EDISION OS mini

EDISION OS mini

EDISION OS mini

EDISION OS mini

Quick Guide

++

EDISION OS mini - DVB/S2 TunerEDISION OS mini - DVB/S2 Tuner + DVB/S2 TunerEDISION OS mini - DVB/S2 Tuner + DVB/C/T2EDISION OS mini - DVB/C/T2- MPEG-4, H.264 & MPEG-2 Compliant- Dual Core 750 MHz (2000 DMIPS) BCM7362 Processor - 512 MB DDR3 DRAM / 512 MB NAND Flash Memory / 4MB Serial NOR Flash Memory (for boot loader)- Linux Operating System- 10/100 Mbps Full Duplex Ethernet Interface- 1x Smart Card Reader - 2x USB 2.0 Port (1x in der Front & 1x Rear)- DV-OUT & Component Line Out- unlimited Channel Memory- Super Sensitive Tuner - S/PDIF Output for Digital Audio and Dolby AC-3 Bit Stream Output - Firmware/ Software Upgrade: Through (Ethernet, USB Memory Stick) - multi-Language OSD Menus - user Friendly EPG (Electronic Program Guide) - external Power Supply- very low standby power consumption (<0.5W)

ACCESSORIES

Please check that the following contents are enclosed :

Power Supply

2 BATTERIES

Remote control unit

Quick Start Guide

3.5mm to DB9 Serial Cable

3.5mm to RCA Cable

VIEWS

Front view:1. Power Button Switch between operation and standby modes2. Display current menu information and channel name etc.3. USB Connect to the External HDD or USB storage with USB cable. (Max. 500mA)4. Smart card reader. To insert smart card

3

1 2

4

Rear View

1. LNB1 INPUT 1st satellite tuner input from the LNB on a dish antenna. Turn the receiver OFF first before connecting2. Loop Out. Only channels with the same Polarisation (horizontal / vertical) and in the same Frequency band are considered (low / high)3. DVB-T2 / DVB-C Line IN4. DVB-T2 / DVB-C Antennas Line OUT. Loop Out5. Line OUT 3.5mm to RCA Cable6. DV-OUT7. 3.5mm to DB9 Serial Cable8. S/PDIF Line OUT9. Ethernet Communication port via HTTP, FTP, NFS, Telnet and Samba to access your Hard Drive or to upload channel lists. This is also used to update Edision OS mini + software10. USB Connect to the External HDD or USB storage with USB cable (Max. 500mA)11. External Power Supply Connect the power Supply (12V / 3.5A)12. Power Switch. Turn AC Power On/Off

Edision OS mini DVB-S2

Edision OS mini DVB-S2 + DVB-S2

Edision OS mini DVB-S2 + DVB-C/T2

Edision OS mini DVB-C/T2

1

1

13

3

1

4

4

2

5

5

5

5

6

6

6

6

7

7

7

7

8

8

8

8

9

9

9

9

10

10

10

10

11

11

11

11

12

12

12

12

Installation

1. Please refer to the Safety Instruction before powering on the device.

2. Connect Edision OS mini to your TV set using HDMI cable or a RCA cable.

3. Connect the coaxial cable (from the satellite dish) to the LNB INPUT of Edision OS mini, alternatively the aerial cable of your cable network operator or of your DVB T Antenna to the Antenna In Input. 4. Power on the Edision OS mini.5. After booting up, Initial setup menu comes up for the installation according to your TV settings and

Antenna settings.

Use an HDMI or Component cable in order to view HD.

REMOTE CONTROL UNIT

PowerSwitches between operation and standby

< (PREV)Return to the previous channel/service or move to the end of the Service List or the Play List

HelpThis provides users with a quick guide of using Edision OS mini

MenuOpen main menu & select sub menu using by navigation buttons

EXITClose and return to the previous menu and screen

RADIO - TVSwitch to TV mode.Switch to Radio mode

COLOR BUTTONSActivates certain menu functions. Usage instructions are shown in each OSD menu

AudioSelect an audio track and a sound mode

PLAYStarts timeshift if available

RECActivates immediately recording-option

NUMERIC KEY (0-9)Control the numerical operation and change the Channel/Service number directly

> (NEXT)Go to the next channel/service or move to the beginning of the Service List or the Play List

TIMERStart timer function

INFODisplays the Electronic Program Guide (EPG) information if provided

EPGDisplays the Electronic Program Guide (EPG) information if provided

MuteMutes or unmutes the audio temporarily

TEXTSwitch between the teletext and TV modes

SUBTITLEDisplay the subtitle language list

SAFETY INSTRUCTIONS

DISPOSAL INSTRUCTIONS

Please read the safety instructions carefully before using the Edision OS mini. The manufacturer takes no responsibility for incorrect handling of the Edision OS mini. * For sufficient ventilation, leave enough space.* If unused for a prolonged amount of time, turn the power OFF. * Do not cover the Edision OS mini ventilation openings with items such as newpapers, tablecloths, curtains etc. * Do not expose the Edision OS mini to liquid, moisture, direct sunlight and extreme weather. * Do not place open flame sources, such as lighted candles, near or on the Edision OS mini. * Do not place any containers with liquid, such as vases, on the Edision OS mini. * Do not connect or modify cables while the Edision OS mini is connected to the power. * Do not remove the cover. Risk of electric shock! * Do not touch the Edision OS mini with wet hands. Risk of electric shock! * Do not put any metal items into the slots or ventilation openings. * Please disconnect your Edision OS mini from the main power during thunder or heavy storms. * Disconnect the main power cable if the power cord is damaged. * Cleaning: Disconnect the main power cord before cleaning the cover. Use a slightly damp cloth without cleaning agents. * Connect the Edision OS mini only to suitable sockets. Do not allow overloads to occur.

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

WARNING! * Modifications and changes to the Edision OS mini lead to loss of warranty * Incorrect software installation leads to loss of warranty. * This instruction might be modified without prior notice.