RADWIN 2000Release 2.3&WinLink 1000 Release 1.9&BDU Release 6.2

Product Management

2

Main New Features

Feature RADWIN 2000 WinLink 1000

HSS V V

Monitored Hot Standby (MHS 1+1)

V V

Diversity V

Spectrum View V

3

Hub Site Synchronization

No more limitations

HSS between RADWIN 2000 radios

WinLink 1000 radios

RADWIN 2000 and WinLink 1000 radios

HSS up to 16 radios in a site

Fully supported by RADWIN Manager

Supported by software upgrade to RADWIN 2000 install base

All RADWIN 2000 radios in the field are HW ready for HSS

4

HSS Applications

Backhaul HSS is needed in installations

where a RADWIN 2000 link is the backhaul for many lower capacity access links

The backhaul link can be synchronized to the access links to mitigate potential mutual interference

Access and Corporate Connectivity Where any links originate from a common hub site

With HSS by RADWIN 2000 such applications now support high capacity connectivity

Attack Plan Identify existing customers

with mixed network of WinLink 1000 and RADWIN 2000

Propose the HSS solution for mixed deployment

5

Monitored Hot Standby (MHS) 1+1

Providing redundancy and backup to TDM services

Targeted for Cellular backhaul

Providing protection against Equipment failure (ODU and IDU) Loss of air interface

Using a primary link and a secondary link:

Two RADWIN 2000 links A RADWIN 2000 link and a WinLink

1000 link with new IDU-C Two WinLink 1000 links with new

IDU-C (single dual-pol antenna can be used)

6

MHS Applications

Provide high reliability high-capacity Point-to-Point links

Provide redundancy and high reliability for carrier class operators

Optimized for high capacity links operating in license-free bands

Additional values: Each link can use a different band for maximum protection to

the air interface Affordable SLA can be offered by protecting part of the

RADWIN 2000 trunks with WinLink 1000

Go To Market Present the capability to Cellular Operators

7

MHS Spec

Supported in RADWIN 2000 by software upgrade to the install base

TDM service cut-over from the primary to the secondary link is completely automatic, less than 50 ms

Automatic restore to primary link as soon as it becomes available

Supports up to 16 TDM services for RADWIN 2000 and 4 TDM services for WinLink 1000

HSS is used between the links Install both sites with HSS cables for additional protection

Ethernet services No Ethernet 1+1 Ethernet traffic is always “on” on both links, while the TDM service is

running only on one link Each link carries different Ethernet traffic

8

Diversity

Antenna diversity Uses two antennas

Each antenna experiences a different interference environment

The system chooses the best received signal providing enhanced robustness

Antenna diversity requires antenna separation, possible by two methods: Polarization Diversity - combines a pair of antennas with orthogonal polarizations

Spatial Diversity - employs antennas that are physically separated from one another

DiversityCapacity 25 Mbps

MIMOCapacity 50 Mbps

9

Diversity – Receive Combining

10

Diversity – When to Use

MIMO Use MIMO Mode to get the highest capacity, up to 50 Mbps full duplex

Use MIMO when the air conditions are similar between the antennas

Use Diversity instead of MIMO in the following cases: When the system cannot operate in MIMO Mode due to link conditions

When you get higher capacity in Diversity Mode than in MIMO Mode

Note that Diversity Mode requires understanding of the nature of interference and of the correct solution to deploy. Advise PS.

Remember that the capacity in Diversity is ½ than that of MIMO

11

Spectrum View

An RF survey tool Support link installation before

service activation

Activated by the installer

Helps selecting the best channel during installation

Supports quick and easy installation

12

Spectrum View – Display Information

Spectral measurement for each of the 4 receivers that make the link

Spectral power measurements in 5MHz channel granularity

Current, average and maximum power per channel

Channels free from radars, with radars and barred (for DFS bands)

Scanned and un-scanned channels

Channels selected for ACS

Current operational channel

Time stamp of the last spectrum scan

Zoom, selective view of antennas and sites and detail level

13

Spectrum View – Tool Capabilities

Save and restore – save the spectral information and also view retrieved spectral information from historical spectrum scans

Diagnostics - the Spectrum View information is logged as part of the Diagnostics Information to improve link and system diagnostics and remote support. It can be retrieved from the RADWIN Manager menu with Help Get Diagnostic Information

Management Integration - Spectrum view information is supported in RADWIN’s MIB and can be used by external Network Management applications

Designed for Unlicensed Spectrum – the spectrum measurement algorithms are designed to show accurate information while accommodating with variances in frequency, temperature and interference power and overcoming anomalies that tend to occur in high interference environments

Scanning Time – ~10 seconds for an entire band scan. It is recommended to scan for a few minutes for accurate results.

14

RADWIN 2000 products

15

4.8 GHz Radio

Motivation 4.8 GHz is a licensed band It is used mainly for security applications being part of the 4.4 – 4.9 GHz spectrum It is used also for broadband applications

Product description The only RADWIN product that supports the 4.8 GHz band Connectorized only Supported bands:

5.9 GHz Universal 5.8 GHz FCC/IC, 5.8 GHz MII China, 5.8 GHz WPC India 5.4 GHz FCC, 5.4 GHz IC, 5.4 GHz Universal 5.3 GHz FCC/IC, 5.3 GHz Universal 4.9 GHz FCC, 4.9 GHz Universal 4.8 GHz Universal (factory default) 2.4 GHz FCC/IC

4.8 GHz Universal band: 4.800 to 4.900 GHz (occupied spectrum. Center frequencies 4.810 to 4.890 GHz) Default channel 4.850 GHz Channel BW 20 MHz

Part number RW-2948-0250

16

Frequency5.8GHz FCC/IC

Integrated Ant.RW-2050-0150

5.8GHz FCC/IC ConnectorizedRW-2050-0250

2.4GHz FCC/IC Integrated Ant.RW-2020-0150

4.9GHz FCC Integrated Ant.RW-2049-0150

4.9GHz FCC ConnectorizedRW-2049-0250

5.9GHz Universal V V - V V

5.8GHz FCC/IC Factory Default Factory Default - V V

5.8GHz MII China V V - V V

5.8GHz WPC India V V - V V

5.4GHz FCC V V - V V

5.4GHz IC V V - V V

5.4GHz Universal V V - V V

5.3GHz FCC/IC V V - V V

5.3GHz Universal V V - V V

4.9GHz FCC - - - Factory Default Factory Default

4.9GHz Universal - - - V V

2.4GHz FCC/IC - V Factory Default - V

RADWIN 2000 FCC Products

17

Frequency5.8GHz WPC

Integrated Ant.RW-2450-0150

5.8GHz WPC ConnectorizedRW-2450-0250

2.4GHz FCC/IC Integrated Ant.RW-2020-0150

5.8GHz WPC India Factory Default Factory Default -

2.4GHz FCC/IC - V Factory Default

RADWIN 2000 Products for India

18

Frequency5.X GHz ETSI

Integrated Ant.RW-2250-0150

5.XGHz ETSI Connectorized

RW-2250-0250

5.8GHz ETSI V V

5.4GHz ETSI Factory Default Factory Default

5.3GHz ETSI V V

RADWIN 2000 Products for ETSI

19

Frequency4.8GHz

ConnectorizedRW-2948-0250

6.0GHz Universal -

5.9GHz Universal V

5.8GHz FCC/IC V

5.8GHz MII China V

5.8GHz WPC India V

5.4GHz FCC V

5.4GHz IC V

5.4GHz Universal V

5.3GHz FCC/IC V

5.3GHz Universal V

4.9GHz FCC V

4.9GHz Universal V

4.8GHz Universal Factory Default

2.4GHz FCC/IC -

RADWIN 2000 Additional Products

20

RADWIN 2000 Antennas

Part Number Description

RW-9611-4958 Flat panel, 1.2ft, dual polarization, gain 23dBi, 5.140-6.090 GHz

RW-9721-5158 Dish, 2ft, dual polarization, gain 28dBi, 5.250-6.000 GHz

RW-9612-5001 Flat panel, 1.2ft, dual polarization, gain 23dBi, 4.900-5.800 GHz

RW-9612-4001 Flat panel, 1.2ft, dual polarization, gain 22dBi, 4.4-5.1 GHz

RW-9612-2427 Flat panel, 1.2ft, dual polarization, gain 19dBi, 2.400-2.700 GHz

21

WinLink 1000 Products

22

WinLink 1000 New Products

Product Freq. Channel Tx Power Region Application

WL1000-ODU-VS/F24/FCC/CMB/EXT 2.312 – 2.482 GHz 18dBm Worldwide

Video Surveillance

WL1000-ODU-VS/F24/FCC/CMB/INT 2.312 – 2.482 GHz 18dBm Worldwide

WL1000-ODU-VS/F54/ETSI/CMB/EXT 5.140 – 5.880 GHz 8dBm Europe

WL1000-ODU-VS/F54/ETSI/CMB/INT 5.140 – 5.880 GHz 8dBm Europe

WL1000-ODU-VS/F58/FCC/CMB/EXT 4.940 – 5.950 GHz 16dBm Worldwide

WL1000-ODU-VS/F58/FCC/CMB/INT 4.940 – 5.950 GHz 16dBm Worldwide

WL1000-ODU-HE/F27/HP/EXT 2.700 – 2.900 GHz

23dBmIndia Access, Backhaul

External FP Antenna for 2.7-2.9GHz 17dBi

WL1000-ODU-HE/F24/HP/EXT 2.312 – 2.482 GHz 16dBm Russia and Worldwide

Access, BackhaulWL1000-ODU-HE/F24/HP/INT 2.312 – 2.482 GHz 16dBm

DC-PoE 12VDC-24VDC Worldwide Solar Power Applications

BDU AC Power Adaptor Worldwide MPtP

23

WinLink 1000 Modified Products

Frequency Range Center Frequency Resolution

Product Previous New Previous New Tx Power

WL1000-ODU/F54/HP/INT

5.500 – 5.700 GHz 5.475 – 5.720 GHz 20 MHz 5 MHz

18dBm

WL1000-ODU/F54/HP/EXT 18dBm

WL1000-ODU/F54/HP/INT/PoE 18dBm

WL1000-ODU/F54/HP/EXT/PoE 18dBm

WL1000-ODU-HE/F54/HP/INT 23dBm

WL1000-ODU-HE/F54/HP/EXT 23dBm

24

WinLink 1000 VS - Overview

Video surveillance application requires: High Capacity - Mega-Pixel cameras consuming high bandwidth High robustness and reliability Real Time - Focused alerts, maximum information for manned patrols Mission-critical - No tolerance for system downtime or quality degradation

New WinLink 1000 VS Family - for Video Surveillance applications Asymmetric Ethernet throughput 2/5Mbps, depends on product & distance Up to 20Km distance 5, 10 & 20MHz channel BW Multi-band support for all products HSS support for all products

25

Video Surveillance - Project Types

City surveillance (low scale)

Enterprise

Campuses

Plants

Gas stations

ATMs

25

Low-end High-end

City surveillance (high scale)

Border control

Railways security

Gas/Oil pipeline security

Facilities

Airports, seaports

Traffic surveillance

26

WinLink 1000 VS - Bands

BandCon.

Int.

VS/F58/FCC/CMB/EXT

VS/F58/FCC/CMB/INT

VS/F54/ETSI/CMB/EXT

VS/F54/ETSI/CMB/INT

VS/F24/FCC/CMB/EXT

VS/F24/FCC/CMB/INT

5.9 GHz Universal V

5.8 GHz FCC/IC V

5.8 GHz WPC India V

5.4 GHz Universal V

5.3 GHz Universal V

4.9 GHz Universal V

5.8 GHz ETSI V

5.4 GHz ETSI V

2.4 GHz FCC/IC V

2.4 GHz Universal V

= Factory Default Band

27

Base Distribution Unit (BDU)

28

Now GA Release 6.2 replaces Release 6.1 beta

New enhancement Each of the 8 ports can be set to either ODU or 802.3af PoE

BDU

29

Applications

BDU is part of RADWIN’s Multiple Point-to-Point (MPtP) architecture, providing a complete Hub solution for communication networks.

Typical applications include: Corporate Access by Service Providers, WiFi/WiMAX Backhaul and Video Surveillance projects.

Uplink - Ethernet / TDM

30

Thank You

www.radwin.com