properties and characteristics of metglas amorphous soft ...metglas® amorphous soft magnetic...
TRANSCRIPT
電磁気的特性Electrical and Magnetic Characteristics
物理的特性Physical Characteristics
製品をより正しく、安全にご使用いただくために、さらに詳細な特性・仕様をご確認いただける仕様書をご請求ください。当カタログの記載内容は、改良その他により予告なく変更する場合がありますので、あらかじめご了承ください。For safety and the proper use, you are requested to con�rm our product speci�cations or to implement the approval sheet for product speci�cations before ordering. This catalog and its contents are subject to change without notice.
超急冷鋳造技術(冷却速度:約 106℃/s)Rapidly Quenched Casting Technology (Quenching Rate: ~106℃/s)
溶融合金を結晶化させずにリボン化Fabricating Molten Alloy into Ribbon without Crystallization
溶解炉Melting Furnace
鋳造制御Casing Controller
リボン巻取りRibbon Winding
鋳造ロールCasting Roll
アモルファスとは? What is an Amorphous Alloy ?
アモルファスリボンの製造方法
Production Process of Amorphous Ribbon
通常の金属材料 Common Metallic Alloys アモルファス Amorphous Alloys
規則的・周期的な原子配列の結晶材料Crystalline alloys have periodic atomic structures.
規則性のないランダムな原子配列の非結晶材料Non-crystalline (amorphous) alloys have random atomic structures.
原子配列のイメージ図Image chart of atomic arrangement
原子配列のイメージ図Image chart of atomic arrangement
磁化過程の磁区の動きが容易ではないDomain wall motion is impeded by structural defects such as grain boundaries.
加工と熱処理で結晶方位や結晶粒の大きさを変化させたりすることは可能Local grain size and direction can be varied by post-fabrication treatments.
結晶磁気異方性がないため磁化過程の磁区の動きが容易Randam network of atoms results in lack of crystalline anisotropy.
優れた軟磁性・低損失Excellent Soft Magentic Properties.
熱処理で磁気異方性を制御できるMagnetic properties can be widely changed by heat treatments.
鋼 種Material
組 成Composition
公称リボン幅Nominal ribbion
width(mm)
飽和磁束密度Saturation flux
densityBs(T)
保磁力 Coercive forceHc(A/m)
電気抵抗率Electrical resistivity(μΩ・m)
磁 歪 Magnetostriction λs(ppm)
キュリー温度Curie temp.Tc(℃)
結晶化開始温度Crystallization temp.
Tx(℃)
密度Density
X 103(kg/m3)
引張強さTensile strength(MN/m2)
ヤング率Young's modulus(GPa)
熱膨張係数Thermal expansion(ppm/℃)
公称リボン厚Nominal ribbon
thickness(μm)
電磁気的特性Electrical and Magnetic Characteristics
物理的特性Physical Characteristics
鋼 種Material
組 成Composition
公称リボン幅Nominal ribbion
width(mm)
飽和磁束密度Saturation flux
densityBs(T)
保磁力 Coercive forceHc(A/m)
電気抵抗率Electrical resistivity(μΩ・m)
磁 歪 Magnetostriction λs(ppm)
キュリー温度Curie temp.Tc(℃)
密度Density
X 103(kg/m3)
公称リボン厚Nominal ribbon
thickness(μm)
アモルファス軟磁性材料Metglas®の代表的な特性表
Metglas® アモルファスろう材の合成組成と諸特性
ナノ結晶軟磁性材料FINEMET ®の代表的な特性表
2605HB1M
2605SA1
2605S3A
2705M
2714A
2826MB
FT-3M
Fe-Si-B
Fe-Si-B
Fe-Si-B-Cr
Co-Fe-Ni-Si-B-Mo
Co-Fe-Ni-Si-B
Ni-Fe-Mo-B
Fe-Si-B-Cu-Nb 18 1.23 1.20 < 1 570 7.302.553
25
25
18
22
15
29
1.63
1.56
1.41
0.77
0.57
0.88
1.5
2.0
5.0
1.0
0.4
4.0
1.20
1.30
1.38
1.36
1.42
1.38
27
27
20
< 0.5
< 0.5
12
363
399
358
365
225
353
490
510
535
520
550
410
7.33
7.18
7.29
7.80
7.59
7.90
2,100
2,000
2,000
2,000
2,000
2,000
120
110
110
110
110
110
4.3
7.6
6.7
12
12.7
11.7
142.2170.2213.4142.2170.2213.4
50.8
50.8
50.8
12.7
MBF-15
MBF-20
MBF-30
MBF-50
MBF-51
MBF-53
MBF-60
MBF-64
MBF-67
MBF-80
AWS BNi-2 / AMS 4777
AWS BNi-3 / AMS 4778
AWS BNi-5a
AWS BNi-5b
AWS BNi-6
AWS BNi-9
Cr
13.0
7.0
19.0
15.0
15.0
17.5
25.0
15.0
Fe
4.2
3.0
4.0
< 1.0
Si
4.5
4.5
4.5
7.3
7.3
7.3
3.0
1.5
C*
0.03
0.06
0.06
0.08
0.06
0.06
0.1
0.06
B
2.8
3.2
3.2
1.5
1.4
1.4
0.8
0.5
4.0
P
11.0
5.0
6.0
Mo
5.0
1.0
1.5
Ni
Bal
Bal
Bal
Bal
Bal
Bal
Bal
Bal
Bal
Bal
965
969
984
1,052
1,030
1,045
883
913
890
1,048
1,103
1,024
1,054
1,144
1,126
1,127
921
978
970
1,091
1,135
1,055
1,085
1,170
1,195
1,195
950
1,010
1,000
1,120
7.82
7.88
8.07
7.70
7.73
7.75
8.14
7.68
7.70
7.94
合金名Alloy name
固相線(℃)Solidus temp.
液相線(℃)Liquidus temp.
ろう付け温度(℃)Braze temp.
密度Density
X 103(kg/m3)AWS & AMS規格
AWS and ASM Standard
公称組成(wt%) Nominal Composition
*最大含有量*Maximum concentration
アモルファス金属材料で省エネルギーに貢献 ! Save the Earth with Amorphous!
本カタログに記載されたデータは保証値ではありません。The characteristics listed on this catalog are representative values and they do not guarantee the quality of the product.
Properties and Characteristics of Metglas® Amorphous Soft Magnetic Materials
Properties and Characteristics of FINEMET ® Nanocrystalline Soft Magnetic Materials
Chemical Compositions and Characteristics of Metglas® Brazing Foil
Size:W613(210・210・193)mm×H297mm■アモルファスリボン改訂_中面_校了
Metglas® Amorphous Soft Magnetic Materials/ FINEMET ® Nanocrystalline Magnetic Materials
The precursor of FINEMET® is amorphous ribbon (non-crystalline)
produced by rapid quenching at one million °C/second from
molten metal consisting of Fe, Si, B and small amount of Cu
and Nb. Extremely small and uniform grains, nano-crystalline
(~10nm) are obtained by heat treatment of this ribbon above
the crystallization temperature. This nano-crystalline structure
leads to superior soft magnetic properties than amorphous
alloys.
It was commonly known that magnetic properties are deteriorated
with decrease of grain size. Contrary to his common understanding,
FINEMET® achieves excellent soft magnetic properties with
nano-order crystal grains.
2014.5 Catalog No. HJ-B10-B Printed in May 2014(T-FT3)
アモルファス合金薄帯アモルファス合金薄帯AMORPHOUS ALLOY RIBBON
上記連絡先は2014年5月現在のものです。変更になる場合もありますので、電話やファクシミリがつながらない場合は、お手数ですが下記までご連絡をお願いいたします。The contact addresses above are current as of May 2014 but are subject to change without notice. If you have difficulty contacting Hitachi Metals, please use the contact information below:
日立金属株式会社 コミュニケーション室 0800−500−5055Hitachi Metals, Ltd. Corporate Communications. Tel : +81-3-5765-4076 Fax : +81-3-5765-8312
アモルファス軟磁性材料Metglas®/ ナノ結晶軟磁性材料FINEMET ®
アモルファスろう材 Metglas® Brazing Foil (MBF)
FINEMET ® の特長 Features
ファインメット®とは What is FINEMET ®
● 飽和磁束密度と比透磁率の双方が高い
● 磁歪が小さい
● 熱処理によってB-H曲線の形状制御が可能
● 温度特性が優れ、かつ経時変化が小さい
ファインメット®の素材は、Feを主成分にして、これにSi(シリコン)とB(ボロン)および微量のCu(銅)とNb(ニオブ)を添加した独自組成の高温融液を約100万℃/秒で急冷固化したアモルファス(非晶質)薄帯です。この素材を結晶化温度以上で熱処理し、結晶粒径をこれまで実現出来なかった10nm(nm:ナノメータ、1nm=0.001μm=百万分の1mm)程度まで小さくしています。結晶の微細化により磁気特性はアモルファスのときに比べて大幅に向上します。従来、結晶質磁性材料では、結晶組織が細かいほど軟磁
気特性は悪くなるとされてきましたが、日立金属オリジナルのファインメット®が、この常識をくつがえしました。
● High saturation flux density and high permeability
● Low magnetostriction
● Flexibility to control magnetic properties “B-H Curve Shape”
● Excellent temperature characteristics and small aging effects
特 長 Features
● 合金100%(バインダを含まないため環境に優しい)● 箔のため接合部に密着する● 溶融流動性良好● エッチング加工および打ち抜き加工などが容易● 仕上がりが滑らか
主な応用用途例 Major Applications
自動車、触媒コンバーター、熱交換器、ハニカム構造、航空機用部品、管材料の接合、超硬合金、工具鋼、補強材料Automotive, Catalytic Converter, Heat Exchanger, Honeycomb Body, Aerospace, Mechanical Equipment, Tube Material Brazing, Carbide Alloy, Tool Steel, Rainforcement
従来のNi基ろう材は、脆く圧延加工が不可能なため、粉末ろう材をペースト状樹脂バインダーに練り混ぜ、接合部に使用するという時間とコストをかけていました。それに対し、Metglas®ろう付け箔は、薄い靭性のある金属箔であるため、接合部分にそのまま使用する事ができます。ペースト状バインダーを使わずに簡便に金属接合ができます。
As conventional Ni-based brazing alloys are too brittle to be rolled into foil, they previously were utilized in powder filled paste with resin binders and applied to the joint part, whose process was time and labor consuming. On the other hand, Metglas® brazing foils can be easily applied in joint parts as they are thin and ductile metallic foils. Easy metal joints can be obtained without using binder paste.
ろう付け用箔帯Brazing Foi
ろう付け後のフィレットFillet after brazing
例)熱交換器の接合部 e.g.) Joint of Heat Exchangeres
● 100% alloy foil (environmentally-friendly with no binder)
● Foils adhere to joint area.
● Instant melting and superior wetting and flow.
● Easy to etch and stamp.
● Smooth surface after joining.
バインダーレスのろう材です。 Brazing Foil Free from Organic Binder
ファインメット®のミクロ組織Microstructure of FINEMET ®
20nm
●「Metglas®」は、Metglas, Inc.の登録商標です。「ファインメット®」および「FINEMET ®」は、日立金属の登録商標です。 Metglas® is a registered mark of Metglas,Inc. FINEMET ® is a registered mark of Hitachi Metals, Ltd.
2.5
2.0
1.5
1.0
0.5
0.00.1 1 10 100
保磁力Hc(A/m)Coercivity Hc(A/m)
飽和磁束密度Bs(T)
Sat
urat
ion
Ind
uctio
n B
s(T
)
低エネルギー損失Lower energy loss
小型化
Do
wns
izin
g 方向性電磁鋼板Grain-oriented Silicon Steel
Fe-6.5%Si
パーマロイ(高磁束密度材)Permalloy(High Bs)
パーマロイ(高磁束密度材)Permalloy(High permeability)
Mn-ZnフェライトMn-Zn ferrite
Fe-Al-Si
Fe基アモルファス Metglas®Fe-based amorphous
Co基アモルファス Metglas®Co-based amorphous
Fe基ナノ結晶 FINEMET®Fe-based nanocrystalline
440 Allied Drive Conway, SC 29526, U.S.A.Tel:+1-800-581-7654, +1-843-349-7319 Fax:+1-843-349-6815
Chicago Office2101 S. Arlington Heights Road Suite 116, Arlington Heights, IL 60005-4142Tel:+1-847-364-7200 Fax:+1-847-364-7279
Head OfficeImmermannstrasse 14-16, 40210 Duesseldorf, GermanyTel:+49-211-16009-0 Fax:+49-211-16009-29
12 Gul Avenue, Singapore 629656Tel:+65-6861-7711 Fax:+65-6861-9554
Plot No 94 & 95, Sector 8, IMT Manesar, Gurgaon-122050, Haryana, IndiaTel:+91-124-4812300 / 4812400 / 4124800 Fax:+91-124-2290015
Units 2212-14, 22/F., Miramar Tower, 132 Nathan Road, Tsimshatsui, Kowloon, Hong KongTel:+852-2724-4183 Fax:+852-2311-2095
Taipei Branch11F, No.9, Xiangyang Road, Zhongzheng District, Taipei City 10046, TaiwanTel:+886-2-2311-2777 Fax:+886-2-2381-5210
http://www.hitachi-metals.co.jp
高級金属カンパニー 軟磁性材料統括部 High-Grade Metals Company Soft Magnetic Materials Business Unit
本 社〒105-8614 東京都港区芝浦一丁目2番1号(シーバンスN館)Tel:03-5765-4054 Fax:03-5765-8317
Head OfficeSEAVANS North Bldg., 2-1, Shibaura 1-chome, Minato-ku, Tokyo 105-8614, JapanTel:+81-3-5765-4054 Fax:+81-3-5765-8317
http://www.hitachi-metals.co.jp
メトグラス安来工場 製品技術グループ〒692-8601 島根県安来市飯島町1240番地2Tel:0854-22-1988 Fax:0854-22-1946
Metglas Yasugi Works1240-2 Hashima-cho, Yasugi-shi, Shimane-ken 692-8601, JapanTEL : +81-854-22-1988 FAX:+81-854-22-1946
■アモルファスリボン改訂_表面_校了Size:W613(193・210・210)mm×H297mm
電磁気的特性Electrical and Magnetic Characteristics
物理的特性Physical Characteristics
製品をより正しく、安全にご使用いただくために、さらに詳細な特性・仕様をご確認いただける仕様書をご請求ください。当カタログの記載内容は、改良その他により予告なく変更する場合がありますので、あらかじめご了承ください。For safety and the proper use, you are requested to con�rm our product speci�cations or to implement the approval sheet for product speci�cations before ordering. This catalog and its contents are subject to change without notice.
超急冷鋳造技術(冷却速度:約 106℃/s)Rapidly Quenched Casting Technology (Quenching Rate: ~106℃/s)
溶融合金を結晶化させずにリボン化Fabricating Molten Alloy into Ribbon without Crystallization
溶解炉Melting Furnace
鋳造制御Casing Controller
リボン巻取りRibbon Winding
鋳造ロールCasting Roll
アモルファスとは? What is an Amorphous Alloy ?
アモルファスリボンの製造方法
Production Process of Amorphous Ribbon
通常の金属材料 Common Metallic Alloys アモルファス Amorphous Alloys
規則的・周期的な原子配列の結晶材料Crystalline alloys have periodic atomic structures.
規則性のないランダムな原子配列の非結晶材料Non-crystalline (amorphous) alloys have random atomic structures.
原子配列のイメージ図Image chart of atomic arrangement
原子配列のイメージ図Image chart of atomic arrangement
磁化過程の磁区の動きが容易ではないDomain wall motion is impeded by structural defects such as grain boundaries.
加工と熱処理で結晶方位や結晶粒の大きさを変化させたりすることは可能Local grain size and direction can be varied by post-fabrication treatments.
結晶磁気異方性がないため磁化過程の磁区の動きが容易Randam network of atoms results in lack of crystalline anisotropy.
優れた軟磁性・低損失Excellent Soft Magentic Properties.
熱処理で磁気異方性を制御できるMagnetic properties can be widely changed by heat treatments.
鋼 種Material
組 成Composition
公称リボン幅Nominal ribbion
width(mm)
飽和磁束密度Saturation flux
densityBs(T)
保磁力 Coercive forceHc(A/m)
電気抵抗率Electrical resistivity(μΩ・m)
磁 歪 Magnetostriction λs(ppm)
キュリー温度Curie temp.Tc(℃)
結晶化開始温度Crystallization temp.
Tx(℃)
密度Density
X 103(kg/m3)
引張強さTensile strength(MN/m2)
ヤング率Young's modulus(GPa)
熱膨張係数Thermal expansion(ppm/℃)
公称リボン厚Nominal ribbon
thickness(μm)
電磁気的特性Electrical and Magnetic Characteristics
物理的特性Physical Characteristics
鋼 種Material
組 成Composition
公称リボン幅Nominal ribbion
width(mm)
飽和磁束密度Saturation flux
densityBs(T)
保磁力 Coercive forceHc(A/m)
電気抵抗率Electrical resistivity(μΩ・m)
磁 歪 Magnetostriction λs(ppm)
キュリー温度Curie temp.Tc(℃)
密度Density
X 103(kg/m3)
公称リボン厚Nominal ribbon
thickness(μm)
アモルファス軟磁性材料Metglas®の代表的な特性表
Metglas® アモルファスろう材の合成組成と諸特性
ナノ結晶軟磁性材料FINEMET ®の代表的な特性表
2605HB1M
2605SA1
2605S3A
2705M
2714A
2826MB
FT-3M
Fe-Si-B
Fe-Si-B
Fe-Si-B-Cr
Co-Fe-Ni-Si-B-Mo
Co-Fe-Ni-Si-B
Ni-Fe-Mo-B
Fe-Si-B-Cu-Nb 18 1.23 1.20 < 1 570 7.302.553
25
25
18
22
15
29
1.63
1.56
1.41
0.77
0.57
0.88
1.5
2.0
5.0
1.0
0.4
4.0
1.20
1.30
1.38
1.36
1.42
1.38
27
27
20
< 0.5
< 0.5
12
363
399
358
365
225
353
490
510
535
520
550
410
7.33
7.18
7.29
7.80
7.59
7.90
2,100
2,000
2,000
2,000
2,000
2,000
120
110
110
110
110
110
4.3
7.6
6.7
12
12.7
11.7
142.2170.2213.4142.2170.2213.4
50.8
50.8
50.8
12.7
MBF-15
MBF-20
MBF-30
MBF-50
MBF-51
MBF-53
MBF-60
MBF-64
MBF-67
MBF-80
AWS BNi-2 / AMS 4777
AWS BNi-3 / AMS 4778
AWS BNi-5a
AWS BNi-5b
AWS BNi-6
AWS BNi-9
Cr
13.0
7.0
19.0
15.0
15.0
17.5
25.0
15.0
Fe
4.2
3.0
4.0
< 1.0
Si
4.5
4.5
4.5
7.3
7.3
7.3
3.0
1.5
C*
0.03
0.06
0.06
0.08
0.06
0.06
0.1
0.06
B
2.8
3.2
3.2
1.5
1.4
1.4
0.8
0.5
4.0
P
11.0
5.0
6.0
Mo
5.0
1.0
1.5
Ni
Bal
Bal
Bal
Bal
Bal
Bal
Bal
Bal
Bal
Bal
965
969
984
1,052
1,030
1,045
883
913
890
1,048
1,103
1,024
1,054
1,144
1,126
1,127
921
978
970
1,091
1,135
1,055
1,085
1,170
1,195
1,195
950
1,010
1,000
1,120
7.82
7.88
8.07
7.70
7.73
7.75
8.14
7.68
7.70
7.94
合金名Alloy name
固相線(℃)Solidus temp.
液相線(℃)Liquidus temp.
ろう付け温度(℃)Braze temp.
密度Density
X 103(kg/m3)AWS & AMS規格
AWS and ASM Standard
公称組成(wt%) Nominal Composition
*最大含有量*Maximum concentration
アモルファス金属材料で省エネルギーに貢献 ! Save the Earth with Amorphous!
本カタログに記載されたデータは保証値ではありません。The characteristics listed on this catalog are representative values and they do not guarantee the quality of the product.
Properties and Characteristics of Metglas® Amorphous Soft Magnetic Materials
Properties and Characteristics of FINEMET ® Nanocrystalline Soft Magnetic Materials
Chemical Compositions and Characteristics of Metglas® Brazing Foil
Size:W613(210・210・193)mm×H297mm■アモルファスリボン改訂_中面_校了
Metglas® Amorphous Soft Magnetic Materials/ FINEMET ® Nanocrystalline Magnetic Materials
The precursor of FINEMET® is amorphous ribbon (non-crystalline)
produced by rapid quenching at one million °C/second from
molten metal consisting of Fe, Si, B and small amount of Cu
and Nb. Extremely small and uniform grains, nano-crystalline
(~10nm) are obtained by heat treatment of this ribbon above
the crystallization temperature. This nano-crystalline structure
leads to superior soft magnetic properties than amorphous
alloys.
It was commonly known that magnetic properties are deteriorated
with decrease of grain size. Contrary to his common understanding,
FINEMET® achieves excellent soft magnetic properties with
nano-order crystal grains.
2014.5 Catalog No. HJ-B10-B Printed in May 2014(T-FT3)
アモルファス合金薄帯アモルファス合金薄帯AMORPHOUS ALLOY RIBBON
上記連絡先は2014年5月現在のものです。変更になる場合もありますので、電話やファクシミリがつながらない場合は、お手数ですが下記までご連絡をお願いいたします。The contact addresses above are current as of May 2014 but are subject to change without notice. If you have difficulty contacting Hitachi Metals, please use the contact information below:
日立金属株式会社 コミュニケーション室 0800−500−5055Hitachi Metals, Ltd. Corporate Communications. Tel : +81-3-5765-4076 Fax : +81-3-5765-8312
アモルファス軟磁性材料Metglas®/ ナノ結晶軟磁性材料FINEMET ®
アモルファスろう材 Metglas® Brazing Foil (MBF)
FINEMET ® の特長 Features
ファインメット®とは What is FINEMET ®
● 飽和磁束密度と比透磁率の双方が高い
● 磁歪が小さい
● 熱処理によってB-H曲線の形状制御が可能
● 温度特性が優れ、かつ経時変化が小さい
ファインメット®の素材は、Feを主成分にして、これにSi(シリコン)とB(ボロン)および微量のCu(銅)とNb(ニオブ)を添加した独自組成の高温融液を約100万℃/秒で急冷固化したアモルファス(非晶質)薄帯です。この素材を結晶化温度以上で熱処理し、結晶粒径をこれまで実現出来なかった10nm(nm:ナノメータ、1nm=0.001μm=百万分の1mm)程度まで小さくしています。結晶の微細化により磁気特性はアモルファスのときに比べて大幅に向上します。従来、結晶質磁性材料では、結晶組織が細かいほど軟磁
気特性は悪くなるとされてきましたが、日立金属オリジナルのファインメット®が、この常識をくつがえしました。
● High saturation flux density and high permeability
● Low magnetostriction
● Flexibility to control magnetic properties “B-H Curve Shape”
● Excellent temperature characteristics and small aging effects
特 長 Features
● 合金100%(バインダを含まないため環境に優しい)● 箔のため接合部に密着する● 溶融流動性良好● エッチング加工および打ち抜き加工などが容易● 仕上がりが滑らか
主な応用用途例 Major Applications
自動車、触媒コンバーター、熱交換器、ハニカム構造、航空機用部品、管材料の接合、超硬合金、工具鋼、補強材料Automotive, Catalytic Converter, Heat Exchanger, Honeycomb Body, Aerospace, Mechanical Equipment, Tube Material Brazing, Carbide Alloy, Tool Steel, Rainforcement
従来のNi基ろう材は、脆く圧延加工が不可能なため、粉末ろう材をペースト状樹脂バインダーに練り混ぜ、接合部に使用するという時間とコストをかけていました。それに対し、Metglas®ろう付け箔は、薄い靭性のある金属箔であるため、接合部分にそのまま使用する事ができます。ペースト状バインダーを使わずに簡便に金属接合ができます。
As conventional Ni-based brazing alloys are too brittle to be rolled into foil, they previously were utilized in powder filled paste with resin binders and applied to the joint part, whose process was time and labor consuming. On the other hand, Metglas® brazing foils can be easily applied in joint parts as they are thin and ductile metallic foils. Easy metal joints can be obtained without using binder paste.
ろう付け用箔帯Brazing Foi
ろう付け後のフィレットFillet after brazing
例)熱交換器の接合部 e.g.) Joint of Heat Exchangeres
● 100% alloy foil (environmentally-friendly with no binder)
● Foils adhere to joint area.
● Instant melting and superior wetting and flow.
● Easy to etch and stamp.
● Smooth surface after joining.
バインダーレスのろう材です。 Brazing Foil Free from Organic Binder
ファインメット®のミクロ組織Microstructure of FINEMET ®
20nm
●「Metglas®」は、Metglas, Inc.の登録商標です。「ファインメット®」および「FINEMET ®」は、日立金属の登録商標です。 Metglas® is a registered mark of Metglas,Inc. FINEMET ® is a registered mark of Hitachi Metals, Ltd.
2.5
2.0
1.5
1.0
0.5
0.00.1 1 10 100
保磁力Hc(A/m)Coercivity Hc(A/m)
飽和磁束密度Bs(T)
Sat
urat
ion
Ind
uctio
n B
s(T
)
低エネルギー損失Lower energy loss
小型化
Do
wns
izin
g 方向性電磁鋼板Grain-oriented Silicon Steel
Fe-6.5%Si
パーマロイ(高磁束密度材)Permalloy(High Bs)
パーマロイ(高磁束密度材)Permalloy(High permeability)
Mn-ZnフェライトMn-Zn ferrite
Fe-Al-Si
Fe基アモルファス Metglas®Fe-based amorphous
Co基アモルファス Metglas®Co-based amorphous
Fe基ナノ結晶 FINEMET®Fe-based nanocrystalline
440 Allied Drive Conway, SC 29526, U.S.A.Tel:+1-800-581-7654, +1-843-349-7319 Fax:+1-843-349-6815
Chicago Office2101 S. Arlington Heights Road Suite 116, Arlington Heights, IL 60005-4142Tel:+1-847-364-7200 Fax:+1-847-364-7279
Head OfficeImmermannstrasse 14-16, 40210 Duesseldorf, GermanyTel:+49-211-16009-0 Fax:+49-211-16009-29
12 Gul Avenue, Singapore 629656Tel:+65-6861-7711 Fax:+65-6861-9554
Plot No 94 & 95, Sector 8, IMT Manesar, Gurgaon-122050, Haryana, IndiaTel:+91-124-4812300 / 4812400 / 4124800 Fax:+91-124-2290015
Units 2212-14, 22/F., Miramar Tower, 132 Nathan Road, Tsimshatsui, Kowloon, Hong KongTel:+852-2724-4183 Fax:+852-2311-2095
Taipei Branch11F, No.9, Xiangyang Road, Zhongzheng District, Taipei City 10046, TaiwanTel:+886-2-2311-2777 Fax:+886-2-2381-5210
http://www.hitachi-metals.co.jp
高級金属カンパニー 軟磁性材料統括部 High-Grade Metals Company Soft Magnetic Materials Business Unit
本 社〒105-8614 東京都港区芝浦一丁目2番1号(シーバンスN館)Tel:03-5765-4054 Fax:03-5765-8317
Head OfficeSEAVANS North Bldg., 2-1, Shibaura 1-chome, Minato-ku, Tokyo 105-8614, JapanTel:+81-3-5765-4054 Fax:+81-3-5765-8317
http://www.hitachi-metals.co.jp
メトグラス安来工場 製品技術グループ〒692-8601 島根県安来市飯島町1240番地2Tel:0854-22-1988 Fax:0854-22-1946
Metglas Yasugi Works1240-2 Hashima-cho, Yasugi-shi, Shimane-ken 692-8601, JapanTEL : +81-854-22-1988 FAX:+81-854-22-1946
■アモルファスリボン改訂_表面_校了Size:W613(193・210・210)mm×H297mm