prominent fluid controls gamma l (gala) and beta metering
TRANSCRIPT
• Reliable, economical metering pumps for boilers, cooling towers
and other common chemical applications
• Capacities range from 0.19 to 8.4 gph with maximum pressure of 290 psi.
• Beta pump series features manually adjustable out- put or accepts external pulse input.
• The Gamma L series can operate in manual, follow a 4-20 mA signal or respond to an external pulse with multiplier/divider. Gamma L series LCD shows the flow rate and totalized flow.
• Gamma L series pumps include access controls to eliminate unauthorized adjustment.
• Gamma L and Beta series feature interchangeable wetted parts.
Description The ProMinent Beta (Figure 1) and Gamma L (Figure 2) series pumps are microprocessor- controlled, solenoid-driven diaphragm metering pumps. Broad range of materials of construction and configurations allow these pumps to adapt to many common Nalco chemical feed and control applica- tions. Self-degassing versions are available.
• Supplied with foot valve, injection valve and tubing (except for SS models)
• Chemical resistant NEMA 4X (IP 65) housing
• LED shows pump status (Run, Warning or Fault)
• CSA and CE approved
Figure 1 — Beta metering pumps
ProMinent® Fluid Controls Gamma L (GALa) and Beta Metering Pumps An Ecolab Company
Specification SPEC-452
Control Features – Beta pumps (Figure 3) • Continuous stroke length control 0-100%
• 10-100% frequency control in 10% increments (180 spm maximum)
• Accepts dry contact pulses and remote on/off signals via optional control cable
• Now has multiply/divide functionality; range of 1:64 – 64:1
Control/ Display Features – Gamma L pumps (Figure 4) • Continuous stroke length control 0-100%
• Continuous frequency control from 0 to 180 spm
• Accepts 4-20 mA, dry contact pulses with multiplier/divider and remote on/off signals via optional control cable
• Access can be controlled by access codes to prevent unauthorized adjustment
• LCD displays totalized flow and flow rate
• Flow verification on models with flow monitor
Specifications Capacities and pressure ratings: Refer to Tables 1–6 Reproducibility: ±2% Housing: Fiberglass reinforced PPE NEMA 4X (IP65) Diaphragm: Teflon faced Viscosity: Maximum: 500 cp; High viscosity models: 3000 cp Power Supply: 110-115 VAC or 200-230 VAC; 22 W/2 A maximum Relay load: 250 VAC, 2A, 50/60 Hz Temperature Range: 14-113°F (-10 to +45°C) Dimensions: See Figures 5 and 6
Pump Selection Guidelines 1. Choose the Beta or Gamma L model that meets your
required capacity.
2. Make sure that the maximum pressure output for the pump selected exceeds your system pressure.
3. Select the wetted end materials that are compatible with the chemical(s) being used.
Figure 3 — Beta metering pump face plate
2
Figure 4 — Gamma L metering pump face plate
4. Verify that the selected pumps have the control capabilities required for your application.
5. How do I choose between the Beta and Gamma L (GALa) pump product lines?
Key selection factors for Beta: low cost, simple operation and control
Key selection factors for Gamma L: very low feed rates, control with 4-20 mA operation, LCD display (gph and totalized flow) or access codes.
To Order Order the ProMinent Beta and Gamma L series pumps and accessories by using the Nalco part number listed in selection tables grouped by application (Tables 1–6).
Additional Beta and Gamma L pump capacities, materials of construction and options are available. Please contact Equipment Solutions Technical Support Group at 1-866-798-7444.
3
Figure 5 — Beta metering pump dimensions (inches) Figure 6 — Gamma L metering pump dimensions (inches)
Installation Guidelines (Figures 7 and 8) To minimize friction losses:
• Suction lines should be as short and straight as possible to minimize friction losses
• Stay with recommended tubing/pipe sizes or use larger diameters
Flooded suction is always recommended to ensure the most trouble-free installation. This is especially im- portant when pumping viscous products. If a flooded suction is not practical, be sure to install a foot valve to hold pump prime.
When pumping products that tend to evolve gas, keep the stroke length above 50% and use the bleed valve.
Consider ordering a complete packaged feed system such as the Nalco Modular Pump Systems-Lite Indus- trial Series (Spec-445) or an Economy Modular Pump System (Spec-454) to simplify installation and ensure a quick startup.
5. 8- 6 .3
Installing the following components increases the per- formance and reliability of your chemical feed system:
• Suction strainer to remove valve-clogging particulate
• Calibration cylinder to set dosage rate with the chemical product and exact process conditions
• Flow monitor (Figure 9) to ensure that chemical is flowing to the process
• Back pressure valve to ensure consistent chemical feed accuracy and prevent siphoning
• Pressure relief valve to protect the piping system and personnel
• Injection check valve to disperse the chemical into the process
These components are included on many of the Lite Industrial package systems.
Support If you have any questions about the ProMinent Beta and Gamma L (GALa) metering pumps, please contact your Nalco representative. In North America, you can contact the Equipment Solutions Help Desk at 1-866-798-7444.
Figure 7 — Typical installation of Beta metering pump
Figure 9 — Flow monitor
5
Accessories Individual liquid end repair kits are shown with the pumps in the selection tables.
Nalco Part Number Description 121-PJ1032.88 Foot valve (316 SS) 121-PJ1033.88 Injection valve (316 SS) 121-PJ1034.88 Remote control cable (6 ft),
required for external pulse, remote on/off or 4-20 mA
121-PJ1035.88 Pipe Converter (metric to 1/2” MNPT) PP
121-PJ1036.88 Pipe Converter (metric to 1/2” MNPT) PVC
121-PJ1037.88 Multi-function valve, 250 psi for 1601, 1602 models PVDF
121-PJ1038.88 Multi-function valve, 87 psi for 0708, 0713 models PVDF
121-PJ1039.88 Built-in pacing relay (Daisy chain) for Beta, Gamma L pumps
Nalco Part Number Description 121-PJ1040.88 Built-in fault relay. Recommended
when ordering flow monitor. 121-PJ1041.88 Built-in multiplier/divider for
Gamma L pumps 121-PJ1042.88 Multi-function valve, 145 psi for
1005 models PVDF 121-K1009229.88 Flow monitor for Gamma L models
1000, 1601, 1602 121-K1009336.88 Flow monitor for Gamma L 1005,
1605, 0708, 1008, 0713, 0420, 0232 121-PJ1049.88 1/2” PVC back pressure valve 121-PJ1050.88 1/2” PVC pressure relief valve 121-PJ1051.88 3/4” PVC back pressure valve 121-PJ1052.88 3/4” PVC pressure relief valve
Table 1 — Stainless steel pumps (316 SS/Teflon/ceramic) for amines and boiler feed chemicals (Figure 10)
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043737 Beta 4b 4.0 145 180 1/4 in FNPT 121-K1002549.88 6043739 Beta 4b 13 290 180 1/4 in FNPT 121-K1002551.88 6043740 Beta 4b 23 232 180 1/4 in FNPT 121-K1002552.88 121-PJ1014.88 Gamma L 7.0 250 180 1/4 in FNPT 121-K1002550.88 121-PJ1015.88 Gamma L 13 250 180 1/4 in FNPT 121-K1002551.88 121-PJ1016.88 Gamma L 26 250 100 1/4 in FNPT 121-K1002552.88
Note: Stainless pumps do not include foot valves and injection valves. Please order separately.
121-PJ1032.88 Foot Valve (316 SS) 121-PJ1033.88 Injection Valve (316 SS)
6
Table 2 — Polypropylene pumps (PP/PTFE) with bleed valve for corrosion and scale inhibitors, non-oxidizing biocides, sulfites and polymers (Figure 11). Flow monitor versions include an “F” in the part number.
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043771 Beta 4b 7 232 180 1/4 in x 3/16 in tubing 121-K1001653.88 6043772 Beta 4b 13 232 180 1/4 in x 3/16 in tubing 121-K1001654.88 6043773 Beta 4b 23 232 180 1/2 x 3/8 in tubing 121-K1001655.88 6044053 Beta 4b 70 101 180 1/2 x 3/8 in tubing 121-K1001657.88 6044054 Beta 4b 108 58 180 1/2 x 3/8 in tubing 121-K1001658.88 121-PJ1054.88 Gamma L 7 250 180 1/4 x 3/16 in tubing 121-K1001653.88 121-PJ1054F.88 Gamma L 7 250 180 1/4 x 3/16 in tubing 121-K1001653.88 121-PJ1017.88 Gamma L 13 250 180 1/4 x 3/16 in tubing 121-K1001654.88 121-PJ1017F.88 Gamma L 13 250 180 1/4 x 3/16 in tubing 121-K1001654.88 121-PJ1018.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001655.88 121-PJ1018F.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001655.88 121-PJ1019.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001657.88 121-PJ1019F.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001657.88 121-PJ1020.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001658.88 121-PJ1020F.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001658.88
Table 3 — Acrylic pumps (Acrylic/ PVC/ PTFE) with adjustable self-degassing bleed valve (Figure 11) for bleach, ACTI-BROM®, STA•BR•EX® and ELIMIN-OX®. Can be installed in flooded suction or suction lift applications. Flow monitor versions include an “F” in the part number.
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043774 Beta 4b 13 290 180 1/4 in x 3/16 in tubing 121-K1001715.88 6043775 Beta 4b 23 232 180 1/2 x 3/8 in tubing 121-K1001716.88 6044056 Beta 4b 70 101 180 1/2 x 3/8 in tubing 121-K1001718.88 6044057 Beta 4b 108 58 180 1/2 x 3/8 in tubing 121-K1001719.88 121-PJ1021.88 Gamma L 13 250 180 1/4 in x 3/16 in tubing 121-K1001715.88 121-PJ1021F.88 Gamma L 13 250 180 1/4 in x 3/16 in tubing 121-K1001715.88 121-PJ1022.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001716.88 121-PJ1022F.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001716.88 121-PJ1023.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001718.88 121-PJ1023F.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001718.88 121-PJ1024.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001719.88 121-PJ1024F.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001719.88
7
Table 4 — Acrylic pumps (Acrylic/ PVC/EPDM) with self-degassing liquid end (Figure 12) for bleach, ACTI-BROM, STA•BR•EX and ELIMIN-OX. Recommended for products that may evolve gas under storage or usage. For suction lift applications only.
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043776 Beta 4b 4 232 180 1/4 in x 3/16 in tubing 121-K1001660.88 6043777 Beta 4b 9 232 180 1/4 in x 3/16 in tubing 121-K1001661.88 6043794 Beta 4b 41 101 180 1/2 x 3/8 in tubing 121-K1001663.88 121-PJ1025.88 Gamma L 4 250 180 1/4 in x 3/16 in tubing 121-K1001660.88 121-PJ1026.88 Gamma L 9 250 180 1/4 in x 3/16 in tubing 121-K1001661.88 121-PJ1027.88 Gamma L 30 100 180 1/2 x 3/8 in tubing 121-K1001663.88
Table 5 — PVDF pumps (PVDF/TFE) for viscous products (3000 cp maximum). Flooded suction is recommended.
Table 6 — Programmable timer pumps for feeding biocides or other chemical products on a periodic basis. Use PP/Viton construction for inhibitors and non-oxidizing biocides. Use acrylic/EPDM for bleach, STA•BR•EX and ACTI-BROM.
Nalco Material of Capacity Pressure Stroke Rate Repair Kit Part Number Model Construction (gpd) (psi) (spm) Connections Part Number
6043797 Beta 5b PVDF/TFE/Ceramic 24 232 180 1/2 in MNPT x 5/8 in hose barb 121-K1019066.88
6043798 Beta 5b PVDF/TFE/Ceramic 45 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019067.89
6044060 Beta 5b PVDF/TFE/Ceramic 70 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019069.90
6044061 Beta 5b PVDF/TFE/Ceramic 108 58 180 1/2 in MNPT x 5/8 in hose barb 121-K1019070.91
121-PJ1106HV.88 Gamma L PVDF/TFE/Ceramic 26 145 180 1/2 in MNPT x 5/8 in hose barb 121-K1019066.88
121-PJ1107HV.88 Gamma L PVDF/TFE/Ceramic 45 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019067.88
121-PJ1108HV.88 Gamma L PVDF/TFE/Ceramic 70 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019069.88
121-PJ1109HV.88 Gamma L PVDF/TFE/Ceramic 108 58 180 1/2 in MNPT x 5/8 in hose barb 121-K1019070.88
Nalco Material of Capacity Pressure Stroke Rate Repair Kit Part Number Model Construction (gpd) (psi) (spm) Connections Part Number 121-PJ1085.88 Gamma L PP/V 26 145 180 1/2 in MNPT x 3/8 in tubing 121-K1001655.88 121-PJ1086.88 Gamma L PP/V 45 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001656.88 121-PJ1087.88 Gamma L PP/V 70 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001657.88 121-PJ1088.88 Gamma L PP/V 108 58 180 1/2 in MNPT x 3/8 in tubing 121-K1001658.88 121-PJ1089.88 Gamma L PP/V 200 29 180 1/2 in MNPT x 3/8 in tubing 121-K1001659.88 121-PJ1090.88 Gamma L ACR/EPDM 26 145 180 1/2 in MNPT x 3/8 in tubing 121-K1001662.88 121-PJ1091.88 Gamma L ACR/EPDM 45 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001663.88 121-PJ1092.88 Gamma L ACR/EPDM 70 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001664.88 121-PJ1093.88 Gamma L ACR/EPDM 108 58 180 1/2 in MNPT x 3/8 in tubing 121-K1001665.88 121-PJ1094.88 Gamma L ACR/EPDM 200 29 180 1/2 in MNPT x 3/8 in tubing 121-K1001720.88
Figure 10 — No bleed valve Figure 11 — Adjustable self-degassing Figure 12 — Fixed self-degassing for suction lift applications
ACTI-BROM, STA•BR•EX, ELIMIN-OX, NALCO and the logo are Trademarks of Nalco Company Ecolab is a trademark of Ecolab USA, Inc.
All other trademarks are the property of their respective owners ©2012 Nalco Company All Rights Reserved 6-12
NALCO COMPANY Locations North America: Headquarters – 1601 West Diehl Road • Naperville, Illinois 60563 • USA
Energy Services Division – 7705 Highway 90-A • Sugar Land, Texas 77487 • USA Europe: A-One Business Center • Z.A. La Pièce 1 • Route de l’Etraz • 1180-Rolle • Switzerland Asia Pacific: 2 International Business Park • #02-20 The Strategy Tower 2 • Singapore 609930 Latin America: Av. das Nações Unidas 17.891 • 6° Andar 04795-100 • São Paulo • SP • Brazil
www.nalco.com
• Capacities range from 0.19 to 8.4 gph with maximum pressure of 290 psi.
• Beta pump series features manually adjustable out- put or accepts external pulse input.
• The Gamma L series can operate in manual, follow a 4-20 mA signal or respond to an external pulse with multiplier/divider. Gamma L series LCD shows the flow rate and totalized flow.
• Gamma L series pumps include access controls to eliminate unauthorized adjustment.
• Gamma L and Beta series feature interchangeable wetted parts.
Description The ProMinent Beta (Figure 1) and Gamma L (Figure 2) series pumps are microprocessor- controlled, solenoid-driven diaphragm metering pumps. Broad range of materials of construction and configurations allow these pumps to adapt to many common Nalco chemical feed and control applica- tions. Self-degassing versions are available.
• Supplied with foot valve, injection valve and tubing (except for SS models)
• Chemical resistant NEMA 4X (IP 65) housing
• LED shows pump status (Run, Warning or Fault)
• CSA and CE approved
Figure 1 — Beta metering pumps
ProMinent® Fluid Controls Gamma L (GALa) and Beta Metering Pumps An Ecolab Company
Specification SPEC-452
Control Features – Beta pumps (Figure 3) • Continuous stroke length control 0-100%
• 10-100% frequency control in 10% increments (180 spm maximum)
• Accepts dry contact pulses and remote on/off signals via optional control cable
• Now has multiply/divide functionality; range of 1:64 – 64:1
Control/ Display Features – Gamma L pumps (Figure 4) • Continuous stroke length control 0-100%
• Continuous frequency control from 0 to 180 spm
• Accepts 4-20 mA, dry contact pulses with multiplier/divider and remote on/off signals via optional control cable
• Access can be controlled by access codes to prevent unauthorized adjustment
• LCD displays totalized flow and flow rate
• Flow verification on models with flow monitor
Specifications Capacities and pressure ratings: Refer to Tables 1–6 Reproducibility: ±2% Housing: Fiberglass reinforced PPE NEMA 4X (IP65) Diaphragm: Teflon faced Viscosity: Maximum: 500 cp; High viscosity models: 3000 cp Power Supply: 110-115 VAC or 200-230 VAC; 22 W/2 A maximum Relay load: 250 VAC, 2A, 50/60 Hz Temperature Range: 14-113°F (-10 to +45°C) Dimensions: See Figures 5 and 6
Pump Selection Guidelines 1. Choose the Beta or Gamma L model that meets your
required capacity.
2. Make sure that the maximum pressure output for the pump selected exceeds your system pressure.
3. Select the wetted end materials that are compatible with the chemical(s) being used.
Figure 3 — Beta metering pump face plate
2
Figure 4 — Gamma L metering pump face plate
4. Verify that the selected pumps have the control capabilities required for your application.
5. How do I choose between the Beta and Gamma L (GALa) pump product lines?
Key selection factors for Beta: low cost, simple operation and control
Key selection factors for Gamma L: very low feed rates, control with 4-20 mA operation, LCD display (gph and totalized flow) or access codes.
To Order Order the ProMinent Beta and Gamma L series pumps and accessories by using the Nalco part number listed in selection tables grouped by application (Tables 1–6).
Additional Beta and Gamma L pump capacities, materials of construction and options are available. Please contact Equipment Solutions Technical Support Group at 1-866-798-7444.
3
Figure 5 — Beta metering pump dimensions (inches) Figure 6 — Gamma L metering pump dimensions (inches)
Installation Guidelines (Figures 7 and 8) To minimize friction losses:
• Suction lines should be as short and straight as possible to minimize friction losses
• Stay with recommended tubing/pipe sizes or use larger diameters
Flooded suction is always recommended to ensure the most trouble-free installation. This is especially im- portant when pumping viscous products. If a flooded suction is not practical, be sure to install a foot valve to hold pump prime.
When pumping products that tend to evolve gas, keep the stroke length above 50% and use the bleed valve.
Consider ordering a complete packaged feed system such as the Nalco Modular Pump Systems-Lite Indus- trial Series (Spec-445) or an Economy Modular Pump System (Spec-454) to simplify installation and ensure a quick startup.
5. 8- 6 .3
Installing the following components increases the per- formance and reliability of your chemical feed system:
• Suction strainer to remove valve-clogging particulate
• Calibration cylinder to set dosage rate with the chemical product and exact process conditions
• Flow monitor (Figure 9) to ensure that chemical is flowing to the process
• Back pressure valve to ensure consistent chemical feed accuracy and prevent siphoning
• Pressure relief valve to protect the piping system and personnel
• Injection check valve to disperse the chemical into the process
These components are included on many of the Lite Industrial package systems.
Support If you have any questions about the ProMinent Beta and Gamma L (GALa) metering pumps, please contact your Nalco representative. In North America, you can contact the Equipment Solutions Help Desk at 1-866-798-7444.
Figure 7 — Typical installation of Beta metering pump
Figure 9 — Flow monitor
5
Accessories Individual liquid end repair kits are shown with the pumps in the selection tables.
Nalco Part Number Description 121-PJ1032.88 Foot valve (316 SS) 121-PJ1033.88 Injection valve (316 SS) 121-PJ1034.88 Remote control cable (6 ft),
required for external pulse, remote on/off or 4-20 mA
121-PJ1035.88 Pipe Converter (metric to 1/2” MNPT) PP
121-PJ1036.88 Pipe Converter (metric to 1/2” MNPT) PVC
121-PJ1037.88 Multi-function valve, 250 psi for 1601, 1602 models PVDF
121-PJ1038.88 Multi-function valve, 87 psi for 0708, 0713 models PVDF
121-PJ1039.88 Built-in pacing relay (Daisy chain) for Beta, Gamma L pumps
Nalco Part Number Description 121-PJ1040.88 Built-in fault relay. Recommended
when ordering flow monitor. 121-PJ1041.88 Built-in multiplier/divider for
Gamma L pumps 121-PJ1042.88 Multi-function valve, 145 psi for
1005 models PVDF 121-K1009229.88 Flow monitor for Gamma L models
1000, 1601, 1602 121-K1009336.88 Flow monitor for Gamma L 1005,
1605, 0708, 1008, 0713, 0420, 0232 121-PJ1049.88 1/2” PVC back pressure valve 121-PJ1050.88 1/2” PVC pressure relief valve 121-PJ1051.88 3/4” PVC back pressure valve 121-PJ1052.88 3/4” PVC pressure relief valve
Table 1 — Stainless steel pumps (316 SS/Teflon/ceramic) for amines and boiler feed chemicals (Figure 10)
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043737 Beta 4b 4.0 145 180 1/4 in FNPT 121-K1002549.88 6043739 Beta 4b 13 290 180 1/4 in FNPT 121-K1002551.88 6043740 Beta 4b 23 232 180 1/4 in FNPT 121-K1002552.88 121-PJ1014.88 Gamma L 7.0 250 180 1/4 in FNPT 121-K1002550.88 121-PJ1015.88 Gamma L 13 250 180 1/4 in FNPT 121-K1002551.88 121-PJ1016.88 Gamma L 26 250 100 1/4 in FNPT 121-K1002552.88
Note: Stainless pumps do not include foot valves and injection valves. Please order separately.
121-PJ1032.88 Foot Valve (316 SS) 121-PJ1033.88 Injection Valve (316 SS)
6
Table 2 — Polypropylene pumps (PP/PTFE) with bleed valve for corrosion and scale inhibitors, non-oxidizing biocides, sulfites and polymers (Figure 11). Flow monitor versions include an “F” in the part number.
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043771 Beta 4b 7 232 180 1/4 in x 3/16 in tubing 121-K1001653.88 6043772 Beta 4b 13 232 180 1/4 in x 3/16 in tubing 121-K1001654.88 6043773 Beta 4b 23 232 180 1/2 x 3/8 in tubing 121-K1001655.88 6044053 Beta 4b 70 101 180 1/2 x 3/8 in tubing 121-K1001657.88 6044054 Beta 4b 108 58 180 1/2 x 3/8 in tubing 121-K1001658.88 121-PJ1054.88 Gamma L 7 250 180 1/4 x 3/16 in tubing 121-K1001653.88 121-PJ1054F.88 Gamma L 7 250 180 1/4 x 3/16 in tubing 121-K1001653.88 121-PJ1017.88 Gamma L 13 250 180 1/4 x 3/16 in tubing 121-K1001654.88 121-PJ1017F.88 Gamma L 13 250 180 1/4 x 3/16 in tubing 121-K1001654.88 121-PJ1018.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001655.88 121-PJ1018F.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001655.88 121-PJ1019.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001657.88 121-PJ1019F.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001657.88 121-PJ1020.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001658.88 121-PJ1020F.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001658.88
Table 3 — Acrylic pumps (Acrylic/ PVC/ PTFE) with adjustable self-degassing bleed valve (Figure 11) for bleach, ACTI-BROM®, STA•BR•EX® and ELIMIN-OX®. Can be installed in flooded suction or suction lift applications. Flow monitor versions include an “F” in the part number.
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043774 Beta 4b 13 290 180 1/4 in x 3/16 in tubing 121-K1001715.88 6043775 Beta 4b 23 232 180 1/2 x 3/8 in tubing 121-K1001716.88 6044056 Beta 4b 70 101 180 1/2 x 3/8 in tubing 121-K1001718.88 6044057 Beta 4b 108 58 180 1/2 x 3/8 in tubing 121-K1001719.88 121-PJ1021.88 Gamma L 13 250 180 1/4 in x 3/16 in tubing 121-K1001715.88 121-PJ1021F.88 Gamma L 13 250 180 1/4 in x 3/16 in tubing 121-K1001715.88 121-PJ1022.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001716.88 121-PJ1022F.88 Gamma L 26 145 180 1/2 x 3/8 in tubing 121-K1001716.88 121-PJ1023.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001718.88 121-PJ1023F.88 Gamma L 70 100 180 1/2 x 3/8 in tubing 121-K1001718.88 121-PJ1024.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001719.88 121-PJ1024F.88 Gamma L 108 58 180 1/2 x 3/8 in tubing 121-K1001719.88
7
Table 4 — Acrylic pumps (Acrylic/ PVC/EPDM) with self-degassing liquid end (Figure 12) for bleach, ACTI-BROM, STA•BR•EX and ELIMIN-OX. Recommended for products that may evolve gas under storage or usage. For suction lift applications only.
Nalco Capacity Pressure Stroke Rate Repair Kit Part Number Model (gpd) (psi) (spm) Connections Part Number 6043776 Beta 4b 4 232 180 1/4 in x 3/16 in tubing 121-K1001660.88 6043777 Beta 4b 9 232 180 1/4 in x 3/16 in tubing 121-K1001661.88 6043794 Beta 4b 41 101 180 1/2 x 3/8 in tubing 121-K1001663.88 121-PJ1025.88 Gamma L 4 250 180 1/4 in x 3/16 in tubing 121-K1001660.88 121-PJ1026.88 Gamma L 9 250 180 1/4 in x 3/16 in tubing 121-K1001661.88 121-PJ1027.88 Gamma L 30 100 180 1/2 x 3/8 in tubing 121-K1001663.88
Table 5 — PVDF pumps (PVDF/TFE) for viscous products (3000 cp maximum). Flooded suction is recommended.
Table 6 — Programmable timer pumps for feeding biocides or other chemical products on a periodic basis. Use PP/Viton construction for inhibitors and non-oxidizing biocides. Use acrylic/EPDM for bleach, STA•BR•EX and ACTI-BROM.
Nalco Material of Capacity Pressure Stroke Rate Repair Kit Part Number Model Construction (gpd) (psi) (spm) Connections Part Number
6043797 Beta 5b PVDF/TFE/Ceramic 24 232 180 1/2 in MNPT x 5/8 in hose barb 121-K1019066.88
6043798 Beta 5b PVDF/TFE/Ceramic 45 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019067.89
6044060 Beta 5b PVDF/TFE/Ceramic 70 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019069.90
6044061 Beta 5b PVDF/TFE/Ceramic 108 58 180 1/2 in MNPT x 5/8 in hose barb 121-K1019070.91
121-PJ1106HV.88 Gamma L PVDF/TFE/Ceramic 26 145 180 1/2 in MNPT x 5/8 in hose barb 121-K1019066.88
121-PJ1107HV.88 Gamma L PVDF/TFE/Ceramic 45 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019067.88
121-PJ1108HV.88 Gamma L PVDF/TFE/Ceramic 70 101 180 1/2 in MNPT x 5/8 in hose barb 121-K1019069.88
121-PJ1109HV.88 Gamma L PVDF/TFE/Ceramic 108 58 180 1/2 in MNPT x 5/8 in hose barb 121-K1019070.88
Nalco Material of Capacity Pressure Stroke Rate Repair Kit Part Number Model Construction (gpd) (psi) (spm) Connections Part Number 121-PJ1085.88 Gamma L PP/V 26 145 180 1/2 in MNPT x 3/8 in tubing 121-K1001655.88 121-PJ1086.88 Gamma L PP/V 45 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001656.88 121-PJ1087.88 Gamma L PP/V 70 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001657.88 121-PJ1088.88 Gamma L PP/V 108 58 180 1/2 in MNPT x 3/8 in tubing 121-K1001658.88 121-PJ1089.88 Gamma L PP/V 200 29 180 1/2 in MNPT x 3/8 in tubing 121-K1001659.88 121-PJ1090.88 Gamma L ACR/EPDM 26 145 180 1/2 in MNPT x 3/8 in tubing 121-K1001662.88 121-PJ1091.88 Gamma L ACR/EPDM 45 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001663.88 121-PJ1092.88 Gamma L ACR/EPDM 70 101 180 1/2 in MNPT x 3/8 in tubing 121-K1001664.88 121-PJ1093.88 Gamma L ACR/EPDM 108 58 180 1/2 in MNPT x 3/8 in tubing 121-K1001665.88 121-PJ1094.88 Gamma L ACR/EPDM 200 29 180 1/2 in MNPT x 3/8 in tubing 121-K1001720.88
Figure 10 — No bleed valve Figure 11 — Adjustable self-degassing Figure 12 — Fixed self-degassing for suction lift applications
ACTI-BROM, STA•BR•EX, ELIMIN-OX, NALCO and the logo are Trademarks of Nalco Company Ecolab is a trademark of Ecolab USA, Inc.
All other trademarks are the property of their respective owners ©2012 Nalco Company All Rights Reserved 6-12
NALCO COMPANY Locations North America: Headquarters – 1601 West Diehl Road • Naperville, Illinois 60563 • USA
Energy Services Division – 7705 Highway 90-A • Sugar Land, Texas 77487 • USA Europe: A-One Business Center • Z.A. La Pièce 1 • Route de l’Etraz • 1180-Rolle • Switzerland Asia Pacific: 2 International Business Park • #02-20 The Strategy Tower 2 • Singapore 609930 Latin America: Av. das Nações Unidas 17.891 • 6° Andar 04795-100 • São Paulo • SP • Brazil
www.nalco.com