publications - velagapudi ramakrishna siddhartha ... · pdf filepublications international ......
TRANSCRIPT
PUBLICATIONS
International Journals:
1) Sri N. Vijaya Kumar ,MMM Sarcar, Ramji Koona “Investigation of Dielectric properties of
Industrial waste reinforced particulate polymer composites” in Advances in Material Science and
Engineering, volume 2014, Article ID 319741.Impact Factor 0.5000 (Thomson Routers).
2) T. D. Mani Deepika, N. Pavani, A.L.Aishwarya and V. Balakrishna Murthy, “Tailoring of
Dimentionally Stable Composites”, International Journal of Research in Mechanical Engineering
and Technology, ISSN:2249-5762, Vol.4, Issue Spl-1, Nov 2013-April-2014, pp.135-137. Global
Impact Factor:0.478.
3) Sri K.Ramanaiah, Dr.A.V.Ratna Prasad, Sri K.Hema Chandra Reddy “Fire Properties of elephant
grass fiber and glass fiber reinforced polyster composites” Journal of Applied Mechanics and
Materials, Vol 592-594, pp 380-384,2014(Scopus).
4) Dr.N.Ravi Kumar, Ch.Ranga Rao, Sri Raghava Rao.B, Sri K.Srinivas “Mechanical Properties of
Vakka fiber reinforced polypropylene composites” International Journal of Innovative research in
Science, Engineering and Technology, IJIRSET, Volume 3, Special Issue 3, March 2014,ISSN
2347-6710.
5) Sri Ch Hari Krishna, M J Davidson, Dr.Nagaraju Ch, Ramesh Kumar P “Effect of lubrication in
Cold Upsetting Using Experimental and Finite Element Modeling” ASTM-Journal of Testing and
Evaluation,ASTM International(Article in Press), vol.43/No.1/ DOI:
10.1520/JTE20130218,Impact Factor=0.349.
6) T. D. Mani Deepika, N. Pavani, A.L.Aishwarya and V. Balakrishna Murthy “Tailoring of
Dimentionally Stable Composites” International Journal of Research in Mechanical Engineering
and Technology, ISSN:2249-5762, Vol.4, Issue Spl-1, Nov 2013-April-2014, pp.135-137.
7) Dr.A. V. Ratna Prasad, Dr. K. Mohan Rao, A.V.S.S.K.S.Gupta, “Experimental
Investigation on Mechanical Properties of Golden Cane Fiber Reinforced Polyester
Composites” International Journal of Polymer Analysis and Characterization (Taylor and
Francis) 18:1,30-39.
8) K.Srividya, Dr.V.Balakrishna Murthy, M.R.S.Satyanarayana, “Effect of Boundary
conditions on free Vibration Analysis of Thick Fiber Reinforced Plastic Skew Laminate
with Circular Cutout” International Journal of Engineering Sciences and Research
Technology(IJESRT) Vol.3,June2014,pp-6.
9) Sri G.Dillibabu, Dr.K.Sivaji Babu, Sri B.Uma Maheshwar gowd, “Determination of
Delamination and Surface Roughness for Machined Fiber Reinforced Plastics using
Machine Vision”, Journal of mechanical and Industrial Engineering Research, Vol. 3,
No.1,pp.66-68,2014.
10) Sri P.Sateesh kumar Reddy, Sri Kancharla Bhargavi, Dr.Ch. Nagaraju, “Tailoring of
Composite Cantilever beam for Maximum Stiffness and Minimum Weight” IOSR
Journal of Mechanical and Civil Engineering, Vol.9(5), 2013, pp.65-73.
11) Sri K.Srinivas, Sri N.Rama Krishna, Dr.B.Balu Naik, Dr.K.Kalyani radha, “ Performance
and emission analysis of Waste Vegetable oil and it’s blends with diesel and additive”,
International Journal of engineering Research and Applications, ISSN:2248-9622,Vol.3,
Issue 6, 2013, pp 473-478.
International conferences:
1) Sri N.Vijay Kumar, MMM Sarcar, Ramji Koona “Investigation of Mechanical properties of slag
Reinforced particulate Polymer composites” in International Conference on Mechanical
Engineering: Emerging Trends for Sustainability(ICMEETS-2014) at Maulana Azad National
Institute of Technology, Bhopal during 29th -31
st January 2014.ISBN :978-93-83083-45-9.
2) Sri N.Vijay Kumar, MMM Sarcar, Ramji Koona “Evaluation of wear properties of Industrial
waste (Flue Dust) Reinforced Polypropylene Composites” in International Conference on
Metallurgical and Materials processes, products and Applications at OP JINDAL Institute of
Technology, Raigarh during 8th -10
th January 2014.
3) Sri N. Vijaya Kumar, “Evaluation of wear properties of industrial waste(slag) reinforced
polyster composites”, International conference on materials and processing (ICMP 2014)
held om june 9-14, 2014 in Detroit, USA.
4) Sri Hari krishna Ch, Davidson M.J, Dr. Nagaraju Ch, "Utilization of Workability Criteria
to Improve the Formability of the Deformed Truncated Billets in Simple Upsetting",
International Conference on Advances in Manufacturing and Materials Engineering,
AMME 2014, 27/MAR 2014, NIT Surathkal.
5) Dr.N.Ravi Kumar, Ch.Ranga Rao, Sri Prof.Raghava Rao.B, Sri K.Srinivas, “Mechanical
Properties of Vakka fiber reinforced polypropylene composites”, International
Conference on Innovations in Engineering and Technology, ICIET’14, KLN College of
Engineering, Madurai, 22-23 March 2014.ISSN 2319-8753.
6) Dr.A.V.Ratna Prasad, Sri K.Ramanaiah, Dr.K.Mohana Rao “Influence of nano clay on
the Mechanical performance of Banana(EFB) fiber reinforced polyster Nano
Composites” Third International Conference on Recycling and Re use of materials
(ICRM 2014), organised by Mahatma Gandhi University, Kottayam,kerala.(11th -13
th
April 2014).
7) Gunti Rajesh,Dr. Atluri V Ratna Prasad, “Tensile properties of successive alkali Treated
short jute fiber reinforced PLA composites” International Conference on Advances in
Manufacturing and Materials Engineering (ICAMME 2014), NIT, Suratkhal, 27th -29
th
March,2014.
8) Sri K.Ramanaiah, Dr.A.V.Ratna Prasad, Sri K.Hema Chandra Reddy “Flamability of
unsaturated polyester resin and composites with natural Synthetic fiber” Third
International Conference on Recycling and Re use of materials (ICRM 2014), organised
by Mahatma Gandhi University, Kottayam, Kerala.(11th -13
th April 2014).
9) Sri G.Dillibabu, Dr.K.Sivaji Babu, B.Uma Maheswar Gowd, “Evaluation of surface
roughness of Machined Fiber Reinforced Composites Plastics using Image Processing”
International Conference on Advancements in Automation and control (ICAAC 2014),
Syed Ammal Engineering College, Ramanathapuram, during 11th -12
th April 2014.
10) Sri G.Dilli Babu, “Determination of Delamination and Tensile Strength of Drilled
Natural Fiber Reinforced Composites” in International Mechanical Engineering Congress
2014,conducted by NIT Tiruchirapalli, during 13-15, June 2014.
11) Sri K.Ramanaiah, Dr.A.V.Ratna Prasad, Sri K.Hema Chandra Reddy “Fire properties of
elephant grass fiber and glass Fiber Reinforced Polyster Composites” in International
Mechanical Engineering Congress 2014,conducted by NIT Tiruchirapalli, during 13-15,
June 2014.
12) Dr.G. Sambasiva Rao, P. Prasanthi, B. Umamaheswar Gowd and Dr.V. Balakrishna Murthy
“Analysis of Buck Minster Fullerene Reinforced Composites- Influence of homogenized wall
thickness” Mechanics of Composites (MECHCOMP2014) being organized by Stony Brook
University, USA during 8-12 June 2014.
13) A. Srihari Prasad Ramana K. V., Dr. Balakrishna Murthy.V and Dr.Sambasiva Rao G.
“Prediction of Elastic Properties of Sisal Fiber Using Back-Track Approach” Mechanics of
Composites (MECHCOMP2014) being organized by Stony Brook University, USA during 8-12
June 2014.
14) J. Suresh Kumar, R. Venkata Kiran Kumar and Dr.V. Balakrishna Murthy “Fracture Analysis of
SLJ in Cross-ply and Angle-ply FRP Composite Laminates” Mechanics of Composites
(MECHCOMP2014) being organized by Stony Brook University, USA during 8-12 June 2014.
15) B. Umamaheswar Gowd, S. Rambabu and Dr.V. Balakrishna Murthy “Effect of Mismatch in
Young’s Modulus and Thermal Conductivity on Thermal Stresses at Fiber-Matrix Interface”
Mechanics of Composites (MECHCOMP2014) being organized by Stony Brook University, USA
during 8-12 June 2014.
16) Dr. Nagaraju Ch, Sri Harikrishna Ch, Sri Koteswara Rao U, “vibration Analysis of Structural
Element by Employing Spectrum Analyzer”, ICEMP-2014,Csir-IMMT-Bhuvaneshwar, Feb 26th
-28th 2014, pp 171-173.
17) Dr. Nagaraju Ch, Sri Harikrishna Ch, Sri Mallikharjuna Rao A, Harikrishna T, “Application of
Signature Analysis for the Structural Health Monitoring of a rotor” , IC MEETS -2014, MANIT-
Bhopal, Jan 29th-31st, 2014, Vol.(2), pp 613-618.
18) Sri A.Mallikharjuna Rao, Dr.B.S.K.S.Siva Rao and Dr.K.Ramji, “Experimental investigatons of
Autonomous Mobile(AMR) against obstacles, using Artificial Intelligent Techniques”,
International Conference organised at IIT Indore during 16th -18th , Dec-2013.
National conferences:
1) Sri K.Srinivasa Rao, Sri G. Sridhar Babu, Sri R.Venkata Kiran Kumar, “Theoretical
Evaluation of Thermo Physical Properties of Nano Fluids” National Conference on
Nanotechnology in Chemical and alloyed industries (NTCAI-2014), Organised by
Department of Chemical Engineering, Bapatla Engineering college, Bapatla, from 7th-8th
March 2014.
2) Sri B.Supraja Reddy , Sri M.Suma Latha, “Investigation of Failure strength of Curved
plate Double end welded joint Using Finite Element Analysis” National Conference on
Recent Advances in Mechanical Engineering NCRAME’14, organized by Department of
Mechanical Engineering, University College of Engineering, Vizianagaram, JNTU
Kakinada under UGC XII Plan on 22nd
March 2014.
3) Sri V.Venu Madhav, P.Phani Prasanthi, Dr.V.Bala Krishna Murthy, “Effect of
Delimination Size around a square sutout on Fracture analysis of FRP laminates”
National Conference on Recent Advances in Mechanical Engineering NCRAME’14,
organized by Department of Mechanical Engineering, University College of Engineering,
Vizianagaram, JNTU Kakinada under UGC XII Plan on 22nd
March 2014.
4) P. Prasanthi, A. L. Aishwarya and Dr. V. Balakrishna Murthy, “Mechanical
Characterization of Nano Composites” National Conference on Nano Technology in
Chemical and Allied Industries (NTCAI-2014), Organized by Department of Chemical
Engineering, Bapatla Engineering College, Bapatla, Andhra Pradesh during 7th -8
th March
2014.
5) Sri B. Srinivasa Rao, Ch. Praveen Kumar and Dr.V. Balakrishna Murthy, “Prediction of
Critical Load and Critical Crack length of a four Layered Symmetric angle-ply Laminate
under Transverse Pressure Load” National Conference on Recent Advances in
Mechanical Engineering (NCRAME’14), organized by Department of Mechanical
Engineering, University College of Engineering, Vizianagaram, JNTU Kakinada under
UGC XII Plan on 22nd
March 2014, pp. 265-270.
6) Sri J Naga Malleswara Rao, A. Chenna Kesava Reddy, P.V. Rama Rao, “Experimental
Investigation of the influence of burning tool passes on surface roughness of copper
specimen” National Conference on Recent Advances in Mechanical Engineering
(NCRAME’14), organized by Department of Mechanical Engineering, University
College of Engineering, Vizianagaram, JNTU Kakinada under UGC XII Plan on 22nd
March 2014.
7) Sri J Naga Malleswara Rao, P.Rakesh, A.Chennakesava Reddy, “Experimental
Techniques to find out the best orientation to minimise the support material required in
rapid proto typing” National Conference on Recent Advances in Mechanical Engineering
(NCRAME’14), organized by Department of Mechanical Engineering, University
College of Engineering, Vizianagaram, JNTU Kakinada under UGC XII Plan on 22nd
March 2014.
8) Sri J.N.Malleswara Rao, Dr.A.Chennakesava Reddy, Sri M.Sumalatha, “Experimental
Investigation of the influence of Roller Burnishing Tool Passes on Surface Roughness
and hardness of Brass Specimens” National Conference on Research issues and recent
trends in Mechanical Engineering (NCRRME 2014) at SIR C R Reddy College of
Engineering, Eluru on 24th -25
th January 2014.
9) Dr. V. Balakrishna Murthy, “Interlaminar Stresses due to Temperature in Laminated FRP
Composites” Invited Talk, National Conference on Research issues and Recent Trends in
Mechanical Engineering (NCRRME-2014), Organized by Mecanical Engineering
Department, Sir CRR College of Engineering, Eluru, Andhra Pradesh during 24th-25th
January 2014.
10) A.L.Aishwarya, A. Eswara Kumar and Dr.V. Balakrishna Murthy, “Free Vibration
Analysis of Composite Leaf Springs” National Conference on Research issues and
Recent Trends in Mechanical Engineering (NCRRME-2014), Organized by Mecanical
Engineering Department, Sir CRR College of Engineering, Eluru, Andhra Pradesh during
24th-25th January 2014, pp.36.
11) T.D. Mani Deepika, N. Pavani, A.L. Aishwarya and Dr.V. Balakrishna Murthy,
“Tailoring of Dimentionally Stable Composites” National Conference on Research issues
and Recent Trends in Mechanical Engineering (NCRRME-2014), Organized by
Mecanical Engineering Department, Sir CRR College of Engineering, Eluru, Andhra
Pradesh during 24th-25th January 2014, pp.37.
12) Sri J.Naga Malleswara Rao,Sri P.Rakesh, Dr. A.Chennakesava Reddy, “Evaluation of the
best orientation of work piece to minimize the requirement of support material in fused
deposition modelling process”, National Conference on recent advancements in
Mechanical Engineering 2014(RAME - 2014) on April 2nd 2014.
13) Sri J.Naga Malleswara Rao, Dr. A.Chennakesava Reddy, Dr. P.V.Rama Rao,
“Investigation of Variation of surface roughness on Aluminium Specimens by Roller
Burnishing Process” , National Conference on recent advancements in Mechanical
Engineering 2014(RAME - 2014) on April 2nd 2014.
14) Sri J.Naga Malleswara Rao, Dr. A.Chennakesava Reddy, Dr. P.V.Rama Rao, Sri
M.Sumalatha, “Experimental Investigation of the Influence of Roller Burnishing on
Surface Roughness and Hardness of Brass Specimens” , National conference on
Innovations in Engineering and technology (NCIET-2013), organised by Gudlavalleru
Engineering College from December 27th -28th 2013,ISBN: 978-1-4276-5484-7.
WORKSHOPS ATTENDED
1) Dr.P.Srinivas, Sri J.N. Malleswara Rao, Sri A.Mallikharjuna Rao, Sri M.Sumalatha attended a
National workshop on “Creative Design and Rapid Product Development Technologies”
organized by the Department of Mechanical Engineering, NIT Warangal, Warangal during 29th
to 31st January 2014.
2) Sri J.N. Malleswara Rao, attended a National workshop on “Advances in Manufacturing
processes” organized by the Department of Mechanical Engineering, JNTU Vizianagaram,
during 28th febraury to 1st march 2014.
3) Sri A. Sreenivasulu, attended a National Seminar on “Renewable Energy sources” organized by
the Department of Mechanical Engineering, JNTU Anantapur, on 8th March 2014.
4) Prof.B.Raghava Rao , Dr.Ch Nagaraju , Dr. P.S.Srinisas, attended a Two National Seminar on
“Enhancing quality of Technical Education and research” organized by the Department of
Mechanical Engineering, IIT Hyderabad, during 7th -8
th March, 2014.
5) Dr. N. Ravi Kumar, attended one week Faculty development program on “Enhancing quality of
Technical Education and research” organized by the Department of Mechanical Engineering, S
G G S Institute of Science & Technology , Naded, during 5th-9
th march 2014.
6) Sri K.Srinivasa Rao, Sri G. Srivalli, Sri V.Anurupa attended a two day National Workshop on
“Research Methodology” during 11th -12
th April 2014 organised by the Department of
Mechanical Engineering, BITS Pilani.
7) Sri A.Phani Deepthi, Sri B.Kamala Priya attended one day workshop on “MATLAB
Programming” on 23rd
arch 2014 at IIT Madras, Chennai.
8) Sri Ch. Harikrishna, Dr. Ch. Naga Raju attended a short term course on “Essential Techniques
for research problems in materials and manufacturing” organised by NIT Warangal.
9) Sri V.V. Venu Madhav, Sri R. V. Kiran Kumar attended a two day National Workshop on
“Fatigue and Fracture Mechanics” during 24th 26
th April 2014 organised by M.S. Ramaiah
University of applied Scinces, Banglore.
10) Sri N. Vijaya Kumar attended a Training Program on “Training program on thin film synthesis
and charecterization Techniques” during 25th 26
th April 2014 organised by Sathyabhama
University, Chennai.
11) Sri J. Naga Malleswara Rao attended a National Seminar on “Indian Space Technology Present
and Future” on 1st May 2014 organised by BITS Pilani, Hyd.
12) Sri K.Ramanaiah attended two week Faculty Development Program on “Computational
methods for flow and heat transfer analysis-Applications of CFD Tools organised by
Mechanical Department , JNTU Anantapur College of Engineering , Ananthapuram during 10th
– 23rd march 2014.
13) Sri V.Sudheer Kumar attended a 3-week UGC sponsored summer/winter school/refresher
course held at University Grant Commission, JNTUH, Hyderabad during 19th May 2014 to 7
th
June 2014.
WORKSHOPS / SEMINARS / GUEST LECTURE/ FACULTY DEVELOPMENT
PROGRAM ORGANISED
1) Guest Lecture on “Role of Constitution for best Governance” Under TEQIP II by Sri J.P Gupta, IAS,
Commissioner of Transport, Government of Gujarat, on 9th May 2014.
2) One Week Faculty Development Program on “Effective teaching and assessment strategies” during
16th to 21st June 2014 organized by VR Siddhartha Engineering College, Kanuru, Vijayawada.
3) One day Interactive session on “Meet the Enterprenuership by Mr.Viswanath, Founder Director,
Time, Hyderabad and Mr. Subramanyam, Kumar pumps on 24th Feb 2014.
4) One day training Program on “MATLAB” Under TEQIP II by J. Prem kumar, Akademy of Design,
Bangalore, on 07th February 2014.
5) Guest Lecture on “Entrepreneurship initiatives” Under TEQIP II by Dr. Pradeep Racharla , Professor,
Woxsen School of Bussiness, Hyderabad on 24th January 2014.
AWARDS, RECOGNITIONS, REVIEWER-SHIPS AND
SPECIAL MEMBERSHIPS AWARDED
1) Dr.V.Balakrishna Murthy acted as keynote speaker at Sir CRR College of Engineering, Eluru,
Andhra Pradesh during 24th-25th January 2014.
2) Dr.A.V.Ratna Prasad, Professor and Head, Department of Mechanical Engineering, reviewer
research paper for the following Journals which are indexed in Scopus and having Impact Factor
by Thomson Reuters:
a) Materials Letter (Elsvier)
b) Indian Journal of Fibre and Textile Research, CSIR, New Delhi
c) Conferences: International Conference on Transformations in Engineering Education
(ICTIEE 2014) Hubli, Karnataka ,India During January 16th -18
th , 2014.
3) Dr.A.V.Ratna Prasad, Professor and Head, Department of Mechanical Engineering Department
acted as session chair at the Third International Conference on Recycling and Re use of materials
(ICRM 2014), organized by Mahatma Gandhi University, Kottayam, Kerala, India during 11th -
13th April 2014 association with Wroclaw University of Technology, Poland.
ONGOING SPONSORED RESEARCH PROJECTS
S.No Name(s) of the
coordinators
Title of the project and duration Sponsoring
agency
Amount of
the grant
1 Dr. V Rama Rao and
Dr. A. V. Ratna
Prasad
Design and development of manually
operated briquetting machine from
agricultural waste - 2 Years
NABARD 8.85 lakhs
2 Dr. A. V. Ratna
Prasad
Experimental investigation of agro waste
fiber-nano clay reinforced
composites –Mechanical & Thermal
properties - 3 years (2012)
UGC
(MRP)
New Delhi
11.76 lakhs
3 Dr. N Vijay Sai Experimental investigation on
preparation and properties of Copper
alloy - fly ash composites by powder
metallurgy - 2 years (2011)
AICTE
(RPS)
New Delhi
9.3 lakhs
4 Dr. C. Naga Raju Fault Diagnostics in Rotor Bearing
System - 2 Years (2011)
AICTE
(RPS), New Delhi
7.5 Lakhs
5 Dr. N. Ravi Kumar Design of composite
flex seal - 6months
DRDO 9 lakhs
6 Dr. V. B. K.
Murthy
Analysis & Optimisation of
Mechanical Hardware of INS
mounted on a bracket in a space
vehicle - 1 year
RCI,
HYD
5 lakhs
STUDENT PRIZES/PARTICIPATIONS
S.No Name of the student(s) Event with organizer details Prize won
1 Kondapalli Bharat Workshop on Design Simulation Analysis of
motor bike. In association certified by SGT-
International, Wiziq, Steinbichler-Germany,
Cadtech & Metawing Technologies Pvt. Ltd- 2nd
to 3rd
January 2014
Participated
2 V.Manoja(128w5a0322)
P.Nagamani(128w5a0318)
Harillah128w5a0310
A.Akhila128w5a0304
Madhuri128w5a0312
V.Eeswari(128w5a0324)
A.L.Aishwarya(118w1a0302)
D.Ankama rao (128w5a0307)
K.Sudheer 118w1a0336
K.Chandini 118w1a0329
workshop -ZEST 2K14 , workshop conducted at
Lakkireddy balireddy college of engineering,
mylavaram.- 22nd
to 23rd feb 2014
Participated
3 V.Manoja(128W5a0322) Tech quiz -MELAZO’14, organised by Paladugu 2nd
prize
P.Nagamani(128w5a0318) Parvathi devi college of engineering-6th feb 2014
4 K.Chandraneel(118w1a0385)
V.Phanibhargav(118w1a03b8)
M.Sasi kiran(118w1a0393)
T.Venkatratnam(118w1a03b1)
Robo race- Gudlavalleru engineering college Participated
5 K.Chandraneel(118w1a0385)
V.Phanibhargav(118w1a03b8)
Robo race-MELAZO’14, organised by Paladugu
Parvathi devi college of engineering - 6th feb
2014
Participated
6 K.Krishna teja(118w1a0383) Workshop- Andhra university Participated
7 KVinod kumar (118W1a0387)
M.Purushottam (118w1a0396)
Enterprenureship- Enterprenureship programme
organized at IIT Kharagpur-10th -12
th jan 2014
Participated
8 P.Venkat ajay(128w5a0319) Group dance- Youthfest at IIT Kharagpur - 22nd
jan 2014
Participated
9 P.Venkat ajay(128w5a0319) Mono action,Mime- GEC’FEST at Gudlavalleru
engineering college-1st feb 2014
1st prize
2nd
prize
10 P.Venkat ajay(128w5a0319) Mono action
Singing - SAMAYAK’14 three day event
organized at KL University-19th -22
nd feb 2014
1st prize
2nd
prize
11 G.Lavanya (118W1A0319)
K.Madhuri (128W5A0312)
A.Akhila (128W5A0304)
K.Havilla (128W5A0310)
CAD Mania - SAMAYAK’14 three day event
organized at KL University-19th -22
nd feb 2014
Participated
12 G.Lavanya( 118W1A0319)
K.Madhuri (128W5A0312)
A.Akhila( 128W5A0304)
K.Havilla (128W5A0310)
FARM Puzzle - SAMAYAK’14 three day event
organized at KL University-19th -22
nd feb 2014
Participated
13 G.Lavanya (118W1A0319)
K.Madhuri (128W5A0312)
A.Akhila (128W5A0304)
K.Havilla (128W5A0310)
Village Drawing - SAMAYAK’14 three day
event organized at KL University-19th -22
nd feb
2014
Participated
14 G.Lavanya (118W1A0319)
K.Madhuri (128W5A0312)
Your Truss - SAMAYAK’14 three day event
organized at KL University-19th -22
nd feb 2014
Participated
A.Akhila (128W5A0304)
K.Havilla (128W5A0310)
15 S.Manasa(118W1A03B0)
S.Fasiha Sultana (1181A03A5)
Robo Gravity Workshop- AMAYAK’14 three
day event organized at KL University-20th -21
ST
feb 2014
Participated
16 J.V Varun Kumar (118W1A0324)
A.Megasyam (118W1A0301)
Workshop on Biped Participated in
Worshop
17 K.N.S.Srinivas( 118W1A0325) Paper presentation Presented a Paper
18 Kishore Kumar P (128W1A0336)
Maneesh Dora(128W1A0310)
Srinu Mylapalli(128W1A0334)
S Rajeswara Reddy(128W1A0355)
WORKSHOP –BIKERS-
IIT BOMBAY Tech Fest
- Jan(2-3),2014
Participated
PLACEMENTS DURING JANUARY TO JUNE 2014
Sl.No STUDENT NAME ROLL NUMBER INDUSTRY NAME
1 MARAM REDDY ANIL REDDY 108W1A0339 AMARARAJA
2 CHUNDRU ADITYA 108W1A0370 AMARARAJA
3 POOLA VENKATA GANGADHAR 118W5A0317 AMARARAJA
4 G.D.L.DURGAANITHA 108W1A0373 INFOTECH
5 J.JYOTSNA PREETHI 108W1A0379 INFOTECH
6 PALURI NAGESWARA RAO 118W5A0315 INFOTECH
7 KOPPESEETY KAVYA SREE 108W1A0335 VEREXO
8 ANNAM CHANDINI PRIYANKA 108W1A0301 INFOSYS
9 CHAPARA CHANDRA KIRAN MURTHY 108W1A0312 INFOSYS
10 GADDAMANUGU CHAYA PRIYA 108W1A0318 INFOSYS
11 GENTELA KARTHIK SAI KRISHNA 108W1A0320 INFOSYS
12 ABDUL AZEEM 108W1A0361 INFOSYS
13 AGARWAL ANKUSH 108W1A0365 INFOSYS
14 MOHAMMAD ADIL BAIG 108W1A0393 INFOSYS
15 NAKKA JOHN MARY FLORENCE 108W1A0395 INFOSYS
16 PYDI BHARAT KUMAR 108W1A03B0 INFOSYS
EQUIPMENTS PURCHASED
S. No Nature of the equipment
Laboratory in which it is used
or if a new lab is set up -details
Amount spent
1 Computerised VCR Diesel
Engine Test rig
Advanced IC Engines lab Rs.6,87,000
2 Exhaust Gas Analyzer(6 gas) Advanced IC Engines lab Rs.3,09,150
3 Experimental Coolling Tower Heat Transfer Lab Rs.99,615
4 Vapour absorption refrigeration
Test Rig
Heat Transfer Lab Rs.1,01,332.5
5 Unsteady state heat transfer unit Heat Transfer Lab Rs.37,785
6 Shell and tube heat exchanger Heat Transfer Lab Rs.58,395
7 Drop and film wise condunsation Heat Transfer Lab
Rs.43,510
8 MATLAB software Computer Lab Rs 29,15,210
9 CAM software Computer Lab Rs.3,04,500
CONSULTANCY
S.No Nature of the work Agency to which consultancy
is offered
Revenue earned
1 Tensile, Flexural and Impact
testing
RVR & JC College of
Engineering, Guntur
Rs.10,533/-
2 Tensile, Flexural and Impact
testing
Layola College of Engineering Rs. 3876/-
PH.D. REGISTERED
1. Mr. K. Siva Prasad, Assistant Professor, ME Dept.– Acharya Nagarjuna University, Guntur, A. P.
2. Mrs. Supraja Reddy, Assistant Professor, ME Dept.–Acharya Nagarjuna University, Guntur, A.P
PH.D. AWARDED
1.
Name: Dr. G. DILLI BABU
University: JNTUA, Anantapur
Date of Award: 18th June, 2014
Thesis Title: Experimental Analysis and
Optimization of Machining Parameters for Natural
Fiber Reinforced Plastics
2.
Name: Dr. K. Nagamalleswara Rao,
University: I I T Kharagpur, Kharagpur
Date of Award: April 04, 2014
Thesis Title: Studies on Ammonia Based Solid
Sorption Refrigeration Systems
IPR AND PATENTS
Department of mechanical engineering organized a one day awareness programme on the topic ‘IPR and
Patents’ under TEQUIP – II, S. C. 1.2 on 25th January 2014. Resource person: Ashok Doppalapudi,
Patent Engineering, Ford, India.
Dr. Ashok Doppalapudi, graced the function as Chief Guest. Speaking on the occasion, he highlighted the
basic procedure to obtain the Intellectual Property Rights (IPR) and patents in engineering.
The term "Intellectual Property Rights" refers to the legal rights granted with the aim to protect the
creations of the intellect. These rights include Industrial Property Rights (e.g. patents, industrial designs
and trademarks) and Copyright (right of the author or creator) and Related Rights (rights of the
performers, producers and broadcasting organisations).
A patent is an exclusive right granted for an invention. Generally speaking, a patent provides the patent
owner with the right to decide how - or whether - the invention can be used by others. In exchange for this
right, the patent owner makes technical information about the invention publicly available in the
published patent document.
He also spoke about the scope for carrying out patent research and projects in the field of engineering and
science. Delegates from educational institution, industries and research organizations participated in large
number. The workshop was organized by Dr. A. V. Ratna Prasad, Professor, Department of Mechanical
Engineering, V.R. Siddhartha Engineering College, Vijayawada.
MASTERCAM
Department of mechanical engineering organized a three day training Programme on “MASTERCAM”
during 18th & 20
th Feb 2014. Resource person: S. Ramesh Krishnan, SIMTEK Technologies private
limited, Chennai.
During the training period, the resources person highlighted the basic procedures and programming
methods for “MASTERCAM”. He also provided the hands on training on MASTERCAM software to the
participants and presented some example cam programs.
MASTERCAM software is among the most essential breakthroughs in manufacturing technology.
Together with CAD software, they're collectively known as CAD/CAM. CAD/CAM is definitely an
acronym that stands for Computer Aided Design and Personal computer Aided Manufacture. With these
unique programs, engineers, architects and designers can use computers to style goods and structures with
relative ease. Utilizing Mastercam software, engineers and machinists can make use of the digital info
developed using CAD software to manufacture products and elements accurately inside a timely method.
Faculty attended: Dr. P. S. Srinivasu, N.Vijaya Kumar, A.Mallikarjuna, V.V.Venu Madhav, Ch.Hari
Krishna, P.Nanda Kishore, G.Dilli Babu, G.Sridhar Babu.
Awareness on schemes of National Funding Agencies
Department of mechanical engineering organized a Guest Lecture on “Awareness on schemes of National
Funding Agencies” under TEQIP-II, S.C.1.2 on 15th March 2014. Resource person: P. R. Hariharan, New
Delhi.
The aim of the workshop is to provide the basic information on different funding agencies like University
Grants Commission (UGC), All India Council for Technical Education (AICTE), Council of Scientific
and Industrial Research (CSIR), Defense Research and Development Organization (DRDO), Department
of Science and Technology (DST), Indian Space Research Organization (ISRO), Ministry of Environment
and Forests (MOEF). Delegates from educational institution, staff and students of V R Siddhartha
engineering college were participated in large number.
Applications of Nano Technology
Department of mechanical engineering organized a one day Faculty Development Program on
“Applications of Nano Technology” under TEQUIP – II, S. C. 1.2, on 21st April 2014.
Dr. K. Veera Brahmam, Scientist ‘E’, Advanced System Laboratory, Defense Research and Development
Organization (DRDO), Hyderabad graced the function as Chief Guest. Speaking on the occasion, he
highlighted the basic principals and advantages of Nano Technology.
Dr. K. Ramji, Professor Department of Mechanical Engineering, Andhra University, Visakhapatnam
graced the function and speaking on the occasion, he discussed the challenges faced in the Nano
Technology and stressed upon the remedial measures required to be taken in this respect. He also spoke
about the scope for carrying out research and projects in the field of Nano Technology and science.
Delegates from educational institution, industries and research organizations participated in large number.
STUDENT PHOTOS DETAILS
1. Prof. J Naga Malleswara Rao exhibited ‘Automobile Exhibition Show’ containing of Benz cars,
B M W cars, Toyota Land Cruiser cars, and also Harley Davidson Motorcycles in V R Siddhartha
Engineering College, Kanuru on 15 Feb, 2014 for Cultural and Literary Competitions (AFOSEC -
14).
2. 4/4 ME Student Syam and his team performing Dance show in the Annual Day of V R Siddhartha
Engineering College on 28th March 2014.
3. 3/4 ME students organized the ‘Robo Race’ Competition in Annual Festival of Siddhartha
Engineering College 2014 (AFOSEC – 2014).
4. 3/4 ME students organized the ‘Robo War’ Competition in Annual Festival of Siddhartha
Engineering College 2014 (AFOSEC – 2014).
5. 3/4 ME students organized the ‘Robo Soccer’ Competition in Annual Festival of Siddhartha
Engineering College 2014 (AFOSEC – 2014).
6. 2/4, B.Tech students (Raju Yalagada, Rohit Yalamanchli, Thummmalapalli Gopi, Shaik
Kareem, Tadepalli Sai Krishna) of V. R. Siddhartha Engineering College have fabricated a
“MOBILE WAR ROBOT” and participated in ROBO-RAGE competition, in the National level
technical fest organized by “Indian Institute of Space Science & Technology”,
Thiruvananthapuram, Kerala, scheduled during 28th Feb - 3rd March, 2014, and won 4th prize.