall be available as a factory installed option.c. Damper blades shall be galvanized steel with composite gears. Plastic or composite blades on intake
or return shall not be acceptable.d. Shall include all hardware and controls to provide free cooling with outdoor air when temperature
and/or humidity are below setpoints.e. Shall be equipped with gear driven dampers for both the outdoor ventilation air and the return air for
positive air stream controlf. Ultra Low Leak design meets California Title 24 section 140.4 and ASHRAE 90.1 requirements for 4
cfm per sq.ft. on the outside air dampers and 10 cfm per sq. ft. on the return dampers.g. Economizer controller on EconoMi$er X models shall be the Honeywell W7220 that provides:
(1.) 2−line LCD interface screen for setup, configuration and troubleshooting(2.) On−board Fault Detection and Diagnostics (FDD) that senses and alerts when the economizer is
not operating properly, per California Title 24.(3.) Sensor failure loss of communication identification(4.) Automatic sensor detection(5.) Capabilities for use with multiple−speed indoor fan systems(6.) Utilize digital sensors: Dry bulb and Enthalpy
h. Economizer controller on EconoMi$er 2 models with RTU Open models shall be a 4−20mA designcontrolled directly by the RTU Open controller. RTU Open meets California Title 24 Fault Detection &Diagnostic (FDD) requirements.
i. Shall be capable of introducing up to 100% outdoor air.j. Shall be equipped with a barometric relief damper capable of relieving up to 100% return air and con-
tain seals that meet ASHRAE 90.1 requirements.
Specifications subject to change without notice. 133513 21 3607 00
k. Shall be designed to close damper(s) during loss−of−power situations with spring return built into mo-tor.
l. Dry bulb outdoor air temperature sensor shall be provided as standard. Enthalpy sensor is also avail-able on factory installed only. Outdoor air sensor setpoint shall be adjustable and shall range from 40to 100° F / 4 to 38° C. Additional sensor options shall be available as accessories.
m. The economizer controller shall also provide control of an accessory power exhaust unit function.Factory set at 100%, with a range of 0% to 100%.
n. The economizer shall maintain minimum airflow into the building during occupied period and providedesign ventilation rate for full occupancy.
o. Dampers shall be completely closed when the unit is in the unoccupied mode.p. Economizer controller shall accept a 2−10 Vdc CO2 sensor input for IAQ/DCV control. In this mode,
dampers shall modulate the outdoor air damper to provide ventilation based on the sensor input.q. Compressor lockout temperature on W7220 is adjustable from −45° F to 80° F, set at a factory de-
fault of 32° F. Others shall open at 35°F (2°C) and closes at 50°F (10°C).r. Actuator shall be direct coupled to economizer gear. No linkage arms or control rods shall be accept-
able.s. Economizer controller shall provide indications when in free cooling mode, in the DCV mode, or the
exhaust fan contact is closed.5. Two−Position Damper (Factory installed on 3 Phase Models Only. Field installed on all 3 and 1 Phase
Models)a. Damper shall be a Two−Position Damper. Damper travel shall be from the full closed position to the
field adjustable %−open setpoint.b. Damper shall include adjustable damper travel from 25% to 100% (full open).c. Damper shall include single or dual blade, gear driven dampers and actuator motor.d. Actuator shall be direct coupled to damper gear. No linkage arms or control rods shall be acceptable.e. Damper will admit up to 100% outdoor air for applicable rooftop units.f. Damper shall close upon indoor (evaporator) fan shutoff and/or loss of power.g. The damper actuator shall plug into the rooftop unit’s wiring harness plug. No hard wiring shall be
required.h. Outside air hood shall include aluminum water entrainment filteri. Not available with 2−Speed Indoor Fan Motor models.
6. Manual dampera. Manual damper package shall consist of damper, air inlet screen, and rain hood which can be preset
to admit up to 50% outdoor air for year round ventilation.b. Not available with 2−Speed Indoor Fan Motor models.
7. Hot Gas Re−Heat Dehumidification System (3 Phase Models Only).a. The Hot Gas Re−Heat Dehumidification System shall be factory−installed in single stage RAS03−150
and 2−stage RAS180 models with RTPF (round tube plate fin) condenser coils, and shall providegreater dehumidification of the occupied space by two modes of dehumidification operations besideits normal design cooling mode:(1.) Subcooling mode further subcools the hot liquid refrigerant leaving the condenser coil when both
temperature and humidity in the space are not satisfied.(2.) Hot gas reheat mode shall mix a portion of the hot gas from the discharge of the compressor
with the hot liquid refrigerant leaving the condenser coil to create a two−phase heat transfer inthe system, resulting in a neutral leaving− air temperature when only humidity in the space is notsatisfied.
(3.) Includes Head Pressure Controller.8. Head Pressure Control Package
a. Controller shall control coil head pressure by condenser−fan speed modulation or condenser−fancycling and wind baffles.
b. Shall consist of solid−state control and condenser−coil temperature sensor to maintain condensingtemperature between 90�F (32�C) and 110�F (43�C) at outdoor ambient temperatures down to−20�F (−29�C).
9. Condenser Coil Hail Guard Assembly (Factory installed on 3 Phase Models Only. Field installed on all 3and 1 Phase Models)a. Shall protect against damage from hail.b. Shall be louvered design.
10. Unit−Mounted, Non−Fused Disconnect Switch (Available on units with MOCP’s of 80 amps or less):a. Switch shall be factory−installed, internally mounted.b. National Electric Code (NEC) and UL approved non−fused switch shall provide unit power shutoff.c. Shall be accessible from outside the unit
Specifications subject to change without notice.134 513 21 3607 00
d. Shall provide local shutdown and lockout capability.11. Convenience Outlet
a. Non−Powered convenience outlet.(1.) Outlet shall be powered from a separate 115/120v power source.(2.) A transformer shall not be included.(3.) Outlet shall be factory−installed and internally mounted with easily accessible 115−v female re-
ceptacle.(4.) Outlet shall include 15 amp GFI receptacles with independent fuse protection.(5.) Outlet shall be accessible from outside the unit.(6.) Outlet shall include a field−installed “Wet in Use” cover.
12. Thru−the−Base Connectors:a. Kits shall provide connectors to permit electrical connections to be brought to the unit through the
unit basepan.b. Minimum of four connection locations per unit.
13. Supply Duct Cover (180 size only):a. Required when field converting the factory standard vertical duct supply to horizontal duct supply
configuration. One required per unit.14. Propeller Power Exhaust:
a. Power exhaust shall be used in conjunction with an integrated economizer.b. Independent modules for vertical or horizontal return configurations shall be available.c. Horizontal power exhaust is shall be mounted in return ductwork.d. Power exhaust shall be controlled by economizer controller operation. Exhaust fans shall be ener-
gized when dampers open past the 0−100% adjustable setpoint on the economizer control.15. Roof Curbs (Vertical):
a. Full perimeter roof curb with exhaust capability providing separate air streams for energy recoveryfrom the exhaust air without supply air contamination.
b. Formed galvanized steel with wood nailer strip and shall be capable of supporting entire unit weight.c. Permits installation and securing of ductwork to curb prior to mounting unit on the curb.
16. Thru−the−Bottom Utility Connectors:a. Kit shall provide connectors to permit gas and electrical connections to be brought to the unit through
the basepan.17. Outdoor Air Enthalpy Sensor:
a. The outdoor air enthalpy sensor shall be used to provide single enthalpy control. When used in con-junction with a return air enthalpy sensor, the unit will provide differential enthalpy control. The sensorallows the unit to determine if outside air is suitable for free cooling.
18. Return Air Enthalpy Sensor:a. The return air enthalpy sensor shall be used in conjunction with an outdoor air enthalpy sensor to
provide differential enthalpy control.19. Indoor Air Quality (CO2) Sensor:
a. Shall be able to provide demand ventilation indoor air quality (IAQ) control.b. The IAQ sensor shall be available in duct mount, wall mount, or wall mount with LED display. The
setpoint shall have adjustment capability.20. Smoke detectors (factory−installed only):
a. Shall be a Four−Wire Controller and Detector.b. Shall be environmental compensated with differential sensing for reliable, stable, and drift−free sens-
itivity.c. Shall use magnet−activated test/reset sensor switches.d. Shall have tool−less connection terminal access.e. Shall have a recessed momentary switch for testing and resetting the detector.f. Controller shall include:
(1.) One set of normally open alarm initiation contacts for connection to an initiating device circuit ona fire alarm control panel.
(2.) Two Form−C auxiliary alarm relays for interface with rooftop unit or other equipment.(3.) One Form−C supervision (trouble) relay to control the operation of the Trouble LED on a remote
test/reset station.(4.) Capable of direct connection to two individual detector modules.(5.) Can be wired to up to 14 other duct smoke detectors for multiple fan shutdown applications.
21. Winter start kita. Shall contain a bypass device around the low pressure switch.b. Shall be required when mechanical cooling is required down to 25�F (−4�C).c. Shall not be required to operate on an economizer when below an outdoor ambient of 40�F (4�C).
Specifications subject to change without notice. 135513 21 3607 00
22. Time Guarda. Shall prevent compressor short−cycling by providing a 5−minute delay (2 minutes) before restarting
a compressor after shutdown for any reason.b. One device shall be required per compressor.
23. Electric Heat:a. Heating Section
(1.) Heater element open coil resistance wire, nickel−chrome alloy, 0.29 inches inside diameter,strung through ceramic insulators mounted on metal frame. Coil ends are staked and welded toterminal screw slots.
(2.) Heater assemblies are provided with integral fusing for protection of internal heater circuits notexceeding 48 amps each. Auto reset thermo limit controls, magnetic heater contactors (24 v coil)and terminal block all mounted in electric heater control box (minimum 18 ga galvanized steel)attached to end of heater assembly.
24. Disconnect Switch Bracket (180 size only)a. Provides a pre−engineered and sized mounting bracket for applications requiring a unit mounted
fused and non−fused disconnect of greater than 100 amps. Bracket assures that no damage willoccur to coils when mounting with screws and other fasteners.
25. Hinged Access Panelsa. Shall provide easy access through integrated quarter turn latches.b. Shall be on major panels of: filters, control box, fan motor and compressor.
26. Display Kit for Variable Frequency Drivea. Kit allows the ability to access the VFD controller programs to provide special setup capabilities and
diagnostics.b. Kit contains display module and communication cable.c. Display Kit can be permanently installed in the unit or used on any 2−Speed Indoor Fan Motor sys-
tem VFD controller as needed.
Copyright 2015 International Comfort ProductsLewisburg, Tennessee 37091 USA
www.GoTempstar.com