project - ansys · project first saved thursday, may 03, 2007 last saved thursday, march 12, 2009...
TRANSCRIPT
Project
First Saved Thursday, May 03, 2007
Last Saved Thursday, March 12, 2009
Product Version 12.0.1 Release
Imported Source C:\Graphic_Card_D\Graphic_Card_PCB.dsdb
Imported Version 11.0 SP1 Release
Contents
Units
Environmental_linked (B4, C4, D4, E4) o Geometry
Parts Heatsink2
Heatsink2 PCB Body Groups
Solid Solid Solid Conn Solid
Body Groups Solid Solid
Parts o Coordinate Systems o Connections
Contact Regions o Mesh
Mesh Controls o Named Selections o Steady-State Thermal (B5)
Initial Condition Analysis Settings Temperature 2 Imported Load (Solution 4)
Imported Temperature Solution (B6)
Solution Information Temperature
o Static Structural (C5) Analysis Settings Fixed Support Imported Load (Thermal Condition)
Imported Body Temperature Solution (C6)
Solution Information Results
o Modal (D5) Initial Condition Analysis Settings Solution (D6)
Solution Information Results
o Random Vibration (E5) Initial Condition Analysis Settings PSD Base Excitation Solution (E6)
Solution Information
Results
Material Data o Silicon o Aluminum Alloy o PCB 2 o PlasticComposite o Structural Steel
Units
TABLE 1
Unit System Metric (mm, dat, N, s, mV, mA) Degrees rad/s Celsius
Angle Degrees
Rotational Velocity rad/s
Temperature Celsius
Environmental_linked (B4, C4, D4, E4)
Geometry
TABLE 2 Environmental_linked (B4, C4, D4, E4) > Geometry
Object Name Geometry
State Fully Defined
Definition
Source C:\Graphic_Card_D\Graphic_Card_PCB.agdb
Type DesignModeler
Length Unit Millimeters
Element Control Program Controlled
Display Style Part Color
Bounding Box
Length X 109. mm
Length Y 200. mm
Length Z 110. mm
Properties
Volume 57872 mm³
Mass 3.1952e-005 dat
Scale Factor Value 1.
Statistics
Bodies 78
Active Bodies 77
Nodes 34918
Elements 7916
Mesh Metric None
Preferences
Import Solid Bodies Yes
Import Surface Bodies Yes
Import Line Bodies Yes
Parameter Processing Yes
Personal Parameter Key PC
CAD Attribute Transfer No
Named Selection Processing Yes
Named Selection Prefixes NS
Material Properties Transfer Yes
CAD Associativity Yes
Import Coordinate Systems No
Reader Save Part File No
Import Using Instances Yes
Do Smart Update Yes
Attach File Via Temp File Yes
Temporary Directory C:\Documents and Settings\jef\Application Data\Ansys\v120
Analysis Type 3-D
Mixed Import Resolution None
Enclosure and Symmetry Processing Yes
TABLE 3 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name CPU1 PowerDiss1 CPU2 PowerDiss2 PowerDiss3
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature
By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects
Yes
Bounding Box
Length X 17. mm 10. mm 14. mm 10. mm
Length Y 35. mm 10. mm 20. mm 10. mm
Length Z 1.5 mm 18. mm 1.2 mm 18. mm
Properties
Volume 892.5 mm³ 1413.7 mm³ 336. mm³ 1413.7 mm³
Mass 4.4625e-007 dat 7.0686e-007 dat 1.68e-007 dat 7.0686e-007 dat
Centroid X 16.5 mm -22. mm 6. mm -9. mm 4. mm
Centroid Y 32.5 mm 1. mm -30. mm 1. mm
Centroid Z 0.75 mm 9. mm 0.6 mm 9. mm
Moment of Inertia Ip1
4.5638e-005 dat·mm²
2.3186e-005 dat·mm²
5.6202e-006 dat·mm²
2.3186e-005 dat·mm²
Moment of Inertia Ip2
1.0831e-005 dat·mm²
2.3186e-005 dat·mm²
2.7642e-006 dat·mm²
2.3186e-005 dat·mm²
Moment of Inertia Ip3
5.6302e-005 dat·mm²
8.6359e-006 dat·mm²
8.344e-006 dat·mm²
8.6359e-006 dat·mm²
Statistics
Nodes 320 990 308 990 897
Elements 36 189 35 189 168
Mesh Metric None
TABLE 4 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Chip2 PowerCap1 PowerCap2 Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature
By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects
Yes
Bounding Box
Length X 12. mm 5. mm 1.5 mm 6. mm
Length Y 26. mm 5. mm 4. mm 6. mm
Length Z 1.4 mm 10. mm 0.8 mm 8. mm
Properties
Volume 436.8 mm³ 196.35 mm³ 4.8 mm³ 226.19 mm³
Mass 2.184e-007 dat 9.8175e-008 dat 2.4e-009 dat 1.131e-007 dat
Centroid X 30. mm -3.419 mm 4.581 mm -31.25 mm -32.709 mm
Centroid Y -53. mm -55. mm -64. mm 64.614 mm
Centroid Z 0.7 mm 5. mm 0.4 mm 4. mm
Moment of Inertia Ip1 1.2339e-005
dat·mm² 9.5874e-007 dat·mm²
3.328e-009 dat·mm²
8.4503e-007 dat·mm²
Moment of Inertia Ip2 2.6565e-006
dat·mm² 9.5874e-007 dat·mm²
5.78e-010 dat·mm²
8.4503e-007 dat·mm²
Moment of Inertia Ip3 1.4924e-005
dat·mm² 2.9986e-007 dat·mm²
3.65e-009 dat·mm²
4.9743e-007 dat·mm²
Statistics
Nodes 287 908 882 32 828
Elements 32 168 2 150
Mesh Metric None
TABLE 5 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 6. mm
Length Y 6. mm
Length Z 8. mm
Properties
Volume 226.19 mm³
Mass 1.131e-007 dat
Centroid X -44.735 mm 27.242 mm -17.584 mm -31.251 mm -22.869 mm
Centroid Y 72.085 mm 9.2189 mm -8.6389 mm 10.5 mm
Centroid Z 4. mm
Moment of Inertia Ip1 8.4503e-007 dat·mm²
Moment of Inertia Ip2 8.4503e-007 dat·mm²
Moment of Inertia Ip3 4.9743e-007 dat·mm²
Statistics
Nodes 963 828 855 828
Elements 180 150 156 150
Mesh Metric None
TABLE 6 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 6. mm 1.5 mm
Length Y 6. mm 4. mm
Length Z 8. mm 0.8 mm
Properties
Volume 226.19 mm³ 4.8 mm³
Mass 1.131e-007 dat 2.4e-009 dat
Centroid X 25.055 mm -28.25 mm -25.25 mm -22.25 mm -31.25 mm
Centroid Y 4.0248e-016 mm -64. mm -58. mm
Centroid Z 4. mm 0.4 mm
Moment of Inertia Ip1 8.4503e-007 dat·mm² 3.328e-009 dat·mm²
Moment of Inertia Ip2 8.4503e-007 dat·mm² 5.78e-010 dat·mm²
Moment of Inertia Ip3 4.9743e-007 dat·mm² 3.65e-009 dat·mm²
Statistics
Nodes 936 32
Elements 174 2
Mesh Metric None
TABLE 7 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 1.5 mm
Length Y 4. mm
Length Z 0.8 mm
Properties
Volume 4.8 mm³
Mass 2.4e-009 dat
Centroid X -28.25 mm -25.25 mm -22.25 mm -31.25 mm -28.25 mm
Centroid Y -58. mm -52. mm
Centroid Z 0.4 mm
Moment of Inertia Ip1 3.328e-009 dat·mm²
Moment of Inertia Ip2 5.78e-010 dat·mm²
Moment of Inertia Ip3 3.65e-009 dat·mm²
Statistics
Nodes 32
Elements 2
Mesh Metric None
TABLE 8 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 1.5 mm
Length Y 4. mm
Length Z 0.8 mm
Properties
Volume 4.8 mm³
Mass 2.4e-009 dat
Centroid X -25.25 mm -22.25 mm -31.25 mm -28.25 mm -25.25 mm
Centroid Y -52. mm -46. mm
Centroid Z 0.4 mm
Moment of Inertia Ip1 3.328e-009 dat·mm²
Moment of Inertia Ip2 5.78e-010 dat·mm²
Moment of Inertia Ip3 3.65e-009 dat·mm²
Statistics
Nodes 32
Elements 2
Mesh Metric None
TABLE 9 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature
By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects
Yes
Bounding Box
Length X 1.5 mm 1.8 mm 0.9618 mm 1.8 mm
Length Y 4. mm 5. mm 2.5 mm 5. mm
Length Z 0.8 mm 1.8 mm
Properties
Volume 4.8 mm³ 16.2 mm³ 4.3281 mm³ 16.2 mm³
Mass 2.4e-009 dat 8.1e-009 dat 2.1641e-009 dat 8.1e-009 dat
Centroid X -22.25 mm 23.349 mm -5.9188 mm 19.549
mm 15.749
mm
Centroid Y -46. mm -7.5 mm -74.75 mm -7.5 mm
Centroid Z 0.4 mm 0.9 mm
Moment of Inertia Ip1 3.328e-009
dat·mm² 1.9062e-008
dat·mm² 1.7114e-009
dat·mm² 1.9062e-008 dat·mm²
Moment of Inertia Ip2 5.78e-010 dat·mm²
4.374e-009 dat·mm²
7.5112e-010 dat·mm²
4.374e-009 dat·mm²
Moment of Inertia Ip3 3.65e-009 dat·mm²
1.9062e-008 dat·mm²
1.2939e-009 dat·mm²
1.9062e-008 dat·mm²
Statistics
Nodes 32 44 32 44
Elements 2 3 2 3
Mesh Metric None
TABLE 10 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 3. mm 0.9618 mm
Length Y 1. mm 2.5 mm
Length Z 1.8 mm
Properties
Volume 5.4 mm³ 4.3281 mm³
Mass 2.7e-009 dat 2.1641e-009 dat
Centroid X -16.275 mm 3.9284 mm 1.4666 mm -0.9952 mm
Centroid Y 11.778 mm 9.2784 mm -74.75 mm
Centroid Z 0.9 mm
Moment of Inertia Ip1 9.54e-010 dat·mm² 1.7114e-009 dat·mm²
Moment of Inertia Ip2 2.754e-009 dat·mm² 7.5112e-010 dat·mm²
Moment of Inertia Ip3 2.25e-009 dat·mm² 1.2939e-009 dat·mm²
Statistics
Nodes 32
Elements 2
Mesh Metric None
TABLE 11 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 0.9618 mm 9. mm
Length Y 2.5 mm 7. mm
Length Z 1.8 mm 4. mm
Properties
Volume 4.3281 mm³ 252. mm³
Mass 2.1641e-009 dat 1.26e-007 dat
Centroid X -3.457 mm -34.5 mm
Centroid Y -74.75 mm -4.78 mm
Centroid Z 0.9 mm 2. mm
Moment of Inertia Ip1 1.7114e-009 dat·mm² 6.825e-007 dat·mm²
Moment of Inertia Ip2 7.5112e-010 dat·mm² 1.0185e-006 dat·mm²
Moment of Inertia Ip3 1.2939e-009 dat·mm² 1.365e-006 dat·mm²
Statistics
Nodes 32 578
Elements 2 90
Mesh Metric None
TABLE 12 Environmental_linked (B4, C4, D4, E4) > Geometry > Body Groups
Object Name Heatsink2
State Meshed
Graphics Properties
Visible Yes
Definition
Suppressed No
Assignment Aluminum Alloy
Coordinate System Default Coordinate System
Bounding Box
Length X 32. mm
Length Y 1. mm
Length Z 14. mm
Properties
Volume 448. mm³
Mass 1.241e-007 dat
Centroid X 5. mm
Centroid Y -14.5 mm
Centroid Z 10.2 mm
Moment of Inertia Ip1 2.0372e-006 dat·mm²
Moment of Inertia Ip2 1.2616e-005 dat·mm²
Moment of Inertia Ip3 1.06e-005 dat·mm²
Statistics
Nodes 287
Elements 32
Mesh Metric None
TABLE 13 Environmental_linked (B4, C4, D4, E4) > Geometry > Heatsink2 > Parts
Object Name Heatsink2
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Aluminum Alloy
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 32. mm
Length Y 1. mm
Length Z 14. mm
Properties
Volume 448. mm³
Mass 1.241e-007 dat
Centroid X 5. mm
Centroid Y -14.5 mm
Centroid Z 10.2 mm
Moment of Inertia Ip1 2.0372e-006 dat·mm²
Moment of Inertia Ip2 1.2616e-005 dat·mm²
Moment of Inertia Ip3 1.06e-005 dat·mm²
Statistics
Nodes 287
Elements 32
Mesh Metric None
TABLE 14 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name PCB
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment PCB 2
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 100. mm
Length Y 160. mm
Length Z 2. mm
Properties
Volume 30853 mm³
Mass 2.0054e-005 dat
Centroid X -1.71 mm
Centroid Y -0.31837 mm
Centroid Z -1. mm
Moment of Inertia Ip1 4.1453e-002 dat·mm²
Moment of Inertia Ip2 1.5697e-002 dat·mm²
Moment of Inertia Ip3 5.7136e-002 dat·mm²
Statistics
Nodes 8096
Elements 3913
Mesh Metric None
TABLE 15 Environmental_linked (B4, C4, D4, E4) > Geometry > Body Groups
Object Name Solid Solid Solid Conn Solid
State Meshed
Graphics Properties
Visible Yes
Definition
Suppressed No
Assignment Silicon PlasticComposite
Coordinate System
Default Coordinate System
Bounding Box
Length X 6. mm 3.3 mm 16. mm 8. mm 2.5 mm
Length Y 6. mm 1.5 mm 4. mm
Length Z 0.8 mm 8. mm 2. mm 2.5 mm
Properties
Volume 28.8 mm³ 69.9 mm³ 47.678 mm³ 23.678 mm³ 19.635 mm³
Mass 1.44e-008 dat 5.2425e-009 dat 3.5759e-009 dat 1.7759e-009 dat 1.4726e-009 dat
Centroid X -24. mm -46.921 mm -23. mm 24.365 mm 38. mm
Centroid Y -28. mm -77. mm -80.75 mm -78. mm
Centroid Z 1.8 mm 5.3036 mm 2. mm 3. mm
Moment of Inertia 4.3968e-008 4.2349e-008 1.8503e-009 9.1288e-010 2.5034e-009
Ip1 dat·mm² dat·mm² dat·mm² dat·mm² dat·mm²
Moment of Inertia Ip2
4.3968e-008 dat·mm²
3.1575e-008 dat·mm²
7.6416e-008 dat·mm²
9.8011e-009 dat·mm²
1.1245e-009 dat·mm²
Moment of Inertia Ip3
8.64e-008 dat·mm²
1.3673e-008 dat·mm²
7.5906e-008 dat·mm²
9.5539e-009 dat·mm²
2.5034e-009 dat·mm²
Statistics
Nodes 315 543 288 486 990
Elements 36 75 30 70 189
Mesh Metric None
TABLE 16 Environmental_linked (B4, C4, D4, E4) > Geometry > Solid > Parts
Object Name Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 6. mm
Length Y 6. mm
Length Z 0.8 mm
Properties
Volume 28.8 mm³
Mass 1.44e-008 dat
Centroid X -24. mm
Centroid Y -28. mm
Centroid Z 1.8 mm
Moment of Inertia Ip1 4.3968e-008 dat·mm²
Moment of Inertia Ip2 4.3968e-008 dat·mm²
Moment of Inertia Ip3 8.64e-008 dat·mm²
Statistics
Nodes 315
Elements 36
Mesh Metric None
TABLE 17 Environmental_linked (B4, C4, D4, E4) > Geometry > Solid > Parts
Object Name Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 3.3 mm
Length Y 6. mm
Length Z 8. mm
Properties
Volume 69.9 mm³
Mass 5.2425e-009 dat
Centroid X -46.921 mm
Centroid Y -77. mm
Centroid Z 5.3036 mm
Moment of Inertia Ip1 4.4521e-008 dat·mm²
Moment of Inertia Ip2 3.1575e-008 dat·mm²
Moment of Inertia Ip3 1.8509e-008 dat·mm²
Statistics
Nodes 543
Elements 75
Mesh Metric None
TABLE 18 Environmental_linked (B4, C4, D4, E4) > Geometry > Solid > Parts
Object Name Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 16. mm
Length Y 1.5 mm
Length Z 2. mm
Properties
Volume 47.678 mm³
Mass 3.5759e-009 dat
Centroid X -23. mm
Centroid Y -80.75 mm
Centroid Z 2. mm
Moment of Inertia Ip1 1.8503e-009 dat·mm²
Moment of Inertia Ip2 7.6416e-008 dat·mm²
Moment of Inertia Ip3 7.5906e-008 dat·mm²
Statistics
Nodes 288
Elements 30
Mesh Metric None
TABLE 19 Environmental_linked (B4, C4, D4, E4) > Geometry > Conn > Parts
Object Name Conn
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 8. mm
Length Y 1.5 mm
Length Z 2. mm
Properties
Volume 23.678 mm³
Mass 1.7759e-009 dat
Centroid X 24.365 mm
Centroid Y -80.75 mm
Centroid Z 2. mm
Moment of Inertia Ip1 9.1288e-010 dat·mm²
Moment of Inertia Ip2 9.8011e-009 dat·mm²
Moment of Inertia Ip3 9.5539e-009 dat·mm²
Statistics
Nodes 486
Elements 70
Mesh Metric None
TABLE 20 Environmental_linked (B4, C4, D4, E4) > Geometry > Solid > Parts
Object Name Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 2.5 mm
Length Y 4. mm
Length Z 2.5 mm
Properties
Volume 19.635 mm³
Mass 1.4726e-009 dat
Centroid X 38. mm
Centroid Y -78. mm
Centroid Z 3. mm
Moment of Inertia Ip1 2.5034e-009 dat·mm²
Moment of Inertia Ip2 1.1245e-009 dat·mm²
Moment of Inertia Ip3 2.5034e-009 dat·mm²
Statistics
Nodes 990
Elements 189
Mesh Metric None
TABLE 21 Environmental_linked (B4, C4, D4, E4) > Geometry > Body Groups
Object Name Solid Solid
State Meshed
Graphics Properties
Visible Yes
Definition
Suppressed No
Assignment PlasticComposite Structural Steel
Coordinate System Default Coordinate System
Bounding Box
Length X 2. mm 60. mm
Length Y 20. mm 12. mm
Length Z 1.5 mm 7. mm
Properties
Volume 60. mm³ 5040. mm³
Mass 4.5e-009 dat 3.9564e-006 dat
Centroid X 36.597 mm 4.8121e-016 mm
Centroid Y -8.218 mm 74. mm
Centroid Z 2.25 mm 3.5 mm
Moment of Inertia Ip1 1.5084e-007 dat·mm² 6.3632e-005 dat·mm²
Moment of Inertia Ip2 2.3438e-009 dat·mm² 1.2031e-003 dat·mm²
Moment of Inertia Ip3 1.515e-007 dat·mm² 1.2344e-003 dat·mm²
Statistics
Nodes 104 480
Elements 8 66
Mesh Metric None
TABLE 22 Environmental_linked (B4, C4, D4, E4) > Geometry > Solid > Parts
Object Name Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 2. mm
Length Y 20. mm
Length Z 1.5 mm
Properties
Volume 60. mm³
Mass 4.5e-009 dat
Centroid X 36.597 mm
Centroid Y -8.218 mm
Centroid Z 2.25 mm
Moment of Inertia Ip1 1.5084e-007 dat·mm²
Moment of Inertia Ip2 2.3438e-009 dat·mm²
Moment of Inertia Ip3 1.515e-007 dat·mm²
Statistics
Nodes 104
Elements 8
Mesh Metric None
TABLE 23 Environmental_linked (B4, C4, D4, E4) > Geometry > Solid > Parts
Object Name Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Structural Steel
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 60. mm
Length Y 12. mm
Length Z 7. mm
Properties
Volume 5040. mm³
Mass 3.9564e-006 dat
Centroid X 4.8121e-016 mm
Centroid Y 74. mm
Centroid Z 3.5 mm
Moment of Inertia Ip1 6.3632e-005 dat·mm²
Moment of Inertia Ip2 1.2031e-003 dat·mm²
Moment of Inertia Ip3 1.2344e-003 dat·mm²
Statistics
Nodes 480
Elements 66
Mesh Metric None
TABLE 24 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid Solid Heatsink2 Heatsink2
State Meshed Suppressed Meshed
Graphics Properties
Visible Yes No Yes
Glow 0 0
Shininess 1 1
Transparency 1 1
Specularity 1 1
Definition
Suppressed No Yes No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Silicon Structural Steel Aluminum Alloy
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 17. mm 5. mm 32. mm
Length Y 35. mm 200. mm 1. mm
Length Z 1.5 mm 110. mm 14. mm
Properties
Volume 892.5 mm³ 1.1e+005 mm³ 448. mm³
Mass 4.4625e-007 dat 8.635e-005 dat 1.241e-007 dat
Centroid X -8.5 mm -33.5 mm 56.5 mm 5. mm
Centroid Y 32.5 mm 7.0555e-016 mm -17.5 mm -41.5 mm
Centroid Z 0.75 mm -5. mm 10.2 mm
Moment of Inertia Ip1 4.5638e-005 dat·mm² 0.3749 dat·mm² 2.0372e-006 dat·mm²
Moment of Inertia Ip2 1.0831e-005 dat·mm² 8.7249e-002 dat·mm² 1.2616e-005 dat·mm²
Moment of Inertia Ip3 5.6302e-005 dat·mm² 0.28801 dat·mm² 1.06e-005 dat·mm²
Statistics
Nodes 320 0 287
Elements 36 0 32
Mesh Metric None
TABLE 25 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Heatsink2 Heatsink2 Heatsink2 Heatsink2 Heatsink2
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Aluminum Alloy
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 32. mm
Length Y 1. mm
Length Z 14. mm
Properties
Volume 448. mm³
Mass 1.241e-007 dat
Centroid X 5. mm
Centroid Y -47.5 mm -50.5 mm -20.5 mm -23.5 mm -26.5 mm
Centroid Z 10.2 mm
Moment of Inertia Ip1 2.0372e-006 dat·mm²
Moment of Inertia Ip2 1.2616e-005 dat·mm²
Moment of Inertia Ip3 1.06e-005 dat·mm²
Statistics
Nodes 287
Elements 32
Mesh Metric None
TABLE 26 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Heatsink2 Heatsink2 Heatsink2 Heatsink2 Heatsink2
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment Aluminum Alloy
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 32. mm
Length Y 1. mm
Length Z 14. mm
Properties
Volume 448. mm³
Mass 1.241e-007 dat
Centroid X 5. mm
Centroid Y -29.5 mm -44.5 mm -32.5 mm -35.5 mm -38.5 mm
Centroid Z 10.2 mm
Moment of Inertia Ip1 2.0372e-006 dat·mm²
Moment of Inertia Ip2 1.2616e-005 dat·mm²
Moment of Inertia Ip3 1.06e-005 dat·mm²
Statistics
Nodes 287
Elements 32
Mesh Metric None
TABLE 27 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Heatsink2 Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature
By Environment
Material
Assignment Aluminum Alloy Silicon PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects
Yes
Bounding Box
Length X 32. mm 24. mm 8. mm 3.3 mm 28. mm
Length Y 37. mm 24. mm 4. mm 6. mm 1.5 mm
Length Z 2. mm 1.4 mm 8. mm 4. mm
Properties
Volume 2368. mm³ 806.4 mm³ 256. mm³ 69.9 mm³ 161.41 mm³
Mass 6.5594e-007 dat 4.032e-007 dat 1.92e-008 dat 5.2425e-009
dat 1.2106e-008
dat
Centroid X 5. mm -24. mm -44. mm -41.079 mm -23. mm
Centroid Y -32.5 mm -28. mm -72. mm -77. mm -79.25 mm
Centroid Z 2.2 mm 0.7 mm 4. mm 5.3036 mm 1.9959 mm
Moment of Inertia Ip1
7.505e-005 dat·mm²
1.9419e-005 dat·mm²
1.28e-007 dat·mm²
4.4521e-008 dat·mm²
1.8683e-008 dat·mm²
Moment of Inertia Ip2
5.6192e-005 dat·mm²
1.9419e-005 dat·mm²
2.048e-007 dat·mm²
3.1575e-008 dat·mm²
7.6387e-007 dat·mm²
Moment of Inertia Ip3
1.308e-004 dat·mm²
3.8707e-005 dat·mm²
1.28e-007 dat·mm²
1.8509e-008 dat·mm²
7.4973e-007 dat·mm²
Statistics
Nodes 470 315 679 543 368
Elements 56 36 108 75 38
Mesh Metric None
TABLE 28 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Conn Solid Solid Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature
By Environment
Material
Assignment PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects
Yes
Bounding Box
Length X 14. mm 6. mm 5. mm
Length Y 2. mm 4. mm 5. mm 26. mm
Length Z 4. mm 6. mm 1.5 mm
Properties
Volume 103.21 mm³ 93.735 mm³ 180. mm³ 90.15 mm³ 195. mm³
Mass 7.7411e-009
dat 7.0301e-009
dat 1.35e-008 dat
6.7612e-009 dat
1.4625e-008 dat
Centroid X 24.365 mm 38. mm 36.608 mm 36.597 mm
Centroid Y -79. mm -78. mm -73.5 mm -8.2428 mm -8.218 mm
Centroid Z 2. mm 3. mm 2.25 mm 0.75 mm
Moment of Inertia Ip1
1.3282e-008 dat·mm²
3.8146e-008 dat·mm²
6.8625e-008 dat·mm²
5.1221e-007 dat·mm²
8.2662e-007 dat·mm²
Moment of Inertia Ip2
1.2404e-007 dat·mm²
5.7431e-008 dat·mm²
8.1e-008 dat·mm²
2.5082e-008 dat·mm²
3.3211e-008 dat·mm²
Moment of Inertia Ip3
1.1592e-007 dat·mm²
3.8146e-008 dat·mm²
6.8625e-008 dat·mm²
5.3476e-007 dat·mm²
8.5434e-007 dat·mm²
Statistics
Nodes 557 699 756 414 165
Elements 76 100 125 37 16
Mesh Metric None
TABLE 29 Environmental_linked (B4, C4, D4, E4) > Geometry > Parts
Object Name Solid Solid
State Meshed
Graphics Properties
Visible Yes
Glow 0
Shininess 1
Transparency 1
Specularity 1
Definition
Suppressed No
Stiffness Behavior Flexible
Coordinate System Default Coordinate System
Reference Temperature By Environment
Material
Assignment PlasticComposite
Nonlinear Effects Yes
Thermal Strain Effects Yes
Bounding Box
Length X 50. mm
Length Y 5. mm 2. mm
Length Z 5.5 mm
Properties
Volume 955. mm³ 550. mm³
Mass 7.1625e-008 dat 4.125e-008 dat
Centroid X -0.37696 mm -3.699e-014 mm
Centroid Y 84.5 mm 81. mm
Centroid Z 2.75 mm
Moment of Inertia Ip1 3.9868e-007 dat·mm² 1.1773e-007 dat·mm²
Moment of Inertia Ip2 1.5887e-005 dat·mm² 8.6977e-006 dat·mm²
Moment of Inertia Ip3 1.5787e-005 dat·mm² 8.6075e-006 dat·mm²
Statistics
Nodes 963 222
Elements 112 22
Mesh Metric None
FIGURE 1 Environmental_linked (B4, C4, D4, E4) > Geometry > Figure
Coordinate Systems
TABLE 30 Environmental_linked (B4, C4, D4, E4) > Coordinate Systems > Coordinate System
Object Name Global Coordinate System
State Fully Defined
Definition
Type Cartesian
Ansys System Number 0.
Origin
Origin X 0. mm
Origin Y 0. mm
Origin Z 0. mm
Directional Vectors
X Axis Data [ 1. 0. 0. ]
Y Axis Data [ 0. 1. 0. ]
Z Axis Data [ 0. 0. 1. ]
Connections
TABLE 31 Environmental_linked (B4, C4, D4, E4) > Connections
Object Name Connections
State Fully Defined
Auto Detection
Generate Contact On Update Yes
Tolerance Type Slider
Tolerance Slider 0.
Tolerance Value 0.63236 mm
Face/Face Yes
Face/Edge No
Edge/Edge No
Priority Include All
Group By Bodies
Search Across Bodies
Revolute Joints Yes
Fixed Joints Yes
Transparency
Enabled Yes
TABLE 32 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact
Region 2 Contact Region
4 Contact
Region 7 Contact Region
9 Contact Region
11
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies CPU1 PowerDiss1 CPU2 PowerDiss2 PowerDiss3
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 33 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
13 Contact Region
15 Contact Region
17 Contact Region
19 Contact Region
21
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Chip2 PowerCap1 PowerCap2 Solid
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta)
Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 34 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
23 Contact Region
25 Contact Region
27 Contact Region
29 Contact Region
31
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 35 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
33 Contact Region
35 Contact Region
37 Contact Region
39 Contact Region
41
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 36 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
43 Contact Region
45 Contact Region
47 Contact Region
49 Contact Region
51
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 37 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
53 Contact Region
55 Contact Region
57 Contact Region
59 Contact Region
61
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 38 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
63 Contact Region
65 Contact Region
67 Contact Region
69 Contact Region
71
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 39 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
73 Contact Region
75 Contact Region
77 Contact Region
79 Contact Region
81
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid
Target Bodies PCB
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 40 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact
Region 83 Contact
Region 85 Contact
Region 136 Contact
Region 137 Frictional - PCB To
Solid
State Fully Defined Suppressed
Scope
Scoping Method Geometry Selection
Contact 1 Face 2 Faces
Target 1 Face No Selection
Contact Bodies Solid PCB
Target Bodies PCB Solid
Definition
Type Bonded Frictional
Scope Mode Automatic Manual
Behavior Symmetric
Trim Contact (Beta)
Program Controlled
Suppressed No
Friction Coefficient 0.2
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Program Controlled
Conductance
Pinball Region Program Controlled
Interface Treatment
Add Offset, Ramped
Effects
Offset 0.1 mm
Time Step Controls
None
TABLE 41 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
50 Contact Region
52 Contact Region
54 Contact Region
56 Contact Region
58
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies PCB Heatsink2 PCB
Target Bodies Solid Heatsink2 Solid
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 42 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
60 Contact Region
62 Contact Region
64 Contact Region
66 Contact Region
68
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face 3 Faces 1 Face
Contact Bodies PCB
Target Bodies Solid Conn Solid
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 43 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
70 Contact Region
72 Contact Region
74 Contact Region
76 Contact Region
78
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies PCB Solid Conn
Target Bodies Solid Conn
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 44 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
80 Contact Region
82 Contact Region
84 Contact Region
87 Contact Region
88
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face 2 Faces 1 Face
Target 1 Face 2 Faces 1 Face
Contact Bodies Solid Heatsink2
Target Bodies Solid Heatsink2
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 45 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
89 Contact Region
90 Contact Region
91 Contact Region
92 Contact Region
93
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Heatsink2
Target Bodies Heatsink2
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 46 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region
94 Contact Region
95 Contact Region
96 Contact Region
97 Contact Region
98
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Heatsink2
Target Bodies Heatsink2
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 47 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact
Region 99 Contact Region
100 Contact Region
101 Contact Region
86 Contact Region
103
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid CPU2 Solid
Target Bodies Solid Heatsink2 Solid
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta)
Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance
Program Controlled
Pinball Region Program Controlled
TABLE 48 Environmental_linked (B4, C4, D4, E4) > Connections > Contact Regions
Object Name Contact Region 102
State Fully Defined
Scope
Scoping Method Geometry Selection
Contact 1 Face
Target 1 Face
Contact Bodies Solid
Target Bodies Solid
Definition
Type Bonded
Scope Mode Automatic
Behavior Symmetric
Trim Contact (Beta) Program Controlled
Suppressed No
Advanced
Formulation Pure Penalty
Normal Stiffness Program Controlled
Update Stiffness Never
Thermal Conductance Program Controlled
Pinball Region Program Controlled
Mesh
TABLE 49 Environmental_linked (B4, C4, D4, E4) > Mesh
Object Name Mesh
State Solved
Defaults
Physics Preference Mechanical
Relevance 0
Sizing
Use Advanced Size Function Off
Relevance Center Coarse
Element Size Default
Initial Size Seed Active Assembly
Smoothing Medium
Transition Fast
Span Angle Center Coarse
Minimum Edge Length 0.78540 mm
Inflation
Use Automatic Tet Inflation None
Inflation Option Smooth Transition
Transition Ratio 0.272
Maximum Layers 5
Growth Rate 1.2
Inflation Algorithm Pre
View Advanced Options No
Advanced
Shape Checking Standard Mechanical
Element Midside Nodes Program Controlled
Straight Sided Elements No
Number of Retries Default (4)
Rigid Body Behavior Dimensionally Reduced
Mesh Morphing Disabled
Pinch
Pinch Tolerance Please Define
Generate on Refresh No
Statistics
Nodes 34918
Elements 7916
Mesh Metric None
TABLE 50 Environmental_linked (B4, C4, D4, E4) > Mesh > Mesh Controls
Object Name Sweep Method 2 Body Sizing Body Sizing 3 Sweep Method 3
State Fully Defined
Scope
Scoping Method Geometry Selection
Geometry 1 Body 26 Bodies 76 Bodies
Definition
Suppressed No
Method Sweep Sweep
Element Midside Nodes Dropped Use Global Setting
Src/Trg Selection Automatic Thin Automatic
Source Program Controlled Program Controlled
Free Face Mesh Type Quad/Tri Quad/Tri
Sweep Num Divs Default Default
Element Option Solid Shell Solid Shell
Type Element Size Number of Divisions
Element Size 2. mm
Behavior Soft
Target Program Controlled
Sweep Bias Type No Bias
FIGURE 2 Environmental_linked (B4, C4, D4, E4) > Mesh > Figure
Named Selections
TABLE 51 Environmental_linked (B4, C4, D4, E4) > Named Selections > Named Selections
Object Name FixedSupport
State Fully Defined
Definition
Send to Solver Yes
Visible Yes
Scope
Geometry 10 Faces
Statistics
Type Manual
Total Selection 10 Faces
Suppressed 0
Hidden 0
Steady-State Thermal (B5)
TABLE 52 Environmental_linked (B4, C4, D4, E4) > Analysis
Object Name Steady-State Thermal (B5)
State Solved
Definition
Physics Type Thermal
Analysis Type Steady-State
Solver Target ANSYS Mechanical
Options
Generate Input Only No
TABLE 53 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Initial Condition
Object Name Initial Condition
State Fully Defined
Definition
Initial Temperature Uniform Temperature
Initial Temperature Value 22. °C
TABLE 54 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Step Controls
Number Of Steps 1.
Current Step Number 1.
Step End Time 1. s
Auto Time Stepping Program Controlled
Solver Controls
Solver Type Program Controlled
Radiosity Controls
Flux Convergence 1.e-004
Maximum Iteration 1000.
Solver Tolerance 0.1
Over Relaxation 0.1
Hemicube Resolution 10.
Nonlinear Controls
Heat Convergence Program Controlled
Temperature Convergence Program Controlled
Line Search Program Controlled
Output Controls
Calculate Thermal Flux Yes
Calculate Results At All Time Points
Cache Results in Memory (Beta) Never
Analysis Data Management
Solver Files Directory D:\V12\GC\Graphic Card 12_files\dp0\SYS-1\MECH\
Future Analysis None
Scratch Solver Files Directory
Save ANSYS db No
Delete Unneeded Files Yes
Nonlinear Solution No
Solver Units Active System
Solver Unit System nmm
TABLE 55 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Loads
Object Name Temperature 2
State Suppressed
Scope
Scoping Method Geometry Selection
Geometry 77 Bodies
Apply To Entire Body
Definition
ID (Beta) 44222
Type CFX Temperature
CFD Surface Default Fluid Solid Interface Side 1 1
CFX Time value 0. s
CFD Results File G:\Save Files\Temp_tobemovedback\Graphic_Card\Graphic_Card_PCB3_001.res
Suppressed Yes
Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Temperature 2 > CFD Load Transfer Summary
An error occurred while transferring loads/supports/contacts: CFX Pressure load was not created.
Please check the existence of the correspondent CFX results file.
TABLE 56 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Imported Load (Solution 4)
Object Name Imported Load (Solution 4)
State Fully Defined
Definition
Type Imported Data
Interpolation Type CFD Results Interpolator
Suppressed No
TABLE 57 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Imported Load (Solution 4) >
Imported Temperature
Object Name Imported Temperature
State Solved
Scope
Scoping Method Geometry Selection
Geometry 485 Faces
Definition
Type Imported Temperature
Suppressed No
Beta Options (Beta)
Show Body Wireframe (Beta)
No
Transfer Definition
CFD Surface Default Fluid Solid Interface Side 1 1
CFD Data
CFD Results File D:\V12\GC\Graphic Card 12_files\dp0\SYS-1\MECH\Solution
4\Graphic_Card_PCB3_001.res
Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Imported Load (Solution 4) > Imported Temperature > Imported Load Transfer Summary
CFD Load Transfer Summary
CFD Computed Temperature Data from CFD Results File D:\Graphic_Card_D\Graphic Card
12_files\dp0\SYS-1\MECH\Solution 4\Graphic_Card_PCB3_001.res Average Temperature = 48.334 °C
Mechanical Mapped Temperature Data for Mechanical Surface File
D:\Graphic_Card_D\Graphic Card 12_files\dp0\SYS-1\MECH\Import_ANSYS_47367.cdb Average Temperature = 49.337 °C
94% of Mechanical nodes were mapped to the CFD surface, remaining nodes mapped to closest
edge or node.
Solution (B6)
TABLE 58 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Solution
Object Name Solution (B6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 1.
Refinement Depth 2.
TABLE 59 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Solution (B6) > Solution
Information
Object Name Solution Information
State Solved
Solution Information
Solution Output Solver Output
Update Interval 2.5 s
Display Points All
TABLE 60 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Solution (B6) > Results
Object Name Temperature
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Temperature
By Time
Display Time Last
Calculate Time History Yes
Identifier
Results
Minimum 29.135 °C
Maximum 102.39 °C
Minimum Occurs On Heatsink2
Maximum Occurs On CPU2
Information
Time 1. s
Load Step 1
Substep 1
Iteration Number 1
FIGURE 3 Environmental_linked (B4, C4, D4, E4) > Steady-State Thermal (B5) > Solution (B6) > Temperature
> Figure
Static Structural (C5)
TABLE 61 Environmental_linked (B4, C4, D4, E4) > Analysis
Object Name Static Structural (C5)
State Solved
Definition
Physics Type Structural
Analysis Type Static Structural
Solver Target ANSYS Mechanical
Options
Environment Temperature 22. °C
Generate Input Only No
TABLE 62 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Step Controls
Number Of Steps 1.
Current Step Number 1.
Step End Time 1. s
Auto Time Stepping Program Controlled
Solver Controls
Solver Type Program Controlled
Weak Springs Program Controlled
Large Deflection Off
Inertia Relief Off
Nonlinear Controls
Force Convergence Program Controlled
Moment Convergence Program Controlled
Displacement Convergence Program Controlled
Rotation Convergence Program Controlled
Line Search Program Controlled
Output Controls
Calculate Stress Yes
Calculate Strain Yes
Calculate Results At All Time Points
Cache Results in Memory (Beta) Never
Analysis Data Management
Solver Files Directory D:\V12\GC\Graphic Card 12_files\dp0\SYS-2\MECH\
Future Analysis Prestressed analysis
Scratch Solver Files Directory
Save ANSYS db Yes
Delete Unneeded Files Yes
Nonlinear Solution Yes
Solver Units Active System
Solver Unit System nmm
TABLE 63 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Loads
Object Name Fixed Support
State Fully Defined
Scope
Scoping Method Named Selection
Named Selection FixedSupport
Definition
ID (Beta) 29176
Type Fixed Support
Suppressed No
FIGURE 4 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Fixed Support > Figure
TABLE 64 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Imported Load (Thermal
Condition)
Object Name Imported Load (Thermal Condition)
State Fully Defined
Definition
Type Imported Data
Interpolation Type Mechanical Results Transfer
Suppressed No
TABLE 65 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Imported Load (Thermal
Condition) > Imported Body Temperature
Object Name Imported Body Temperature
State Solved
Scope
Scoping Method Geometry Selection
Geometry 77 Bodies
Definition
Type Imported Body Temperature
Suppressed No
Source Environment Steady-State Thermal (B5)
Beta Options (Beta)
Show Body Wireframe (Beta) No
Solution (C6)
TABLE 66 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution
Object Name Solution (C6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 1.
Refinement Depth 2.
TABLE 67 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Solution
Information
Object Name Solution Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Update Interval 2.5 s
Display Points All
TABLE 68 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Results
Object Name Total
Deformation Equivalent (von-Mises)
Stress - All Bodies Equivalent (von-
Mises) Stress - PCB Equivalent Plastic Strain - All Bodies
State Solved
Scope
Scoping Method
Geometry Selection
Geometry All Bodies 1 Body All Bodies
Definition
Type Total
Deformation Equivalent (von-Mises) Stress
Equivalent Plastic Strain
By Time
Display Time Last
Calculate Time History
Yes
Identifier
Use Average Yes
Results
Minimum 0. mm 7.2324e-005 hbar 5.4785e-003 hbar 0. mm/mm
Maximum 0.31664 mm 36.137 hbar 16.197 hbar 9.4383e-004 mm/mm
Minimum Occurs On
PCB Solid PCB
Maximum Occurs On
PCB CPU2 PCB
Minimum Value Over Time
Minimum 0. mm 1.4482e-005 hbar 1.0957e-003 hbar 0. mm/mm
Maximum 0. mm 7.2324e-005 hbar 5.4785e-003 hbar 0. mm/mm
Maximum Value Over Time
Minimum 6.2016e-002
mm 7.2231 hbar 5.725 hbar 0. mm/mm
Maximum 0.31664 mm 36.137 hbar 16.197 hbar 9.4383e-004 mm/mm
Information
Time 1. s
Load Step 1
Substep 4
Iteration Number
5
FIGURE 5 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Total Deformation
TABLE 69 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Total Deformation
Time [s] Minimum [mm] Maximum [mm]
0.2
0.
6.2016e-002
0.4 0.12397
0.7 0.21763
1. 0.31664
FIGURE 6 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Total Deformation
> Figure
FIGURE 7 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent (von-
Mises) Stress - All Bodies
TABLE 70 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent (von-
Mises) Stress - All Bodies
Time [s] Minimum [hbar] Maximum [hbar]
0.2 1.4482e-005 7.2231
0.4 2.8963e-005 14.447
0.7 5.0679e-005 25.283
1. 7.2324e-005 36.137
FIGURE 8 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent (von-
Mises) Stress - All Bodies > Figure
FIGURE 9 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent (von-
Mises) Stress - PCB
TABLE 71 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent (von-
Mises) Stress - PCB
Time [s] Minimum [hbar] Maximum [hbar]
0.2 1.0957e-003 5.725
0.4 2.1913e-003 11.451
0.7 3.8346e-003 15.047
1. 5.4785e-003 16.197
FIGURE 10 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent (von-
Mises) Stress - PCB > Figure
FIGURE 11 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent Plastic
Strain - All Bodies
TABLE 72 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent Plastic
Strain - All Bodies
Time [s] Minimum [mm/mm] Maximum [mm/mm]
0.2
0.
0. 0.4
0.7 2.5361e-004
1. 9.4383e-004
FIGURE 12 Environmental_linked (B4, C4, D4, E4) > Static Structural (C5) > Solution (C6) > Equivalent Plastic
Strain - All Bodies > Figure
Modal (D5)
TABLE 73 Environmental_linked (B4, C4, D4, E4) > Analysis
Object Name Modal (D5)
State Solved
Definition
Physics Type Structural
Analysis Type Modal
Solver Target ANSYS Mechanical
Options
Generate Input Only No
TABLE 74 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Initial Condition
Object Name Initial Condition
State Fully Defined
Definition
Pre-Stress Environment Static Structural
TABLE 75 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Options
Max Modes to Find 12
Limit Search to Range No
Solver Controls
Solver Type Program Controlled
Output Controls
Calculate Stress Yes
Calculate Strain Yes
Cache Results in Memory (Beta) Never
Analysis Data Management
Solver Files Directory D:\V12\GC\Graphic Card 12_files\dp0\SYS-3\MECH\
Future Analysis PSD/RS Analyses
Scratch Solver Files Directory
Save ANSYS db Yes
Delete Unneeded Files Yes
Solver Units Active System
Solver Unit System nmm
Solution (D6)
TABLE 76 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution
Object Name Solution (D6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 1.
Refinement Depth 2.
The following bar chart indicates the frequency at each calculated mode.
FIGURE 13 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6)
TABLE 77 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6)
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
TABLE 78 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Solution Information
Object Name Solution Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Update Interval 2.5 s
Display Points All
TABLE 79 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Results
Object Name Total
Deformation Total
Deformation 2 Total
Deformation 3 Total
Deformation 4 Total
Deformation 5
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Total Deformation
Mode 1. 2. 3. 4. 5.
Identifier
Results
Minimum 0. mm
Maximum 123.84 mm 171.36 mm 167.57 mm 208.87 mm 283.88 mm
Minimum Occurs On
PCB
Maximum Occurs On
PCB Solid PCB
Information
Reported Frequency
153.72 Hz 279.79 Hz 592.3 Hz 1084.9 Hz 1119.4 Hz
TABLE 80 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 14 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation > Figure
TABLE 81 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 2
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 15 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 2 > Figure
TABLE 82 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 3
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 16 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 3 > Figure
TABLE 83 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 4
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 17 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 4 > Figure
TABLE 84 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 5
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 18 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 5 > Figure
TABLE 85 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Results
Object Name Total
Deformation 6 Total
Deformation 7 Total
Deformation 8 Total
Deformation 9 Total
Deformation 10
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Total Deformation
Mode 6. 7. 8. 9. 10.
Identifier
Results
Minimum 0. mm
Maximum 264.1 mm 291.04 mm 399.25 mm 253.63 mm 749.58 mm
Minimum Occurs On
PCB
Maximum Occurs On
Solid Heatsink2 PCB Heatsink2
Information
Reported Frequency
1638.8 Hz 1688.7 Hz 2225.6 Hz 2548.6 Hz 2843.9 Hz
TABLE 86 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 6
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 19 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 6 > Figure
TABLE 87 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 7
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 20 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 7 > Figure
TABLE 88 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 8
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 21 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 8 > Figure
TABLE 89 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 9
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 22 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 9 > Figure
TABLE 90 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 10
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 23 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 10 >
Figure
TABLE 91 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Results
Object Name Total Deformation 11 Total Deformation 12
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies
Definition
Type Total Deformation
Mode 11. 12.
Identifier
Results
Minimum 0. mm
Maximum 473.95 mm 517.7 mm
Minimum Occurs On PCB
Maximum Occurs On Heatsink2
Information
Reported Frequency 2880.2 Hz 3227.1 Hz
TABLE 92 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 11
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 24 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 11 >
Figure
TABLE 93 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 12
Mode Frequency [Hz]
1. 153.72
2. 279.79
3. 592.3
4. 1084.9
5. 1119.4
6. 1638.8
7. 1688.7
8. 2225.6
9. 2548.6
10. 2843.9
11. 2880.2
12. 3227.1
FIGURE 25 Environmental_linked (B4, C4, D4, E4) > Modal (D5) > Solution (D6) > Total Deformation 12 >
Figure
Random Vibration (E5)
TABLE 94 Environmental_linked (B4, C4, D4, E4) > Analysis
Object Name Random Vibration (E5)
State Solved
Definition
Physics Type Structural
Analysis Type Random Vibration
Solver Target ANSYS Mechanical
Options
Environment Temperature 22. °C
Generate Input Only No
TABLE 95 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Initial Condition
Object Name Initial Condition
State Fully Defined
Definition
Modal Environment Modal
TABLE 96 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Analysis Settings
Object Name Analysis Settings
State Fully Defined
Options
Number Of Modes To Use All
Exclude Insignificant Modes No
Damping Controls
Constant Damping Ratio 0.
Beta Damping Define By Direct Input
Beta Damping Value 0.
Analysis Data Management
Solver Files Directory D:\V12\GC\Graphic Card 12_files\dp0\SYS-4\MECH\
Future Analysis None
Scratch Solver Files Directory
Save ANSYS db No
Delete Unneeded Files Yes
Solver Units Active System
Solver Unit System nmm
TABLE 97 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Loads
Object Name PSD Base Excitation
State Fully Defined
Scope
Boundary Condition All Fixed Supports
Definition
Load Data PSD G Acceleration vs. Frequency
Direction Z Axis
Suppressed No
FIGURE 26 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > PSD Base Excitation
TABLE 98 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > PSD Base Excitation
Frequency [Hz] G Acceleration [G²/Hz]
50. 0.25
100. 1.
1000.
2000. 0.25
Solution (E6)
TABLE 99 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Solution
Object Name Solution (E6)
State Solved
Adaptive Mesh Refinement
Max Refinement Loops 1.
Refinement Depth 2.
TABLE 100 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Solution (E6) > Solution
Information
Object Name Solution Information
State Solved
Solution Information
Solution Output Solver Output
Newton-Raphson Residuals 0
Update Interval 2.5 s
Display Points All
TABLE 101 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Solution (E6) > Results
Object Name Directional
Deformation Directional
Velocity Directional
Acceleration Equivalent
Stress
State Solved
Scope
Scoping Method Geometry Selection
Geometry All Bodies 1 Body
Definition
Type Directional
Deformation Directional
Velocity Directional
Acceleration Equivalent
Stress
Orientation Z Axis
Reference Relative to base
motion Absolute (including base motion)
Scale Factor 1 Sigma
Probability 68.3 %
Coordinate System Solution Coordinate System
Use Average Yes
Results
Minimum 0. mm 186.74 mm/s 3.6989e+005 mm/s² 0. hbar
Maximum 2.1433 mm 2093.2 mm/s 5.0231e+006 mm/s² 53.157 hbar
Minimum Occurs On
PCB
Maximum Occurs On
PCB
Information
Time 0. s
Load Step 3 4 5 3
Substep 1
Iteration Number 1 2 3 1
Options
Acceleration in G No
FIGURE 27 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Solution (E6) > Directional
Deformation > Figure
FIGURE 28 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Solution (E6) > Directional
Velocity > Figure
FIGURE 29 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Solution (E6) > Directional
Acceleration > Figure
FIGURE 30 Environmental_linked (B4, C4, D4, E4) > Random Vibration (E5) > Solution (E6) > Equivalent
Stress > Figure
Material Data
Silicon
TABLE 102 Silicon > Constants
Density 5.e-010 decatonne mm^-3
Coefficient of Thermal Expansion 2.99e-006 C^-1
Specific Heat 3.e+009 mJ decatonne^-1 C^-1
Thermal Conductivity 3.e-003 W mm^-1 C^-1
TABLE 103 Silicon > Isotropic Elasticity
Temperature C Young's Modulus hbar Poisson's Ratio
16272 0.28
Aluminum Alloy
TABLE 104 Aluminum Alloy > Constants
Compressive Ultimate Strength 0 hbar
Compressive Yield Strength 28 hbar
Density 2.77e-010 decatonne mm^-3
Tensile Yield Strength 28 hbar
Tensile Ultimate Strength 31 hbar
Coefficient of Thermal Expansion 2.3e-005 C^-1
Specific Heat 8.75e+009 mJ decatonne^-1 C^-1
Resistivity 5.7e-005 ohm mm
TABLE 105 Aluminum Alloy > Thermal Conductivity
Thermal Conductivity W mm^-1 C^-1 Temperature C
0.114 -100
0.144 0
0.165 100
0.175 200
TABLE 106 Aluminum Alloy > Alternating Stress
Alternating Stress hbar Cycles R-Ratio
27.58 1700 -1
24.13 5000 -1
20.68 34000 -1
17.24 1.4e+005 -1
13.79 8.e+005 -1
11.72 2.4e+006 -1
8.963 5.5e+007 -1
8.274 1.e+008 -1
17.06 50000 -0.5
13.96 3.5e+005 -0.5
10.86 3.7e+006 -0.5
8.791 1.4e+007 -0.5
7.757 5.e+007 -0.5
7.239 1.e+008 -0.5
14.48 50000 0
12.07 1.9e+005 0
10.34 1.3e+006 0
9.308 4.4e+006 0
8.618 1.2e+007 0
7.239 1.e+008 0
7.412 3.e+005 0.5
7.067 1.5e+006 0.5
6.636 1.2e+007 0.5
6.205 1.e+008 0.5
TABLE 107 Aluminum Alloy > Relative Permeability
Relative Permeability
1
TABLE 108 Aluminum Alloy > Isotropic Elasticity
Temperature C Young's Modulus hbar Poisson's Ratio
7100 0.33
PCB 2
TABLE 109 PCB 2 > Constants
Density 6.5e-010 decatonne mm^-3
Coefficient of Thermal Expansion 1.6e-005 C^-1
Specific Heat 6.5e+009 mJ decatonne^-1 C^-1
Thermal Conductivity 1.e-003 W mm^-1 C^-1
TABLE 110 PCB 2 > Bilinear Isotropic Hardening
Yield Strength hbar Tangent Modulus hbar
15 90
TABLE 111 PCB 2 > Isotropic Elasticity
Temperature C Young's Modulus hbar Poisson's Ratio
21045 0.3
PlasticComposite
TABLE 112 PlasticComposite > Constants
Density 7.5e-011 decatonne mm^-3
Coefficient of Thermal Expansion 1.58e-005 C^-1
Specific Heat 5.e+009 mJ decatonne^-1 C^-1
Thermal Conductivity 7.e-004 W mm^-1 C^-1
TABLE 113 PlasticComposite > Isotropic Elasticity
Temperature C Young's Modulus hbar Poisson's Ratio
1580 0.25
Structural Steel
TABLE 114 Structural Steel > Constants
Compressive Ultimate Strength 0 hbar
Compressive Yield Strength 25 hbar
Density 7.85e-010 decatonne mm^-3
Tensile Yield Strength 25 hbar
Tensile Ultimate Strength 46 hbar
Coefficient of Thermal Expansion 1.2e-005 C^-1
Specific Heat 4.34e+009 mJ decatonne^-1 C^-1
Thermal Conductivity 6.05e-002 W mm^-1 C^-1
Resistivity 1.7e-004 ohm mm
TABLE 115 Structural Steel > Alternating Stress
Alternating Stress hbar Cycles Mean Stress hbar
399.9 10 0
282.7 20 0
189.6 50 0
141.3 100 0
106.9 200 0
44.1 2000 0
26.2 10000 0
21.4 20000 0
13.8 1.e+005 0
11.4 2.e+005 0
8.62 1.e+006 0
TABLE 116 Structural Steel > Strain-Life Parameters
Strength Coefficient hbar
Strength Exponent
Ductility Coefficient
Ductility Exponent
Cyclic Strength Coefficient hbar
Cyclic Strain Hardening Exponent
92 -0.106 0.213 -0.47 100 0.2
TABLE 117 Structural Steel > Relative Permeability
Relative Permeability
10000
TABLE 118 Structural Steel > Isotropic Elasticity
Temperature C Young's Modulus hbar Poisson's Ratio
20000 0.3