product product catalog catalog - gnc industries · pdf file about gn industries, inc.: since...

www.gnci.org

Product Product

Catalog Catalog

Main Phone # 870-248-9901 Fax # 870-248-9905

Website: www.gnci.org Email Sequence: [email protected]

Sales:

Inside Sales…….………………... Ext 1 Email……………………[email protected]

Custom Pricing:

Price Coordinator………….. Ext 151

Invoicing/Accounts Receivable:

Accounts Receivable………… Ext 116

Service/Warranty:

Email………………[email protected]

www.gnci.org

Key Contacts

www.gnci.org

About GNC Industries, Inc.:

Since 1983, GNC Industries, Inc. has been developing and manufacturing industrial spray equipment for the Lawn Care, Golf, Pest Control, Parks & Recreation, and Tree Care Indus-tries.

GNC Industries, Inc. is far from an impersonal assembly-line. Our hands-on approach assures only quality products leave our facility. At each step of the way , there are craftsmen, proud of their work and determined to apply their skills towards a flawless, high quality piece of equip-ment.

Manufacturing Facility:

GNC’s manufacturing facility is located on 5 acres with over 40,000 square feet of enclosed manufacturing area. Our manufacturing process includes robotic welding, water jet precision cuts, plus full assembly and testing completed 100% in house. This allows GNC to keep the highest quality control possible while minimizing lead times.

To support our vast manufacturing capabilities, GNC keeps a large amount of inventory on

hand which allows us to build a custom unit within just a few days, or do a production run of

100+ within 10 business days.

Shipping Lead Times:

In 2015, GNC’s average lead time from order entry to shipping was the fastest in the industry.

Plus, GNC is centrally located in Arkansas, which enables us to ship anywhere within the Unit-

ed States in a timely and cost effective manner.

Technical Support and Customer Service:

In addition to 75 years of combined industry knowledge, GNC has a degreed engineer on staff

to assist with technical questions. GNC‘s expertly trained customer service staff is here to help

with equipment selections, custom designs, maintenance questions and more.

GNC Industries, Inc.

www.gnci.org

What do I need to know?

What size truck do you have? 100 gallon and under are approved for most trucks and some UTV’s 200 gallon minimum requirement 1/2 Ton 300 gallon minimum requirement 3/4 Ton 400 + gallon minimum requirement 1 Ton

Pump Selection: 8-10 GPM Pumps, most common for Pest Control, Lawn Care and small Tree

Spraying Piston P530 with 6.0 HP Manual Start Subaru Diaphragm Kappa 43 with 6.0 HP Manual Start Subaru

15-20 GPM Pumps, most common for large Tree Spraying, Lawn Care & Pest Control that requires heavy agitation or dual operators

Piston P550 with 9 HP Electric Start Subaru Diaphragm Kappa 55 with 9 HP Electric Start Subaru

Electric or Manual Reel? Keep in mind electric reels must have a battery source hooked up to them and

*MUST* be grounded DIRECTLY to the same frame as the battery source

What size Hose? 3/8” & 1/2” are most common 5/8” & 3/4” are custom orders and used mainly in large tree application See hose package section for details

How are you going to apply it? Gun/Boom? 11-855-00 Do-All Gun Kit – Most applications 11-857-00 Mag-2000– Low pressure lawn spraying ONLY 11-854-01 Mighty Lite—Medium tree & shrub spraying 11-854-00 Might Mag– Large tree spraying 11-856-00 Mag-1 Root Feeder– Soil injection root feeding trees 23-BM-8500 Boomless Boom 12-15 ft. swath- Open area herbicide application 23-BM-8501 Multi Nozzle De-Icing Boom– Targeted road way application 23-BM-8504E 16ft Boom with Electronic Controls– Targeted herbicide application 23-BM-8504M 16ft Boom with Manual Controls– Targeted herbicide application

www.gnci.org

How to Order a Complete Sprayer

Step 1: Base Sprayer Base includes:

Tank Pump Subaru Engine w/5 Yr. Mfg. Warranty Suction Filter Ventura Jet Agitation Stainless Steel Frame (under 600 gal)

Note: With an additional charge and lead time, other engine options are available

Step 2: Hose Reel Package Package includes:

Reel w/Stainless Steel Swivel Hose w/Brass Swivel Fittings

Note: Electric reels include wire harness, button, solenoid, circuit breaker and testing

Step 3: Accessories (optional)

Spray Gun Root Feeder Roller Guides Quick Disconnects Booms

www.gnci.org

Shurflo, 3 GPM 12 Volt Pump, Manual Hannay Hose Reel w/Super Swivel, 3/8” X 200’ High Pressure, Chemical Resistant Hose

Manual Reel P/N #: 25-GNC-02CPB2-SH

Weight: Manual Reel: 65# Shipping Weight: 235#

Dimensions: 40.5” Wide x 21.5” Deep 17” Top of Pump, 12.5” Top of Tank, X 34” Top of Reel

P530 with Subaru 6.0 HP Manual Start Engine, Hannay Hose Reel w/ Super Swivel, 3/8” X 200’ Hose

Electric Reel P/N #: 25-GNC-95CP82-P530 Manual Reel P/N #: 25-GNC-95CP92-P530

Weight: Electric Reel: 195# Shipping Weight: 350# Manual Reel: 175# Shipping Weight: 330#

Dimensions: 45” Wide x 24” Deep 38.5” Top of Pump, 22” Top of Risers, 41.5” Top of Reel

P530 with Subaru 6.0 HP Manual Start Engine, Hannay Hose Reel w/Super Swivel, 1/2” X 300’ Hose

Electric Reel P/N #: 25-GNC-91PC60-P530 Manual Reel P/N #: 25-GNC-91PC70-P530

Weight: Electric Reel: 295# Shipping Weight: 485# Manual Reel: 275# Shipping Weight: 465#

Dimensions: 40.5” Wide x 56” Deep 20” Top of Risers, 30” Top of Tank, 39.5” Top of Reel

Top Selling Package Units

025 Gallon

050 Gallon

100 Gallon

Honda engine swap additional line item: 24-EN-HM55UG

www.gnci.org

Top Selling Space Saver Base Units

P/N #: 21-GNC-91SSXX-P530

P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 195# Dimensions: 37.5” Top of Pump (16” Top of Tank) x 60” Wide Foot Print: 48” Wide X 39” Deep


P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 235# Dimensions: 46” Top of Pump (29” Top of Tank) x 72” Wide Foot Print: 48” Wide X 41” Deep with Frame (42.5” at Tabs)


P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 245# Dimensions: 52” Top of Pump (35” Top of Tank) x 72” Wide Foot Print: 48” Wide X 41” Deep with Frame (42.5” at Tabs)


P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 320# Dimensions: 52” Top of Pump (35” Top of Tank) x 72” Wide Foot Print: 48” Wide X 58.5” Deep with Frame (60” at Tabs)

GNC Space Saver sprayers are the most space efficient sprayer on the market. Featuring rotational molded, UV protected poly tanks, durable enough to handle liquid de-icing material.

Standard units are equipped with GNC’s P-Series Piston Pump, Subaru Engines (backed by a 5 year Subaru supported warranty), stainless steel framing on 200, 300 & 400 gallon units. The 075 & 100 gallon units have stainless steel support brackets. Jet agitation, airgap/back flow preventions, hinged lockable lids with lock and reel mounting supports come standard on all GNC Space Saver sprayers.

100 Gallon

200 Gallon

300 Gallon

400 Gallon

Approved for Most Trucks Approved for Some UTV’s

Truck: 1/2 Ton Min Mechanical Agitation Available

Truck: 3/4 Ton Min Mechanical Agitation Available

Truck: 1 Ton Min Mechanical Agitation Available


www.gnci.org

Top Selling In-Line Base Units

P/N #: 21-GNC-92PCXX-P530

P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 240# Dimensions: 40.5” Wide x 70” Deep 26” Top of Risers, 39” Top of Tank, 46.5” Top of Reel

P/N #: 21-GNC-93LGXX-P530

P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 315# Dimensions: 40.5” Wide x 88” Deep 21” Top of Risers, 48” Top of Tank, 41” Top of Reel

P/N #: 21-GNC-95LGXX-P530

P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 380# Dimensions: 49.5” Wide x 96“ Deep 21” Top of Risers, 55” Top of Tank, 41” Top of Reel

GNC Skid mounted commercial base sprayers are built for industrial use. These units are built to be used in Lawn Care, Pest Control, Tree Service and many other markets.

Standard units are equipped with GNC’s P-Series Piston Pump, Subaru Engine (backed by a 5 year Subaru supported warranty), stainless steel frame, ventura jet agitation, airgap/back flow preventions, hinged lockable lids with lock and standard hose reel pre-drilled mounting areas.

Minimum truck: 1/2 Ton 18” Hose Reel Package Required

200 Gallon

300 Gallon

500 Gallon

Minimum truck: 3/4 Ton 18” Hose Reel Package Required

Minimum truck: 1 Ton 18” Hose Reel Package Required


www.gnci.org

Top Selling Cross Mount Base Units

050 Gallon P/N #: 21-GNC-95LPXX-P530 P530 with Subaru 6.0 HP Manual Start Engine

Equipment Base Weight: 155# Dimensions: 40.5” Wide x 48” Deep 24” Top of Pump, 22” Top of Tank, 23” Top of Reel

P/N #: 21-GNC-91LPXX-P530 P530 with Subaru 6.0 HP Manual Start Engine

Equipment Base Weight: 160# Dimensions: 40.5” Wide x 56” Deep 24” Top of Pump, 30” Top of Tank, 23” Top of Reel

P/N #: 21-GNC-91PCXX-P530 P530 with Subaru 6.0 HP Manual Start Engine

Equipment Base Weight: 170# Dimensions: 40.5” Wide x 56” Deep 20” Top of Risers, 30” Top of Tank, 39.5” Top of Reel

GNC Skid mounted commercial base sprayers are built for industrial use. These units are built to be used in Lawn Care, Pest Control, Tree Service and many other markets. Standard units are equipped with GNC’s P-Series Piston Pump or Udor Kappa 43GR Dia-phragm Pump, Subaru Engine (backed by a 5 year Subaru supported warranty), stainless steel frame, ventura jet agitation, airgap/back flow preventions, hinged lockable lids with lock and standard hose reel pre-drilled mounting areas.

Approved for Most Trucks 12” Hose Reel Package Required

100 Gallon

100 Gallon




www.gnci.org

Top Selling Hose Reel Packages

Part No. Description

84-HA-1526-E32 Hannay 18" Electric Reel, 300ft of 1/2" Hose, with Button, Solenoid, Circuit Breaker & Wire Harness (Roller Guides sold separately HA-9939-1018)

84-HA-1526-E43 Hannay 18" Electric Reel, 400ft of 3/8" Hose, with Button, Solenoid, Circuit Breaker & Wire Harness (Roller Guides sold separately HA-9939-1018)

84-HA-1526-M32 Hannay 18" Manual, 300ft of 1/2" Hose (Roller Guides sold separately HA-9939-1018)

84-HA-1526-M43 Hannay 18" Manual Reel, 400ft of 3/8" Hose (Roller Guides sold separately HA-9939-1018)

Standard 18” Reels *NOT Available on Compact or Low Profile Mounted Base Units

Part No. Description

84-HA-1520-E23

Hannay 12" Electric Reel, 200ft of 3/8" Hose, with

Button, Solenoid, Circuit Breaker & Wire Harness

(Roller Guides sold separately HA-9939-1012)

84-HA-1520-E33

Hannay 12" Electric Reel, 300ft of 3/8" Hose, W/ But-

ton, Solenoid, Circuit Breaker & Wire Harness


84-HA-1520-M23 Hannay 12" Manual Reel, 200ft of 3/8" Hose


84-HA-1520-M33 Hannay 12" Manual Reel, 300ft of 3/8" Hose


Standard 12” Reels *NOT Available on Skid Base Units with Hose Reel Risers

Part No Description—Hose Reel Replacement Parts

22-HR-S12 1/2” Stainless Steel Replacement Swivel Will fit Cox 1125 & Hannay 1500 Series

HA-9915-0042 Hannay 12VDC 1/3HP Replacement Motor

HA-9917-0025 12 Volt Replacement Solenoid

www.gnci.org

Hose

Max PSI 200

(Unless other wise Stated)

Part Number Description Weight

71-PA410-0037C 3/8” Clear Braided Hose Max PSI 200

By the Foot .11 #


By the Foot .17 #


By the Foot .21 #

Max Working

PSI 600

(Unless other wise Stated)

71-TW600-0037 3/8” Spray Hose 600 PSI

By the Foot .12 #

71-TW700-0037-

200* 8.5 mm x 200’ Spray Hose 700 PSI 24 #

71-TW600-0037-

200* 3/8” X 200’ Spray Hose 600 PSI 24 #

71-TW600-0037-

300* 3/8” X 300’ Spray Hose 600 PSI 37 #

71-TW600-0037-

400* 3/8” X 400’ Spray Hose 600 PSI 49 #

Max Working

PSI 600

(Unless other wise Stated

71-TW600-0050 1/2” Spray Hose 600 PSI

By the Foot .15 #

71-TW600-0050-

150* 1/2” X 150’ Spray Hose 600 PSI 23 #

71-TW600-0050-

300* 1/2” X 300’ Spray Hose 600 PSI 45 #

71-TW600-0050-

400* 1/2” X 400’ Spray Hose 600 PSI 60 #

Max PSI Varies

(See Description)

71-PA115-0075 ¾” Suction Hose Max PSI 300 .21 #

71-PA115-0100 1” Suction Hose Max PSI 270 .28 #

71-PA115-0114 1-1/4” Suction Hose Max PSI 270 .35 #

71-PA115-0112 1-1/2” Suction Hose Max PSI 270 .48 #

71-PA115-0200 2” Suction Hose Max PSI 210 .67 #

*With Fittings please change beginning part number from 7”1” to 7”4”, All weights are estimates.

www.gnci.org

Top Selling Pump Specs

P530 Piston Pump

Max Flow: 10 GPM Max Pressure: 600 PSI Max Rated Speed: 700 RPM

P550 Piston Pump Max Flow: 15 GPM Max Pressure: 600 PSI Max Rated Speed: 700 RPM

Kappa 43/GR Diaphragm Pump


Kappa 55/GR8 Diaphragm Pump


Shaft Size: 3/4” Ports: 1” inlet, 1/2” outlet Weight: 30 lbs.

Shaft Size: 1-3/16” Ports: 1-1/4” inlet, 3/4” outlet Weight: 55 lbs.

5-6 HP Gas engine recommended. Pump has built in pressure regu-

lator with dump valve and pulsation dampener. Pumps are set up

to run on a belt and pulley system.

9-11 HP Gas engine recommended. Pump has built in pressure regu-

lator with dump valve and pulsation dampener. Pumps are set up to

run on a belt and pulley system.

Bypass: 3/4” outlet Ports: 1-1/4” inlet, 1/2” outlet Weight: 49 lbs.

Bypass: 3/4” outlet Ports: 1” inlet, 1/2” outlet Weight: 39 lbs.

9-11 HP Gas Engine with 1” shaft. Pump has built in pressure regula-

tor with dump valve. Pumps are set up to run on a direct drive system.

5-6 HP Gas engine with 3/4” shaft. Pump has built in pressure regula-

tor with dump valve. Pumps are set up to run on a direct drive system.

The above pumps are not recommended for bleach/chlorine based products.

www.gnci.org

Electric Pump Specs

RE-5538-2E1-94A

Max Flow: 7.0 GPM Max Pressure: 60 PSI 12Volt

SH-2087-593-135 Max Flow: 3 GPM Max Pressure: 45PSI 12 Volt Demand Switch

SH-2088-394-144 Max Flow: 3 GPM Max Pressure: 50PSI 110/115 Volt A/C

SH-8000-543-238 Max Flow: 1.8 GPM Max Pressure: 100 PSI 12 Volt Demand Switch

Ports: 1/2” MNPT Weight: 6 lbs.


Pump Valve

Assembly

Upper

Housing

Drive

Assembly

Pressure

Switch

Complete Head

Assembly

RE-5538-2E1-94A

Fat Boy 12 Volt N/A N/A N/A N/A

SH-2087-593-135

SHURflo 12 Volt 94-232-05 94-231-30 94-238-03 94-230-36 94-236-11

SH-2088-394-144

SHURflo 12 Volt 94-232-05 94-231-30 94-238-03 94-230-36 94-236-11

SH-8000-543-238

SHURflo 12 Volt 94-390-05 94-379-00 94-385-32 94-375-18 N/A

Ports: 1/2” FNPT Weight: 6 lbs.

Ports: 3/8” FNPT Weight: 5 lbs.

Ports: 1/2” MNPT Weight: 6 lbs.

www.gnci.org

Udor Pump Specs


Model Max.

GPM

Max

PSI

Inlet/

Outlet/

Bypass

Description Est.

Wt.

UD-Kappa-25/GR 7.0 350

1”

1/2” (2)

3/4”

Two diaphragm pump with pulsation

dampener & control unit with adjustable

pressure regulator, manual dump lever,

dual ball valve outlets & pressure gauge.

Equipped with a gearbox for 3-5.5 HP

gasoline engines with 3/4" shafts.

28

UD-Kappa-43/GR 10.5 560

1”

1/2” (2)

3/4”

Three diaphragm pump with control unit with adjustable pressure regulator, man-ual dump lever, dual ball valve outlets & pressure gauge. Fitted with gearbox for 4-6.5 HP gasoline engines with 3/4" shafts.

39

UD-Kappa-55/GR8 15 560

1-1/4”

1/2” (2)

3/4”

Three diaphragm pump with universal

drive face, pulsation dampener & control

unit with adjustable pressure regulator,

manual dump lever, dual ball valve out-

lets & pressure gauge.KAPPA-55 pump

with gear reduction for 8-11 HP gasoline

engines with 1" shafts.

49

UD-Kappa-55/GR5 15 350

1-1/4”

1/2” (2)

3/4”





lets & pressure gauge KAPPA-55 pump

with gear reduction for 5-6.5 HP gasoline

engines with 3/4" shafts.

47

UD-Kappa-75/GR 20 560

1-1/4”

1/2” (2)

3/4”





lets & pressure gauge KAPPA-75 pump

with gear reduction for 9-13 HP gasoline

engines with 1" shafts.

58

UD-RO-70/GR-5 20 300

1-1/4”

3/4”

N/A

RO-70 with gear reduction for use with 5-

6.5 HP gasoline engines with 3/4" shafts.

Recommended control unit: 6047.06/LP.

45

www.gnci.org

Hypro Pump Specs


Model Max.

GPM

Max

PSI

Max.

RPM Description

Est.

Wt.

HY-9910-D252

HY-9910-D252GRI 6 290 650

2-diaphragm, ¾” inlet, ½” outlet. Shaft

D252 ¾” solid, D252GR is ¾” or 5/8”

hollow, gear reduced for 2-3.5 hp gas

engine

14

HY-9910-D30

HY-9910-D30AP-P 9.5 580 550

2-diaphragm pump-1” HB inlet, ½” HB

outlet, D30AP-A -3/4” solid extended

shaft. Select shaft kit or gear reduction.

Recommended control unit 9910-

GS40GI, direct gas engine mount, use

gear reduction Kit 1636

23

24

HY-9910-D30GRGI

HY-9910-

D30BGRGI

9.5 580 550

2-diaphragms, with GS40GI control unit &

gear reduction – fits 5 hp gas engine – B

version with Buna-N diaphragms

33

32

HY-9910-D50

HY-9910-D50AP-A 14 580 550

2-diaphrgams, 1-1/4” inlet, ½” outlet, D-

50AP-A 1” solid ext shaft. Recommended

control unit 9910-GS40GI, direct gas en-

gine mount use gear reduction Kit 1642

34

37

HY-9910-D503 14 580 550

3-diaphragm pump -1/” HB inlet, ¾” NPT

outlet. Recommended control unit 9910-

RM40, direct gas engine mount us gear

reduction Kit 1642

28

HY-9910-

D503GRGI 15 580 3600

3-diaphragms, 1-1/4” (M) inlet, ¾” NPT

outlet, shaft flanged adaptor, D503GRGI

has 1” hollow shaft for gas engine mount.

41

www.gnci.org

Pump Kits

Pump Valve Kit Piston or

Diaphragm Kit O-Ring Kit Complete Kit

P530

GNC Piston 43-530-350 43-530-325 N/A 43-530-380

P550

GNC Piston 43-550-550 43-550-525 N/A 43-550-580

P10/TS28

GNC Piston 43-810-350 43-810-325 N/A 43-810-380

P15 (Blue)

GNC Piston 43-815-550 43-815-525 N/A

43-815-580

P15W (Black)

GNC Piston 43-550-550 43-815W-525 N/A 43-815W-580

Iota –17/18/20

Udor Diaphragm N/A 02-8700.01 N/A 02-8700.01/CK

Kappa 25


Kappa 33/43/53


Kappa 55


RO-70


D252

Hypro Diaphragm 9910-KIT2408 9910-KIT1723 9910-KIT2409 N/A

D30


D50


D403


www.gnci.org

Pump Kits

Pump Regulator

Complete

Regulator

Repair Kit

3/4” Gear Box

5.5-6.5 HP

1” Gear Box

9.0-11HP

P530

GNC Piston 43-530-200 N/A N/A N/A

P550

GNC Piston 43-530-200 N/A N/A N/A

P10/TS28

GNC Piston 43-810-200 43-810-250 N/A N/A

P15 (Blue)

GNC Piston 43-815-200 43-815-250 N/A N/A

P15W (Black)

GNC Piston 43-815W-200 43-815W-250 N/A N/A

Iota –17/18/20

Udor Diaphragm 02-6010.23 02-8701.01 02-5094.76 N/A

Kappa 25

Udor Diaphragm 02-6010.95 02-6062.A9 02-5085.F7 N/A

Kappa 33/43/53

Udor Diaphragm 02-6010.93 02-6062.A9 02-5071.75 N/A

Kappa 55

Udor Diaphragm

GR5= 02-6010.24/LP

GR8= 02-6010.24 02-8701.10 02-5027.75 02-5033.A4

RO-70

Udor Diaphragm

GR5= 02-6047.06/LP

GR8= 02-6047.06 02-8701.02 02-5027.75 02-5033.A4

D252

Hypro Diaphragm 9910-KIT1990 N/A

D30

Hypro Diaphragm 9910-GS40GI 9910-KIT1757 9910-KIT1640 N/A

D50

Hypro Diaphragm 9910-GS40GI 9910-KIT1757 9910-KIT1642 N/A

D403

Hypro Diaphragm 9910-GR40 9910-KIT2488 9910-KIT1640 N/A

www.gnci.org

Ref # Item ID Description

1A 42-530-01 Crankcase

2 42-530-02 Oil Seal for Piston

5 42-530-05 Screw For Crankshaft Oil Seal Cover

6 42-530-06 Oil Seal Cover

7A 42-530-07 Oil Inlet Cover

8 42-530-08 Gasket for Rear Crankcase Cover

9 42-530-09 Crankcase Rear Cover

10 42-530-10 Screw for Crankshaft Rear Cover

11A 42-530-11 Oil Window Assembly

12A 42-530-12 Oil Drainage Plug

13 42-530-13 Crankshaft Key

14 42-530-14 Crankshaft

15A 42-530-15 Connecting Rod Assembly

16 42-530-16 Crankshaft Bearing,

17 42-530-17 Crankshaft Oil Seal

18 42-530-18 Crankshaft Cover

19 42-530-19 Piston Assembly

26 42-530-26 Piston Pin

28 42-530-28S Piston Pump Stand (Short)

28 42-530-28T Piston Pump Stand (Tall)

29A 42-530-29 Bolt Set with Washer


31 42-530-31 Pulley with Bolt Set,

40 43-530-335 Cylinder Assembly

41 42-530-41 Bolt Set with Washer

42 42-530-42 Double End Screw W/ Nut Spring

Washer

51A 42-530-51 Suction Chamber Assembly

53 42-530-53 Bolt Set with Washer

60 42-530-60 Connecting Hose with O-Ring

65 42-530-65 Outlet Chamber

70 42-530-70 Plug for Outlet Chamber

74 42-530-74 Air Chamber O-Ring

75 42-530-75 Air Chamber Surge Tank

Feature Kits

43-530-200 P530/550 Pressure Regulator Assembly

43-530-325 P530 Packing Repair Kit

43-530-335 P530 Cylinder Assembly (#40 W/Pkg’ings)

43-530-350 P530 Valve Repair Kit

43-530-380 P530 Rebuild Kit (Pkg & Valve Kit)

Important:

When ordering parts, give PART

NUMBER and PART DESCRIPTION.

Reference Numbers are used only to

point out parts in the drawing and are

NOT to be used as ordering numbers

P530 (P10W)

www.gnci.org

Feature Kits

43-530-200 P530/550 Pressure Reg Assy

43-550-525 P550 Packing Repair Kit

43-550-535 P550 Cylinder Assembly

43-550-550 P550 & P15W Valve Repair Kit

43-550-580 P550 Rebuild Kit


1A 42-550-01 Crankcase

2 42-550-02 Oil Seal for Piston

3 42-550-03 Dust Cover

5 42-530-05 Screw For Crankshaft Oil Seal Cover

6 42-550-06 Cover, Oil Seal

7A 42-550-07 Oil Inlet Cover

8 42-550-08 Gasket for Rear Crankcase Cover

9 42-550-09 Rear Cover

10 42-530-10 Screw for Crankshaft Rear Cover

11A 42-530-11 Oil Window Assembly

12A 42-530-12 Oil Drainage Plug Assembly

13 42-530-13 Crankshaft Key

14 42-550-14 Crankshaft,

15A 42-550-15 Connecting Rod Assembly

16 42-550-16 Crankshaft Bearing

17 42-550-17 Crankshaft Oil Seal,

18 42-530-18 Crankshaft Cover

19 42-550-19 Piston Assembly

26 42-550-26 Piston Pin

28 42-550-28 Pump Stand

29A 42-530-29 Bolt Set with Washer,


31 42-550-31 Pulley with Bolt Set

40 43-550-335 Cylinder Assembly

41 42-550-41 Cylinder Screw With Washer

42 42-550-42 Double-Ended Screw,

51A 42-550-51 Suction Chamber Assembly

53A 42-550-53 Bolt Set with Washer

54 43-550-550 Valve Assembly, Sold In Kit 43-550-550

60A 42-530-60 Connecting Hose with O-Ring,

65 42-550-65 Outlet Chamber

70 42-550-70 Plug for Outlet Chamber,

74 42-550-74 Air Chamber O-Ring

75 42-550-75 Air Chamber Surge Tank

Important:






P550


146 UD-02-0006.14 Bearing

157 UD-02-0007.05 Seal (KAPPA-33/43)

189 UD-02-0001.11 Retaining Ring (KAPPA-33/43)

240 UD-02-0102.04 Diaphragm Bolt

357 UD-02-0202.18 Suction/Inlet Hose Barb

(30/33/40/43)

513 UD-02-0206.41 Piston Sleeve (KAPPA-43)

540 UD-02-0208.98 Oil Reserve Cap

592 UD-02-0209.73 Crankcase

701 UD-02-0214.05 Bearing

808 UD-02-0301.43 Diaphragm Washer

816 UD-02-0301.54 Spacer (KAPPA-33/43)

817 UD-02-0302.66 Spacer (KAPPA-33/43)

964 UD-02-0501.E2 Body Flange

1038 UD-02-0604.18 Suction/Barb Nut

1075 UD-02-0605.43 Gasket

1192 UD-02-0801.02 Shaft Key

1305 UD-02-0903.43 Piston Diaphragm Buna-N

1381 UD-02-1101.27 O-Ring

1382 UD-02-1101.29 O-Ring

1389 UD-02-1101.41 O-Ring

1421 UD-02-1101.88 O-Ring

1434 UD-02-1101.D1 O-Ring


1490 UD-02-1203.27 Oil Reservoir

1570 UD-02-1205.07 Piston

1702 UD-02-6006.01 Valve Assembly

K25/30/33/40/43/53/75/100

1722 UD-02-6017.13 Head- Kappa 25/33/35/43/53/55

1740 UD-02-6033.01 Oil Reservoir Assembly

1828 UD-02-6015.45 Piston/Rod Assembly

1843 UD-02-1403.07 Washer

1844 UD-02-1403.09 Washer

1893 UD-02-1412.03 Washer

1964 UD-02-1502.03 Connecting Rod Pin (Kappa-33/43)

2048 UD-02-1506.15 Snap Ring

2051 UD-02-1506.15 Snap Ring

2136 UD-02-1519.28 Connecting Rod (Kappa-33/43/53)

2251 UD-02-1603.02 Oil Plug

2268 UD-02-1603.32 Head Plug

2587 UD-02-1805.20 Bolt

2589 UD-02-1805.31 Bolt

4801 UD-02-1101.C3 O-Ring

7947 UD-02-1804.21 Head Bolt

8120 UD-02-0903.50 Piston Diaphragm Desmopan

8151 UD-02-1202.63 Mounting Rail - Right Side

8152 UD-02-1202.64 Mounting Rail - Left Side

www.gnci.org

Important:






Kappa 43

www.gnci.org

Important:






Kappa 55GR8


4 UD-02-0001.06 Retaining Ring

133 UD-02-0006.02 Bearing (KAPPA-30/40/55)

155 UD-02-0007.01 Seal (KAPPA-30/40/55)

240 UD-02-0102.04 Diaphragm Bolt

365 UD-02-0202.52 Suction Elbow (KAPPA-55/75)

500 UD-02-0206.31 Piston Sleeve (KAPPA-55)

523 UD-02-0218.06 Body Plug

540 UD-02-0208.98 Oil Reservoir Cap

569 UD-02-0208.46 Accumulator Head

629 UD-02-0209.44 Pump Body (KAPPA-55)

698 UD-02-0214.01 Ball Bearing

794 UD-02-0301.14 Retainer Washer

803 UD-02-0301.30 Washer (KAPPA-30/40/55)

831 UD-02-0302.50 Spacer (KAPPA-30/40/55)

928 UD-02-0501.85 Flange

1038 UD-02-0604.18 Suction Nut

1072 UD-02-0605.09 Aluminum Gasket

1075 UD-02-0605.43 Gasket

1126 UD-02-0608.16 Air Valve Assembly

1295 UD-02-0903.08 Accumulator Diaphragm

1305 UD-02-0903.43 Piston Diaphragm Buna-N

1376 UD-02-1101.16 O-Ring

1381 UD-02-1101.27 O-Ring

1382 UD-02-1101.29 O-Ring

1386 UD-02-1101.33 O-Ring

1389 UD-02-1101.41 O-Ring

1407 UD-02-1101.62 O-Ring


1413 UD-02-1101.87 O-Ring

1434 UD-02-1101.D1 O-Ring

1490 UD-02-1203.27 Oil Reservoir

1570 UD-02-1205.07 Piston

1702 UD-02-6006.01 Valve Assembly

1722 UD-02-6017.13 Head Assembly

1740 UD-02-6033.01 Oil Reservoir Assembly

1799 UD-02-6015.27 Piston/Rod Assembly

1843 UD-02-1403.07 Washer

1844 UD-02-1403.09 Washer

1964 UD-02-1502.03 Connecting Rod Pin

2045 UD-02-1506.01 Snap Ring

2051 UD-02-1506.15 Snap Ring

2150 UD-02-1519.18 Connecting Rod

2251 UD-02-1603.02 Oil Plug

2268 UD-02-1603.32 Head Plug

2271 UD-02-1603.44 Plug

2582 UD-02-1805.04 Bolt

2588 UD-02-1805.21 Bolt

2589 UD-02-1805.31 Bolt

2602 UD-02-1805.25 Head Bolt (Allen-Old Style)

7250 UD-02-0501.02 Seal Retainer

7671 UD-02-1403.09 Washer

7948 UD-02-1804.45 Head Bolt (Hex-New Style)

8120 UD-02-0903.50 Piston Diaphragm Desmopan

8151 UD-02-1202.63 Mounting Rail - Right Side

8152 UD-02-1202.64 Mounting Rail - Left Side

www.gnci.org

Top Selling Accessories

Mag-1 Spray

Gun

11-852-00

GNC Original Mag-1 Spray Gun with Stainless Steel Whirler and Trigger. Used

by Pest Control, Lawn Care, Municipalities, Tree and Shrub Professionals.

Do-All Spray

Gun

11-855-00

GNC Mag-1 Gold Do-All Gun Used by Pest Control, Lawn Care & Tree/Shrub

Professionals. Includes: Spray Gun and 6 Additional Nozzles (3 Lawn Care & 3

Tree/Shrub)

Mag 2000

Lawn Spray

Gun

11-857-00

GNC Mag-2000 Lawn Gun Used by Lawn Care Professionals.

Nozzle sold separately.

12-857-15 Blue/Sm Nozzle; 12-857-16 Yellow/Med Nozzle; 12-857-17 Green/

Lg Nozzle

GI Kit

11-850-00

GNC GI Kit. Includes:

Mag-1 Gold Do-All Gun and 6 Additional Nozzles Used by Pest Control, Lawn

Care & Tree/Shrub Professionals *PLUS* GNC Mag-2000 Lawn Gun used by

Lawn Care Professionals.

Mighty Lite

Spray Gun

11-854-01

GNC Tree Gun. Extremely light weight and easy to use. Comes with 3 nozzles

to accommodate volumes of 1 GPM to 15 GPM. Adjustable barrel for jet

spraying and fine cone mist.

Root Feeder

Spray Gun

11-856-00

GNC Root Feeder. Includes: 1/4” thick heavy duty kick plate, 8” probe and

heat treated tip.

Roller Guides

Hannay

Hannay 4 Way Roller Guides

12" Reel = HA-9939-1012

18" Reel = HA-9939-1018

Measuring

Wheel

91-MW2200

GNC Industrial Measuring Wheel. Dual action reset buttons, collapsible to fit

conveniently into free carrying case.

Quick Disconnects

Brass Quick Disconnects. This is the portion that is attached to your hose. 22-QD-12 is for 1/2" Hose 22-QD-1238 is for 3/8" Hose

This is the portion that goes onto your spray gun. The standard size is 1/2" male pipe thread.

22-QD-12MPTPLUG

www.gnci.org


1 12-850-01 Mag-1 Series Grip #1

2 12-850-02 Mag-1 O-Ring #2

3 12-850-03 Mag-1 SS Washer #3

4 12-850-04 Mag-1 SS Valve Stem #4

5 12-850-05 Mag-1 Valve Spring #5

6 12-853-06 Mag-1 O-Ring #6

7 12-853-07 Mag-1 SS Whirler #7

8 12-850-08 Mag-1 Adjuster Body (Short) #8

9 12-850-09 Mag-1 Teflon Valve Seat #9

10 12-850-10 Mag-1 Adjuster Nut (Short) #10

11 12-853-11 Mag-1 Nozzle Cap #11

12 12-853-12S Mag-1 S (.3-.5GPM) Nozzle #12

12 12-853-12M Mag-1 Med (.5-2GPM) Nozzle #12

12 12-853-12L Mag-1 Lg (2-5GPM) Nozzle #12

12 12-853-12XL Mag-1 XL (3-7GPM) Nozzle #12

12 12-853-122XL Mag-1 2XL (6-11GPM) Nozzle #12


12 12-853-

12THREAD

NOZZLE 1/8 IN NPT THREADED

NOZ

13 12-853-13 Mag-1 O-Ring #13

14 12-850-14 Mag-1 Trigger Clip #14

15 12-850-15 Mag-1 Grip Gasket #15

16 12-850-16 Mag-1 3/4 Garden Hose Adpt #16


17 12-850-17 Mag-1 Adpt Gasket #17

18 12-850-18 Mag-1 SS Trigger #18

19 12-850-19N Mag-1 Lock Nut #19

20 12-850-20 Mag-1 Bolt #20

21 12-850-19 Mag-1 Nut #21 & #22

22 12-850-19 Mag-1 Nut #21 & #22

23 12-850-23 Mag-1 Gland #23

24 12-853-24 Mag-1 Set Screw #24

Featured Kits

13-852-25 MAG-I ORIGINAL NOZZLE CAP KIT

13-853-50

Mag-1 O-Ring Kit. Includes:

12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket.

13-853-60

Mag-1 Repair Kit. Includes:

12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket,

12-850-09 Teflon Valve Seat.

13-853-75

Mag-1 Rebuild Kit. Includes:


12-850-09 Teflon Valve Seat,

12-853-07 Whirler and 12-853-04 Stainless Steel Valve.

Important:






11-852-00 Mag-1

www.gnci.org


3 12-857-03 GUN PART MAG 2000 TRIGGER

LOCK

4 12-857-04 GUN PART MAG 2000 TRIGGER

5 12-857-05 GUN PART MAG 2000 PIN

6 12-857-06 GUN PART SPRING FOR MAG 2000

7 12-857-07 GUN PART MAG 2000 VALVE TIP

8 12-857-08 GUN PART MAG 2000 WASHER

9 12-857-09 GUN PART MAG 2000 VALVE STEM

10 12-857-10 GUN PART MAG 2000 BUSHING

11 12-857-11 GUN PART MAG 2000 O-RING

12 12-857-12 GUN PART MAG 2000 O-RING

13 12-857-13 GUN PART MAG 2000 SCREW

14 12-857-14 GUN PART MAG 2000 GAUGE PLUG

15 12-857-15 GNC MAG 2000 NOZZLE # 1 BLUE

16 12-857-16 GNC MAG 2000 NOZZLE #2 YELLOW

17 12-857-17 GNC MAG 2000 NOZZLE # 3 GREEN

Important:






Featured Kits

13-857-50

GNC MAG 2000 REPAIR KIT

Includes: 12-857-07 Valve, 12-857-08 Washer,

13-857-09 Valve Pin, 12-857-10 Nut,

12-857-11 O-Ring and 12-857-12 O-Ring

13-857-75

GNC MAG 2000 REBUILD KIT

Includes: 12-857-03 Handle A, 12-857-04

Handle B, 12-857-06 Spring, 12-857-

07 Valve, 12-857-09 Valve Pin, 12-857-10 Nut, 12-857-11 O-Ring and

12-857-12 O-Ring

11-857-00 Mag-2000

www.gnci.org

Important:








2 12-850-02 Mag-1 O-Ring #2

3 12-850-03 Mag-1 SS Washer #3



6 12-853-06 Mag-1 O-Ring #6

7 12-853-07 Mag-1 SS Whirler #7

8 12-855-08 Mag-1 Adj Body (Multi-Noz) #8


10 12-855-10 Mag-1 Adj Nut (Multi-Noz) #10

11 12-855-11 Mag-1 Nozzle Cap #11

12 12-853-12S Mag-1 S (.3-.5GPM) Nozzle #12

12 12-853-12M Mag-1 Med (.5-2GPM) Nozzle #12

12 12-853-12L Mag-1 Lg (2-5GPM) Nozzle #12

12 12-853-12XL Mag-1 XL (3-7GPM) Nozzle #12



12 12-853-

12THREAD

NOZZLE 1/8 IN NPT THREADED

NOZ

13 12-853-13 Mag-1 O-Ring #13


15 12-850-15 Mag-1 Grip Gasket #15


17 12-850-17 Mag-1 Adpt Gasket #17


18 12-850-18 Mag-1 SS Trigger #18

19 12-850-19N Mag-1 Lock Nut #19

20 12-850-20 Mag-1 Bolt #20

21 12-850-19 Mag-1 Nut #21 & #22

22 12-850-19 Mag-1 Nut #21 & #22

23 12-850-23 Mag-1 Gland #23

24 12-853-24 Mag-1 Set Screw #24

25 12-855-25 Mag-1 Nozzle Spacer #25

Featured Kits

13-855-25 DO-ALL NOZZLE CAP KIT

13-853-50



13-853-60




13-853-75





11-855-00 Mag-1 Do-All

www.gnci.org

Part # Description/Hole Diameter GPM @

200 PSI

GPM @

300 PSI

GPM @

400 PSI

GPM @

500 PSI

GPM @

600 PSI

GPM @

800 PSI

12-854-42 #5 Disc/ .078” 1.7 2.0 2.4 2.7 2.9 3.4

12-854-43 #6 Disc/ .093” 2.4 3.0 3.4 3.8 4.2 4.9

12-854-44 #7 Disc/ .109” 3.3 4.0 4.6 5.0 5.7 6.7

12-854-45 #8 Disc/ .125” 4.2 5.2 6.0 6.6 7.4 8.5

12-854-46 #10 Disc/ .156” 6.5 8.1 9.2 10.3 11.4 13.0

12-854-47 #12 Disc/ .187 9.8 12.0 13.9 15.5 17.0 19.9

12-854-48 #14 Disc/ .218 14.9 18.2 21.1 23.5 25.8 29.6

12-854-49 #16 Disc/ .250 18.8 23.0 26.5 29.6 32.5 37.1 22

Important:






11-854-00 Mighty Mag

www.gnci.org

11-854-00 Mighty Mag Con’t



2 12-850-02 Mag-1 O-Ring #2

3 12-850-03 Mag-1 SS Washer #3





15 12-850-15 Mag-1 Grip Gasket #15


17 12-850-17 Mag-1 Adpt Gasket #17

18 12-850-18 Mag-1 SS Trigger #18

19 12-850-19N Mag-1 Lock Nut #19

20 12-850-20 Mag-1 Bolt #20

21 12-850-19 Mag-1 Nut #21 & #22

22 12-850-19 Mag-1 Nut #21 & #22

23 12-850-23 Mag-1 Gland #23

25 12-854-25 Mighty Mag Barrel #25

26 12-854-26 Mighty Mag Cam Barrel #26

27 12-854-27 Mighty Mag Cam Nut #27

28 12-854-28 Mighty Mag Collar #28

29 12-854-29 Mighty Mag Set Screw #29

30 12-854-30 Mighty Mag Body #30

31 12-854-31 Mighty Mag Hex Nut #31

32 12-854-32 Mighty Mag Packing Nut #32

33 12-854-33 Mighty Mag Packing #33

34 12-854-34 GNC MIGHTY MAG VALVE STEM

35 12-854-35 Mighty Mag O-Ring #35

36 12-854-36 Mighty Mag Outer Tube #36

38 12-854-38 Mighty Mag Straightener #38

39 12-854-39 Mighty Mag Whirler #39

40 12-854-40 Mighty Mag Nozzle Vlv Body #40

41 12-854-41 Mighty Mag Gasket #41

42 12-854-42 Mighty Mag Disc #5 Ref #42








50 12-854-50 Mighty Mag Nozzle Cap #50

Featured Kits

13-853-50



13-853-60




13-853-75





www.gnci.org

Fittings

Part Number Description– MNPT X HB Straight

3A1412 1/4" MNPT X 1/2" Hose Barb

3A38 3/8" MPT X 3/8" Hose Barb


3A12 1/2" MNPT X 1/2" Hose Barb



3A34100 3/4" MPT X 1" Hose Barb

3A100 1" MPT X 1" Hose Barb

3A10034 1" MPT X 3/4" Hose Barb

3A114 1-1/4" MPT X 1" Hose Barb

Part Number Description– MGHT X HB Straight

3D3438 3/4" MGHT X 3/8" Hose Barb

3D3412 3/4" MGHT X 1/2" Hose Barb

Part Number Description—FNPT X HB Straight

3AF1238 1/2" FNPT X 3/8 Hose Barb

3AF3412 3/4" FNPT X 1/2 Hose Barb

Part Number Description- NMNPT Hex Plug

3F38 3/8" MNPT Hex Plug



3F100 1" MNPT Hex Plug

3F114 1-1/4" MNPT Hex Plug

3F11 1-1/2" MNPT Hex Plug

Part Number Description- MNPT X HB Elbow

3EL14 1/4" MPT X 1/4" Hose Barb





3EL12 1/2" MNPT X 1/2" Hose Barb






3EL34100 3/4" MPT X 1 Hose Barb

3EL100 1" MPT X 1" Hose Barb

3EL114 1-1/4" MPT X 1-1/4" Hose Barb

3EL112 1-1/2" MPT X 1-1/2" Hose Barb

3EL200 2" MPT X 2" Hose Barb

Part Number Description– FNPT X MNPT Street Elbow

3SE14 1/4" FNPT X 1/4" MNPT



3SE100 1" FNPT X 1" MNPT

3SE114 1-1/4" FNPT X 1-1/4" MNPT

Part Number Description– MNPT X MNPT Nipple

3M1238 1/2" MNPT X 3/8" MNPT

3M12 1/2" MNPT X 1/2" MNPT

3M34 3/4" MNPT X 3/4" MNPT

3M100 1" MNPT X 1" MNPT

3M114 1-1/4" MNPT X 1-1/4"

Part Number Description– MNPT X FNPT Reducer

3RB3414 3/4" MNPT X 1/4" FNPT

3RB3412 3/4" MNPT X 1/2 FNPT

3RB10012 1" MNPT X 1/2" FNPT

3RB10034 1" MNPT X 3/4" FNPT

Part Number Description– HB Tee

3T38 3/8" Hose Barb

3T12 1/2" Hose Barb

3T34 3/4" Hose Barb

Part Number Description– FNPT Threaded Tee

3TT12 1/2" FNPT

3TT34 3/4" FNPT

3TT100 1" FNPT

3TT114 1-1/4" FNPT

Part Number Description– FNPT Threaded Elbow

3LL12 1/2" FNPT X 1/2" FNPT

3LL34 3/4" FNPT X 3/4" FNPT

3LL100 1" FNPT X 1" FNPT

3LL114 1-1/4" FNPT X 1-1/4" FNPT

Polypropylene fittings are used for their resistance to acidic chemicals, as well as sunlight/UV exposure. They are often preferred for their black color to cre-ate a clean look throughout the sprayer.

www.gnci.org

Accessories

Poly Ball Valves 2 & 3 Way

Fiberglass-reinforced polypropylene body for strength and chemical resistance

Teflon seats for smooth operation and proper seal-ing characteristics

EPDM O-rings to handle most fertilizers and chemi-cals

Max. operating pressure for sizes up to 1-1⁄4" – 232 PSI (16 bar). For 1-1⁄2" and 2" – 145 PSI (10 bar).

Part No Description - 2 Way Valves

BV-2-050P 1/2" NPT 2 Way Ball Valve

BV-2-075P 3/4" NPT 2 Way Ball Valve

BV-2-100P 1" NPT 2 Way Ball Valve,

BV-2-125P 1-1/4" NPT 2 Way Ball Valve

BV-2-150P 1-1/2" NPT 2 Way Ball Valve

Part No Description - 3 Way Valves

BV-3-050P 1/2" NPT 3 Way Ball Valve, Poly

BV-3-075P 3/4" NPT 3 Way Ball Valve, Poly

BV-3-100P 1" NPT 3 Way Ball Valve, Poly

BV-3-125P 1-1/4" NPT 3 Way Ball Valve, Poly

BV-3-150P 1-1/2" NPT 3 Way Ball Valve, Poly

Mini Chrome-2 Way Valves

200 PSI rating (CWP)

-4(deg) – 250(deg) F temperature rating

Chromed brass body, ball and stem

TeflonÂ® seat and VitonÂ® seals

Part No Description - Male X Female

BV-2-018BMF 1/8" FNPT X 1/8" MNPT 2 Way

BV-VA-2-014BMF 1/4" FNPT X 1/4" MNPT 2 Way



Part No Description - Female X Female

BV-2-018BFF 1/8" FNPT X 1/8" FNPT 2 Way




www.gnci.org

Accessories

Part No Description—Complete Filter

LS-075-20C 3/4” Clear Bowl Suction Filter, 20 Mesh

LS-100-20C 1” Clear Bowl Suction Filter, 20 Mesh

Part No. Description—Components

LS-100-020CO Replacement O-Ring Will Fit Both 3/4” & 1”

LS-100-020CS Replacement Screen 20 Mesh Will Fit Both 3/4” & 1”


LS-100-20 1” “Y” Banjo Filter

LS-125-20 1-1/4” “Y” Banjo Filter

Part No. Description—Components

LS-125-G Replacement O-Ring Will Fit Both 1” & 1-1/4”

LS-120 Replacement Screen 20 Mesh Will Fit Both 1” & 1-1/4”


JB-AK1323W John Blue 12 Volt Pump Replacement Filter

SH-255-223 Shurflo 12 Volt Pump Replacement Filter 1/2” Hose Barb Inlet, 1/2” NPSM Female


42-950-200 0-200 PSI Liquid Filled Pressure Gauge 1/4” Bottom Mount



Part No Description

HY-3371 1/2" FNPT X 3/4" MNPT Outlet, Pump Output 10 GPM or Less (Pictured Left)

HY-3371-0028 3/4" MNPT X 3/4" MNPT Outlet, Pump Output 15-20 GPM (Pictured Right)

Agitators

www.gnci.org

Tank Lids & Baskets

Part Number Description

LD-BSK-0850 8" Tank Basket 8 OD X I.D. X 4.7" Deep, 18 Mesh

LD-BSK-1295 12" Tank Basket 12 OD X 11.3 I.D. X 9.4 Deep, 18 Mesh

LD-BSK-1670 16" Tank Basket 16 OD X I.D. X 7.1 Deep, 18 Mesh

Baskets

Size Lid P/N Basket P/N Style Description Fit Tank MFG

5” LD-05-63484 N/A 5” Lid Female

Threads

Fits Norwesco 15-25 Gallon

Tanks MFG after 2/1/00

6” LD-06-343047 N/A 6” Lid Female

Threads

Fits Snyder 15-50 Gallon

Tanks

8” LD-08-352221 LD-BSK-0850

8” Lid W/Rim Kit GNC Mfg Split Space Saver

prior to 2012

8” LD-08-63480 LD-BSK-0850

8” Lid Male Treads

Blue Center Vent

8" Polypropylene lid with

blue snap-in vent for select

Norwesco tanks manufac-

tured after 2/2/08

10” LD-10-67399 N/A

10” Lid Male

Threads

Norwesco Tank Lid Re-

placed 67105

W/Fillwell NO-10-67398

10” LD-10-343080 N/A

10” Lid Male Threads Fits Snyder 100-200 Gallon

PCO Tanks

12” LD-12-356241 LD-BSK-1295

Hinged Locking

GNC Mfg Tanks 075-100

Gallon Space Saver, GNC

050 Gallon Tanks Prior to

2015

16” LD-16-356061 LD-BSK-1670

16” Hinged Locking

GNC 200—400 Gallon

Space Saver, Most 300 &

500 Gallon Leg Tanks & All

Fiberglass

16” LD-16-60011 LD-BSK-1670

16" Norwesco Lid W/4" Center Lid/Air Vent

16” Norwesco Tank lid,

used on various Norwesco

tanks.

16” LD-16-63485 LD-BSK-1670

16" Norwesco Lid W/ Blue Snap-In Vent

16” Norwesco Tank lid,

used on various Norwesco

tanks.

www.gnci.org

Accessories

Part No Description - Bulk Head Fitting *POLY*

FT-BHF-012P 1/2" Bulk Head Fitting, EPDM Gasket, Opening 1-3/4", Poly Fitting

FT-BHF-034P 3/4" Bulk Head Fitting, EPDM Gasket, Opening 1-3/4", Poly Fitting

FT-BHF-100P 1" Bulk Head Fitting, EPDM Gasket, Opening 2-1/8", Poly Fitting

FT-BHF-114P 1-1/4" Bulk Head Fitting, EPDM Gasket, Opening 2-5/8", Poly Fitting

FT-BHF-112P 1-1/2" Bulk Head Fitting, EPDM Gasket, Opening 2-5/8", Poly Fitting

FT-BHF-200P 2" Bulk Head Fitting, EPDM Gasket, Opening 3-1/4", Poly Fitting

Bulkhead Fitting Bulkhead Tank Fittings are specifically designed for use in IBC (Intermediate Bulk Con-tainer) / Tank applications. Bulkhead Tank Fittings are available in glass injected poly-propylene and stainless steel materials

Part No Description— Gasket

FT-BHF-12/34G Gasket Only Fits 1/2" & 3/4" Bulk Head Poly Fittings

FT-BHF-100G Gasket Only Fits 1" Bulk Head Poly Fittings

FT-BHF114/112G Gasket Only Fits 1-1/4" & 1-1/2" Bulk Head Poly Fittings

Size Part Number A B C LID Description Lid

100 31-FIB-100 33” 38” 25” 16” 100 Gallon Fiberglass LD-12-356241

200 31-FIB-200 61” 40” 25” 16” 200 Gallon Fiberglass LD-12-356241

300 31-FIB-300 61” 40” 32.5” 16” 300 Gallon Fiberglass LD-16-356061

600 31-FIB-600 96” 46” 46.5” 16” 600 Gallon Fiberglass LD-16-356061

300 31-FIB-200/100 61” 40” 32.5” 16” 200/100 Split Fiberglass LD-16-356061

600 31-FIB-400/200 96” 46” 46.5” 16” 400/200 Split Fiberglass LD-16-356061

B

C

A

www.gnci.org

Size Part Number A B C D Description Lid

075 31-GTR-075 60” 39” 48” 14” 075 Gallon Space Saver LD-12-356241





C

B

D

Size Part Number A B C D Description Lid

100/100 34-SS-200G-10GPM-A 60” 41” 48” 30” 100/100G Split Space Saver LD-12-356241

100/200 34-SS-300G-10GPM-B 60” 57” 48” 30” 100/200G Split Space Saver LD-12-356241

200/200 34-SS-400G-10GPM-C 60” 74” 48” 30” 200/200G Split Space Saver LD-12-356241

100 31-GTS-100 60” 22” 48” 30” 100G Split Single Tank SpSav LD-12-356241

200 31-GTS-200 60” 38” 48” 30” 200G Split Single Tank SpSav LD-12-356241

A B B B

D

C

Space Saver Style Tanks

A

GNC Poly Tanks are a multi-purpose tank. They are well suited for nursery, pest control, agricultural and lawn care applications. These tanks feature rotational molding and do not require any saddles or steel supports. GNC tanks must be securely anchored for use in transportable applications. Flat spots are molded into both ends to provide mounting areas for agitation equipment. The tanks come without fittings installed.

www.gnci.org

Size Part Number W L H Lid Description Lid

100 NO-100-42835 30” 38” 30” 8” 100 Gallon PCO/Loaf LD-08-356241




325 NO-325-40217 38” 68” 48” 16” 325 Gallon Poly Leg LD-16-63485

325 NO-325Band-604778 N/A N/A N/A N/A 325 Tank Bands (2 Required) N/A

500 NO-500-47256 48” 75” 51” 16” 500 Gallon Poly Leg LD-16-63485

500 NO-500Band-67101 N/A N/A N/A N/A 500 Tank Bands (2 Required) N/A

Poly Tanks

PCO Tanks are a multi-purpose tank. PCO tanks are well suited for nursery, pest control, agricultural and lawn care applications. These tanks feature self-supporting legs and do not require any saddles or steel supports. PCO tanks must be securely anchored for use in transportable applications. Flat spots are molded into both ends to provide mounting areas for agitation equipment. The tanks come without fittings installed.

This elliptical tank style is designed to provide the greatest ca-pacity with the lowest center of gravity, making it the best de-sign available for transporting larger volumes. Norwesco ellipti-cal tanks feature molded-in legs that act as "baffles" to reduce sloshing and provide increased stability during transport. All Norwesco elliptical leg tanks require full length bottom sup-port as well as support bands. The 1600 flat bottom requires full length support but does not require bands.


025 31-GPC-025 19” 38” 10” 8” 025 Gallon PCO/Loaf LD-08-352221

050 31-GPC-050 19” 38” 18” 8” 050 Gallon PCO/Loaf LD-08-352221

product product catalog catalog - gnc industries · pdf file about gn industries, inc.: since...

Documents