production range pumps - ar-pol · 2012-08-02 · asme b73.3. 6 7 modular system the modular system...
TRANSCRIPT
SERVICE
S E R V I C E
KU-Logo für farbigen HG
KLAUS UNION GmbH & Co. KG
Blumenfeldstr. 1844795 BochumGermany
KU
_GP
_EN
G_1
0/11
_000
1
Phone +49 234 45 95 - 0Fax +49 234 45 95 - 7000
E-Mail [email protected] www.klaus-union.de
PUMPSCOMPLETE PRODUCT RANGEMAGNET DRIVE & SHAFE SEAL PUMP
Pumps with shaft sealing
E Centrifugal pumps according to DIN EN 22858
E Multistage pumps, tension-rod or barrel-type constructionE Horizontal and vertical propeller pumpsE Bottom-flange propeller pumpsE Submerged centrifugal pumpsE Double-suction chemical pumps
Production rangevalves:
E Valves, T-patternE Valves, Y-patternE Gate valves, isomorphous
construction seriesE Gate valves, wedge or wedge platesE Relief valvesE Check valvesE Sight glassesE StrainersE FiltersE Bottom valves
Production range pumps:
Pumps with magnet drive
E Centrifugal pumps according to DIN EN 22858
E Centrifugal pumps according to ANSI B73.3
E Centrifugal pumps for refinery and petrochemical applications according to API 685
E Centrifugal pumps for high pressure applications
E Centrifugal pumps for high temperature applications
E Centrifugal pumps for liquid containing solids
E Centrifugal pumps, self-primingE Multistage pumps, tension-rod or barrel-type constructionE Side channel pumps, self-primingE Screw pumpsE Submerged centrifugal pumpsE Double suction centrifugal pumpsE Plastic-lined pumps
KLAUS UNION GmbH – Experience, responsibility and passion
Best materials – Highest quality
Our excellently structured product range covers pumps and valves for almost every branch of industry. They are used e.g. in refrigeration and heat engineering, in power stations, liquid gas plants and in galvanic engineering. Corrosion-resistant materials such as nickel-based and titanium-based alloys therefore form the basis of all products, alongside steel and stainless steel. A sophisticated quality management system guarantees the highest degree of safety. Customers around the world trust our products from Bochum and rely on our comprehensive service providing onsite or telephone advice and support around the clock. Our range of services is constantly expanding as a result of the active exchange with our customers. This branch of the company has therefore been specially sectioned off to form KLAUS UNION SERVICE GmbH, in order to further increase efficiency.
Further information about Klaus Union and our products can be accessed on our homepage:www.klaus-union.de
Extreme requirements are our standard
Founded in 1946 in Bochum Germany, and with its six decades of experience, numerous patents and a multitude of products, KLAUS UNION is today one of the leading suppliers of pumps and valves. Since many of our global customers are from the chemical and petrochemical industries, particularly high requirements are placed on all products. This is because there can be no compromise on quality, working life or safety when it comes to pumping aggressive, toxic and explosive media. Our products are thus a guarantee of constant operational readiness and protection of both people and the environment.
Innovations for greater safety
In the early 1950s, KLAUS UNION had already developed the world’s first magnet drive, which was introduced in 1955 at the ACHE-MA in Frankfurt, and which is still amongst the safest sealing systems to this day. Fur-ther trendsetting developments followed, such as the first titanium pump manufactured in Europe, or entirely new magnet systems.
2 3
Quality assurance
A major component of our Company ethos is to ensure the highest quality of our products. Existing quality assurance procedures with our suppliers are constantly monitored from order placement, goods inward through to fi-nal assembly. This quality assurance system, developed on modern principles, complies with the requirements of international regulations.
KLAUS UNION and its products are certified according to:
E DIN EN ISO 9001E EC Pressure Equipment Directive
RL97/23ECE Machinery Directive RL2006/42/ECE Explosion Protection Directive RL94/9/
EC (“ATEX Directive”, equipment category 2 for use in explosion protection zone 1, II2GcT4)
E GOST RE RostekhnadzorE Certification for Belarus:
Gospromnadzor
4 5
Overview
SLM NV p. 08
Magnet drive single-stage centrifugal pump according to DIN EN ISO 22858 / ISO 2858 and DIN EN ISO 15783
NOV p. 22
Single-stage centrifugal pump with shaft sealing according to DIN EN ISO 5199
SLM GV p. 16
Magnet drive multi-stage centrifugal pump based on DIN EN ISO 15783
SLM LV p. 20
Magnet drive screw pump
GOV p. 24
Multi-stage centrifugal pump with shaft sealing according to DIN EN ISO 5199
P p. 28
Single-stage propeller pump with shaft sealing
SLM SV p. 14
Magnet drive multi-stage side channel pump based on DIN EN ISO 15783
SLM NVT p. 18
Magnet drive single-stage submerged pump according to DIN EN ISO 15783
TP NO p. 26
Single-stage submerged pump with shaft sealing according to DIN EN ISO 5199
Customized solutions p. 30
We are glad to develop special solutions for your individual requirements.
Materials p. 31
Here you can find a selection of the materials we use.
SLM AVP p. 12
Magnet drive single-stage centrifugal pump according to API 685
SLM AV p. 10
Magnet drive single-stage centrifugal pump according to ASME B73.3
6 7
Modular system
The modular system allows combining suitable modules to meet the particular requirements of your specific application. The following illustrations show a few examples – but only some out of the many variations available.
Talk to us about your specific application. We will show you how “your” pump might look.
The variable modular system allows any combination of modules to meet the individual requirements of your application.
Any combination is possible!
SLM NV – The modular system that makes everything possible
Fig.: Explosion drawing SLM NV
Magnet drive single-stage centrifugal pump SLM NV according to DIN EN ISO 22858 / ISO 2858 and DIN EN ISO 15783
8 9
Fig. 1. Magnet drive centrifugal pump SLM NV, oil-lubricated
Applications
Sectors
E Chemical and petrochemical industriesE Refrigeration and heat engineeringE RefineriesE Liquid gas plantsE Power engineeringE Tank installations
Pumping of
E AcidsE LyesE HydrocarbonsE Heat transfer liquidsE CoolantsE Liquid gasesE Aggressive, explosive and
toxic liquidsE Liquids containing solidsE High-viscosity liquids
Technical data
Standard design
Flow rate: up to 2,600 m³/hDelivery head: up to 200 m L.C.Temperature range: -30 °C to +250 °CPressure rating: PN 16 at 120 °C
Materials: Steel, stainless steel Customized solutions
Flow rate: up to 3,500 m³/hDelivery head: up to 220 m L.C.Temperature range: -120 °C to +450 °CPressure rating: up to PN 400
Materials: Nickel-based materials, titanium
Construction
E Single-stage, horizontal centrifugal pump in process construction
E Hydraulic performance and dimensions according to DIN EN 22858 and ISO 2858
E Technical design according to DIN EN ISO 15783
E Permanent magnet drive – maintenance-free – no shaft duct – separation of liquid chamber /
atmosphere by means of isolation shell – slipless power transferE Bearing bracket with oil or grease-
lubricated anti-friction bearings; optional: close-coupled design
E Product-lubricated journal bearings; made from silicon carbide (SSiC); further bearing materials upon request
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
Fig. 2. 3-D cross-section of magnet drive centrifugal pump SLM
NV, oil-lubricated
10 11
Magnet drive centrifugal pump SLM AV according to ASME B73.3
Applications
Sectors
E Chemical and petrochemical industriesE Power engineeringE RefineriesE Liquid gas plantsE Tank installationsE Refrigeration and heat engineering
Pumping of
E AcidsE LyesE HydrocarbonsE Aggressive, explosive and
toxic liquidsE Liquid gasesE Heat transfer liquidsE CoolantsE Liquids containing solidsE High-viscosity liquids
Technical data
Standard design
Flow rate: up to 200 m³/hDelivery head: up to 130 m L.C.Temperature range: -30 °C to +250 °CPressure rating: PN 16 at 120° C
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 3,500 m³/hDelivery head: up to 220 m L.C.Temperature range: -120 °C to +450 °CPressure rating: up to PN 400
Materials: Nickel-based materials, titanium
Construction
E Single-stage, horizontal centrifugal pump in process construction
E Hydraulic performance and dimensions according to ASME B73.3
E Permanent magnet drive – maintenance-free – no shaft duct – separation of liquid chamber /
atmosphere by means of isolation shell – slipless power transferE Bearing bracket with oil or grease-
lubricated anti-friction bearings; optional: close-coupled design
E Product-lubricated journal bearings; made from silicon carbide (SSiC); further bearing materials upon request
Fig. 1. Magnet drive centrifugal pump SLM AVO, oil-lubricated
Fig. 2. 3-D cross-section of magnet drive centrifugal pump SLM
AVO, oil-lubricated
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
12 13
Fig. 1. Magnet drive centrifugal pump SLM AVP
Applications
Sectors
E RefineriesE Tank installationsE Chemical and petrochemical industriesE Refrigeration and heat engineeringE Liquid gas plantsE Power engineeringE On-/offshore plants
Pumping of
E HydrocarbonsE Liquid gasesE Aggressive, explosive and
toxic liquidsE Heat transfer liquidsE CoolantsE AcidsE Lyes
Technical data
Standard design
Flow rate: up to 2,600 m³/hDelivery head: up to 200 m L.C.Temperature range: -30 °C to +350 °CPressure rating: PN 40 at 120° C
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 3,500 m³/hDelivery head: up to 220 m L.C.Temperature range: -120 °C to +450 °CPressure rating: up to PN 400
Flanges according to ANSI / ASME B16,5, Class 150 (PN 20), Class 300 (PN 50)
Materials: Nickel-based materials, titanium
Construction
E Single-stage, horizontal centrifugal pump in process construction, heavy-duty design
E Hydraulic performance and dimensions in accordance with ASME B73.3
E Technical design according to API 685E Permanent magnet drive – maintenance-free – no shaft duct – separation of liquid chamber /
atmosphere by means of isolation shell – slipless power transferE Bearing bracket with oil-lubricated
anti-friction bearingsE Centreline supportE Product-lubricated journal bearings;
made from silicon carbide (SSiC); further bearing materials upon request
Magnet drive centrifugal pump SLM AVP according to API 685
Fig. 2. 3-D cross-section of magnet drive centrifugal pump
SLM AVP
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
Magnet drive side channel pump SLM SV
14 15
Fig. 1. Magnet drive side channel pump SLM SV, grease-lubricated
Applications
Sectors
E Chemical and petrochemical industriesE Refrigeration engineeringE Liquid gas plantsE Tank installationsE Vacuum technology
Pumping of
E AcidsE LyesE HydrocarbonsE SolventsE Liquid gasesE Refrigerants
Technical data
Standard design
Flow rate: up to 42 m³/hDelivery head: up to 470 m L.C.Temperature range: -30 °C to +150 °CPressure rating: PN 40 at 120 °C
Materials: stainless steel Customized solutions
Flow rate: up to 42 m³/hDelivery head: up to 470 m L.C.Temperature range: -120 °C to +250 °CPressure rating: up to PN 400
Construction
E Multi-stage, horizontal side channel pump in process construction
E Technical design based on DIN EN ISO 15783
E Maximum number of stages: 8E Self-primingE Barrel-housing design with just
two gasketsE Gas handlingE First low- NPSH stage for improved suction performanceE Permanent magnet drive – maintenance-free – no shaft duct – separation of liquid chamber /
atmosphere by means of isolation shell – slipless power transferE Bearing bracket with oil or grease-
lubricated anti-friction bearings; optional: close-coupled design
E Product-lubricated journal bearings; made from silicon carbide (SSiC); further bearing materials upon request
Fig. 2. 3-D cross-section of magnet drive centrifugal pump SLM SV,
oil-lubricated
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
16 17
Multi-stage magnet drive centrifugal pump SLM GV
Applications
Sectors
E Chemical and petrochemical industriesE RefineriesE Refrigeration and heat engineeringE Liquid gas plantsE Tank installationsE Power engineering
Pumping of
E AcidsE LyesE HydrocarbonsE Hot waterE Heat transfer liquidsE Liquid gasesE Aggressive, explosive and
toxic liquids
Technical data
Standard design
Flow rate: up to 300 m³/hDelivery head: up to 600 m L.C.Temperature range: -30 °C to +250 °CPressure rating: PN 63 at 120 °C
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 350 m³/hDelivery head: up to 700 m L.C.Temperature range: -120 °C to +350 °CPressure rating: up to PN 200
Construction
E Multi-stage, horizontal centrifugal pump in process construction
E Technical design based on DIN EN ISO 15783
E Impeller arrangement in series; Maximum number of stages: 6
E First low- NPSH stage for improved suction performanceE Barrel-housing design with just
two gasketsE Centreline supportE Permanent magnet drive – maintenance-free – no shaft duct – separation of liquid chamber /
atmosphere by means of isolation shell – slipless power transferE Bearing bracket with oil or grease-
lubricated anti-friction bearings; optional: close-coupled design
E Product-lubricated journal bearings; made from silicon carbide (SSiC); further bearing materials upon request
E Designs: barrel-housing design or sectional design
Fig. 2. 3-D cross-section of multi-stage magnet drive
centrifugal pump SLM GV, oil-lubricated
Fig. 1. Multi-stage magnet drive centrifugal pump SLM GV oil-lubricated
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
Magnet drive submerged pump SLM NVT
18 19
Fig. 1. Magnet drive submerged pump SLM NVT
Applications
Sectors
E Tank installationsE Chemical and petrochemical industriesE Power engineeringE Refineries
Pumping of
E AcidsE LyesE HydrocarbonsE Heat transfer liquidsE Aggressive, explosive and
toxic liquidsE Industrial effluent
Technical data
Standard design
Flow rate: up to 500 m³/hDelivery head: up to 150 m L.C.Temperature range: -30 °C to +120 °CPressure rating: PN 16 at 120 °CImmersion depth: 6,000 mm
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 900 m³/hDelivery head: up to 200 m L.C.Temperature range: -50 °C to +200 °CPressure rating: up to PN 40Immersion depth: 10,000 mm
Materials: Nickel-based materials, titanium
Construction
E Single-stage submerged pumpE Hydraulic performance according to
DIN EN 22858 and ISO 2858E Technical design based on
DIN EN ISO 15783E Permanent magnet drive – maintenance-free – no shaft duct – separation of liquid chamber /
atmosphere by means of isolation shell – slipless power transferE Drive shaft with permanently grease-
lubricated anti-friction bearingsE Product-lubricated journal bearings;
made from silicon carbide (SSiC); further bearing materials upon request
Fig. 2. 3-D cross-section of magnet drive submerged pump SLM NVT
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
20 21
Magnet drive screw pump SLM LV
Applications
Sectors
E Chemical and petrochemical industriesE Plastics and rubber industryE Mineral oil industryE Paint and varnish industryE Tank installations
Pumping of
E Viscous liquids up to 10,000 mPasE Lubricating oilsE Lubricating greasesE BitumenE ResinsE Glues
Technical data
Standard design
Flow rate: up to 50 m³/hDifferential pressure: 16 barTemperature range: -30 °C to +150 °CPressure rating: PN 16 at 120 °C
Materials: Steel, stainless steel Customized solutions
Flow rate: up to 200 m³/hDifferential pressure: 16 barTemperature range: -120 °C to +300 °CPressure rating: up to PN 100
Construction
E Horizontal screw pumpE Pumping of liquids with high viscosityE Permanent magnet drive – maintenance-free – no shaft duct – separation of liquid chamber /
atmosphere by means of isolation shell – slipless power transferE Bearing bracket with oil or grease-
lubricated anti-friction bearings; optional: close-coupled design
Fig. 1. Magnet drive screw pump SLM LV
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
22 23
Centrifugal pump NOV with shaft sealing
Fig. 1. Centrifugal pump NOV with shaft sealing, oil-lubricated
Applications
Sectors
E Chemical and petrochemical industriesE Refrigeration and heat engineeringE Liquid gas plantsE Paper and cellulose plantsE Power engineeringE Tank installationsE RefineriesE Sugar industryE Coking plants
Pumping of
E AcidsE LyesE HydrocarbonsE Heat transfer liquidsE CoolantsE Liquid gasesE SewageE Colouring mattersE Salt solutionsE Pulp
Technical data
Standard design
Flow rate: up to 2,600 m³/hDelivery head: up to 200 m L.C.Temperature range: -30 °C to +250 °CPressure rating: PN 16 at 120° C
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 3,500 m³/hDelivery head: up to 220 m L.C.Temperature range: -120 °C to +450 °CPressure rating: up to PN 100
Materials: Nickel-based materials, titanium
Construction
E Single-stage, horizontalcentrifugal pump
E Hydraulic performance and dimensions according to DIN EN 22858 and ISO 2858
E Technical design according to DIN EN ISO 5199
E Shaft sealing space for installation of mechanical seals according to DIN EN 12756 or stuffing box packings
E Bearing bracket with oil-lubricated anti-friction bearings
Fig. 2. 3-D cross-section of centrifugal pump NOV with shaft sealing,
oil-lubricated
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
24 25
Multi-stage centrifugal pump GOV with shaft sealing
Applications
Sectors
E Chemical and petrochemical industriesE Refrigeration and heat engineeringE Liquid gas plantsE Tank installationsE Power engineeringE Refineries
Pumping of
E Liquid gasesE AcidsE LyesE HydrocarbonsE Hot waterE Heat transfer liquids
Technical data
Standard design
Flow rate: up to 300 m³/hDelivery head: up to 600 m L.C.Temperature range: -30 °C to +250 °CPressure rating: PN 63 at 120 °C
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 350 m³/hDelivery head: up to 700 m L.C.Temperature range: -120 °C to +350 °CPressure rating: up to PN 100
Construction
E Multi-stage, horizontal centrifugal pump in process construction
E Technical design based on DIN EN ISO 5199
E Impeller arrangement in series, maximum number of stages: 6
E First low- NPSH stage for improved suction performanceE Shaft sealing space for installation of
mechanical seals according to DIN EN 12756 or stuffing box packings
E Bearing bracket with oil-lubricated anti-friction bearings
E Designs: barrel-housing design or sectional design
Fig. 2. 3-D cross-section of multi-stage centrifugal pump GOV
-with shaft sealing
Fig. 1. Multi-stage centrifugal pump GOV with shaft sealing
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
26 27
Fig. 2. 3-D cross-section submerged pump TP NO with shaft sealing
Applications
Sectors
E Chemical and petrochemical industriesE Refrigeration and heat engineeringE Tank installationsE Power engineeringE RefineriesE Coking plants
Pumping of
E AcidsE LyesE HydrocarbonsE Heat transfer liquidsE Liquid gases
Submerged pump TP NO with shaft sealing
Technical data
Standard design
Flow rate: up to 900 m³/hDelivery head: up to 150 m L.C.Temperature range: -30 °C to +200 °CPressure rating: PN 16 at 120 °CImmersion depth: 6,000 mm
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 1600 m³/hDelivery head: up to 200 m L.C.Temperature range: -50 °C to +250 °CPressure rating: up to PN 40Immersion depth: 10,000 mm
Materials: Nickel-based materials, titanium
Construction
E Single-stage submerged pumpE Hydraulic performance according to
DIN EN 22858 and ISO 2858E Technical design based on
DIN EN ISO 5199E Shaft sealing space for installation of
mechanical seals according to DIN EN 12756 or stuffing box packings
E Product-lubricated journal bearings; made from silicon carbide (SSiC); further bearing materials upon request
Fig. 1. Submerged pump TP NO with shaft sealing
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
28 29
Applications
Sectors
E Power engineeringE Chemical and petrochemical industriesE Paper and cellulose industryE RefineriesE Cooling water plantsE Sea water treatments
Pumping of
E AcidsE LyesE Paper and cellulose mashE Brine (evaporation plants)E Mineral fertilisers (liquid)E Sea waterE Cooling waterE Dyes
Technical data
Standard design
Flow rate: up to 5,000 m³/hDelivery head: up to 8 m L.C.Temperature range: -30 °C to +160° CPressure rating: PN 10
Materials: Steel, stainless steel
Customized solutions
Flow rate: up to 12,000 m³/hDelivery head: up to 12 m L.C.Temperature range: -120 °C to +250 °CPressure rating: up to PN 100
Construction
E Horizontal axial flow pumpE Pump casing in cast or welding
constructionE Shaft sealing space for installation of
mechanical seals according to DIN EN 12756 or stuffing box packings
E Bearing bracket with oil or grease-lubricated anti-friction bearings
E Pumping direction freely selectableE Modification of service data possible by
means of adjusting propeller blades
Fig. 1. Propeller pump P
Propeller pump Pwith shaft sealing
Higher flow rates, temperatures, pressure ratings and further special materials upon request.Further information on materials of construction on p. 31.
30 31
Selected Materials
Stainless steel
Castings Rolled material
1.4408 GX5CrNiMo 19-11-2 1.4571 X6CrNiMoTi 17-12-2
1.4308 GX5CrNi 19-10 1.4404 X2CrNiMo 17-12-2
1.4470 GX2CrNiMoN 22-5-3 1.4541 X6CrNiTi 18-10
1.4462 X2CrNiMoN 22-5-3
Steel
Castings Rolled material
1.0619 GP240GH 1.7225 42CrMo4
1.6220 G20Mn5 1.0038 S235JR
0.7043 EN-GJS-400-18 1.0460 P250GH
1.0421 P355T1
Nickel-based materials
Castings Rolled material
2.4685 G-NiMo28 2.4610 NiMo16Cr16Ti
2.4686 G-NiMo17Cr 2.4617 NiMo28
2.4170 G-Ni95 2.4068 Ni99
2.4365 G-NiCu30Nb 2.4360 NiCu30Fe
2.4660 NiCr20CuMo
Titanium
Castings Rolled material
3.7031 G-Ti2 3.7035 Ti2
3.7032 G-Ti2Pd 3.7165 Ti6Al4V
Customized solutions
E Double-flow radial flow centrifugal pump with magnet drive SLM ZVO
E Magnet drives for your applicationE Agitator drives SLM RAVE Self-priming pumps with magnet
drive SLM DVE Multi-stage centrifugal pump for delivery
heads of up to 1,000m SLM HV / HE Multi-stage submerged pump with
magnet drive SLM GV TTE Multi-stage submerged pump with
stuffing box packing TP GOTE Mobile pump unitsE Vertical pumps with magnet driveE Pipe elbow propeller pumps PKE Plastic-lined pumps
The pillars supporting your production chain
With our extensive portfolio for a wide range of applications, we support you from consultation to installation, all the way to maintenance and after-sales service.We listen to your requests and requirements, so that we can find solutions together and will always be able to offer you the best. This is because only the constant exchange with you and our international partners allows us to know – even in different countries – what challenges you have to meet on a daily basis.Whether you work in terotechnology or in industrial companies, with pumps or valves, in Germany or worldwide – we know what interests you, and develop technologies that are individually adapted to your requirements. Technologies you can trust.
Further materials upon request
Global presence
32 33
Branch office Sales office
Further information on our representatives can be found athttp://www.klaus-union.de/Sales-departments-worldwide.273.0.html
Australasia Austria Belarus Belgium Brazil Canada China Czech Republic Denmark Egypt England Finland France Germany Hungary India Iran Italy Kazakhstan Kuwait Malaysia
Spain Sweden Switzerland Taiwan Thailand Turkey Ukraine UAE USA Vietnam
Mexico Netherlands Norway Oman Poland Qatar Romania Russia Singapore Slovakia South Korea
Branch office with Centre of Competence
34 35
KLAUS UNION SERVICE GmbH
We speak your language – worldwide
In order to support you in more than just techno logy, in 2006 we founded the service subsidiary KLAUS UNION SERVICE GmbH.Because, for us, premium quality is primarily found by being close to our customers. Therefore, we support you from consultation to installation, all the way to maintenance and after-sales serv-ice. As an international company with sales offices, businesses, representatives and partners worldwide, we are familiar with the individual requirements of our customers. We support you locally with our global serv-ice and sales network, no matter where your pump is installed or where your company is located.
Our support and our first-class products are available to you worldwide, as is our extensive spare parts storage, which is also accessible to you around the clock through our webshop. In addition, we support you during commis-sioning, maintenance and repair of KLAUS UNION products. We support you locally with training courses, seminars, consulting serv-ices, failure analysis and spare parts manage-ment. We know how imprortant it is for you to have a reliable partner. At every step of the process, we will support you with experience and competence, responsibility and passion.
Our performance profile
E Onsite repairs
E Workshop repairs
E Test run up to DN 1200 according to
various standards
E Spare parts storage
E Spare part production
E Spare part delivery worldwide
E Spare part management as desired by customers
E Onsite maintenance
E Installation
E Customer advisory service
E Commissioning
E 24-hour service by agreement
E Trouble-shooting
E Training and tutorials
E Assembly
E Long-term service contracts
E Onsite measurements
E Maintenance planning and consulting
E Diagnostics