railings brochure - furnitubes
TRANSCRIPT
RAILINGS BROCHURE
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
108R
AIL
ING
S▼
LIN
X T
raffo
rd R
ailin
g (s
peci
al c
omm
issio
n) in
stal
led
at b
right
on m
arin
a
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
Ent
er s
peci
fic to
pic
here
1093RAILINGS
Where the proximity of pedestrians to traffic could prove hazardous, guardrails are a cost effective, proven way of reducing the chance of tragic accidents.
furnitubes offer an extensive range of post & rail systems, from simple and economic utilitarian steel railings to ornate cast iron designs that are ideal for traditional sites. furnitubes also offer a full design service that enables new and bespoke designs to be developed in collaboration with architects and local authorities.
Railings Introduction 110
Selecting a Rail System 112
Linx™ Railing Systems 114
Stretford & Romney
Composite Rail 126
Harrington & Hackney
Steel Railings 129
PGRM Steel Barriers 132
OKR Pedestrian Barrier 133
HKR Pedestrian Barrier 134
Sockets For Steel Posts 135
Cast Iron Railings 136
Special Commissions 140
Gates 142
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
110R
AIL
ING
S
EXTENSIVE RANGE OF RAILING SYSTEMSour extensive range includes systems that can be utilised to co-ordinate stretches of the highway with combinations of full, 3/4 or 1/2 guardrail, 3-rail, 2-rail, and knee rail configurations. the streetscape can be further enhanced by the selection of matching bollards, designed to complement our guardrails.
RAILINGSintroduction
the simple specif ication of guardrails besidea busy main road or outside a school can mean the difference between a safe, controlled highway or an accident black spot.
furnitubes international has been at the forefront of guardrail provision throughout the uK since it was established over sixty years ago.
▲ LINX 100 ¾ GUARDRAILKnightsbridge Postinstalled at Loughton, essex
▲ MARINE 2-RAILas supplied to ealing, London
▲ LINX 100 FULL GUARDRAILeuston Postinstalled at new cross, London
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
111
Rai
lings
Intr
oduc
tion
CUSTOMISATIONmany of our composite systems can be customised by the mixing and matching of cap and base castings. Post features can be fur ther emphasised by highlighting in contrasting colours.
our sales team will be happy to advise on ways in which each system can be adapted where areas demand special considerations, for example high visibility panels at a pedestrian crossing or differing heights of rail where the ground level is uneven.
LINX™ RAILING SYSTEMfurnitubes modernised the railing system with the introduction of their new generation Linx system - an astonishing, simple revolution in railing design and installation. the Linx’s unique post to panel connection enables modular panels to be f itted and adjusted on site, to a variety of radii and height levels. - see pages 114-125 for more information.
▲ ROCHESTERpost detail
▲ HARRINGTON ¾ GUARDRAILas supplied to Lb Hackney
▲ ROCHESTER 3/4 GUARDRAILhigh visibility panelas supplied to thameside terminal, cliffe, Rochester
▲ LINX 400 3-Railinstalled in Hammersmith, London
▲ LINX 300 2-Raileuston postinstalled at Ashvale canal bridge, Aldershot
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
112R
AIL
ING
S
As well as selecting a guardrail design for aesthetic reasons, it is important to consider how the chosen system will f it the proposed site. it is unlikely that any site is actually f lat and that only straight runs of guardrail will be required - sites usually include hills, bends and awkward junctions around pedestrian crossings etc.
overall site curve or changes in angle achieved by straight rail segments
‘Horizontal’ members follow pavement incline
Horizontal members are plumb level side view
Guardrail TypeSiTe CondiTion
inclined stepped
side view
Guardrail TypeSiTe CondiTion
inclined raked
plan view
Guardrail TypeSiTe CondiTion
curved (or anGled)
segmented
Rails are radiused so concentric to kerb
note: in all situations, posts and vertical panel inf ill bars are manufactured to be installed plumb vertical. We do not recommend that guardrail is installed with the posts perpendicular to an inclined site, i.e. not true vertical.
plan view
Guardrail TypeSiTe CondiTion
curved (or anGled)
radiused
STep 1: aSSeSS The SiTe
seLectinG An APPRoPRiAte RAiLinG sYstem
Guardrail may need to accommodate either inclines or a curved (or angled) kerb line, or a combination of both, as illustrated below. the table on the next page helps with the selection of the correct guardrail to overcome these site variables.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
113
Sel
ectin
g an
App
ropr
iate
Rai
l Sys
tem
STraiGhT
STraiGhT
STraiGhT
Curved (or anGled)
Curved (or anGled)
Curved (or anGled)
Curved (or anGled)
Curved (or anGled)
STraiGhT
STraiGhT
STraiGhT
SeGmenTed
radiuSed
SeGmenTed
radiuSed
radiuSed
site conditions(refer to illustrations on pg 112)
guardrail type(refer to illustrations on pg 112)
guardrail system (refer to index below for full product range available)
further technical information on individual guardrail systems is available on request, including details of the maximum incline and minimum radius that can be achieved by standard components.
side
view
plan
view
level
inClined
inClined
level
level
inClined
inClined
inClined
plan
view
side
view
level
STepped
raked
level
level
STepped
raked
STepped
linx romneyharrG’TnhaCkneyCaST iron
STreTfordokrhkr
pGrm
STandard STandard STandard STandard
key/explanation guardrail system index
these are common components, and may be held as stock items.
linx 100linx 200linx 300linx 400
pgs 114 - 120, 125pgs 114 - 121, 125pgs 114 - 123, 125pgs 114 - 124
okr & hkrSTreTford 115STreTford 75
pg 133 - 134pgs 126 - 127pgs 126 - 127
romneyharrinGTon haCkneyCaST iron ranGeS
pgs 126 - 128pgs 129 - 131pgs 129 - 131pgs 136 - 139
pGrm pg 132
these components are made to order, to precisely f it the site. site survey information (spot heights and relative positions of posts) is therefore required before manufacture can be commenced.
As the table below demonstrates, some guardrail systems f it certain site conditions better than others and we recommend that you carefully consider which system is the most appropriate when making your selection.
Guardrail not available in this configuration.
STandard opTion n/a STandard
n/a n/a opTion n/a
STandard STandard n/a STandard
opTion opTion opTion n/a
STandard opTion n/a STandard
n/a n/a opTion n/a
opTion opTion n/a n/a
linx
okrhkrSTreTford
romneyharrG’TnhaCkneyCaST iron
pGrm
opTion
STandard
n/a
STep 2: ChooSe a SySTem
STep 3: CheCk viSiBiliTyPANELTYPE PANEL LAYOUT
OPTIMUMSIGHT ANGLE WHERE USED
V2 2.5° TO 5° STRAIGHT ROADSMODERATE SPEEDS
V4 5° TO 14° BENDS.SLOW SPEEDS
V8 MORE THAN 14° BELLMOUTHS. SITE WHEREVISIBILITYIS NOT THE MAIN REQUIREMENT
if the guardrail that you select will f it your site with ‘standard’ components only, this will shorten manufacturing lead times and generally speaking will be more cost effective. Also, spare components can be held in stock for replacement purposes at immediate notice rather than made to order - minimising inconvenience and vastly reducing maintenance costs.for a guardrail that requires special components, i.e. those denoted as ‘options’ in the table below, the opposite may apply.
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
114R
AIL
ING
S
• straight runs
for years, the technology surrounding guardrail systems has remained unchanged. in response to increased demand for safety on the highway, furnitubes have designed and developed the patented Linx railing system - an astonishing, simple revolution in guardrail design and installation.
The linx system:
■ utilises standard components
■ doesn’t require radiused panels
■ requires minimal site survey
■ suitable for almost every site
■ available in a range of options
■ 100% recyclable
linx2
00se
ries
linx3
00se
ries
linx1
00se
ries
linx3
00se
ries
the Linx railing system has been designed with every customer in mind, for installation in almost every situation with only a minimal site survey requirement.the Linx’s unique post to panel connection enables modular panels to be fitted and adjusted on site, to a variety of radii and height levels. the modular design also enables clients to keep a ready stock of spare panels for instant replacement should any of the railing system be damaged.
in addition to the standard rectangular rail of the Linx 100 and 200, the Linx 300 and Linx 400 offers a circular rail for more decorative applications.
linxRAiLinGTm
• gradients
• bends, corners
• & all combinations
composite railing system
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
115
Linx
™ R
ailin
g
As a means of improving the line-of-sight between drivers and pedestrians, and increasing safety, furnitubes offer a variety of High Visibility options for Linx panels and posts.
Those involved in specifying and installing guardrail are all too aware of the inflexibility of most systems. the necessity for a full site survey and the manufacture of 'special' components and 'one-offs' to suit specific site conditions is time-consuming and expensive. furthermore, if replacement sections are required after an accident has occurred, the exact damaged components need to be identified and new 'special' components manufactured. this inevitably results in the site being left in disrepair for a long period of time.
linxRAiLinGTm
explained
the Linx range comprises 4 basic series, based on different post and horizontal bar sections and sizes. in each series the post can be fitted with a choice of top caps and collars that enable countless decorative combinations.
the modular design also allows clients to keep a ready stock of spare panels for instant replacement should any of the railing system be damaged.
100 series 200 series 300 series
cast cap variations
linx100 Knightsbridge cap
linx100 trafford cap
linx100 Hale cap
linx100 Ashton cap
linx100 euston cap
The Linx railing system range is a complete solution. the unique, patented post-to-panel connections of the Linx enables standard straight panels to be adjusted in angle and height on site, to suit a variety of curves, bends, junctions and levels.
iT’S So Simple iT’S BrillianT!
▲ LINX 300 3/4 GUARDRAILKnightsbridge post
▲ LINX 100 VISI-POSTS with V2 High Visibility Raileuston post and base collarinstalled at Deptford broadway, London
400 series
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
116R
AIL
ING
S
the following images are taken from a workshop demonstration of the step-by-step assembly sequence for the Linx 100 series patented bracket connection, showing how variable angles and heights can be achieved with standard posts and panels, and therefore how standard components can be used for virtually all sites.
The complete video from which these stills have been taken is available on video CD-ROM. Please contact a member of Furnitubes sales team to request a free copy.
the video cD also contains additional footage of the Linx 100 series during site assembly and of a number of completed installations.
* note: the post shown here is a Linx 100 ‘High Visibility’ post (with sight gap) which requires all brackets to be bolted to the post on site in order to adjust the precise rotation of the post cut-out gap section. the rotation angle of non-visirail posts (without gap) is not important, and brackets are supplied pre-fixed on one side of the post.
FITTING THE BRACKETthe bracket is shaped to suit the post diameter and is fastened by a simple bolt connection to the previously fixed rivnut.
THE BRACKETthe bracket now forms a solid connection on the post. the fixing shown here will be hidden when the railing panel is attached.
OFFERING UP THE RAILINGSthe railing panel, or individual rail is loosely attached to the bracket by the supplied fixings until final adjustment is made.
SECURING THE RAILINGSA small degree of lateral adjustment is achieved by means of the slot in the bracket. once in the correct position, fixings are tightened so the post and panel or rail form a combined solid structure.
THE NEXT PANEL...the bracket is positioned on the post at an angle and height to suit the position of the next post in the line of railings and the assembly sequence as described above is repeated.
THE ASSEMBLY KITAll brackets and fixings are supplied as standard. the only specialist item required is the rivnut tool, available from furnitubes at a nominal price.
MARKING THE BRACKETSWhen the height and angle of the railing has been determined, hole centres for the fixing brackets are marked and centre punched.
DRILLING THE POSTA 12mm diameter hole is drilled through the wall of the post at the marked positions.
THE RIVNUTAs the name suggests, a rivnut is a combination of a rivet and a nut - essentially a rivet that has an internal thread and is shown here being fitted to the rivnut tool with an m10 mandrel.
FITTING THE RIVNUTthe rivnut is fitted to the post via the previously drilled hole and tightened by means of a spanner and rivnut tool. the rivnut now forms a threaded insert onto which a bracket can be securely attached.
* ALL DesiGns incoRPoRAtinG tHe LinX RAiLinG sYstem,
WitH oR WitHout suRfAce DecoRAtion, ARe PRotecteD
bY PAtent no. 2310441 coPYRiGHt / DesiGn RiGHt 1995.
linxRAiLinGTm
installation
bollards pg 46 gates pg 143parking pg 98
RAnGe
litter pg 253
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
117
Linx
™ R
ailin
g
STAINLESS STEEL OPTIONSthe striking, clean-cut look of stainless steel makes it an ideal material for modern eye-catching designs. stainless steel is also extremely hardwearing, corrosion resistant, 100% recyclable and does not require a protective coating. instead it can be polished to either a satin or bright mirror finish.
in addition to its versatility for coping with site variations, the Linx system has also been adapted with a number of unique stainless steel cap designs. furnitubes worked with Haringey council to achieve a double-ringed variation of the Linx 200. the stainless steel cap complements the architectural Art Deco features of the nearby London underground station.
other variations include a single-neck Kenton-style cap and an Ashton cap in stainless steel. to discuss other possibilities please call a member of our dedicated design team.
linxRAiLinG
◄ LINX 300 Railing and Gate with FB14 Padlockwith Ashton stainless steel cap(see page 143 for gate options)
▲ LINX 100with Kenton single-neck stainless steel capwith etched graphics (special commission)shown here in Walthamstow
◄▼ LINX 200with stainless steel capsupplied to Wood Green, London
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
118▼
LIN
X 4
00 ¾
GU
AR
DR
AIL
sat
in p
olish
ed s
tain
less
ste
el, i
nsta
lled
at H
amm
ersm
ith, L
ondo
n
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
119
Linx
™ R
ailin
g
▲ LINX 400 2-Rail (special commission)stainless steel, glass bead blast finishinstalled in Hammersmith, London
▲ LINX 400 3-Railstainless steel, glass bead blast finishinstalled in Hammersmith, London
linxRAiLinGTm
composite railing system
the contemporary stainless steel Linx 400 guardrail system is a new addition to furnitubes revolutionary Linx range.
the stylish Linx 400 railing system is an ideal solution for modern areas, which can be enhanced with this sleek and flexible railing system, available in 100% stainless steel.
NO BRACKETSsimple in design, the rails are attached to unique curved plates which fit flush onto the posts in any position or angle. several options and combinations are available, including different material and cap options.
▲ KENTON CAPdetail
400 series
EXPLODED ASSEMBLYno BraCkeTS
Panels bolt straight onto the post, using riv-nuts and dome head bolts
SeCuriTy BolT
riv-nuT
STainleSS STeel kenTon Cap
poWder CoaTed poST & railinG
STainleSS STeel poST & railinG
OPTIONS■ mild steel, galvanised
■ powder coated mild steel
■ satin polished stainless steel
■ bright polished stainless steel
■ glass bead blast stainless steel
► LINX 400 ¾ GUARDRAILfinish options
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
120R
AIL
ING
S
fRont eLeVAtion & GRounD LeVeL section 1:25
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
linx 100 guardrail range
euston post
lep 100 Fintermediate/corner Post for full Guardrail Panel
lep 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
knightsbridge post
lkp 100 Fintermediate/corner Post for full Guardrail Panel
lkp 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
ashton post
lap 100 Fintermediate/corner Post for full Guardrail Panel
lap 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
hale post
lHp 100 Fintermediate/corner Post for full Guardrail Panel
lHp 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
trafford post
ltp 100 Fintermediate/corner Post for full Guardrail Panel
ltp 100 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 100 guardrail range
euston base collar
eB 100
full guardrail panel
lFr 100 Panel for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:High Visibility PanelHigh Visibility PostRadiused Panel
trafford base collar
tB 100
3/4 guardrail panel
lQr 100 Panel & Rail for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:High Visibility PanelHigh Visibility PostRadiused Panel & Rail
additional joint assembly
lBr 100 Galvanised steel bracket complete with fixings
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:full panel - 2 joints 3/4 panel - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:full panel - 4 joints 3/4 panel - 6 joints.
Ø 115
Ø 115
Ø 115
375
1200
Ø 115
375
1270
Ø 115
Ø 155
150
1090
Ø 200
150
1090
375
1180
375
1275
375
1200
linx 100 series
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
121
Linx
™ R
ailin
g
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:full panel - 2 joints 3/4 panel - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:full panel - 4 joints 3/4 panel - 6 joints.
linx 200 guardrail range
euston post
lep 200 Fintermediate/corner Post for full Guardrail Panel
lep 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
knightsbridge post
lkp 200 Fintermediate/corner Post for full Guardrail Panel
lkp 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
ashton post
lap 200 Fintermediate/corner Post for full Guardrail Panel
lap 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
hale post
lHp 200 Fintermediate/corner Post for full Guardrail Panel
lHp 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
trafford post
ltp 200 Fintermediate/corner Post for full Guardrail Panel
ltp 200 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 200 guardrail range
euston base collar
eB 200
full guardrail panel
lFr 200 Panel for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:Radiused Panel
trafford base collar
tB 200
3/4 guardrail panel
lQr 200 Panel & Rail for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars
options:Radiused Panel & Rail
additional joint assembly
lBr 200 Galvanised steel bracket complete with fixings
375
1160
Ø 75
375
1170
Ø 75
375
1170
Ø 75
375
1220
Ø 75
375
1220
Ø 75
Ø 145Ø 115
150
1090
150
1090
linx 200 series
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
122R
AIL
ING
S
fRont eLeVAtion & GRounD LeVeL section 1:25
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
knightsbridge post
lkp 300 Fintermediate/corner Post for full Guardrail Panel
lkp 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
ashton post
lap 300 Fintermediate/corner Post for full Guardrail Panel
lap 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
hale post
lHp 300 Fintermediate/corner Post for full Guardrail Panel
lHp 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
trafford post
ltp 300 Fintermediate/corner Post for full Guardrail Panel
ltp 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 300 guardrail range
euston post
lep 300 Fintermediate/corner Post for full Guardrail Panel
lep 300 Qintermediate/corner Post for 3/4 Guardrail Panel
options:end Post
linx 300 guardrail range
euston base collar
eB 100
full guardrail panel
lFr 300 Panel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Radiused Panel
trafford base collar tB 100
3/4 guardrail panel
lQr 300 Panel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
additional joint assembly
lBr 300 cast bronze bracket complete with fixings
375
1180
375
1275
Ø 115
Ø 115
375
1200
Ø 115
375
1200
Ø 115
375
1270
Ø 115
Ø 200Ø 155
150
150
1090
1090
TeChniCal
materialfurnitubes cast iron, bronze and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.Junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:full panel - 2 joints 3/4 panel - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:full panel - 4 joints 3/4 panel - 6 joints.
linx 300 series
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
123
Linx
™ R
ailin
g
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
linx 300 post & rail range
euston post
lep 300 r3intermediate/corner Post for 3-Rail
lep 300 r2intermediate/corner Post for 2-Rail
options:end Post
knightsbridge post
lkp 300 r3intermediate/corner Post for 3-Rail
lkp 300 r2intermediate/corner Post for 2-Rail
options:end Post
ashton post
lap 300 r3intermediate/corner Post for 3-Rail
lap 300 r2intermediate/corner Post for 2-Rail
options:end Post
hale post
lHp 300 r3intermediate/corner Post for 3-Rail
lHp 300 r2intermediate/corner Post for 2-Rail
options:end Post
trafford post
ltp 300 r3intermediate/corner Post for 3-Rail
ltp 300 r2intermediate/corner Post for 2-Rail
options:end Post
linx 300 post & rail range
euston base collar
eB 100
3-rail
l3r 300 Ø48 rails for 2m post pitch
trafford base collar
tB 100
2-rail
l2r 300 Ø48 rails for 2m post pitch
additional joint assembly
lBr 300 cast bronze bracket complete with fixings
TeChniCal
materialfurnitubes cast iron, bronze and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112 - 113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and rails are manufactured in steel and supplied in a galvanised finish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.Junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.
to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:2 rail - 2 joints 3 rail - 3 joints.
to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:2 rail - 4 joints 3 rail - 6 joints.
Ø 115
Ø 115
Ø 115
Ø 115
Ø 115
Ø 200Ø 15
5
150
595
375
1200
375
1275
375
1180
375
1200
375
1270
1090
1090
linx 300 series
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
124R
AIL
ING
S
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
linx 400 3-rail lnp 400 poststainless steel
l3r 415 panelto suit 1.5m Post Pitch
l3r 420 panelto suit 2m Post Pitch
TeChniCal
materialfurnitubes steel and stainless steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and panels are manufactured in stainless steel and supplied in a satin finish as standard.
linx 400 series
linx 400 3/4 guardrail range
lnp 400 poststainless steel
lQr 415 panelto suit 1.5m Post Pitch
lQr 420 panelto suit 2m Post Pitch
linx 400 full guardrail
lnp 400 poststainless steel
lFr 415 panelto suit 1.5m Post Pitch
lFr 420 panelto suit 2m Post Pitch
Ø 100
375
1135
Ø 100
375
1135
Ø 100
375
1135
optionsmild steel, GalvanisedPowder coated mild steelsatin Polished stainless steelbright Polished stainless steelGlass bead blast finish
optionsmild steel, GalvanisedPowder coated mild steelsatin Polished stainless steelbright Polished stainless steelGlass bead blast finish
optionsmild steel, GalvanisedPowder coated mild steelsatin Polished stainless steelbright Polished stainless steelGlass bead blast finish
fRont eLeVAtion & GRounD LeVeL section 1:25
1070
1070
1070
130
130
130
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
125
Linx
™ R
ailin
g
1:25 fRont eLeVAtion & GRounD LeVeL section
rail
l1r 200 60 x 40 Knee-Rail for 2m post pitch
options:Radiused Rail
linx 100 knee-rail range
euston post
lek 100 intermediate/corner Post for Knee-Rail
options:end Post
knightsbridge post
lkk 100 intermediate/corner Post for Knee-Rail
options:end Post
ashton post
lak 100 intermediate/corner Post for Knee-Rail
options:end Post
hale post
lHk 100 intermediate/corner Post for Knee-Rail
options:end Post
trafford post
ltk 100intermediate/corner Post for Knee-Rail
options:end Post
rail
l1r 100 60 x 40 Knee-Rail for 2m post pitch
options:Radiused Rail
linx 200 knee-rail range
euston post
lek 200 intermediate/corner Post for Knee-Rail
options:end Post
knightsbridge post
lkk 200 intermediate/corner Post for Knee-Rail
options:end Post
ashton post
lak 200 intermediate/corner Post for Knee-Rail
options:end Post
hale post
lHk 200 intermediate/corner Post for Knee-Rail
options:end Post
trafford post
ltk 200intermediate/corner Post for Knee-Rail
options:end Post
linx 300 knee-rail range
euston post
lek 300 intermediate/corner Post for Knee-Rail
options:end Post
knightsbridge post
lkk 300 intermediate/corner Post for Knee-Rail
options:end Post
ashton post
lak 300 intermediate/corner Post for Knee-Rail
options:end Post
hale post
lHk 300 intermediate/corner Post for Knee-Rail
options:end Post
trafford post
ltk 300intermediate/corner Post for Knee-Rail
options:end Post
rail
l1r 300 Ø48 Knee-Rail for 2m post pitch
250
540
Ø 115
Ø 115
250
560
Ø 115
Ø 115
Ø 115
250
540
250
520
Ø 115
Ø 115
Ø 115
Ø 115
250
630
Ø 115
Ø 75 Ø 75 Ø 75 Ø 75 Ø 7525
058
0
450
250
635
250
560
250
630
450
250
530
250
580
250
530
250
560
250
635
250
560
450
linx 200 series
linx 100 series
linx 300 series
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.
TeChniCal
materialfurnitubes cast iron, bronze and steel railings are 100% recyclable.
Suitabilitybefore making your f inal guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts and rails are manufactured in steel and supplied in a galvanised f inish as standard.
Post caps & collars are in cast iron and supplied in a primed finish.Linx 300 junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.
3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & f ixings.
to convert an intermediate post to a 3-way post, 1 additional joint assembly is required.
to convert an intermediate post to a 4-way post, 2 additional joint assemblies are required.
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
126R
AIL
ING
S
furnitubes’ Romney guardrail system, as pictured here, is a simple modern design.
the product has a post which has been especially designed to accommodate corporate logos into the top cast junction boss.
furnitubes’ composite barriers are manufactured from steel and cast iron, offering a combination of strength, reliable protection and durability to help ensure pedestrian safety wherever they are specified. composite bollards have also been created to support rail applications. further details appear in the bollards section.
the Stretford guardrail is a popular choice among specifiers due to its flexibility. the panels are able to follow the line of a gentle curve in a segmented arrangement, as can be seen in the picture on this page. this could preclude the need for a costly site survey and the production of specially radiused panels. the stretford is available with a wide range of top and base castings and in two different post diameters.
STRETFORD & ROMNEYcomposite rail systems
▲ STRETFORD FULL GUARDRAILAshton post
◄ ROMNEY FULL GUARDRAIL
▼ ROMNEY FULL GUARDRAILwith corporate logo (special commission) supplied to st Georges Wharf, Vauxhall
Durability and reliability combined with functional good looks are essential qualities for all guardrail systems.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
127
Com
posi
te R
ail S
yste
ms
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
stretford 115 guardrail range
ashton post
sap 115 Fintermediate Post for full Guardrail Panel
sap 115 Qintermediate Post for 3/4 Guardrail Panel
optionsend Postcorner Post
hale post
sHp 115 Fintermediate Post for full Guardrail Panel
sHp 115 Qintermediate Post for 3/4 Guardrail Panel
options:end Postcorner Post
trafford post
stp 115 Fintermediate Post for full Guardrail Panel
stp 115 Qintermediate Post for 3/4 Guardrail Panel
options:end Postcorner Post
full guardrail panel
sFr 115Panel for 2m post pitch70 x 8 horizontal rails16 sq vertical infill bars
options:High Visibility PanelRadiused Panel
3/4 guardrail panel
sQr 115Panel & Rail for 2m post pitch60 x 40 top rail70 x 8 horizontal panel rails16 sq vertical infill bars
options:High Visibility PanelRadiused Panel
trafford collar
tB 100
stretford 75 guardrail range
ashton post
sap 75 Fintermediate Post for full Guardrail Panel
sap 75 Qintermediate Post for 3/4 Guardrail Panel
options:end Postcorner Post
hale post
sHp 75 Fintermediate Post for full Guardrail Panel
sHp 75 Qintermediate Post for 3/4 Guardrail Panel
options:end Postcorner Post
trafford post
stp 75 Fintermediate Post for full Guardrail Panel
stp 75 Qintermediate Post for 3/4 Guardrail Panel
options:end Postcorner Post
full guardrail panel
sFr 75Panel for 2m post pitch70 x 8 horizontal rails16 sq vertical infill bars
options:High Visibility PanelRadiused Panel
3/4 guardrail panel
sQr 75Panel & Rail for 2m post pitch60 x 40 top rail70 x 8 horizontal panel rails16 sq vertical infill bars
options:High Visibility PanelRadiused Panel
trafford collar
tB 200
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.
350
1125
Ø 115
Ø 115
Ø 115
Ø 200
120
120
Ø 145
Ø 75 Ø 75 Ø 75
350
1100
1020
1020
350
1200
350
1125
350
1100
350
1150
1020
120
120
1020
stRetfoRD GuARDRAiL RAnGe
1:25 fRont eLeVAtion & GRounD LeVeL section
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
128R
AIL
ING
S
90
romney guardrail and post & rail range
full guardrail post
rmd 2rintermediate Post for full Guardrail Panel
options:end Post
full guardrail panel
rmdr FPanel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Raked PanelRadiused Panel
3/4 guardrail post
rmd 3rintermediate Post for 3/4 Guardrail Panel
options:end Post
3/4 guardrail panel
rmdr s1QPanel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Raked Panel & RailRadiused Panel & Rail
3-rail post
rmd 4rintermediate Post for 3-Rail
options:end Post
3-rail
rmdr s3Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
romney post & rail range
2-rail high post
rmd 5rintermediate Post for 2-Rail High
options:end Post
2-rail
rmdr s2Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
2-rail low post
rmd 6rintermediate Post for 2-Rail Low
options:end Post
2-rail
rmdr s2Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
knee-rail post
rmd 7rintermediate Post for trip-rail
options:end Post
1-rail
rmdr s1Ø48 rail for 2m post pitch
options:Raked RailRadiused Rail
Ø 7535
011
35
Ø 75 Ø 75
Ø 75 Ø 75
Ø 75
350
690
595
250
495
1090
645
450
1090
1090
350
1135
350
1135
150
150
150
350
1135
1090
150
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
materials & finishPost stems and panels are manufactured in steel and supplied in a galvanised finish as standard.Post junctions are in s.G iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.
logo Bossesthe Ø70 circular bosses are on only one side of the rail junctions and are left plain as standard. Alternatively, they may be utilised for raised relief logos or completely removed upon special request.
RomneY GuARDRAiL RAnGeRomneY Post & RAiL RAnGe
fRont eLeVAtion & GRounD LeVeL section 1:25
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
129
Ste
el R
ailin
gs
the beauty of steel is its consistent tensile strength. economy and material sizes can be balanced to ensure that a particular barrier provides a specific level of protection.
HARRINGTON & HACKNEYsteel railings
▲ HARRINGTON 3/4 GUARDRAIL installed in Greenwich, London
▲ HARRINGTON 3/4 GUARDRAILwith gold highlightingas supplied to bulverhythe Road, st Leonards on sea
furnitubes steel barriers, manufactured to the highest standards can be fabricated to meet the needs of any individual site. steel is also fully recyclable.
▲ HARRINGTON 3/4 GUARDRAIL as supplied to college Approach, Greenwich, London
the Hackney post and rail system is based on the design of the Harrington. it utilises the use of a bracket, allowing rails to be fixed to the post using just one bolt, thus making installation easier and provides more freedom on complex sites.
▲ HACKNEY 3/4 GUARDRAIL bracket detailsupplied to Lb Hackney
the Harrington post and rail system not only offers the protective advantages of steel but has the elegance and traditional appearance of cast iron.
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
130R
AIL
ING
S
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
harrington post & rail range
2-rail high post
Har 5rintermediate Post for 2-Rail High
options:end Postcorner Postbase Plated
2-rail
Harr s2Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
2-rail low post
Har 6rintermediate Post for 2-Rail High
options:end Postcorner Postbase Plated
2-rail
Harr s2Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
knee-rail post
Har 7rintermediate Post for Knee-Rail
options:end Postcorner Postbase Plated
rail
Harr s1Ø48 rail for 2m post pitch
options:Raked RailRadiused Rail
harrington guardrail and post & rail range
full guardrail post
Har 2rintermediate Post for full Guardrail Panel
options:end Postcorner Postbase Plated
full guardrail panel
Harr FPanel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Raked PanelRadiused Panel
3/4 guardrail post
Har 3rintermediate Post for 3/4 Guardrail Panel
options:end Postcorner Post base Plated
3/4 guardrail panel
Harr s1QPanel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Raked Panel & RailRadiused Panel & Rail
3-rail post
Har 4rintermediate Post for 3-Rail
options:end Postcorner Post base Plated
3-rail
Harr s3Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
see note 1 see note 1
TeChniCal
materialfurnitubes steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
materials & finishPost and panels are manufactured in steel and supplied in a galvanised finish as standard.We recommend that top coats are applied on site after installation.
high visibility panelsmaterials sections for high visibility panels are as follows:Horizontal panel rails - 50 sqVertical infill bars - Ø16 top rail (3/4 only) - 50 sq or Ø48
note 1
Ø 7535
011
60
Ø 7535
011
60
Ø 7535
011
60
90 90 90
Ø 7535
011
60
Ø 75
Ø 75
350
705
550
90
250
585
1050
1050
1050
590
475
1050
fRont eLeVAtion & GRounD LeVeL section 1:25
HARRinGton GuARDRAiL RAnGeHARRinGton Post & RAiL RAnGe
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
131
Ste
el R
ailin
gs
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
hackney post & rail range
2-rail high post
Hac 5rintermediate Post for 2-Rail High
options:end Postcorner Postbase Plated
2-rail
Hacr s2Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
2-rail low post
Hac 6rintermediate Post for 2-Rail High
options:end Postcorner Postbase Plated
2-rail
Hacr s2Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
knee-rail post
Hac 7rintermediate Post for Knee-Rail
options:end Postcorner Postbase Plated
rail
Hacr s1Ø48 rail for 2m post pitch
options:Raked RailRadiused Rail
hackney guardrail and post & rail range
full guardrail post
Hac 2rintermediate Post for full Guardrail Panel
options:end Postcorner Postbase Plated
full guardrail panel
Hacr FPanel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Raked PanelRadiused Panel
3/4 guardrail post
Hac 3rintermediate Post for 3/4 Guardrail Panel
options:end Postcorner Postbase Plated
3/4 guardrail panel
Hacr s1QPanel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars
options:Raked Panel & RailRadiused Panel & Rail
3-rail post
Hac 4rintermediate Post for 3-Rail
options:end Postcorner Post base Plated
3-rail
Hacr s3Ø48 rails for 2m post pitch
options:Raked RailsRadiused Rails
see note 1 see note 1
TeChniCal
materialfurnitubes steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
materials & finishPost and panels are manufactured in steel and supplied in a galvanised finish as standard.We recommend that top coats are applied on site after installation.
high visibility panelsmaterials sections for high visibility panels are as follows:Horizontal panel rails - 50 sqVertical infill bars - Ø16 top rail (3/4 only) - 50 sq or Ø48
note 1
Ø 7535
011
60
Ø 7535
011
60
Ø 7535
011
60
90 90 90
Ø 7535
011
60
Ø 75
Ø 75
350
705
550
90
250
585
1050
1050
1050
590
475
1050
1:25 fRont eLeVAtion & GRounD LeVeL section
HAcKneY GuARDRAiL RAnGeHAcKneY Post & RAiL RAnGe
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
132R
AIL
ING
S
in addition to preventing pedestrians from crossing or walking into high traffic areas, they can also be used to designate safe crossing places at dangerous crossing points such as junctions and bends. PGRm Pedestrian Guardrails are manufactured in standard two metre panels and are available as full Pedestrian Guardrail, 3/4 Pedestrian Guardrail and 2-bar Handrail.
fRont eLeVAtion & GRounD LeVeL section 1:25
TeChniCal
materialfurnitubes steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPost and panels are manufactured in steel and supplied in a galvanised finish as standard.We recommend that top coats are applied on site after installation.
325
1050
2000
2000
2000
325
1050
325
1050
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
PGRMsteel barriersPedestrian Guardrails ‘PGRm’ are an inexpensive and effective solution in improving traffic safety.
full pedestrian guardrail
pgrm 100Galvanised steel50 x 30 frameØ12 vertical infill bars
options:Polyester Powder coatedstainless steelHigh Visibility Panel
3/4 pedestrian guardrail
pgrm 200Galvanised steel 50 x 30 frameØ12 vertical infill bars
options:Polyester Powder coatedstainless steelHigh Visibility Panel
2-bar pedestrian handrail
pgrm 2rGalvanised steel 50 x 30 frame
options:Polyester Powder coatedstainless steel
▲ P
GR
M 2
00in
stal
led
at W
estfi
eld
Shop
ping
Cen
tre,
She
pher
d’s
Bush
, Lon
don
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
133
Ped
estr
ian
Gua
rdra
il
the oKR is produced using high visibility panels which maximise the motorist’s vision from any angle. the staggered vertical bars of the high visibility panels have the visual effect of creating space when viewed at an angle allowing motorists to see pedestrians approaching a crossing point. this is the ideal solution at high risk areas such as outside schools.
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
okr post & rail range
end post
okr 301 end Post
TeChniCal
materialfurnitubes steel railings are 100% recyclable.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
finishPosts and rails are manufactured in steel and supplied in a galvanised finish as standard. We recommend that top coats are applied on site after installation.
oKR railings can be supplied black Powder coated. However, furnitubes cannot be held responsible for any damage during transit.
removable Socketsfurnitubes offer the fi socket to suit the 50 x 50 oKR railing posts - see page 135.
guardrail panel with balls
okr 306Panel for 2m post pitch70 x 8 horizontal rails with balls on top12 square vertical infill bars
options:High Visibility Panel
intermediate post
okr 302intermediate Post
1000
50 sq
guardrail panel without balls
okr 305Panel for 2m post pitch70 x 8 horizontal rails12 square vertical infill bars
options:High Visibility Panel
100
OKRsteel railings
300
1070
▲ OKR GUARDRAIL V2 - high visibilitygalvanised steel version with balls on top of panel
the oKR steel railings utilise hooped rings and forged balls in an extremely popular and decorative design.
▲▼ OKR V4 GUARDRAIL - high visibilitywith balls on top of panelinstalled on Kennington Lane, London
2000
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
134R
AIL
ING
S
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes steel railings are 100% recyclable.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
finishPosts and rails are manufactured in steel and supplied in a galvanised finish as standard. We recommend that top coats are applied on site after installation.
HKR railings can be supplied Powder coated. However, furnitubes cannot be held responsible for any damage during transit.
removable Socketsfurnitubes offer the fi socket to suit the 50 x 50 HKR railing posts - see page 135.
50 sq
100
HKRsteel railings
300
1000
▲ HKR GUARDRAILwith V4 high visibility panelused in sites in Hammersmith & fulham
the HKR railings utilise high visibility panels which maximise the motorist’s line of sight.
the staggered vertical bars of the high visibility panels have the visual effect of creating space when viewed at an angle allowing motorists to see pedestrians approaching a crossing point. this is the ideal solution at high risk areas such as outside schools.
hkr post & rail range
end post
Hkr 301 end Post
guardrail panel
Hkr 308Panel for 2m post pitch70 x 8 horizontal rails12 square vertical infill bars
options:High Visibility Panel
intermediate post
Hkr 302intermediate Post
900
PANELTYPE PANEL LAYOUT
OPTIMUMSIGHT ANGLE WHERE USED
V2 2.5° TO 5° STRAIGHT ROADSMODERATE SPEEDS
V4 5° TO 14° BENDS.SLOW SPEEDS
V8 MORE THAN 14° BELLMOUTHS. SITE WHEREVISIBILITYIS NOT THE MAIN REQUIREMENT
▲ HIGH VISIBILITY CHART
2000
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
135
Ped
estr
ian
Gua
rdra
il
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
F1 75composite Removable socketwith cast iron Lid and Key.
to accept Ø75mm diameterLinx 200, stretford 75, Romney or Harrington posts
options:shallow mount
175
8533
5
sometimes it is necessary for railings to be removable to allow them to be taken away during special occasions or for access to manhole services below. furnitubes f1 socket is suitable for this task.
set socket in concrete. Align along the direction of the railings.
foundation notePrepare hole at least 75mm deeper than overall height of the socket and fill below with hard-core or gravel to allow for drainage.
Place the socket in the centre of the hole, ensuring that there is good clearance on all sides, and hold in vertical position.
Pour concrete and compact well and check that socket is vertical until it has set.
note: if existing ground is loose or uncompacted, a wider/deeper base of concrete should be used.
160
345
300
F1 115composite Removable socket with cast iron Lid and Key. to accept Ø115mm diameterLinx 100, Linx 300 or stretford 115 posts
options:shallow mount
21.5 kg
F1 50composite Removable socketwith steel Lid.
to accept 50mm squareoKR & HKR railing post
130
270
300
11.5 kg
the FI 50 socket is designed to accept a 50mm square post profile, which makes it ideal for use with the oKR and HKR railing systems, while the FI 75 and FI 115 are suited for our larger railing systems.
they are of robust composite steel construction, with one hole to accept the railing post and another to access the internal retention bolts. these bolts enable the socket to firmly grip the post.
two lids are also supplied per socket, one to hide these bolts and the other to cover the main hole when not in use. further details are provided on pages 60 and 61 of the bollards section.
■ aesthetically pleasing solution
■ neat retention bolts hidden from view
■ strong composite construction
■ removal of posts within a few minutes
■ can be blanked off when a post is not used
5.5 kg
F1 SOCKETSfor steel posts
reTaininG BolT
(stainless steel)
main Body(coated cast iron)
lidS
(coated stainless steel)
all fixinGS
(stainless steel)
▲ F1 50 SOCKET
TeChniCal
F1 50 x 60composite Removable socketwith steel Lid
to accept two PGRm posts
F150 F148 F150 x 60
175
8533
5
fi socket range
F1 48composite Removable socketwith steel Lid
130
185
7 kg5.5 kg
fix pressure plate loosely in place. Withdraw bolt to allow the post to enter.
slide post into socket. tighten bolt fully to secure post.
Replace lid and bolt securely.
F150 F148 F150 x 60
335
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
136R
AIL
ING
S
furnitubes manufacture one of the widest and most comprehensive range of cast iron post & rail systems on the market today. often selected for its aesthetic qualities, cast iron gives a timeless elegance to towns and heritage areas.
CAST IRONrail barriers
▲ REIGATE 3-RAILas supplied to Park Royal, London
▲ REIGATE FULL GUARDRAIL
▲ REIGATE 3-RAILrails bend at corners to reduce damage on impact
cast iron is corrosion resistant and therefore ideal for seafronts, piers, marinas and canals where a low maintenance system is required. Public safety is paramount and careful positioning of post & rail directs pedestrians away from danger especially at roadside, waterside or other high-risk areas.
the Reigate post has been designed specifically to accommodate a variety of rail systems. full, 3/4 or 1/2 guardrail, 3-rail, 2-rail and trip-rail. this diversity allows a variety of options for multiple applications within the same general area.
furnitubes cast iron railings are recommended with bent corners. this allows any angle to be achieved instead of the standard 90 degrees. this arrangement also allows for easy replacement if damaged as the post is more likely to remain intact.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
137
Cas
t Iro
n R
ail B
arrie
rs
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPost are manufactured in cast iron and supplied in a primed finish as standard.Panels are in steel and supplied in a galvanised finish.
We recommend that top coats are applied on site after installation.
1:25 fRont eLeVAtion & GRounD LeVeL section
reigate guardrail range
full guardrail post
rei 351intermediate Post for full Guardrail Panel
options:end Postcorner Postbaseplate
full guardrail panel reir F Panel for 2m post pitchØ42 horizontal railsØ16 vertical infill bars
options:Raked PanelRadiused Panel
3/4 guardrail post
rei 352intermediate Post for 3/4 Guardrail Panel
options:end Postcorner Postbaseplate
3/4 guardrail panel
reir s1Q Panel & Rail for 2m post pitchØ42 horizontal railsØ16 vertical infill bars
options:Raked Panel & RailRadiused Panel & Rail
1/2 guardrail post
rei 353intermediate Post for 1/2 Guardrail Panel
options:end Postcorner Postbaseplate
1/2 guardrail panel
reir s1H Panel & Rail for 2m post pitchØ42 horizontal railsØ16 vertical infill bars
options:Raked Panel & RailRadiused Panel & Rail
reigate post & rail range
3-rail post
rei 353intermediate Post for 3-Rail
options:end Postcorner Postbaseplate
rail mst 42 Ø42 rail supplied in 6.4-6.5m random length
trip-rail post
rei 356intermediate Post for trip-Rail
options:end Postcorner Postbase PlatedKnee Rail
rail
mst 42 Ø42 rail supplied in 6.4-6.5m random length
100
sq30
012
25
200
100
sq30
012
25
100
sq20
034
5
100
sq30
012
25
630
100
sq30
012
25
200
100
sq
200
1120
1120
300
1225
1120
1120
200
2-rail post
rei 354intermediate Post for 2-Rail
options:end Postcorner Postbaseplate
rail
mst 42 Ø42 rail supplied in 6.4-6.5m random length
ReiGAte GuARDRAiL RAnGeReiGAte Post & RAiL RAnGe
1120
240
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
138R
AIL
ING
S
marine post & rail
2-rail post
mar 751intermediate Post for 2-Rail
options:end Postcorner Post
rail mst 42Ø42 rail supplied in 6.4-6.5m random length
270
1050
445
Ø 150
880
▲ ROCHESTER 3/4 GUARDRAILwith high visibility panelas supplied to Rochester, Kent
rochester guardrail
3/4 guardrail post
rcH 426intermediate Post for 3/4 Guardrail Panel
options:end Post
3/4 guardrail panel rcHr s1Q Panel & Rail for 2m post pitchØ60 top rail50 sq horizontal panel railsØ16 vertical infill bars
options:High Visibility PanelRaked Panel & Rail
100
sq30
012
10
100
1060
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts are manufactured in cast iron and supplied in a primed finish as standard.Panels and/or rails are in steel and supplied in a galvanised finish.
We recommend that top coats are applied on site after installation.
fRont eLeVAtion & GRounD LeVeL section 1:25
▲ MARINE 2-RAIL
ROCHESTER & MARINE POST & RAILthe decorative Rochester post and rail system was named after the city of Rochester where it was first installed. the Rochester, as with most of our railing systems, is available with high visibility panels, and has been supplied in sG iron for roadside use.
the Marine 2-Rail is ideal for seafront areas.
CAST IRONrail barriers
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
139
Cas
t Iro
n R
ail B
arrie
rs
1:25 fRont eLeVAtion & GRounD LeVeL section
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
windsor post & rail
2-rail post
win 536intermediate Post for 2-RailRoot fixed
options:end Postcorner Post
rail mst 48 Ø48 rail supplied in 6.4-6.5m random length
hove post & rail
knee-rail post
Hov 450intermediate Post for Knee-Rail
options:end Postcorner Post
rail
mst 33Ø33 rail supplied in 6.4-6.5m random length
TeChniCal
materialfurnitubes cast iron and steel railings are 100% recyclable.
Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.
product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.
materials & finishPosts are manufactured in cast iron and supplied in a primed finish as standard.Panels and/or rails are in steel and supplied in a galvanised finish.
We recommend that top coats are applied on site after installation.
100
sq30
010
80
450
320
200
440
75 sq
930
350
hammersmith riverside post & rail
2-rail post
Ham 532intermediate Post for 2-Railbolt Down
options:end Postcorner Post
rail mst 48 Ø48 rail supplied in 6.4-6.5m random length
1125
940
460
165
sq
HAMMERSMITH & WINDSOR POST & RAILthe Hammersmith Riverside and Windsor designs have become increasingly popular throughout the country and are a standard specification with many local authorities. fully painted and highlighted railings are available giving identity to an area, however for the best results furnitubes recommend that railings are painted on site after installation.
▲ WINDSOR 2-RAILas installed in to beckenham, bromley
▲ HOVE KNEE-RAIL
rail barriersCAST IRON
▲ HAMMERSMITH RIVERSIDE 2-RAIL
HOVE KNEE RAILthe Hove knee-rail is one of the most popular cast iron knee-rails in the uK. used primarily as an attractive edging for lawns and landscaped areas it restricts access without intruding upon the general streetscape.
130
Ø12 holes
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
140R
AIL
ING
S
furnitubes’ design team were sensitive to conservation when asked to extend the existing railings along eastbourne seafront. the post & rail pictured here is an exact replica of the unusual cast aluminium original.
While the main function of guardrail is to protect the public from the highway, many systems can be adapted to either incorporate access gates (see page 142) or tailored for wall-top installation, as shown here.
COMMISSIONSspecial
▲ R
eplic
a C
ast A
lum
iniu
m R
ailin
gs
▲ D
ecor
ativ
e St
eel R
ailin
gs
current trends are placing more demands on suppliers of street furniture to develop new and distinctive products, enhancing the appearance of the built environment and providing a real sense of location.
▲ ROMNEY FULL GUARDRAILwith corporate logo (special commission) supplied to st George’s Wharf, Vauxhall
SPECIAL SITESthe Linx Railing was adapted to replace the existing railings at brighton marina. trafford capped posts were supplied with a bolt-down plate to fix to the existing foundations.
the Romney Guardrail installed at st Georges Wharf, Vauxhall, has been adapted to incorporate timber handrails to create an attractive contrast between natural timber and painted steel.
▲ LINX RAILINGStrafford cap (special commission)supplied to brighton marina
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
141
Spe
cial
Com
mis
sion
s
CaST iron BollardS aS railinG poSTSfurnitubes’ design team have researched new uses for traditional cast iron bollards, and the flexibility of our standard products means that it is possible to adapt items in a way which most readily suits the requirements of our clients.
Right, a standard Holborn bollard has been adapted to accept two rail posts. this versatility permits a uniform appearance with other items of street furniture and with existing bollards. standard cast iron bollards can be adapted to act as barriers, railings, fencing and gate posts.
many of these items are exclusive to furnitubes international, such as the belsize whose design was taken from an original Victorian bollard at belsize Park in Hampstead. furnitubes’ pattern makers skillfully produced a faithful copy which was then cast and adapted to take a circular section rail.
for the complete range of bollards that complement or can be adapted for post & rail applications please refer to the bollards section.
◄▼ EDINBURGH Bollardas railing post (special commission)
▲ BELSIZE Bollardas railing post
▲ CANNON Bollardas railing post
Railings can also be designed to work in conjunction with many of furnitubes’ products. Here a Linx 100 panel fits seamlessly into a bell traffic bollard. the bell protects the post from damage and the post provides increased visibility and safety.
▲ LINX with BELL BOLLARD(see bollards section)
▲ HOLBORN 2-RAILinstalled at bessborough Gardens, Vauxhall, London
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
142R
AIL
ING
S
While the main function of guardrail is to protect the public from the highway, many systems can be adapted to either incorporate access gates as shown here with the PGRM and Reigate 1/2-rail. the frame, hinge and hasps are manufactured from structural steel and fully galvanised to optimise endurance and strength. fixings are generally supplied in stainless steel.
furnitubes design team are always on hand to discuss bespoke gate requirements. they are able to advise on the most suitable types of post to suit a particular application and to propose feasible designs for the gate framework.
GATES
PGRM Double Leaf Gate ▲
CAST IRON REIGATE ▲½ rail with gate
iLLustRAtions not to scALe
pgrm gate
single leaf
pgsl 100 - PGRm 1 metre gate pgsl 200 - PGRm 2 metre gate
pgsl 300 - PGRm 3 metre gate
pgsl 400 - PGRm 4 metre gate
double leaf
pgdl 100 - PGRm 1 metre gate pgdl 200 - PGRm 2 metre gate
pgdl 300 - PGRm 3 metre gate
pgdl 400 - PGRm 4 metre gate
cLeARAnce
450
1050
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes steel gates are 100% recyclable.
finishGates are supplied in a galvanised finish.
padlockfor use with an fb padlock - not supplied - available upon request.
ClearanceGates can be designed to suit any specification, please contact sales to discuss your site requirements.
cLeARAnce
390
1050
Galvanised steel Gate
options:3/4 Panel2-Rail PanelHi Visibility Panelstainless steel
Galvanised steel Gate
options:3/4 Panel2-Rail PanelHi Visibility Panelstainless steel
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
143
Gat
es
3770
USE THIS ONE!! IT IS SCALED CORRECTLY @ 1:25
furnitubes patented Linx™ railing system can also incorporate gates, providing access for areas whilst keeping consistency within a scheme.
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes Linx gates are 100% recyclable.
finishcast iron posts caps are supplied in a primed finish and steel posts and gate fabrication is supplied in a galvanised finish.
padlockfor use with an fb padlock - not supplied - available upon request.
the Linx gate is available in steel or stainless steel can be single or double leaf. the gate can have a clearance of up to 4 metres, and is compatible with all four Linx series. see page 115 for the range of caps available.
gate
cLeARAnce
▲ LINX 100 Gatedouble leaf with euston cap
linxTm
bollards pg 46 railings pg 114parking pg 98
RAnGe
litter pg 253
▲ LINX 300 GATE¾ rail double leaf gate with stainless steel Ashton caps
installed in Leytonstone, essex (special commission)
375
1180
1090
iLLustRAtions not to scALe
linx gate
single leaf
lgsl 001 - Linx 1 metre gate lgsl 002 - Linx 2 metre gate
lgsl 003 - Linx 3 metre gate
lgsl 004 - Linx 4 metre gate
double leaf
lgdl 001 - Linx 1 metre gate lgdl 002 - Linx 2 metre gate
lgdl 003 - Linx 3 metre gate
lgdl 004 - Linx 4 metre gate
Galvanised steel Gate
options:Linx 100 GateLinx 200 GateLinx 300 GateLinx 400 Gate3/4 PanelHi Visibility panelstainless steel
Galvanised steel Gate
options:Linx 100 GateLinx 200 GateLinx 300 GateLinx 400 Gate3/4 PanelHi Visibility panelstainless steel
© 2012 Copyright Reproduction Prohibited
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com
144R
AIL
ING
S
for secured access, furnitubes also offer a heavy duty gate, utilising reinforced telford bollards in s.G iron for excellent strength characteristics.
1:25 fRont eLeVAtion
telford gate range
2900 clearance
tgt 290 telford sG cast iron bollardssteel Galvanised Gate fabrication
options:Locking PostReflective sign
3420 clearance
tgt 340telford sG cast iron bollardssteel Galvanised Gate fabrication
options:Locking PostReflective sign
4500 clearance
tgt 450telford sG cast iron bollardssteel Galvanised Gate fabrication
options:Locking PostReflective sign
both the Holborn and telford gates comprise of a hinge bollard, a locking bollard, plus an optional additional bollard to secure the gate when in the open position. bollards require a foundation depth of 800mm.
the gate is available with a clearance width of either 2900mm, 3420mm or 4500mm. ‘Emergency Access - Keep Clear’ reflective sign plates are also available.
TELFORD & HOLBORNgates
cLeARAnce
800
1015
870
▲ TELFORD Gatewith sign platesupplied to Lb Lewisham
Hinge Detail ▲
▲ TELFORD Gatewith sign plate & optional locking bollard
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes cast ironand steel gates are 100% recyclable.
finishPosts are supplied in a primed finish and steelgate fabrication is supplied in a galvanised finish. We recommend that top coats are applied on site after installation.
padlockfor use with an fb padlock - not supplied - available upon request.
Signoptional “emeRGencY Access - KeeP cLeAR” white on red reflective sign can be fitted both sides.
TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited
145
Gat
es
1:25 fRont eLeVAtion
holborn gate range
2900 clearance
Hol 290 Holborn composite bollardssteel Galvanised Gate fabrication
options:Locking PostReflective sign
3420 clearance
Hol 340Holborn composite bollardssteel Galvanised Gate fabrication
options:Locking PostReflective sign
4500 clearance
Hol 450Holborn composite bollardssteel Galvanised Gate fabrication
options:Locking PostReflective sign
cLeARAnce
800
1170
900
▲ HOLBORN Gate
Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TeChniCal
materialfurnitubes cast ironand steel gates are 100% recyclable.
finishGate and posts are supplied in a galvanised finish. Decorative castings are supplied primed. We recommend that top coats are applied on site after installation.
padlockfor use with an fb padlock - not supplied - available upon request.
Signoptional “emeRGencY Access - KeeP cLeAR” white on red reflective sign can be fitted both sides.
gatesTELFORD & HOLBORN
the Salisbury composite bollard (see page 45) can also be adapted as gate posts. Please call our technical sales department for further details.
▲ HOLBORN Gatepainted steel bollard with galvanised steel gate with sign plate (special commission)supplied to Lb Hammersmith & fulham
Furnitubes International LimitedMeridian House, Royal Hill
Greenwich, LondonSE10 8RD
tel +44 (0)20 8378 3200fax +44 (0)20 8378 3250www.furnitubes .com
For possible modifications or updates, please refer to www.furnitubes.com
© Furnitubes 2012