quick manual - roland c330

2
Quick Manual  This manual explains the most important operations. Refer to the owner’s manual for details on these and other operations. Volume of the Satellite Speakers Master Volume Reverberation 3. Adjust the sound. 2. Select a stop (sound). 1. Turn on the power. When the power is turned on, the main screen will appear in the display. Immediately after the power is turned on, no stops are selected, meaning that the keyboard will not produce sound. Playin g the Organ Press the upper part of the tablet to turn off the stop. Press the lower part of the tablet to select the stop. Pedalboard Stop Lower Manual Stop Upper Manual Stop Let’s start by performing with a organ sound. By pressing a tablet, you can choose between variations of the sound f or the selected stop. Selecting a Sound Variation (Voice Palette) 1. Press a tablet. Press the lower part 2. The voice palette screen will appear. Selected stop name Currently selected variation Pedalboard Stop Lower Manual Stop Upper Manual Stop 3. Select a variation.  Turn Choose from four variations, VP0 through VP3. If the Voice Palette screen does not appear, press the [Value/Exit Menu] knob several times to access the main screen (which shows the memory bank), and then proceed as above. Main Screen Shortcuts By using these shortcuts you can directly access a desired screen without going through a menu screen. Settings for the USER/MIDI Couplers (USER/MIDI Coupler screen) Setting the playing or recording (Song Recorder screen) Press [SET] piston While holding and following operation Listening to the demo songs (Demo screen) Setting the melody coupler (Console screen) [PLAY/P AUSE]pisto n [MEL] piston Adjusting the external devices sound (Audio screen) Setting the bass coupler (Console screen) [Master Volume] knob [BASS] piston Setting the reverb (Room Modeling screen) Changing the tuning or pitch (Pitch/Tuning screen) [Reverb] knob Setting the expression pedal (Exp. Pedal screen) Setting the tremulant (Tremulant screen) [TREMULANT] tablet Storing your settings (Custmize) [0] piston Press Press Press Press Press  Turn Turn Press Operate Copyright © 2010 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Roland is a registered trademark of Roland Corporation in the United States and/or other countries.

Upload: alexandre-goncalves-andrelino

Post on 05-Apr-2018

263 views

Category:

Documents


0 download

TRANSCRIPT

8/2/2019 Quick Manual - Roland C330

http://slidepdf.com/reader/full/quick-manual-roland-c330 1/2

Quick Manual This manual explains the most importantoperations. Refer to the owner’s manualfor details on these and other operations.

Volume of theSatellite Speakers

Master Volume Reverberation

3. Adjust the sound.2. Select a stop (sound).1. Turn on the power.When the power is turned on,the main screen will appear inthe display.

Immediately after the power isturned on, no stops are selected,meaning that the keyboard willnot produce sound.

Playing the Organ

Press the upper part of the

tablet to turn off the stop.

Press the lower part of thetablet to select the stop.

Pedalboard Stop Lower Manual Stop Upper Manual Stop

Let’s start by performing with a organ sound.

By pressing a tablet, you can choose between variations of the sound f or the selected stop.

Selecting a Sound Variation (Voice Palette)

1. Press a tablet.

Press the lower part

2. The voice palette screen will appear.

Selected stop name

Currently selectedvariation

Pedalboard Stop Lower Manual Stop Upper Manual Stop

3. Select a variation.

Turn

Choose from four variations, VP0through VP3.

If the Voice Palette screen does not appear,press the [Value/Exit Menu] knob several timesto access the main screen (which shows thememory bank), and then proceed as above.

Main Screen

ShortcutsBy using these shortcuts you can directly access a desired screen without going through a menu screen.

Settings for theUSER/MIDI Couplers(USER/MIDI Coupler screen)

Setting the playing orrecording(Song Recorder screen)

Press

[SET] piston

While holding and following operation

Listening to the demo songs(Demo screen)

Setting the melody coupler(Console screen)

[PLAY/PAUSE] pisto n

[MEL] piston

Adjusting the external devices sound(Audio screen)

Setting the bass coupler(Console screen)

[Master Volume] knob

[BASS] piston

Setting the reverb(Room Modeling screen)

Changing the tuning or pitch(Pitch/Tuning screen)

[Reverb] knob

Setting the expression pedal(Exp. Pedal screen)

Setting the tremulant(Tremulant screen)

[TREMULANT] tablet

Storing your settings(Custmize)

[0] piston

Press

Press

PressPress

Press

Turn Turn

Press

Operate

Copyright © 2010 ROLAND CORPORATIONAll rights reserved. No part of this publication may be reproduced in any form without the writtenpermission of ROLAND CORPORATION.Roland is a registered trademark of Roland Corporation in the United States and/or other countries.

8/2/2019 Quick Manual - Roland C330

http://slidepdf.com/reader/full/quick-manual-roland-c330 2/2

Storing Your Favorite SettingsAll settings for the upper manual, lower manual, and pedalboard can be stored together in one of the general pistons — .

Storing Recalling Turning the settings off

The piston sets the organ to the condition in which alltablets and couplers are cancelled so that no sounds areselected. This piston is also called the “cancel piston.”

On the C-380, you can store only the eachmanual settings to a “division memory piston.”

The state of the general memory [1]–[5]pistons can be stored as a “memory bank.”

While holding Press Press Press

Making Settings in the MenusHeres how to make settings using the menus.

1. Access the menu. 2. Select the item. 3. Enter the item. 4. Change the setting.

5. Put the settinginto effect.

If a Yes/No confirmationscreen appears

• Cancel the setting.• Return to the previous menu.

Press Turn TurnPress

Press Press

Menu List * For details, refer to the Owner’s Manual.

Set tin g cate gor y Conte nts o f t he categ or y Detai le d i tems

• Recording settings• Play back settings• Saving, deleting, and copying song data

• Save/load the contents• Format the USB Memory• Factory Reset

• Display contrast• V-LINK setting• MEL and BASS coupler settings

• Expression pedal settings

• Reverb settings

• External device settings

• MIDI settings

• Listen to demo songs

• Tremulant settings

• USER coupler settings• MIDI coupler settings

• Settings for pitch and Temperament

1 Demo

2 Pitch/Tuning

3 Song Recorder

4 Room Modeling

5 USER/MIDI Coupler

GroupSong TempoSatellite VR

Pitch Temperament Tuning Transpose

Song TempoMeasure

Play ModeDevision MuteMetronome VolumeBeatSave SongDelete SongCopy Song

Room TypeWall Type

* Details of the available items will depend on the Source/MIDI CHsetting. For details, refer to the Owner’s Manual.

Display ContrastV-LINK Bass SplitMel Split

DepthRate

MAN-I/PedalMAN-IIShutterKick SW RKick SW LExp.Mode

Aux In VolumeAux In ReverbLine Out Gain

Local Tone Name Tx Piston

Save Memory Bank Load Memory Bank Copy Memory Bank Delete Memory Bank Save Voice SetupLoad Voice SetupDelete Voice SetupFormat USB MemoryFactory Reset

6 Console

7 Tremulant

8 Exp. Pedal

9 Audio

10 MIDI

11 Save/Load (USB)